aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-12tc-testing: add ETS scheduler to tdc build configurationDavide Caratti1-0/+1
add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file to perform a full tdc run will encounter the following warning: ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully Fixes: 82c664b69c8b ("selftests: qdiscs: Add test coverage for ETS Qdisc") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03selftests/net/fib_tests: update addr_metric_test for peer route testingHangbin Liu1-3/+31
This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-02selftest/lkdtm: Use local .gitignoreChristophe Leroy1-0/+2
Commit 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") introduced patterns for git to ignore files generated in tools/testing/selftests/lkdtm/ Use local .gitignore file instead of using the root one. Fixes: 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-28selftests: pidfd: Add pidfd_fdinfo_test in .gitignoreChristophe Leroy1-0/+1
The commit identified below added pidfd_fdinfo_test but failed to add it to .gitignore Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/966567c7dbaa26a06730d796354f8a086c0ee288.1582847778.git.christophe.leroy@c-s.fr Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-02-26selftests: nft_concat_range: Add test for reported add/flush/add issueStefano Brivio1-4/+39
Add a specific test for the crash reported by Phil Sutter and addressed in the previous patch. The test cases that, in my intention, should have covered these cases, that is, the ones from the 'concurrency' section, don't run these sequences tightly enough and spectacularly failed to catch this. While at it, define a convenient way to add these kind of tests, by adding a "reported issues" test section. It's more convenient, for this particular test, to execute the set setup in its own function. However, future test cases like this one might need to call setup functions, and will typically need no tools other than nft, so allow for this in check_tools(). The original form of the reproducer used here was provided by Phil. Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-25selftests: nft_concat_range: Move option for 'list ruleset' before commandStefano Brivio1-6/+6
Before nftables commit fb9cea50e8b3 ("main: enforce options before commands"), 'nft list ruleset -a' happened to work, but it's wrong and won't work anymore. Replace it by 'nft -a list ruleset'. Reported-by: Chen Yi <yiche@redhat.com> Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-21selftests/vm: add missed tests in run_vmtestsSeongJae Park1-0/+33
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2], and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and thus the 'run_tests' command of kselftests doesn't run those. This commit adds those in the script. 'gup_benchmark' and 'transhuge-stress' are also not included in the 'run_vmtests', but this commit does not add those because those are for performance measurement rather than pass/fail tests. [1] commit 26b4224d9961 ("selftests: expanding more mlock selftest") [2] commit 91cbacc34512 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE") [3] commit fcc1f2d5dd34 ("selftests: add a test program for variable huge page sizes in mmap/shmget") Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-20selftests/rseq: Fix out-of-tree compilationMichael Ellerman1-1/+1
Currently if you build with O=... the rseq tests don't build: $ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq make: Entering directory '/linux/tools/testing/selftests' ... make[1]: Entering directory '/linux/tools/testing/selftests/rseq' gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test /usr/bin/ld: cannot find -lrseq collect2: error: ld returned 1 exit status This is because the library search path points to the source directory, not the output. We can fix it by changing the library search path to $(OUTPUT). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-20selftests: Install settings files to fix TIMEOUT failuresMichael Ellerman5-1/+9
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") added a 45 second timeout for tests, and also added a way for tests to customise the timeout via a settings file. For example the ftrace tests take multiple minutes to run, so they were given longer in commit b43e78f65b1d ("tracing/selftests: Turn off timeout setting"). This works when the tests are run from the source tree. However if the tests are installed with "make -C tools/testing/selftests install", the settings files are not copied into the install directory. When the tests are then run from the install directory the longer timeouts are not applied and the tests timeout incorrectly. So add the settings files to TEST_FILES of the appropriate Makefiles to cause the settings files to be installed using the existing install logic. Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-17selftests: forwarding: vxlan_bridge_1d: use more proper tos valueHangbin Liu1-3/+3
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by: Petr Machata <petrm@mellanox.com> Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16wireguard: selftests: reduce complexity and fix make racesJason A. Donenfeld1-24/+14
This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16selftests: forwarding: vxlan_bridge_1d: fix tos valueHangbin Liu1-3/+3
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ipv6: Fix route replacement with dev-only routeBenjamin Poirier1-0/+6
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testingHangbin Liu1-12/+13
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <pmachata@gmail.com> Tested-by: Petr Machata <pmachata@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13wireguard: device: use icmp_ndo_send helperJason A. Donenfeld1-0/+11
