| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
|
|
8xx is now able to support any range length so range tests can be
enabled.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/081e3b4e3a17a8ec9fdac46b505e3a29ca15f209.1574790198.git.christophe.leroy@c-s.fr
|
|
Userspace isn't allowed to access certain address ranges, make sure we
actually test that to at least some degree.
This would have caught the recent bug where the SLB fault handler was
incorrectly called on an out-of-range access when using the Radix MMU.
It also would have caught the bug we had in get_region_id() where we
were inserting SLB entries for bad addresses.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520102051.12103-1-mpe@ellerman.id.au
|
|
The spectre_v2 test must be built 64-bit, it includes hand-written asm
that is 64-bit only, and segfaults if built 32-bit.
Fixes: c790c3d2b0ec ("selftests/powerpc: Add a test of spectre_v2 mitigations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191120023924.13130-1-mpe@ellerman.id.au
|
|
On older distributions like Sles12SP5 gcc does not recognize
-no-pie option making the powerpc selftests build to fail
Fixes the following:
gcc: error: unrecognized command line option ‘-no-pie’
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191113094219.14946-1-harish@linux.ibm.com
|
|
On the 8xx, signals are generated after executing the instruction. So
no need to manually single-step on 8xx. Also, 8xx __set_dabr()
currently ignores length and hardcodes the length to 8 bytes. So all
unaligned and 512 byte testcase will fail on 8xx. Ignore those
testcases on 8xx.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-8-ravi.bangoria@linux.ibm.com
|
|
So far we used to ignore exception if DAR points outside of user
specified range. But now we are ignoring it only if actual load/store
range does not overlap with user specified range. Include selftests
for the same:
# ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak
...
TESTED: No overlap
TESTED: Partial overlap
TESTED: Partial overlap
TESTED: No overlap
TESTED: Full overlap
success: perf_hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-7-ravi.bangoria@linux.ibm.com
|
|
ptrace-hwbreak.c selftest is logically broken. On powerpc, when
watchpoint is created with ptrace, signals are generated before
executing the instruction and user has to manually singlestep the
instruction with watchpoint disabled, which selftest never does and
thus it keeps on getting the signal at the same instruction. If we fix
it, selftest fails because the logical connection between
tracer(parent) and tracee(child) is also broken. Rewrite the selftest
and add new tests for unaligned access.
With patch:
$ ./tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak
test: ptrace-hwbreak
tags: git_version:powerpc-5.3-4-224-g218b868240c7-dirty
PTRACE_SET_DEBUGREG, WO, len: 1: Ok
PTRACE_SET_DEBUGREG, WO, len: 2: Ok
PTRACE_SET_DEBUGREG, WO, len: 4: Ok
PTRACE_SET_DEBUGREG, WO, len: 8: Ok
PTRACE_SET_DEBUGREG, RO, len: 1: Ok
PTRACE_SET_DEBUGREG, RO, len: 2: Ok
PTRACE_SET_DEBUGREG, RO, len: 4: Ok
PTRACE_SET_DEBUGREG, RO, len: 8: Ok
PTRACE_SET_DEBUGREG, RW, len: 1: Ok
PTRACE_SET_DEBUGREG, RW, len: 2: Ok
PTRACE_SET_DEBUGREG, RW, len: 4: Ok
PTRACE_SET_DEBUGREG, RW, len: 8: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, DAR OUTSIDE, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, DAWR_MAX_LEN, RW, len: 512: Ok
success: ptrace-hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-6-ravi.bangoria@linux.ibm.com
|
|
On systems where TM (Transactional Memory) is disabled the
tm-signal-sigreturn-nt test causes a SIGILL:
test: tm_signal_sigreturn_nt
tags: git_version:7c202575ef63
!! child died by signal 4
failure: tm_signal_sigreturn_nt
We should skip the test if TM is not available.
