aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/net
AgeCommit message (Collapse)AuthorFilesLines
2022-05-12net: selftests: Stress reuseport listenMartin KaFai Lau3-0/+132
This patch adds a test that has 300 VIPs listening on port 443. Each VIP:443 will have 80 listening socks by using SO_REUSEPORT. Thus, it will have 24000 listening socks. Before removing the port only listening_hash, all socks will be in the same port 443 bucket and inet_reuseport_add_sock() spends much time to walk through the bucket. After removing the port only listening_hash and move all usage to the port+addr lhash2, each bucket in the ideal case has 80 sk which is much smaller than before. Here is the test result from a qemu: Before: listen 24000 socks took 210.210485362 (~210s) After: listen 24000 socks took 0.207173 (~210ms) Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-0/+415
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11selftests: forwarding: tc_actions: allow mirred egress test to run on non-offloaded h2Vladimir Oltean1-1/+1
The host interfaces $h1 and $h2 don't have to be switchdev interfaces, but due to the fact that we pass $tcflags which may have the value of "skip_sw", we force $h2 to offload a drop rule for dst_ip, something which it may not be able to do. The selftest only wants to verify the hit count of this rule as a means of figuring out whether the packet was received, so remove the $tcflags for it and let it be done in software. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220510220904.284552-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09selftests net: add UDP GRO fraglist + bpf self-testsLina Wang4-0/+403
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used, check if udp packets and tcp packets are successfully delivered to user space. If wrong udp packets are delivered, udpgso_bench_rx will exit with "Initial byte out of range" Signed-off-by: Maciej enczykowski <maze@google.com> Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08selftests: forwarding: Add a tunnel-based test for L3 HW statsPetr Machata2-0/+110
Add a selftest that uses an IPIP topology and tests that L3 HW stats reflect the traffic in the tunnel. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-08selftests: lib: Add a generic helper for obtaining HW statsPetr Machata2-12/+15
The function get_l3_stats() from the test hw_stats_l3.sh will be useful for any test that wishes to work with L3 stats. Furthermore, it is easy to generalize to other HW stats suites (for when such are added). Therefore, move the code to lib.sh, rewrite it to have the same interface as the other stats-collecting functions, and generalize to take the name of the HW stats suite to collect as an argument. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05selftests: add ping test with ping_group_range tunedNicolas Dichtel1-0/+12
The 'ping' utility is able to manage two kind of sockets (raw or icmp), depending on the sysctl ping_group_range. By default, ping_group_range is set to '1 0', which forces ping to use an ip raw socket. Let's replay the ping tests by allowing 'ping' to use the ip icmp socket. After the previous patch, ipv4 tests results are the same with both kinds of socket. For ipv6, there are a lot a new failures (the previous patch fixes only two cases). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-3/+40
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04selftests: router.sh: Add a diagramPetr Machata1-0/+18
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: router_vid_1: Add a diagram, fix coding stylePetr Machata1-1/+26
It is customary for selftests to have a comment with a topology diagram, which serves to illustrate the situation in which the test is done. This selftest lacks it. Add it. While at it, fix the list of tests so that the test names are enumerated one at a line. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: functional tests for the userspace PM typeKishen Maloor1-0/+779
This change adds a selftest script that performs a comprehensive behavioral/functional test of all userspace PM capabilities by exercising all the newly added APIs and changes to support said capabilities. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: create listeners to receive MPJsKishen Maloor1-0/+54
This change updates the "pm_nl_ctl" testing sample with a "listen" option to bind a MPTCP listening socket to the provided addr+port. This option is exercised in testing subflow initiation scenarios in conjunction with userspace path managers where the MPTCP application does not hold an active listener to accept requests for new subflows. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: capture netlink eventsKishen Maloor1-7/+157
This change adds to self-testing support for the MPTCP netlink interface by capturing various MPTCP netlink events (and all their metadata) associated with connections, subflows and address announcements. It is used in self-testing scripts that exercise MPTCP netlink commands to precisely validate those operations by examining the dispatched MPTCP netlink events in response to those commands. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROYKishen Maloor1-0/+115
