aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/memfd (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-02-26selftests/memfd: clean up mapping in mfd_fail_writeMike Kravetz1-0/+1
Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows: memfd-hugetlb: CREATE memfd-hugetlb: BASIC memfd-hugetlb: SEAL-WRITE memfd-hugetlb: SEAL-FUTURE-WRITE memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device ./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs opening: ./mnt/memfd fuse: DONE If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages. Fix by making sure to unmap in mfd_fail_write. Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08selftests/memfd: remove unused variableGreg Thelen1-1/+1
Commit 544029862cbb ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal") added an unused variable to mfd_assert_reopen_fd(). Delete the unused variable. Link: https://lkml.kernel.org/r/20210702045509.1517643-1-gthelen@google.com Fixes: 544029862cbb ("selftests/memfd: add tests for F_SEAL_FUTURE_WRITE seal") Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-10selftests/memfd: Fix implicit declaration warningsMichael Ellerman2-2/+2
The memfd tests emit several warnings: fuse_test.c:261:7: warning: implicit declaration of function 'open' fuse_test.c:67:6: warning: implicit declaration of function 'fcntl' memfd_test.c:397:6: warning: implicit declaration of function 'fallocate' memfd_test.c:64:7: warning: implicit declaration of function 'open' memfd_test.c:90:6: warning: implicit declaration of function 'fcntl' These are all caused by the test not including fcntl.h. Instead of including linux/fcntl.h, include fcntl.h, which should eventually cause the former to be included as well. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-23selftests: add build/cross-build dependency check scriptShuah Khan1-2/+12
Add build/cross-build dependency check script kselftest_deps.sh This script does the following: Usage: ./kselftest_deps.sh -[p] <compiler> [test_name] kselftest_deps.sh [-p] gcc kselftest_deps.sh [-p] gcc vm kselftest_deps.sh [-p] aarch64-linux-gnu-gcc kselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm - Should be run in selftests directory in the kernel repo. - Checks if Kselftests can be built/cross-built on a system. - Parses all test/sub-test Makefile to find library dependencies. - Runs compile test on a trivial C file with LDLIBS specified in the test Makefiles to identify missing library dependencies. - Prints suggested target list for a system filtering out tests failed the build dependency check from the TARGETS in Selftests the main Makefile when optional -p is specified. - Prints pass/fail dependency check for each tests/sub-test. - Prints pass/fail targets and libraries. - Default: runs dependency checks on all tests. - Optional test name can be specified to check dependencies for it. To make LDLIBS parsing easier - change gpio and memfd Makefiles to use the same temporary variable used to find and add libraries to LDLIBS. - simlify LDLIBS append logic in intel_pstate/Makefile. Results from run on x86_64 system (trimmed detailed pass/fail list): ======================================================== Kselftest Dependency Check for [./kselftest_deps.sh gcc ] results... ======================================================== Checked tests defining LDLIBS dependencies -------------------------------------------------------- Total tests with Dependencies: 55 Pass: 53 Fail: 2 -------------------------------------------------------- Targets passed build dependency check on system: bpf capabilities filesystems futex gpio intel_pstate membarrier memfd mqueue net powerpc ptp rseq rtc safesetid timens timers vDSO vm -------------------------------------------------------- FAIL: netfilter/Makefile dependency check: -lmnl FAIL: gpio/Makefile dependency check: -lmount -------------------------------------------------------- Targets failed build dependency check on system: gpio netfilter -------------------------------------------------------- Missing libraries system -lmnl -lmount -------------------------------------------------------- ======================================================== Results from run on x86_64 system with aarch64-linux-gnu-gcc: (trimmed detailed pass/fail list): ======================================================== Kselftest Dependency Check for [./kselftest_deps.sh aarch64-linux-gnu-gcc ] results... ======================================================== Checked tests defining LDLIBS dependencies -------------------------------------------------------- Total tests with Dependencies: 55 Pass: 41 Fail: 14 -------------------------------------------------------- Targets failed build dependency check on system: bpf capabilities filesystems futex gpio intel_pstate membarrier memfd mqueue net powerpc ptp rseq rtc timens timers vDSO vm -------------------------------------------------------- -------------------------------------------------------- Targets failed build dependency check on system: bpf capabilities gpio memfd mqueue net netfilter safesetid vm -------------------------------------------------------- Missing libraries system -lcap -lcap-ng -lelf -lfuse -lmnl -lmount -lnuma -lpopt -lz -------------------------------------------------------- ======================================================== Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-04-13selftests: Fix memfd test run-time regressionShuah Khan1-1/+2
