| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SME introduces a new mode called streaming mode in which the SVE registers
have a different vector length. Since the ptrace interface for this is
based on the existing SVE interface prepare for supporting this by moving
the regset specific configuration into struct and passing that around,
allowing these tests to be reused for streaming mode. As we will also have
to verify the interoperation of the SVE and streaming SVE regsets don't
just iterate over an array.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210184133.320748-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The commit referenced below added fixup_map_timer support (to create a
BPF map containing timers), but failed to increase the size of the
map_fds array, leading to out of bounds write. Fix this by changing
MAX_NR_MAPS to 22.
Fixes: e60e6962c503 ("selftests/bpf: Add tests for restricted helpers")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211214014800.78762-1-memxor@gmail.com
|
|
Add a test case to cover the bug fixed by the previous patch.
Edit the MAC address of one netdev so that it matches the MAC address of
the second netdev. Verify that the two MAC profiles were consolidated by
testing that the MAC profiles occupancy decreased by one.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit ad9a7f96445b ("libbpf: Improve logging around BPF program
loading"), libbpf_debug_print() gets an additional prog_name parameter
but doesn't pass it to printf(). Since the format string now expects two
arguments, printf() may read uninitialized data and segfault. Pass
prog_name through.
Fixes: ad9a7f96445b ("libbpf: Improve logging around BPF program loading")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211213183058.346066-1-jean-philippe@linaro.org
|
|
kunit.py isn't very clear that
1) it stashes a copy of the unparsed output in $BUILD_DIR/test.log
2) it sets $BUILD_DIR=.kunit by default
So it's trickier than it should be for a user to come up with the right
command to do so.
Make kunit.py print out a command for this if
a) we saw a test case crash
b) we only ran one kernel (test.log only contains output from the last)
Example suggested command:
$ scripts/decode_stacktrace.sh .kunit/vmlinux .kunit < .kunit/test.log | tee .kunit/decoded.log | ./tools/testing/kunit/kunit.py parse
Without debug info a user might see something like
[14:11:25] Call Trace:
[14:11:25] ? kunit_binary_assert_format (:?)
[14:11:25] kunit_try_run_case (test.c:?)
[14:11:25] ? __kthread_parkme (kthread.c:?)
[14:11:25] kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] ? kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] kthread (kthread.c:?)
[14:11:25] new_thread_handler (:?)
[14:11:25] [CRASHED]
`tee` is in GNU coreutils, so it seems fine to add that into the
pipeline by default, that way users can inspect the otuput in more
detail.
Note: to turn on debug info, users would need to do something like
$ echo -e 'CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y' >> .kunit/.kunitconfig
$ ./tools/testing/kunit/kunit.py config
$ ./tools/testing/kunit/kunit.py build
$ <then run decode_stacktrace.sh now vmlinux is updated>
This feels too clunky to include in the instructions.
With --kconfig_add [1], it would become a bit less painful.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Problem: currently, if you remove something from your kunitconfig,
kunit.py will not regenerate the .config file.
The same thing happens if you did --kunitconfig_add=CONFIG_KASAN=y [1]
and then ran again without it. Your new run will still have KASAN.
The reason is that kunit.py won't regenerate the .config file if it's a
superset of the kunitconfig. This speeds it up a bit for iterating.
This patch adds an additional check that forces kunit.py to regenerate
the .config file if the current kunitconfig doesn't match the previous
one.
What this means:
* deleting entries from .kunitconfig works as one would expect
* dropping a --kunitconfig_add also triggers a rebuild
* you can still edit .config directly to turn on new options
We implement this by creating a `last_used_kunitconfig` file in the
build directory (so .kunit, by default) after we generate the .config.
When comparing the kconfigs, we compare python sets, so duplicates and
permutations don't trip us up.
The majority of this patch is adding unit tests for the existing logic
and for the new case where `last_used_kunitconfig` differs.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The current error message is precise, but not very clear if you don't
already know what it's talking about, e.g.
> $ make ARCH=um olddefconfig O=.kunit
> ERROR:root:Provided Kconfig is not contained in validated .config. Following fields found in kunitconfig, but not in .config: CONFIG_DRM=y
Try to reword the error message so that it's
* your missing options usually have unsatisified dependencies
* if you're on UML, that might be the cause (it is, in this example)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
E.g. run tests but with KASAN
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
This also works with --kunitconfig
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kunitconfig=fs/ext4 --kconfig_add=CONFIG_KASAN=y
This flag is inspired by TuxMake's --kconfig-add, see
https://gitlab.com/Linaro/tuxmake#examples.
Our version just uses "_" as the delimiter for consistency with
pre-existing flags like --build_dir, --make_options, --kernel_args, etc.