This change updates the "pm_nl_ctl" testing sample with a "dsf" (destroy subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_DESTROY over the chosen MPTCP connection. E.g. ./pm_nl_ctl dsf lip 10.0.2.1 lport 44567 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATEKishen Maloor1-0/+129
This change updates the "pm_nl_ctl" testing sample with a "csf" (create subflow) option to support the newly added netlink interface command MPTCP_PM_CMD_SUBFLOW_CREATE over the chosen MPTCP connection. E.g. ./pm_nl_ctl csf lip 10.0.2.1 lid 23 rip 10.0.2.2 rport 56789 token 823274047 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_REMOVEKishen Maloor1-0/+52
This change updates the "pm_nl_ctl" testing sample with a "rem" (remove) option to support the newly added netlink interface command MPTCP_PM_CMD_REMOVE to issue a REMOVE_ADDR signal over the chosen MPTCP connection. E.g. ./pm_nl_ctl rem token 823274047 id 23 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-04selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCEKishen Maloor1-0/+131
This change updates the "pm_nl_ctl" testing sample with an "ann" (announce) option to support the newly added netlink interface command MPTCP_PM_CMD_ANNOUNCE to issue ADD_ADDR advertisements over the chosen MPTCP connection. E.g. ./pm_nl_ctl ann 192.168.122.75 token 823274047 id 25 dev enp1s0 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-03selftests: mptcp: ADD_ADDR echo test with missing userspace daemonMat Martineau1-0/+11
Check userspace PM behavior to ensure ADD_ADDR echoes are only sent when there is an active userspace daemon. If the daemon is restarting or hasn't loaded yet, the missing echo will cause the peer to retransmit the ADD_ADDR - and hopefully the daemon will be ready to receive it at that later time. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03selftests/net: so_txtime: usage(): fix documentation of default clockMarc Kleine-Budde1-1/+1
The program uses CLOCK_TAI as default clock since it was added to the Linux repo. In commit: | 040806343bb4 ("selftests/net: so_txtime multi-host support") a help text stating the wrong default clock was added. This patch fixes the help text. Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-03selftests/net: so_txtime: fix parsing of start time stamp on 32 bit systemsMarc Kleine-Budde1-1/+1
This patch fixes the parsing of the cmd line supplied start time on 32 bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot hold a timestamp in nano second resolution. Fixes: 040806343bb4 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-03selftests: forwarding: lib: Add start_traffic_pktsize() helpersPetr Machata1-3/+18
Add two helpers, start_traffic_pktsize() and start_tcp_traffic_pktsize(), that allow explicit overriding of packet size. Change start_traffic() and start_tcp_traffic() to dispatch through these helpers with the default packet size. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-03selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is operationalIdo Schimmel1-0/+3
In emulated environments, the bridge ports enslaved to br1 get a carrier before changing br1's PVID. This means that by the time the PVID is changed, br1 is already operational and configured with an IPv6 link-local address. When the test is run with netdevs registered by mlxsw, changing the PVID is vetoed, as changing the VID associated with an existing L3 interface is forbidden. This restriction is similar to the 8021q driver's restriction of changing the VID of an existing interface. Fix this by taking br1 down and bringing it back up when it is fully configured. With this fix, the test reliably passes on top of both the SW and HW data paths (emulated or not). Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02selftests: forwarding: add Per-Stream Filtering and Policing test for OcelotVladimir Oltean1-0/+235
The Felix VSC9959 switch in NXP LS1028A supports the tc-gate action which enforced time-based access control per stream. A stream as seen by this switch is identified by {MAC DA, VID}. We use the standard forwarding selftest topology with 2 host interfaces and 2 switch interfaces. The host ports must require timestamping non-IP packets and supporting tc-etf offload, for isochron to work. The isochron program monitors network sync status (ptp4l, phc2sys) and deterministically transmits packets to the switch such that the tc-gate action either (a) always accepts them based on its schedule, or (b) always drops them. I tried to keep as much of the logic that isn't specific to the NXP LS1028A in a new tsn_lib.sh, for future reuse. This covers synchronization using ptp4l and phc2sys, and isochron. The cycle-time chosen for this selftest isn't particularly impressive (and the focus is the functionality of the switch), but I didn't really know what to do better, considering that it will mostly be run during debugging sessions, various kernel bloatware would be enabled, like lockdep, KASAN, etc, and we certainly can't run any races with those on. I tried to look through the kselftest framework for other real time applications and didn't really find any, so I'm not sure how better to prepare the environment in case we want to go for a lower cycle time. At the moment, the only thing the selftest is ensuring is that dynamic frequency scaling is disabled on the CPU that isochron runs on. It would probably be useful to have a blacklist of kernel config options (checked through zcat /proc/config.gz) and some cyclictest scripts to run beforehand, but I saw none of those. