aboutsummaryrefslogtreecommitdiffstats
path: root/tools (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-07-28selftests/seccomp: add xtensa supportMax Filippov1-1/+15
Xtensa syscall number can be obtained and changed through the struct user_pt_regs. Syscall return value register is fixed relatively to the current register window in the user_pt_regs, so it needs a bit of special treatment. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into masterLinus Torvalds3-2/+4
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ...
2020-07-21selftest: txtimestamp: fix net ns entry logicPaolo Pisati1-1/+1
According to 'man 8 ip-netns', if `ip netns identify` returns an empty string, there's no net namespace associated with current PID: fix the net ns entrance logic. Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21s390/cpum_cf,perf: change DFLT_CCERROR counter nameThomas Richter1-1/+1
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-19Merge tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into masterLinus Torvalds3-6/+14
Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI. - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes 'perf record --switch-output-event event-name' usage" * tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools arch kvm: Sync kvm headers with the kernel sources perf tools: Sync hashmap.h with libbpf's libsubcmd: Fix OPT_CALLBACK_SET()
2020-07-18Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into masterLinus Torvalds2-4/+4
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.8: - A fix to the VAS code we merged this cycle, to report the proper error code to userspace for address translation failures. And a selftest update to match. - Another fix for our pkey handling of PROT_EXEC mappings. - A fix for a crash when booting a "secure VM" under an ultravisor with certain numbers of CPUs. Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh Rajendran, Thiago Jung Bauermann" * tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Use proper error code to check fault address powerpc/vas: Report proper error code for address translation failure powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
2020-07-17selftests: net: ip_defrag: modprobe missing nf_defrag_ipv6 supportPaolo Pisati1-0/+2
Fix ip_defrag.sh when CONFIG_NF_DEFRAG_IPV6=m: $ sudo ./ip_defrag.sh + set -e + mktemp -u XXXXXX + readonly NETNS=ns-rGlXcw + trap cleanup EXIT + setup + ip netns add ns-rGlXcw + ip -netns ns-rGlXcw link set lo up + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv4.ipfrag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_high_thresh=9000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_low_thresh=7000000 + ip netns exec ns-rGlXcw sysctl -w net.ipv6.ip6frag_time=1 + ip netns exec ns-rGlXcw sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 + cleanup + ip netns del ns-rGlXcw $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh ls: cannot access '/proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh': No such file or directory $ sudo modprobe nf_defrag_ipv6 $ ls -la /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh -rw-r--r-- 1 root root 0 Jul 14 12:34 /proc/sys/net/netfilter/nf_conntrack_frag6_high_thresh Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17tools arch kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo1-2/+3
To pick up the changes from: 83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17perf tools: Sync hashmap.h with libbpf'sArnaldo Carvalho de Melo1-4/+8
To pick up the changes in: b2f9f1535bb9 ("libbpf: Fix libbpf hashmap on (I)LP32 architectures") Silencing this warning: Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h I'll eventually update the warning to remove the "Kernel ABI" part and instead state libbpf when noticing that the original is at "tools/lib/something". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Jakub Bogusz <qboosh@pld-linux.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-17libsubcmd: Fix OPT_CALLBACK_SET()Ravi Bangoria1-0/+3
Any option macro with _SET suffix should set opt->set variable which is not happening for OPT_CALLBACK_SET(). This is causing issues with perf record --switch-output-event. Fix that. Before: # ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ] After: $ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144542 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144608 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144660 ] ^C[ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144784 ] [ perf record: Woken up 0 times to write data ] [ perf record: Dump perf.data.2020061918144803 ] [ perf record: Captured and wrote 0.419 MB perf.data.<timestamp> ] Fixes: 636eb4d001b1 ("libsubcmd: Introduce OPT_CALLBACK_SET()") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200619133412.50705-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-15selftests/powerpc: Use proper error code to check fault addressHaren Myneni2-4/+4
ERR_NX_TRANSLATION(CSB.CC=5) is for internal to VAS for fault handling and should not used by OS. ERR_NX_AT_FAULT(CSB.CC=250) is the proper error code should be reported by OS when NX encounters address translation failure. This patch uses CC=250 to determine the fault address when the request is not successful. Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0315251705baff94f678c33178491b5008723511.camel@linux.ibm.com
2020-07-14selftests: fib_nexthop_multiprefix: fix cleanup() netns deletionPaolo Pisati1-1/+1
During setup(): ... for ns in h0 r1 h1 h2 h3 do create_ns ${ns} done ... while in cleanup(): ... for n in h1 r1 h2 h3 h4 do ip netns del ${n} 2>/dev/null done ... and after removing the stderr redirection in cleanup(): $ sudo ./fib_nexthop_multiprefix.sh ... TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] Cannot remove namespace file "/run/netns/h4": No such file or directory $ echo $? 1 and a non-zero return code, make kselftests fail (even if the test itself is fine): ... not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1 ... Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds15-48/+166
Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...