Commit d3fd949abd3e ("selftests: Fix memfd to support relocatable build (O=objdir)") introduced regression run-time regression with a change to include programs that should be run from shell scripts to list of programs that run as independent tests. This fix restores the original designation. Fixes: d3fd949abd3e ("selftests: Fix memfd to support relocatable build (O=objdir)") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-26selftests: Fix memfd to support relocatable build (O=objdir)Shuah Khan1-5/+4
Fix memfd to support relocatable build (O=objdir). This calls out source files necessary to build tests and simplfies the dependency enforcement. Tested the following: Note that cross-build for fuse_mnt has dependency on -lfuse. make all make clean make kselftest-install O=/arm64_build/ ARCH=arm64 HOSTCC=gcc \ CROSS_COMPILE=aarch64-linux-gnu- TARGETS=memfd Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01memfd: add test for COW on MAP_PRIVATE and F_SEAL_FUTURE_WRITE mappingsJoel Fernandes (Google)1-0/+36
In this test, the parent and child both have writable private mappings. The test shows that without the patch in this series, the parent and child shared the same memory which is incorrect. In other words, COW needs to be triggered so any writes to child's copy stays local to the child. Link: http://lkml.kernel.org/r/20191107195355.80608-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Hugh Dickins <hughd@google.com> Cc: Nicolas Geoffray <ngeoffray@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05selftests/memfd: add tests for F_SEAL_FUTURE_WRITE sealJoel Fernandes (Google)1-0/+74
Add tests to verify sealing memfds with the F_SEAL_FUTURE_WRITE works as expected. Link: http://lkml.kernel.org/r/20190112203816.85534-3-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Shuah Khan <shuah@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-30selftests: memfd: split regular and hugetlbfs testsShuah Khan (Samsung OSG)2-9/+3
Split normal memfd and hugetlbfs tests to improve the test reporting. Remove run_fuse_test.sh and memfd_test from run_tests.sh and add them to the Makefile. Add memfd_test to TEST_GEN_PROGS to be run separately. Rename run_tests.sh to run_hugetlbfs_test.sh Add run_fuse_test.sh and run_hugetlbfs_test.sh to TEST_PROGS The report for non-root run wth this change is: TAP version 13 selftests: memfd: memfd_test ======================================== memfd: CREATE memfd: BASIC memfd: SEAL-WRITE memfd: SEAL-SHRINK memfd: SEAL-GROW memfd: SEAL-RESIZE memfd: SHARE-DUP memfd: SHARE-MMAP memfd: SHARE-OPEN memfd: SHARE-FORK memfd: SHARE-DUP (shared file-table) memfd: SHARE-MMAP (shared file-table) memfd: SHARE-OPEN (shared file-table) memfd: SHARE-FORK (shared file-table) memfd: DONE ok 1..1 selftests: memfd: memfd_test [PASS] selftests: memfd: run_fuse_test.sh ======================================== opening: ./mnt/memfd fuse: DONE ok 1..2 selftests: memfd: run_fuse_test.sh [PASS] selftests: memfd: run_hugetlbfs_test.sh ======================================== Please run memfd with hugetlbfs test as root not ok 1..3 selftests: memfd: run_hugetlbfs_test.sh [SKIP] Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-05-30selftests: memfd: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)1-5/+9
When memfd test is skipped because of unmet dependencies and/or unsupported configuration, it returns non-zero value which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Added an explicit check for root user at the start of memfd hugetlbfs test and return skip code if a non-root user attempts to run it. In addition, return skip code when not enough huge pages are available to run the test. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-02-21selftests/memfd: add run_fuse_test.sh to TEST_FILESAnders Roxell1-0/+1
While testing memfd tests, there is a missing script, as reported by kselftest: ./run_tests.sh: line 7: ./run_fuse_test.sh: No such file or directory Link: http://lkml.kernel.org/r/1517955779-11386-1-git-send-email-daniel.diaz@linaro.org Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-13selftests: memfd: add config fragment for fuseAnders Roxell1-0/+1
The memfd test requires to insert the fuse module (CONFIG_FUSE_FS). Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-01-31memfd-test: run fuse test on hugetlb backend memoryMarc-André Lureau3-9/+32
