Age | Commit message (Collapse) | Author | Files | Lines |
|
Since sub-testing can now be detected by indentation level, this removes
KSFT_TAP_LEVEL so that subtests report their TAP header for later parsing.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This changes the selftest output so that each test's output is prefixed
with "# " as a TAP "diagnostic line".
This creates a bit of a kernel-specific TAP dialect where the diagnostics
precede the results. The TAP spec isn't entirely clear about this, though,
so I think it's the correct solution so as to keep interactive runs making
sense. If the output _followed_ the result line in the spec-suggested
YAML form, each test would dump all of its output at once instead of as
it went, making debugging harder.
This does, however, solve the recursive TAP output problem, as sub-tests
will simply be prefixed by "# ". Parsing sub-tests becomes a simple
problem of just removing the first two characters of a given top-level
test's diagnostic output, and parsing the results.
Note that the shell construct needed to both get an exit code from
the first command in a pipe and still filter the pipe (to add the "# "
prefix) uses a POSIX solution rather than the bash "pipefail" option
which is not supported by dash.
Since some test environments may have a very minimal set of utilities
available, the new prefixing code will fall back to doing line-at-a-time
prefixing if perl and/or stdbuf are not available.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If a test was missing (e.g. wrong architecture, etc), the test runner
would incorrectly claim the test was non-executable. This adds an
existence check to report correctly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The TAP version 13 spec requires a "plan" line, which has been missing.
Since we always know how many tests we're going to run, emit the count on
the plan line. This also fixes the result lines to remove the "1.." prefix
which is against spec, and to mark skips with the correct "# SKIP" suffix.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This moves the logic for running multiple tests into a single "run_many"
function of runner.sh. Both "run_tests" and "emit_tests" are modified to
use it. Summary handling is now controlled by the "per_test_logging"
shell flag.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This reuses the new runner.sh for the emit targets instead of manually
running each test via run_kselftest.sh.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In order to improve the reusability of the kselftest test running logic,
this extracts the single-test logic from lib.mk into kselftest/runner.sh
which lib.mk can call directly. No changes in output.
As part of the change, this moves the "summary" Makefile logic around
to set a new "logfile" output. This will be used again in the future
"emit_tests" target as well.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Build and run gpio when output directory is the src dir. gpio has
dependency on tools/gpio and builds tools/gpio objects in the src
directory in all cases making the src repo dirty even when object
relocation is specified.
This fixes the following commands from generating gpio objects in
the source repository:
make O=dir kselftest
export KBUILD_OUTPUT=dir; make kselftest
make O=dir -C tools/testing/selftests
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests
The following commands still build gpio objects in the source repo
(gpio Makefile needs to fixed):
make O=dir kselftest TARGETS="gpio"
export KBUILD_OUTPUT=dir; make kselftest TARGETS="gpio"
make O=dir -C tools/testing/selftests TARGETS="gpio"
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests TARGETS="gpio"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This fixes the various compiler warnings when building the msgque
selftest. The primary change is using sys/msg.h instead of linux/msg.h
directly to gain the API declarations.
Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Test files created by test_create() and test_create_empty() tests will
stay in the $efivarfs_mount directory until the system was rebooted.
When the tester tries to run this efivarfs test again on the same
system, the immutable characteristics in that directory will cause some
"Operation not permitted" noises, and a false-positve test result as the
file was created in previous run.
--------------------
running test_create
--------------------
./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
running test_create_empty
--------------------
./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
Create a file_cleanup() to remove those test files in the end of each
test to solve this issue.
For the test_create_read, we can move the clean up task to the end of
the test to ensure the system is clean.
Also, use this function to replace the existing file removal code.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
"make kselftest" fails with "Circular Makefile.o <- prepare dependency
dropped." error, when lib.mk invokes "make headers_install".
Make level 0: Main make calls selftests run_tests target
...
Make level n: selftests lib.mk invokes main make's headers_install
The secondary level make inherits builtin-rules which will use the rule
to generate Makefile.o and runs into "Circular Makefile.o <- prepare
dependency dropped." error, and kselftest compile fails.
Invoke headers_install target with --no-builtin-rules to avoid circular
error.