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220501112953.3298973-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-02selftests: net: vrf_strict_mode_test: add support to select a test to runJaehee Park1-9/+39
Add a boilerplate test loop to run all tests in vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to run. Remove the vrf_strict_mode_tests function which is now unused. Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-29selftests/net/forwarding: add missing tests to MakefileHangbin Liu1-0/+33
When generating the selftests to another folder, the fixed tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net/forwarding" INSTALL_PATH=/tmp/kselftests Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29selftests/net: add missing tests to MakefileHangbin Liu1-1/+2
When generating the selftests to another folder, the fixed tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29selftests: mptcp: Add tests for userspace PM typeMat Martineau1-0/+66
These tests ensure that the in-kernel path manager is bypassed when the userspace path manager is configured. Kernel code is still responsible for ADD_ADDR echo, so also make sure that's working. Tested-by: Geliang Tang <geliang.tang@suse.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-27selftests: mptcp: print extra msg in chk_csum_nrGeliang Tang1-1/+10
When the multiple checksum errors occur in chk_csum_nr(), print the numbers of the errors as an extra message. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27selftests: mptcp: check MP_FAIL response mibsGeliang Tang1-3/+35
This patch extends chk_fail_nr to check the MP_FAIL response mibs. Add a new argument invert for chk_fail_nr to allow it can check the MP_FAIL TX and RX mibs from the opposite direction. When the infinite map is received before the MP_FAIL response, the response will be lost. A '-' can be added into fail_tx or fail_rx to represent that MP_FAIL response TX or RX can be lost when doing the checks. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27selftests: mptcp: add infinite map testcaseGeliang Tang2-1/+77
Add the single subflow test case for MP_FAIL, to test the infinite mapping case. Use the test_linkfail value to make 128KB test files. Add a new function reset_with_fail(), in it use 'iptables' and 'tc action pedit' rules to produce the bit flips to trigger the checksum failures. Set validate_checksum to enable checksums for the MP_FAIL tests without passing the '-C' argument. Set check_invert flag to enable the invert bytes check for the output data in check_transfer(). Instead of the file mismatch error, this test prints out the inverted bytes. Add a new function pedit_action_pkts() to get the numbers of the packets edited by the tc pedit actions. Print this numbers to the output. Also add the needed kernel configures in the selftests config file. Suggested-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add a test for local_termination.shVladimir Oltean1-0/+299
This tests the capability of switch ports to filter out undesired traffic. Different drivers are expected to have different capabilities here (so some may fail and some may pass), yet the test still has some value, for example to check for regressions. There are 2 kinds of failures, one is when a packet which should have been accepted isn't (and that should be fixed), and the other "failure" (as reported by the test) is when a packet could have been filtered out (for being unnecessary) yet it was received. The bridge driver fares particularly badly at this test: TEST: br0: Unicast IPv4 to primary MAC address [ OK ] TEST: br0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: br0: Unicast IPv4 to unknown MAC address [FAIL] reception succeeded, but should have failed TEST: br0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: br0: Unicast IPv4 to unknown MAC address, allmulti [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv4 to joined group [ OK ] TEST: br0: Multicast IPv4 to unknown group [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: br0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: br0: Multicast IPv6 to joined group [ OK ] TEST: br0: Multicast IPv6 to unknown group [FAIL] reception succeeded, but should have failed TEST: br0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: br0: Multicast IPv6 to unknown group, allmulti [ OK ] mainly because it does not implement IFF_UNICAST_FLT. Yet I still think having the test (with the failures) is useful in case somebody wants to tackle that problem in the future, to make an easy before-and-after comparison. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add a no_forwarding.sh testVladimir Oltean1-0/+261