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13selftests: openat2: fix build error on newer glibcAleksa Sarai1-1/+1
It appears that newer glibcs check that openat(O_CREAT) was provided a fourth argument (rather than passing garbage), resulting in the following build error: > In file included from /usr/include/fcntl.h:301, > from helpers.c:9: > In function 'openat', > inlined from 'touchat' at helpers.c:49:11: > /usr/include/x86_64-linux-gnu/bits/fcntl2.h:126:4: error: call to > '__openat_missing_mode' declared with attribute error: openat with O_CREAT > or O_TMPFILE in third argument needs 4 arguments > 126 | __openat_missing_mode (); > | ^~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-13selftests: use LDLIBS for libraries instead of LDFLAGSDmitry Safonov4-5/+5
While building selftests, the following errors were observed: > tools/testing/selftests/timens' > gcc -Wall -Werror -pthread -lrt -ldl timens.c -o tools/testing/selftests/timens/timens > /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers': > timens.c:(.text+0x65a): undefined reference to `timer_create' > collect2: error: ld returned 1 exit status Quoting commit 870f193d48c2 ("selftests: net: use LDLIBS instead of LDFLAGS"): The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. While at here, correct other selftests, not only timens ones. Reported-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Dmitry Safonov <dima@arista.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-12selftests: KVM: Remove unused x86_register enumEric Auger1-20/+0
x86_register enum is not used, let's remove it. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: SVM: Add vmcall testEric Auger2-0/+80
L2 guest calls vmcall and L1 checks the exit status does correspond. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Wei Huang <wei.huang2@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: AMD Nested test infrastructureEric Auger5-1/+517
Add the basic infrastructure needed to test AMD nested SVM. This is largely copied from the KVM unit test infrastructure. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: Replace get_{gdt,idt}_base() by get_{gdt,idt}()Eric Auger2-7/+7
get_gdt_base() and get_idt_base() only return the base address of the descriptor tables. Soon we will need to get the size as well. Change the prototype of those functions so that they return the whole desc_ptr struct instead of the address field. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Wei Huang <wei.huang2@amd.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests/bpf: Mark SYN cookie test skipped for UDP socketsJakub Sitnicki1-1/+3
SYN cookie test with reuseport BPF doesn't make sense for UDP sockets. We don't run it but the test_progs test runner doesn't know about it. Mark the test as skipped so the test_progs can report correctly how many tests were skipped. Fixes: 7ee0d4e97b88 ("selftests/bpf: Switch reuseport tests for test_progs framework") Reported-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200212103208.438419-1-jakub@cloudflare.com
2020-02-12selftests/bpf: Fix error checking on reading the tcp_fastopen sysctlMartin KaFai Lau1-1/+3
There is a typo in checking the "saved_tcp_fo" and instead "saved_tcp_syncookie" is checked again. This patch fixes it and also breaks them into separate if statements such that the test will abort asap. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200211175910.3235321-1-kafai@fb.com
2020-02-10selftests: fix too long argumentJiri Benc1-10/+13
With some shells, the command construed for install of bpf selftests becomes too large due to long list of files: make[1]: execvp: /bin/sh: Argument list too long make[1]: *** [../lib.mk:73: install] Error 127 Currently, each of the file lists is replicated three times in the command: in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that by one instance by using make conditionals and separate the echo and rsync into two shell commands. (One would be inclined to just remove the '@' at the beginning of the rsync command and let 'make' echo it by itself; unfortunately, it appears that the '@' in the front of mkdir silences output also for the following commands.) Also, separate handling of each of the lists to its own shell command. The semantics of the makefile is unchanged before and after the patch. The ability of individual test directories to override INSTALL_RULE is retained. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-10selftests: allow detection of build failuresJiri Benc1-2/+10
Commit 5f70bde26a48 ("selftests: fix build behaviour on targets' failures") added a logic to track failure of builds of individual targets. However, it does exactly the opposite of what a distro kernel needs: we create a RPM package with a selected set of selftests and we need the build to fail if build of any of the targets fail. Both use cases are valid. A distribution kernel is in control of what is included in the kernel and what is being built; any error needs to be flagged and acted upon. A CI system that tries to build as many tests as possible on the best effort basis is not really interested in a failure here and there. Support both use cases by introducing a FORCE_TARGETS variable. It is switched off by default to make life for CI systems easier, distributions can easily switch it on while building their packages. Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-10Kernel selftests: tpm2: check for tpm supportNikita Sobolev2-3/+19
tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0 supported. Check if these files exist before run and mark test as skipped in case of absence. Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-10selftests/ftrace: Have pid filter test use instance flagSteven Rostedt (VMware)1-7/+1
