| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Similarly to a0d7da26ce86 ("libbpf: Fix call relocation offset calculation
bug"), relocations against global variables need to take into account
referenced symbol's st_value, which holds offset into a corresponding data
section (and, subsequently, offset into internal backing map). For static
variables this offset is always zero and data offset is completely described
by respective instruction's imm field.
Convert a bunch of selftests to global variables. Previously they were relying
on `static volatile` trick to ensure Clang doesn't inline static variables,
which with global variables is not necessary anymore.
Fixes: 393cdfbee809 ("libbpf: Support initialized global variables")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191127200651.1381348-1-andriin@fb.com
|
|
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
|
|
Pull livepatching updates from Petr Mladek:
- New API to track system state changes done be livepatch callbacks. It
helps to maintain compatibility between livepatches.
- Update Kconfig help text. ORC is another reliable unwinder.
- Disable generic selftest timeout. Livepatch selftests have their own
per-operation fine-grained timeouts.
* tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
x86/stacktrace: update kconfig help text for reliable unwinders
livepatch: Selftests of the API for tracking system state changes
livepatch: Documentation of the new API for tracking system state changes
livepatch: Allow to distinguish different version of system state changes
livepatch: Basic API to track system state changes
livepatch: Keep replaced patches until post_patch callback is called
selftests/livepatch: Disable the timeout
|
|
Pull cgroup updates from Tejun Heo:
"There are several notable changes here:
- Single thread migrating itself has been optimized so that it
doesn't need threadgroup rwsem anymore.
- Freezer optimization to avoid unnecessary frozen state changes.
- cgroup ID unification so that cgroup fs ino is the only unique ID
used for the cgroup and can be used to directly look up live
cgroups through filehandle interface on 64bit ino archs. On 32bit
archs, cgroup fs ino is still the only ID in use but it is only
unique when combined with gen.
- selftest and other changes"
* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
writeback: fix -Wformat compilation warnings
docs: cgroup: mm: Fix spelling of "list"
cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
cgroup: use cgrp->kn->id as the cgroup ID
kernfs: use 64bit inos if ino_t is 64bit
kernfs: implement custom exportfs ops and fid type
kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
kernfs: convert kernfs_node->id from union kernfs_node_id to u64
kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
netprio: use css ID instead of cgroup ID
writeback: use ino_t for inodes in tracepoints
kernfs: fix ino wrap-around detection
kselftests: cgroup: Avoid the reuse of fd after it is deallocated
cgroup: freezer: don't change task and cgroups status unnecessarily
cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
cgroup: remove cgroup_enable_task_cg_lists() optimization
cgroup: pids: use atomic64_t for pids->limit
selftests: cgroup: Run test_core under interfering stress
selftests: cgroup: Add task migration tests
...
|
|
Pull thread management updates from Christian Brauner:
- A pidfd's fdinfo file currently contains the field "Pid:\t<pid>"
where <pid> is the pid of the process in the pid namespace of the
procfs instance the fdinfo file for the pidfd was opened in.
The fdinfo file has now gained a new "NSpid:\t<ns-pid1>[\t<ns-pid2>[...]]"
field which lists the pids of the process in all child pid namespaces
provided the pid namespace of the procfs instance it is looked up
under has an ancestoral relationship with the pid namespace of the
process. If it does not 0 will be shown and no further pid namespaces
will be listed. Tests included. (Christian Kellner)
- If the process the pidfd references has already exited, print -1 for
the Pid and NSpid fields in the pidfd's fdinfo file. Tests included.
(me)
- Add CLONE_CLEAR_SIGHAND. This lets callers clear all signal handler
that are not SIG_DFL or SIG_IGN at process creation time. This
originated as a feature request from glibc to improve performance and
elimate races in their posix_spawn() implementation. Tests included.
(me)
- Add support for choosing a specific pid for a process with clone3().
This is the feature which was part of the thread update for v5.4 but
after a discussion at LPC in Lisbon we decided to delay it for one
more cycle in order to make the interface more generic. This has now
done. It is now possible to choose a specific pid in a whole pid
namespaces (sub)hierarchy instead of just one pid namespace. In order
to choose a specific pid the caller must have CAP_SYS_ADMIN in all
owning user namespaces of the target pid namespaces. Tests included.
