Age | Commit message (Collapse) | Author | Files | Lines |
|
The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.
Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to
determine host mapping size", 2018-09-11) added a call to
__find_linux_pte() and a dereference of the returned PTE pointer to the
radix page fault path in the common case where the page is normal
system memory. Previously, __find_linux_pte() was only called for
mappings to physical addresses which don't have a page struct (e.g.
memory-mapped I/O) or where the page struct is marked as reserved
memory.
This exposes us to the possibility that the returned PTE pointer
could be NULL, for example in the case of a concurrent THP collapse
operation. Dereferencing the returned NULL pointer causes a host
crash.
To fix this, we check for NULL, and if it is NULL, we retry the
operation by returning to the guest, with the expectation that it
will generate the same page fault again (unless of course it has
been fixed up by another CPU in the meantime).
Fixes: 71d29f43b633 ("KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
The NIC driver should only enable interrupts when napi_complete_done()
returns true. This patch adds the check for ixgbe.
Cc: stable@vger.kernel.org # 4.10+
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The final call to zlib_deflate(Z_FINISH) may require more output
space to be allocated and so needs to re-invoked. Failure to do so in
the current code leads to incomplete zlib streams (albeit intact due to
the use of Z_SYNC_FLUSH) resulting in the occasional short object
capture.
v2: Check against overrunning our pre-allocated page array
v3: Drop Z_SYNC_FLUSH entirely
Testcase: igt/i915-error-capture.js
Fixes: 0a97015d45ee ("drm/i915: Compress GPU objects in error state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003082422.23214-1-chris@chris-wilson.co.uk
(cherry picked from commit 83bc0f5b432f60394466deef16fc753e27371d0b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freeing the subscription object's memory --- while
the subscription object is simultaneously accessed.
Prevent this by adding a mutex to serialise the event subscription and
unsubscription. This also gives a guarantee to the callback ops that the
add op has returned before the del op is called.
This change also results in making the elems field less special:
subscriptions are only added to the event list once they are fully
initialised.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for 4.14 and up
Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
If CONFIG_WW_MUTEX_SELFTEST=y is enabled, booting an image
in an arm64 virtual machine results in the following
traceback if 8 CPUs are enabled:
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
WARNING: CPU: 2 PID: 537 at kernel/locking/mutex.c:1033 __mutex_unlock_slowpath+0x1a8/0x2e0
...
Call trace:
__mutex_unlock_slowpath()
ww_mutex_unlock()
test_cycle_work()
process_one_work()
worker_thread()
kthread()
ret_from_fork()
If requesting b_mutex fails with -EDEADLK, the error variable
is reassigned to the return value from calling ww_mutex_lock
on a_mutex again. If this call fails, a_mutex is not locked.
It is, however, unconditionally unlocked subsequently, causing
the reported warning. Fix the problem by using two error variables.
With this change, the selftest still fails as follows:
cyclic deadlock not resolved, ret[7/8] = -35
However, the traceback is gone.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: d1b42b800e5d0 ("locking/ww_mutex: Add kselftests for resolving ww_mutex cyclic deadlocks")
Link: http://lkml.kernel.org/r/1538516929-9734-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
arch/x86/kernel/cpu/amd.c:925:14: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
if ((c->x86 == 6)) {
~~~~~~~^~~~
arch/x86/kernel/cpu/amd.c:925:14: note: remove extraneous parentheses
around the comparison to silence this warning
if ((c->x86 == 6)) {
~ ^ ~
arch/x86/kernel/cpu/amd.c:925:14: note: use '=' to turn this equality
comparison into an assignment
if ((c->x86 == 6)) {
^~
=
1 warning generated.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181002224511.14929-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/187
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When I fixed the vDSO build to use inline retpolines, I messed up
the Makefile logic and made it unconditional. It should have
depended on CONFIG_RETPOLINE and on the availability of compiler
support. This broke the build on some older compilers.
Reported-by: nikola.ciprich@linuxbox.cz
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Rickard <matt@softrans.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jason.vas.dias@gmail.com
Cc: stable@vger.kernel.org
Fixes: 2e549b2ee0e3 ("x86/vdso: Fix vDSO build if a retpoline is emitted")
Link: http://lkml.kernel.org/r/08a1f29f2c238dd1f493945e702a521f8a5aa3ae.1538540801.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This affects at least versions 25 and 33, so assume all cards are broken
and just renegotiate by default.
Fixes: 10bc6a6042c9 ("r8169: fix autoneg issue on resume with RTL8168E")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes: 2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The incoming skb needs to be reallocated in case the headroom
is not sufficient to adjust the ethernet header. This allocation
needs to be atomic otherwise it results in this splat
[<600601bb>] ___might_sleep+0x185/0x1a3
[<603f6314>] ? _raw_spin_unlock_irqrestore+0x0/0x27
[<60069bb0>] ? __wake_up_common_lock+0x95/0xd1
[<600602b0>] __might_sleep+0xd7/0xe2
[<60065598>] ? enqueue_task_fair+0x112/0x209
[<600eea13>] __kmalloc_track_caller+0x5d/0x124
[<600ee9b6>] ? __kmalloc_track_caller+0x0/0x124
[<602696d5>] __kmalloc_reserve.isra.34+0x30/0x7e
[<603f629b>] ? _raw_spin_lock_irqsave+0x0/0x3d
[<6026b744>] pskb_expand_head+0xbf/0x310
[<6025ca6a>] rmnet_rx_handler+0x7e/0x16b
[<6025c9ec>] ? rmnet_rx_handler+0x0/0x16b
[<6027ad0c>] __netif_receive_skb_core+0x301/0x96f
[<60033c17>] ? set_signals+0x0/0x40
[<6027bbcb>] __netif_receive_skb+0x24/0x8e
Fixes: 74692caf1b0b ("net: qualcomm: rmnet: Process packets over ethernet")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The incoming skb needs to be reallocated in case the headroom
is not sufficient to add the MAP header. This allocation needs to
be atomic otherwise it results in the following splat
[32805.801456] BUG: sleeping function called from invalid context
[32805.841141] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[32805.904773] task: ffffffd7c5f62280 task.stack: ffffff80464a8000
[32805.910851] pc : ___might_sleep+0x180/0x188
[32805.915143] lr : ___might_sleep+0x180/0x188
[32806.131520] Call trace:
[32806.134041] ___might_sleep+0x180/0x188
[32806.137980] __might_sleep+0x50/0x84
[32806.141653] __kmalloc_track_caller+0x80/0x3bc
[32806.146215] __kmalloc_reserve+0x3c/0x88
[32806.150241] pskb_expand_head+0x74/0x288
[32806.154269] rmnet_egress_handler+0xb0/0x1d8
[32806.162239] rmnet_vnd_start_xmit+0xc8/0x13c
[32806.166627] dev_hard_start_xmit+0x148/0x280
[32806.181181] sch_direct_xmit+0xa4/0x198
[32806.185125] __qdisc_run+0x1f8/0x310
[32806.188803] net_tx_action+0x23c/0x26c
[32806.192655] __do_softirq+0x220/0x408
[32806.196420] do_softirq+0x4c/0x70
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RMNET RX handler was processing invalid packets that were
originally sent on the real device and were looped back via
dev_loopback_xmit(). This was detected using syzkaller.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AON_PM_L2 is normally used to trigger and identify the source of a
wake-up event. Since the RX_SYS clock is no longer turned off, we also
have an interrupt being sent to the SYSTEMPORT INTRL_2_0 controller, and
that interrupt remains active up until the magic packet detector is
disabled which happens much later during the driver resumption.