2020-07-10Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds5-50/+53
Pull kselftest fixes from Shuah Khan: "TPM2 test changes to run on python3 and kselftest framework fix to incorrect return type" * tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: ksft_test_num return type should be unsigned selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
2020-07-09libbpf: Fix libbpf hashmap on (I)LP32 architecturesJakub Bogusz1-4/+8
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type and returned value was much outside hashmap capacity. As advised by Andrii Nakryiko, this patch uses different hashing variant for architectures with size_t shorter than long long. Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap") Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
2020-07-09selftests: bpf: Fix detach from sockmap testsLorenz Bauer1-6/+6
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour. In the first case, the tests check that detaching without giving a program succeeds. Since these are not the desired semantics, invert the condition. In the second case, the clean up code doesn't supply the necessary program fds. Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
2020-07-09Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds1-0/+36
Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred
2020-07-08selftests: kmod: Add module address visibility testKees Cook1-0/+36
Make sure we don't regress the CAP_SYSLOG behavior of the module address visibility via /proc/modules nor /sys/module/*/sections/*. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08Raise gcc version requirement to 4.9Linus Torvalds1-2/+1
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9 is a much better minimum version to target. We have a number of workarounds for actual bugs in pre-4.9 gcc versions (including things like internal compiler errors on ARM), but we also have some syntactic workarounds for lacking features. In particular, raising the minimum to 4.9 means that we can now just assume _Generic() exists, which is likely the much better replacement for a lot of very convoluted built-time magic with conditionals on sizeof and/or __builtin_choose_expr() with same_type() etc. Using _Generic also means that you will need to have a very recent version of 'sparse', but thats easy to build yourself, and much less of a hassle than some old gcc version can be. The latest (in a long string) of reasons for minimum compiler version upgrades was commit 5435f73d5c4a ("efi/x86: Fix build with gcc 4"). Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on old RHEL versions persumably also don't build their own kernels anyway. And maybe they should cross-built or just have a little side affair with a newer compiler? Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-07Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds15-40/+123
Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Intel PT fixes for PEBS-via-PT with registers - Fixes for Intel PT python based GUI - Avoid duplicated sideband events with Intel PT in system wide tracing - Remove needless 'dummy' event from TUI menu, used when synthesizing meta data events for pre-existing processes - Fix corner case segfault when pressing enter in a screen without entries in the TUI for report/top - Fixes for time stamp handling in libtraceevent - Explicitly set utf-8 encoding in perf flamegraph - Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy', silencing perf build warning * tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf report TUI: Remove needless 'dummy' event from menu perf intel-pt: Fix PEBS sample for XMM registers perf intel-pt: Fix displaying PEBS-via-PT with registers perf intel-pt: Fix recording PEBS-via-PT with registers perf report TUI: Fix segmentation fault in perf_evsel__hists_browse() tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling tools lib traceevent: Add API to read time information from kbuffer perf scripts python: exported-sql-viewer.py: Fix time chart call tree perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result perf record: Fix duplicated sideband events with Intel PT system wide tracing perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' perf flamegraph: Explicitly set utf-8 encoding
2020-07-06kselftest: ksft_test_num return type should be unsignedPaolo Bonzini1-1/+1
Fixes a compiler warning: In file included from sync_test.c:37: ../kselftest.h: In function ‘ksft_print_cnts’: ../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare] if (ksft_plan != ksft_test_num()) ^~ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06ipv6: fib6_select_path can not use out path for nexthop objectsDavid Ahern1-0/+13
