aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/powerpc (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-03-02selftests/powerpc: Test FPU and VMX regs in signal ucontextCyril Bur4-1/+296
Load up the non volatile FPU and VMX regs and ensure that they are the expected value in a signal handler Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Test preservation of FPU and VMX regs across preemptionCyril Bur6-3/+310
Loop in assembly checking the registers with many threads. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Test the preservation of FPU and VMX regs across syscallCyril Bur8-1/+625
Test that the non volatile floating point and Altivec registers get correctly preserved across the fork() syscall. fork() works nicely for this purpose, the registers should be the same for both parent and child Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Add include guards to basic_asm.h, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Remove -flto from common CFLAGSSuraj Jitindar Singh1-1/+1
LTO can cause GCC to inline some functions which have attributes set. The act of inlining the functions can lead to GCC forgetting about the attributes which leads to incorrect tests. Notable example being: __attribute__((__target__("no-vsx"))) LTO can also interact strangely with custom assembly functions and cause tests to intermittently fail. Both these cases are hard to detect and require manual inspection of binaries which is unlikely to happen for all tests. Furthermore, LTO optimisations are not necessary for selftests and correctness is paramount and as such it is best to disable LTO. LTO can be enabled on a per test basis. A pseries_le_defconfig kernel on a POWER8 was used to determine that the same subset of selftests pass and fail with and without -flto in the common Makefile. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-02selftests/powerpc: Fix out of bounds access in TM signal testMichael Ellerman1-1/+1
Gcc helpfully points out that we're accessing past the end of the gprs array: tm-signal-msr-resv.c: In function 'signal_usr1': tm-signal-msr-resv.c:43:37: error: array subscript is above array bounds [-Werror=array-bounds] ucp->uc_mcontext.regs->gpr[PT_MSR] |= (7ULL); We haven't noticed previously because -flto was hiding it somehow. The code is confused, PT_MSR isn't a gpr, instead it's in uc_regs->gregs, so fix it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-17selftests/powerpc: Add script to test HMI functionalityDaniel Axtens1-0/+89
HMIs (Hypervisor Management|Maintenance Interrupts) are a class of interrupt on POWER systems. HMI support has traditionally been exceptionally difficult to test, however Skiboot ships a tool that, with the correct magic numbers, will inject them. This, therefore, is a first pass at a script to inject HMIs and monitor Linux's response. It injects an HMI on each core on every chip in turn It then watches dmesg to see if it's acknowledged by Linux. On a Tuletta, I observed that we see 8 (or sometimes 9 or more) events per injection, regardless of SMT setting, so we wait for 8 before progressing. It sits in a new scripts/ directory in selftests/powerpc, because it's not designed to be run as part of the regular make selftests process. In particular, it is quite possibly going to end up garding lots of your CPUs, so it should only be run if you know how to undo that. CC: Mahesh J Salgaonkar <mahesh.salgaonkar@in.ibm.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-17selftests/powerpc: Make context_switch touch FP/altivec/vector by defaultMichael Ellerman1-6/+6
Simply because it touches more code paths that way, and therefore tests more things. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Anton Blanchard <anton@samba.org>
2015-12-17selftests/powerpc: Make context_switch do something with no argsMichael Ellerman2-9/+24
For ease of use make the context_switch test do something useful when called with no arguments. Default to a 30 second run, using threads, doing yield, and use any online cpu. Make it print out what it's doing to avoid confusion. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Anton Blanchard <anton@samba.org>
