| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Red Hat's QE team reported test failure on access_tracking_perf_test:
Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages
guest physical test memory offset: 0x3fffbffff000
Populating memory : 0.684014577s
Writing to populated memory : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
lib/kvm_util.c:1411: false
pid=125806 tid=125809 errno=4 - Interrupted system call
1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
2 (inlined by) addr_gpa2hva at kvm_util.c:1405
3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
6 0x00007fefe9ff81ce: ?? ??:0
7 0x00007fefe9c64d82: ?? ??:0
No vm physical memory at 0xffbffff000
I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.
It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated. In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.
The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield. Remove the bit fields and using manual masking
instead.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from xfrm and can.
Current release - regressions:
- rxrpc: restore removed timer deletion
Current release - new code bugs:
- gre: fix device lookup for l3mdev use-case
- xfrm: fix egress device lookup for l3mdev use-case
Previous releases - regressions:
- sched: cls_u32: fix netns refcount changes in u32_change()
- smc: fix sock leak when release after smc_shutdown()
- xfrm: limit skb_page_frag_refill use to a single page
- eth: atlantic: invert deep par in pm functions, preventing null
derefs
- eth: stmmac: use readl_poll_timeout_atomic() in atomic state
Previous releases - always broken:
- gre: fix skb_under_panic on xmit
- openvswitch: fix OOB access in reserve_sfa_size()
- dsa: hellcreek: calculate checksums in tagger
- eth: ice: fix crash in switchdev mode
- eth: igc:
- fix infinite loop in release_swfw_sync
- fix scheduling while atomic"
* tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
drivers: net: hippi: Fix deadlock in rr_close()
selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets
selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets
nfc: MAINTAINERS: add Bug entry
net: stmmac: Use readl_poll_timeout_atomic() in atomic state
doc/ip-sysctl: add bc_forwarding
netlink: reset network and mac headers in netlink_dump()
net: mscc: ocelot: fix broken IP multicast flooding
net: dsa: hellcreek: Calculate checksums in tagger
net: atlantic: invert deep par in pm functions, preventing null derefs
can: isotp: stop timeout monitoring when no first frame was sent
bonding: do not discard lowest hash bit for non layer3+4 hashing
net: lan966x: Make sure to release ptp interrupt
ipv6: make ip6_rt_gc_expire an atomic_t
net: Handle l3mdev in ip_tunnel_init_flow
l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu
net/sched: cls_u32: fix possible leak in u32_init_knode()
net/sched: cls_u32: fix netns refcount changes in u32_change()
powerpc: Update MAINTAINERS for ibmvnic and VAS
net: restore alpha order to Ethernet devices in config
...
|
|
When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:
kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
44 | (void) (&_max1 == &_max2); \
| ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
281 | alignment = max(0x100000, alignment);
| ^~~
Fix it by adjusting the type of the absolute value.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Switching to libbpf 1.0 API broke test_lpm_map and test_lru_map as error
reporting changed. Instead of setting errno and returning -1 bpf calls
now return -Exxx directly.
Drop errno checks and look at return code directly.
Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421094320.1563570-1-asavkov@redhat.com
|
|
I am getting the following compilation error for prog_tests/uprobe_autoattach.c:
tools/testing/selftests/bpf/prog_tests/uprobe_autoattach.c: In function ‘test_uprobe_autoattach’:
./test_progs.h:209:26: error: pointer ‘mem’ may be used after ‘free’ [-Werror=use-after-free]
The value of mem is now used in one of the asserts, which is why it may be
confusing compilers. However, it is not dereferenced. Silence this by moving
free(mem) after the assert block.
Fixes: 1717e248014c ("selftests/bpf: Uprobe tests should verify param/return values")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132317.1583867-1-asavkov@redhat.com
|
|
Switching to libbpf 1.0 API broke test_sock and test_sysctl as they
check for return of bpf_prog_attach to be exactly -1. Switch the check
to '< 0' instead.
Fixes: b858ba8c52b6 ("selftests/bpf: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220421130104.1582053-1-asavkov@redhat.com
|
|
The torture.sh script provides extra memory for scftorture and rcuscale.