Link: http://lkml.kernel.org/r/20171107122800.25517-10-marcandre.lureau@redhat.com Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31memfd-test: move common code to a shared unitMarc-André Lureau5-40/+64
The memfd & fuse tests will share more common code in the following commits to test hugetlb support. Link: http://lkml.kernel.org/r/20171107122800.25517-9-marcandre.lureau@redhat.com Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31memfd-test: add 'memfd-hugetlb:' prefix when testing hugetlbfsMarc-André Lureau1-10/+16
Link: http://lkml.kernel.org/r/20171107122800.25517-8-marcandre.lureau@redhat.com Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31memfd-test: test hugetlbfs sealingMarc-André Lureau1-135/+15
Remove most of the special-casing of hugetlbfs now that sealing is supported. Link: http://lkml.kernel.org/r/20171107122800.25517-7-marcandre.lureau@redhat.com Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15selftests: memfd_test.c: fix compilation warning.Lei Yang1-2/+2
Replace '%d' by '%zu' to fix the following compilation warning. memfd_test.c:517:3: warning: format ‘%d’ expects argument of type ‘int’,but argument 2 has type ‘size_t’ [-Wformat=] printf("malloc(%d) failed: %m\n", mfd_def_size * 8); ^ memfd_test.c: In function ‘mfd_fail_grow_write’: memfd_test.c:537:3: warning: format ‘%d’ expects argument of type ‘int’,but argument 2 has type ‘size_t’ [-Wformat=] printf("malloc(%d) failed: %m\n", mfd_def_size * 8); Signed-off-by: Lei Yang <Lei.Yang@windriver.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman5-0/+5
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-25selftests/memfd: correct run_tests.sh permissionLi Zhijian1-0/+0
to fix the following issue: ------------------ TAP version 13 selftests: run_tests.sh ======================================== selftests: Warning: file run_tests.sh is not executable, correct this. not ok 1..1 selftests: run_tests.sh [FAIL] ------------------ Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-06selftests/memfd: add memfd_create hugetlbfs selftestMike Kravetz3-86/+357
With the addition of hugetlbfs support in memfd_create, the memfd selftests should verify correct functionality with hugetlbfs. Instead of writing a separate memfd hugetlbfs test, modify the memfd_test program to take an optional argument 'hugetlbfs'. If the hugetlbfs argument is specified, basic memfd_create functionality will be exercised on hugetlbfs. If hugetlbfs is not specified, the current functionality of the test is unchanged. Note that many of the tests in memfd_test test file sealing operations. hugetlbfs does not support file sealing, therefore for hugetlbfs all sealing related tests are skipped. In order to test on hugetlbfs, there needs to be preallocated huge pages. A new script (run_tests) is added. This script will first run the existing memfd_create tests. It will then, attempt to allocate the required number of huge pages before running the hugetlbfs test. At the end of testing, it will release any huge pages allocated for testing purposes. Link: http://lkml.kernel.org/r/1502495772-24736-3-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-11selftests: memfd: Align STACK_SIZE for ARM AArch64 systemOrson Zhai1-1/+1
The stack size should be 16 bytes aligned in arm64 system. The similar patch has been merged already. > <commit id: 1f78dda2cf5e4eeb00aee2a01c9515e2e704b4c0> > selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned > > There is a mandate of 16-byte aligned stack on AArch64 [1], so the > STACK_SIZE here should also be 16-byte aligned, otherwise we would > get an error when calling clone(). > > [1] http://lxr.free-electrons.com/source/arch/arm64/kernel/process.c#L265 > > Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> > Acked-by: Arnd Bergmann <arnd@arndb.de> > Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Orson Zhai <orson.zhai@linaro.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-23selftest/memfd/Makefile: Fix build errorSeongJae Park1-1/+1
Selftest for memfd shows build error as below: ``` gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ fuse_mnt.c -o /home/sjpark/linux/tools/testing/selftests/memfd/fuse_mnt /tmp/cc6NHdwJ.o: In function `main': fuse_mnt.c:(.text+0x249): undefined reference to `fuse_main_real' collect2: error: ld returned 1 exit status ``` The build fails because output file is specified without $(OUTPUT) and LDFLAGS is used though Makefile implicit rule is used. This commit fixes the error by specifying output file path with $(OUTPUT) and using LDLIBS instead of LDFLAGS. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: remove CROSS_COMPILE in dedicated Makefilebamvor.zhangjian@huawei.com1-1/+0
After previous clean up patches, memfd and timers could get CROSS_COMPILE from tools/testing/selftest/lib.mk. There is no need to preserve these definition. So, this patch remove them. Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: remove duplicated all and clean targetbamvor.zhangjian@huawei.com1-11/+3
