path: root/tools/testing (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-16selftests: forwarding: vxlan_bridge_1d: fix tos valueHangbin Liu1-3/+3
After commit 71130f29979c ("vxlan: fix tos value before xmit") we start strict vxlan xmit tos value by RT_TOS(), which limits the tos value less than 0x1E. With current value 0x40 the test will failed with "v1: Expected to capture 10 packets, got 0". So let's choose a smaller tos value for testing. Fixes: d417ecf533fe ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ipv6: Fix route replacement with dev-only routeBenjamin Poirier1-0/+6
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472473a ("ipv6: fix ECMP route replacement") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testingHangbin Liu1-12/+13
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect() without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to the inner proto. So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP proto. For test mirror_gre.sh, it may make user confused if we capture ICMP message on $h3(since the flow is GRE message). So I move the capture dev to h3-gt{4,6}, and only capture ICMP message. Before the fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL] Expected to capture 10 packets, got 0. TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality After fix: ]# ./mirror_gre.sh TEST: ingress mirror to gretap (skip_hw) [ OK ] TEST: egress mirror to gretap (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap (skip_hw) [ OK ] TEST: egress mirror to ip6gretap (skip_hw) [ OK ] TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ] TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ] TEST: two simultaneously configured mirrors (skip_hw) [ OK ] WARN: Could not test offloaded functionality Fixes: ba8d39871a10 ("selftests: forwarding: Add test for mirror to gretap") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <pmachata@gmail.com> Tested-by: Petr Machata <pmachata@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13wireguard: device: use icmp_ndo_send helperJason A. Donenfeld1-0/+11
Because wireguard is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. This commit adds a small test to the wireguard test suite to ensure that the new functions continue doing the right thing in the context of wireguard. It does this by setting up a condition that will definately evoke an icmp error message from the driver, but along a nat'd path. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds6-11/+174
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
2020-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-1/+75
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07selftests/bpf: Test freeing sockmap/sockhash with a socket in itJakub Sitnicki1-0/+74
Commit 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
2020-02-07selftests: mlxsw: Add test cases for local table route replacementIdo Schimmel1-0/+76
Test that routes in the main table do not replace identical routes in the local table and that routes in the local table do replace identical routes in the main table. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-0/+240
Pull more KVM updates from Paolo Bonzini: "s390: - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests x86: - Bug fixes and cleanups - AMD support for APIC virtualization even in combination with in-kernel PIT or IOAPIC. MIPS: - Compilation fix. Generic: - Fix refcount overflow for zero page" * tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit x86: vmxfeatures: rename features for consistency with KVM and manual KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses KVM: x86: Fix perfctr WRMSR for running counters x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs() kvm: mmu: Separate generating and setting mmio ptes kvm: mmu: Replace unsigned with unsigned int for PTE access KVM: nVMX: Remove stale comment from nested_vmx_load_cr3() KVM: MIPS: Fold comparecount_func() into comparecount_wakeup() KVM: MIPS: Fix a build error due to referencing not-yet-defined function x86/kvm: do not setup pv tlb flush when not paravirtualized KVM: fix overflow of zero page refcount with ksm running KVM: x86: Take a u64 when checking for a valid dr7 value KVM: x86: use raw clock values consistently KVM: x86: reorganize pvclock_gtod_data members KVM: nVMX: delete meaningless nested_vmx_run() declaration KVM: SVM: allow AVIC without split irqchip kvm: ioapic: Lazy update IOAPIC EOI ...
