| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull x86 fixes from Borislav Petkov:
- Prepare for and clear .brk early in order to address XenPV guests
failures where the hypervisor verifies page tables and uninitialized
data in that range leads to bogus failures in those checks
- Add any potential setup_data entries supplied at boot to the identity
pagetable mappings to prevent kexec kernel boot failures. Usually,
this is not a problem for the normal kernel as those mappings are
part of the initially mapped 2M pages but if kexec gets to allocate
the second kernel somewhere else, those setup_data entries need to be
mapped there too.
- Fix objtool not to discard text references from the __tracepoints
section so that ENDBR validation still works
- Correct the setup_data types limit as it is user-visible, before 5.19
releases
* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix the setup data types max limit
x86/ibt, objtool: Don't discard text references from tracepoint section
x86/compressed/64: Add identity mappings for setup_data entries
x86: Fix .brk attribute in linker script
x86: Clear .brk area at early boot
x86/xen: Use clear_bss() for Xen PV guests
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter, can, and bluetooth.
Current release - regressions:
- bluetooth: fix deadlock on hci_power_on_sync
Previous releases - regressions:
- sched: act_police: allow 'continue' action offload
- eth: usbnet: fix memory leak in error case
- eth: ibmvnic: properly dispose of all skbs during a failover
Previous releases - always broken:
- bpf:
- fix insufficient bounds propagation from
adjust_scalar_min_max_vals
- clear page contiguity bit when unmapping pool
- netfilter: nft_set_pipapo: release elements in clone from
abort path
- mptcp: netlink: issue MP_PRIO signals from userspace PMs
- can:
- rcar_canfd: fix data transmission failed on R-Car V3U
- gs_usb: gs_usb_open/close(): fix memory leak
Misc:
- add Wenjia as SMC maintainer"
* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
wireguard: Kconfig: select CRYPTO_CHACHA_S390
crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
wireguard: selftests: use microvm on x86
wireguard: selftests: always call kernel makefile
wireguard: selftests: use virt machine on m68k
wireguard: selftests: set fake real time in init
r8169: fix accessing unset transport header
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
Revert "tls: rx: move counting TlsDecryptErrors for sync"
mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
mptcp: fix local endpoint accounting
selftests: mptcp: userspace PM support for MP_PRIO signals
mptcp: netlink: issue MP_PRIO signals from userspace PMs
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
net: lan966x: hardcode the number of external ports
...
|
|
On Tue, Jun 28, 2022 at 04:28:58PM +0800, Pengfei Xu wrote:
> # ./ftracetest
> === Ftrace unit tests ===
> [1] Basic trace file check [PASS]
> [2] Basic test for tracers [PASS]
> [3] Basic trace clock test [PASS]
> [4] Basic event tracing check [PASS]
> [5] Change the ringbuffer size [PASS]
> [6] Snapshot and tracing setting [PASS]
> [7] trace_pipe and trace_marker [PASS]
> [8] Test ftrace direct functions against tracers [UNRESOLVED]
> [9] Test ftrace direct functions against kprobes [UNRESOLVED]
> [10] Generic dynamic event - add/remove eprobe events [FAIL]
> [11] Generic dynamic event - add/remove kprobe events
>
> It 100% reproduced in step 11 and then missing ENDBR BUG generated:
> "
> [ 9332.752836] mmiotrace: enabled CPU7.
> [ 9332.788612] mmiotrace: disabled.
> [ 9337.103426] traps: Missing ENDBR: syscall_regfunc+0x0/0xb0
It turns out that while syscall_regfunc() does have an ENDBR when
generated, it gets sealed by objtool's .ibt_endbr_seal list.
Since the only text references to this function:
$ git grep syscall_regfunc
include/linux/tracepoint.h:extern int syscall_regfunc(void);
include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc
include/trace/events/syscalls.h: syscall_regfunc, syscall_unregfunc
kernel/tracepoint.c:int syscall_regfunc(void)
appear in the __tracepoint section which is excluded by objtool.