(Adrian Reber)
- Test improvements and extensions. (Andrei Vagin, me)
* tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: skip if clone3() is ENOSYS
selftests/clone3: check that all pids are released on error paths
selftests/clone3: report a correct number of fails
selftests/clone3: flush stdout and stderr before clone3() and _exit()
selftests: add tests for clone3() with *set_tid
fork: extend clone3() to support setting a PID
selftests: add tests for clone3()
tests: test CLONE_CLEAR_SIGHAND
clone3: add CLONE_CLEAR_SIGHAND
pid: use pid_has_task() in pidfd_open()
exit: use pid_has_task() in do_wait()
pid: use pid_has_task() in __change_pid()
test: verify fdinfo for pidfd of reaped process
pidfd: check pid has attached task in fdinfo
pidfd: add tests for NSpid info in fdinfo
pidfd: add NSpid entries to fdinfo
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- data abort report and injection
- steal time support
- GICv4 performance improvements
- vgic ITS emulation fixes
- simplify FWB handling
- enable halt polling counters
- make the emulated timer PREEMPT_RT compliant
s390:
- small fixes and cleanups
- selftest improvements
- yield improvements
PPC:
- add capability to tell userspace whether we can single-step the
guest
- improve the allocation of XIVE virtual processor IDs
- rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
- minor cleanups and improvements.
x86:
- XSAVES support for AMD
- more accurate report of nested guest TSC to the nested hypervisor
- retpoline optimizations
- support for nested 5-level page tables
- PMU virtualization optimizations, and improved support for nested
PMU virtualization
- correct latching of INITs for nested virtualization
- IOAPIC optimization
- TSX_CTRL virtualization for more TAA happiness
- improved allocation and flushing of SEV ASIDs
- many bugfixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints
KVM: x86: Grab KVM's srcu lock when setting nested state
KVM: x86: Open code shared_msr_update() in its only caller
KVM: Fix jump label out_free_* in kvm_init()
KVM: x86: Remove a spurious export of a static function
KVM: x86: create mmu/ subdirectory
KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page
KVM: x86: remove set but not used variable 'called'
KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning
KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it
KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality
KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID
KVM: x86: do not modify masked bits of shared MSRs
KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT
KVM: x86: Unexport kvm_vcpu_reload_apic_access_page()
KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1
KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization
...
|
|
Pull arm64 updates from Catalin Marinas:
"Apart from the arm64-specific bits (core arch and perf, new arm64
selftests), it touches the generic cow_user_page() (reviewed by
Kirill) together with a macro for x86 to preserve the existing
behaviour on this architecture.
Summary:
- On ARMv8 CPUs without hardware updates of the access flag, avoid
failing cow_user_page() on PFN mappings if the pte is old. The
patches introduce an arch_faults_on_old_pte() macro, defined as
false on x86. When true, cow_user_page() makes the pte young before
attempting __copy_from_user_inatomic().
- Covert the synchronous exception handling paths in
arch/arm64/kernel/entry.S to C.
- FTRACE_WITH_REGS support for arm64.
- ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4
- Several kselftest cases specific to arm64, together with a
MAINTAINERS update for these files (moved to the ARM64 PORT entry).
- Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
instructions under certain conditions.
- Workaround for Cortex-A57 and A72 errata where the CPU may
speculatively execute an AT instruction and associate a VMID with
the wrong guest page tables (corrupting the TLB).
- Perf updates for arm64: additional PMU topologies on HiSilicon
platforms, support for CCN-512 interconnect, AXI ID filtering in
the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.
- GICv3 optimisation to avoid a heavy barrier when accessing the
ICC_PMR_EL1 register.
- ELF HWCAP documentation updates and clean-up.
- SMC calling convention conduit code clean-up.
- KASLR diagnostics printed during boot
- NVIDIA Carmel CPU added to the KPTI whitelist
- Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
stale macro, simplify calculation in __create_pgd_mapping(), typos.
- Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
endinanness to help with allmodconfig"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: Kconfig: add a choice for endianness
kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
arm64: kaslr: Check command line before looking for a seed
arm64: kaslr: Announce KASLR status on boot
kselftest: arm64: fake_sigreturn_misaligned_sp
kselftest: arm64: fake_sigreturn_bad_size
kselftest: arm64: fake_sigreturn_duplicated_fpsimd
kselftest: arm64: fake_sigreturn_missing_fpsimd
kselftest: arm64: fake_sigreturn_bad_size_for_magic0
kselftest: arm64: fake_sigreturn_bad_magic
kselftest: arm64: add helper get_current_context
kselftest: arm64: extend test_init functionalities
kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
kselftest: arm64: mangle_pstate_invalid_daif_bits
kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
kselftest: arm64: extend toplevel skeleton Makefile
drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
...
|
|
Pull kselftest KUnit support gtom Shuah Khan:
"This adds KUnit, a lightweight unit testing and mocking framework for
the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently
supported on UML and sub-systems can write unit tests and run them in
UML env. KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- proc sysctl test from Iurii Zaikin
- the 'list' doubly linked list test from David Gow
- ext4 tests for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide a
way to trigger KUnit tests from user-space"
* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
lib/list-test: add a test for the 'list' doubly linked list
ext4: add kunit test for decoding extended timestamps
Documentation: kunit: Fix verification command
kunit: Fix '--build_dir' option
kunit: fix failure to build without printk
MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
MAINTAINERS: add entry for KUnit the unit testing framework
Documentation: kunit: add documentation for KUnit
kunit: defconfig: add defconfigs for building KUnit tests
kunit: tool: add Python wrappers for running KUnit tests
kunit: test: add tests for KUnit managed resources
kunit: test: add the concept of assertions
kunit: test: add tests for kunit test abort
kunit: test: add support for test abort
objtool: add kunit_try_catch_throw to the noreturn list
kunit: test: add initial tests
lib: enable building KUnit in lib/
kunit: test: add the concept of expectations
kunit: test: add assertion printing library
...
|
|
Pull kselftest fixes from Shuah Khan:
"This consists of several fixes to tests and framework.
Masami Hiramatsu fixed several tests to build and run correctly on arm
and other 32bit architectures"
* tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: sync: Fix cast warnings on arm
selftests: net: Fix printf format warnings on arm
selftests: net: Use size_t and ssize_t for counting file size
selftests: vm: Build/Run 64bit tests only on 64bit arch
selftests: proc: Make va_max 1MB
kselftest: Fix NULL INSTALL_PATH for TARGETS runlist
selftests: Move kselftest_module.sh into kselftest/
selftests: gen_kselftest_tar.sh: Do not clobber kselftest/
selftests: breakpoints: Fix a typo of function name
selftests: Fix O= and KBUILD_OUTPUT handling for relative paths
|
|
|
|
For BPF_PROG_TYPE_TRACING, the bpf_prog's ctx is an array of u64.
This patch borrows the idea from BPF_CALL_x in filter.h to
convert a u64 to the arg type of the traced function.
The new BPF_TRACE_x has an arg to specify the return type of a bpf_prog.
It will be used in the future TCP-ops bpf_prog that may return "void".
The new macros are defined in the new header file "bpf_trace_helpers.h".
It is under selftests/bpf/ for now. It could be moved to libbpf later
after seeing more upcoming non-tracing use cases.
The tests are changed to use these new macros also. Hence,
the k[s]u8/16/32/64 are no longer needed and they are removed
from the bpf_helpers.h.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191123202504.1502696-1-kafai@fb.com
|
|
Add several BPF kselftest cases for tail calls which test the various
patch directions, and that multiple locations are patched in same and
different programs.
# ./test_progs -n 45
#45/1 tailcall_1:OK
#45/2 tailcall_2:OK
#45/3 tailcall_3:OK
#45/4 tailcall_4:OK
#45/5 tailcall_5:OK
#45 tailcalls:OK
Summary: 1/5 PASSED, 0 SKIPPED, 0 FAILED
I've also verified the JITed dump after each of the rewrite cases that
it matches expectations.
Also regular test_verifier suite passes fine which contains further tail
call tests:
# ./test_verifier
[...]
Summary: 1563 PASSED, 0 SKIPPED, 0 FAILED
Checked under JIT, interpreter and JIT + hardening.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/3d6cbecbeb171117dccfe153306e479798fb608d.1574452833.git.daniel@iogearbox.net
|
|
Add a test that benchmarks different ways of attaching BPF program to a kernel function.