The race happens if we have a CPU that is entering the SYSTEMPORT
INTRL2_0 handler during resume, and another CPU has managed to clear the
wake-up interrupt during bcm_sysport_resume_from_wol(). In that case, we
have the first CPU stuck in the interrupt handler with an interrupt
cause that has been cleared under its feet, and so we keep returning
IRQ_NONE and we never make any progress.
This was not a problem before because we would always turn off the
RX_SYS clock during WoL, so the SYSTEMPORT INTRL2_0 would also be turned
off as well, thus not latching the interrupt.
The fix is to make sure we do not enable either the MPD or
BRCM_TAG_MATCH interrupts since those are redundant with what the
AON_PM_L2 interrupt controller already processes and they would cause
such a race to occur.
Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER")
Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes problem (discovered by Aurelien) introduced by recent commit:
commit b24df3e30cbf48255db866720fb71f14bf9d2f39
("cifs: update receive_encrypted_standard to handle compounded responses")
which broke the ability to respond to some lease breaks
(lease breaks being ignored is a problem since can block
server response for duration of the lease break timeout).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
For compounded PDUs we whould only wake the waiting thread for the
very last PDU of the compound.
We do this so that we are guaranteed that the demultiplex_thread will
not process or access any of those MIDs any more once the send/recv
thread starts processing.
Else there is a race where at the end of the send/recv processing we
will try to delete all the mids of the compound. If the multiplex
thread still has other mids to process at this point for this compound
this can lead to an oops.
Needed to fix recent commit:
commit 730928c8f4be88e9d6a027a16b1e8fa9c59fc077
("cifs: update smb2_queryfs() to use compounding")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
cifs_delete_mid() is called once we are finished handling a mid and we
expect no more work done on this mid.
Needed to fix recent commit:
commit 730928c8f4be88e9d6a027a16b1e8fa9c59fc077
("cifs: update smb2_queryfs() to use compounding")
Add a warning if someone tries to dequeue a mid that has already been
flagged to be deleted.
Also change list_del() to list_del_init() so that if we have similar bugs
resurface in the future we will not oops.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
When mounting a Windows share that is the root of a drive (eg. C$)
the server does not return . and .. directory entries. This results in
the smb2 code path erroneously skipping the 2 first entries.
Pseudo-code of the readdir() code path:
cifs_readdir(struct file, struct dir_context)
initiate_cifs_search <-- if no reponse cached yet
server->ops->query_dir_first
dir_emit_dots
dir_emit <-- adds "." and ".." if we're at pos=0
find_cifs_entry
initiate_cifs_search <-- if pos < start of current response
(restart search)
server->ops->query_dir_next <-- if pos > end of current response
(fetch next search res)
for(...) <-- loops over cur response entries
starting at pos
cifs_filldir <-- skip . and .., emit entry
cifs_fill_dirent
dir_emit
pos++
A) dir_emit_dots() always adds . & ..
and sets the current dir pos to 2 (0 and 1 are done).
Therefore we always want the index_to_find to be 2 regardless of if
the response has . and ..
B) smb1 code initializes index_of_last_entry with a +2 offset
in cifssmb.c CIFSFindFirst():
psrch_inf->index_of_last_entry = 2 /* skip . and .. */ +
psrch_inf->entries_in_buffer;
Later in find_cifs_entry() we want to find the next dir entry at pos=2
as a result of (A)
first_entry_in_buffer = cfile->srch_inf.index_of_last_entry -
cfile->srch_inf.entries_in_buffer;
This var is the dir pos that the first entry in the buffer will
have therefore it must be 2 in the first call.
If we don't offset index_of_last_entry by 2 (like in (B)),
first_entry_in_buffer=0 but we were instructed to get pos=2 so this
code in find_cifs_entry() skips the 2 first which is ok for non-root
shares, as it skips . and .. from the response but is not ok for root
shares where the 2 first are actual files
pos_in_buf = index_to_find - first_entry_in_buffer;
// pos_in_buf=2
// we skip 2 first response entries :(
for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) {
/* go entry by entry figuring out which is first */
cur_ent = nxt_dir_entry(cur_ent, end_of_smb,
cfile->srch_inf.info_level);
}
C) cifs_filldir() skips . and .. so we can safely ignore them for now.
Sample program:
int main(int argc, char **argv)
{
const char *path = argc >= 2 ? argv[1] : ".";
DIR *dh;
struct dirent *de;
printf("listing path <%s>\n", path);
dh = opendir(path);
if (!dh) {
printf("opendir error %d\n", errno);
return 1;
}
while (1) {
de = readdir(dh);
if (!de) {
if (errno) {
printf("readdir error %d\n", errno);
return 1;
}
printf("end of listing\n");
break;
}
printf("off=%lu <%s>\n", de->d_off, de->d_name);
}
return 0;
}
Before the fix with SMB1 on root shares:
<.> off=1
<..> off=2
<$Recycle.Bin> off=3
<bootmgr> off=4
and on non-root shares:
<.> off=1
<..> off=4 <-- after adding .., the offsets jumps to +2 because
<2536> off=5 we skipped . and .. from response buffer (C)
<411> off=6 but still incremented pos
<file> off=7
<fsx> off=8
Therefore the fix for smb2 is to mimic smb1 behaviour and offset the
index_of_last_entry by 2.