Bombard a standalone switch port with various kinds of traffic to ensure it is really standalone and doesn't leak packets to other switch ports. Also check for switch ports in different bridges, and switch ports in a VLAN-aware bridge but having different pvids. No forwarding should take place in either case. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add helper for retrieving IPv6 link-local address of interfaceVladimir Oltean1-0/+9
Pinging an IPv6 link-local multicast address selects the link-local unicast address of the interface as source, and we'd like to monitor for that in tcpdump. Add a helper to the forwarding library which retrieves the link-local IPv6 address of an interface, to make that task easier. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add helpers for IP multicast group joins/leavesVladimir Oltean1-0/+38
Extend the forwarding library with calls to some small C programs which join an IP multicast group and send some packets to it. Both IPv4 and IPv6 groups are supported. Use cases range from testing IGMP/MLD snooping, to RX filtering, to multicast routing. Testing multicast traffic using msend/mreceive is intended to be done using tcpdump. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: multiple instances in tcpdump helperJoachim Wiberg1-7/+19
Extend tcpdump_start() & C:o to handle multiple instances. Useful when observing bridge operation, e.g., unicast learning/flooding, and any case of multicast distribution (to these ports but not that one ...). This means the interface argument is now a mandatory argument to all tcpdump_*() functions, hence the changes to the ocelot flower test. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add TCPDUMP_EXTRA_FLAGS to lib.shJoachim Wiberg1-1/+2
For some use-cases we may want to change the tcpdump flags used in tcpdump_start(). For instance, observing interfaces without the PROMISC flag, e.g. to see what's really being forwarded to the bridge interface. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: forwarding: add option to run tests with stable MAC addressesVladimir Oltean1-0/+36
By default, DSA switch ports inherit their MAC address from the DSA master. This works well for practical situations, but some selftests like bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged DSA ports, and require the bridge to forward packets between the standalone ports. Due to the bridge seeing that the MAC DA it needs to forward is present as a local FDB entry (it coincides with the MAC address of the bridge ports), the test packets are not forwarded, but terminated locally on br0. In turn, this makes the ping and ping6 tests fail. Address this by introducing an option to have stable MAC addresses. When mac_addr_prepare is called, the current addresses of the netifs are saved and replaced with 00:01:02:03:04:${netif number}. Then when mac_addr_restore is called at the end of the test, the original MAC addresses are restored. This ensures that the MAC addresses are unique, which makes the test pass even for DSA ports. The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS, which DSA should set to true, all others behave as before. By hooking the calls to mac_addr_prepare and mac_addr_restore within the forwarding lib itself, we do not need to patch each individual selftest, the only requirement is that pre_cleanup is called. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23selftests: mptcp: add infinite map mibs checkGeliang Tang1-1/+35
This patch adds a function chk_infi_nr() to check the mibs for the infinite mapping. Invoke it in chk_join_nr() when validate_checksum is set. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131Arun Ajith S2-0/+256
Add a new neighbour cache entry in STALE state for routers on receiving an unsolicited (gratuitous) neighbour advertisement with target link-layer-address option specified. This is similar to the arp_accept configuration for IPv4. A new sysctl endpoint is created to turn on this behaviour: /proc/sys/net/ipv6/conf/interface/accept_unsolicited_na. Signed-off-by: Arun Ajith S <aajith@arista.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13selftests: net: fib_rule_tests: add support to select a test to runAlaa Mohamed1-1/+11
Add boilerplate test loop in test to run all tests in fib_rule_tests.sh Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-12selftests: forwarding: new test, verify host mdb entriesJoachim Wiberg2-0/+104
