| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the user specifies a MAILTO, but the MAILER is not supported, then
kill the test.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The option MAIL_PATH lets the user decide how to find the mailer they are
using. For example, sendmail is usually located in /usr/sbin but is not
always in the path of non admin users. Have ktest look through the user's
PATH environment variable (adding /usr/sbin) as well, but if that's not good
enough, allow the user to define where to find the mailer.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
squash to mail exec
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If the user doesn't want to send mail, then don't bother them with output
that says they didn't specify a mailer. That can be annoying.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A block of email options is added under the optional config section.
Link: http://lkml.kernel.org/r/1522094884-22718-5-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Users should get emails when the script dies because of a critical failure.
Critical failures are defined as any errors that could abnormally terminate
the script.
In order to add email support, this patch converts all die() to dodie() except:
* when '-v' is used as an option to get the version of the script.
* in Sig-Int handeler because it's not a fatal error to cancel the script.
* errors happen during parsing config
Link: http://lkml.kernel.org/r/1522094884-22718-4-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
User can cancel tests and specify handler's behavior using option
'EMAIL_WHEN_CANCELED'.
Link: http://lkml.kernel.org/r/1522094884-22718-3-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Users can define optional variables to get email notifications.
Ktest can send emails when the script:
* was started
* failed with fatal errors and called dodie()
* completed all testing
Users have to setup the mailer provided in config prior to using this script.
Supported mailers: mailx, mail, sendmail
mailer specific routines are _sendmail_send(), _mailx_send()
Link: http://lkml.kernel.org/r/1522094884-22718-2-git-send-email-tianyang.chen@oracle.com
Suggested-by: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If a config-bisect was interrupted, then allow the user to continue, or
restart a new config-bisect.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Just looking for config-bisect.pl in the source tree can be risky,
especially, if the source tree being tested doesn't have config-bisect.pl in
place. Instead, allow the user to set where to find config-bisect.pl with a
new option CONFIG_BISECT_EXEC.
If this option is not set, by default, ktest.pl will look for
config-bisect.pl in the following locations:
`pwd`/config-bisect.pl # where ktest.pl was called from
`dirname /path/to/ktest.pl`/config-bisect.pl # where ktest.pl exists
${BUILD_DIR}/tools/testing/ktest/config-bisect.pl
# where config-bisect.pl exists in the source tree.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If config-bisect.pl sees that a config_bisect has already been started, it
will ask on the command line if it should bisect or not. This will mess up
running config_bisect from ktest.pl.
Have ktest.pl pass in '-r' to config-bisect.pl and have config-bisect.pl
recognize that to reset without asking.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Check to see if diffconfig is available and use that to diff the configs
instead of using 'diff -u', as diffconfig produces much better output of
kernel config files. It checks the source directory for the executable.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When commands are run in ktest, they are only displayed in the ktest log
file, but that is not sufficient for outputting the display for config
bisects. The result of a config bisect is not shown.
Add a way to display the output of "run_command" which is the subroutine
used by ktest to execute commands. Use this feature to display the output of
config-bisect.pl executions to see the progress as well as the result.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Reduce code duplication and take advantage of bisection logic
improvements by calling config-bisect.pl.
The output of make oldconfig is now copied directly to the desired file,
rather than doing assign_configs+save_config, in order to preserve the
ordering so that diffing the configs at the end will provide useful
output.
Link: http://lkml.kernel.org/r/20170717001630.10518-8-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
[ Modified to use with new version of config-bisect.pl ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Started working on a stand alone program that can do a config bisect. It is
based on the config bisect code of ktest.pl. Instead of needing all the
infrastructure of ktest.pl, all that is required for config-bisect.pl is two
config files. One that works, and one that does not. The goal is to pass in
the two files, and it will create a new "good" and a new "bad" config file
based on input from the user. After several iterations (calls to this
program), it will eventually end with a minimum config value that allows one
config to work and the other config to break.
The program uses a technique that takes the good config and then makes half
of the configs that differ from the bad config just like the bad config.
The code will use make oldconfig to make sure the configs that are set are
not all converted back due to incorrect dependencies on other configs set in
the bad config but not in the new test config.
This is still a work in progress, but as it was written while I was working
at Red Hat, I want this code to be submitted as such.
Signed-off-by: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
|
|
Currently setting do_not_reboot is triggered by simple builds and bisect
builds, but not config bisect builds.
