path: root/tools/testing (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17ktest: Show name and iteration on errorsSteven Rostedt (VMware)1-6/+20
If a test has an error, display not only the what type of test failed, but if the test was giving a name, display that too, as well as the current iteration of the tests. Each test has an iteration number associated to it. For error messages display that iteration number along with the test type and test name. This includes the message that gets sent via email. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-16Merge tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds3-0/+388
Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall
2019-03-16Merge tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds2-14/+9
Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-0/+97
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-14tools/testing/selftests/proc/proc-pid-vm.c: test with vsyscall in mindAlexey Dobriyan1-3/+46
: selftests: proc: proc-pid-vm : ======================================== : proc-pid-vm: proc-pid-vm.c:277: main: Assertion `rv == strlen(buf0)' failed. : Aborted Because the vsyscall mapping is enabled. Read from vsyscall page to tell if vsyscall is being used. Link: http://lkml.kernel.org/r/20190307183204.GA11405@avx2 Link: http://lkml.kernel.org/r/20190219094722.GB28258@shao2-debian Fixes: 34aab6bec23e7e9 ("proc: test /proc/*/maps, smaps, smaps_rollup, statm") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+55
Merge misc updates from Andrew Morton: - a few misc things - the rest of MM - remove flex_arrays, replace with new simple radix-tree implementation * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) Drop flex_arrays sctp: convert to genradix proc: commit to genradix generic radix trees selinux: convert to kvmalloc md: convert to kvmalloc openvswitch: convert to kvmalloc of: fix kmemleak crash caused by imbalance in early memory reservation mm: memblock: update comments and kernel-doc memblock: split checks whether a region should be skipped to a helper function memblock: remove memblock_{set,clear}_region_flags memblock: drop memblock_alloc_*_nopanic() variants memblock: memblock_alloc_try_nid: don't panic treewide: add checks for the return value of memblock_alloc*() swiotlb: add checks for the return value of memblock_alloc*() init/main: add checks for the return value of memblock_alloc*() mm/percpu: add checks for the return value of memblock_alloc*() sparc: add checks for the return value of memblock_alloc*() ia64: add checks for the return value of memblock_alloc*() arch: don't memset(0) memory returned by memblock_alloc() ...
2019-03-12tools/testing/selftests/sysctl/sysctl.sh: add tests for >32-bit values written to 32-bit integersZev Weiss1-0/+55
Patch series "sysctl: fix range-checking in do_proc_dointvec_minmax_conv()", v2. After being left with an unusable system after a typo executing something like 'echo $((1<<24)) > /proc/sys/vm/max_map_count', I found that do_proc_dointvec_minmax_conv() was missing a check to ensure that the converted value actually fits in an int. The first of the following patches enhances the sysctl selftest such that it detects this problem; the second provides a minimal fix (suitable for -stable) such that the selftest passes. The third patch then performs a more thorough refactoring to eliminate the code duplication that led to the bug in the first place (maintaining the passing status of the selftest). This patch (of 3): At present this exposes a bug in do_proc_dointvec_minmax_conv() (it fails to check for values that are too wide to fit in an int). Link: http://lkml.kernel.org/r/20190207123426.9202-2-zev@bewilderbeest.net Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11Merge tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds12-0/+151
Pull tracing updates from Steven Rostedt: "The biggest change for this release is in the histogram code: - Add "onchange(var)" histogram handler that executes a action when $var changes. - Add new "snapshot()" action for histogram handlers, that causes a snapshot of the ring buffer when triggered. ie. onchange(var).snapshot() will trigger a snapshot if var changes. - Add alternative for "trace()" action. Currently, to trigger a synthetic event, the name of that event is used as the handler name, which is inconsistent with the other actions. onchange(var).synthetic(param) where it can now be onchange(var).trace(synthetic, param). The older method will still be allowed, as long as the synthetic events do not overlap with other handler names. - The histogram documentation at testcases were updated for the new changes. Outside of the histogram code, we have: - Added a quicker way to enable set_ftrace_filter files, that will make it much quicker to bisect tracing a function that shouldn't be traced and crashes the kernel. (You can echo in numbers to set_ftrace_filter, and it will select the corresponding function that is in available_filter_functions). - Some better displaying of the tracing data (and more information was added). The rest are small fixes and more clean ups to the code" * tag 'trace-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (37 commits) tracing: Use strncpy instead of memcpy when copying comm in trace.c tracing: Use strncpy instead of memcpy when copying comm for hist triggers tracing: Use strncpy instead of memcpy for string keys in hist triggers tracing: Use str_has_prefix() in synth_event_create() x86/ftrace: Fix warning and considate ftrace_jmp_replace() and ftrace_call_replace() tracing/perf: Use strndup_user() instead of buggy open-coded version doc: trace: Fix documentation for uprobe_profile tracing: Fix spelling mistake: "analagous" -> "analogous" tracing: Comment why cond_snapshot is checked outside of max_lock protection tracing: Add hist trigger action 'expected fail' test case tracing: Add alternative synthetic event trace action test case tracing: Add hist trigger onchange() handler test case tracing: Add hist trigger snapshot() action test case tracing: Add SPDX license GPL-2.0 license identifier to inter-event testcases tracing: Add alternative synthetic event trace action syntax tracing: Add hist trigger onchange() handler Documentation tracing: Add hist trigger onchange() handler tracing: Add hist trigger snapshot() action Documentation tracing: Add hist trigger snapshot() action tracing: Add conditional snapshot ...