Test results comparing smb1 and smb2 before/after the fix on root
share, non-root shares and on large directories (ie. multi-response
dir listing):
PRE FIX
=======
pre-1-root VS pre-2-root:
ERR pre-2-root is missing [bootmgr, $Recycle.Bin]
pre-1-nonroot VS pre-2-nonroot:
OK~ same files, same order, different offsets
pre-1-nonroot-large VS pre-2-nonroot-large:
OK~ same files, same order, different offsets
POST FIX
========
post-1-root VS post-2-root:
OK same files, same order, same offsets
post-1-nonroot VS post-2-nonroot:
OK same files, same order, same offsets
post-1-nonroot-large VS post-2-nonroot-large:
OK same files, same order, same offsets
REGRESSION?
===========
pre-1-root VS post-1-root:
OK same files, same order, same offsets
pre-1-nonroot VS post-1-nonroot:
OK same files, same order, same offsets
BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Paulo Alcantara <palcantara@suse.deR>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.
Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.
A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.
Tested:
lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument
lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap
real 0m0.180s
user 0m0.000s
sys 0m0.107s
Fixes: 76ff5cc91935 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RX queue config for bonding master could be different from its slave
device(s). With the commit 6a9e461f6fe4 ("bonding: pass link-local
packets to bonding master also."), the packet is reinjected into stack
with skb->dev as bonding master. This potentially triggers the
message:
"bondX received packet on queue Y, but number of RX queues is Z"
whenever the queue that packet is received on is higher than the
numrxqueues on bonding master (Y > Z).
Fixes: 6a9e461f6fe4 ("bonding: pass link-local packets to bonding master also.")
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.
Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.
Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().
Fixes: 1ad98e9d1bdf ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9.
This broke earlycon on all Renesas ARM platforms using a SCIF port for the
serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value
of port->regshift.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 7acece71a517cad83a0842a94d94c13f271b680c.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98.
While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
fixes runtime PM handling when using kgdb, it introduces a traceback for
everyone else.
BUG: sleeping function called from invalid context at
/mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034
in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0
7 locks held by swapper/0/1:
#0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b
#1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b
#2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb
#3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0
#4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0
#5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217
#6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f
irq event stamp: 735222
__down_trylock_console_sem+0x4a/0x84
console_unlock+0x338/0x60f
__do_softirq+0x4a4/0x50d
irq_exit+0x64/0xe2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6
Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017
Call Trace:
dump_stack+0x7d/0xbd
___might_sleep+0x238/0x259
__pm_runtime_resume+0x4e/0xa4
? serial8250_rpm_get+0x2e/0x44
serial8250_console_write+0x44/0x301
? lock_acquire+0x1b8/0x1fa
console_unlock+0x577/0x60f
vprintk_emit+0x1f0/0x217
printk+0x52/0x6e
register_console+0x43b/0x524
uart_add_one_port+0x672/0x8b0
? set_io_from_upio+0x150/0x162
serial8250_register_8250_port+0x825/0x8bb
dw8250_probe+0x80c/0x8b0
? dw8250_serial_inq+0x8e/0x8e
? dw8250_check_lcr+0x108/0x108
? dw8250_runtime_resume+0x5b/0x5b
? dw8250_serial_outq+0xa1/0xa1
? dw8250_remove+0x115/0x115
platform_drv_probe+0x76/0xc5
really_probe+0x1f1/0x3ee
? driver_allows_async_probing+0x5d/0x5d
driver_probe_device+0xd6/0x112
? driver_allows_async_probing+0x5d/0x5d
bus_for_each_drv+0xbe/0xe5
__device_attach+0xdd/0x15b
bus_probe_device+0x5a/0x10b
device_add+0x501/0x894
? _raw_write_unlock+0x27/0x3a
platform_device_add+0x224/0x2b7
mfd_add_device+0x718/0x75b
? __kmalloc+0x144/0x16a
? mfd_add_devices+0x38/0xdb
mfd_add_devices+0x9b/0xdb
intel_lpss_probe+0x7d4/0x8ee
intel_lpss_pci_probe+0xac/0xd4
pci_device_probe+0x101/0x18e
...
Revert the offending patch until a more comprehensive solution
is available.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.
This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
|
|
The recent rework of the TSC calibration code introduced a regression on UV
systems as it added a call to tsc_early_init() which initializes the TSC
ADJUST values before acpi_boot_table_init(). In the case of UV systems,
that is a necessary step that calls uv_system_init(). This informs
tsc_sanitize_first_cpu() that the kernel runs on a platform with async TSC
resets as documented in commit 341102c3ef29 ("x86/tsc: Add option that TSC
on Socket 0 being non-zero is valid")
Fix it by skipping the early tsc initialization on UV systems and let TSC
init tests take place later in tsc_init().
Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once")
Suggested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Xiaoming Gao <gxm.linux.kernel@gmail.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Link: https://lkml.kernel.org/r/20181002180144.923579706@stormcage.americas.sgi.com
|
|
Introduce is_early_uv_system() which uses efi.uv_systab to decide early
in the boot process whether the kernel runs on a UV system.
This is needed to skip other early setup/init code that might break
the UV platform if done too early such as before necessary ACPI tables
parsing takes place.
Suggested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Xiaoming Gao <gxm.linux.kernel@gmail.com>
Cc: Rajvi Jingar <rajvi.jingar@intel.com>
Link: https://lkml.kernel.org/r/20181002180144.801700401@stormcage.americas.sgi.com
|
|
When FW floods the driver with control messages try to exit the cmsg
processing loop every now and then to avoid soft lockups. Cmsg
processing is generally very lightweight so 512 seems like a reasonable
budget, which should not be exceeded under normal conditions.
Fixes: 77ece8d5f196 ("nfp: add control vNIC datapath")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") regression with the `declance' driver, which caused
the adapter identification message to be split between two lines, e.g.:
declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA
, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.
Address that properly, by printing identification with a single call,
making the messages now look like:
declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During certain heavy network loads TX could time out
with TX ring dump.
TX is sometimes never restarted after reaching
"tx_stop_threshold" because function "fec_enet_tx_queue"
only tests the first queue.
In addition the TX timeout callback function failed to
recover because it also operated only on the first queue.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If IOMMU is enabled and Thunderbolt driver is built into the kernel
image, it will be probed before IOMMUs are attached to the PCI bus.
Because of this DMA mappings the driver does will not go through IOMMU
and start failing right after IOMMUs are enabled.
