aboutsummaryrefslogtreecommitdiffstats
path: root/tools (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds8-18/+55
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-19mm/gup_benchmark: add a missing "w" to getopt stringJohn Hubbard1-1/+1
Even though gup_benchmark.c has code to handle the -w command-line option, the "w" is not part of the getopt string. It looks as if it has been missing the whole time. On my machine, this leads naturally to the following predictable result: $ sudo ./gup_benchmark -w ./gup_benchmark: invalid option -- 'w' ...which is fixed with this commit. Link: http://lkml.kernel.org/r/20191014184639.1512873-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: kbuild test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-0/+8
Pull virtio fixes from Michael Tsirkin: "Some minor bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/test: stop device before reset tools/virtio: xen stub tools/virtio: more stubs
2019-10-13tools/virtio: xen stubMichael S. Tsirkin1-0/+6
Fixes test module build. Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-12Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds38-99/+315
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also a couple of updates for new Intel models (which are technically hw-enablement, but to users it's a fix to perf behavior on those new CPUs - hope this is fine), an AUX inheritance fix, event time-sharing fix, and a fix for lost non-perf NMI events on AMD systems" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/x86/cstate: Add Tiger Lake CPU support perf/x86/msr: Add Tiger Lake CPU support perf/x86/intel: Add Tiger Lake CPU support perf/x86/cstate: Update C-state counters for Ice Lake perf/x86/msr: Add new CPU model numbers for Ice Lake perf/x86/cstate: Add Comet Lake CPU support perf/x86/msr: Add Comet Lake CPU support perf/x86/intel: Add Comet Lake CPU support perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp perf/core: Fix corner case in perf_rotate_context() perf/core: Rework memory accounting in perf_mmap() perf/core: Fix inheritance of aux_output groups perf annotate: Don't return -1 for error when doing BPF disassembly perf annotate: Return appropriate error code for allocation failures perf annotate: Fix arch specific ->init() failure errors perf annotate: Propagate the symbol__annotate() error return perf annotate: Fix the signedness of failure returns perf annotate: Propagate perf_env__arch() error perf evsel: Fall back to global 'perf_env' in perf_evsel__env() perf tools: Propagate get_cpuid() error ...
2019-10-12Merge tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-1/+1
Pull powerpc fixes from Michael Ellerman: "Fix a kernel crash in spufs_create_root() on Cell machines, since the new mount API went in. Fix a regression in our KVM code caused by our recent PCR changes. Avoid a warning message about a failing hypervisor API on systems that don't have that API. A couple of minor build fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Desnes A. Nunes do Rosario, Emmanuel Nicolet, Jordan Niethe, Laurent Dufour, Stephen Rothwell" * tag 'powerpc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: spufs: fix a crash in spufs_create_root() powerpc/kvm: Fix kvmppc_vcore->in_guest value in kvmhv_switch_to_host selftests/powerpc: Fix compile error on tlbie_test due to newer gcc powerpc/pseries: Remove confusing warning message. powerpc/64s/radix: Fix build failure with RADIX_MMU=n
2019-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller8-18/+55
Alexei Starovoitov says: ==================== pull-request: bpf 2019-10-12 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) a bunch of small fixes. Nothing critical. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11tools/virtio: more stubsMichael S. Tsirkin2-0/+2
fix test module build. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-09selftests/powerpc: Fix compile error on tlbie_test due to newer gccDesnes A. Nunes do Rosario1-1/+1
Newer versions of GCC (>= 9) demand that the size of the string to be copied must be explicitly smaller than the size of the destination. Thus, the NULL char has to be taken into account on strncpy. This will avoid the following compiling error: tlbie_test.c: In function 'main': tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size strncpy(logdir, optarg, LOGDIR_NAME_SIZE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
2019-10-08selftests/bpf: More compatible nc options in test_lwt_ip_encapJiri Benc1-3/+3
Out of the three nc implementations widely in use, at least two (BSD netcat and nmap-ncat) do not support -l combined with -s. Modify the nc invocation to be accepted by all of them. Fixes: 17a90a788473 ("selftests/bpf: test that GSO works in lwt_ip_encap") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/9f177682c387f3f943bb64d849e6c6774df3c5b4.1570539863.git.jbenc@redhat.com