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to indicate the test program, extended test program and test files. It is easy to understand the purpose of these files. But mix of compiled and uncompiled files lead to duplicated "all" and "clean" targets. In order to remove the duplicated targets, introduce TEST_GEN_PROGS, TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled objects. Also, the later patch will make use of TEST_GEN_XXX to redirect these files to output directory indicated by KBUILD_OUTPUT or O. And add this changes to "Contributing new tests(details)" of Documentation/kselftest.txt. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-03selftests: Make scripts executableBen Hutchings1-0/+0
Fixes: 87b2d44026e0 ("selftests: add memfd/sealing page-pinning tests") Fixes: 2bf9e0ab08c6 ("locking/static_keys: Provide a selftest") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-03selftests: memfd: Stop unnecessary rebuildsBen Hutchings1-6/+6
Instead of explicitly running the compiler, add dependencies and take advantage of implicit rules to build only as necessary. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-11-03selftests: Add missing #include directivesBen Hutchings1-0/+1
Several C programs fail to include the headers declaring all the functions they call, resulting in warnings or errors. After this, memfd_test.c is still missing some function declarations but can't easily get them because of a conflict between <linux/fcntl.h> and <sys/fcntl.h>. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-10-15selftests: memfd_test: Revised STACK_SIZE to make it 16-byte alignedChunyan Zhang1-1/+1
There is a mandate of 16-byte aligned stack on AArch64 [1], so the STACK_SIZE here should also be 16-byte aligned, otherwise we would get an error when calling clone(). [1] http://lxr.free-electrons.com/source/arch/arm64/kernel/process.c#L265 Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02selftest/memfd: include default header install pathTyler Baker1-0/+1
Include the default path for INSTALL_HDR_PATH to make it less intrusive when cross building. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02selftest/memfd: enable cross compilationTyler Baker1-3/+4
Use the CC variable instead of hard coding gcc. Also clean up the compiler options by creating a CFLAGS variable. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-13selftests: Introduce minimal shared logic for running testsMichael Ellerman1-3/+3
This adds a Make include file which most selftests can then include to get the run_tests logic. On its own this has the advantage of some reduction in repetition, and also means the pass/fail message is defined in fewer places. However the key advantage is it will allow us to implement install very simply in a subsequent patch. The default implementation just executes each program in $(TEST_PROGS). We use a variable to hold the default implementation of $(RUN_TESTS) because that gives us a clean way to override it if necessary, ie. using override. The mount, memory-hotplug and mqueue tests use that to provide a different implementation. Tests are not run via /bin/bash, so if they are scripts they must be executable, we add a+x to several. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-09-17selftests/memfd: Run test on all architecturesPranith Kumar1-21/+0
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-09-04memfd_test: Add missing argument to printf()Pranith Kumar1-1/+1
Add a missing path argument buf to printf() Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-09-04memfd_test: Make it work on 32-bit systemsPranith Kumar1-18/+16
This test currently fails on 32-bit systems since we use u64 type to pass the flags to fcntl. This commit changes this to use 'unsigned int' type for flags to fcntl making it work on 32-bit systems. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-08-29tools: selftests: fix build issue with make kselftests targetPhong Tran1-5/+5
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86' to 'x86'. Test by compilation. Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08selftests: add memfd/sealing page-pinning testsDavid Herrmann5-1/+450
Setting SEAL_WRITE is not possible if there're pending GUP users. This commit adds selftests for memfd+sealing that use FUSE to create pending page-references. FUSE is very helpful here in that it allows us to delay direct-IO operations for an arbitrary amount of time. This way, we can force the kernel to pin pages and then run our normal selftests. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08selftests: add memfd_create() + sealing testsDavid Herrmann3-0/+944
Some basic tests to verify sealing on memfds works as expected and guarantees the advertised semantics. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>