Here are the results for 2.4Ghz x86 cpu on a kernel without mitigations:
$ ./test_progs -n 49 -v|grep events
task_rename base 2743K events per sec
task_rename kprobe 2419K events per sec
task_rename kretprobe 1876K events per sec
task_rename raw_tp 2578K events per sec
task_rename fentry 2710K events per sec
task_rename fexit 2685K events per sec
On a kernel with retpoline:
$ ./test_progs -n 49 -v|grep events
task_rename base 2401K events per sec
task_rename kprobe 1930K events per sec
task_rename kretprobe 1485K events per sec
task_rename raw_tp 2053K events per sec
task_rename fentry 2351K events per sec
task_rename fexit 2185K events per sec
All 5 approaches:
- kprobe/kretprobe in __set_task_comm()
- raw tracepoint in trace_task_rename()
- fentry/fexit in __set_task_comm()
are roughly equivalent.
__set_task_comm() by itself is quite fast, so any extra instructions add up.
Until BPF trampoline was introduced the fastest mechanism was raw tracepoint.
kprobe via ftrace was second best. kretprobe is slow due to trap. New
fentry/fexit methods via BPF trampoline are clearly the fastest and the
difference is more pronounced with retpoline on, since BPF trampoline doesn't
use indirect jumps.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191122011515.255371-1-ast@kernel.org
|
|
Three test cases are added.
Test 1: jmp32 'reg op imm'.
Test 2: jmp32 'reg op reg' where dst 'reg' has unknown constant
and src 'reg' has known constant
Test 3: jmp32 'reg op reg' where dst 'reg' has known constant
and src 'reg' has unknown constant
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191121170651.449096-1-yhs@fb.com
|
|
test_core_reloc_kernel.c selftest is the only CO-RE test that reads and
returns for validation calling thread's information (pid, tgid, comm). Thus it
has to make sure that only test_prog's invocations are honored.
Fixes: df36e621418b ("selftests/bpf: add CO-RE relocs testing setup")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191121175900.3486133-1-andriin@fb.com
|
|
Initialized global variables are no different in ELF from static variables,
and don't require any extra support from libbpf. But they are matching
semantics of global data (backed by BPF maps) more closely, preventing
LLVM/Clang from aggressively inlining constant values and not requiring
volatile incantations to prevent those. This patch enables global variables.
It still disables uninitialized variables, which will be put into special COM
(common) ELF section, because BPF doesn't allow uninitialized data to be
accessed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191121070743.1309473-5-andriin@fb.com
|
|
Add -mattr=dwarfris attribute to llc to avoid having relocations against DWARF
data. These relocations make it impossible to inspect DWARF contents: all
strings are invalid.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191121070743.1309473-2-andriin@fb.com
|
|
Add exra level of verboseness, activated by -vvv argument. When -vv is
specified, verbose libbpf and verifier log (level 1) is output, even for
successful tests. With -vvv, verifier log goes to level 2.
This is extremely useful to debug verifier failures, as well as just see the
state and flow of verification. Before this, you'd have to go and modify
load_program()'s source code inside libbpf to specify extra log_level flags,
which is suboptimal to say the least.
Currently -vv and -vvv triggering verifier output is integrated into
test_stub's bpf_prog_load as well as bpf_verif_scale.c tests.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191120003548.4159797-1-andriin@fb.com
|
|
If selftests are copied over to another machine/location
for execution the build test of bpftool will obviously
not work, since the sources are not copied.
Skip it if we can't find bpftool's Makefile.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191119105010.19189-3-quentin.monnet@netronome.com
|
|
The trap on EXIT is used to clean up any temporary directory left by the
build attempts. It is not needed when the user simply calls the script
with its --help option, and may not be needed either if we add checks
(e.g. on the availability of bpftool files) before the build attempts.
Let's move this trap and related variables lower down in the code, so
that we don't accidentally change the value returned from the script
on early exits at pre-checks.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105010.19189-2-quentin.monnet@netronome.com
|
|
Conflicts:
arch/x86/kvm/vmx/vmx.c
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-11-20
The following pull-request contains BPF updates for your *net-next* tree.
We've added 81 non-merge commits during the last 17 day(s) which contain
a total of 120 files changed, 4958 insertions(+), 1081 deletions(-).