2015-12-17selftests/powerpc: Import Anton's context_switch2 benchmarkMichael Ellerman3-1/+456
This gets referred to a lot in commit messages, so let's pull it into the selftests. Almost vanilla from: http://ozlabs.org/~anton/junkcode/context_switch2.c Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Anton Blanchard <anton@samba.org>
2015-12-17selftests/powerpc: Move pick_online_cpu() up into utils.cMichael Ellerman5-28/+31
We want to use this in another test, so make it available at the top of the powerpc selftests tree. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Add test to check if VSRs are corruptedRashmica Gupta3-1/+105
When a transaction is aborted, VSR values should rollback to the checkpointed values before the transaction began. VSRs used elsewhere in the kernel during a transaction, or while the transaction is suspended should not affect the checkpointed values. Prior to the bug fix in commit d31626f70b61 ("powerpc: Don't corrupt transactional state when using FP/VMX in kernel") when VMX was requested by the kernel the .vr_state (which held the checkpointed state of VSRs before the transaction) was overwritten with the current state from outside the transation. Thus if the transaction did not complete, the VSR values would be "rolled back" to potentially incorrect values. Signed-off-by: Rashmica Gupta <rashmicy@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Add TM signal with invalid stack testMichael Neuling3-1/+78
Test the kernels signal generation code to ensure it can handle an invalid stack pointer when transactional. Signed-off-by: Michael Neuling <mikey@neuling.org> Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Skip if we don't have TM] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Add TM signal return testMichael Neuling3-1/+76
Test the kernel's signal return code to ensure that it doesn't crash when both the transactional and suspend MSR bits are set in the signal context. Signed-off-by: Michael Neuling <mikey@neuling.org> Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Skip if we don't have TM] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Skip tm-resched-dscr if we don't have TMMichael Ellerman2-2/+5
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Move TM helpers into tm.hMichael Ellerman2-11/+35
Move have_htm_nosc() into a new tm.h, and add a new helper, have_htm() which we'll use in the next patch. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Add have_hwcap2() helperMichael Ellerman3-4/+8
We already do this twice and want to add another so add a helper. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-14selftests/powerpc: Move get_auxv_entry() into utils.cMichael Ellerman5-45/+63
This doesn't really belong in harness.c, it's a helper function. So move it into utils.c. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-12-10powerpc: Fix DSCR inheritance over fork()Anton Blanchard2-16/+0
Two DSCR tests have a hack in them: /* * XXX: Force a context switch out so that DSCR * current value is copied into the thread struct * which is required for the child to inherit the * changed value. */ sleep(1); We should not be working around this in the testcase, it is a kernel bug. Fix it by copying the current DSCR to the child, instead of what we had in the thread struct at last context switch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-11-05Merge tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds33-3/+244