For this reason move the Thunderbolt driver initialization happen at
rootfs level.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there is a long chain of devices connected when the driver is loaded
ICM sends device connected event for each and those are put to tb->wq
for later processing. Now if the driver gets unloaded in the middle, so
that the work queue is not yet empty it gets flushed by tb_domain_stop().
However, by that time the root switch is already removed so the driver
crashes when it tries to dereference it in ICM event handling callbacks.
Fix this by checking whether the root switch is already removed. If it
is we know that the domain is stopped and we should merely skip handling
the event.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 51c3c62b58b3 ("powerpc: Avoid code patching freed init
sections") accesses 'init_mem_is_free' flag too early, before the
kernel is relocated. This provokes early boot failure (before the
console is active).
As it is not necessary to do this verification that early, this
patch moves the test into patch_instruction() instead of
__patch_instruction().
This modification also has the advantage of avoiding unnecessary
remappings.
Fixes: 51c3c62b58b3 ("powerpc: Avoid code patching freed init sections")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Explicitly forbid creating cgroup local storage maps with zero value
size, as it makes no sense and might even cause a panic.
Reported-by: syzbot+18628320d3b14a5c459c@syzkaller.appspotmail.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Sergey Suloev reported a crash happening in drm_client_dev_hotplug()
when fbdev had failed to register.
[ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory
[ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.304600] [drm] Driver supports precise vblank timestamp query.
[ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration
[ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a
[ 10.441620] [00330a656369768a] address between user and kernel address ranges
[ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6
[ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3
[ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper]
[ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc)
[ 10.603590] Call trace:
[ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm]
[ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper]
[ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper]
[ 10.623616] process_one_work+0x1c8/0x318
[ 10.627695] worker_thread+0x48/0x428
[ 10.631420] kthread+0xf8/0x128
[ 10.634615] ret_from_fork+0x10/0x18
[ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21)
[ 10.644456] ---[ end trace c75b4a4b0e141908 ]---
The reason for this is that drm_fbdev_cma_init() removes the drm_client
when fbdev registration fails, but it doesn't remove the client from the
drm_device client list. So the client list now has a pointer that points
into the unknown and we have a 'use after free' situation.
Split drm_client_new() into drm_client_init() and drm_client_add() to fix
removal in the error path.
Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation")
Reported-by: Sergey Suloev <ssuloev@orpaltech.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
|
|
Automatic NUMA Balancing uses a multi-stage pass to decide whether a page
should migrate to a local node. This filter avoids excessive ping-ponging
if a page is shared or used by threads that migrate cross-node frequently.
Threads inherit both page tables and the preferred node ID from the
parent. This means that threads can trigger hinting faults earlier than
a new task which delays scanning for a number of seconds. As it can be
load balanced very early in its lifetime there can be an unnecessary delay
before it starts migrating thread-local data. This patch migrates private
pages faster early in the lifetime of a thread using the sequence counter
as an identifier of new tasks.
With this patch applied, STREAM performance is the same as 4.17 even though
processes are not spread cross-node prematurely. Other workloads showed
a mix of minor gains and losses. This is somewhat expected most workloads
are not very sensitive to the starting conditions of a process.
4.19.0-rc5 4.19.0-rc5 4.17.0
numab-v1r1 fastmigrate-v1r1 vanilla
MB/sec copy 43298.52 ( 0.00%) 47335.46 ( 9.32%) 47219.24 ( 9.06%)
MB/sec scale 30115.06 ( 0.00%) 32568.12 ( 8.15%) 32527.56 ( 8.01%)
MB/sec add 32825.12 ( 0.00%) 36078.94 ( 9.91%) 35928.02 ( 9.45%)
MB/sec triad 32549.52 ( 0.00%) 35935.94 ( 10.40%) 35969.88 ( 10.51%)
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-3-mgorman@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rate limiting of page migrations due to automatic NUMA balancing was
introduced to mitigate the worst-case scenario of migrating at high
frequency due to false sharing or slowly ping-ponging between nodes.
Since then, a lot of effort was spent on correctly identifying these
pages and avoiding unnecessary migrations and the safety net may no longer
be required.
Jirka Hladky reported a regression in 4.17 due to a scheduler patch that
avoids spreading STREAM tasks wide prematurely. However, once the task
was properly placed, it delayed migrating the memory due to rate limiting.
Increasing the limit fixed the problem for him.
Currently, the limit is hard-coded and does not account for the real
capabilities of the hardware. Even if an estimate was attempted, it would
not properly account for the number of memory controllers and it could
not account for the amount of bandwidth used for normal accesses. Rather
than fudging, this patch simply eliminates the rate limiting.
However, Jirka reports that a STREAM configuration using multiple
processes achieved similar performance to 4.16. In local tests, this patch
improved performance of STREAM relative to the baseline but it is somewhat
machine-dependent. Most workloads show little or not performance difference
implying that there is not a heavily reliance on the throttling mechanism
and it is safe to remove.
STREAM on 2-socket machine
4.19.0-rc5 4.19.0-rc5
numab-v1r1 noratelimit-v1r1
MB/sec copy 43298.52 ( 0.00%) 44673.38 ( 3.18%)
MB/sec scale 30115.06 ( 0.00%) 31293.06 ( 3.91%)
MB/sec add 32825.12 ( 0.00%) 34883.62 ( 6.27%)
MB/sec triad 32549.52 ( 0.00%) 34906.60 ( 7.24%
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-2-mgorman@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since 890658b7ab48 ("locking/mutex: Kill arch specific code"), there
are no mutex header files under arch/, so we can remove the redundant
entry from MAINTAINERS.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Jason Low <jason.low2@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001142856.GC9716@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
fd_install() moves the reference given to it into the file descriptor table
of the current process. If the current process is multithreaded, then
immediately after fd_install(), another thread can close() the file
descriptor and cause the file's resources to be cleaned up.
Since the reference to "lessee" is held by the file, we must not access
"lessee" after the fd_install() call.
As far as I can tell, to reach this codepath, the caller must have an open
file descriptor to a DRI device in master mode. I'm not sure what the
requirements for that are.