2019-03-11tools: mark 'test_vmalloc.sh' executableLinus Torvalds1-0/+0
Several of these scripts have come in as old-fashioned patches, and in the process lost the executable bit. In most cases it doesn't matter, since the test infrastructure will explicitly execute them using the proper shell interpreter, but at least in the case of the new vmalloc test, the lack of execurable bit caused the test to fail with ./run_vmtests: line 217: ./test_vmalloc.sh: Permission denied because of the lacking exectuable permissions bit. This patch fixes that up. NOTE! A simple script to look for non-executable scripts in the kernel, something like git ls-files --stage -- '*.sh' | grep 100644 | cut -f2 | xargs grep -l '#!' will show that there's a lot of other files that _look_ like executable shell scripts, but don't have the executable bit set. I considered just scripting them all to be executable, but since it looks like the common pattern is to not really require it, I'm just doing the minimal fix as pointed out by the kernel test robot. Fixes: a05ef00c9790 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE") Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Uladzislau Rezki <urezki@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-14/+90
Pull networking fixes from David Miller: "First batch of fixes in the new merge window: 1) Double dst_cache free in act_tunnel_key, from Wenxu. 2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the ip_route_input_rcu() path, from Paolo Abeni. 3) Fix appletalk compile regression, from Arnd Bergmann. 4) If SLAB objects reach the TCP sendpage method we are in serious trouble, so put a debugging check there. From Vasily Averin. 5) Memory leak in hsr layer, from Mao Wenan. 6) Only test GSO type on GSO packets, from Willem de Bruijn. 7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet. 8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe. 9) Fix race in ipv4 route exception handling, from Xin Long. 10) Missing DMA memory barrier in hns3 driver, from Jian Shen. 11) Use after free in __tcf_chain_put(), from Vlad Buslov. 12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault. 13) Return value correction when ip_mc_may_pull() fails, from Eric Dumazet. 14) Use after free in x25_device_event(), also from Eric" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) gro_cells: make sure device is up in gro_cells_receive() vxlan: test dev->flags & IFF_UP before calling gro_cells_receive() net/x25: fix use-after-free in x25_device_event() isdn: mISDNinfineon: fix potential NULL pointer dereference net: hns3: fix to stop multiple HNS reset due to the AER changes ip: fix ip_mc_may_pull() return value net: keep refcount warning in reqsk_free() net: stmmac: Avoid one more sometimes uninitialized Clang warning net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports rxrpc: Fix client call queueing, waiting for channel tcp: handle inet_csk_reqsk_queue_add() failures net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry 8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC fou, fou6: avoid uninit-value in gue_err() and gue6_err() net: sched: fix potential use-after-free in __tcf_chain_put() vhost: silence an unused-variable warning vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock connector: fix unsafe usage of ->real_parent vxlan: do not need BH again in vxlan_cleanup() net: hns3: add dma_rmb() for rx description ...