Fixes: 34642d70ac7e ("selftests/powerpc: Add checks for transactional sigreturn")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104233524.24348-1-mpe@ellerman.id.au
|
|
This test uses the PMU to count branch prediction hits/misses for a
known loop, and compare the result to the reported spectre v2
mitigation.
This gives us a way of sanity checking that the reported mitigation is
actually in effect.
Sample output for some cases, eg:
Power9:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 368 running/enabled 5792777124
PM_BR_MPRED_CCACHE: result 319 running/enabled 5792775546
PM_BR_PRED_PCACHE: result 2147483281 running/enabled 5792773128
PM_BR_MPRED_PCACHE: result 213604201 running/enabled 5792771640
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch serialisation (kernel only)'
PM_BR_PRED_CCACHE: result 895 running/enabled 5780320920
PM_BR_MPRED_CCACHE: result 822 running/enabled 5780312414
PM_BR_PRED_PCACHE: result 2147482754 running/enabled 5780308836
PM_BR_MPRED_PCACHE: result 213639731 running/enabled 5780307912
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 20540186160
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 20540180056
PM_BR_PRED_PCACHE: result 0 running/enabled 20540176090
PM_BR_MPRED_PCACHE: result 0 running/enabled 20540174182
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
Power8:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 3505888142
PM_BR_MPRED_CCACHE: result 9 running/enabled 3505882788
Miss percent 0 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 16931421988
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 16931416478
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
success: spectre_v2
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520105520.22274-1-mpe@ellerman.id.au
|
|
Some of our TM (Transactional Memory) tests, list "r1" (the stack
pointer) as a clobbered register.
GCC >= 9 doesn't accept this, and the build breaks:
ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
31 | asm __volatile__(
| ^~~
ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement
We do have some fairly large inline asm blocks in these tests, and
some of them do change the value of r1. However they should all return
to C with the value in r1 restored, so I think it's legitimate to say
r1 is not clobbered.
As Segher points out, the r1 clobbers may have been added because of
the use of `or 1,1,1`, however that doesn't actually clobber r1.
Segher also points out that some of these tests do clobber LR, because
they call functions, and that is not listed in the clobbers, so add
that where appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
|
|
The defaults for the sigfuz test is to run for 4000 iterations, but
that can take quite a while and the test harness may kill the test.
Reduce the number of iterations to 600, which gives a runtime of
roughly 1 minute on a Power8 system.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191013234643.3430-1-mpe@ellerman.id.au
|
|
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
|
|
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Some minor fixes to make it build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-4-aneesh.kumar@linux.ibm.com
|
|
Add TM selftest to check if FP or VEC register values from one process
can leak into another process when both run on the same CPU.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-3-gromero@linux.vnet.ibm.com
|
|
Appropriate self tests for memcpy_mcsafe
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903214359.23887-2-santosh@fossix.org
|
|
Use the new eeh_dev_check and eeh_dev_break interfaces to test EEH
recovery. Historically this has been done manually using platform specific
EEH error injection facilities (e.g. via RTAS). However, documentation on
how to use these facilities is haphazard at best and non-existent at worst
so it's hard to develop a cross-platform test.
The new debugfs interfaces allow the kernel to handle the platform specific
details so we can write a more generic set of sets. This patch adds the
most basic of recovery tests where:
a) Errors are injected and recovered from sequentially,
b) Errors are not injected into PCI-PCI bridges, such as PCIe switches.
c) Errors are only injected into device function zero.
d) No errors are injected into Virtual Functions.
a), b) and c) are largely due to limitations of Linux's EEH support. EEH
recovery is serialised in the EEH recovery thread which forces a).
Similarly, multi-function PCI devices are almost always grouped into the
same PE so injecting an error on one function exercises the same code
paths. c) is because we currently more or less ignore PCI bridges during
recovery and assume that the recovered topology will be the same as the
original.
d) is due to the limits of the eeh_dev_break interface. With the current
implementation we can't inject an error into a specific VF without
potentially causing additional errors on other VFs. Due to the serialised
recovery process we might end up timing out waiting for another function to
recover before the function of interest is recovered. The platform specific
error injection facilities are finer-grained and allow this capability, but
doing that requires working out how to use those facilities first.