Signed-off-by: Jann Horn <jannh@google.com>
Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001153117.216923-1-jannh@google.com
|
|
If NUMA improvement from the task migration is going to be very
minimal, then avoid task migration.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 198512 205910 3.72673
1 313559 318491 1.57291
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
8 74761.9 74935.9 0.232739
1 214874 226796 5.54837
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 180536 189780 5.12031
1 210281 205695 -2.18089
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 56511.4 60370 6.828
1 104899 108100 3.05151
1/7 cases is regressing, if we look at events migrate_pages seem
to vary the most especially in the regressing case. Also some
amount of variance is expected between different runs of
Specjbb2005.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,818,546 13,801,554
migrations 1,149,960 1,151,541
faults 385,583 433,246
cache-misses 55,259,546,768 55,168,691,835
sched:sched_move_numa 2,257 2,551
sched:sched_stick_numa 9 24
sched:sched_swap_numa 512 904
migrate:mm_migrate_pages 2,225 1,571
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 72692 113682
numa_hint_faults_local 62270 102163
numa_hit 238762 240181
numa_huge_pte_updates 48 36
numa_interleave 75 64
numa_local 238676 240103
numa_other 86 78
numa_pages_migrated 2225 1564
numa_pte_updates 98557 134080
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,173,490 3,079,150
migrations 36,966 31,455
faults 108,776 99,081
cache-misses 12,200,075,320 11,588,126,740
sched:sched_move_numa 1,264 1
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 899 36
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 21109 430
numa_hint_faults_local 17120 77
numa_hit 72934 71277
numa_huge_pte_updates 42 0
numa_interleave 33 22
numa_local 72866 71218
numa_other 68 59
numa_pages_migrated 915 23
numa_pte_updates 42326 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,312,022 8,707,565
migrations 231,705 171,342
faults 310,242 310,820
cache-misses 402,324,573 136,115,400
sched:sched_move_numa 193 215
sched:sched_stick_numa 0 6
sched:sched_swap_numa 3 24
migrate:mm_migrate_pages 93 162
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11838 8985
numa_hint_faults_local 11216 8154
numa_hit 90689 93819
numa_huge_pte_updates 0 0
numa_interleave 1579 882
numa_local 89634 93496
numa_other 1055 323
numa_pages_migrated 92 169
numa_pte_updates 12109 9217
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,170,481 2,152,072
migrations 10,126 10,704
faults 160,962 164,376
cache-misses 10,834,845 3,818,437
sched:sched_move_numa 10 16
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 7
migrate:mm_migrate_pages 2 199
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 403 2248
numa_hint_faults_local 358 1666
numa_hit 25898 25704
numa_huge_pte_updates 0 0
numa_interleave 207 200
numa_local 25860 25679
numa_other 38 25
numa_pages_migrated 2 197
numa_pte_updates 400 2234
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 110,339,633 93,330,595
migrations 4,139,812 4,122,061
faults 863,622 865,979
cache-misses 231,838,045,660 225,395,083,479
sched:sched_move_numa 2,196 2,372
sched:sched_stick_numa 33 24
sched:sched_swap_numa 544 769
migrate:mm_migrate_pages 2,469 1,677
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 85748 91638
numa_hint_faults_local 66831 78096
numa_hit 242213 242225
numa_huge_pte_updates 0 0
numa_interleave 0 2
numa_local 242211 242219
numa_other 2 6
numa_pages_migrated 2376 1515
numa_pte_updates 86233 92274
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 59,331,057 51,487,271
migrations 552,019 537,170
faults 266,586 256,921
cache-misses 73,796,312,990 70,073,831,187
sched:sched_move_numa 981 576
sched:sched_stick_numa 54 24
sched:sched_swap_numa 286 327
migrate:mm_migrate_pages 713 726
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 14807 12000
numa_hint_faults_local 5738 5024
numa_hit 36230 36470
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36228 36465
numa_other 2 5
numa_pages_migrated 703 726
numa_pte_updates 14742 11930
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-7-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since this spinlock will only serialize the migrate rate limiting,
convert the spin_lock() to a spin_trylock(). If another thread is updating, this
task can move on.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 205332 198512 -3.32145
1 319785 313559 -1.94693
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
8 74912 74761.9 -0.200368
1 206585 214874 4.01239
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 189162 180536 -4.56011
1 213760 210281 -1.62753
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 58736.8 56511.4 -3.78877
1 105419 104899 -0.49327
Avoiding stretching of window intervals may be the reason for the
regression. Also code now uses READ_ONCE/WRITE_ONCE. That may
also be hurting performance to some extent.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 14,285,708 13,818,546
migrations 1,180,621 1,149,960
faults 339,114 385,583
cache-misses 55,205,631,894 55,259,546,768
sched:sched_move_numa 843 2,257
sched:sched_stick_numa 6 9
sched:sched_swap_numa 219 512
migrate:mm_migrate_pages 365 2,225
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 26907 72692
numa_hint_faults_local 24279 62270
numa_hit 239771 238762
numa_huge_pte_updates 0 48
numa_interleave 68 75
numa_local 239688 238676
numa_other 83 86
numa_pages_migrated 363 2225
numa_pte_updates 27415 98557
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,202,779 3,173,490
migrations 37,186 36,966
faults 106,076 108,776
cache-misses 12,024,873,744 12,200,075,320
sched:sched_move_numa 931 1,264
sched:sched_stick_numa 0 0
sched:sched_swap_numa 1 0
migrate:mm_migrate_pages 637 899
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 17409 21109
numa_hint_faults_local 14367 17120
numa_hit 73953 72934
numa_huge_pte_updates 20 42
numa_interleave 25 33
numa_local 73892 72866
numa_other 61 68
numa_pages_migrated 668 915
numa_pte_updates 27276 42326
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,474,013 8,312,022
migrations 254,934 231,705
faults 320,506 310,242
cache-misses 110,580,458 402,324,573
sched:sched_move_numa 725 193
sched:sched_stick_numa 0 0
sched:sched_swap_numa 7 3
migrate:mm_migrate_pages 145 93
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 22797 11838
numa_hint_faults_local 21539 11216
numa_hit 89308 90689
numa_huge_pte_updates 0 0
numa_interleave 865 1579
numa_local 88955 89634
numa_other 353 1055
numa_pages_migrated 149 92
numa_pte_updates 22930 12109
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,195,628 2,170,481
migrations 11,179 10,126
faults 149,656 160,962
cache-misses 8,117,515 10,834,845
sched:sched_move_numa 49 10
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 5 2
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 3577 403
numa_hint_faults_local 3476 358
numa_hit 26142 25898
numa_huge_pte_updates 0 0
numa_interleave 358 207
numa_local 26042 25860
numa_other 100 38
numa_pages_migrated 5 2
numa_pte_updates 3587 400
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 100,602,296 110,339,633
migrations 4,135,630 4,139,812
faults 789,256 863,622
cache-misses 226,160,621,058 231,838,045,660
sched:sched_move_numa 1,366 2,196
sched:sched_stick_numa 16 33
sched:sched_swap_numa 374 544
migrate:mm_migrate_pages 1,350 2,469
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 47857 85748
numa_hint_faults_local 39768 66831
numa_hit 240165 242213
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 240165 242211
numa_other 0 2
numa_pages_migrated 1224 2376
numa_pte_updates 48354 86233
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 58,515,496 59,331,057
migrations 564,845 552,019
faults 245,807 266,586
cache-misses 73,603,757,976 73,796,312,990
sched:sched_move_numa 996 981
sched:sched_stick_numa 10 54
sched:sched_swap_numa 193 286
migrate:mm_migrate_pages 646 713
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 13422 14807
numa_hint_faults_local 5619 5738
numa_hit 36118 36230
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36116 36228
numa_other 2 2
numa_pages_migrated 616 703
numa_pte_updates 13374 14742
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-6-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
migrate_task_rq_fair() resets the scan rate for NUMA balancing on every
cross-node migration. In the event of excessive load balancing due to
saturation, this may result in the scan rate being pegged at maximum and
further overloading the machine.