2020-02-06mptcp: fix use-after-free for ipv6Florian Westphal1-0/+9
Turns out that when we accept a new subflow, the newly created inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the listener socket. This wasn't caught by the selftest because it closes the accepted fd before the listening one. adding a close(listenfd) after accept returns is enough: BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790 Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518 Call Trace: inet6_getname+0x6ba/0x790 __sys_getpeername+0x10b/0x250 __x64_sys_getpeername+0x6f/0xb0 also alter test program to exercise this. Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-0/+32
Pull tracing updates from Steven Rostedt: - Added new "bootconfig". This looks for a file appended to initrd to add boot config options, and has been discussed thoroughly at Linux Plumbers. Very useful for adding kprobes at bootup. Only enabled if "bootconfig" is on the real kernel command line. - Created dynamic event creation. Merges common code between creating synthetic events and kprobe events. - Rename perf "ring_buffer" structure to "perf_buffer" - Rename ftrace "ring_buffer" structure to "trace_buffer" Had to rename existing "trace_buffer" to "array_buffer" - Allow trace_printk() to work withing (some) tracing code. - Sort of tracing configs to be a little better organized - Fixed bug where ftrace_graph hash was not being protected properly - Various other small fixes and clean ups * tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits) bootconfig: Show the number of nodes on boot message tools/bootconfig: Show the number of bootconfig nodes bootconfig: Add more parse error messages bootconfig: Use bootconfig instead of boot config ftrace: Protect ftrace_graph_hash with ftrace_sync ftrace: Add comment to why rcu_dereference_sched() is open coded tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu tracing: Annotate ftrace_graph_hash pointer with __rcu bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline tracing: Use seq_buf for building dynevent_cmd string tracing: Remove useless code in dynevent_arg_pair_add() tracing: Remove check_arg() callbacks from dynevent args tracing: Consolidate some synth_event_trace code tracing: Fix now invalid var_ref_vals assumption in trace action tracing: Change trace_boot to use synth_event interface tracing: Move tracing selftests to bottom of menu tracing: Move mmio tracer config up with the other tracers tracing: Move tracing test module configs together tracing: Move all function tracing configs together tracing: Documentation for in-kernel synthetic event API ...
2020-02-05Merge tag 'kvm-s390-next-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEADPaolo Bonzini4-0/+240
KVM: s390: Fixes and cleanups for 5.6 - fix register corruption - ENOTSUPP/EOPNOTSUPP mixed - reset cleanups/fixes - selftests
2020-02-05wireguard: selftests: tie socket waiting to target pidJason A. Donenfeld1-9/+8
Without this, we wind up proceeding too early sometimes when the previous process has just used the same listening port. So, we tie the listening socket query to the specific pid we're interested in. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05wireguard: selftests: cleanup CONFIG_ENABLE_WARN_DEPRECATEDKrzysztof Kozlowski1-1/+0
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c035372a0 ("deprecate the '__deprecated' attribute warnings entirely and for good"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05wireguard: selftests: ensure non-addition of peers with failed precomputationJason A. Donenfeld1-0/+6
Ensure that peers with low order points are ignored, both in the case where we already have a device private key and in the case where we do not. This adds points that naturally give a zero output. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds6-1/+241
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-04Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds5-7/+183
Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...