Pull powerpc updates from Michael Ellerman: - Kconfig: remove BE-only platforms from LE kernel build from Boqun Feng - Refresh ps3_defconfig from Geoff Levand - Emit GNU & SysV hashes for the vdso from Michael Ellerman - Define an enum for the bolted SLB indexes from Anshuman Khandual - Use a local to avoid multiple calls to get_slb_shadow() from Michael Ellerman - Add gettimeofday() benchmark from Michael Neuling - Avoid link stack corruption in __get_datapage() from Michael Neuling - Add virt_to_pfn and use this instead of opencoding from Aneesh Kumar K.V - Add ppc64le_defconfig from Michael Ellerman - pseries: extract of_helpers module from Andy Shevchenko - Correct string length in pseries_of_derive_parent() from Nathan Fontenot - Free the MSI bitmap if it was slab allocated from Denis Kirjanov - Shorten irq_chip name for the SIU from Christophe Leroy - Wait 1s for secondaries to enter OPAL during kexec from Samuel Mendoza-Jonas - Fix _ALIGN_* errors due to type difference, from Aneesh Kumar K.V - powerpc/pseries/hvcserver: don't memset pi_buff if it is null from Colin Ian King - Disable hugepd for 64K page size, from Aneesh Kumar K.V - Differentiate between hugetlb and THP during page walk from Aneesh Kumar K.V - Make PCI non-optional for pseries from Michael Ellerman - Individual System V IPC system calls from Sam bobroff - Add selftest of unmuxed IPC calls from Michael Ellerman - discard .exit.data at runtime from Stephen Rothwell - Delete old orphaned PrPMC 280/2800 DTS and boot file, from Paul Gortmaker - Use of_get_next_parent to simplify code from Christophe Jaillet - Paginate some xmon output from Sam bobroff - Add some more elements to the xmon PACA dump from Michael Ellerman - Allow the tm-syscall selftest to build with old headers from Michael Ellerman - Run EBB selftests only on POWER8 from Denis Kirjanov - Drop CONFIG_TUNE_CELL in favour of CONFIG_CELL_CPU from Michael Ellerman - Avoid reference to potentially freed memory in prom.c from Christophe Jaillet - Quieten boot wrapper output with run_cmd from Geoff Levand - EEH fixes and cleanups from Gavin Shan - Fix recursive fenced PHB on Broadcom shiner adapter from Gavin Shan - Use of_get_next_parent() in of_get_ibm_chip_id() from Michael Ellerman - Fix section mismatch warning in msi_bitmap_alloc() from Denis Kirjanov - Fix ps3-lpm white space from Rudhresh Kumar J - Fix ps3-vuart null dereference from Colin King - nvram: Add missing kfree in error path from Christophe Jaillet - nvram: Fix function name in some errors messages, from Christophe Jaillet - drivers/macintosh: adb: fix misleading Kconfig help text from Aaro Koskinen - agp/uninorth: fix a memleak in create_gatt_table from Denis Kirjanov - cxl: Free virtual PHB when removing from Andrew Donnellan - scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target from Michael Ellerman - scripts/kconfig/Makefile: Fix KBUILD_DEFCONFIG check when building with O= from Michael Ellerman - Freescale updates from Scott: Highlights include 64-bit book3e kexec/kdump support, a rework of the qoriq clock driver, device tree changes including qoriq fman nodes, support for a new 85xx board, and some fixes. - MPC5xxx updates from Anatolij: Highlights include a driver for MPC512x LocalPlus Bus FIFO with its device tree binding documentation, mpc512x device tree updates and some minor fixes. * tag 'powerpc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (106 commits) powerpc/msi: Fix section mismatch warning in msi_bitmap_alloc() powerpc/prom: Use of_get_next_parent() in of_get_ibm_chip_id() powerpc/pseries: Correct string length in pseries_of_derive_parent() powerpc/e6500: hw tablewalk: make sure we invalidate and write to the same tlb entry powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s) powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan powerpc/fsl: Add #clock-cells and clockgen label to clockgen nodes powerpc: handle error case in cpm_muram_alloc() powerpc: mpic: use IRQCHIP_SKIP_SET_WAKE instead of redundant mpic_irq_set_wake powerpc/book3e-64: Enable kexec powerpc/book3e-64/kexec: Set "r4 = 0" when entering spinloop powerpc/booke: Only use VIRT_PHYS_OFFSET on booke32 powerpc/book3e-64/kexec: Enable SMP release powerpc/book3e-64/kexec: create an identity TLB mapping powerpc/book3e-64: Don't limit paca to 256 MiB powerpc/book3e/kdump: Enable crash_kexec_wait_realmode powerpc/book3e: support CONFIG_RELOCATABLE powerpc/booke64: Fix args to copy_and_flush powerpc/book3e-64: rename interrupt_end_book3e with __end_interrupts powerpc/e6500: kexec: Handle hardware threads ...