However, the total memory provided is only 1G, which is less than the
2G that is required for KASAN testing. This commit therefore ups the
torture.sh script's 1G to 2G.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Now that the Tasks RCU flavors are selected by their users rather than
by the rcutorture scenarios, torture.sh fails when attempting to run
NOPREEMPT scenarios for refscale and rcuscale. This commit therefore
makes torture.sh specify CONFIG_TASKS_TRACE_RCU=y to avoid such failure.
Why not also CONFIG_TASKS_RCU? Because tracing selects this one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
KASAN allots significant memory to track allocation state, and the amount
of memory has increased recently, which results in frequent OOMs on a
few of the rcutorture scenarios. This commit therefore provides 2G of
memory for --kasan runs, up from the 512M default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, torture.sh saves only the build output and exit code from the
"make allmodconfig" test. This commit also saves the .config file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There is an extraneous "scf" in the per_version_boot_params shell function
used by scftorture. No harm done in that it is just passed as an argument
to the /init program in initrd, but this commit nevertheless removes it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, kernels that are
ostensibly built with CONFIG_PREEMPT_NONE=y or CONFIG_PREEMPT_VOLUNTARY=y
are now actually built with CONFIG_PREEMPT=y, but are by default booted
so as to disable preemption. Although this allows much more flexibility
from a single kernel binary, it means that the current rcutorture
scenarios won't find build errors that happen only when preemption is
fully disabled at build time.
This commit therefore adds CONFIG_PREEMPT_DYNAMIC=n to several scenarios,
and while in the area switches one from CONFIG_PREEMPT_NONE=y to
CONFIG_PREEMPT_VOLUNTARY=y to add coverage of this Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit passes the csdlock_debug=1 kernel parameter in order to
enable CSD-lock stall reports for torture.sh scftorure runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kvm-again.sh script reruns an previously built set of kernels, so
the vmlinux files are associated with that previous run, not this on.
This results in kvm-find_errors.sh reporting spurious failed-build errors.
This commit therefore omits the vmlinux check for kvm-again.sh runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adjusts the scftorture PREEMPT and NOPREEMPT scenarios to
account for the TASKS_RCU Kconfig option being explicitly selected rather
than computed in isolation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcutorture test suite makes double use of the rcutorture.stat_interval
module parameter. As its name suggests, it controls the frequency
of statistics printing, but it also controls the rcu_torture_writer()
stall timeout. The current setting of 15 seconds works surprisingly well.
However, given that the RCU tasks stall-warning timeout is ten -minutes-,
15 seconds is too short for TASKS02, which runs a non-preemptible kernel
on a single CPU.
This commit therefore adds checks for per-scenario specification of the
rcutorture.stat_interval module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Now that CONFIG_PREEMPT_DYNAMIC=y is the default, TASKS02 no longer
builds a pure non-preemptible kernel that uses Tiny RCU. This commit
therefore fixes this new hole in rcutorture testing by adding
CONFIG_PREEMPT_DYNAMIC=n to the TASKS02 rcutorture scenario.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Use bpf_prog_test_run_opts to test the skb_load_bytes function. Tests
the behavior when offset is greater than INT_MAX or a normal value.
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220416105801.88708-4-liujian56@huawei.com
|
|
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae25 ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drop duplicate macro min() definition in mq_perf_tests.c, use MIN() in
sys/param.h instead.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This is the mips variant of commit <3990b5baf225> ("selftests/ftrace:
Add s390 support for kprobe args tests").
Signed-off-by: Ze Zhang <zhangze@loongson.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a few test cases that ensure we catch cases of badly ordered type
tags in modifier chains.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220419164608.1990559-3-memxor@gmail.com
|
|
Take advantage of new libbpf feature for declarative non-autoloaded BPF
program SEC() definitions in few test that test single program at a time
out of many available programs within the single BPF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419002452.632125-2-andrii@kernel.org
|
|
The llvm patch [1] enabled opaque pointer which caused selftest
'exhandler' failure.
...