2020-02-04tc-testing: add missing 'nsPlugin' to basic.jsonDavide Caratti1-0/+51
since tdc tests for cls_basic need $DEV1, use 'nsPlugin' so that the following command can be run without errors: [root@f31 tc-testing]# ./tdc.py -c basic Fixes: 4717b05328ba ("tc-testing: Introduced tdc tests for basic filter") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04tc-testing: fix eBPF tests failure on linux fresh clonesDavide Caratti1-1/+1
when the following command is done on a fresh clone of the kernel tree, [root@f31 tc-testing]# ./tdc.py -c bpf test cases that need to build the eBPF sample program fail systematically, because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the 'khdr' target fails). Pass the correct environment to 'make', in place of ENVIR, to allow running these tests. Fixes: 4c2d39bd40c1 ("tc-testing: use a plugin to build eBPF program") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04selftests/bpf: Fix trampoline_count.c selftest compilation warningAndrii Nakryiko1-1/+1
Fix missing braces compilation warning in trampoline_count test: .../prog_tests/trampoline_count.c: In function ‘test_trampoline_count’: .../prog_tests/trampoline_count.c:49:9: warning: missing braces around initializer [-Wmissing-braces] struct inst inst[MAX_TRAMP_PROGS] = { 0 }; ^ .../prog_tests/trampoline_count.c:49:9: warning: (near initialization for ‘inst[0]’) [-Wmissing-braces] Fixes: d633d57902a5 ("selftest/bpf: Add test for allowed trampolines count") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200202065152.2718142-1-andriin@fb.com
2020-02-02selftests: net: Add FIN_ACK processing order related latency spike testSeongJae Park4-0/+189
This commit adds a test for FIN_ACK process races related reconnection latency spike issues. The issue has described and solved by the previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is received"). The test program is configured with a server and a client process. The server creates and binds a socket to a port that dynamically allocated, listen on it, and start a infinite loop. Inside the loop, it accepts connection, reads 4 bytes from the socket, and closes the connection. The client is constructed as an infinite loop. Inside the loop, it creates a socket with LINGER and NODELAY option, connect to the server, send 4 bytes data, try read some data from server. After the read() returns, it measure the latency from the beginning of this loop to this point and if the latency is larger than 1 second (spike), print a message. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: SeongJae Park <sjpark@amazon.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-01Merge branch 'topic/user-access-begin' into nextMichael Ellerman2-2/+14
Merge the user_access_begin() series from Christophe. This is based on a commit from Linus that went into v5.5-rc7.
2020-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+5
Pull updates from Andrew Morton: "Most of -mm and quite a number of other subsystems: hotfixes, scripts, ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov. MM is fairly quiet this time. Holidays, I assume" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) kcov: ignore fault-inject and stacktrace include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc() execve: warn if process starts with executable stack reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() init/main.c: fix misleading "This architecture does not have kernel memory protection" message init/main.c: fix quoted value handling in unknown_bootoption init/main.c: remove unnecessary repair_env_string in do_initcall_level init/main.c: log arguments and environment passed to init fs/binfmt_elf.c: coredump: allow process with empty address space to coredump fs/binfmt_elf.c: coredump: delete duplicated overflow check fs/binfmt_elf.c: coredump: allocate core ELF header on stack fs/binfmt_elf.c: make BAD_ADDR() unlikely fs/binfmt_elf.c: better codegen around current->mm fs/binfmt_elf.c: don't copy ELF header around fs/binfmt_elf.c: fix ->start_code calculation fs/binfmt_elf.c: smaller code generation around auxv vector fill lib/find_bit.c: uninline helper _find_next_bit() lib/find_bit.c: join _find_next_bit{_le} uapi: rename ext2_swab() to swab() and share globally in swab.h lib/scatterlist.c: adjust indentation in __sg_alloc_table ...
2020-01-31mm/gup_benchmark: use proper FOLL_WRITE flags instead of hard-coding "1"John Hubbard1-1/+5
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a hard-coded "1" value. Also, clean up the filtering of gup flags a little, by just doing it once before issuing any of the get_user_pages*() calls. This makes it harder to overlook, instead of having little "gup_flags & 1" phrases in the function calls. Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-5/+5
Pull KVM updates from Paolo Bonzini: "This is the first batch of KVM changes. ARM: - cleanups and corner case fixes. PPC: - Bugfixes x86: - Support for mapping DAX areas with large nested page table entries. - Cleanups and bugfixes here too. A particularly important one is a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is also a race condition which could be used in guest userspace to exploit the guest kernel, for which the embargo expired today. - Fast path for IPI delivery vmexits, shaving about 200 clock cycles from IPI latency. - Protect against "Spectre-v1/L1TF" (bring data in the cache via speculative out of bound accesses, use L1TF on the sibling hyperthread to read it), which unfortunately is an even bigger whack-a-mole game than SpectreV1. Sean continues his mission to rewrite KVM. In addition to a sizable number of x86 patches, this time he contributed a pretty large refactoring of vCPU creation that affects all architectures but should not have any visible effect. s390 will come next week together with some more x86 patches" * tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) x86/KVM: Clean up host's steal time structure x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed x86/kvm: Cache gfn to pfn translation x86/kvm: Introduce kvm_(un)map_gfn() x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit KVM: PPC: Book3S PR: Fix -Werror=return-type build failure KVM: PPC: Book3S HV: Release lock on page-out failure path KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer KVM: arm64: pmu: Only handle supported event counters KVM: arm64: pmu: Fix chained SW_INCR counters KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset KVM: x86: Use a typedef for fastop functions KVM: X86: Add 'else' to unify fastop and execute call path KVM: x86: inline memslot_valid_for_gpte KVM: x86/mmu: Use huge pages for DAX-backed files KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte() KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust() KVM: x86/mmu: Zap any compound page when collapsing sptes KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch) ...