This patch only resets the scan if NUMA balancing is active, a preferred
node has been selected and the task is being migrated from the preferred
node as these are the most harmful. For example, a migration to the preferred
node does not justify a faster scan rate. Similarly, a migration between two
nodes that are not preferred is probably bouncing due to over-saturation of
the machine. In that case, scanning faster and trapping more NUMA faults
will further overload the machine.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 203370 205332 0.964744
1 328431 319785 -2.63252
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 206070 206585 0.249915
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188386 189162 0.41192
1 201566 213760 6.04963
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 59157.4 58736.8 -0.710985
1 105495 105419 -0.0720413
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,825,492 14,285,708
migrations 1,152,509 1,180,621
faults 371,948 339,114
cache-misses 55,654,206,041 55,205,631,894
sched:sched_move_numa 1,856 843
sched:sched_stick_numa 4 6
sched:sched_swap_numa 428 219
migrate:mm_migrate_pages 898 365
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 57146 26907
numa_hint_faults_local 51612 24279
numa_hit 238164 239771
numa_huge_pte_updates 16 0
numa_interleave 63 68
numa_local 238085 239688
numa_other 79 83
numa_pages_migrated 883 363
numa_pte_updates 67540 27415
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,288,525 3,202,779
migrations 38,652 37,186
faults 111,678 106,076
cache-misses 12,111,197,376 12,024,873,744
sched:sched_move_numa 900 931
sched:sched_stick_numa 0 0
sched:sched_swap_numa 5 1
migrate:mm_migrate_pages 714 637
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 18572 17409
numa_hint_faults_local 14850 14367
numa_hit 73197 73953
numa_huge_pte_updates 11 20
numa_interleave 25 25
numa_local 73138 73892
numa_other 59 61
numa_pages_migrated 712 668
numa_pte_updates 24021 27276
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,451,543 8,474,013
migrations 202,804 254,934
faults 310,024 320,506
cache-misses 253,522,507 110,580,458
sched:sched_move_numa 213 725
sched:sched_stick_numa 0 0
sched:sched_swap_numa 2 7
migrate:mm_migrate_pages 88 145
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11830 22797
numa_hint_faults_local 11301 21539
numa_hit 90038 89308
numa_huge_pte_updates 0 0
numa_interleave 855 865
numa_local 89796 88955
numa_other 242 353
numa_pages_migrated 88 149
numa_pte_updates 12039 22930
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,049,153 2,195,628
migrations 11,405 11,179
faults 162,309 149,656
cache-misses 7,203,343 8,117,515
sched:sched_move_numa 22 49
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 1 5
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 1693 3577
numa_hint_faults_local 1669 3476
numa_hit 25177 26142
numa_huge_pte_updates 0 0
numa_interleave 194 358
numa_local 24993 26042
numa_other 184 100
numa_pages_migrated 1 5
numa_pte_updates 1577 3587
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 94,515,937 100,602,296
migrations 4,203,554 4,135,630
faults 832,697 789,256
cache-misses 226,248,698,331 226,160,621,058
sched:sched_move_numa 1,730 1,366
sched:sched_stick_numa 14 16
sched:sched_swap_numa 432 374
migrate:mm_migrate_pages 1,398 1,350
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 80079 47857
numa_hint_faults_local 68620 39768
numa_hit 241187 240165
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 241186 240165
numa_other 1 0
numa_pages_migrated 1347 1224
numa_pte_updates 80729 48354
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 63,704,961 58,515,496
migrations 573,404 564,845
faults 230,878 245,807
cache-misses 76,568,222,781 73,603,757,976
sched:sched_move_numa 509 996
sched:sched_stick_numa 31 10
sched:sched_swap_numa 182 193
migrate:mm_migrate_pages 541 646
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 8501 13422
numa_hint_faults_local 2960 5619
numa_hit 35526 36118
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 35526 36116
numa_other 0 2
numa_pages_migrated 539 616
numa_pte_updates 8433 13374
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-5-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently task scan rate is reset when NUMA balancer migrates the task
to a different node. If NUMA balancer initiates a swap, reset is only
applicable to the task that initiates the swap. Similarly no scan rate
reset is done if the task is migrated across nodes by traditional load
balancer.