2019-10-08selftests/bpf: Set rp_filter in test_flow_dissectorJiri Benc1-0/+3
Many distributions enable rp_filter. However, the flow dissector test generates packets that have 1.1.1.1 set as (inner) source address without this address being reachable. This causes the selftest to fail. The selftests should not assume a particular initial configuration. Switch off rp_filter. Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Link: https://lore.kernel.org/bpf/513a298f53e99561d2f70b2e60e2858ea6cda754.1570539863.git.jbenc@redhat.com
2019-10-08Merge tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds5-8/+79
Pull Kselftest fixes from Shuah Khan: "Fixes for existing tests and the framework. Cristian Marussi's patches add the ability to skip targets (tests) and exclude tests that didn't build from run-list. These patches improve the Kselftest results. Ability to skip targets helps avoid running tests that aren't supported in certain environments. As an example, bpf tests from mainline aren't supported on stable kernels and have dependency on bleeding edge llvm. Being able to skip bpf on systems that can't meet this llvm dependency will be helpful. Kselftest can be built and installed from the main Makefile. This change help simplify Kselftest use-cases which addresses request from users. Kees Cook added per test timeout support to limit individual test run-time" * tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: watchdog: Add command line option to show watchdog_info selftests: watchdog: Validate optional file argument selftests/kselftest/runner.sh: Add 45 second timeout per test kselftest: exclude failed TARGETS from runlist kselftest: add capability to skip chosen TARGETS selftests: Add kselftest-all and kselftest-install targets
2019-10-07Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgentIngo Molnar38-99/+315
Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf script: Andi Kleen: - Fix recovery from LBR/binary mismatch in the "brstackinsn" --field. perf annotate: Arnaldo Carvalho de Melo: - Propagate errors so that meaningful messages can be presented to the user in case of problems. perf map: Steve MacLean: - Fix handling of maps partially overlapped, resolving symbols in the ranges not replaced by new mmaps. perf tests: Ian Rogers: - Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions. perf LLVM: Ian Rogers: - Don't access out-of-scope array. perf inject: Steve MacLean: - Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit snprintf format and also a missing ".so" suffix in another case. libsubcmd: Ian Rogers: - Make _FORTIFY_SOURCE defines dependent on the feature, avoiding false positives with with memory sanitizers such as LLVM's ASan. Vendor specific events: Intel: Andi Kleen: - Fix period for Intel fixed counters. s390: Thomas Richter (2): - Fix some event details transaction for machine type 8561. tools headers UAPI: Arnaldo Carvalho de Melo: - Sync headers with the kernel, catching new usbdevfs ioctls and madvise behaviours to properly decode in 'perf trace' output. Documentation: Steve MacLean: - Correct and clarify jitdump spec. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-12/+5
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ...
2019-10-04selftests/net: add nettest to .gitignoreJakub Kicinski1-0/+1
nettest is missing from gitignore. Fixes: acda655fefae ("selftests: Add nettest") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-5/+379
Pull KVM fixes from Paolo Bonzini: "ARM and x86 bugfixes of all kinds. The most visible one is that migrating a nested hypervisor has always been busted on Broadwell and newer processors, and that has finally been fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: x86: omit "impossible" pmu MSRs from MSR list KVM: nVMX: Fix consistency check on injected exception error code KVM: x86: omit absent pmu MSRs from MSR list selftests: kvm: Fix libkvm build error kvm: vmx: Limit guest PMCs to those supported on the host kvm: x86, powerpc: do not allow clearing largepages debugfs entry KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF selftests: kvm: add test for dirty logging inside nested guests KVM: x86: fix nested guest live migration with PML KVM: x86: assign two bits to track SPTE kinds KVM: x86: Expose XSAVEERPTR to the guest kvm: x86: Enumerate support for CLZERO instruction kvm: x86: Use AMD CPUID semantics for AMD vCPUs kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH KVM: X86: Fix userspace set invalid CR4 kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH arm64: KVM: Kill hyp_alternate_select() ...