Basicly, it's better than nothing and it's a base to build on.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903101605.2890-15-oohall@gmail.com
|
|
TM test tm-unavailable must take into account aborts due to host aborting
a transactin because of a facility unavailable exception, just like it
already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED).
Reported-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1566341651-19747-1-git-send-email-gromero@linux.vnet.ibm.com
|
|
Currently TM signal context tests for GPR, FPR, VMX, and VSX registers
print wrong register numbers (wrongly starting from register 0 instead
of the first register in the non-volatile subset). Besides it the
output when a mismatch happens is poor giving not much information
about which context and which register mismatches, because it prints
both contexts at the same time and not a comparison between the value
that mismatches and the value expected and, moreover, it stops
printing on the first mismatch, but it's important to know if there
are other mismatches happening beyond the first one.
For instance, this is the current output when a mismatch happens:
test: tm_signal_context_chk_gpr
tags: git_version:v5.2-8249-g02e970fae465-dirty
Failed on 0 GPR 1 or 18446744073709551615
failure: tm_signal_context_chk_gpr
test: tm_signal_context_chk_fpu
tags: git_version:v5.2-8248-g09c289e3ef80
Failed on 0 FP -1 or -1
failure: tm_signal_context_chk_fpu
test: tm_signal_context_chk_vmx
tags: git_version:v5.2-8248-g09c289e3ef80
Failed on 0 vmx 0xfffffffffffffffefffffffdfffffffc vs 0xfffffffffffffffefffffffdfffffffc
failure: tm_signal_context_chk_vmx
test: tm_signal_context_chk_vsx
tags: git_version:v5.2-8248-g09c289e3ef80
Failed on 0 vsx 0xfffffffffefffffffdfffffffcffffff vs 0xfffffffffefffffffdfffffffcffffff
failure: tm_signal_context_chk_vsx
This commit fixes the register numbers printed and enhances the error
output by providing a full list of mismatching registers separated by
the context (non-speculative or speculative context), for example:
test: tm_signal_context_chk_gpr
tags: git_version:v5.2-8249-g02e970fae465-dirty
GPR14 (1st context) == 1 instead of -1 (expected)
GPR15 (1st context) == 2 instead of -2 (expected)
GPR14 (2nd context) == 0 instead of 18446744073709551615 (expected)
GPR15 (2nd context) == 0 instead of 18446744073709551614 (expected)
failure: tm_signal_context_chk_gpr
test: tm_signal_context_chk_fpu
tags: git_version:v5.2-8249-g02e970fae465-dirty
FPR14 (1st context) == -1 instead of 1 (expected)
FPR15 (1st context) == -2 instead of 2 (expected)
failure: tm_signal_context_chk_fpu
test: tm_signal_context_chk_vmx
tags: git_version:v5.2-8249-g02e970fae465-dirty
VMX20 (1st context) == 0xfffffffffffffffefffffffdfffffffc instead of 0x00000001000000020000000300000004 (expected)
VMX21 (1st context) == 0xfffffffbfffffffafffffff9fffffff8 instead of 0x00000005000000060000000700000008 (expected)
failure: tm_signal_context_chk_vmx
test: tm_signal_context_chk_vsx
tags: git_version:v5.2-8249-g02e970fae465-dirty
VSX20 (1st context) == 0xfffffffffefffffffdfffffffcffffff instead of 0x00000001000000020000000300000004 (expected)
VSX21 (1st context) == 0xfbfffffffafffffff9fffffff8ffffff instead of 0x00000005000000060000000700000008 (expected)
failure: tm_signal_context_chk_vsx
Finally, this commit adds comments to the tests in the hope that it
will help people not so familiar with TM understand the tests.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814205211.24840-1-gromero@linux.ibm.com
|
|
Currently some binary files which are generated when tests are compiled
are not ignored by git, so 'git status' catch them.
