aboutsummaryrefslogtreecommitdiffstats
path: root/tools/testing (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26ktest: Set CLOSE_CONSOLE_SIGNAL in the kvm.confSatoru Takeuchi1-0/+4
As mentioned at commit 5a5d8e48449, we can't terminate 'virsh console' with the default signal(INT). So it's better to set CLOSE_CONSOLE_SIGNAL in the kvm.conf. Link: http://lkml.kernel.org/r/8738jatylb.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> [ Typo fixed by ] Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-23test: check copy_to/from_user boundary validationKees Cook2-0/+14
To help avoid an architecture failing to correctly check kernel/user boundaries when handling copy_to_user, copy_from_user, put_user, or get_user, perform some simple tests and fail to load if any of them behave unexpectedly. Specifically, this is to make sure there is a way to notice if things like what was fixed in commit 8404663f81d2 ("ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS") ever regresses again, for any architecture. Additionally, adds new "user" selftest target, which loads this module. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-18ktest: Add BISECT_TRIES to bisect testSteven Rostedt (Red Hat)2-2/+36
For those cases that it takes several tries to hit a bug, it would be useful for ktest.pl to try a test multiple times before it considers the test as a pass. To accomplish this, BISECT_TRIES ktest config option has been added. It is default to one, as most of the time a bisect only needs to try a test once. But the user can now up this to make ktest run a given test multiple times. The first failure that is detected will set a bisect bad. It only repeats on success. Note, as with all race bugs, there's no guarantee that if it succeeds, it is really a good bisect. But it helps in case the bug is somewhat reliable. You can set BISECT_TRIES to zero, and all tests will be considered good, unless you also set BISECT_MANUAL. Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add eval '=~' command to modify variables in config fileSteven Rostedt (Red Hat)1-21/+81
With the added variable ${KERNEL_VERSION}, it is useful to be able to use parts of it for other variables. For example, if you want to create a warnings file for each major kernel version to test sub versions against you can create your warnings file with like this: WARNINGS_FILE = warnings-file-${KERNEL_VERSION} But this may add 3.8.12 or something, and we want all 3.8.* to use the same file, and 3.10.* to use another file, and so on. With the eval command we can, by adding: WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/ Which will chop off the extra characters after the 3.8. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-11ktest: Add special variable ${KERNEL_VERSION}Steven Rostedt (Red Hat)1-8/+19
Add a special variable that can be used in other variables called ${KERNEL_VERSION}. This will embed the current kernel version into the variable. For example: WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION} If the current version is v3.8 then the WARNINGS_FILE will become ${OUTPUT_DIR}/warnings-v3.8 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03rcutorture: Stop tracking FSF's postal addressPaul E. McKenney17-32/+50
All of the rcutorture scripts has the usual GPL header, which contains a long-obsolete postal address for FSF. To avoid the need to track the FSF office's movements, this commit substitutes the URL where GPL may be found. Reported-by: Greg KH <gregkh@linuxfoundation.org> Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-12-03rcutorture: Move checkarg to functions.shPaul E. McKenney2-22/+27
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Flag errors and warnings with color codingPaul E. McKenney5-12/+41
The output of the rcutorture scripts often requires interpretation, so this commit simplifies this interpretation by tagging messages as BUGs (colored red) or WARNINGs (colored yellow). Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Record results from repeated runs of the same test scenarioPaul E. McKenney1-1/+15
Repeatedly running a given test, for example, by repeating the name as in "--configs "TREE08 TREE08 TREE08" records the results only of the last run of this test. This is because the earlier results are overwritten by the later results. This commit therefore checks for earlier results, using numbered file extensions to distinguish multiple runs. The earlier example would therefore create directories TREE01, TREE01.2, and TREE01.3. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Test summary at end of run with less chattinessPaul E. McKenney2-1/+4
The commit causes kvm.sh to invoke kvm-recheck.sh at the end of each run, and causes kvm-recheck.sh to print only the name of the test, not the full path to the corresponding Kconfig file. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Update comment in kvm.sh listing typical RCU trace eventsPaul E. McKenney1-1/+1
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add tracing-enabled version of TREE08Paul E. McKenney1-0/+26
The TREE08 Kconfig fragment does not enable tracing, which is appropriate for its test case. However, this can be inconvenient in cases where TREE08 locates RCU bugs. This commit therefore adds a TREE08-T that differs from TREE08 only in enabling CONFIG_RCU_TRACE. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add --kmake-arg argument to kvm.shPaul E. McKenney2-1/+8