2020-01-31selftests: KVM: testing the local IRQs resetsPierre Morel1-0/+42
Local IRQs are reset by a normal cpu reset. The initial cpu reset and the clear cpu reset, as superset of the normal reset, both clear the IRQs too. Let's inject an interrupt to a vCPU before calling a reset and see if it is gone after the reset. We choose to inject only an emergency interrupt at this point and can extend the test to other types of IRQs later. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> [minor fixups] Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31selftests: KVM: s390x: Add reset testsJanosch Frank2-0/+156
Test if the registers end up having the correct values after a normal, initial and clear reset. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-31selftests: KVM: Add fpu and one reg set/get library functionsJanosch Frank2-0/+42
Add library access to more registers. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200131100205.74720-5-frankja@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+402
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-29Merge tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds4-1/+260
Pull thread management updates from Christian Brauner: "Sargun Dhillon over the last cycle has worked on the pidfd_getfd() syscall. This syscall allows for the retrieval of file descriptors of a process based on its pidfd. A task needs to have ptrace_may_access() permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and Andy) on the target. One of the main use-cases is in combination with seccomp's user notification feature. As a reminder, seccomp's user notification feature was made available in v5.0. It allows a task to retrieve a file descriptor for its seccomp filter. The file descriptor is usually handed of to a more privileged supervising process. The supervisor can then listen for syscall events caught by the seccomp filter of the supervisee and perform actions in lieu of the supervisee, usually emulating syscalls. pidfd_getfd() is needed to expand its uses. There are currently two major users that wait on pidfd_getfd() and one future user: - Netflix, Sargun said, is working on a service mesh where users should be able to connect to a dns-based VIP. When a user connects to e.g. that runs e.g. service "foo" they will be redirected to an envoy process. This service mesh uses seccomp user notifications and pidfd to intercept all connect calls and instead of connecting them to connects them to e.g. - LXD uses the seccomp notifier heavily to intercept and emulate mknod() and mount() syscalls for unprivileged containers/processes. With pidfd_getfd() more uses-cases e.g. bridging socket connections will be possible. - The patchset has also seen some interest from the browser corner. Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a broker process. In the future glibc will start blocking all signals during dlopen() rendering this type of sandbox impossible. Hence, in the future Firefox will switch to a seccomp-user-nofication based sandbox which also makes use of file descriptor retrieval. The thread for this can be found at https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html With pidfd_getfd() it is e.g. possible to bridge socket connections for the supervisee (binding to a privileged port) and taking actions on file descriptors on behalf of the supervisee in general. Sargun's first version was using an ioctl on pidfds but various people pushed for it to be a proper syscall which he duely implemented as well over various review cycles. Selftests are of course included. I've also added instructions how to deal with merge conflicts below. There's also a small fix coming from the kernel mentee project to correctly annotate struct sighand_struct with __rcu to fix various sparse warnings. We've received a few more such fixes and even though they are mostly trivial I've decided to postpone them until after -rc1 since they came in rather late and I don't want to risk introducing build warnings. Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is needed to avoid allocation recursions triggerable by storage drivers that have userspace parts that run in the IO path (e.g. dm-multipath, iscsi, etc). These allocation recursions deadlock the device. The new prctl() allows such privileged userspace components to avoid allocation recursions by setting the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags. The patch carries the necessary acks from the relevant maintainers and is routed here as part of prctl() thread-management." * tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim sched.h: Annotate sighand_struct with __rcu test: Add test for pidfd getfd arch: wire up pidfd_getfd syscall pid: Implement pidfd_getfd syscall vfs, fdtable: Add fget_task helper