Note: this does make it easier to run into a pre-existing edge case:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
$ ./tools/testing/kunit/kunit.py run --arch=x86_64
This second invocation ^ still has KASAN enabled!
kunit.py won't call olddefconfig if our current .config is already a
superset of the provided kunitconfig.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
read_from_file() clears its `self` Kconfig object and parses a config
file.
It is a way to construct Kconfig objects more so than an operation on
Kconfig objects. This is reflected in the fact its only ever used as:
kconfig = kunit_config.Kconfig()
kconfig.read_from_file(path)
So clean this up and simplify callers by replacing it with
kconfig = kunit_config.parse_file(path)
Do the same thing for the related parse_from_string() function as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
With the parser rework [1] and run_kernel() rework [2], this allows the
parser to print out test results incrementally.
Currently, that's held up by the fact that the LineStream eagerly
pre-fetches the next line when you call pop().
This blocks parse_test_result() from returning until the line *after*
the "ok 1 - test name" line is also printed.
One can see this with the following example:
$ (echo -e 'TAP version 14\n1..3\nok 1 - fake test'; sleep 2; echo -e 'ok 2 - fake test 2'; sleep 3; echo -e 'ok 3 - fake test 3') | ./tools/testing/kunit/kunit.py parse
Before this patch [1]: there's a pause before 'fake test' is printed.
After this patch: 'fake test' is printed out immediately.
This patch also adds
* a unit test to verify LineStream's behavior directly
* a test case to ensure that it's lazily calling the generator
* an explicit exception for when users go beyond EOF
[1] https://lore.kernel.org/linux-kselftest/20211006170049.106852-1-dlatypov@google.com/
[2] https://lore.kernel.org/linux-kselftest/20211005011340.2826268-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It's possible for a test to have a subtest header, but zero valid
subtests. We used to error on this if the test plan had no subtests
listed, but it's possible to have subtests without a test plan (indeed,
this is how parameterised tests work).
Tests with 0 subtests now have the result NO_TESTS, and will report an
error (which does not halt test execution, but is printed in a scary red
colour and is noted in the results summary).
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The (K)TAP spec encourages test output to begin with a 'test plan': a
count of the number of tests being run of the form:
1..n
However, some test suites might not know the number of subtests in
advance (for example, KUnit's parameterised tests use a generator
function). In this case, it's not possible to print the test plan in
advance.
kunit_tool already parses test output which doesn't contain a plan, but
reports an error. Since we want to use nested subtests with KUnit
paramterised tests, remove this error.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This formalizes the checks KUnit maintainers have been running (or in
other cases: forgetting to run).
This script also runs them all in parallel to minimize friction (pytype
can be fairly slow, but not slower than running kunit.py).
Example output:
$ ./tools/testing/kunit/run_checks.py
Waiting on 4 checks (kunit_tool_test.py, kunit smoke test, pytype, mypy)...
kunit_tool_test.py: PASSED
mypy: PASSED
pytype: PASSED
kunit smoke test: PASSED
On failure or timeout (5 minutes), it'll dump out the stdout/stderr.
E.g. adding in a type-checking error:
mypy: FAILED
> kunit.py:54: error: Name 'nonexistent_function' is not defined
> Found 1 error in 1 file (checked 8 source files)
mypy and pytype are two Python type-checkers and must be installed.
This file treats them as optional and will mark them as SKIPPED if not
installed.
This tool also runs `kunit.py run --kunitconfig=lib/kunit` to run
KUnit's own KUnit tests and to verify KUnit kernel code and kunit.py
play nicely together.
It uses --build_dir=kunit_run_checks so as not to clobber the default
build_dir, which helps make it faster by reducing the need to rebuild,
esp. if you're been passing in --arch instead of using UML.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, KUnit will report SKIPPED tests as having failed if one uses
--json.
Add the missing if statement to set the appropriate status ("SKIP").
See https://api.kernelci.org/schema-test-case.html:
"status": {
"type": "string",
"description": "The status of the execution of this test case",
"enum": ["PASS", "FAIL", "SKIP", "ERROR"],
"default": "PASS"
},
with this, we now can properly produce all four of the statuses.
Fixes: 5acaf6031f53 ("kunit: tool: Support skipped tests in kunit_tool")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adding tests for get_func_[arg|ret|arg_cnt] helpers.
Using these helpers in fentry/fexit/fmod_ret programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-6-jolsa@kernel.org
|
|
Adding verifier test for accessing int pointer argument in
tracing programs.
The test program loads 2nd argument of bpf_modify_return_test
function which is int pointer and checks that verifier allows
that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-3-jolsa@kernel.org
|
|
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f2485417 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test is currently run on a single host with private addresses,
either over veth or by setting a nic in loopback mode with macvlan.
Support running between two real devices. Allow overriding addresses.
Also cut timeout to fail faster on error and explicitly log success.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tiny fix. Option -u ("use udp") does not take an argument.