Fixes: 3c6f9f77e618 ("objtool: Rework ibt and extricate from stack validation")
Reported-by: Pengfei Xu <pengfei.xu@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Yrrepdaow4F5kqG0@hirez.programming.kicks-ass.net
|
|
This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This should be a bit more stable hopefully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.
Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change updates the testing sample (pm_nl_ctl) to exercise
the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to
issue MP_PRIO signals over the selected subflow.
E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003
userspace_pm.sh has a new selftest that invokes this command.
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- BPF program info linear (BPIL) data is accessed assuming 64-bit
alignment resulting in undefined behavior as the data is just byte
aligned. Fix it, Found using -fsanitize=undefined.
- Fix 'perf offcpu' build on old kernels wrt task_struct's
state/__state field.
- Fix perf_event_attr.sample_type setting on the 'offcpu-time' event
synthesized by the 'perf offcpu' tool.
- Don't bail out when synthesizing PERF_RECORD_ events for pre-existing
threads when one goes away while parsing its procfs entries.
- Don't sort the task scan result from /proc, its not needed and
introduces bugs when the main thread isn't the first one to be
processed.
- Fix uninitialized 'offset' variable on aarch64 in the unwind code.
- Sync KVM headers with the kernel sources.
* tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf synthetic-events: Ignore dead threads during event synthesis
perf synthetic-events: Don't sort the task scan result from /proc
perf unwind: Fix unitialized 'offset' variable on aarch64
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf bpf: 8 byte align bpil data
tools kvm headers arm64: Update KVM headers from the kernel sources
perf offcpu: Accept allowed sample types only
perf offcpu: Fix build failure on old kernels
|
|
When it synthesize various task events, it scans the list of task
first and then accesses later. There's a window threads can die
between the two and proc entries may not be available.
Instead of bailing out, we can ignore that thread and move on.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It should not sort the result as procfs already returns a proper
ordering of tasks. Actually sorting the order caused problems that it
doesn't guararantee to process the main thread first.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked
objects") uncovered the following issue on aarch64:
util/unwind-libunwind-local.c: In function 'find_proc_info':
util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
386 | if (ofs > 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
371 | if (ofs <= 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
363 | if (ofs <= 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
In file included from util/libunwind/arm64.c:37:
Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects")
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@cloudflare.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since commit 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in
selftests") the xdp_dummy.o's section name has changed to xdp. But some
tests are still using "section xdp_dummy", which make the tests failed.
Fix them by updating to the new section name.
Fixes: 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.
Before:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 8 usec
stack depth 0
processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
|
|
Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.
Before:
# ./test_verifier 743
#743/p jump & dead code elimination FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 11 usec
stack depth 0
processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 743
#743/p jump & dead code elimination OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
Being lazy does not pay, add the test for various
ordering of tun queue close / detach / destroy.
Link: https://lore.kernel.org/r/20220629181911.372047-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The incorrect path is causing the following error when trying to run net
kselftests:
In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: cf67838c4422 ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To pick the changes in:
bfbab44568779e16 ("KVM: arm64: Implement PSCI SYSTEM_SUSPEND")
7b33a09d036ffd9a ("KVM: arm64: Add support for userspace to suspend a vCPU")
ffbb61d09fc56c85 ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.")
