aboutsummaryrefslogtreecommitdiffstats
path: root/tools/vm/slabinfo.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-23radix-tree: fix radix_tree_iter_retry() for tagged iterators.Andrey Ryabinin1-0/+1
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23mm: memcontrol: fix cgroup creation failure after many small jobsJohannes Weiner3-24/+87
The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: John Garcia <john.garcia@mesosphere.io> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Cc: <stable@vger.kernel.org> [3.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-22netfilter: connlabels: move set helper to xt_connlabelFlorian Westphal3-32/+16
xt_connlabel is the only user so move it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22netfilter: conntrack: support a fixed size of 128 distinct labelsFlorian Westphal6-40/+18
The conntrack label extension is currently variable-sized, e.g. if only 2 labels are used by iptables rules then the labels->bits[] array will only contain one element. We track size of each label storage area in the 'words' member. But in nftables and openvswitch we always have to ask for worst-case since we don't know what bit will be used at configuration time. As most arches are 64bit we need to allocate 24 bytes in this case: struct nf_conn_labels { u8 words; /* 0 1 */ /* XXX 7 bytes hole, try to pack */ long unsigned bits[2]; /* 8 24 */ Make bits a fixed size and drop the words member, it simplifies the code and only increases memory requirements on x86 when less than 64bit labels are required. We still only allocate the extension if its needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann1-2/+5
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu1-2/+2
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-22ixgbe: cleanup crosstalk fixDon Skidmore4-41/+72
This patch address a few issues with the initial crosstalk fix. Most important of which is the SDP that indicates the presents of a SFP+ module changes between HW types. With this change that is taken in to consideration It also moves the check closer to the base code that checks link. This makes it so we only need to do the check in one spot. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: remove redundant check on ret_valColin Ian King1-3/+0
The last check on ret_val is redundant since ret_val has not changed since the previous check, so remove it as it is extraneous. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Commonize mailbox write/readTony Nguyen1-29/+6
With changes to ixgbevf_write_msg_read_ack(), other functions are performing the same operations done here; change those functions to utilize ixgbevf_write_msg_read_ack(). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ovl: verify upper dentry in ovl_remove_and_whiteout()Maxim Patlasov1-30/+24
The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-22ixgbevf: Add range checking for setting MTUTony Nguyen3-21/+40
Currently when setting the VF's MTU, the PF can return a NACK but this isn't passed on to the VF. Propagate the results from the PF to the VF so errors can be reported. In ixgbevf_change_mtu, return an error and reject the change. For ixgbevf_configure_rx, log the error for debugging purposes since the function is buried in a series of Rx config routines that are void. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Protect ixgbevf_reset_subtask from remove eventDon Skidmore1-0/+1
In ixgbevf_reset_subtask We weren't verifying that the port haven't been removed, we are with this patch. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Add missing destroy_workqueue() on error in ixgbe_init_module()Wei Yongjun1-0/+1
Add the missing destroy_workqueue() before return from ixgbe_init_module() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Add lock around ixgbevf_reinit_locked callDon Skidmore1-0/+2
The function ixgbevf_reinit_locked() assumes you have the rtnl lock however we didn't when calling from the service task. This patch corrects that. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: fix setup_fc for x550emEmil Tantilov1-2/+2
mac->ops.setup_fc can be null for backplanes which can cause the driver to crash on load. Reported-by: Patrick McLean <patrickm@gaikai.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: add VF support for new hardwareDon Skidmore5-0/+11
This patch add VF support for the new X553 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Fix minor typo while freeing irqBabu Moger1-1/+1
The array subscript increments after the execution of the statement. So there is no issue here. However it helps to read the code better. Signed-off-by: Babu Moger <babu.moger@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbe: Change register variable to unsignedDon Skidmore1-1/+1
I noticed this variable used for register reads wasn't an unsigned so this patch corrects that. I don't believe this was causing any issue as is but this is more consistent with the rest of the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: bump version numberDon Skidmore1-1/+1
Bump the version number to more closely match the function included in the driver. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: Correct parameter sent to LED functionDon Skidmore2-2/+14