Boiler plate for testing static mdb entries. This first test verifies adding and removing host mdb entries for all supported types: IPv4, IPv6, and MAC multicast. Signed-off-by: Joachim Wiberg <troglobit@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-11selftests/mptcp: add diag listen testsFlorian Westphal1-0/+38
Check dumping of mptcp listener sockets: 1. filter by dport should not return any results 2. filter by sport should return listen sk 3. filter by saddr+sport should return listen sk 4. no filter should return listen sk Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-03selftests: net: fix nexthop warning cleanup double ip typoNikolay Aleksandrov1-2/+2
I made a stupid typo when adding the nexthop route warning selftest and added both $IP and ip after it (double ip) on the cleanup path. The error doesn't show up when running the test, but obviously it doesn't cleanup properly after it. Fixes: 392baa339c6a ("selftests: net: add delete nexthop route warning test") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01selftests: net: add delete nexthop route warning testNikolay Aleksandrov1-0/+14
Add a test which causes a WARNING on kernels which treat a nexthop route like a normal route when comparing for deletion and a device is specified. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). Repro steps: $ ip nexthop add id 12 via 172.16.1.3 dev veth1 $ ip route add 172.16.101.1/32 nhid 12 $ ip route delete 172.16.101.1/32 dev veth1 Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-28Revert "selftests: net: Add tls config dependency for tls selftests"Jakub Kicinski1-1/+0
This reverts commit d9142e1cf3bbdaf21337767114ecab26fe702d47. The test is supposed to run cleanly with TLS is disabled, to test compatibility with TCP behavior. I can't repro the failure [1], the problem should be debugged rather than papered over. Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Fixes: d9142e1cf3bb ("selftests: net: Add tls config dependency for tls selftests") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-28selftests: net: Add tls config dependency for tls selftestsNaresh Kamboju1-0/+1
selftest net tls test cases need TLS=m without this the test hangs. Enabling config TLS solves this problem and runs to complete. - CONFIG_TLS=m Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26selftests: tls: skip cmsg_to_pipe tests with TLS=nJakub Kicinski1-0/+6
These are negative tests, testing TLS code rejects certain operations. They won't pass without TLS enabled, pure TCP accepts those operations. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: d87d67fd61ef ("selftests: tls: test splicing cmsgs") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-25selftests: test_vxlan_under_vrf: Fix broken test caseIdo Schimmel1-4/+4
The purpose of the last test case is to test VXLAN encapsulation and decapsulation when the underlay lookup takes place in a non-default VRF. This is achieved by enslaving the physical device of the tunnel to a VRF. The binding of the VXLAN UDP socket to the VRF happens when the VXLAN device itself is opened, not when its physical device is opened. This was also mentioned in the cited commit ("tests that moving the underlay from a VRF to another works when down/up the VXLAN interface"), but the test did something else. Fix it by reopening the VXLAN device instead of its physical device. Before: # ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [FAIL] After: # ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [ OK ] Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds34-1183/+4367
Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-23Merge tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds2-2/+2
Pull Kselftest updates from Shuah Khan: "Several build and cleanup fixes: - removing obsolete config options - removing dependency on internal kernel macros - adding config options - several build fixes related to headers and install paths" * tag 'linux-kselftest-next-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (22 commits) selftests: Fix build when $(O) points to a relative path selftests: netfilter: fix a build error on openSUSE selftests: kvm: add generated file to the .gitignore selftests/exec: add generated files to .gitignore selftests: add kselftest_install to .gitignore selftests/rtc: continuously read RTC in a loop for 30s selftests/lkdtm: Add UBSAN config selftests/lkdtm: Remove dead config option selftests/exec: Rename file binfmt_script to binfmt_script.py selftests: Use -isystem instead of -I to include headers selftests: vm: remove dependecy from internal kernel macros selftests: vm: Add the uapi headers include variable selftests: mptcp: Add the uapi headers include variable selftests: net: Add the uapi headers include variable selftests: landlock: Add the uapi headers include variable selftests: kvm: Add the uapi headers include variable selftests: futex: Add the uapi headers include variable selftests: Correct the headers install path selftests: Add and export a kernel uapi headers path selftests: set the BUILD variable to absolute path ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.