| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
livepatch has a set of selftests that are used to validate the behavior of
the livepatching subsystem. One of the testcases in the livepatch
testsuite is test-ftrace.sh, which among other things, validates that
livepatching gracefully fails when ftrace is disabled. In the event that
ftrace cannot be disabled using 'sysctl kernel.ftrace_enabled=0', the test
will fail later due to it unexpectedly successfully loading the
test_klp_livepatch module.
While the livepatch selftests are careful to remove any of the livepatch
test modules between testcases to avoid this situation, ftrace may still
fail to be disabled if another trace is active on the system that was
enabled with FTRACE_OPS_FL_PERMANENT. For example, any active BPF programs
that use trampolines will cause this test to fail due to the trampoline
being implemented with register_ftrace_direct(). The following is an
example of such a trace:
tcp_drop (1) R I D tramp: ftrace_regs_caller+0x0/0x58
(call_direct_funcs+0x0/0x30)
direct-->bpf_trampoline_6442550536_0+0x0/0x1000
In order to make the test more resilient to system state that is out of its
control, this patch updates set_ftrace_enabled() to detect sysctl failures,
and skip the testrun when appropriate.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220216161100.3243100-1-void@manifault.com
|
|
check_result() uses "comm" to check expected results of selftests output
in dmesg. Everything works fine if timestamps in dmesg are unique. If
not, like in this example
[ 86.844422] test_klp_callbacks_demo: pre_unpatch_callback: test_klp_callbacks_mod -> [MODULE_STATE_LIVE] Normal state
[ 86.844422] livepatch: 'test_klp_callbacks_demo': starting unpatching transition
, "comm" fails with "comm: file 2 is not in sorted order". Suppress the
order checking with --nocheck-order option.
Fixes: 2f3f651f3756 ("selftests/livepatch: Use "comm" instead of "diff" for dmesg")
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
With procfs v3.3.16, the sysctl command doesn't print the set key and
value on error. This change breaks livepatch selftest test-ftrace.sh,
that tests the interaction of sysctl ftrace_enabled:
Make it work with all sysctl versions using '-q' option.
Explicitly print the final status on success so that it can be verified
in the log. The error message is enough on failure.
Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20200714091030.1611-1-pmladek@suse.com
|
|
BusyBox diff doesn't support the GNU diff '--LTYPE-line-format' options
that were used in the selftests to filter older kernel log messages from
dmesg output.
Use "comm" which is more available in smaller boot environments.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710183745.19730-1-joe.lawrence@redhat.com
|
|
Make it bit easier to parse the kernel logs during the selftests by
adding a "===== TEST: $test =====" delimiter when each individual test
begins.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-4-joe.lawrence@redhat.com
|
|
The livepatch selftests currently grep on "taints" to filter out
"tainting kernel with TAINT_LIVEPATCH" messages which may be logged when
loading livepatch modules.
Further filter the log to drop "loading out-of-tree module taints
kernel" in the rare case the klp_test modules have been built
out-of-tree.
Look for the longer "taints kernel" or "tainting kernel" strings to
avoid inadvertent partial matching.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-3-joe.lawrence@redhat.com
|
|
Inspired by commit f131d9edc29d ("selftests/lkdtm: Don't clear dmesg
when running tests"), keep a reference dmesg copy when beginning each
test. This way check_result() can compare against the initial copy
rather than relying upon an empty log.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200618181040.21132-2-joe.lawrence@redhat.com
|
|
This change makes the test feel more familiar with narrowing to a
typical usage by operating on a number of identical structure instances
and populating the same two new shadow variables symmetrically while
keeping the same testing and verification criteria for the extra
variables.
Signed-off-by: Yannick Cote <ycote@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200603182058.109470-4-ycote@redhat.com
|
|
The test-klp-callbacks script includes a few tests which rely on kernel
task timings that may not always execute as expected under system load.
These may generate out of sequence kernel log messages that result in
test failure.
Instead of using sleep timing windows to orchestrate these tests, add a
block_transition module parameter to communicate the test purpose and
utilize flush_queue() to serialize the test module's task output.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200603182058.109470-2-ycote@redhat.com
|
|
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
set_ftrace_enabled() contains unused local variable "sysctl". Remove it.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 35c9e74cff4c ("selftests/livepatch: Make dynamic debug setup and
restore generic") introduced setup_config() to set up the environment
for each test. It superseded set_dynamic_debug(). README still mentions
set_dynamic_debug(), so update it to setup_config() which should be used
now in every test.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
livepatch test configures the system and debug environment to run
tests. Some of these actions fail without root access and test
dumps several permission denied messages before it exits.
Fix test-state.sh to call setup_config instead of set_dynamic_debug
as suggested by Petr Mladek <pmladek@suse.com>
Fix it to check root uid and exit with skip code instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Pull tracing updates from Steven Rostedt:
"New tracing features:
- New PERMANENT flag to ftrace_ops when attaching a callback to a
function.
As /proc/sys/kernel/ftrace_enabled when set to zero will disable
all attached callbacks in ftrace, this has a detrimental impact on
live kernel tracing, as it disables all that it patched. If a
ftrace_ops is registered to ftrace with the PERMANENT flag set, it
will prevent ftrace_enabled from being disabled, and if
ftrace_enabled is already disabled, it will prevent a ftrace_ops
with PREMANENT flag set from being registered.