Brian reported a crash in IPv6 code when using rpfilter with a setup running FRR and external nexthop objects. The root cause of the crash is fib6_select_path setting fib6_nh in the result to NULL because of an improper check for nexthop objects. More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif set causing fib6_select_path to be called with have_oif_match set. fib6_select_path has early check on have_oif_match and jumps to the out label which presumes a builtin fib6_nh. This path is invalid for nexthop objects; for external nexthops fib6_select_path needs to just return if the fib6_nh has already been set in the result otherwise it returns after the call to nexthop_path_fib6_result. Update the check on have_oif_match to not bail on external nexthops. Update selftests for this problem. Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by: Brian Rak <brak@choopa.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3Pengfei Xu4-49/+52
Python 2 is no longer supported by the Python upstream project, so upgrade TPM2 tests to Python 3. Fixed minor merge conflicts Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Pengfei Xu <pengfei.xu@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06perf report TUI: Remove needless 'dummy' event from menuArnaldo Carvalho de Melo1-1/+18
Fixing the common case of: perf record perf report And getting just the cycles events. We now have a 'dummy' event to get perf metadata events that take place while we synthesize metadata records for pre-existing processes by traversing procfs, so we always have this extra 'dummy' evsel, but we don't have to offer it as there will be no samples on it, remove this distraction. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06perf intel-pt: Fix PEBS sample for XMM registersAdrian Hunter1-2/+3
The condition to add XMM registers was missing, the regs array needed to be in the outer scope, and the size of the regs array was too small. Fixes: 143d34a6b387b ("perf intel-pt: Add XMM registers to synthesized PEBS sample") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06perf intel-pt: Fix displaying PEBS-via-PT with registersAdrian Hunter1-1/+1
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g. # perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l ... [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data ] # ./perf script --itrace=eop -F+iregs Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field. Fix by using allow_user_set, which is true when recording AUX area data. Fixes: 9e64cefe4335b ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06perf intel-pt: Fix recording PEBS-via-PT with registersAdrian Hunter2-2/+3
When recording PEBS-via-PT, the kernel will not accept the intel_pt event with register sampling e.g. # perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l Error: intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fix by suppressing register sampling on the intel_pt evsel. Committer notes: Adrian informed that this is only available from Tremont onwards, so on older processors the error continues the same as before. Fixes: 9e64cefe4335b ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-06perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()Wei Li1-6/+11
The segmentation fault can be reproduced as following steps: 1) Executing perf report in tui. 2) Typing '/xxxxx' to filter the symbol to get nothing matched. 3) Pressing enter with no entry selected. Then it will report a segmentation fault. It is caused by the lack of check of browser->he_selection when accessing it's member res_samples in perf_evsel__hists_browse(). These processes are meaningful for specified samples, so we can skip these when nothing is selected. Fixes: 4968ac8fb7c3 ("perf report: Implement browsing of individual samples") Signed-off-by: Wei Li <liwei391@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Link: http://lore.kernel.org/lkml/20200612094322.39565-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-05Merge tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds7-90/+78
Pull x86 fixes from Thomas Gleixner: "A series of fixes for x86: - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space value. - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly whitelisted for split lock detection. Some CPUs which do not support it crash even when the MSR is written to 0 which is the default value. - Fix the XEN PV fallout of the entry code rework - Fix the 32bit fallout of the entry code rework - Add more selftests to ensure that these entry problems don't come back. - Disable 16 bit segments on XEN PV. It's not supported because XEN PV does not implement ESPFIX64" * tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER selftests/x86: Consolidate and fix get/set_eflags() helpers selftests/x86/syscall_nt: Clear weird flags after each test selftests/x86/syscall_nt: Add more flag combinations x86/entry/64/compat: Fix Xen PV SYSENTER frame setup x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C x86/entry: Assert that syscalls are on the right stack x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
2020-07-04x86/entry, selftests: Further improve user entry sanity checksAndy Lutomirski1-0/+11
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/881de09e786ab93ce56ee4a2437ba2c308afe7a9.1593795633.git.luto@kernel.org
2020-07-03tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handlingTom Zanussi1-6/+9