2019-10-03udp: only do GSO if # of segs > 1Josh Hunt1-12/+4
Prior to this change an application sending <= 1MSS worth of data and enabling UDP GSO would fail if the system had SW GSO enabled, but the same send would succeed if HW GSO offload is enabled. In addition to this inconsistency the error in the SW GSO case does not get back to the application if sending out of a real device so the user is unaware of this failure. With this change we only perform GSO if the # of segments is > 1 even if the application has enabled segmentation. I've also updated the relevant udpgso selftests. Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Josh Hunt <johunt@akamai.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03selftests: kvm: Fix libkvm build errorShuah Khan1-1/+1
Fix the following build error from "make TARGETS=kvm kselftest": libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC This error is seen when build is done from the main Makefile using kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS are defined. When build is invoked using: "make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS aren't defined. There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the check to determine if --no-pie is necessary, which is the case when these two aren't defined when "make -C tools/testing/selftests/kvm" runs. Fix it by simplifying the no-pie-option logic. With this change, both build variations work. "make TARGETS=kvm kselftest" "make -C tools/testing/selftests/kvm" Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-02selftests: watchdog: Add command line option to show watchdog_infoGeorge G. Davis1-1/+15
With the new ioctl(WDIOC_GETSUPPORT) call in place, add a command line option to show the watchdog_info. Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-10-02selftests: watchdog: Validate optional file argumentGeorge G. Davis1-0/+11
The newly added optional file argument does not validate if the file is indeed a watchdog, e.g.: ./watchdog-test -f /dev/zero Watchdog Ticking Away! Fix it by confirming that the WDIOC_GETSUPPORT ioctl succeeds. Fixes: a4864a33f56caa ("selftests: watchdog: Add optional file argument") Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-10-02selftests/bpf: test_progs: Don't leak server_fd in test_sockopt_inheritBrian Vazquez1-1/+1
server_fd needs to be closed if pthread can't be created. Fixes: e3e02e1d9c24 ("selftests/bpf: test_progs: convert test_sockopt_inherit") Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20191001173728.149786-3-brianvv@google.com
2019-10-02selftests/bpf: test_progs: Don't leak server_fd in tcp_rttBrian Vazquez1-1/+2
server_fd needs to be closed if pthread can't be created. Fixes: 8a03222f508b ("selftests/bpf: test_progs: fix client/server race in tcp_rtt") Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20191001173728.149786-2-brianvv@google.com
2019-10-01selftests/kselftest/runner.sh: Add 45 second timeout per testKees Cook2-3/+34
Commit a745f7af3cbd ("selftests/harness: Add 30 second timeout per test") solves the problem of kselftest_harness.h-using binary tests possibly hanging forever. However, scripts and other binaries can still hang forever. This adds a global timeout to each test script run. To make this configurable (e.g. as needed in the "rtc" test case), include a new per-test-directory "settings" file (similar to "config") that can contain kselftest-specific settings. The first recognized field is "timeout". Additionally, this splits the reporting for timeouts into a specific "TIMEOUT" not-ok (and adds exit code reporting in the remaining case). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-10-01kselftest: exclude failed TARGETS from runlistCristian Marussi1-0/+4
A TARGET which failed to be built/installed should not be included in the runlist generated inside the run_kselftest.sh script. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-10-01kselftest: add capability to skip chosen TARGETSCristian Marussi1-0/+7
Let the user specify an optional TARGETS skiplist through the new optional SKIP_TARGETS Makefile variable. It is easier to skip at will using a reduced and well defined list of possibly problematic targets with SKIP_TARGETS than to provide a partially stripped down list of good targets using the usual TARGETS variable. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-10-01selftests: Add kselftest-all and kselftest-install targetsShuah Khan2-4/+8