There are 3 trivial conflicts, resolve it by always taking the chunk from
196e8ca74886c433:
<<<<<<< HEAD
=======
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
void *bpf_map_area_alloc(u64 size, int numa_node)
=======
static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
<<<<<<< HEAD
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
=======
/* kmalloc()'ed memory can't be mmap()'ed */
if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
>>>>>>> 196e8ca74886c433dcfc64a809707074b936aaf5
The main changes are:
1) Addition of BPF trampoline which works as a bridge between kernel functions,
BPF programs and other BPF programs along with two new use cases: i) fentry/fexit
BPF programs for tracing with practically zero overhead to call into BPF (as
opposed to k[ret]probes) and ii) attachment of the former to networking related
programs to see input/output of networking programs (covering xdpdump use case),
from Alexei Starovoitov.
2) BPF array map mmap support and use in libbpf for global data maps; also a big
batch of libbpf improvements, among others, support for reading bitfields in a
relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko.
3) Extend s390x JIT with usage of relative long jumps and loads in order to lift
the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich.
4) Add BPF audit support and emit messages upon successful prog load and unload in
order to have a timeline of events, from Daniel Borkmann and Jiri Olsa.
5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode
(XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson.
6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API
call named bpf_get_link_xdp_info() for retrieving the full set of prog
IDs attached to XDP, from Toke Høiland-Jørgensen.
7) Add BTF support for array of int, array of struct and multidimensional arrays
and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau.
8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo.
9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid
xdping to be run as standalone, from Jiri Benc.
10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song.
11) Fix a memory leak in BPF fentry test run data, from Colin Ian King.
12) Various smaller misc cleanups and improvements mostly all over BPF selftests and
samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the most recent Clang, alu32 is enabled by default if -mcpu=probe or
-mcpu=v3 is specified. Use a separate build rule with -mcpu=v2 to enforce no
ALU32 mode.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191120002510.4130605-1-andriin@fb.com
|
|
When relocating subprogram call, libbpf doesn't take into account
relo->text_off, which comes from symbol's value. This generally works fine for
subprograms implemented as static functions, but breaks for global functions.
Taking a simplified test_pkt_access.c as an example:
__attribute__ ((noinline))
static int test_pkt_access_subprog1(volatile struct __sk_buff *skb)
{
return skb->len * 2;
}
__attribute__ ((noinline))
static int test_pkt_access_subprog2(int val, volatile struct __sk_buff *skb)
{
return skb->len + val;
}
SEC("classifier/test_pkt_access")
int test_pkt_access(struct __sk_buff *skb)
{
if (test_pkt_access_subprog1(skb) != skb->len * 2)
return TC_ACT_SHOT;
if (test_pkt_access_subprog2(2, skb) != skb->len + 2)
return TC_ACT_SHOT;
return TC_ACT_UNSPEC;
}
When compiled, we get two relocations, pointing to '.text' symbol. .text has
st_value set to 0 (it points to the beginning of .text section):
0000000000000008 000000050000000a R_BPF_64_32 0000000000000000 .text
0000000000000040 000000050000000a R_BPF_64_32 0000000000000000 .text
test_pkt_access_subprog1 and test_pkt_access_subprog2 offsets (targets of two
calls) are encoded within call instruction's imm32 part as -1 and 2,
respectively:
0000000000000000 test_pkt_access_subprog1:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
1: 64 00 00 00 01 00 00 00 w0 <<= 1
2: 95 00 00 00 00 00 00 00 exit
0000000000000018 test_pkt_access_subprog2:
3: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
4: 04 00 00 00 02 00 00 00 w0 += 2
5: 95 00 00 00 00 00 00 00 exit
0000000000000000 test_pkt_access:
0: bf 16 00 00 00 00 00 00 r6 = r1
===> 1: 85 10 00 00 ff ff ff ff call -1
2: bc 01 00 00 00 00 00 00 w1 = w0
3: b4 00 00 00 02 00 00 00 w0 = 2
4: 61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
5: 64 02 00 00 01 00 00 00 w2 <<= 1
6: 5e 21 08 00 00 00 00 00 if w1 != w2 goto +8 <LBB0_3>
7: bf 61 00 00 00 00 00 00 r1 = r6
===> 8: 85 10 00 00 02 00 00 00 call 2
9: bc 01 00 00 00 00 00 00 w1 = w0
10: 61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
11: 04 02 00 00 02 00 00 00 w2 += 2
12: b4 00 00 00 ff ff ff ff w0 = -1
13: 1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB0_3>
14: b4 00 00 00 02 00 00 00 w0 = 2
0000000000000078 LBB0_3:
15: 95 00 00 00 00 00 00 00 exit
Now, if we compile example with global functions, the setup changes.