2020-01-29Merge tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds11-18/+210
Pull Kselftest update from Shuah Khan: "This Kselftest update consists of several fixes to framework and individual tests. In addition, it enables LKDTM tests adding lkdtm target to kselftest Makefile" * tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: fix glob selftest selftests: settings: tests can be in subsubdirs kselftest: Minimise dependency of get_size on C library interfaces selftests/livepatch: Remove unused local variable in set_ftrace_enabled() selftests/livepatch: Replace set_dynamic_debug() with setup_config() in README selftests/lkdtm: Add tests for LKDTM targets selftests: Uninitialized variable in test_cgcore_proc_migration() selftests: fix build behaviour on targets' failures
2020-01-29Merge branch 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds8-0/+1220
Pull openat2 support from Al Viro: "This is the openat2() series from Aleksa Sarai. I'm afraid that the rest of namei stuff will have to wait - it got zero review the last time I'd posted #work.namei, and there had been a leak in the posted series I'd caught only last weekend. I was going to repost it on Monday, but the window opened and the odds of getting any review during that... Oh, well. Anyway, openat2 part should be ready; that _did_ get sane amount of review and public testing, so here it comes" From Aleksa's description of the series: "For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Furthermore, the need for some sort of control over VFS's path resolution (to avoid malicious paths resulting in inadvertent breakouts) has been a very long-standing desire of many userspace applications. This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset (which was a variant of David Drysdale's O_BENEATH patchset[4] which was a spin-off of the Capsicum project[5]) with a few additions and changes made based on the previous discussion within [6] as well as others I felt were useful. In line with the conclusions of the original discussion of AT_NO_JUMPS, the flag has been split up into separate flags. However, instead of being an openat(2) flag it is provided through a new syscall openat2(2) which provides several other improvements to the openat(2) interface (see the patch description for more details). The following new LOOKUP_* flags are added: LOOKUP_NO_XDEV: Blocks all mountpoint crossings (upwards, downwards, or through absolute links). Absolute pathnames alone in openat(2) do not trigger this. Magic-link traversal which implies a vfsmount jump is also blocked (though magic-link jumps on the same vfsmount are permitted). LOOKUP_NO_MAGICLINKS: Blocks resolution through /proc/$pid/fd-style links. This is done by blocking the usage of nd_jump_link() during resolution in a filesystem. The term "magic-links" is used to match with the only reference to these links in Documentation/, but I'm happy to change the name. It should be noted that this is different to the scope of ~LOOKUP_FOLLOW in that it applies to all path components. However, you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it will *not* fail (assuming that no parent component was a magic-link), and you will have an fd for the magic-link. In order to correctly detect magic-links, the introduction of a new LOOKUP_MAGICLINK_JUMPED state flag was required. LOOKUP_BENEATH: Disallows escapes to outside the starting dirfd's tree, using techniques such as ".." or absolute links. Absolute paths in openat(2) are also disallowed. Conceptually this flag is to ensure you "stay below" a certain point in the filesystem tree -- but this requires some additional to protect against various races that would allow escape using "..". Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it can trivially beam you around the filesystem (breaking the protection). In future, there might be similar safety checks done as in LOOKUP_IN_ROOT, but that requires more discussion. In addition, two new flags are added that expand on the above ideas: LOOKUP_NO_SYMLINKS: Does what it says on the tin. No symlink resolution is allowed at all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an fd for the symlink as long as no parent path had a symlink component. LOOKUP_IN_ROOT: This is an extension of LOOKUP_BENEATH that, rather than blocking attempts to move past the root, forces all such movements to be scoped to the starting point. This provides chroot(2)-like protection but without the cost of a chroot(2) for each filesystem operation, as well as being safe against race attacks that chroot(2) is not. If a race is detected (as with LOOKUP_BENEATH) then an error is generated, and similar to LOOKUP_BENEATH it is not permitted to cross magic-links with LOOKUP_IN_ROOT. The primary need for this is from container runtimes, which currently need to do symlink scoping in userspace[7] when opening paths in a potentially malicious container. There is a long list of CVEs that could have bene mitigated by having RESOLVE_THIS_ROOT (such as CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a few). In order to make all of the above more usable, I'm working on libpathrs[8] which is a C-friendly library for safe path resolution. It features a userspace-emulated backend if the kernel doesn't support openat2(2). Hopefully we can get userspace to switch to using it, and thus get openat2(2) support for free once it's ready. Future work would include implementing things like RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow programs to be sure they don't hit DoSes though stale NFS handles)" * 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Documentation: path-lookup: include new LOOKUP flags selftests: add openat2(2) selftests open: introduce openat2(2) syscall namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution namei: LOOKUP_IN_ROOT: chroot-like scoped resolution namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution namei: LOOKUP_NO_XDEV: block mountpoint crossing namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution namei: LOOKUP_NO_SYMLINKS: block symlink resolution namei: allow set_root() to produce errors namei: allow nd_jump_link() to produce errors nsfs: clean-up ns_get_path() signature to return int namei: only return -ECHILD from follow_dotdot_rcu()
2020-01-28tracing: Add new testcases for hist trigger parsing errorsTom Zanussi1-0/+32
Add a testcase ensuring that the tracing error_log correctly displays hist trigger parsing errors. Link: http://lkml.kernel.org/r/62ec58d9aca661cde46ba678e32a938427945e9e.1561743018.git.zanussi@kernel.org Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds236-1887/+14952
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW Add fw overlay feature qed: FW HSI changes qed: FW iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW Parser offsets modified qed: FW Queue Manager changes qed: FW Expose new registers and change windows qed: FW Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-28Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds3-728/+10
Pull x86 cpu-features updates from Ingo Molnar: "The biggest change in this cycle was a large series from Sean Christopherson to clean up the handling of VMX features. This both fixes bugs/inconsistencies and makes the code more coherent and future-proof. There are also two cleanups and a minor TSX syslog messages enhancement" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/cpu: Remove redundant cpu_detect_cache_sizes() call x86/cpu: Print "VMX disabled" error message iff KVM is enabled KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs perf/x86: Provide stubs of KVM helpers for non-Intel CPUs KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits KVM: VMX: Check for full VMX support when verifying CPU compatibility KVM: VMX: Use VMX feature flag to query BIOS enabling KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl() x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_* x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs x86/vmx: Introduce VMX_FEATURES_* x86/cpu: Clear VMX feature flag if VMX is not fully enabled x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization x86/centaur: Use common IA32_FEAT_CTL MSR initialization x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked x86/intel: Initialize IA32_FEAT_CTL MSR at boot tools/x86: Sync msr-index.h from kernel sources selftests, kvm: Replace manual MSR defs with common msr-index.h ...
