path: root/tools/testing/selftests/powerpc/math (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-08-03selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUsMichael Ellerman5-5/+18
Some of our tests use VSX or newer VMX instructions, so need to be skipped on older CPUs to avoid SIGILL'ing. Similarly TAR was added in v2.07, and the PMU event used in the stcx fail test only works on Power8 or later. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au
2020-07-15selftests/powerpc: Add FPU denormal testNicholas Piggin3-1/+40
Add a testcase that tries to trigger the FPU denormal exception on Power8 or earlier CPUs. Prior to commit 4557ac6b344b ("powerpc/64s/exception: Fix 0x1500 interrupt handler crash") this would trigger a crash such as: Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ip6table_filter ip6_tables iptable_filter fuse kvm_hv binfmt_misc squashfs mlx4_ib ib_uverbs dm_multipath scsi_dh_rdac scsi_dh_alua ib_core mlx4_en sr_mod cdrom bnx2x lpfc mlx4_core crc_t10dif scsi_transport_fc sg mdio vmx_crypto crct10dif_vpmsum leds_powernv powernv_rng rng_core led_class powernv_op_panel sunrpc ip_tables x_tables autofs4 CPU: 159 PID: 6854 Comm: fpu_denormal Not tainted 5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828 #192 NIP: c0000000000100ec LR: c00000000001b85c CTR: 0000000000000000 REGS: c000001dd818f770 TRAP: 1500 Not tainted (5.8.0-rc2-gcc-8.2.0-00092-g4ec7aaab0828) MSR: 900000000290b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002884 XER: 20000000 CFAR: c00000000001005c IRQMASK: 1 GPR00: c00000000001c4c8 c000001dd818fa00 c00000000171c200 c000001dd8101570 GPR04: 0000000000000000 c000001dd818fe90 c000001dd8101590 000000000000001d GPR08: 0000000000000010 0000000000002000 c000001dd818fe90 fffffffffc48ac60 GPR12: 0000000000002200 c000001ffff4f480 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 00007fffab225b40 0000000000000001 c000000001757168 GPR24: c000001dd8101570 c0000018027b00f0 c000001dd8101570 c000000001496098 GPR28: c00000000174ad05 c000001dd8100000 c000001dd8100000 c000001dd8100000 NIP save_fpu+0xa8/0x2ac LR __giveup_fpu+0x2c/0xd0 Call Trace: 0xc000001dd818fa80 (unreliable) giveup_all+0x118/0x120 __switch_to+0x124/0x6c0 __schedule+0x390/0xaf0 do_task_dead+0x70/0x80 do_exit+0x8fc/0xe10 do_group_exit+0x64/0xd0 sys_exit_group+0x24/0x30 system_call_exception+0x164/0x270 system_call_common+0xf0/0x278 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Split out of fix patch, add oops log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200708074942.1713396-1-npiggin@gmail.com
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner10-50/+10
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28selftests/powerpc: Fix Makefiles for headers_install changeMichael Ellerman1-0/+1
Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") introduced a requirement that Makefiles more than one level below the selftests directory need to define top_srcdir, but it didn't update any of the powerpc Makefiles. This broke building all the powerpc selftests with eg: make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc' BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment' ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make[2]: *** No rule to make target '../../../../scripts/subarch.include'. make[2]: Failed to remake makefile '../../../../scripts/subarch.include'. Makefile:38: recipe for target 'alignment' failed Fix it by setting top_srcdir in the affected Makefiles. Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-14selftests/powerpc: Fix remaining fallout from recent changesMichael Ellerman1-8/+8
In benchmarks we need to use $(TEST_GEN_PROGS) after we include lib.mk, because lib.mk does the substitution to add $(OUTPUT). In math the vmx and fpu names were typoed so they no longer matched correctly, put back the 'v' and 'f'. In tm we need to substitute $(OUTPUT) into SIGNAL_CONTEXT_CHK_TESTS so that the rule matches. In pmu there is an extraneous ':' on the end of $$BUILD_TARGET for the clean and install rules, which breaks the logic in the child Makefiles. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: enable O and KBUILD_OUTPUTbamvor.zhangjian@huawei.com1-6/+6
Enable O and KBUILD_OUTPUT for kselftest. User could compile kselftest to another directory by passing O or KBUILD_OUTPUT. And O is high priority than KBUILD_OUTPUT. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-05selftests: remove duplicated all and clean targetbamvor.zhangjian@huawei.com1-9/+4
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to indicate the test program, extended test program and test files. It is easy to understand the purpose of these files. But mix of compiled and uncompiled files lead to duplicated "all" and "clean" targets. In order to remove the duplicated targets, introduce TEST_GEN_PROGS, TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled objects. Also, the later patch will make use of TEST_GEN_XXX to redirect these files to output directory indicated by KBUILD_OUTPUT or O. And add this changes to "Contributing new tests(details)" of Documentation/kselftest.txt. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-11-17selftests/powerpc: Move shared headers into new include dirSimon Guo3-6/+6
There are some functions, especially register related, which can be shared across multiple selftests/powerpc test directories. This patch creates a new include directory to store those shared files, so that the file layout becomes more neat. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> [mpe: Reworked to move the headers only] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-06selftests/powerpc: Add missing binaries to .gitignoresMichael Ellerman1-0/+1
Some of the recent new selftests were missing additions to .gitignore, add them now. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04selftests/powerpc: Move VMX stack frame macros to header fileCyril Bur1-84/+1
Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04selftests/powerpc: Rework FPU stack placement macros and move to header fileCyril Bur1-68/+5
The FPU regs are placed at the top of the stack frame. Currently the position expected to be passed to the macro. The macros now should be passed the stack frame size and from there they can calculate where to put the regs, this makes the use simpler. Also move them to a header file to be used in an different area of the powerpc selftests Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04selftests/powerpc: Check for VSX preservation across userspace preemptionCyril Bur3-1/+212
Ensure the kernel correctly switches VSX registers correctly. VSX registers are all volatile, and despite the kernel preserving VSX across syscalls, it doesn't have to. Test that during interrupts and timeslices ending the VSX regs remain the same. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Test FPU and VMX regs in signal ucontextCyril Bur4-1/+296
Load up the non volatile FPU and VMX regs and ensure that they are the expected value in a signal handler Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Test preservation of FPU and VMX regs across preemptionCyril Bur6-3/+310
Loop in assembly checking the registers with many threads. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Test the preservation of FPU and VMX regs across syscallCyril Bur6-0/+553
Test that the non volatile floating point and Altivec registers get correctly preserved across the fork() syscall. fork() works nicely for this purpose, the registers should be the same for both parent and child Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Add include guards to basic_asm.h, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>