Instead move the scan reset to the migrate_task_rq. This ensures the
task moved out of its preferred node, either gets back to its preferred
node quickly or finds a new preferred node. Doing so, would be fair to
all tasks migrating across nodes.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 200668 203370 1.3465
1 321791 328431 2.06345
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 204848 206070 0.59654
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188098 188386 0.153112
1 200351 201566 0.606436
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 58145.9 59157.4 1.73959
1 103798 105495 1.63491
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,912,183 13,825,492
migrations 1,155,931 1,152,509
faults 367,139 371,948
cache-misses 54,240,196,814 55,654,206,041
sched:sched_move_numa 1,571 1,856
sched:sched_stick_numa 9 4
sched:sched_swap_numa 463 428
migrate:mm_migrate_pages 703 898
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 50155 57146
numa_hint_faults_local 45264 51612
numa_hit 239652 238164
numa_huge_pte_updates 36 16
numa_interleave 68 63
numa_local 239576 238085
numa_other 76 79
numa_pages_migrated 680 883
numa_pte_updates 71146 67540
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,156,720 3,288,525
migrations 30,354 38,652
faults 97,261 111,678
cache-misses 12,400,026,826 12,111,197,376
sched:sched_move_numa 4 900
sched:sched_stick_numa 0 0
sched:sched_swap_numa 1 5
migrate:mm_migrate_pages 20 714
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 272 18572
numa_hint_faults_local 186 14850
numa_hit 71362 73197
numa_huge_pte_updates 0 11
numa_interleave 23 25
numa_local 71299 73138
numa_other 63 59
numa_pages_migrated 2 712
numa_pte_updates 0 24021
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,606,824 8,451,543
migrations 155,352 202,804
faults 301,409 310,024
cache-misses 157,759,224 253,522,507
sched:sched_move_numa 168 213
sched:sched_stick_numa 0 0
sched:sched_swap_numa 3 2
migrate:mm_migrate_pages 125 88
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 4650 11830
numa_hint_faults_local 3946 11301
numa_hit 90489 90038
numa_huge_pte_updates 0 0
numa_interleave 892 855
numa_local 90034 89796
numa_other 455 242
numa_pages_migrated 124 88
numa_pte_updates 4818 12039
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,113,167 2,049,153
migrations 10,533 11,405
faults 142,727 162,309
cache-misses 5,594,192 7,203,343
sched:sched_move_numa 10 22
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 6 1
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 744 1693
numa_hint_faults_local 584 1669
numa_hit 25551 25177
numa_huge_pte_updates 0 0
numa_interleave 263 194
numa_local 25302 24993
numa_other 249 184
numa_pages_migrated 6 1
numa_pte_updates 744 1577
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 101,227,352 94,515,937
migrations 4,151,829 4,203,554
faults 745,233 832,697
cache-misses 224,669,561,766 226,248,698,331
sched:sched_move_numa 617 1,730
sched:sched_stick_numa 2 14
sched:sched_swap_numa 187 432
migrate:mm_migrate_pages 316 1,398
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 24195 80079
numa_hint_faults_local 21639 68620
numa_hit 238331 241187
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 238331 241186
numa_other 0 1
numa_pages_migrated 204 1347
numa_pte_updates 24561 80729
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 62,738,978 63,704,961
migrations 562,702 573,404
faults 228,465 230,878
cache-misses 75,778,067,952 76,568,222,781
sched:sched_move_numa 648 509
sched:sched_stick_numa 13 31
sched:sched_swap_numa 137 182
migrate:mm_migrate_pages 733 541
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 10281 8501
numa_hint_faults_local 3242 2960
numa_hit 36338 35526
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36338 35526
numa_other 0 0
numa_pages_migrated 706 539
numa_pte_updates 10176 8433
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-4-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This additional parameter (new_cpu) is used later for identifying if
task migration is across nodes.
No functional change.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 203353 200668 -1.32036
1 328205 321791 -1.95427
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 214384 204848 -4.44809
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 188553 188098 -0.241311
1 196273 200351 2.07772
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 57581.2 58145.9 0.980702
1 103468 103798 0.318939
Brings out the variance between different specjbb2005 runs.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,941,377 13,912,183
migrations 1,157,323 1,155,931
faults 382,175 367,139
cache-misses 54,993,823,500 54,240,196,814
sched:sched_move_numa 2,005 1,571
sched:sched_stick_numa 14 9
sched:sched_swap_numa 529 463
migrate:mm_migrate_pages 1,573 703
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 67099 50155
numa_hint_faults_local 58456 45264
numa_hit 240416 239652
numa_huge_pte_updates 18 36
numa_interleave 65 68
numa_local 240339 239576
numa_other 77 76
numa_pages_migrated 1574 680
numa_pte_updates 77182 71146
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,176,453 3,156,720
migrations 30,238 30,354
faults 87,869 97,261
cache-misses 12,544,479,391 12,400,026,826
sched:sched_move_numa 23 4
sched:sched_stick_numa 0 0
sched:sched_swap_numa 6 1
migrate:mm_migrate_pages 10 20
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 236 272
numa_hint_faults_local 201 186
numa_hit 72293 71362
numa_huge_pte_updates 0 0
numa_interleave 26 23
numa_local 72233 71299
numa_other 60 63
numa_pages_migrated 8 2
numa_pte_updates 0 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,478,820 8,606,824
migrations 171,323 155,352
faults 307,499 301,409
cache-misses 240,353,599 157,759,224
sched:sched_move_numa 214 168
sched:sched_stick_numa 0 0
sched:sched_swap_numa 4 3
migrate:mm_migrate_pages 89 125
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 5301 4650
numa_hint_faults_local 4745 3946
numa_hit 92943 90489
numa_huge_pte_updates 0 0
numa_interleave 899 892
numa_local 92345 90034
numa_other 598 455
numa_pages_migrated 88 124
numa_pte_updates 5505 4818
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,066,172 2,113,167
migrations 11,076 10,533
faults 149,544 142,727
cache-misses 10,398,067 5,594,192
sched:sched_move_numa 43 10
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 6 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 3552 744
numa_hint_faults_local 3347 584
numa_hit 25611 25551
numa_huge_pte_updates 0 0
numa_interleave 213 263
numa_local 25583 25302
numa_other 28 249
numa_pages_migrated 6 6
numa_pte_updates 3535 744
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 99,358,136 101,227,352
migrations 4,041,607 4,151,829
faults 749,653 745,233
cache-misses 225,562,543,251 224,669,561,766
sched:sched_move_numa 771 617
sched:sched_stick_numa 14 2
sched:sched_swap_numa 204 187
migrate:mm_migrate_pages 1,180 316
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 27409 24195
numa_hint_faults_local 20677 21639
numa_hit 239988 238331
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 239983 238331
numa_other 5 0
numa_pages_migrated 1016 204
numa_pte_updates 27916 24561
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 60,899,307 62,738,978
migrations 544,668 562,702
faults 270,834 228,465
cache-misses 74,543,455,635 75,778,067,952
sched:sched_move_numa 735 648
sched:sched_stick_numa 25 13
sched:sched_swap_numa 174 137
migrate:mm_migrate_pages 816 733
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 11059 10281
numa_hint_faults_local 4733 3242
numa_hit 41384 36338
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 41383 36338
numa_other 1 0
numa_pages_migrated 815 706
numa_pte_updates 11323 10176
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Task migration under NUMA balancing can happen in parallel. More than
one task might choose to migrate to the same CPU at the same time. This
can result in:
- During task swap, choosing a task that was not part of the evaluation.