2015-10-19selftests/powerpc: Run EBB tests only on POWER8Denis Kirjanov24-0/+56
EBB (Event Based Branches) are currently only available on POWER8, so we should skip them on other CPUs. I've found that at least one test loops forever on 970MP (cycles_with_freeze_test). Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> [mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Allow the tm-syscall test to build with old headersMichael Ellerman1-2/+12
When building against older kernel headers, currently the tm-syscall test fails to build because PPC_FEATURE2_HTM_NOSC is not defined. Tweak the test so that if PPC_FEATURE2_HTM_NOSC is not defined it still builds, but prints a warning at run time and marks the test as skipped. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Sort the list of SUB_DIRS to buildMichael Ellerman1-1/+11
This list has gotten too long. Split it into individual lines and sort them, so in future we can add new entries more cleanly. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15selftests/powerpc: Add tests of unmuxed IPC callsMichael Ellerman5-1/+122
This is just a simple test which confirms that the individual IPC syscalls are all available. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-13selftests/powerpc: Fix build failure of load_unaligned_zeropad testMichael Ellerman1-0/+9
Commit 7a5692e6e533 ("arch/powerpc: provide zero_bytemask() for big-endian") added a call to __fls() in our word-at-a-time.h. That was fine for the kernel build but missed the fact that we also use word-at-a-time.h in a userspace test. Pulling in the kernel version of __fls() gets messy, so just define our own, it's unlikely to change often. Fixes: 7a5692e6e533 ("arch/powerpc: provide zero_bytemask() for big-endian") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-01powerpc/selftest: Add gettimeofday() benchmarkMichael Neuling4-1/+45
This adds a benchmark directory to the powerpc selftests and adds a gettimeofday() benchmark to it. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-17selftests/powerpc: Install tempfile so the subpage_prot_file test worksMichael Ellerman1-1/+2
We forgot to install the tempfile, so when the selftests are installed and then run the subpage_prot_file test fails. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-19powerpc/tm: Abort syscalls in active transactionsSam bobroff2-3/+4
This patch changes the syscall handler to doom (tabort) active transactions when a syscall is made and return very early without performing the syscall and keeping side effects to a minimum (no CPU accounting or system call tracing is performed). Also included is a new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this behaviour to userspace. Currently, the system call instruction automatically suspends an active transaction which causes side effects to persist when an active transaction fails. This does change the kernel's behaviour, but in a way that was documented as unsupported. It doesn't reduce functionality as syscalls will still be performed after tsuspend; it just requires that the transaction be explicitly suspended. It also provides a consistent interface and makes the behaviour of user code substantially the same across powerpc and platforms that do not support suspended transactions (e.g. x86 and s390). Performance measurements using http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of a normal (non-aborted) system call increases by about 0.25%. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add gitignore file for the new DSCR testsAnshuman Khandual1-0/+7
This patch adds .gitignore for all the newly added DSCR tests. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add thread based stress test for DSCR sysfs interfacesMichael Ellerman2-1/+82
This patch adds a test to update the system wide DSCR value repeatedly and then verifies that any thread on any given CPU on the system must be able to see the same DSCR value whether its is being read through the problem state based SPR or the privilege state based SPR. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for all DSCR sysfs interfacesAnshuman Khandual2-1/+98
This test continuously updates the system wide DSCR default value in the sysfs interface and makes sure that the same is reflected across all the sysfs interfaces for each individual CPUs present on the system. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR inheritence across fork & execAnshuman Khandual2-1/+118
This patch adds a test case to verify that the changed DSCR value inside any process would be inherited to it's child across the fork and exec system call. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR value inheritence across forkAnshuman Khandual2-1/+97
This patch adds a test to verify that the changed DSCR value inside any process would be inherited to it's child process across the fork system call. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for DSCR SPR numbersAnshuman Khandual2-1/+62
This patch adds a test which verifies that the DSCR privilege and problem state SPR read & write accesses while making sure that the results are always the same irrespective of which SPR number is being used. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for explicitly changing DSCR valueAnshuman Khandual2-1/+72
This patch adds a test which modifies the DSCR using mtspr instruction and verifies the change using mfspr instruction. It uses both the privilege state SPR as well as the problem state SPR for the purpose. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-07selftests/powerpc: Add test for system wide DSCR defaultAnshuman Khandual4-1/+267