This commit adds the --kmake-arg to kvm.sh, which allows passing in things like "V=1" to see the build commands, as well as enabling the CROSS_COMPILE= make macro used for cross-building. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add --no-initrd argument to kvm.shPaul E. McKenney2-3/+8
This commit adds the --no-initrd argument to kvm.sh, which permits initrd to be contained in a root partition specified by the --bootargs argument. Without --no-initrd, the kernel build expects an initrd directory in the same rcutorture directory that contains bin and configs. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add --qemu-args argument to kvm.shPaul E. McKenney1-5/+11
This commits adds the --qemu-args argument to kvm.sh that is required to pass boot devices down through to qemu. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add --bootargs argument to specify additional boot argumentsPaul E. McKenney1-1/+7
This commit allows easy specification of trace_event lists, among other things. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add --buildonly dry-run capabilityPaul E. McKenney2-0/+9
This commit adds --buildonly, which does the builds specified by the --configs argument, but does not boot or test the resulting kernels. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Eliminate configdir argument from kvm-recheck.sh scriptPaul E. McKenney1-4/+2
Don't grab the configuration fragment from the configs directory because it might well have been changed since the test was run. Instead, use the ConfigFragment file that was placed in the results directory. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Allow Kconfig-related boot parameters to overridePaul E. McKenney1-4/+6
As it stands, the default kernel boot parameters generated from the Kconfig fragment will override any supplied with the .boot file that can optionally accompany a Kconfig fragment. Rearrange ordering to permit the specific .boot arguments to override those generated by analyzing the Kconfig fragment. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Refactor to enable non-x86 architecturesPaul E. McKenney3-13/+102
This commit expands the checks for what architecture is running to generate additional qemu-system- commands, then uses the resulting qemu-system- command name to choose different qemu arguments as needed for different architectures. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Eliminate --rcu-kvm argumentPaul E. McKenney1-14/+1
The --rcu-kvm argument was intended to allow the scripts to live in an alternate location. Unfortunately, this prevents the kvm.sh script from using common functions until after it finished parsing arguments, because it doesn't know where to find them until then. However, "cp -a" and "ln -s" work pretty well, so lack of an --rcu-kvm argument can be easily worked around. This commit therefore removes this argument. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Remove decorative qemu argumentPaul E. McKenney1-1/+1
The qemu -name argument doesn't seem to be useful in this environment, so this commit removes it. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Abstract qemu-flavor identificationPaul E. McKenney3-6/+36
The task of working out which flavor of qemu to use gets more complex as more types of CPUs are supported. Adding Power makes three in addition to 32-bit and 64-bit x86, so it is time to pull this out into a function. This commit therefore creates an identify_qemu function and also adds a --qemu-cmd command-line argument for the inevitable case where the identify_qemu cannot figure it out. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Eliminate duplicate .config-check codePaul E. McKenney1-26/+1
The commit uses configcheck.sh from within configinit.sh, replacing the imperfect inline expansion that was there before. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Make test output less chattyPaul E. McKenney3-13/+16
This commit drops no-longer-needed diagnostics from the output. Some of them are retained in logfiles, in case they are ever needed. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Refactor TINY_RCU test casesPaul E. McKenney8-90/+68
The TINY_RCU test cases were first put in place many years ago, and have been incrementally modified rather than being reworked. This commit therefore completes a long-overdue reworking of the TINY_RCU test cases. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Refactor TREE_RCU test casesPaul E. McKenney34-480/+328
The TREE_RCU test cases were first put in place many years ago, and have been incrementally modified rather than being reworked. This commit therefore completes a long-overdue reworking of the TREE_RCU test cases. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add SRCU Kconfig-fragment filesPaul E. McKenney4-0/+18
Use .boot facility to ease inclusion of SRCU into automated testing. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add v3.12 version, which adds sysidle testingPaul E. McKenney23-0/+521
The v3.12 version of the kernel added the CONFIG_NO_HZ_FULL_SYSIDLE Kconfig parameter, so this commit adds a version transition at that point. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add per-Kconfig fragment boot parametersPaul E. McKenney2-0/+14
Some Kconfig fragments require rcutorture module parameters to do optimal testing, for example, a configuration for SRCU would need rcutorture.torture_type=srcu. This commit therefore adds a per-Kconfig-fragment boot-parameter capability. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add per-version default Kconfig fragments and module parametersPaul E. McKenney13-32/+242