; work = task->task_works;
7: (79) r1 = *(u64 *)(r6 +2120) ; R1_w=ptr_callback_head(off=0,imm=0) R6_w=ptr_task_struct(off=0,imm=0)
; func = work->func;
8: (79) r2 = *(u64 *)(r1 +8) ; R1_w=ptr_callback_head(off=0,imm=0) R2_w=scalar()
; if (!work && !func)
9: (4f) r1 |= r2
math between ptr_ pointer and register with unbounded min value is not allowed
below is insn 10 and 11
10: (55) if r1 != 0 goto +5
11: (18) r1 = 0 ll
...
In llvm, the code generation of 'r1 |= r2' happened in codegen
selectiondag phase due to difference of opaque pointer vs. non-opaque pointer.
Without [1], the related code looks like:
r2 = *(u64 *)(r6 + 2120)
r1 = *(u64 *)(r2 + 8)
if r2 != 0 goto +6 <LBB0_4>
if r1 != 0 goto +5 <LBB0_4>
r1 = 0 ll
...
I haven't found a good way in llvm to fix this issue. So let us workaround the
problem first so bpf CI won't be blocked.
[1] https://reviews.llvm.org/D123300
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419050900.3136024-1-yhs@fb.com
|
|
LLVM commit [1] changed loop pragma behavior such that
full loop unroll is always honored with user pragma.
Previously, unroll count also depends on the unrolled
code size. For pyperf600, without [1], the loop unroll
count is 150. With [1], the loop unroll count is 600.
The unroll count of 600 caused the program size close to
298k and this caused the following code is generated:
0: 7b 1a 00 ff 00 00 00 00 *(u64 *)(r10 - 256) = r1
; uint64_t pid_tgid = bpf_get_current_pid_tgid();
1: 85 00 00 00 0e 00 00 00 call 14
2: bf 06 00 00 00 00 00 00 r6 = r0
; pid_t pid = (pid_t)(pid_tgid >> 32);
3: bf 61 00 00 00 00 00 00 r1 = r6
4: 77 01 00 00 20 00 00 00 r1 >>= 32
5: 63 1a fc ff 00 00 00 00 *(u32 *)(r10 - 4) = r1
6: bf a2 00 00 00 00 00 00 r2 = r10
7: 07 02 00 00 fc ff ff ff r2 += -4
; PidData* pidData = bpf_map_lookup_elem(&pidmap, &pid);
8: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
10: 85 00 00 00 01 00 00 00 call 1
11: bf 08 00 00 00 00 00 00 r8 = r0
; if (!pidData)
12: 15 08 15 e8 00 00 00 00 if r8 == 0 goto -6123 <LBB0_27588+0xffffffffffdae100>
Note that insn 12 has a branch offset -6123 which is clearly illegal
and will be rejected by the verifier. The negative offset is due to
the branch range is greater than INT16_MAX.
This patch changed the unroll count to be 150 to avoid above
branch target insn out-of-range issue. Also the llvm is enhanced ([2])
to assert if the branch target insn is out of INT16 range.
[1] https://reviews.llvm.org/D119148
[2] https://reviews.llvm.org/D123877
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220419043230.2928530-1-yhs@fb.com
|
|
This is a pre-req to add separate logging for each subtest in
test_progs.
Move all the mutable test data to the test_result struct.
Move per-test init/de-init into the run_one_test function.
Consolidate data aggregation and final log output in
calculate_and_print_summary function.
As a side effect, this patch fixes double counting of errors
for subtests and possible duplicate output of subtest log
on failures.
Also, add prog_tests_framework.c test to verify some of the
counting logic.
As part of verification, confirmed that number of reported
tests is the same before and after the change for both parallel
and sequential test execution.
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220418222507.1726259-1-mykolal@fb.com
|
|
Introduce basic line card manipulation which consists of provisioning,
unprovisioning and activation of a line card.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to test various backward-edge control flow integrity methods,
add a test that manipulates the return address on the stack. Currently
only arm64 Pointer Authentication and Shadow Call Stack is supported.
$ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT
Under SCS, successful test of the mitigation is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: ok: control flow unchanged.
Under PAC, successful test of the mitigation is reported by the PAC
exception handler:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
Unable to handle kernel paging request at virtual address bfffffc0088d0514
Mem abort info:
ESR = 0x86000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
[bfffffc0088d0514] address between user and kernel address ranges
...