While running the ftracetests, the pid filter test failed because the instance "foo" existed, and it was using it to rerun the test under a instance named foo. The collision caused the test to fail as the mkdir failed as the name already existed. As of commit b5b77be812de7 ("selftests: ftrace: Allow some tests to be run in a tracing instance") all a selftest needs to do to be tested in an instance is to set the "instance" flag. There's no reason a selftest needs to create an instance to run its test in an instance directly. Remove the open coded testing in an instance for the pid filter test and have it set the "instance" flag instead. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-10selftests: fix spelling mistaked "chaigned" -> "chained"Colin Ian King1-1/+1
There is a spelling mistake in a literal string, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-10bpf: Selftests build error in sockmap_basic.cJohn Fastabend1-0/+5
Fix following build error. We could push a tcp.h header into one of the include paths, but I think its easy enough to simply pull in the three defines we need here. If we end up using more of tcp.h at some point we can pull it in later. /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’: /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function) repair = TCP_REPAIR_ON; ^ /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in /home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function) repair = TCP_REPAIR_OFF_NO_WP; Then with fix, $ ./test_progs -n 44 #44/1 sockmap create_update_free:OK #44/2 sockhash create_update_free:OK #44 sockmap_basic:OK Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
2020-02-07selftests/bpf: Test freeing sockmap/sockhash with a socket in itJakub Sitnicki1-0/+74
Commit 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
2020-02-07selftests: mlxsw: Add test cases for local table route replacementIdo Schimmel1-0/+76
Test that routes in the main table do not replace identical routes in the local table and that routes in the local table do replace identical routes in the main table. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06mptcp: fix use-after-free for ipv6Florian Westphal1-0/+9
Turns out that when we accept a new subflow, the newly created inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the listener socket. This wasn't caught by the selftest because it closes the accepted fd before the listening one. adding a close(listenfd) after accept returns is enough: BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790 Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518 Call Trace: inet6_getname+0x6ba/0x790 __sys_getpeername+0x10b/0x250 __x64_sys_getpeername+0x6f/0xb0 also alter test program to exercise this. Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05wireguard: selftests: tie socket waiting to target pidJason A. Donenfeld1-9/+8
Without this, we wind up proceeding too early sometimes when the previous process has just used the same listening port. So, we tie the listening socket query to the specific pid we're interested in. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05wireguard: selftests: cleanup CONFIG_ENABLE_WARN_DEPRECATEDKrzysztof Kozlowski1-1/+0
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05wireguard: selftests: ensure non-addition of peers with failed precomputationJason A. Donenfeld1-0/+6
Ensure that peers with low order points are ignored, both in the case where we already have a device private key and in the case where we do not. This adds points that naturally give a zero output. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04tc-testing: add missing 'nsPlugin' to basic.jsonDavide Caratti1-0/+51
since tdc tests for cls_basic need $DEV1, use 'nsPlugin' so that the following command can be run without errors: [root@f31 tc-testing]# ./tdc.py -c basic Fixes: 4717b05328ba ("tc-testing: Introduced tdc tests for basic filter") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04tc-testing: fix eBPF tests failure on linux fresh clonesDavide Caratti1-1/+1
when the following command is done on a fresh clone of the kernel tree, [root@f31 tc-testing]# ./tdc.py -c bpf test cases that need to build the eBPF sample program fail systematically, because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the 'khdr' target fails). Pass the correct environment to 'make', in place of ENVIR, to allow running these tests. Fixes: 4c2d39bd40c1 ("tc-testing: use a plugin to build eBPF program") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04selftests/bpf: Fix trampoline_count.c selftest compilation warningAndrii Nakryiko1-1/+1
Fix missing braces compilation warning in trampoline_count test: .../prog_tests/trampoline_count.c: In function ‘test_trampoline_count’: .../prog_tests/trampoline_count.c:49:9: warning: missing braces around initializer [-Wmissing-braces] struct inst inst[MAX_TRAMP_PROGS] = { 0 }; ^ .../prog_tests/trampoline_count.c:49:9: warning: (near initialization for ‘inst[0]’) [-Wmissing-braces] Fixes: d633d57902a5 ("selftest/bpf: Add test for allowed trampolines count") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200202065152.2718142-1-andriin@fb.com
2020-02-02selftests: net: Add FIN_ACK processing order related latency spike testSeongJae Park4-0/+189