In addition, lib.mk installs headers in the default HDR_PATH, even when
build relocation is requested with O= or export KBUILD_OUTPUT. Fix the
problem by passing in INSTALL_HDR_PATH. The headers are installed under
the specified output "dir/usr".
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The get_secureboot_mode() function unnecessarily requires both
CONFIG_EFIVAR_FS and CONFIG_EFI_VARS to be enabled to determine if the
system is booted in secure boot mode. On some systems the old EFI
variable support is not enabled or, possibly, even implemented.
This patch first checks the efivars filesystem for the SecureBoot and
SetupMode flags, but falls back to using the old EFI variable support.
The "secure_boot_file" and "setup_mode_file" couldn't be quoted due to
globbing. This patch also removes the globbing.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Verify IMA is enabled before failing tests or emitting irrelevant
messages.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Skip the kexec_load and kexec_file_load tests, if they aren't configured
in the kernel. This change adds a new requirement that ikconfig is
configured in the kexec_load test.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
so the file can be used as kernel config snippet.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
[zohar@linux.ibm.com: remove CONFIG_KEXEC_VERIFY_SIG from config]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kernel can be configured to verify PE signed kernel images, IMA
kernel image signatures, both types of signatures, or none. This test
verifies only properly signed kernel images are loaded into memory,
based on the kernel configuration and runtime policies.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Many tests require root privileges. Define a common function.
Suggested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Define log_info, log_pass, log_fail, and log_skip functions.
Suggested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Define, update and move get_secureboot_mode() to a common file for use
by other tests.
Updated to check both the efivar SecureBoot-$(UUID) and
SetupMode-$(UUID), based on Dave Young's review.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Remove the few bashisms and use the complete option name for clarity.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
As requested move the existing kexec_load selftest and subsequent kexec
tests to the selftests/kexec directory.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In order to keep tests from hanging forever, this adds an alarm signal
to each test run. This assumes an individual test doesn't take longer
than 30 seconds.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When running without USERNS or PIDNS the seccomp test would hang since
it was waiting forever for the child to trigger the user notification
since it seems the glibc() abort handler makes a call to getpid(),
which would trap again. This changes the getpid filter to getppid, and
makes sure ASSERTs execute to stop from spawning the listener.
Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org # > 5.0
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Dan reported, that cleanup path in test_memcg_subtree_control()
triggers a static checker warning:
./tools/testing/selftests/cgroup/test_memcontrol.c:76 \
test_memcg_subtree_control()
error: uninitialized symbol 'child2'.
Fix this by initializing child2 and parent2 variables and
split the cleanup path into few stages.
Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
After the first run, the test case 'test_create_read' will always
fail because the file is exist and file's attr is 'S_IMMUTABLE',
open with 'O_RDWR' will always return -EPERM.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
On smaller systems, running a test with 200 threads can take a long
time on machines with smaller number of CPUs.
Detect the number of online cpus at test runtime, and multiply that
by 6 to have 6 rseq threads per cpu preempting each other.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: linux-kselftest@vger.kernel.org
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Add a test module for the new strscpy_pad() function. Tie it into the
kselftest infrastructure for lib/ tests.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
kselftest runs as a userspace process. Sometimes we need to test things
from kernel space. One way of doing this is by creating a test module.
Currently doing so requires developers to write a bunch of boiler plate
in the module if kselftest is to be used to run the tests. This means
we currently have a load of duplicate code to achieve these ends. If we
have a uniform method for implementing test modules then we can reduce
code duplication, ensure uniformity in the test framework, ease code
maintenance, and reduce the work required to create tests. This all
helps to encourage developers to write and run tests.
Add a C header file that can be included in test modules. This provides
a single point for common test functions/macros. Implement a few macros
that make up the start of the test framework.
Add documentation for new kselftest header to kselftest documentation.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Currently if we wish to use kselftest to run tests within a kernel
module we write a small script to load/unload and do error reporting.
There are a bunch of these under tools/testing/selftests/lib/ that are
all identical except for the test name. We can reduce code duplication
and improve maintainability if we have one version of this. However
kselftest requires an executable for each test. We can move all the
script logic to a central script then have each individual test script
call the main script.
Oneliner to call kselftest_module.sh courtesy of Kees, thanks!