It can cause the next argument to silently be ignored.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
bpf_create_map_xattr() call was reintroduced after merging bpf tree into
bpf-next tree. Convert the last instance into bpf_map_create() call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211212191341.2529573-1-andrii@kernel.org
|
|
IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.
Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit referenced below added configuration in the default VRF that
duplicates a VRF to check MD5 passwords are properly used and fail
when expected. That config should not be added all the time as it
can cause tests to pass that should not (by matching on default VRF
setup when it should not). Move the duplicate setup to a function
that is only called for the MD5 tests and add a cleanup function
to remove it after the MD5 tests.
Fixes: 5cad8bce26e0 ("fcnal-test: Add TCP MD5 tests for VRF")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If any sub-test in this icmp_redirect.sh is failing but not expected
to fail. The script will complain:
./icmp_redirect.sh: line 72: [: 1: unary operator expected
This is because when the sub-test is not expected to fail, we won't
pass any value for the xfail local variable in log_test() and thus
it's empty. Fix this by passing 0 as the 4th variable to log_test()
for non-xfail cases.
v2: added fixes tag
Fixes: 0a36a75c6818 ("selftests: icmp_redirect: support expected failures")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As mentined by Takashi Sakamoto, the system-wide alsa-lib configuration
may override the standard device declarations. This patch use the private
alsa-lib configuration to set the predictable environment.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20211208095209.1772296-1-perex@perex.cz
[Restructure version test to keep the preprocessor happy -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-4-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The volatile attribute of control element means that the hardware can
voluntarily change the state of control element independent of any
operation by software. ALSA control core necessarily sends notification
to userspace subscribers for any change from userspace application, while
it doesn't for the hardware's voluntary change.
This commit adds optimization for the attribute. Even if read value is
different from written value, the test reports success as long as the
target control element has the attribute. On the other hand, the
difference is itself reported for developers' convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/Ya7TAHdMe9i41bsC@workstation
[Fix comment style as suggested by Shuah -- broonie]
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211210185410.740009-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a basic test for the mixer control interface. For every control on
every sound card in the system it checks that it can read and write the
default value where the control supports that and for writeable controls
attempts to write all valid values, restoring the default values after
each test to minimise disruption for users.
There are quite a few areas for improvement - currently no coverage of the
generation of notifications, several of the control types don't have any
coverage for the values and we don't have any testing of error handling
when we attempt to write out of range values - but this provides some basic
coverage.
This is added as a kselftest since unlike other ALSA test programs it does
not require either physical setup of the device or interactive monitoring
by users and kselftest is one of the test suites that is frequently run by
people doing general automated testing so should increase coverage. It is
written in terms of alsa-lib since tinyalsa is not generally packaged for
distributions which makes things harder for general users interested in
kselftest as a whole but it will be a barrier to people with Android.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211210185410.740009-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Four test cases are added:
(1) ensure the return value is expected
(2) ensure no const string size is rejected
(3) ensure writable target is rejected
(4) ensure no null-terminated target is rejected
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-5-houtao1@huawei.com
|
|
Add benchmark to compare the performance between home-made strncmp()
in bpf program and bpf_strncmp() helper. In summary, the performance
win of bpf_strncmp() under x86-64 is greater than 18% when the compared
string length is greater than 64, and is 179% when the length is 4095.
Under arm64 the performance win is even bigger: 33% when the length
is greater than 64 and 600% when the length is 4095.