Kernel commit dc4e2801d400 (ring-buffer: Redefine the unimplemented RINGBUF_TYPE_TIME_STAMP) changed the way the ring buffer timestamps work - after that commit the previously unimplemented RINGBUF_TYPE_TIME_STAMP type causes the time delta to be used as a timestamp rather than a delta to be added to the timestamp. The trace-cmd code didn't get updated to handle this, so misinterprets the event data for this case, which causes a cascade of errors, including trace-report not being able to identify synthetic (or any other) events generated by the histogram code (which uses TIME_STAMP mode). For example, the following triggers along with the trace-cmd shown cause an UNKNOWN_EVENT error and trace-cmd report crash: # echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > /sys/kernel/debug/tracing/synthetic_events # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_wakeup/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).trace(wakeup_latency,$wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > /sys/kernel/debug/tracing/events/sched/sched_switch/trigger # echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger # trace-cmd record -e wakeup_latency -e sched_wakeup -f comm==\"ping\" ping localhost -c 5 # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 ug! no event found for type 0 [UNKNOWN TYPE 0] ug! no event found for type 11520 Segmentation fault (core dumped) After this patch we get the correct interpretation and the events are shown properly: # trace-cmd report CPU 0 is empty CPU 1 is empty CPU 2 is empty CPU 3 is empty CPU 5 is empty CPU 6 is empty CPU 7 is empty cpus=8 <idle>-0 [004] 23284.341392: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23284.341464: wakeup_latency: lat=58, pid=12031, comm=ping <idle>-0 [004] 23285.365303: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23285.365382: wakeup_latency: lat=64, pid=12031, comm=ping <idle>-0 [004] 23286.389290: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23286.389378: wakeup_latency: lat=72, pid=12031, comm=ping <idle>-0 [004] 23287.413213: sched_wakeup: ping:12031 [120] success=1 CPU:004 <idle>-0 [004] 23287.413291: wakeup_latency: lat=64, pid=12031, comm=ping Link: http://lkml.kernel.org/r/1567628224.13841.4.camel@kernel.org Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-3-tz.stoyanov@gmail.com Signed-off-by: Tom Zanussi <zanussi@kernel.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.785094515@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools lib traceevent: Add API to read time information from kbufferSteven Rostedt (Red Hat)2-0/+30
Add the functions kbuffer_subbuf_timestamp() and kbuffer_ptr_delta() to get the timing data stored in the ring buffer that is used to produced the time stamps of the records. This is useful for tools like trace-cmd to be able to display the content of the read data to understand why the records show the time stamps that they do. Link: http://lore.kernel.org/linux-trace-devel/20200625100516.365338-2-tz.stoyanov@gmail.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [ Ported from trace-cmd.git ] Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200702185703.619656282@goodmis.org Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix time chart call treeAdrian Hunter1-0/+4
Using Python version 3.8.2 and PySide2 version 5.14.0, time chart call tree would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Charts -> Time chart by CPU Move mouse over middle of chart Right-click and select Show Call Tree Before: displays Call Tree but not expanded to selected time After: displays Call Tree expanded to selected time Fixes: e69d5df75d74d ("perf scripts python: exported-sql-viewer.py: Add ability for Call tree to open at a specified task and time") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' resultAdrian Hunter1-1/+2
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Call Tree Press: Ctrl-F Enter: unknown Press: Enter Before: displays 'unknown' not found After: tree is expanded to line showing 'unknown' Fixes: ae8b887c00d3f ("perf scripts python: exported-sql-viewer.py: Add call tree") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' resultAdrian Hunter1-1/+2
Using ctrl-F ('Find') would not find 'unknown' because it matches id zero. Fix by excluding id zero from selection. Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph Press: Ctrl-F Enter: unknown Press: Enter Before: gets stuck After: tree is expanded to line showing 'unknown' Fixes: 254c0d820b86d ("perf scripts python: exported-sql-viewer.py: Factor out CallGraphModelBase") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' resultAdrian Hunter1-0/+1