The second parameter of these functions is the index to the led we are interested in affecting. However we were mistakenly passing the offset in the register. This patch corrects that and adds some bonds checking which would hopefully make bugs like this more noticeable in the future. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22ixgbevf: fix NACK check in ixgbevf_set_uc_addr_vf()Emil Tantilov1-6/+8
Fix the NACK check in ixgbevf_set_uc_addr_vf() for instances where index != 0. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Explicitly write platform-specific mac address after PF resetTushar Dave1-38/+49
i40e PF reset clears mac filters. If platform-specific mac address is used, driver has to explicitly write default mac address to mac filters otherwise all incoming traffic destined to default mac address will be dropped after reset. This issue was found on SPARC while toggling i40e ntuple via ethtool. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: add missing link advertise settingStefan Assmann1-0/+1
Adding the missing link advertise for some X710 NICs. This can be observed by simply calling ethtool on the interface. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported [...] With fix applied. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 10000baseT/Full [...] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Move the mutex lock in i40e_client_unregisterCatherine Sullivan1-2/+2
We need to lock the client list around the i40e_client_release call to prevent the release from interrupting the client instances while they are being added. Change-Id: I99993f20179aaf8730207833e7d0869d2ccffa1d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove redundant memsetAmitoj Kaur Chawla1-1/+0
Remove redundant call to memset before a call to memcpy. The Coccinelle semantic patch used to make this change is as follows: @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari2-2/+2
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: refactor Rx filter handlingMitch Williams3-279/+261
Properly track filter adds and deletes so the driver doesn't lose filters during resets and up/down cycles. Add a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Implement a simple state machine so the driver can track the status of each filter throughout its lifecycle. Properly manage the overflow promiscuous state for the each VSI, and provide a way for the driver to detect when to exit overflow promiscuous mode. Remove all possible default MAC filters that the firmware may have set up so that the driver can manage these correctly, particularly when VLANs come into play. Remove the LAA flag for filters; instead just send whatever we get through set_mac to the firmware as the LAA for wakeup purposes. Finally, add the state of each filter to debugfs output so we can see what's going on inside the driver's pointy little head. Change-ID: I97c5e366fac2254fa01eaff4f65c0af61dcf2e1f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40evf: add hyperv dev idsJoshua Hay1-0/+2
This patch adds the Hyper-V specific VF device ids. Change-ID: I9c4fe6d8dfd34f7f68ebc9fdae225c8768439c89 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan5-5/+0
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams2-5/+2
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Fix to show correct Advertised Link Modes when link is downAvinash Dayanand1-19/+28
When link is down, Advertised Link Modes was wrongly displaying full supported link modes instead of Advertised link mode. Added conditional checks in order to make sure correct Advertised link modes are displayed when the link is down. Change-ID: I8a61413f9ee174149c7a33157b5f0b0a8da9842d Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: avoid null pointer dereferenceHeinrich Schuchardt1-1/+3
In function i40e_debug_aq parameter desc is assumed to be possibly NULL. Do not dereference it before checking the value. Fixes: f905dd62be88 ("i40e/i40evf: add max buf len to aq debug print helper") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22packet: propagate sock_cmsg_send() errorSoheil Hassas Yeganeh1-3/+1
sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22macsec: enable GRO and RPS on macsec devicesPaolo Abeni1-7/+25
Use gro_gells to trigger GRO and allow RPS on macsec traffic after decryption. Also, be sure to avoid clearing software offload features in macsec_fix_features(). Overall this increase TCP tput by 30% on recent h/w. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22gro_cells: gro_cells_receive now return error codePaolo Abeni1-6/+5
so that the caller can update stats accordingly, if needed Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20samples: Add an IPv6 '-6' option to the pktgen scriptsMartin KaFai Lau6-11/+26
Add a '-6' option to the sample pktgen scripts for sending out IPv6 packets. [root@kerneldev010.prn1 ~/pktgen]# ./pktgen_sample03_burst_single_flow.sh -i eth0 -s 64 -d fe80::f652:14ff:fec2:a14c -m f4:52:14:c2:a1:4c -b 32 -6 [root@kerneldev011.prn1 ~]# tcpdump -i eth0 -nn -c3 port 9 tcpdump: WARNING: eth0: no IPv4 address assigned tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 14:38:51.815297 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16 14:38:51.815311 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16 14:38:51.815313 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20bpf: make xdp sample variable names more meaningfulBrenden Blanco2-13/+13