Relocations are now against specifically test_pkt_access_subprog1 and
test_pkt_access_subprog2 symbols, with test_pkt_access_subprog2 pointing 24
bytes into its respective section (.text), i.e., 3 instructions in:
0000000000000008 000000070000000a R_BPF_64_32 0000000000000000 test_pkt_access_subprog1
0000000000000048 000000080000000a R_BPF_64_32 0000000000000018 test_pkt_access_subprog2
Calls instructions now encode offsets relative to function symbols and are both
set ot -1:
0000000000000000 test_pkt_access_subprog1:
0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
1: 64 00 00 00 01 00 00 00 w0 <<= 1
2: 95 00 00 00 00 00 00 00 exit
0000000000000018 test_pkt_access_subprog2:
3: 61 20 00 00 00 00 00 00 r0 = *(u32 *)(r2 + 0)
4: 0c 10 00 00 00 00 00 00 w0 += w1
5: 95 00 00 00 00 00 00 00 exit
0000000000000000 test_pkt_access:
0: bf 16 00 00 00 00 00 00 r6 = r1
===> 1: 85 10 00 00 ff ff ff ff call -1
2: bc 01 00 00 00 00 00 00 w1 = w0
3: b4 00 00 00 02 00 00 00 w0 = 2
4: 61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
5: 64 02 00 00 01 00 00 00 w2 <<= 1
6: 5e 21 09 00 00 00 00 00 if w1 != w2 goto +9 <LBB2_3>
7: b4 01 00 00 02 00 00 00 w1 = 2
8: bf 62 00 00 00 00 00 00 r2 = r6
===> 9: 85 10 00 00 ff ff ff ff call -1
10: bc 01 00 00 00 00 00 00 w1 = w0
11: 61 62 00 00 00 00 00 00 r2 = *(u32 *)(r6 + 0)
12: 04 02 00 00 02 00 00 00 w2 += 2
13: b4 00 00 00 ff ff ff ff w0 = -1
14: 1e 21 01 00 00 00 00 00 if w1 == w2 goto +1 <LBB2_3>
15: b4 00 00 00 02 00 00 00 w0 = 2
0000000000000080 LBB2_3:
16: 95 00 00 00 00 00 00 00 exit
Thus the right formula to calculate target call offset after relocation should
take into account relocation's target symbol value (offset within section),
call instruction's imm32 offset, and (subtracting, to get relative instruction
offset) instruction index of call instruction itself. All that is shifted by
number of instructions in main program, given all sub-programs are copied over
after main program.
Convert few selftests relying on bpf-to-bpf calls to use global functions
instead of static ones.
Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191119224447.3781271-1-andriin@fb.com
|
|
Check configurations and packets transference with different variations
of autoneg and speed.
Test plan:
1. Test force of same speed with autoneg off
2. Test force of different speeds with autoneg off (should fail)
3. One side is autoneg on and other side sets force of common speeds
4. One side is autoneg on and other side only advertises a subset of the
common speeds (one speed of the subset)
5. One side is autoneg on and other side only advertises a subset of the
common speeds. Check that highest speed is negotiated
6. Test autoneg on, but each side advertises different speeds (should
fail)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function that waits for device with maximum number of iterations.
It enables to limit the waiting and prevent infinite loop.
This will be used by the subsequent patch which will set two ports to
different speeds in order to make sure they cannot negotiate a link.
Waiting for all the setup is limited with 10 minutes for each device.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Functions:
1. speeds_arr_get
The function returns an array of speed values from
/usr/include/linux/ethtool.h The array looks as follows:
[10baseT/Half] = 0,
[10baseT/Full] = 1,
...