Link: http://lkml.kernel.org/r/20170717001630.10518-3-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Rather than adding a third copy of the same logic, rework it to cover
all three buildonly cases at once.
In the future, please consider using the same variable to perform the
same function regardless of context...
Link: http://lkml.kernel.org/r/20170717001630.10518-2-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
ktest.pl will read any file as long as its name is specified as the first
argument on the command line. Comment this fact in sample.conf.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Simply telling a new user to edit "the config file" without giving any
hints on where that file should go, what it should be named, or where
a template can be found, is not particularly helpful.
Link: http://lkml.kernel.org/r/20170717001630.10518-1-swood@redhat.com
Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Before ktest issues a reboot, it will try to connect to the target machine
to make sure that it is still alive. If the target does not respond within 5
seconds, it will power cycle the box instead of issuing a reboot.
Five seconds may be too short, and ktest may unnecessarially power cycle the
box. I have found 25 seconds seems to be a better timeout for this purpose.
But even 25 may be too arbitrary. Add a CONNECT_TIMEOUT option to let the
user determine the timeout time before rebooting. By default, it has been
raised to 25 seconds.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
To clean up the console processes that are forked to monitor the console,
there needs to be a waitpid().
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull x86/pti updates from Thomas Gleixner:
"Another set of melted spectrum updates:
- Iron out the last late microcode loading issues by actually
checking whether new microcode is present and preventing the CPU
synchronization to run into a timeout induced hang.
- Remove Skylake C2 from the microcode blacklist according to the
latest Intel documentation
- Fix the VM86 POPF emulation which traps if VIP is set, but VIF is
not. Enhance the selftests to catch that kind of issue
- Annotate indirect calls/jumps for objtool on 32bit. This is not a
functional issue, but for consistency sake its the right thing to
do.
- Fix a jump label build warning observed on SPARC64 which uses 32bit
storage for the code location which is casted to 64 bit pointer w/o
extending it to 64bit first.
- Add two new cpufeature bits. Not really an urgent issue, but
provides them for both x86 and x86/kvm work. No impact on the
current kernel"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Fix CPU synchronization routine
x86/microcode: Attempt late loading only when new microcode is present
x86/speculation: Remove Skylake C2 from Speculation Control microcode blacklist
jump_label: Fix sparc64 warning
x86/speculation, objtool: Annotate indirect calls/jumps for objtool on 32-bit kernels
x86/vm86/32: Fix POPF emulation
selftests/x86/entry_from_vm86: Add test cases for POPF
selftests/x86/entry_from_vm86: Exit with 1 if we fail
x86/cpufeatures: Add Intel PCONFIG cpufeature
x86/cpufeatures: Add Intel Total Memory Encryption cpufeature
|
|
POPF is currently broken -- add tests to catch the error. This
results in:
[RUN] POPF with VIP set and IF clear from vm86 mode
[INFO] Exited vm86 mode due to STI
[FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf)
because POPF currently fails to check IF before reporting a pending
interrupt.
This patch also makes the FAIL message a bit more informative.
Reported-by: Bart Oldeman <bartoldeman@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/a16270b5cfe7832d6d00c479d0f871066cbdb52b.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix a logic error that caused the test to exit with 0 even if test
cases failed.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bartoldeman@gmail.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/b1cc37144038958a469c8f70a5f47a6a5638636a.1521003603.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull x86/pti updates from Thomas Gleixner:
"Yet another pile of melted spectrum related updates:
- Drop native vsyscall support finally as it causes more trouble than
benefit.
- Make microcode loading more robust. There were a few issues
especially related to late loading which are now surfacing because
late loading of the IB* microcodes addressing spectre issues has
become more widely used.
- Simplify and robustify the syscall handling in the entry code
- Prevent kprobes on the entry trampoline code which lead to kernel
crashes when the probe hits before CR3 is updated
- Don't check microcode versions when running on hypervisors as they
are considered as lying anyway.