Add test runner creation script. Convert
tools/testing/selftests/lib/*.sh to use new test creation script.
Testing
-------
Configure kselftests for lib/ then build and boot kernel. Then run
kselftests as follows:
$ cd /path/to/kernel/tree
$ sudo make O=$output_path -C tools/testing/selftests TARGETS="lib" run_tests
and also
$ cd /path/to/kernel/tree
$ cd tools/testing/selftests
$ sudo make O=$output_path TARGETS="lib" run_tests
and also
$ cd /path/to/kernel/tree
$ cd tools/testing/selftests
$ sudo make TARGETS="lib" run_tests
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Remove duplicate header which are included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Remove duplicate header which is included twice
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Remove duplicate header which is included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Remove duplicate header which is included twice.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
Pull networking fixes from David Miller:
1) Several hash table refcount fixes in batman-adv, from Sven
Eckelmann.
2) Use after free in bpf_evict_inode(), from Daniel Borkmann.
3) Fix mdio bus registration in ixgbe, from Ivan Vecera.
4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.
5) ila rhashtable corruption fix from Herbert Xu.
6) Don't allow upper-devices to be added to vrf devices, from Sabrina
Dubroca.
7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.
8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
from Alexander Lobakin.
9) Missing IDR checks in mlx5 driver, from Aditya Pakki.
10) Fix false connection termination in ktls, from Jakub Kicinski.
11) Work around some ASPM issues with r8169 by disabling rx interrupt
coalescing on certain chips. From Heiner Kallweit.
12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
Abeni.
13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.
14) Various BPF flow dissector fixes from Stanislav Fomichev.
15) Divide by zero in act_sample, from Davide Caratti.
16) Fix bridging multicast regression introduced by rhashtable
conversion, from Nikolay Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
ibmvnic: Fix completion structure initialization
ipv6: sit: reset ip header pointer in ipip6_rcv
net: bridge: always clear mcast matching struct on reports and leaves
libcxgb: fix incorrect ppmax calculation
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
sch_cake: Make sure we can write the IP header before changing DSCP bits
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
tcp: Ensure DCTCP reacts to losses
net/sched: act_sample: fix divide by zero in the traffic path
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
net: hns: Fix sparse: some warnings in HNS drivers
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
net: hns: fix ICMP6 neighbor solicitation messages discard problem
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
net: hns: Use NAPI_POLL_WEIGHT for hns driver
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
flow_dissector: rst'ify documentation
ipv6: Fix dangling pointer when ipv6 fragment
net-gro: Fix GRO flush when receiving a GSO packet.
flow_dissector: document BPF flow dissector environment
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-04-04
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Batch of fixes to the existing BPF flow dissector API to support
calling BPF programs from the eth_get_headlen context (support for
latter is planned to be added in bpf-next), from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the control path of 'sample' action does not validate the value of 'rate'
provided by the user, but then it uses it as divisor in the traffic path.
Validate it in tcf_sample_init(), and return -EINVAL with a proper extack
message in case that value is zero, to fix a splat with the script below:
# tc f a dev test0 egress matchall action sample rate 0 group 1 index 2
# tc -s a s action sample
total acts 1
action order 0: sample rate 1/0 group 1 pipe
index 2 ref 1 bind 1 installed 19 sec used 19 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
# ping 192.0.2.1 -I test0 -c1 -q
divide error: 0000 [#1] SMP PTI
CPU: 1 PID: 6192 Comm: ping Not tainted 5.1.0-rc2.diag2+ #591
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_sample_act+0x9e/0x1e0 [act_sample]
Code: 6a f1 85 c0 74 0d 80 3d 83 1a 00 00 00 0f 84 9c 00 00 00 4d 85 e4 0f 84 85 00 00 00 e8 9b d7 9c f1 44 8b 8b e0 00 00 00 31 d2 <41> f7 f1 85 d2 75 70 f6 85 83 00 00 00 10 48 8b 45 10 8b 88 08 01
RSP: 0018:ffffae320190ba30 EFLAGS: 00010246
RAX: 00000000b0677d21 RBX: ffff8af1ed9ec000 RCX: 0000000059a9fe49
RDX: 0000000000000000 RSI: 000000000c7e33b7 RDI: ffff8af23daa0af0
RBP: ffff8af1ee11b200 R08: 0000000074fcaf7e R09: 0000000000000000
R10: 0000000000000050 R11: ffffffffb3088680 R12: ffff8af232307f80
R13: 0000000000000003 R14: ffff8af1ed9ec000 R15: 0000000000000000
FS: 00007fe9c6d2f740(0000) GS:ffff8af23da80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff6772f000 CR3: 00000000746a2004 CR4: 00000000001606e0
Call Trace:
tcf_action_exec+0x7c/0x1c0
tcf_classify+0x57/0x160
__dev_queue_xmit+0x3dc/0xd10
ip_finish_output2+0x257/0x6d0
ip_output+0x75/0x280
ip_send_skb+0x15/0x40
raw_sendmsg+0xae3/0x1410
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Add a TDC selftest to document that 'rate' is now being validated.