2019-03-10Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds6-0/+936
Pull tpm updates from James Morris: - Clean up the transmission flow Cleaned up the whole transmission flow. Locking of the chip is now done in the level of tpm_try_get_ops() and tpm_put_ops() instead taking the chip lock inside tpm_transmit(). The nested calls inside tpm_transmit(), used with the resource manager, have been refactored out. Should make easier to perform more complex transactions with the TPM without making the subsystem a bigger mess (e.g. encrypted channel patches by James Bottomley). - PPI 1.3 support TPM PPI 1.3 introduces an additional optional command parameter that may be needed for some commands. Display the parameter if the command requires such a parameter. Only command 23 (SetPCRBanks) needs one. The PPI request file will show output like this then: # echo "23 16" > request # cat request 23 16 # echo "5" > request # cat request 5 - Extend all PCR banks in IMA Instead of static PCR banks array, the array of available PCR banks is now allocated dynamically. The digests sizes are determined dynamically using a probe PCR read without relying crypto's static list of hash algorithms. This should finally make sealing of measurements in IMA safe and secure. - TPM 2.0 selftests Added a test suite to tools/testing/selftests/tpm2 previously outside of the kernel tree: https://github.com/jsakkine-intel/tpm2-scripts * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits) tpm/ppi: Enable submission of optional command parameter for PPI 1.3 tpm/ppi: Possibly show command parameter if TPM PPI 1.3 is used tpm/ppi: Display up to 101 operations as define for version 1.3 tpm/ppi: rename TPM_PPI_REVISION_ID to TPM_PPI_REVISION_ID_1 tpm/ppi: pass function revision ID to tpm_eval_dsm() tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend() KEYS: trusted: explicitly use tpm_chip structure from tpm_default_chip() tpm: move tpm_chip definition to include/linux/tpm.h tpm: retrieve digest size of unknown algorithms with PCR read tpm: rename and export tpm2_digest and tpm2_algorithms tpm: dynamically allocate the allocated_banks array tpm: remove @flags from tpm_transmit() tpm: take TPM chip power gating out of tpm_transmit() tpm: introduce tpm_chip_start() and tpm_chip_stop() tpm: remove TPM_TRANSMIT_UNLOCKED flag tpm: use tpm_try_get_ops() in tpm-sysfs.c. tpm: remove @space from tpm_transmit() tpm: move TPM space code out of tpm_transmit() tpm: move tpm_validate_commmand() to tpm2-space.c tpm: clean up tpm_try_transmit() error handling flow ...
2019-03-09Merge tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-0/+9
Pull media updates from Mauro Carvalho Chehab: - remove sensor drivers that got converted from soc_camera - remaining soc_camera drivers got moved to staging - some documentation cleanups and improvements - the imx staging driver now supports imx7 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera - the vim2m driver now does what a m2m convert driver expects to do - epoll() fixes on media subsystems - several drivers fixes, typos, cleanups and improvements * tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits) media: dvb/earth-pt1: fix wrong initialization for demod blocks media: vim2m: Address some coding style issues media: vim2m: don't use BUG() media: vim2m: speedup passthrough copy media: vim2m: add an horizontal scaler media: vim2m: don't accept YUYV anymore as output format media: vim2m: add vertical linear scaler media: vim2m: better handle cap/out buffers with different sizes media: vim2m: use different framesizes for bayer formats media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES media: vim2m: ensure that width is multiple of two media: vim2m: improve debug messages media: vim2m: add bayer capture formats media: a few more typos at staging, pci, platform, radio and usb media: Documentation: fix several typos media: staging: fix several typos media: include: fix several typos media: common: fix several typos media: v4l2-core: fix several typos media: usb: fix several typos ...