Using Python version 3.8.2 and PySide2 version 5.14.0, ctrl-F ('Find') would not expand the tree to the result. Fix by using setExpanded(). Example: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.034 MB perf.data ] $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py perf.data.db branches calls 2020-06-26 15:32:14.928997 Creating database ... 2020-06-26 15:32:14.933971 Writing records... 2020-06-26 15:32:15.535251 Adding indexes 2020-06-26 15:32:15.542993 Dropping unused tables 2020-06-26 15:32:15.549716 Done $ python3 ~/libexec/perf-core/scripts/python/exported-sql-viewer.py perf.data.db Select: Reports -> Context-Sensitive Call Graph or Reports -> Call Tree Press: Ctrl-F Enter: main Press: Enter Before: line showing 'main' does not display After: tree is expanded to line showing 'main' Fixes: ebd70c7dc2f5f ("perf scripts python: exported-sql-viewer.py: Add ability to find symbols in the call-graph") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf record: Fix duplicated sideband events with Intel PT system wide tracingAdrian Hunter5-16/+29
Commit 0a892c1c9472 ("perf record: Add dummy event during system wide synthesis") reveals an issue with Intel PT system wide tracing. Specifically that Intel PT already adds a dummy tracking event, and it is not the first event. Adding another dummy tracking event causes duplicated sideband events. Fix by checking for an existing dummy tracking event first. Example showing duplicated switch events: Before: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.895 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 swapper 0 [007] 6390.516222: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [007] 6390.516223: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516224: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 rcu_sched 11 [007] 6390.516227: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [007] 6390.516228: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [002] 6390.516415: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 swapper 0 [002] 6390.516416: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 5556/5559 After: # perf record -a -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.868 MB perf.data ] # perf script --no-itrace --show-switch-events | head swapper 0 [005] 6450.567013: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 7179/7181 perf 7181 [005] 6450.567014: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 perf 7181 [005] 6450.567028: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.567029: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 7179/7181 swapper 0 [005] 6450.571699: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.571700: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 rcu_sched 11 [005] 6450.571702: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [005] 6450.571703: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11/11 swapper 0 [005] 6450.579703: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11/11 rcu_sched 11 [005] 6450.579704: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200629091955.17090-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03perf scripts python: export-to-postgresql.py: Fix struct.pack() int argumentAdrian Hunter1-1/+1
Python 3.8 is requiring that arguments being packed as integers are also integers. Add int() accordingly. Before: $ perf record -e intel_pt//u uname $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:10.547256 Creating database... 2020-06-25 16:09:10.733185 Writing to intermediate files... Traceback (most recent call last): File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1106, in synth_data cbr(id, raw_buf) File "/home/ahunter/libexec/perf-core/scripts/python/export-to-postgresql.py", line 1058, in cbr value = struct.pack("!hiqiiiiii", 4, 8, id, 4, cbr, 4, MHz, 4, percent) struct.error: required argument is not an integer Fatal Python error: problem in Python trace event handler Python runtime state: initialized Current thread 0x00007f35d3695780 (most recent call first): <no Python frame> Aborted (core dumped) After: $ dropdb perf_data_db $ rm -rf perf_data_db-perf-data $ perf script --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-postgresql.py perf_data_db branches calls 2020-06-25 16:09:40.990267 Creating database... 2020-06-25 16:09:41.207009 Writing to intermediate files... 2020-06-25 16:09:41.270915 Copying to database... 2020-06-25 16:09:41.382030 Removing intermediate files... 2020-06-25 16:09:41.384630 Adding primary keys 2020-06-25 16:09:41.541894 Adding foreign keys 2020-06-25 16:09:41.677044 Dropping unused tables 2020-06-25 16:09:41.703761 Done Fixes: aba44287a224 ("perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200629091955.17090-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'Arnaldo Carvalho de Melo1-0/+4
To bring in the change made in this cset: e3a9e681adb7 ("x86/entry: Fixup bad_iret vs noinstr") This doesn't cause any functional changes to tooling, just a rebuild. Addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-03Merge remote-tracking branch 'torvalds/master' into perf/urgentArnaldo Carvalho de Melo37-107/+631
To synchronize UAPI headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-07-02Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds2-9/+4
Pull kselftest fixes from Shuah Khan: "tpm test fixes from Jarkko Sakkinen" * tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tpm: Use /bin/sh instead of /bin/bash selftests: tpm: Use 'test -e' instead of 'test -f' Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"