The naming choice of index is not terribly descriptive, and dropcnt is in fact incorrect for xdp2. Pick better names for these: ipproto and rxcnt. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20rtnl: protect do_setlink from IFLA_XDP_ATTACHEDBrenden Blanco1-0/+4
The IFLA_XDP_ATTACHED nested attribute is meant for read-only, and while do_setlink properly ignores it, it should be more paranoid and reject commands that try to set it. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/mlx4_en: use READ_ONCE when freeing xdp_progBrenden Blanco1-2/+4
For consistency, and in order to hint at the synchronous nature of the xdp_prog field, use READ_ONCE in the destroy path of the ring. All occurrences should now use either READ_ONCE or xchg. Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21crypto: qat - make qat_asym_algs.o depend on asn1 headersJan Stancek1-0/+1
Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-20net: dsa: mv88e6xxx: kill last locked reg_readVivien Didelot1-16/+19
Get rid of the last usage of the locked mv88e6xxx_reg_read function with a new mv88e6xxx_port_read helper, useful later for chips with different port registers base address. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: dsa: mv88e6xxx: rework EEPROM accessVivien Didelot2-283/+239
The 6352 family of switches and compatibles provide a 8-bit address and 16-bit data access to an optional EEPROM. Newer chip such as the 6390 family slightly changed the access to 16-bit address and 8-bit data. This commit cleans up the EEPROM access code for 16-bit access and makes it easy to eventually introduce future support for 8-bit access. Here's a list of notable changes brought by this patch: - provide Global2 unlocked helpers for EEPROM commands - remove eeprom_mutex, only reg_lock is necessary for driver functions - eeprom_len is 0 for chip without EEPROM, so return it directly - the Running bit must be 0 before r/w, so wait for Busy *and* Running - remove now unused mv88e6xxx_wait and mv88e6xxx_reg_write - other than that, the logic (in _{get,set}_eeprom16) didn't change Chips with an 8-bit EEPROM access will require to implement the 8-suffixed variant of G2 helpers and the related flag: #define MV88E6XXX_FLAGS_EEPROM8 \ (MV88E6XXX_FLAG_G2_EEPROM_CMD | \ MV88E6XXX_FLAG_G2_EEPROM_ADDR) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net: dsa: mv88e6xxx: remove unused phy_mutexVivien Didelot1-6/+0
Only reg_lock is necessary now and phy_mutex is dead. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20net/faraday: Disallow using reversed MAC address from hardwareGavin Shan1-9/+0
The initial MAC address is retrieved from hardware if it's not provided by device-tree. The reserved MAC address from hardware will be used if non-reserved MAC address is invalid. It will cause mismatched MAC address seen by hardware and software. This disallows using the reserved hardware MAC address to avoid the mismatched MAC address seen by hardware and software. Fixes: 113ce107afe9 ("net/faraday: Read MAC address from chip") Suggested-by: David Laight <David.Laight@ACULAB.COM> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20Input: tsc200x - report proper input_dev nameMichael Welling4-6/+25
Passes input_id struct to the common probe function for the tsc200x drivers instead of just the bustype. This allows for the use of the product variable to set the input_dev->name variable according to the type of touchscreen used. Note that when we introduced support for TSC2004 we started calling everything TSC200X, so let's keep this quirk. Signed-off-by: Michael Welling <mwelling@ieee.org> Cc: stable@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-20tty/vt/keyboard: fix OOB access in do_compute_shiftstate()Dmitry Torokhov1-21/+9
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS, which is currently 256, whereas number of keys/buttons in input device (and therefor in key_down) is much larger - KEY_CNT - 768, and that can cause out-of-bound access when we do sym = U(key_maps[0][k]); with large 'k'. To fix it we should not attempt iterating beyond smaller of NR_KEYS and KEY_CNT. Also while at it let's switch to for_each_set_bit() instead of open-coding it. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-21netfilter: nf_tables: allow to filter out rules by table and chainPablo Neira Ayuso1-0/+38
If the table and/or chain attributes are set in a rule dump request, we filter out the rules based on this selection. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-21netfilter: nft_log: fix snaplen does not truncate packetsLiping Zhang1-1/+2
There's a similar problem in xt_NFLOG, and was fixed by commit 7643507fe8b5 ("netfilter: xt_NFLOG: nflog-range does not truncate packets"). Only set copy_len here does not work, so we should enable NF_LOG_F_COPY_LEN also. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-21netfilter: nft_log: check the validity of log levelLiping Zhang1-0/+5
User can specify the log level larger than 7(debug level) via nfnetlink, this is invalid. So in this case, we should report EINVAL to the userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-21netfilter: nft_log: fix possible memory leak if log expr init failLiping Zhang1-8/+18
Suppose that we specify the NFTA_LOG_PREFIX, then NFTA_LOG_LEVEL and NFTA_LOG_GROUP are specified together or nf_logger_find_get call returns fail, i.e. expr init fail, memory leak will happen. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.