Add kselftest-all target to build tests from the top level Makefile. This is to simplify kselftest use-cases for CI and distributions where build and test systems are different. Current kselftest target builds and runs tests on a development system which is a developer use-case. Add kselftest-install target to install tests from the top level Makefile. This is to simplify kselftest use-cases for CI and distributions where build and test systems are different. This change addresses requests from developers and testers to add support for installing kselftest from the main Makefile. In addition, make the install directory the same when install is run using "make kselftest-install" or by running kselftest_install.sh. Also fix the INSTALL_PATH variable conflict between main Makefile and selftests Makefile. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30libbpf: handle symbol versioning properly for libbpf.aYonghong Song3-11/+36
bcc uses libbpf repo as a submodule. It brings in libbpf source code and builds everything together to produce shared libraries. With latest libbpf, I got the following errors: /bin/ld: libbcc_bpf.so.0.10.0: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2 /bin/ld: failed to set dynamic section sizes: Bad value collect2: error: ld returned 1 exit status make[2]: *** [src/cc/libbcc_bpf.so.0.10.0] Error 1 In xsk.c, we have asm(".symver xsk_umem__create_v0_0_2, xsk_umem__create@LIBBPF_0.0.2"); asm(".symver xsk_umem__create_v0_0_4, xsk_umem__create@@LIBBPF_0.0.4"); The linker thinks the built is for LIBBPF but cannot find proper version LIBBPF_0.0.2/4, so emit errors. I also confirmed that using libbpf.a to produce a shared library also has issues: -bash-4.4$ cat t.c extern void *xsk_umem__create; void * test() { return xsk_umem__create; } -bash-4.4$ gcc -c -fPIC t.c -bash-4.4$ gcc -shared t.o libbpf.a -o t.so /bin/ld: t.so: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2 /bin/ld: failed to set dynamic section sizes: Bad value collect2: error: ld returned 1 exit status -bash-4.4$ Symbol versioning does happens in commonly used libraries, e.g., elfutils and glibc. For static libraries, for a versioned symbol, the old definitions will be ignored, and the symbol will be an alias to the latest definition. For example, glibc sched_setaffinity is versioned. -bash-4.4$ readelf -s /usr/lib64/libc.so.6 | grep sched_setaffinity 756: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2.3.3 757: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_2.3.4 1800: 0000000000000000 0 FILE LOCAL DEFAULT ABS sched_setaffinity.c 4228: 00000000000e2e70 455 FUNC LOCAL DEFAULT 13 __sched_setaffinity_new 4648: 000000000013d3d0 13 FUNC LOCAL DEFAULT 13 __sched_setaffinity_old 7338: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2 7380: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_ -bash-4.4$ For static library, the definition of sched_setaffinity aliases to the new definition. -bash-4.4$ readelf -s /usr/lib64/libc.a | grep sched_setaffinity File: /usr/lib64/libc.a(sched_setaffinity.o) 8: 0000000000000000 455 FUNC GLOBAL DEFAULT 1 __sched_setaffinity_new 12: 0000000000000000 455 FUNC WEAK DEFAULT 1 sched_setaffinity For both elfutils and glibc, additional macros are used to control different handling of symbol versioning w.r.t static and shared libraries. For elfutils, the macro is SYMBOL_VERSIONING (https://sourceware.org/git/?p=elfutils.git;a=blob;f=lib/eu-config.h). For glibc, the macro is SHARED (https://sourceware.org/git/?p=glibc.git;a=blob;f=include/shlib-compat.h;hb=refs/heads/master) This patch used SHARED as the macro name. After this patch, the libbpf.a has -bash-4.4$ readelf -s libbpf.a | grep xsk_umem__create 372: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_4 405: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create 499: 00000000000175eb 103 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_2 -bash-4.4$ No versioned symbols for xsk_umem__create. The libbpf.a can be used to build a shared library succesfully. -bash-4.4$ cat t.c extern void *xsk_umem__create; void * test() { return xsk_umem__create; } -bash-4.4$ gcc -c -fPIC t.c -bash-4.4$ gcc -shared t.o libbpf.a -o t.so -bash-4.4$ Fixes: 10d30e301732 ("libbpf: add flags to umem config") Cc: Kevin Laatz <kevin.laatz@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-09-30selftests: pidfd: Fix undefined reference to pthread_create()Shuah Khan1-1/+1
Fix build failure: undefined reference to `pthread_create' collect2: error: ld returned 1 exit status Fix CFLAGS to include pthread correctly. Fixes: 740378dc7834 ("pidfd: add polling selftests") Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190924195237.30519-1-skhan@linuxfoundation.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2019-09-30perf annotate: Don't return -1 for error when doing BPF disassemblyArnaldo Carvalho de Melo2-4/+17
Return errno when open_memstream() fails and add two new speciall error codes for when an invalid, non BPF file or one without BTF is passed to symbol__disassemble_bpf(), so that its callers can rely on symbol__strerror_disassemble() to convert that to a human readable error message that can help figure out what is wrong, with hints even. Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Song Liu <songliubraving@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Return appropriate error code for allocation failuresArnaldo Carvalho de Melo1-2/+2