- New register_ftrace_direct().
As eBPF would like to register its own trampolines to be called by
the ftrace nop locations directly, without going through the ftrace
trampoline, this function has been added. This allows for eBPF
trampolines to live along side of ftrace, perf, kprobe and live
patching. It also utilizes the ftrace enabled_functions file that
keeps track of functions that have been modified in the kernel, to
allow for security auditing.
- Allow for kernel internal use of ftrace instances.
Subsystems in the kernel can now create and destroy their own
tracing instances which allows them to have their own tracing
buffer, and be able to record events without worrying about other
users from writing over their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency
tracers.
- Wider spread use of generic compare operations for use of bsearch
and friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes"
* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
tracing: Enable syscall optimization for MIPS
tracing: Use xarray for syscall trace events
tracing: Sample module to demonstrate kernel access to Ftrace instances.
tracing: Adding new functions for kernel access to Ftrace instances
tracing: Fix Kconfig indentation
ring-buffer: Fix typos in function ring_buffer_producer
ftrace: Use BIT() macro
ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
ftrace: Add helper find_direct_entry() to consolidate code
ftrace: Add another check for match in register_ftrace_direct()
ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
ftrace/samples: Add a sample module that implements modify_ftrace_direct()
ftrace: Add modify_ftrace_direct()
tracing: Add missing "inline" in stub function of latency_fsnotify()
tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
tracing: Use seq_buf_hex_dump() to dump buffers
...
|
|
Pull livepatching updates from Petr Mladek:
- New API to track system state changes done be livepatch callbacks. It
helps to maintain compatibility between livepatches.
- Update Kconfig help text. ORC is another reliable unwinder.
- Disable generic selftest timeout. Livepatch selftests have their own
per-operation fine-grained timeouts.
* tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
x86/stacktrace: update kconfig help text for reliable unwinders
livepatch: Selftests of the API for tracking system state changes
livepatch: Documentation of the new API for tracking system state changes
livepatch: Allow to distinguish different version of system state changes
livepatch: Basic API to track system state changes
livepatch: Keep replaced patches until post_patch callback is called
selftests/livepatch: Disable the timeout
|
|
|
|
Since livepatching depends upon ftrace handlers to implement "patched"
code functionality, verify that the ftrace_enabled sysctl value
interacts with livepatch registration as expected. At the same time,
ensure that ftrace_enabled is set and part of the test environment
configuration that is saved and restored when running the selftests.
Link: http://lkml.kernel.org/r/20191016113316.13415-4-mbenes@suse.cz
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Livepatch selftests currently save the current dynamic debug config and
tweak it for the selftests. The config is restored at the end. Make the
infrastructure generic, so that more variables can be saved and
restored.
Link: http://lkml.kernel.org/r/20191016113316.13415-3-mbenes@suse.cz
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Four selftests for the new API.
Link: http://lkml.kernel.org/r/20191030154313.13263-6-pmladek@suse.com
To: Jiri Kosina <jikos@kernel.org>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: live-patching@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") introduced a timeout per test. Livepatch tests could
run longer than 45 seconds, especially on slower machines. They do not
hang and they detect if something goes awry with internal accounting.
Better than looking for an arbitrary value, just disable the timeout for
livepatch selftests.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When generating config with 'make defconfig kselftest-merge' fragment
CONFIG_TEST_LIVEPATCH=m isn't set.
Rework to enable CONFIG_LIVEPATCH and CONFIG_DYNAMIC_DEBUG as well.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests. Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.
Note this functionality needs to keep in sync with:
- dynamic_debug input/output formatting
- functions affected by set_dynamic_debug()
For example, push_dynamic_debug() transforms:
kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
to the following:
file kernel/livepatch/transition.c line 530 =_
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).
Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'. This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new
skip() function.
Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add functions.sh to TEST_PROGS_EXTENDED so that it is installed along
with the rest of the selftests and they can be run.
Originally-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Adrian reports that 'make -C tools clean' results in removal of the
livepatch selftest shell scripts.
As per the selftest lib.mk file, TEST_PROGS are for test shell scripts,
not TEST_GEN_PROGS. Adjust the livepatch selftest Makefile accordingly.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The livepatch selftest functions.sh library uses "$*" and an
intermediate variable to extract and then pass arguments from function
to function call. The effect of this combination is that the argument
list is flattened into a single argument. Sometimes this is benign, but
in cases like __load_mod(), the modprobe invocation will interpret all
the module parameters as a single parameter.
Drop the intermediate variable and use the "$@" special parameter as
described in the bash manual.
Link: https://www.gnu.org/software/bash/manual/bash.html#Special-Parameters
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add a few livepatch modules and simple target modules that the included
regression suite can run tests against:
- basic livepatching (multiple patches, atomic replace)
- pre/post (un)patch callbacks
- shadow variable API
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
David Vernet
Miroslav Benes
Petr Mladek
Joe Lawrence
Yannick Cote
Michael Ellerman
Shuah Khan
Linus Torvalds
Anders Roxell