2020-01-28selftests/ftrace: fix glob selftestSven Schnelle1-1/+1
test.d/ftrace/func-filter-glob.tc is failing on s390 because it has ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual __raw_spin_lock symbol isn't in the ftrace function list. Change '*aw*lock' to '*spin*lock' which would hopefully match some of the locking functions on all platforms. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-28Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds6-79/+63
Pull RCU updates from Ingo Molnar: "The RCU changes in this cycle were: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) rcu: Remove unused stop-machine #include powerpc: Remove comment about read_barrier_depends() .mailmap: Add entries for old paulmck@kernel.org addresses srcu: Apply *_ONCE() to ->srcu_last_gp_end rcu: Switch force_qs_rnp() to for_each_leaf_node_cpu_mask() rcu: Move rcu_{expedited,normal} definitions into rcupdate.h rcu: Move gp_state_names[] and gp_state_getname() to tree_stall.h rcu: Remove the declaration of call_rcu() in tree.h rcu: Fix tracepoint tracking RCU CPU kthread utilization rcu: Fix harmless omission of "CONFIG_" from #if condition rcu: Avoid tick_dep_set_cpu() misordering rcu: Provide wrappers for uses of ->rcu_read_lock_nesting rcu: Use READ_ONCE() for ->expmask in rcu_read_unlock_special() rcu: Clear ->rcu_read_unlock_special only once rcu: Clear .exp_hint only when deferred quiescent state has been reported rcu: Rename some instance of CONFIG_PREEMPTION to CONFIG_PREEMPT_RCU rcu: Remove kfree_call_rcu_nobatch() rcu: Remove kfree_rcu() special casing and lazy-callback handling rcu: Add support for debug_objects debugging for kfree_rcu() rcu: Add multiple in-flight batches of kfree_rcu() work ...
2020-01-27Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds13-0/+1065
Pull timer updates from Thomas Gleixner: "The timekeeping and timers departement provides: - Time namespace support: If a container migrates from one host to another then it expects that clocks based on MONOTONIC and BOOTTIME are not subject to disruption. Due to different boot time and non-suspended runtime these clocks can differ significantly on two hosts, in the worst case time goes backwards which is a violation of the POSIX requirements. The time namespace addresses this problem. It allows to set offsets for clock MONOTONIC and BOOTTIME once after creation and before tasks are associated with the namespace. These offsets are taken into account by timers and timekeeping including the VDSO. Offsets for wall clock based clocks (REALTIME/TAI) are not provided by this mechanism. While in theory possible, the overhead and code complexity would be immense and not justified by the esoteric potential use cases which were discussed at Plumbers '18. The overhead for tasks in the root namespace (ie where host time offsets = 0) is in the noise and great effort was made to ensure that especially in the VDSO. If time namespace is disabled in the kernel configuration the code is compiled out. Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature and kept on for more than a year addressing review comments, finding better solutions. A pleasant experience. - Overhaul of the alarmtimer device dependency handling to ensure that the init/suspend/resume ordering is correct. - A new clocksource/event driver for Microchip PIT64 - Suspend/resume support for the Hyper-V clocksource - The usual pile of fixes, updates and improvements mostly in the driver code" * tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n alarmtimer: Use wakeup source from alarmtimer platform device alarmtimer: Make alarmtimer platform device child of RTC device alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality hrtimer: Add missing sparse annotation for __run_timer() lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres() MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources clocksource/drivers/timer-microchip-pit64b: Fix sparse warning clocksource/drivers/exynos_mct: Rename Exynos to lowercase clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access clocksource/drivers/timer-ti-dm: Switch to platform_get_irq clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource clocksource/drivers/bcm2835_timer: Fix memory leak of timer clocksource/drivers/cadence-ttc: Use ttc driver as platform driver clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds3-13/+4
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27selftests: settings: tests can be in subsubdirsMatthieu Baerts1-1/+1
Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") adds support for a new per-test-directory "settings" file. But this only works for tests not in a sub-subdirectories, e.g. - tools/testing/selftests/rtc (rtc) is OK, - tools/testing/selftests/net/mptcp (net/mptcp) is not. We have to increase the timeout for net/mptcp tests which are not upstreamed yet but this fix is valid for other tests if they need to add a "settings" file, see the full list with: tools/testing/selftests/*/*/**/Makefile Note that this patch changes the text header message printed at the end of the execution but this text is modified only for the tests that are in sub-subdirectories, e.g. ok 1 selftests: net/mptcp: mptcp_connect.sh Before we had: ok 1 selftests: mptcp: mptcp_connect.sh But showing the full target name is probably better, just in case a subsubdir has the same name as another one in another subdirectory. Fixes: 852c8cbf34d3 (selftests/kselftest/runner.sh: Add 45 second timeout per test) Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller10-24/+205