We should return errno or the annotation extra range understood by symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM instead. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Fix arch specific ->init() failure errorsArnaldo Carvalho de Melo6-8/+20
They are called from symbol__annotate() and to propagate errors that can help understand the problem make them return what symbol__strerror_disassemble() known, i.e. errno codes and other annotation specific errors in a special, out of errnos, range. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Propagate the symbol__annotate() error returnArnaldo Carvalho de Melo1-1/+1
We were just returning -1 in symbol__annotate() when symbol__annotate() failed, propagate its error as it is used later to pass to symbol__strerror_disassemble() to present a error message to the user, that in some cases were getting: "Invalid -1 error code" Fix it to propagate the error. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Fix the signedness of failure returnsArnaldo Carvalho de Melo1-1/+1
Callers of symbol__annotate() expect a errno value or some other extended error value range in symbol__strerror_disassemble() to convert to a proper error string, fix it when propagating a failure to find the arch specific annotation routines via arch__find(arch_name). Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf annotate: Propagate perf_env__arch() errorArnaldo Carvalho de Melo1-1/+1
The callers of symbol__annotate2() use symbol__strerror_disassemble() to convert its failure returns into a human readable string, so propagate error values from functions it calls, starting with perf_env__arch() that when fails the right thing to do is to look at 'errno' to see why its possible call to uname() failed. Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf evsel: Fall back to global 'perf_env' in perf_evsel__env()Arnaldo Carvalho de Melo2-1/+8
I.e. if evsel->evlist or evsel->evlist->env isn't set, return the environment for the running machine, as that would be set if reading from a perf.data file. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-uqq4grmhbi12rwb0lfpo6lfu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf tools: Propagate get_cpuid() errorArnaldo Carvalho de Melo4-9/+13
For consistency, propagate the exact cause for get_cpuid() to have failed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf jevents: Fix period for Intel fixed countersAndi Kleen1-6/+6
The Intel fixed counters use a special table to override the JSON information. During this override the period information from the JSON file got dropped, which results in inst_retired.any and similar running with frequency mode instead of a period. Just specify the expected period in the table. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf script brstackinsn: Fix recovery from LBR/binary mismatchAndi Kleen1-1/+5
When the LBR data and the instructions in a binary do not match the loop printing instructions could get confused and print a long stream of bogus <bad> instructions. The problem was that if the instruction decoder cannot decode an instruction it ilen wasn't initialized, so the loop going through the basic block would continue with the previous value. Harden the code to avoid such problems: - Make sure ilen is always freshly initialized and is 0 for bad instructions. - Do not overrun the code buffer while printing instructions - Print a warning message if the final jump is not on an instruction boundary. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf docs: Correct and clarify jitdump specSteve MacLean1-2/+2
Specification claims latest version of jitdump file format is 2. Current jit dump reading code treats 1 as the latest version. Correct spec to match code. The original language made it unclear the value to be written in the magic field. Revise language that the writer always writes the same value. Specify that the reader uses the value to detect endian mismatches. Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com> Acked-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf inject jit: Fix JIT_CODE_MOVE filenameSteve MacLean1-3/+3
During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records with an incorrect filename. Specifically it was missing the ".so" suffix. Further the JIT_CODE_LOAD record were silently truncating the jr->load.code_index field to 32 bits before generating the filename. Make both records emit the same filename based on the full 64 bit code_index field. Fixes: 9b07e27f88b9 ("perf inject: Add jitdump mmap injection support") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf map: Fix overlapped map handlingSteve MacLean1-0/+3
