aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net/pmtu.sh (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08selftests: pmtu: Introduce FoU and GUE PMTU exceptions testsStefano Brivio1-0/+179
Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload, on IPv4 and IPv6 transport, that check that PMTU exceptions are created with the right value when exceeding the MTU on a link of the path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08selftests: pmtu: Introduce tests for IPv4/IPv6 over GENEVE over IPv4/IPv6Stefano Brivio1-31/+86
Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08selftests: pmtu: Introduce tests for IPv4/IPv6 over VXLAN over IPv4/IPv6Stefano Brivio1-18/+125
Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Change all occurrences of VxLAN to VXLAN (Jiri Benc) - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15selftests: pmtu: Add optional traffic captures for single testsStefano Brivio1-7/+53
If --trace is passed as an option and tcpdump is available, capture traffic for all relevant interfaces to per-test pcap files named <test>_<interface>.pcap. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15selftests: pmtu: Allow selection of single testsStefano Brivio1-0/+21
As number of tests is growing, it's quite convenient to allow single tests to be run. Display usage when the script is run with any invalid argument, keep existing semantics when no arguments are passed so that automated runs won't break. Instead of just looping on the list of requested tests, if any, check first that they exist, and go through them in a nested loop to keep the existing way to display test descriptions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: add basic IPv4 and IPv6 PMTU testsSabrina Dubroca1-4/+203
Commit d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") and follow-ups introduced some PMTU tests, but they all rely on tunneling, and, particularly, on VTI. These new tests use simple routing to exercise the generation and update of PMTU exceptions in IPv4 and IPv6. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: extend MTU parsing helper to locked MTUSabrina Dubroca1-0/+2
The mtu_parse helper introduced in commit f2c929feeccd ("selftests: pmtu: Factor out MTU parsing helper") can only handle "mtu 1234", but not "mtu lock 1234". Extend it, so that we can do IPv4 tests with PMTU smaller than net.ipv4.route.min_pmtu Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: Introduce check_pmtu_value()Stefano Brivio1-27/+22
Introduce and use a function that checks PMTU values against expected values and logs error messages, to remove some clutter. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18selftests: pmtu: properly redirect stderr to /dev/nullSabrina Dubroca1-2/+2
The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually send stderr to /dev/null, so when the netns doesn't exist, the error message is shown. Use "2> /dev/null" instead, so that those messages disappear, as was intended. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: detect correct binary to ping ipv6 addressesSabrina Dubroca1-1/+4
Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: maximum MTU for vti4 is 2^16-1-20Sabrina Dubroca1-1/+1
Since commit 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+2
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-30selftests: net: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)1-1/+4
When net test is skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Change psock_tpacket to use ksft_exit_skip() when a non-root user runs the test and add an explicit check for root and a clear message, instead of failing the test when /sys/power/state file open fails. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-04-27selftests: pmtu: Minimum MTU for vti6 is 68Stefano Brivio1-2/+2
A vti6 interface can carry IPv4 packets too. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18selftests: pmtu: Drop prints to kernel log from pmtu_vti6_link_change_mtuStefano Brivio1-2/+0
Reported-by: David Ahern <dsahern@gmail.com> Fixes: 1fad59ea1c34 ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti6_link_change_mtu testStefano Brivio1-6/+61
This test checks that MTU configured from userspace is used on link creation and changes, and that when it's not passed from userspace, it's calculated properly from the MTU of the lower layer. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti6_link_add_mtu testStefano Brivio1-1/+43
Same as pmtu_vti4_link_add_mtu test, but for IPv6. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti4_link_add_mtu testStefano Brivio1-1/+44
This test checks that MTU given on vti link creation is actually configured, and that tunnel is not created with an invalid MTU value. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add test_pmtu_vti4_exception testStefano Brivio1-10/+70
This test checks that PMTU exceptions are created only when needed on IPv4 routes with vti and xfrm, and their PMTU value is checked as well. We can't adopt the same approach as test_pmtu_vti6_exception() here, because on IPv4 administrative MTU changes won't be reflected directly on PMTU. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti6_default_mtu testStefano Brivio1-1/+17
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti4_default_mtu testStefano Brivio1-13/+73
This test checks that the MTU assigned by default to a vti (IPv4) interface created on top of veth is simply veth's MTU minus the length of the encapsulated IPv4 header. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Introduce support for multiple testsStefano Brivio1-26/+61
Introduce list of tests and their descriptions, and loop on it in main body. Tests will now just take care of calling setup with a list of "units" they need, and return 0 on success, 1 on failure, 2 if the test had to be skipped. Main script body will take care of displaying results and cleaning up after every test. Introduce guard variable so that we don't clean up twice in case of interrupts or unexpected failures. The pmtu_vti6_exception test can now run its third step even if the previous one failed, as we can return values from it. Also introduce support to display test descriptions, and display aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that in case of failure we can display them right under the outcome for each test. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Factor out MTU parsing helperStefano Brivio1-6/+11
...so that it can be used for any iproute command output. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Use namespace command prefix to fetch route mtuStefano Brivio1-7/+9
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I accidentally assumed route_get_* helpers would run from a single namespace. Make them a bit more generic, by passing the namespace command prefix as a parameter instead. Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Reverse return codes of functionsStefano Brivio1-16/+8
David suggests it's more intuitive to return non-zero on failures, and zero on success. No need to introduce tail 'return 0' in functions, they will return the exit code of the last command anyway. Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07selftests: net: Introduce first PMTU testStefano Brivio1-0/+163
One single test implemented so far: test_pmtu_vti6_exception checks that the PMTU of a route exception, caused by a tunnel exceeding the link layer MTU, is affected by administrative changes of the tunnel MTU. Creation of the route exception is checked too. Requested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.