2. ethtool_set:
params: cmd
The function runs ethtool by cmd (ethtool -s cmd) and checks if
there was an error in configuration
3. dev_speeds_get:
params: dev, with_mode (0 or 1), adver (0 or 1)
return value: Array of supported/Advertised link modes
with/without mode
* Example 1:
speeds_get swp1 0 0
return: 1000 10000 40000
* Example 2:
speeds_get swp1 1 1
return: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full
4. common_speeds_get:
params: dev1, dev2, with_mode (0 or 1), adver (0 or 1)
return value: Array of common speeds of dev1 and dev2
* Example:
common_speeds_get swp1 swp2 0 0
return: 1000 10000
Assuming that swp1 supports 1000 10000 40000 and swp2 supports
1000 10000
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The scale test for Spectrum-2 should only be invoked for Spectrum-2.
Skip the test otherwise.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Same as for Spectrum-1, test the ability to add the maximum number of
routes possible to the switch.
Invoke the test from the 'resource_scale' wrapper script.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:
infinite loop detected at insn 76
The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:
48: w3 = 100
49: *(u32 *)(r10 - 68) = r3
...
; if (tlv.type == SR6_TLV_PADDING) {
76: if w3 == 5 goto -18 <LBB0_19>
...
85: r1 = *(u32 *)(r10 - 68)
; for (int i = 0; i < 100; i++) {
86: w1 += -1
87: if w1 == 0 goto +5 <LBB0_20>
88: *(u32 *)(r10 - 68) = r1
The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".
Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:
w3 = 100
R3_w=inv100 fp-64_w=inv1086626730498
*(u32 *)(r10 - 68) = r3
R3_w=inv100 fp-64_w=inv1086626730498
...
r1 = *(u32 *)(r10 - 68)
R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
fp-64=inv1086626730498
To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".
Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
|
|
When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.
For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.
Ensure a remaining server is terminated on cleanup.
Fixes: f6ad6accaa99 ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
|
|
The actual test to run is test_xdping.sh, which is already in TEST_PROGS.
The xdping program alone is not runnable with 'make run_tests', it
immediatelly fails due to missing arguments.
Move xdping to TEST_GEN_PROGS_EXTENDED in order to be built but not run.
Fixes: cd5385029f1d ("selftests/bpf: measure RTT from xdp using xdping")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/4365c81198f62521344c2215909634407184387e.1573821726.git.jbenc@redhat.com
|
|
KVM: s390: small fixes and enhancements
- selftest improvements
- yield improvements
- cleanups
|
|
Add selftests validating mmap()-ing BPF array maps: both single-element and
multi-element ones. Check that plain bpf_map_update_elem() and
bpf_map_lookup_elem() work correctly with memory-mapped array. Also convert
CO-RE relocation tests to use memory-mapped views of global data.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-6-andriin@fb.com
|
|
If the clone3() syscall is not implemented we should skip the tests.
Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid")
Fixes: 17a810699c18 ("selftests: add tests for clone3()")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
This is a regression test case for an issue when pids have not been
released on error paths.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-3-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
In clone3_set_tid, a few test cases are running in a child process. And
right now, if one of these test cases fails, the whole test will exit
with the success status.
Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-2-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Buffers have to be flushed before clone3() to avoid double messages in
the log.
Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-1-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Lots of overlapping changes and parallel additions, stuff
like that.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
|
|
tcp_mmap is used as a reference program for TCP rx zerocopy,
so it is important to point out some potential issues.
If multiple threads are concurrently using getsockopt(...
TCP_ZEROCOPY_RECEIVE), there is a chance the low-level mm
functions compete on shared ptl lock, if vma are arbitrary placed.
Instead of letting the mm layer place the chunks back to back,
this patch enforces an alignment so that each thread uses
a different ptl lock.