661a20fab7d156cf ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
fde0451be8fb3208 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
28d1629f751c4a5f ("KVM: x86/xen: Kernel acceleration for XENVER_version")
536395260582be74 ("KVM: x86/xen: handle PV timers oneshot mode")
942c2490c23f2800 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID")
2fd6df2f2b47d430 ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
35025735a79eaa89 ("KVM: x86/xen: Support direct injection of event channel events")
That automatically adds support for this new ioctl:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2022-06-28 12:13:07.281150509 -0300
+++ after 2022-06-28 12:13:16.423392896 -0300
@@ -98,6 +98,7 @@
[0xcc] = "GET_SREGS2",
[0xcd] = "SET_SREGS2",
[0xce] = "GET_STATS_FD",
+ [0xd0] = "XEN_HVM_EVTCHN_SEND",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yrs4RE+qfgTaWdAt@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bpil data is accessed assuming 64-bit alignment resulting in undefined
behavior as the data is just byte aligned. With an -fsanitize=undefined
build the following errors are observed:
$ sudo perf record -a sleep 1
util/bpf-event.c:310:22: runtime error: load of misaligned address 0x55f61084520f for type '__u64', which requires 8 byte alignment
0x55f61084520f: note: pointer points here
a8 fe ff ff 3c 51 d3 c0 ff ff ff ff 04 84 d3 c0 ff ff ff ff d8 aa d3 c0 ff ff ff ff a4 c0 d3 c0
^
util/bpf-event.c:311:20: runtime error: load of misaligned address 0x55f61084522f for type '__u32', which requires 4 byte alignment
0x55f61084522f: note: pointer points here
ff ff ff ff c7 17 00 00 f1 02 00 00 1f 04 00 00 58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00
^
util/bpf-event.c:198:33: runtime error: member access within misaligned address 0x55f61084523f for type 'const struct bpf_func_info', which requires 4 byte alignment
0x55f61084523f: note: pointer points here
58 04 00 00 00 00 00 00 0f 00 00 00 63 02 00 00 3b 00 00 00 ab 02 00 00 44 00 00 00 14 03 00 00
Correct this by rouding up the data sizes and aligning the pointers.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20220614014714.1407239-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
2cde51f1e10f2600 ("KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace")
b22216e1a617ca55 ("KVM: arm64: Add vendor hypervisor firmware register")
428fd6788d4d0e0d ("KVM: arm64: Add standard hypervisor firmware register")
05714cab7d63b189 ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers")
18f3976fdb5da2ba ("KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high")
a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/lkml/YrsWcDQyJC+xsfmm@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As offcpu-time event is synthesized at the end, it could not get the
all the sample info. Define OFFCPU_SAMPLE_TYPES for allowed ones and
mask out others in evsel__config() to prevent parse errors.
Because perf sample parsing assumes a specific ordering with the
sample types, setting unsupported one would make it fail to read
data like perf record -d/--data.
Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220624231313.367909-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Old kernels have a 'struct task_struct' which contains a "state" field
and newer kernels have "__state" instead.
While the get_task_state() in the BPF code handles that in some way, it
assumed the current kernel has the new definition and it caused a build
error on old kernels.
We should not assume anything and access them carefully. Do not use
'task struct' directly access it instead using new and old definitions
in a row.
Fixes: edc41a1099c2d08c ("perf record: Enable off-cpu analysis with BPF")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Blake Jones <blakejones@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220624231313.367909-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add tdc test cases to verify new flush behaviour is correct, which do
the following:
- Try to flush only one action which is being referenced by a filter
- Try to flush three actions where the last one (index 3) is being
referenced by a filter
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To pick up the changes from:
d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs")
0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit")
cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support")
That gets these new SVM exit reasons:
+ { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \
+ { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \
+ { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+ { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \
+ { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
This causes these changes:
CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o
LD /tmp/build/perf-urgent/arch/x86/perf-in.o
LD /tmp/build/perf-urgent/arch/perf-in.o
LD /tmp/build/perf-urgent/perf-in.o
LINK /tmp/build/perf-urgent/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID")
2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id")
a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-06-26 12:04:35.982003781 -0300
+++ after 2022-06-26 12:04:43.819972476 -0300
@@ -28,6 +28,7 @@
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
[0x77] = "VDPA_SET_CONFIG_CALL",
+ [0x7C] = "VDPA_SET_GROUP_ASID",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
@@ -39,5 +40,8 @@
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
[0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x7A] = "VDPA_GET_AS_NUM",
+ [0x7B] = "VDPA_GET_VRING_GROUP",
[0x80] = "VDPA_GET_VQS_COUNT",
+ [0x81] = "VDPA_GET_GROUP_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.
Committer notes:
And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:
ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option")
---
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.