2019-03-09Merge tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds6-22/+68
Pull kselftest update fromShuah Khan: - ir test compile warnings fixes - seccomp test fixes and improvements from Tycho Andersen and Kees Cook - ftrace fixes to non-POSIX-compliant constructs in colored output code and handling absence of tput from Juerg Haefliger * tag 'linux-kselftest-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Handle the absence of tput selftests/ftrace: Replace \e with \033 selftests/ftrace: Replace echo -e with printf selftests: ir: skip when non-root user runs the test selftests: ir: skip when lirc device doesn't exist. selftests: ir: fix warning: "%s" directive output may be truncated ’ directive output may be truncated selftests/seccomp: Actually sleep for 1/10th second selftests/harness: Update named initializer syntax selftests: unshare userns in seccomp pidns testcases selftests: set NO_NEW_PRIVS bit in seccomp user tests selftests: skip seccomp get_metadata test if not real root selftest: include stdio.h in kselftest.h selftests: fix typo in seccomp_bpf.c selftests: don't kill child immediately in get_metadata() test
2019-03-08Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatchingLinus Torvalds8-0/+1066
Pull livepatching updates from Jiri Kosina: - support for something we call 'atomic replace', and allows for much better handling of cumulative patches (which is something very useful for distros), from Jason Baron with help of Petr Mladek and Joe Lawrence - improvement of handling of tasks blocking finalization, from Miroslav Benes - update of MAINTAINERS file to reflect move towards group maintainership * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits) livepatch/selftests: use "$@" to preserve argument list livepatch: Module coming and going callbacks can proceed with all listed patches livepatch: Proper error handling in the shadow variables selftest livepatch: return -ENOMEM on ptr_id() allocation failure livepatch: Introduce klp_for_each_patch macro livepatch: core: Return EOPNOTSUPP instead of ENOSYS selftests/livepatch: add DYNAMIC_DEBUG config dependency livepatch: samples: non static warnings fix livepatch: update MAINTAINERS livepatch: Remove signal sysfs attribute livepatch: Send a fake signal periodically selftests/livepatch: introduce tests livepatch: Remove ordering (stacking) of the livepatches livepatch: Atomic replace and cumulative patches documentation livepatch: Remove Nop structures when unused livepatch: Add atomic replace livepatch: Use lists to manage patches, objects and functions livepatch: Simplify API by removing registration step livepatch: Don't block the removal of patches loaded after a forced transition livepatch: Consolidate klp_free functions ...
2019-03-07Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds8-5/+226
Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-03-07Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds5-0/+371
Pull security subsystem updates from James Morris: - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and task blobs. This paves the way for more full-featured LSMs to be merged, and is specifically aimed at LandLock and SARA LSMs. This work is from Casey and Kees. - There's a new LSM from Micah Morton: "SafeSetID gates the setid family of syscalls to restrict UID/GID transitions from a given UID/GID to only those approved by a system-wide whitelist." This feature is currently shipping in ChromeOS. * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits) keys: fix missing __user in KEYCTL_PKEY_QUERY LSM: Update list of SECURITYFS users in Kconfig LSM: Ignore "security=" when "lsm=" is specified LSM: Update function documentation for cap_capable security: mark expected switch fall-throughs and add a missing break tomoyo: Bump version. LSM: fix return value check in safesetid_init_securityfs() LSM: SafeSetID: add selftest LSM: SafeSetID: remove unused include LSM: SafeSetID: 'depend' on CONFIG_SECURITY LSM: Add 'name' field for SafeSetID in DEFINE_LSM LSM: add SafeSetID module that gates setid calls LSM: add SafeSetID module that gates setid calls tomoyo: Allow multiple use_group lines. tomoyo: Coding style fix. tomoyo: Swicth from cred->security to task_struct->security. security: keys: annotate implicit fall throughs security: keys: annotate implicit fall throughs security: keys: annotate implicit fall through capabilities:: annotate implicit fall through ...