Performance measured on a 100 Gbit NIC, with 8 tcp_mmap clients
launched at the same time :
$ for f in {1..8}; do ./tcp_mmap -H 2002:a05:6608:290:: & done
In the following run, we reproduce the old behavior by requesting no alignment :
$ tcp_mmap -sz -C $((128*1024)) -a 4096
received 32768 MB (100 % mmap'ed) in 9.69532 s, 28.3516 Gbit
cpu usage user:0.08634 sys:3.86258, 120.511 usec per MB, 171839 c-switches
received 32768 MB (100 % mmap'ed) in 25.4719 s, 10.7914 Gbit
cpu usage user:0.055268 sys:21.5633, 659.745 usec per MB, 9065 c-switches
received 32768 MB (100 % mmap'ed) in 28.5419 s, 9.63069 Gbit
cpu usage user:0.057401 sys:23.8761, 730.392 usec per MB, 14987 c-switches
received 32768 MB (100 % mmap'ed) in 28.655 s, 9.59268 Gbit
cpu usage user:0.059689 sys:23.8087, 728.406 usec per MB, 18509 c-switches
received 32768 MB (100 % mmap'ed) in 28.7808 s, 9.55074 Gbit
cpu usage user:0.066042 sys:23.4632, 718.056 usec per MB, 24702 c-switches
received 32768 MB (100 % mmap'ed) in 28.8259 s, 9.5358 Gbit
cpu usage user:0.056547 sys:23.6628, 723.858 usec per MB, 23518 c-switches
received 32768 MB (100 % mmap'ed) in 28.8808 s, 9.51767 Gbit
cpu usage user:0.059357 sys:23.8515, 729.703 usec per MB, 14691 c-switches
received 32768 MB (100 % mmap'ed) in 28.8879 s, 9.51534 Gbit
cpu usage user:0.047115 sys:23.7349, 725.769 usec per MB, 21773 c-switches
New behavior (automatic alignment based on Hugepagesize),
we can see the system overhead being dramatically reduced.
$ tcp_mmap -sz -C $((128*1024))
received 32768 MB (100 % mmap'ed) in 13.5339 s, 20.3103 Gbit
cpu usage user:0.122644 sys:3.4125, 107.884 usec per MB, 168567 c-switches
received 32768 MB (100 % mmap'ed) in 16.0335 s, 17.1439 Gbit
cpu usage user:0.132428 sys:3.55752, 112.608 usec per MB, 188557 c-switches
received 32768 MB (100 % mmap'ed) in 17.5506 s, 15.6621 Gbit
cpu usage user:0.155405 sys:3.24889, 103.891 usec per MB, 226652 c-switches
received 32768 MB (100 % mmap'ed) in 19.1924 s, 14.3222 Gbit
cpu usage user:0.135352 sys:3.35583, 106.542 usec per MB, 207404 c-switches
received 32768 MB (100 % mmap'ed) in 22.3649 s, 12.2906 Gbit
cpu usage user:0.142429 sys:3.53187, 112.131 usec per MB, 250225 c-switches
received 32768 MB (100 % mmap'ed) in 22.5336 s, 12.1986 Gbit
cpu usage user:0.140654 sys:3.61971, 114.757 usec per MB, 253754 c-switches
received 32768 MB (100 % mmap'ed) in 22.5483 s, 12.1906 Gbit
cpu usage user:0.134035 sys:3.55952, 112.718 usec per MB, 252997 c-switches
received 32768 MB (100 % mmap'ed) in 22.6442 s, 12.139 Gbit
cpu usage user:0.126173 sys:3.71251, 117.147 usec per MB, 253728 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This tests clone3() with *set_tid to see if all desired PIDs are working
as expected. The tests are trying multiple invalid input parameters as
well as creating processes while specifying a certain PID in multiple
PID namespaces at the same time.
Additionally this moves common clone3() test code into clone3_selftests.h.
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191115123621.142252-2-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Add a test that attaches one FEXIT program to main sched_cls networking program
and two other FEXIT programs to subprograms. All three tracing programs
access return values and skb->len of networking program and subprograms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-21-ast@kernel.org
|
|
The test_pkt_access.o is used by multiple tests. Fix its section name so that
program type can be automatically detected by libbpf and make it call other
subprograms with skb argument.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-20-ast@kernel.org
|
|
Add stress test for maximum number of attached BPF programs per BPF trampoline.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-13-ast@kernel.org
|
|
Add a combined fentry/fexit test.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-12-ast@kernel.org
|
|
Add fexit tests for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes and their return values.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-11-ast@kernel.org
|
|
Add sanity test for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-10-ast@kernel.org
|
|
Add simple test for fentry and fexit programs around eth_type_trans.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-8-ast@kernel.org
|
|
Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
Andrii Nakryiko
Linus Torvalds
Petr Mladek
Martin KaFai Lau
Daniel Borkmann
Alexei Starovoitov
Yonghong Song
Jakub Kicinski
Quentin Monnet
Paolo Bonzini
David S. Miller
Amit Cohen
Danielle Ratson
Jiri Benc
Christian Brauner
Andrei Vagin
Eric Dumazet
Adrian Reber
Richard Cochran