This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For some reason using:
cat <<EoFuncBegin
static const char *errno_to_name__$arch(int err)
{
switch (err) {
EoFuncBegin
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
Example:
$ echo "int main() {return 0;}" > prog.c
$ gcc -o prog prog.c
$ perf record --buildid-all ./prog
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
$ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
$ file-buildid prog
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
444ad9be165d8058a48ce2ffb4e9f55854a3293e
$ echo "int main() {return 1;}" > prog.c
$ gcc -o prog prog.c
$ file-buildid prog
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
Before:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
885524d5aaa24008a3e2b06caa3ea95d013c0fc5
$
After:
$ perf buildid-cache --purge $(pwd)/prog
$ perf inject -i perf.data -o junk
$ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
$
Fixes: 454c407ec17a0c63 ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes from:
d6d0c7f681fda1d0 ("x86/cpufeatures: Add PerfMonV2 feature bit")
296d5a17e793956f ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
f30903394eb62316 ("x86/cpufeatures: Add virtual TSC_AUX feature bit")
8ad7e8f696951f19 ("x86/fpu/xsave: Support XSAVEC in the kernel")
59bd54a84d15e933 ("x86/tdx: Detect running as a TDX guest in early boot")
a77d41ac3a0f41c8 ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
ecf8eca51f33dbfd ("drm/i915/xehp: Add compute engine ABI")
991b4de3275728fd ("drm/i915/uapi: Add kerneldoc for engine class enum")
c94fde8f516610b0 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES")
1c671ad753dbbf5f ("drm/i915/doc: Link query items to their uapi structs")
a2e5402691e23269 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc")
462ac1cdf4d7acf1 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc")
034d47b25b2ce627 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB")
78e1fb3112c0ac44 ("drm/i915/uapi: Add query for hwconfig blob")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Free string allocated by asprintf().
Fixes: d8fc08550929bb84 ("perf inject: Keep a copy of kcore_dir")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix a regression with pKVM when kmemleak is enabled
- Add Oliver Upton as an official KVM/arm64 reviewer
selftests:
- deal with compiler optimizations around hypervisor exits
x86:
- MAINTAINERS reorganization
- Two SEV fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV: Init target VMCBs in sev_migrate_from
KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user()
MAINTAINERS: Reorganize KVM/x86 maintainership
selftests: KVM: Handle compiler optimizations in ucall
KVM: arm64: Add Oliver as a reviewer
KVM: arm64: Prevent kmemleak from accessing pKVM memory
tools/kvm_stat: fix display of error when multiple processes are found
|
|
Cover the scenario when we cannot insert a socket into the sockmap, because
it has it is using ULP. Failed insert should not have any effect on the ULP
state. This is a regression test.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220623091231.417138-1-jakub@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments
since its initial conmit. Looks like a typo.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Cc: willemb@google.com
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The selftests, when built with newer versions of clang, is found
to have over optimized guests' ucall() function, and eliminating
the stores for uc.cmd (perhaps due to no immediate readers). This
resulted in the userspace side always reading a value of '0', and
causing multiple test failures.
As a result, prevent the compiler from optimizing the stores in
ucall() with WRITE_ONCE().
Suggested-by: Ricardo Koller <ricarkol@google.com>
Suggested-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Message-Id: <20220615185706.1099208-1-rananta@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in
cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment"
* tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
sock: redo the psock vs ULP protection check
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
net: dsa: qca8k: reduce mgmt ethernet timeout
net: dsa: qca8k: reset cpu port on MTU change
MAINTAINERS: Add a maintainer for OCP Time Card
hinic: Replace memcpy() with direct assignment
Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
...
|
|
Pull Kselftest fixes from Shuah Khan:
"Compile time fixes and run-time resources leaks:
- Fix clang cross compilation
- Fix resource leak when return error
- fix compile error for dma_map_benchmark
- Fix regression - make use of GUP_TEST_FILE macro"
* tag 'linux-kselftest-fixes-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: make use of GUP_TEST_FILE macro
selftests: vm: Fix resource leak when return error
selftests dma: fix compile error for dma_map_benchmark
selftests: Fix clang cross compilation
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use get_random_u32() instead of prandom_u32_state() in nft_meta
and nft_numgen, from Florian Westphal.