2020-07-02Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds5-6/+19
Pull kunit fixes from Shuah Khan "Fixes for build and run-times failures. Also includes troubleshooting tips updates to kunit user documentation" * tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Documentation: kunit: Add some troubleshooting tips to the FAQ kunit: kunit_tool: Fix invalid result when build fails kunit: show error if kunit results are not present kunit: kunit_config: Fix parsing of CONFIG options with space
2020-07-01selftests/x86: Consolidate and fix get/set_eflags() helpersAndy Lutomirski7-90/+51
There are several copies of get_eflags() and set_eflags() and they all are buggy. Consolidate them and fix them. The fixes are: Add memory clobbers. These are probably unnecessary but they make sure that the compiler doesn't move something past one of these calls when it shouldn't. Respect the redzone on x86_64. There has no failure been observed related to this, but it's definitely a bug. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/982ce58ae8dea2f1e57093ee894760e35267e751.1593191971.git.luto@kernel.org
2020-07-01selftests/x86/syscall_nt: Clear weird flags after each testAndy Lutomirski1-0/+1
Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.org
2020-07-01selftests/x86/syscall_nt: Add more flag combinationsAndy Lutomirski1-0/+15
Add EFLAGS.AC to the mix. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/12924e2fe2c5826568b7fc9436d85ca7f5eb1743.1593191971.git.luto@kernel.org
2020-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller12-38/+139
Daniel Borkmann says: ==================== pull-request: bpf 2020-06-30 The following pull-request contains BPF updates for your *net* tree. We've added 28 non-merge commits during the last 9 day(s) which contain a total of 35 files changed, 486 insertions(+), 232 deletions(-). The main changes are: 1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer types, from Yonghong Song. 2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki. 3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb internals and integrate it properly into DMA core, from Christoph Hellwig. 4) Fix RCU splat from recent changes to avoid skipping ingress policy when kTLS is enabled, from John Fastabend. 5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its position masking to work, from Andrii Nakryiko. 6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading of network programs, from Maciej Żenczykowski. 7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer. 8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30bpf: Add tests for PTR_TO_BTF_ID vs. null comparisonYonghong Song3-1/+45
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison, one for PTR_TO_BTF_ID in the ctx structure and the other for PTR_TO_BTF_ID after one level pointer chasing. In both cases, the test ensures condition is not removed. For example, for this test struct bpf_fentry_test_t { struct bpf_fentry_test_t *a; }; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) { if (arg == 0) test7_result = 1; return 0; } Before the previous verifier change, we have xlated codes: int test7(long long unsigned int * ctx): ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 0: (79) r1 = *(u64 *)(r1 +0) ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 1: (b4) w0 = 0 2: (95) exit After the previous verifier change, we have: int test7(long long unsigned int * ctx): ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 0: (79) r1 = *(u64 *)(r1 +0) ; if (arg == 0) 1: (55) if r1 != 0x0 goto pc+4 ; test7_result = 1; 2: (18) r1 = map[id:6][0]+48 4: (b7) r2 = 1 5: (7b) *(u64 *)(r1 +0) = r2 ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 6: (b4) w0 = 0 7: (95) exit Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
2020-06-30selftests: bpf: Pass program to bpf_prog_detach in flow_dissectorLorenz Bauer1-2/+2
Calling bpf_prog_detach is incorrect, since it takes target_fd as its argument. The intention here is to pass it as attach_bpf_fd, so use bpf_prog_detach2 and pass zero for target_fd. Fixes: 06716e04a043 ("selftests/bpf: Extend test_flow_dissector to cover link creation") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200629095630.7933-7-lmb@cloudflare.com
2020-06-30selftests: bpf: Pass program and target_fd in flow_dissector_reattachLorenz Bauer1-6/+6
Pass 0 as target_fd when attaching and detaching flow dissector. Additionally, pass the expected program when detaching. Fixes: 1f043f87bb59 ("selftests/bpf: Add tests for attaching bpf_link to netns") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200629095630.7933-6-lmb@cloudflare.com
2020-06-30selftests/bpf: Test updating flow_dissector link with same programJakub Sitnicki1-4/+28
This case, while not particularly useful, is worth covering because we expect the operation to succeed as opposed when re-attaching the same program directly with PROG_ATTACH. While at it, update the tests summary that fell out of sync when tests extended to cover links. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.