Reported-by: Matteo Croce <mcroce@redhat.com>
Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preparation for the next commit that would prohibit access to
the most fields of __sk_buff from the BPF programs.
Instead of requiring BPF flow dissector programs to look into skb,
pass all input data in the flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek
back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use
flow_keys->n_proto, that we set in parse_eth_proto instead and
properly increment nhoff as well.
Also, always use skb->protocol and don't look at skb->vlan_present.
skb->vlan_present indicates that vlan information is stored out-of-band
in skb->vlan_{tci,proto} and vlan header is already pulled from skb.
That means, skb->vlan_present == true is not relevant for BPF flow
dissector.
Add simple test cases with VLAN tagged frames:
* single vlan for ipv4
* double vlan for ipv6
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-03-29
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Bug fix in BTF deduplication that was mishandling an equivalence
comparison, from Andrii.
2) libbpf Makefile fixes to properly link against libelf for the shared
object and to actually export AF_XDP's xsk.h header, from Björn.
3) Fix use after free in bpf inode eviction, from Daniel.
4) Fix a bug in skb creation out of cpumap redirect, from Jesper.
5) Remove an unnecessary and triggerable WARN_ONCE() in max number
of call stack frames checking in verifier, from Paul.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation/virtual/kvm/api.txt states:
NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and
KVM_EXIT_EPR the corresponding operations are complete (and guest
state is consistent) only after userspace has re-entered the
kernel with KVM_RUN. The kernel side will first finish incomplete
operations and then check for pending signals. Userspace can
re-enter the guest with an unmasked signal pending to complete
pending operations.
Because guest state may be inconsistent, starting state migration after
an IO exit without first completing IO may result in test failures, e.g.
a proposed change to KVM's handling of %rip in its fast PIO handling[1]
will cause the new VM, i.e. the post-migration VM, to have its %rip set
to the IN instruction that triggered KVM_EXIT_IO, leading to a test
assertion due to a stage mismatch.
For simplicitly, require KVM_CAP_IMMEDIATE_EXIT to complete IO and skip
the test if it's not available. The addition of KVM_CAP_IMMEDIATE_EXIT
predates the state selftest by more than a year.
[1] https://patchwork.kernel.org/patch/10848545/
Fixes: fa3899add1056 ("kvm: selftests: add basic test for state save and restore")
Reported-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since 4.8.3, gcc has enabled -fstack-protector by default. This is
problematic for the KVM selftests as they do not configure fs or gs
segments (the stack canary is pulled from fs:0x28). With the default
behavior, gcc will insert a stack canary on any function that creates
buffers of 8 bytes or more. As a result, ucall() will hit a triple
fault shutdown due to reading a bad fs segment when inserting its
stack canary, i.e. every test fails with an unexpected SHUTDOWN.
Fixes: 14c47b7530e2d ("kvm: selftests: introduce ucall")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM selftests embed the guest "image" as a function in the test itself
and extract the guest code at runtime by manually parsing the elf
headers. The parsing is very simple and doesn't supporting fancy things
like position independent executables. Recent versions of gcc enable
pie by default, which results in triple fault shutdowns in the guest due
to the virtual address in the headers not matching up with the virtual
address retrieved from the function pointer.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
...so that the test doesn't end up in an infinite loop if it fails for
whatever reason, e.g. SHUTDOWN due to gcc inserting stack canary code
into ucall() and attempting to derefence a null segment.