2) Incorrect list head in nfnetlink_cttimeout in recent update coming
from previous development cycle. Also from Florian.
3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest.
From Jie2x Zhou.
4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit
netfilter: use get_random_u32 instead of prandom
====================
Link: https://lore.kernel.org/r/20220621085618.3975-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before change:
make -C netfilter
TEST: performance
net,port [SKIP]
perf not supported
port,net [SKIP]
perf not supported
net6,port [SKIP]
perf not supported
port,proto [SKIP]
perf not supported
net6,port,mac [SKIP]
perf not supported
net6,port,mac,proto [SKIP]
perf not supported
net,mac [SKIP]
perf not supported
After change:
net,mac [ OK ]
baseline (drop from netdev hook): 2061098pps
baseline hash (non-ranged entries): 1606741pps
baseline rbtree (match on first field only): 1191607pps
set with 1000 full, ranged entries: 1639119pps
ok 8 selftests: netfilter: nft_concat_range.sh
Fixes: 611973c1e06f ("selftests: netfilter: Introduce tests for sets with range concatenation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Don't set data source if it's not a memory operation in ARM SPE
(Statistical Profiling Extensions).
- Fix handling of exponent floating point values in perf stat
expressions.
- Don't leak fd on failure on libperf open.
- Fix 'perf test' CPU topology test for PPC guest systems.
- Fix undefined behaviour on breakpoint account 'perf test' entry.
- Record only user callchains on the "Check ARM64 callgraphs are
complete in FP mode" 'perf test' entry.
- Fix "perf stat CSV output linter" test on s390.
- Sync batch of kernel headers with tools/perf/.
* tag 'perf-tools-fixes-for-v5.19-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Ensure at least 1 id per metric
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf arm-spe: Don't set data source if it's not a memory operation
perf expr: Allow exponents on floating point values
perf test topology: Use !strncmp(right platform) to fix guest PPC comparision check
perf test: Record only user callchains on the "Check Arm64 callgraphs are complete in fp mode" test
perf beauty: Update copy of linux/socket.h with the kernel sources
perf test: Fix variable length array undefined behavior in bp_account
libperf evsel: Open shouldn't leak fd on failure
perf test: Fix "perf stat CSV output linter" test on s390
perf unwind: Fix uninitialized variable
|
|
Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses")
introduces support for binding to nonlocal addresses, as well as some
basic test coverage for some of the related cases.
Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check")
fixes a regression which incorrectly removed some checks for bind
address validation. In addition, it introduces regression tests for
those specific checks. However, those regression tests are defective, in
that they perform the tests using an incorrect combination of bind
flags. As a result, those tests fail when they should succeed.
This commit introduces additional regression tests for nonlocal binding
and fixes the defective regression tests. It also introduces new
set_sysctl calls for the ipv4_bind test group, as to perform the ICMP
binding tests it is necessary to allow ICMP socket creation by setting
the net.ipv4.ping_group_range knob.
Fixes: b4a028c4d031 ("ipv4: ping: fix bind address validity check")
Reported-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: Riccardo Paolo Bestetti <pbl@bestov.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull build tooling updates from Thomas Gleixner:
- Remove obsolete CONFIG_X86_SMAP reference from objtool
- Fix overlapping text section failures in faddr2line for real
- Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it
with finegrained annotations so objtool can validate that code
correctly.
* tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage
faddr2line: Fix overlapping text section failures, the sequel
objtool: Fix obsolete reference to CONFIG_X86_SMAP
|
Linus Torvalds
Peter Zijlstra
Jason A. Donenfeld
Kishen Maloor
Vladimir Oltean
Namhyung Kim
Ivan Babrou
Hangbin Liu
Jakub Kicinski
Daniel Borkmann
Coleman Dietsch
Mat Martineau
Paolo Abeni
Arnaldo Carvalho de Melo
Ian Rogers
Victor Nogueira
Gang Li
Raul Silvera
Adrian Hunter
Jakub Sitnicki
Dimitris Michailidis
Raghavendra Rao Ananta
Jie2x Zhou
Riccardo Paolo Bestetti