The following is the details:
no-helper-X: use home-made strncmp() to compare X-sized string
helper-Y: use bpf_strncmp() to compare Y-sized string
Under x86-64:
no-helper-1 3.504 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-1 3.347 ± 0.001M/s (drops 0.000 ± 0.000M/s)
no-helper-8 3.357 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-8 3.307 ± 0.001M/s (drops 0.000 ± 0.000M/s)
no-helper-32 3.064 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-32 3.253 ± 0.001M/s (drops 0.000 ± 0.000M/s)
no-helper-64 2.563 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-64 3.040 ± 0.001M/s (drops 0.000 ± 0.000M/s)
no-helper-128 1.975 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-128 2.641 ± 0.000M/s (drops 0.000 ± 0.000M/s)
no-helper-512 0.759 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-512 1.574 ± 0.000M/s (drops 0.000 ± 0.000M/s)
no-helper-2048 0.329 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-2048 0.602 ± 0.000M/s (drops 0.000 ± 0.000M/s)
no-helper-4095 0.117 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-4095 0.327 ± 0.000M/s (drops 0.000 ± 0.000M/s)
Under arm64:
no-helper-1 2.806 ± 0.004M/s (drops 0.000 ± 0.000M/s)
helper-1 2.819 ± 0.002M/s (drops 0.000 ± 0.000M/s)
no-helper-8 2.797 ± 0.109M/s (drops 0.000 ± 0.000M/s)
helper-8 2.786 ± 0.025M/s (drops 0.000 ± 0.000M/s)
no-helper-32 2.399 ± 0.011M/s (drops 0.000 ± 0.000M/s)
helper-32 2.703 ± 0.002M/s (drops 0.000 ± 0.000M/s)
no-helper-64 2.020 ± 0.015M/s (drops 0.000 ± 0.000M/s)
helper-64 2.702 ± 0.073M/s (drops 0.000 ± 0.000M/s)
no-helper-128 1.604 ± 0.001M/s (drops 0.000 ± 0.000M/s)
helper-128 2.516 ± 0.002M/s (drops 0.000 ± 0.000M/s)
no-helper-512 0.699 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-512 2.106 ± 0.003M/s (drops 0.000 ± 0.000M/s)
no-helper-2048 0.215 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-2048 1.223 ± 0.003M/s (drops 0.000 ± 0.000M/s)
no-helper-4095 0.112 ± 0.000M/s (drops 0.000 ± 0.000M/s)
helper-4095 0.796 ± 0.000M/s (drops 0.000 ± 0.000M/s)
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-4-houtao1@huawei.com
|
|
Fix checkpatch error: "ERROR: Bad function definition - void foo()
should probably be void foo(void)". Most replacements are done by
the following command:
sed -i 's#\([a-z]\)()$#\1(void)#g' testing/selftests/bpf/benchs/*.c
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211210141652.877186-3-houtao1@huawei.com
|
|
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
|
|
Currently, the single test program, debugfs.sh, contains all test cases
for DAMON. When one of the cases fails, finding which case is failed
from the test log is not so easy, and all remaining tests will be
skipped. To improve the situation, this commit splits the single
program into small test programs having their own names.
Link: https://lkml.kernel.org/r/20211201150440.1088-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface users were able to trigger warning by writing
some files with arbitrarily large 'count' parameter. The issue is fixed
with commit db7a347b26fe ("mm/damon/dbgfs: use '__GFP_NOWARN' for
user-specified size buffer allocation"). This commit adds a test case
for the issue in DAMON selftests to avoid future regressions.
Link: https://lkml.kernel.org/r/20211201150440.1088-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A patch titled "mm/damon/schemes: add the validity judgment of
thresholds"[1] makes DAMON debugfs interface to validate DAMON scheme
inputs. This commit adds a test case for the validation logic in DAMON
selftests.
[1] https://lore.kernel.org/linux-mm/d78360e52158d786fcbf20bc62c96785742e76d3.1637239568.git.xhao@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211201150440.1088-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs didn't check empty targets when starting monitoring, and
the issue is fixed with commit b5ca3e83ddb0 ("mm/damon/dbgfs: add
adaptive_targets list check before enable monitor_on"). To avoid future
regression, this commit adds a test case for that in DAMON selftests.
Link: https://lkml.kernel.org/r/20211201150440.1088-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Testing the DAMON debugfs files while DAMON is running makes no sense,
as any write to the debugfs files will fail. This commit makes the test
be skipped in this case.
Link: https://lkml.kernel.org/r/20211201150440.1088-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vm tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from timens tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definition from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from adi-test and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from seccomp_benchmark and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from net tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from common.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from ir_loopback.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from close_range_test.c and pickup the one defined
in kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from cgroup_util.h and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vec-syscfg.c and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
tools/include/linux/kernel.h and kselftest_harness.h are missing
ifndef guard around ARRAY_SIZE define. Fix them to avoid duplicate
define errors during compile when another file defines it. This
problem was found when compiling selftests that include a header
with ARRAY_SIZE define.
ARRAY_SIZE is defined in several selftests. There are about 25+
duplicate defines in various selftests source and header files.
Add ARRAY_SIZE to kselftest.h in preparation for removing duplicate
ARRAY_SIZE defines from individual test files.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building selftests/cgroup: with clang the following error are seen:
clang -Wall -pthread test_memcontrol.c cgroup_util.c ../clone3/clone3_selftests.h -o .../builds/current/kselftest/cgroup/test_memcontrol
clang: error: cannot specify -o when generating multiple output files
make[3]: *** [../lib.mk:146: .../builds/current/kselftest/cgroup/test_memcontrol] Error 1
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
Mark Brown
Kumar Kartikeya Dwivedi
Danielle Ratson
Jean-Philippe Brucker
Daniel Latypov
David Gow
Jiri Olsa
Hangbin Liu
Willem de Bruijn
Andrii Nakryiko
David Ahern
Po-Hsu Lin
Jaroslav Kysela
Takashi Sakamoto
Hou Tao
Linus Torvalds
SeongJae Park
Shuah Khan
Jakub Kicinski
Anders Roxell