- During task swap, task which just got moved into its preferred node,
moving to a completely different node.
- During task swap, task failing to move to the preferred node, will have
to wait an extra interval for the next migrate opportunity.
- During task movement, multiple task movements can cause load imbalance.
This problem is more likely if there are more cores per node or more
nodes in the system.
Use a per run-queue variable to check if NUMA-balance is active on the
run-queue.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 200194 203353 1.57797
1 311331 328205 5.41995
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
1 197654 214384 8.46429
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 192605 188553 -2.10379
1 213402 196273 -8.02664
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 52227.1 57581.2 10.2516
1 102529 103468 0.915838
There is a regression on power 9 box. If we look at the details,
that box has a sudden jump in cache-misses with this patch.
All other parameters seem to be pointing towards NUMA
consolidation.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 13,345,784 13,941,377
migrations 1,127,820 1,157,323
faults 374,736 382,175
cache-misses 55,132,054,603 54,993,823,500
sched:sched_move_numa 1,923 2,005
sched:sched_stick_numa 52 14
sched:sched_swap_numa 595 529
migrate:mm_migrate_pages 1,932 1,573
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 60605 67099
numa_hint_faults_local 51804 58456
numa_hit 239945 240416
numa_huge_pte_updates 14 18
numa_interleave 60 65
numa_local 239865 240339
numa_other 80 77
numa_pages_migrated 1931 1574
numa_pte_updates 67823 77182
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,016,467 3,176,453
migrations 37,326 30,238
faults 115,342 87,869
cache-misses 11,692,155,554 12,544,479,391
sched:sched_move_numa 965 23
sched:sched_stick_numa 8 0
sched:sched_swap_numa 35 6
migrate:mm_migrate_pages 1,168 10
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 16286 236
numa_hint_faults_local 11863 201
numa_hit 112482 72293
numa_huge_pte_updates 33 0
numa_interleave 20 26
numa_local 112419 72233
numa_other 63 60
numa_pages_migrated 1144 8
numa_pte_updates 32859 0
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,629,724 8,478,820
migrations 221,052 171,323
faults 308,661 307,499
cache-misses 135,574,913 240,353,599
sched:sched_move_numa 147 214
sched:sched_stick_numa 0 0
sched:sched_swap_numa 2 4
migrate:mm_migrate_pages 64 89
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 11481 5301
numa_hint_faults_local 10968 4745
numa_hit 89773 92943
numa_huge_pte_updates 0 0
numa_interleave 1116 899
numa_local 89220 92345
numa_other 553 598
numa_pages_migrated 62 88
numa_pte_updates 11694 5505
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,272,887 2,066,172
migrations 12,206 11,076
faults 163,704 149,544
cache-misses 4,801,186 10,398,067
sched:sched_move_numa 44 43
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 17 6
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 2261 3552
numa_hint_faults_local 1993 3347
numa_hit 25726 25611
numa_huge_pte_updates 0 0
numa_interleave 239 213
numa_local 25498 25583
numa_other 228 28
numa_pages_migrated 17 6
numa_pte_updates 2266 3535
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 117,980,962 99,358,136
migrations 3,950,220 4,041,607
faults 736,979 749,653
cache-misses 224,976,072,879 225,562,543,251
sched:sched_move_numa 504 771
sched:sched_stick_numa 50 14
sched:sched_swap_numa 239 204
migrate:mm_migrate_pages 1,260 1,180
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 18293 27409
numa_hint_faults_local 11969 20677
numa_hit 240854 239988
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 240851 239983
numa_other 3 5
numa_pages_migrated 1190 1016
numa_pte_updates 18106 27916
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 61,053,158 60,899,307
migrations 551,586 544,668
faults 244,174 270,834
cache-misses 74,326,766,973 74,543,455,635
sched:sched_move_numa 344 735
sched:sched_stick_numa 24 25
sched:sched_swap_numa 140 174
migrate:mm_migrate_pages 568 816
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 6461 11059
numa_hint_faults_local 2283 4733
numa_hit 35661 41384
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 35661 41383
numa_other 0 1
numa_pages_migrated 568 815
numa_pte_updates 6518 11323
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In Family 17h, some L3 Cache Performance events require the ThreadMask
and SliceMask to be set. For other events, these fields do not affect
the count either way.
Set ThreadMask and SliceMask to 0xFF and 0xF respectively.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee <Suravee.Suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/Message-ID:
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The counters on M3UPI Link 0 and Link 3 don't count properly, and writing
0 to these counters may causes system crash on some machines.
The PCI BDF addresses of the M3UPI in the current code are incorrect.
The correct addresses should be:
D18:F1 0x204D
D18:F2 0x204E
D18:F5 0x204D
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1537538826-55489-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some of the scheduling tracepoints allow the perf_tp_event
code to write to ring buffer under different cpu than the
code is running on.
This results in corrupted ring buffer data demonstrated in
following perf commands:
# perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.383 [sec]
[ perf record: Woken up 8 times to write data ]
0x42b890 [0]: failed to process type: -1765585640
[ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ]
# perf report --stdio
0x42b890 [0]: failed to process type: -1765585640
The reason for the corruption are some of the scheduling tracepoints,
that have __perf_task dfined and thus allow to store data to another
cpu ring buffer:
sched_waking
sched_wakeup
sched_wakeup_new
sched_stat_wait
sched_stat_sleep
sched_stat_iowait
sched_stat_blocked
The perf_tp_event function first store samples for current cpu
related events defined for tracepoint:
hlist_for_each_entry_rcu(event, head, hlist_entry)
perf_swevent_event(event, count, &data, regs);
And then iterates events of the 'task' and store the sample
for any task's event that passes tracepoint checks:
ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->attr.type != PERF_TYPE_TRACEPOINT)
continue;
if (event->attr.config != entry->type)
continue;
perf_swevent_event(event, count, &data, regs);
}
Above code can race with same code running on another cpu,
ending up with 2 cpus trying to store under the same ring
buffer, which is specifically not allowed.
This patch prevents the problem, by allowing only events with the same
current cpu to receive the event.
NOTE: this requires the use of (per-task-)per-cpu buffers for this
feature to work; perf-record does this.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
[peterz: small edits to Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: e6dab5ffab59 ("perf/trace: Add ability to set a target task for events")
Link: http://lkml.kernel.org/r/20180923161343.GB15054@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Physical package id 0 doesn't always exist, we should use
boot_cpu_data.phys_proc_id here.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20180910144750.6782-1-msys.mizuma@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|