2019-03-07bpf: fix replace_map_fd_with_map_ptr's ldimm64 second imm fieldDaniel Borkmann1-1/+14
Non-zero imm value in the second part of the ldimm64 instruction for BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd only ever sits in the first instructions' imm field. None of the BPF loaders known to us are using it, so risk of regression is minimal. For clarity and consistency, the few insn->{src_reg,imm} occurrences are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF selftest suite as well. Fixes: 0246e64d9a5f ("bpf: handle pseudo BPF_LD_IMM64 insn") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-07selftests: bpf: test_progs: initialize duration in singal_pending testStanislav Fomichev1-1/+1
CHECK macro implicitly uses duration. We call CHECK() a couple of times before duration is initialized from bpf_prog_test_run(). Explicitly set duration to 0 to avoid compiler warnings. Fixes: 740f8a657221 ("selftests/bpf: make sure signal interrupts BPF_PROG_TEST_RUN") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07selftests: bpf: fix compilation with out-of-tree $(OUTPUT)Stanislav Fomichev1-10/+23
A bunch of related changes lumped together: * Create prog_tests and verifier output directories; these don't exist with out-of-tree $(OUTPUT) * Add missing -I (via separate TEST_{PROGS,VERIFIER}_CFLAGS) for the main tree ($(PWD) != $(OUTPUT) for out-of-tree) * Add libbpf.a dependency for test_progs_32 (parallel make fails otherwise) * Add missing "; \" after "cd" when generating test.h headers Tested by: $ alias m="make -s -j$(nproc)" $ m -C tools/testing/selftests/bpf/ clean $ m -C tools/lib/bpf/ clean $ rm -rf xxx; mkdir xxx; m -C tools/testing/selftests/bpf/ OUTPUT=$PWD/xxx $ m -C tools/testing/selftests/bpf/ Fixes: 3f30658830f3 ("selftests: bpf: break up test_progs - preparations") Fixes: 2dfb40121ee8 ("selftests: bpf: prepare for break up of verifier tests") Fixes: 3ef84346c561 ("selftests: bpf: makefile support sub-register code-gen test mode") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-07selftests/bpf: test that GSO works in lwt_ip_encapPeter Oskolkov1-2/+52
Add a test on egress that a large TCP packet successfully goes through the lwt+bpf encap tunnel. Although there is no direct evidence that GSO worked, as opposed to e.g. TCP segmentation or IP fragmentation (maybe a kernel stats counter should be added to track the number of failed GSO attempts?), without the previous patch in the patchset this test fails, and printk-debugging showed that software-based GSO succeeded here (veth is not compatible with SKB_GSO_DODGY, so GSO happens in the software stack). Also removed an unnecessary nodad and added a missed failed flag. Signed-off-by: Peter Oskolkov <posk@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-06Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds3-5/+7
Pull driver core updates from Greg KH: "Here is the big driver core patchset for 5.1-rc1 More patches than "normal" here this merge window, due to some work in the driver core by Alexander Duyck to rework the async probe functionality to work better for a number of devices, and independant work from Rafael for the device link functionality to make it work "correctly". Also in here is: - lots of BUS_ATTR() removals, the macro is about to go away - firmware test fixups - ihex fixups and simplification - component additions (also includes i915 patches) - lots of minor coding style fixups and cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits) driver core: platform: remove misleading err_alloc label platform: set of_node in platform_device_register_full() firmware: hardcode the debug message for -ENOENT driver core: Add missing description of new struct device_link field driver core: Fix PM-runtime for links added during consumer probe drivers/component: kerneldoc polish async: Add cmdline option to specify drivers to be async probed driver core: Fix possible supplier PM-usage counter imbalance PM-runtime: Fix __pm_runtime_set_status() race with runtime resume driver: platform: Support parsing GpioInt 0 in platform_get_irq() selftests: firmware: fix verify_reqs() return value Revert "selftests: firmware: remove use of non-standard diff -Z option" Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config" device: Fix comment for driver_data in struct device kernfs: Allocating memory for kernfs_iattrs with kmem_cache. sysfs: remove unused include of kernfs-internal.h driver core: Postpone DMA tear-down until after devres release driver core: Document limitation related to DL_FLAG_RPM_ACTIVE PM-runtime: Take suppliers into account in __pm_runtime_set_status() device.h: Add __cold to dev_<level> logging functions ...
2019-03-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds15-5/+768
Merge misc updates from Andrew Morton: - a few misc things - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits) tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include proc: more robust bulk read test proc: test /proc/*/maps, smaps, smaps_rollup, statm proc: use seq_puts() everywhere proc: read kernel cpu stat pointer once proc: remove unused argument in proc_pid_lookup() fs/proc/thread_self.c: code cleanup for proc_setup_thread_self() fs/proc/self.c: code cleanup for proc_setup_self() proc: return exit code 4 for skipped tests mm,mremap: bail out earlier in mremap_to under map pressure mm/sparse: fix a bad comparison mm/memory.c: do_fault: avoid usage of stale vm_area_struct writeback: fix inode cgroup switching comment mm/huge_memory.c: fix "orig_pud" set but not used mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC mm/memcontrol.c: fix bad line in comment mm/cma.c: cma_declare_contiguous: correct err handling mm/page_ext.c: fix an imbalance with kmemleak mm/compaction: pass pgdat to too_many_isolated() instead of zone mm: remove zone_lru_lock() function, access ->lru_lock directly ...