Fixes: ca359066889f7 ("kvm: selftests: add cr4_cpuid_sync_test")
Cc: Wei Huang <wei@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull networking fixes from David Miller:
"Fixes here and there, a couple new device IDs, as usual:
1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei.
2) Fix 64-bit division in iwlwifi, from Arnd Bergmann.
3) Fix documentation for some eBPF helpers, from Quentin Monnet.
4) Some UAPI bpf header sync with tools, also from Quentin Monnet.
5) Set descriptor ownership bit at the right time for jumbo frames in
stmmac driver, from Aaro Koskinen.
6) Set IFF_UP properly in tun driver, from Eric Dumazet.
7) Fix load/store doubleword instruction generation in powerpc eBPF
JIT, from Naveen N. Rao.
8) nla_nest_start() return value checks all over, from Kangjie Lu.
9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this
merge window. From Marcelo Ricardo Leitner and Xin Long.
10) Fix memory corruption with large MTUs in stmmac, from Aaro
Koskinen.
11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric
Dumazet.
12) Fix topology subscription cancellation in tipc, from Erik Hugne.
13) Memory leak in genetlink error path, from Yue Haibing.
14) Valid control actions properly in packet scheduler, from Davide
Caratti.
15) Even if we get EEXIST, we still need to rehash if a shrink was
delayed. From Herbert Xu.
16) Fix interrupt mask handling in interrupt handler of r8169, from
Heiner Kallweit.
17) Fix leak in ehea driver, from Wen Yang"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits)
dpaa2-eth: fix race condition with bql frame accounting
chelsio: use BUG() instead of BUG_ON(1)
net: devlink: skip info_get op call if it is not defined in dumpit
net: phy: bcm54xx: Encode link speed and activity into LEDs
tipc: change to check tipc_own_id to return in tipc_net_stop
net: usb: aqc111: Extend HWID table by QNAP device
net: sched: Kconfig: update reference link for PIE
net: dsa: qca8k: extend slave-bus implementations
net: dsa: qca8k: remove leftover phy accessors
dt-bindings: net: dsa: qca8k: support internal mdio-bus
dt-bindings: net: dsa: qca8k: fix example
net: phy: don't clear BMCR in genphy_soft_reset
bpf, libbpf: clarify bump in libbpf version info
bpf, libbpf: fix version info and add it to shared object
rxrpc: avoid clang -Wuninitialized warning
tipc: tipc clang warning
net: sched: fix cleanup NULL pointer exception in act_mirr
r8169: fix cable re-plugging issue
net: ethernet: ti: fix possible object reference leak
net: ibm: fix possible object reference leak
...
|
|
This patch adds specific test exposing bug in btf_dedup_is_equiv() when
comparing candidate VOID type to a non-VOID canonical type. It's
important for canonical type to be anonymous, otherwise name equality
check will do the right thing and will exit early.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a test case with an excessive number of call stack frames
in dead code.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2019-03-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) libbpf verision fix up from Daniel.
2) fix liveness propagation from Jakub.
3) fix verbose print of refcounted regs from Martin.
4) fix for large map allocations from Martynas.
5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7640ead93924 ("bpf: verifier: make sure callees don't prune
with caller differences") connected up parentage chains of all
frames of the stack. It didn't, however, ensure propagate_liveness()
propagates all liveness information along those chains.
This means pruning happening in the callee may generate explored
states with incomplete liveness for the chains in lower frames
of the stack.
The included selftest is similar to the prior one from commit
7640ead93924 ("bpf: verifier: make sure callees don't prune with
caller differences"), where callee would prune regardless of the
difference in r8 state.
Now we also initialize r9 to 0 or 1 based on a result from get_random().
r9 is never read so the walk with r9 = 0 gets pruned (correctly) after
the walk with r9 = 1 completes.
The selftest is so arranged that the pruning will happen in the
callee. Since callee does not propagate read marks of r8, the
explored state at the pruning point prior to the callee will
now ignore r8.
Propagate liveness on all frames of the stack when pruning.
Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action vlan pop pass index 90
# tc actions replace action vlan \
> pop goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action vlan
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: vlan pop goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? enqueue_hrtimer+0x39/0x90
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|