For copyloops test, fix wrong binary names already in .gitignore. For
ptrace, security, and stringloops tests add missing binary names to the
.gitignore file.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814205638.25322-2-gromero@linux.ibm.com
|
|
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
Jitindar Singh, Thiago Jung Bauermann, YueHaibing"
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
|
|
hcall_vphn() is specific to pseries and will be used in a subsequent
patch. So, move it to a more appropriate place under
arch/powerpc/platforms/pseries. Also merge vphn.h into lppaca.h
and update vphn selftest to use the new files.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
"git diff" says:
\ No newline at end of file
after modifying the file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[mpe: Rebase since addition of another test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The guard macro __PPC_ASM_H in the header ppc_asm.h
doesn't match the #ifndef macro _PPC_ASM_H. The patch
makes them the same.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Merge our fixes branch into next, this brings in a number of commits
that fix bugs we don't want to hit in next, in particular the fix for
CVE-2019-12817.
|
|
Pull powerpc fixes from Michael Ellerman:
"One fix for a bug in our context id handling on 64-bit hash CPUs,
which can lead to unrelated processes being able to read/write to each
other's virtual memory. See the commit for full details.
That is the fix for CVE-2019-12817.
This also adds a kernel selftest for the bug"
* tag 'powerpc-5.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add test of fork with mapping above 512TB
powerpc/mm/64s/hash: Reallocate context ids on fork
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some cases, compiler can allocate the same register for operand 'res'
and 'vecoutptr', resulting in segfault at 'stxvd2x 40,0,%[vecoutptr]'
because base register will contain 1, yielding a false-positive.
This is because output 'res' must be marked as an earlyclobber operand so
it may not overlap an input operand ('vecoutptr').
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This merges a fix for a bug in our context id handling on 64-bit hash
CPUs.
The fix was written against v5.1 to ease backporting to stable
releases. Here we are merging it up to a v5.2-rc2 base, which involves
a bit of manual resolution.
It also adds a test case for the bug.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This tests that when a process with a mapping above 512TB forks we
correctly separate the parent and child address spaces. This exercises
the bug in the context id handling fixed in the previous commit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 100 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a new selftest that raises SIGUSR1 signals and handles it in a
set of different ways, trying to create different scenario for testing
purpose.
This test works raising a signal and calling sigreturn interleaved
with TM operations, as starting, suspending and terminating a
transaction. The test depends on random numbers, and, based on them,
it sets different TM states.
Other than that, the test fills out the user context struct that is
passed to the sigreturn system call with random data, in order to make
sure that the signal handler syscall can handle different and invalid
states properly.
This selftest has command line parameters to control what kind of
tests the user wants to run, as for example, if a transaction should
be started prior to signal being raised, or, after the signal being
raised and before the sigreturn. If no parameter is given, the default
is enabling all options.
This test does not check if the user context is being read and set
properly by the kernel. Its purpose, at this time, is basically
guaranteeing that the kernel does not crash on invalid scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset()
Those wrappers are doing the verification then call respectively
__memcpy() __memmove() and __memset(). The arches are therefore
expected to rename their optimised functions that way.
For files on which KASAN is inhibited, #defines are used to allow
them to directly call optimised versions of the functions without
going through the KASAN wrappers.
See commit 393f203f5fd5 ("x86_64: kasan: add interceptors for
memset/memmove/memcpy functions") for details.