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new entry. If a new map overlaps a previous map, the overlapped section of the previous map is effectively unmapped, but the non-overlapping sections are still valid. maps__fixup_overlappings() is responsible for creating any new map entries from the previously overlapped map. It optionally creates a before and an after map. When creating the after map the existing code failed to adjust the map.pgoff. This meant the new after map would incorrectly calculate the file offset for the ip. This results in incorrect symbol name resolution for any ip in the after region. Make maps__fixup_overlappings() correctly populate map.pgoff. Add an assert that new mapping matches old mapping at the beginning of the after map. Committer-testing: Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9 (which didn't strip symbols). Preparation: ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol cd perfSymbol ~/dotnet3.0-preview9/dotnet publish perf record ~/dotnet3.0-preview9/dotnet \ bin/Debug/netcoreapp3.0/publish/perfSymbol.dll ^C Before: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.705249: 250000 cpu-clock: \ 7fe6159a1f99 [unknown] \ (.../3.0.0-preview9-19423-09/libcoreclr.so) After: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so All the [unknown] symbols were resolved. Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com> Tested-by: Brian Robbins <brianrob@microsoft.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf vendor events s390: Use s390 machine name instead of type 8561Thomas Richter6-1/+1
In the pmu-events directory for JSON file definitions use the official machine name IBM z15 instead of machine type number 8561. This is consistent with previous machines. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20190927081147.18345-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf vendor events s390: Add JSON transaction for machine type 8561Thomas Richter1-0/+7
Add s390 transaction counter definition for machine 8561. This is the same file as for the predecessor machine. Fixes: 6e67d77d673d ("perf vendor events s390: Add JSON files for machine type 8561") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20190927081147.18345-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30perf llvm: Don't access out-of-scope arrayIan Rogers1-3/+3
The 'test_dir' variable is assigned to the 'release' array which is out-of-scope 3 lines later. Extend the scope of the 'release' array so that an out-of-scope array isn't accessed. Bug detected by clang's address sanitizer. Fixes: 07bc5c699a3d ("perf tools: Make fetch_kernel_version() publicly available") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30tools headers kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo5-2/+17
To pick the changes in: 200824f55eef ("KVM: s390: Disallow invalid bits in kvm_valid_regs and kvm_dirty_regs") 4a53d99dd0c2 ("KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode") 7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason") 92f35b751c71 ("KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE") None of them trigger any changes in tooling, this time this is just to silence these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h' diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Liran Alon <liran.alon@oracle.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Link: https://lkml.kernel.org/n/tip-akuugvvjxte26kzv23zp5d2z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30tools headers uapi: Sync linux/fs.h with the kernel sourcesArnaldo Carvalho de Melo3-51/+186
To pick the changes from: 78a1b96bcf7a ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl") 23c688b54016 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies") 5dae460c2292 ("fscrypt: v2 encryption policy support") 5a7e29924dac ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl") b1c0ec3599f4 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl") 22d94f493bfb ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl") 3b6df59bc4d2 ("fscrypt: use FSCRYPT_* definitions, not FS_*") 2336d0deb2d4 ("fscrypt: use FSCRYPT_ prefix for uapi constants") 7af0ab0d3aab ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>") That don't trigger any changes in tooling, as it so far is used only for: $ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex= tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*' tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*' tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*" tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*" $ This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30tools headers uapi: Sync linux/usbdevice_fs.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+4