2019-03-05tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate includeSouptick Joarder1-1/+0
Remove duplicate header which is included twice. Link: http://lkml.kernel.org/r/20190304182719.GA6606@jordon-HP-15-Notebook-PC Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05proc: more robust bulk read testAlexey Dobriyan1-0/+14
/proc may not be mounted and test will exit successfully. Ensure proc is mounted at /proc. Link: http://lkml.kernel.org/r/20190209105613.GA10384@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05proc: test /proc/*/maps, smaps, smaps_rollup, statmAlexey Dobriyan3-0/+408
Start testing VM related fiels found in per-process files. Do it by jiting small executable which brings its address space to precisely known state, then comparing /proc/*/maps, smaps, smaps_rollup, and statm files to expected values. Currently only x86_64 is supported. [adobriyan@gmail.com: exit correctly in /proc/*/maps test] Link: http://lkml.kernel.org/r/20190206073659.GB15311@avx2 Link: http://lkml.kernel.org/r/20190203165806.GA14568@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05proc: return exit code 4 for skipped testsAlexey Dobriyan5-5/+5
Test harness uses 4 for SKIP, not 2. Link: http://lkml.kernel.org/r/20190108193108.GA12259@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05tmpfs: test link accounting with O_TMPFILEAlexey Dobriyan4-0/+76
Mount tmpfs with "nr_inodes=3" for easy check. Link: http://lkml.kernel.org/r/20190219215016.GA20084@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matej Kupljen <matej.kupljen@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05selftests/memfd: add tests for F_SEAL_FUTURE_WRITE sealJoel Fernandes (Google)1-0/+74
Add tests to verify sealing memfds with the F_SEAL_FUTURE_WRITE works as expected. Link: http://lkml.kernel.org/r/20190112203816.85534-3-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Shuah Khan <shuah@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULEUladzislau Rezki (Sony)2-0/+192
Add the test script for the kernel test driver to analyse vmalloc allocator for benchmarking and stressing purposes. It is just a kernel module loader. You can specify and pass different parameters in order to investigate allocations behaviour. See "usage" output for more details. Also add basic vmalloc smoke test to the "run_vmtests" suite. Link: http://lkml.kernel.org/r/20190103142108.20744-4-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Shuah Khan <shuah@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-2207/+17
Pull RCU updates from Ingo Molnar: "The main RCU related changes in this cycle were: - Additional cleanups after RCU flavor consolidation - Grace-period forward-progress cleanups and improvements - Documentation updates - Miscellaneous fixes - spin_is_locked() conversions to lockdep - SPDX changes to RCU source and header files - SRCU updates - Torture-test updates, including nolibc updates and moving nolibc to tools/include" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits) locking/locktorture: Convert to SPDX license identifier linux/torture: Convert to SPDX license identifier torture: Convert to SPDX license identifier linux/srcu: Convert to SPDX license identifier linux/rcutree: Convert to SPDX license identifier linux/rcutiny: Convert to SPDX license identifier linux/rcu_sync: Convert to SPDX license identifier linux/rcu_segcblist: Convert to SPDX license identifier linux/rcupdate: Convert to SPDX license identifier linux/rcu_node_tree: Convert to SPDX license identifier rcu/update: Convert to SPDX license identifier rcu/tree: Convert to SPDX license identifier rcu/tiny: Convert to SPDX license identifier rcu/sync: Convert to SPDX license identifier rcu/srcu: Convert to SPDX license identifier rcu/rcutorture: Convert to SPDX license identifier rcu/rcu_segcblist: Convert to SPDX license identifier rcu/rcuperf: Convert to SPDX license identifier rcu/rcu.h: Convert to SPDX license identifier RCU/torture.txt: Remove section MODULE PARAMETERS ...