If the CONFIGs are missing (or the mitigation isn't working), failure
is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: FAIL: stack return address was redirected!
lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y
Co-developed-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
|
|
Pull Kselftest fixes from Shuah Khan:
"A mqueue perf test memory leak bug fix.
mq_perf_tests failed to call CPU_FREE to free memory allocated by
CPU_SET"
* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
|
|
|
|
+WARNING: Possible comma where semicolon could be used
+#397: FILE: tools/testing/selftests/kvm/x86_64/xen_shinfo_test.c:700:
++ tmr.type = KVM_XEN_VCPU_ATTR_TYPE_TIMER,
++ vcpu_ioctl(vm, VCPU_ID, KVM_XEN_VCPU_GET_ATTR, &tmr);
Fixes: 25eaeebe710c ("KVM: x86/xen: Add self tests for KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-4-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add boilerplate test loop in test to run all tests
in fib_rule_tests.sh
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Miscellaneous bugfixes
- A small cleanup for the new workqueue code
- Documentation syntax fix
RISC-V:
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
ARM:
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits)
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
KVM: SVM: Do not activate AVIC for SEV-enabled guest
Documentation: KVM: Add SPDX-License-Identifier tag
selftests: kvm: add tsc_scaling_sync to .gitignore
RISC-V: KVM: include missing hwcap.h into vcpu_fp
KVM: selftests: riscv: Fix alignment of the guest_hang() function
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
selftests: KVM: Don't leak GIC FD across dirty log test iterations
KVM: Don't create VM debugfs files outside of the VM directory
KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
KVM: arm64: selftests: Introduce vcpu_width_config
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM: arm64: vgic: Remove unnecessary type castings
KVM: arm64: Don't split hugepages outside of MMU write lock
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
KVM: arm64: Generally disallow SMC64 for AArch32 guests
...
|
|
It wasn't clear when SLAB_LINEAR_OVERFLOW would be expected to trip.
Explicitly describe it and include the CONFIGs in the kselftest.
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes: 7820b0715b6f ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Boiler plate for testing static mdb entries. This first test verifies
adding and removing host mdb entries for all supported types: IPv4,
IPv6, and MAC multicast.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For consecutive numbers the lscpu command collapses the output and just
shows the range with start and end. The processors are numbered that
way on POWER8.
$ sudo ppc64_cpu --smt=8
$ lscpu | grep '^NUMA node'
NUMA node(s): 2
NUMA node0 CPU(s): 0-79
NUMA node8 CPU(s): 80-159
This causes the heuristic to detect the number threads per core, looking
for the number after the first comma, to fail, and QEMU aborts because of
invalid arguments.
$ lscpu | grep '^NUMA node0' | sed -e 's/^[^,-]*(,|\-)\([0-9]*\),.*$/\1/'
NUMA node0 CPU(s): 0-79
But the lscpu command shows the number of threads per core:
$ sudo ppc64_cpu --smt=8
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 8
$ sudo ppc64_cpu --smt=off
$ lscpu | grep 'Thread(s) per core'
Thread(s) per core: 1
This commit therefore directly uses that value and replaces use of grep
with "sed -n" and its "p" command.
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit weakens the checks of the kvm.sh script's --torture parameter
and the kvm-recheck.sh script's parsing so that experimental torture tests
may be created without updating these two scripts. The changes required
are to the appropriate Makefile and Kconfig file, plus a directory
whose name begins with "X" must be added to the rcutorture/configs file.
This new directory's name can then be passed in via the kvm.sh script's
--torture parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
Paolo Bonzini
Linus Torvalds
Thomas Huth
Artem Savkov
Paul E. McKenney
Liu Jian
Ido Schimmel
Geliang Tang
Ze Zhang
Kumar Kartikeya Dwivedi
Andrii Nakryiko
Yonghong Song
Mykola Lysenko
Jiri Pirko
Arun Ajith S
Kees Cook
Paolo Abeni
Like Xu
Alaa Mohamed
Athira Rajeev
Joachim Wiberg
Paul Menzel