To pick up the changes from: 4ed3350539aa ("USB: usbfs: Add a capability flag for runtime suspend") 7794f486ed0b ("usbfs: Add ioctls for runtime power management") This triggers these changes in the kernel sources, automagically supporting these new ioctls in the 'perf trace' beautifiers. Soon this will be used in things like filter expressions for tracepoints in 'perf record', 'perf trace', 'perf top', i.e. filter expressions will do a lookup to turn things like USBDEVFS_WAIT_FOR_RESUME into _IO('U', 35) before associating the tracepoint expression to tracepoint perf event. $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before $ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h $ git diff diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h index 78efe870c2b7..cf525cddeb94 100644 --- a/tools/include/uapi/linux/usbdevice_fs.h +++ b/tools/include/uapi/linux/usbdevice_fs.h @@ -158,6 +158,7 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_MMAP 0x20 #define USBDEVFS_CAP_DROP_PRIVILEGES 0x40 #define USBDEVFS_CAP_CONNINFO_EX 0x80 +#define USBDEVFS_CAP_SUSPEND 0x100 /* USBDEVFS_DISCONNECT_CLAIM flags & struct */ @@ -223,5 +224,8 @@ struct usbdevfs_streams { * extending size of the data returned. */ #define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) +#define USBDEVFS_FORBID_SUSPEND _IO('U', 33) +#define USBDEVFS_ALLOW_SUSPEND _IO('U', 34) +#define USBDEVFS_WAIT_FOR_RESUME _IO('U', 35) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after $ diff -u before after --- before 2019-09-27 11:41:50.634867620 -0300 +++ after 2019-09-27 11:42:07.453102978 -0300 @@ -24,6 +24,9 @@ [30] = "DROP_PRIVILEGES", [31] = "GET_SPEED", [32] = "CONNINFO_EX", + [33] = "FORBID_SUSPEND", + [34] = "ALLOW_SUSPEND", + [35] = "WAIT_FOR_RESUME", [3] = "RESETEP", [4] = "SETINTERFACE", [5] = "SETCONFIGURATION", $ This addresses the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h' diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-x1rb109b9nfi7pukota82xhj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30tools headers uapi: Sync asm-generic/mman-common.h with the kernelArnaldo Carvalho de Melo1-0/+3
To pick the changes from: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT") 9c276cc65a58 ("mm: introduce MADV_COLD") That result in these changes in the tools: $ tools/perf/trace/beauty/madvise_behavior.sh > before $ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h $ git diff diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h index 63b1f506ea67..c160a5354eb6 100644 --- a/tools/include/uapi/asm-generic/mman-common.h +++ b/tools/include/uapi/asm-generic/mman-common.h @@ -67,6 +67,9 @@ #define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */ #define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */ +#define MADV_COLD 20 /* deactivate these pages */ +#define MADV_PAGEOUT 21 /* reclaim these pages */ + /* compatibility flags */ #define MAP_FILE 0 $ tools/perf/trace/beauty/madvise_behavior.sh > after $ diff -u before after --- before 2019-09-27 11:29:43.346320100 -0300 +++ after 2019-09-27 11:30:03.838570439 -0300 @@ -16,6 +16,8 @@ [17] = "DODUMP", [18] = "WIPEONFORK", [19] = "KEEPONFORK", + [20] = "COLD", + [21] = "PAGEOUT", [100] = "HWPOISON", [101] = "SOFT_OFFLINE", }; $ I.e. now when madvise gets those behaviours as args, it will be able to translate from the number to a human readable string. This addresses the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h' diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-n40y6c4sa49p29q6sl8w3ufx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-30Merge tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds1-1/+1
Pull tracing fixes from Steven Rostedt: "A few more tracing fixes: - Fix a buffer overflow by checking nr_args correctly in probes - Fix a warning that is reported by clang - Fix a possible memory leak in error path of filter processing - Fix the selftest that checks for failures, but wasn't failing - Minor clean up on call site output of a memory trace event" * tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix same probe error test mm, tracing: Print symbol name for call_site in trace events tracing: Have error path in predicate_parse() free its allocated memory tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro tracing/probe: Fix to check the difference of nr_args before adding probe
2019-09-30tools: bpf: Use !building_out_of_srctree to determine srctreeShuah Khan2-2/+10
make TARGETS=bpf kselftest fails with: Makefile:127: tools/build/Makefile.include: No such file or directory When the bpf tool make is invoked from tools Makefile, srctree is cleared and the current logic check for srctree equals to empty string to determine srctree location from CURDIR. When the build in invoked from selftests/bpf Makefile, the srctree is set to "." and the same logic used for srctree equals to empty is needed to determine srctree. Check building_out_of_srctree undefined as the condition for both cases to fix "make TARGETS=bpf kselftest" build failure. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org