2019-03-05selftests: add tests for pidfd_send_signal()Christian Brauner3-0/+388
As suggested by Andrew Morton in [1] add selftests for the new sys_pidfd_send_signal() syscall: /* test_pidfd_send_signal_syscall_support */ Test whether the pidfd_send_signal() syscall is supported and the tests can be run or need to be skipped. /* test_pidfd_send_signal_simple_success */ Test whether sending a signal via a pidfd works. /* test_pidfd_send_signal_exited_fail */ Verify that sending a signal to an already exited process fails with ESRCH. /* test_pidfd_send_signal_recycled_pid_fail */ Verify that a recycled pid cannot be signaled via a pidfd referring to an already exited process that had the same pid (cf. [2], [3]). [1]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [2]: https://lore.kernel.org/lkml/20181230210245.GA30252@mail.hallyn.com/ [3]: https://lore.kernel.org/lkml/20181230232711.7aayb7vnhogbv4co@brauner.io/ Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Acked-by: Serge Hallyn <serge@hallyn.com>
2019-03-04selftest/net: Remove duplicate headerSouptick Joarder1-1/+0
Remove duplicate header which is included twice. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller35-1989/+2237
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-03-04 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP support to libbpf. Rationale is to facilitate writing AF_XDP applications by offering higher-level APIs that hide many of the details of the AF_XDP uapi. Sample programs are converted over to this new interface as well, from Magnus. 2) Introduce a new cant_sleep() macro for annotation of functions that cannot sleep and use it in BPF_PROG_RUN() to assert that BPF programs run under preemption disabled context, from Peter. 3) Introduce per BPF prog stats in order to monitor the usage of BPF; this is controlled by kernel.bpf_stats_enabled sysctl knob where monitoring tools can make use of this to efficiently determine the average cost of programs, from Alexei. 4) Split up BPF selftest's test_progs similarly as we already did with test_verifier. This allows to further reduce merge conflicts in future and to get more structure into our quickly growing BPF selftest suite, from Stanislav. 5) Fix a bug in BTF's dedup algorithm which can cause an infinite loop in some circumstances; also various BPF doc fixes and improvements, from Andrii. 6) Various BPF sample cleanups and migration to libbpf in order to further isolate the old sample loader code (so we can get rid of it at some point), from Jakub. 7) Add a new BPF helper for BPF cgroup skb progs that allows to set ECN CE code point and a Host Bandwidth Manager (HBM) sample program for limiting the bandwidth used by v2 cgroups, from Lawrence. 8) Enable write access to skb->queue_mapping from tc BPF egress programs in order to let BPF pick TX queue, from Jesper. 9) Fix a bug in BPF spinlock handling for map-in-map which did not propagate spin_lock_off to the meta map, from Yonghong. 10) Fix a bug in the new per-CPU BPF prog counters to properly initialize stats for each CPU, from Eric. 11) Add various BPF helper prototypes to selftest's bpf_helpers.h, from Willem. 12) Fix various BPF samples bugs in XDP and tracing progs, from Toke, Daniel and Yonghong. 13) Silence preemption splat in test_bpf after BPF_PROG_RUN() enforces it now everywhere, from Anders. 14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to get error handling working, from Dan. 15) Fix bpftool documentation and auto-completion with regards to stream_{verdict,parser} attach types, from Alban. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04bpf: add test cases for non-pointer sanitiation logicDaniel Borkmann1-1/+43
Add two additional tests for further asserting the BPF_ALU_NON_POINTER logic with cases that were missed previously. Cc: Marek Majkowski <marek@cloudflare.com> Cc: Arthur Fabre <afabre@cloudflare.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-2/+1
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: 1) Add .release_ops to properly unroll .select_ops, use it from nft_compat. After this change, we can remove list of extensions too to simplify this codebase. 2) Update amanda conntrack helper to support v3.4, from Florian Tham. 3) Get rid of the obsolete BUGPRINT macro in ebtables, from Florian Westphal. 4) Merge IPv4 and IPv6 masquerading infrastructure into one single module. From Florian Westphal. 5) Patchset to remove nf_nat_l3proto structure to get rid of indirections, from Florian Westphal. 6) Skip unnecessary conntrack timeout updates in case the value is still the same, also from Florian Westphal. 7) Remove unnecessary 'fall through' comments in empty switch cases, from Li RongQing. 8) Fix lookup to fixed size hashtable sets on big endian with 32-bit keys. 9) Incorrect logic to deactivate path of fixed size hashtable sets, element was being tested to self. 10) Remove nft_hash_key(), the bitmap set is always selected for 16-bit keys. 11) Use boolean whenever possible in IPVS codebase, from Andrea Claudi. 12) Enter close state in conntrack if RST matches exact sequence number, from Florian Westphal. 13) Initialize dst_cache in tunnel extension, from wenxu. 14) Pass protocol as u16 to xt_check_match and xt_check_target, from Li RongQing. 15) SCTP header is granted to be in a linear area from IPVS NAT handler, from Xin Long. 16) Don't steal packets coming from slave VRF device from the ip_sabotage_in() path, from David Ahern. 17) Fix unsafe update of basechain stats, from Li RongQing. 18) Make sure CONNTRACK_LOCKS is power of 2 to let compiler optimize modulo operation as bitwise AND, from Li RongQing. 19) Use device_attribute instead of internal definition in the IDLETIMER target, from Sami Tolvanen. 20) Merge redir, masq and IPv4/IPv6 NAT chain types, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-33/+113