Other string / mem functions do not (yet) have kasan wrappers,
we therefore have to fallback to the generic versions when
KASAN is active, otherwise KASAN checks will be skipped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fixups to keep selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Many files in arch/powerpc/mm are only for book3S64. This patch
creates a subdirectory for them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Update the selftest sym links, shorten new filenames, cleanup some
whitespace and formatting in the new files.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Remove duplicate headers which are included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
All callers of mftb() expect 'unsigned long', and the function itself
only returns lower part of the TB so it really is 'unsigned long'
not 'unsigned long long'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
A new self test that forces MSR[TS] to be set without calling any TM
instruction. This test also tries to cause a page fault at a signal
handler, exactly between MSR[TS] set and tm_recheckpoint(), forcing
thread->texasr to be rewritten with TEXASR[FS] = 0, which will cause a BUG
when tm_recheckpoint() is called.
This test is not deterministic, since it is hard to guarantee that the page
access will cause a page fault. In order to force more page faults at
signal context, the signal handler and the ucontext are being mapped into a
MADV_DONTNEED memory chunks.
Tests have shown that the bug could be exposed with few interactions in a
buggy kernel. This test is configured to loop 5000x, having a good chance
to hit the kernel issue in just one run. This self test takes less than
two seconds to run.
This test uses set/getcontext because the kernel will recheckpoint
zeroed structures, causing the test to segfault, which is undesired because
the test needs to rerun, so, there is a signal handler for SIGSEGV which
will restart the test.
v2: Uses the MADV_DONTNEED memory advice
v3: Fix memcpy and 32-bits compilation
v4: Does not define unused macros
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This is a new test case that creates a signal and starts a suspended
transaction inside the signal handler.
It returns from the signal handler with the CPU at suspended state, but
without setting user context MSR Transaction State (TS) field.
The kernel signal handler code should be able to handle this discrepancy
instead of crashing.
This code could be compiled and used to test 32 and 64-bits signal
handlers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This patch creates a new macro that skips a test and prints a message to
stderr. This is useful to give an idea why the tests is being skipped,
other than just skipping the test blindly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.
This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The selftest I recently added to test branching to an out-of-bounds
NIP doesn't work on 64-bit big endian. It does fail but not in the
right way. That is it SEGVs trying to load from the opd at BAD_NIP,
but it never gets as far as branching to BAD_NIP.
To fix it we need to create an opd which is reachable but which holds
the bad address.
Fixes: b7683fc66eba ("selftests/powerpc: Add a test of wild bctr")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
We are using 'dscr_insn' as a label in inline asm to identify if a
SIGILL was generated by the mtspr instruction at that point. However,
with inline assembly, the compiler is still free to duplicate the asm
statement for optimization purposes, which results in the label being
defined twice with the error:
/tmp/ccerQCql.s:874: Error: symbol `dscr_insn' is already defined
With different compiler versions, we may also see:
/tmp/ccJzLDlN.o:(.toc+0x0): undefined reference to `dscr_insn'
Remove the use of the label in the inline assembly. Instead, just look
for the offending instruction in the signal handler.
Fixes: d2bf793237b3 ("selftests/powerpc: Add test to verify rfi flush across a system call")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Use TEST_GEN_PROGS and don't redefine all, this makes the out-of-tree
build work. We need to move the extra dependencies below the include
of lib.mk, because it adds the $(OUTPUT) prefix if it's defined.
We can also drop the clean rule, lib.mk does it for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
For the out-of-tree build to work we need to tell switch_endian_test
to look for check-reversed.S in $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When running the ebb tests after building on a ppc64le Ubuntu machine:
$ pmu/ebb/reg_access_test: error while loading shared libraries:
R_PPC64_ADDR16_HI reloc at 0x000000013a965130 for symbol `' out of
range
This is because the Ubuntu toolchain builds has PIE enabled by default.
Change it to be always off instead.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
Oliver O'Halloran
Christophe Leroy
Michael Ellerman
Harish
Ravi Bangoria
Desnes A. Nunes do Rosario
Aneesh Kumar K.V
Gustavo Romero
Santosh Sivaraj
Gustavo Romero
Linus Torvalds
Naveen N. Rao
Geert Uytterhoeven
Denis Efremov
Thomas Gleixner
Breno Leitao
Joel Stanley