This patch adds a test case for the system wide DSCR default value, which when changed through it's sysfs interface must be visible to all threads reading DSCR either through the privilege state SPR or the problem state SPR. The DSCR value change should be immediate as well. Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-02selftests/powerpc: Add install support to more powerpc testsMichael Ellerman2-18/+9
These tests were merged in parallel to the install support, update them now to use it. This also adds cross compile support for the VPHN test which was missing it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-01selftests/powerpc: Fix the pmu install ruleMichael Ellerman1-1/+1
My patch to add install support for the powerpc selftests had a typo, leading to the three tests in the pmu directory itself not being installed. Fixes: 6faeeea44b84 ("selftests: Add install support for the powerpc tests") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-30Revert "powerpc/tm: Abort syscalls in active transactions"Michael Ellerman1-1/+1
This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-16Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds21-91/+852
Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-15mm, selftests: test return value of munmap for MAP_HUGETLB memoryDavid Rientjes1-2/+6
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned, otherwise it fails with -EINVAL. All tests currently behave correctly, but it's better to explcitly test the return value for completeness and document the requirement, especially if users copy map_hugetlb.c as a sample implementation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Joern Engel <joern@logfs.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Eric B Munson <emunson@akamai.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-11selftests/powerpc: Add transactional syscall testSam bobroff4-1/+153
Check that a syscall made during an active transaction will fail with the correct failure code and that one made during a suspended transaction will succeed. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-11selftests/powerpc: Move get_auxv_entry() to harness.cSam bobroff4-49/+48
Move get_auxv_entry() from pmu/lib.c up to harness.c in order to make it available to other tests. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-28selftests/powerpc: Add a test of the switch_endian() syscallMichael Ellerman6-1/+214
This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-19selftests: Set CC using CROSS_COMPILE once in lib.mkMichael Ellerman1-2/+1
This avoids repeating the logic in every Makefile. We mimic the top-level Makefile and use $(CROSS_COMPILE)gcc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-19selftests: Add install support for the powerpc testsMichael Ellerman8-82/+73
The bulk of the selftests are actually below the powerpc sub directory. This adds support for installing them, when on a powerpc machine, or if ARCH and CROSS_COMPILE are set appropriately. This is a little more complicated because of the sub directory structure under powerpc, but much of the common logic in lib.mk is still used. The net effect of the patch is still a reduction in code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-18selftests/powerpc: Rename TARGETS in powerpc selftests makefileMichael Ellerman1-6/+6
This patch changes the name of the make variable TARGETS, to prevent it from colliding with a value set by the user on the command line (as they are recommended to do by tools/testing/selftests/README.txt). Without this patch, "make -C tools/testing/selftests TARGETS=powerpc" will fail. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-18selftests/powerpc: Add test for VPHNGreg Kurz7-1/+430
The goal is to verify vphn_unpack_associativity() parses VPHN numbers correctly. We feed it with a variety of input values and compare with expected results. PAPR+ does not say much about VPHN parsing: I came up with a list of tests that check many simple cases and some corner ones. I wouldn't dare to say the list is exhaustive though. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [mpe: Rework harness logic, rename to test-vphn, add -m64] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-03-17selftests/powerpc: Build the copyloops with -maltivecMichael Ellerman1-0/+1
The recent change to remove the vrX defines exposed the fact that we are building the copyloops tests without altivec enabled. It depends on the toolchain as to whether altivec is on by default or not, so it only breaks on some toolchains. But we should always enable it. Fixes: c2ce6f9f3dc0 ("powerpc: Change vrX register defines to vX to match gcc and glibc") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-16powerpc: Change vrX register defines to vX to match gcc and glibcAnton Blanchard1-33/+0
As our various loops (copy, string, crypto etc) get more complicated, we want to share implementations between userspace (eg glibc) and the kernel. We also want to write userspace test harnesses to put in tools/testing/selftest. One gratuitous difference between userspace and the kernel is the VMX register definitions - the kernel uses vrX whereas both gcc and glibc use vX. Change the kernel to match userspace. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Add memcmp testcaseAnton Blanchard6-1/+133
Add a testcase for the new ppc64 memcmp. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.