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-01-27 The following pull-request contains BPF updates for your *net-next* tree. We've added 20 non-merge commits during the last 5 day(s) which contain a total of 24 files changed, 433 insertions(+), 104 deletions(-). The main changes are: 1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa. 2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko. 3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer. 4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend. 5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi. 6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin. 7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov. 8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover. 9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27selftests/bpf: Add test based on port range for BPF flow dissectorYoshiki Komachi1-0/+14
Add a simple test to make sure that a filter based on specified port range classifies packets correctly. Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117070533.402240-3-komachi.yoshiki@gmail.com
2020-01-27selftests: netfilter: Introduce tests for sets with range concatenationStefano Brivio2-1/+1483
This test covers functionality and stability of the newly added nftables set implementation supporting concatenation of ranged fields. For some selected set expression types, test: - correctness, by checking that packets match or don't - concurrency, by attempting races between insertion, deletion, lookup - timeout feature, checking that packets don't match expired entries and (roughly) estimate matching rates, comparing to baselines for simple drop on netdev ingress hook and for hash and rbtrees sets. In order to send packets, this needs one of sendip, netcat or bash. To flood with traffic, iperf3, iperf and netperf are supported. For performance measurements, this relies on the sample pktgen script pktgen_bench_xmit_mode_netif_receive.sh. If none of the tools suitable for a given test are available, specific tests will be skipped. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-01-25selftest/bpf: Add test for allowed trampolines countJiri Olsa2-0/+133
There's limit of 40 programs tht can be attached to trampoline for one function. Adding test that tries to attach that many plus one extra that needs to fail. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200123161508.915203-4-jolsa@kernel.org
2020-01-26selftests/eeh: Bump EEH wait time to 60sOliver O'Halloran1-3/+7
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s. Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT). Reported-by: Steve Best <sbest@redhat.com> Suggested-by: Douglas Miller <dougmill@us.ibm.com> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
2020-01-25selftests: mlxsw: Add a TBF selftestPetr Machata8-0/+344
Add a test that runs traffic across a port throttled with TBF. The test checks that the observed throughput is within +-5% from the installed shaper. To allow checking both the software datapath and the offloaded one, make the test suitable for inclusion from driver-specific wrapper. Introduce such wrappers for mlxsw. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Allow reading TC rule byte countersPetr Machata1-1/+2
The function tc_rule_stats_get() fetches a packet counter of a given TC rule. Extend it to support byte counters as well by adding an optional argument with selector. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Add helpers for busywaitingPetr Machata1-0/+18
The function busywait() is handy as a safety-latched variant of a while loop. Many selftests deal specifically with counter values, and busywaiting on them is likely to be rather common (it is not quite common now, but busywait() has not been around for very long). To facilitate expressing simply what is tested, introduce two helpers: - until_counter_is(), which can be used as a predicate passed to busywait(), which holds when expression, which is itself passed as an argument to until_counter_is(), reaches a desired value. - busywait_for_counter(), which is useful for waiting until a given counter changes "by" (as opposed to "to") a certain amount. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: Move two functions from mlxsw's qos_lib to libPetr Machata2-24/+24
The function humanize() is used for converting value in bits/s to a human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing hardware-specific in that, so move the function to lib.sh. Similarly for the rate() function, which just does a bit of math to calculate a rate, given two counter values and a time interval. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcuIngo Molnar6-79/+63
Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org>