This commit adds a test for FIN_ACK process races related reconnection latency spike issues. The issue has described and solved by the previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is received"). The test program is configured with a server and a client process. The server creates and binds a socket to a port that dynamically allocated, listen on it, and start a infinite loop. Inside the loop, it accepts connection, reads 4 bytes from the socket, and closes the connection. The client is constructed as an infinite loop. Inside the loop, it creates a socket with LINGER and NODELAY option, connect to the server, send 4 bytes data, try read some data from server. After the read() returns, it measure the latency from the beginning of this loop to this point and if the latency is larger than 1 second (spike), print a message. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-31mm/gup_benchmark: use proper FOLL_WRITE flags instead of hard-coding "1"John Hubbard1-1/+5
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a hard-coded "1" value. Also, clean up the filtering of gup flags a little, by just doing it once before issuing any of the get_user_pages*() calls. This makes it harder to overlook, instead of having little "gup_flags & 1" phrases in the function calls. Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31selftests: KVM: testing the local IRQs resetsPierre Morel1-0/+42
Local IRQs are reset by a normal cpu reset. The initial cpu reset and the clear cpu reset, as superset of the normal reset, both clear the IRQs too. Let's inject an interrupt to a vCPU before calling a reset and see if it is gone after the reset. We choose to inject only an emergency interrupt at this point and can extend the test to other types of IRQs later. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> [minor fixups] Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31selftests: KVM: s390x: Add reset testsJanosch Frank2-0/+156
Test if the registers end up having the correct values after a normal, initial and clear reset. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31selftests: KVM: Add fpu and one reg set/get library functionsJanosch Frank2-0/+42
Add library access to more registers. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-5-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-28tracing: Add new testcases for hist trigger parsing errorsTom Zanussi1-0/+32
Add a testcase ensuring that the tracing error_log correctly displays hist trigger parsing errors. Link: http://lkml.kernel.org/r/62ec58d9aca661cde46ba678e32a938427945e9e.1561743018.git.zanussi@kernel.org Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-28selftests/ftrace: fix glob selftestSven Schnelle1-1/+1
test.d/ftrace/func-filter-glob.tc is failing on s390 because it has ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual __raw_spin_lock symbol isn't in the ftrace function list. Change '*aw*lock' to '*spin*lock' which would hopefully match some of the locking functions on all platforms. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-27selftests: settings: tests can be in subsubdirsMatthieu Baerts1-1/+1
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") adds support for a new per-test-directory "settings" file. But this only works for tests not in a sub-subdirectories, e.g. - tools/testing/selftests/rtc (rtc) is OK, - tools/testing/selftests/net/mptcp (net/mptcp) is not. We have to increase the timeout for net/mptcp tests which are not upstreamed yet but this fix is valid for other tests if they need to add a "settings" file, see the full list with: tools/testing/selftests/*/*/**/Makefile Note that this patch changes the text header message printed at the end of the execution but this text is modified only for the tests that are in sub-subdirectories, e.g. ok 1 selftests: net/mptcp: mptcp_connect.sh Before we had: ok 1 selftests: mptcp: mptcp_connect.sh But showing the full target name is probably better, just in case a subsubdir has the same name as another one in another subdirectory. Fixes: 852c8cbf34d3 (selftests/kselftest/runner.sh: Add 45 second timeout per test) Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-27selftests/bpf: Add test based on port range for BPF flow dissectorYoshiki Komachi1-0/+14
Add a simple test to make sure that a filter based on specified port range classifies packets correctly. Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117070533.402240-3-komachi.yoshiki@gmail.com
2020-01-27selftests: netfilter: Introduce tests for sets with range concatenationStefano Brivio2-1/+1483
This test covers functionality and stability of the newly added nftables set implementation supporting concatenation of ranged fields. For some selected set expression types, test: - correctness, by checking that packets match or don't - concurrency, by attempting races between insertion, deletion, lookup - timeout feature, checking that packets don't match expired entries and (roughly) estimate matching rates, comparing to baselines for simple drop on netdev ingress hook and for hash and rbtrees sets. In order to send packets, this needs one of sendip, netcat or bash. To flood with traffic, iperf3, iperf and netperf are supported. For performance measurements, this relies on the sample pktgen script pktgen_bench_xmit_mode_netif_receive.sh. If none of the tools suitable for a given test are available, specific tests will be skipped. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-25selftest/bpf: Add test for allowed trampolines countJiri Olsa2-0/+133
There's limit of 40 programs tht can be attached to trampoline for one function. Adding test that tries to attach that many plus one extra that needs to fail. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200123161508.915203-4-jolsa@kernel.org
2020-01-26selftests/eeh: Bump EEH wait time to 60sOliver O'Halloran1-3/+7
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s. Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT). Reported-by: Steve Best <sbest@redhat.com> Suggested-by: Douglas Miller <dougmill@us.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com