Different Kconfig parameters apply to different kernel versions, as do different rcutorture module parameters. This commit allows the rcutorture test scripts to adjust for different kernel versions. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add kernel-version argumentPaul E. McKenney44-1/+906
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add datestamp argument to kvm.shPaul E. McKenney1-5/+11
Allow datestamp to be specified to allow tests to be broken up and run in parallel. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03rcutorture: Add KVM-based test frameworkPaul E. McKenney40-0/+1650
This commit adds the test framework that I used to test RCU under KVM. This consists of a group of scripts and Kconfig fragments. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Greg KH <gregkh@linuxfoundation.org>
2013-12-03ktest: Add documentation of CLOSE_CONSOLE_SIGNALSteven Rostedt (Red Hat)1-0/+7
The sample.conf file needs to document all available options. With the new CLOSE_CONSOE_SIGNAL option, it too needs to be document. Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-03ktest: Make the signal to terminate the console configurableSatoru Takeuchi1-1/+4
Currently ktest sends SIGINT to terminate the console. However, there are consoles which do not exit by this signal, for example, in my case, "virsh console <guest OS>". In such case, ktest is blocked in close_console(). It prevents this automate test. This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the signal to terminate the console. Since its default value is "INT", the original behavior isn't changed. Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-16tools/testing/selftests: fix uninitialized variableFelipe Pena1-1/+1
The err variable is intended to receive the timer_create() return before checking it Signed-off-by: Felipe Pena <felipensp@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-16Drop support for Renesas H8/300 (h8300) architectureGuenter Roeck1-6/+0
H8/300 has been dead for several years, and the kernel for it has not compiled for ages. Drop support for it. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-14selftests: Add test of PMU instruction counting on powerpcMichael Ellerman6-1/+349
This commit adds a test of instruction counting using the PMU on powerpc. Although the bulk of the code is architecture agnostic, the code needs to run a precisely sized loop which is implemented in assembler. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14selftests: Add support files for powerpc testsMichael Ellerman3-0/+186
This commit adds support code used by upcoming powerpc tests. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14selftests: Add infrastructure for powerpc selftestsMichael Ellerman2-0/+40
This commit adds a powerpc subdirectory to tools/testing/selftests, for tests that are powerpc specific. On other architectures nothing is built. The makefile supports cross compilation if the user sets ARCH and CROSS_COMPILE. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-03tools/testing/selftests: don't assume the x bit is set on scriptsAndrew Morton2-2/+2
The x bit can easily get lost (patch(1) loses it, for example). Reported-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: add .gitignore for kcmpRamkumar Ramachandra1-0/+2
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: fix clean target in kcmp MakefileRamkumar Ramachandra1-2/+1
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: add .gitignore for vmRamkumar Ramachandra1-0/+4
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: add hugetlbfstestJoern Engel3-1/+96
As the confusing naming indicates, this test has some overlap with pre-existing tests. Would be nice to merge them eventually. But since it is only test code, cleanliness is much less important than mere existence. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03self-test: fix make cleanJoern Engel1-2/+3
thuge-gen was forgotten. Fix it by removing the duplication, so we don't get too many repeats. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: exit 1 on failureJoern Engel2-1/+6
In case this ever gets scripted, it should return 0 on success and 1 on failure. Parsing the output should be left to meatbags. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03selftests: add basic posix timers selftestsFrederic Weisbecker3-0/+230
Add some initial basic tests on a few posix timers interface such as setitimer() and timer_settime(). These simply check that expiration happens in a reasonable timeframe after expected elapsed clock time (user time, user + system time, real time, ...). This is helpful for finding basic breakages while hacking on this subsystem. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Olivier Langlois <olivier@trillion01.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2013-07-02tools: selftests: psock_tpacket: get rid of macro wrappersDaniel Borkmann1-39/+20
The TPACKET_V3 test code consists of a lot of unecessary macro wrappers that rather obfuscate what members are accessed in what way. So get rid of them and make the code more readable. Also credit Chetan for providing tpacket_v3 example code. Furthermore, get rid of private offset usage, as we do not need it here. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>