2019-03-02selftests: bpf: break up test_progs - miscStanislav Fomichev11-735/+754
Move the rest of prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - spinlockStanislav Fomichev4-103/+106
Move spinlock prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - tracepointStanislav Fomichev5-427/+431
Move tracepoint prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - stackmapStanislav Fomichev6-476/+483
Move stackmap prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - xdpStanislav Fomichev5-162/+163
Move xdp prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - pkt accessStanislav Fomichev3-51/+53
Move pkt access prog tests into separate files. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02selftests: bpf: break up test_progs - preparationsStanislav Fomichev4-76/+119
Add new prog_tests directory where tests are supposed to land. Each prog_tests/<filename>.c is expected to have a global function with signature 'void test_<filename>(void)'. Makefile automatically generates prog_tests/tests.h file with entry for each prog_tests file: #ifdef DECLARE extern void test_<filename>(void); ... #endif #ifdef CALL test_<filename>(); ... #endif prog_tests/tests.h is included in test_progs.c in two places with appropriate defines. This scheme allows us to move each function with a separate patch without breaking anything. Compared to the recent verifier split, each separate file here is a compilation unit and test_progs.[ch] is now used as a place to put some common routines that might be used by multiple tests. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02bpf: sync bpf.h to tools and update bpf_helpers.hbrakmo1-0/+2
This patch syncs the uapi bpf.h to tools/ and also updates bpf_herlpers.h in tools/ Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-01tc-testing: Allow test cases to be skippedLucas Bates4-13/+27
By adding a check for an optional key/value pair to the test case data, individual test cases may be skipped to prevent tdc from aborting a test run due to setup or teardown failure. If a test case is skipped, it will still appear in the results output to allow for a consistent number of executed tests in each run. However, the test will be marked as skipped. This support for skipping extends to any plugins that may generate additional results for each executed test. Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02selftests/bpf: set unlimited RLIMIT_MEMLOCK for test_sock_fieldsYonghong Song1-0/+1
This is to avoid permission denied error. A lot of systems may have a much lower number, e.g., 64KB, for RLIMIT_MEMLOCK, which may not be sufficient for the test to run successfully. Fixes: e0b27b3f97b8 ("bpf: Add test_sock_fields for skb->sk and bpf_tcp_sock") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01selftests: fixes for UDP GROPaolo Abeni2-17/+33
The current implementation for UDP GRO tests is racy: the receiver may flush the RX queue while the sending is still transmitting and incorrectly report RX errors, with a wrong number of packet received. Add explicit timeouts to the receiver for both connection activation (first packet received for UDP) and reception completion, so that in the above critical scenario the receiver will wait for the transfer completion. Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01selftests/bpf: add btf_dedup test of FWD/STRUCT resolutionAndrii Nakryiko1-0/+45
This patch adds a btf_dedup test exercising logic of STRUCT<->FWD resolution and validating that STRUCT is not resolved to a FWD. It also forces hash collisions, forcing both FWD and STRUCT to be candidates for each other. Previously this condition caused infinite loop due to FWD pointing to STRUCT and STRUCT pointing to its FWD. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01selftests/bpf: fix btf_dedup testing codeAndrii Nakryiko2-2/+3
btf_dedup testing code doesn't account for length of struct btf_header when calculating the start of a string section. This patch fixes this problem. Fixes: 49b57e0d01db ("tools/bpf: remove btf__get_strings() superseded by raw data API") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01tools: libbpf: add a correctly named define for map iterationJakub Kicinski1-1/+1
For historical reasons the helper to loop over maps in an object is called bpf_map__for_each while it really should be called bpf_object__for_each_map. Rename and add a correctly named define for backward compatibility. Switch all in-tree users to the correct name (Quentin). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>