- Fix the 32bit objtool build and a coment typo"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix kernel crash when probing .entry_trampoline code
x86/pti: Fix a comment typo
x86/microcode: Synchronize late microcode loading
x86/microcode: Request microcode on the BSP
x86/microcode/intel: Look into the patch cache first
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode: Get rid of struct apply_microcode_ctx
x86/spectre_v2: Don't check microcode versions when running under hypervisors
x86/vsyscall/64: Drop "native" vsyscalls
x86/entry/64/compat: Save one instruction in entry_INT80_compat()
x86/entry: Do not special-case clone(2) in compat entry
x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
x86/syscalls: Use proper syscall definition for sys_ioperm()
x86/entry: Remove stale syscall prototype
x86/syscalls/32: Simplify $entry == $compat entries
objtool: Fix 32-bit build
|
|
Pull perf updates from Thomas Gleixner:
"Another set of perf updates:
- Fix a Skylake Uncore event format declaration
- Prevent perf pipe mode from crahsing which was caused by a missing
buffer allocation
- Make the perf top popup message which tells the user that it uses
fallback mode on older kernels a debug message.
- Make perf context rescheduling work correcctly
- Robustify the jump error drawing in perf browser mode so it does
not try to create references to NULL initialized offset entries
- Make trigger_on() robust so it does not enable the trigger before
everything is set up correctly to handle it
- Make perf auxtrace respect the --no-itrace option so it does not
try to queue AUX data for decoding.
- Prevent having different number of field separators in CVS output
lines when a counter is not supported.
- Make the perf kallsyms man page usage behave like it does for all
other perf commands.
- Synchronize the kernel headers"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix ctx_event_type in ctx_resched()
perf tools: Fix trigger class trigger_on()
perf auxtrace: Prevent decoding when --no-itrace
perf stat: Fix CVS output format for non-supported counters
tools headers: Sync x86's cpufeatures.h
tools headers: Sync copy of kvm UAPI headers
perf record: Fix crash in pipe mode
perf annotate browser: Be more robust when drawing jump arrows
perf top: Fix annoying fallback message on older kernels
perf kallsyms: Fix the usage on the man page
perf/x86/intel/uncore: Fix Skylake UPI event format
|
|
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.
---------------------------
running userfaultfd_hugetlb
---------------------------
invalid MiB
Usage: <MiB> <bounces>
[FAIL]
Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.
[zhijianx.li@intel.com: update changelog/comments and variable name]
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull powerpc fixes from Michael Ellerman:
"One notable fix to properly advertise our support for a new firmware
feature, caused by two series conflicting semantically but not
textually.
There's a new ioctl for the new ocxl driver, which is not a fix, but
needed to complete the userspace API and good to have before the
driver is in a released kernel.
Finally three minor selftest fixes, and a fix for intermittent build
failures for some obscure platforms, caused by a missing make
dependency.
Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"
* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix vector5 in ibm architecture vector table
ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
ocxl: Add get_metadata IOCTL to share OCXL information to userspace
selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
selftests/powerpc: Fix missing clean of pmu/lib.o
powerpc/boot: Fix random libfdt related build errors
selftests/powerpc: Skip tm-trap if transactional memory is not enabled
|
|
Since Linux v3.2, vsyscalls have been deprecated and slow. From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".
"emulate" is the default. All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow. In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls. (This is in contrast to vDSO functions,
which can be much faster than syscalls.) In "none" mode, there are
no vsyscalls.
For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation. It's been over six
years, and nothing has gone wrong. Delete it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit
host. This also simplifies read_retpoline_hints() a bit and makes its
implementation similar to most of the other annotation reading
functions.
Reported-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b5bc2231b8ad ("objtool: Add retpoline validation")
Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)
$ perf record -e intel_pt//u -S sleep 1
perf: Segmentation fault
Obtained 16 stack frames.
/home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
/home/ahunter/bin/perf() [0x43a45b]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
/home/ahunter/bin/perf() [0x4ec6c9]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4eca15]
/home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
/home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
/home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
/home/ahunter/bin/perf() [0x4a11ae]
/home/ahunter/bin/perf(main+0x5d4) [0x427fb4]
Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa6f ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412d3 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull kselftest fixes from Shuah Khan:
"A fix for regression in memory-hotplug install script that prevents
the test from running on the target"
* tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: memory-hotplug: fix emit_tests regression
|
|
Pull networking fixes from David Miller:
1) Use an appropriate TSQ pacing shift in mac80211, from Toke
Høiland-Jørgensen.
2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
in ip6_route_me_harder, from Eric Dumazet.
3) Fix several shutdown races and similar other problems in l2tp, from
James Chapman.
4) Handle missing XDP flush properly in tuntap, for real this time.
From Jason Wang.
5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
Borkmann.
6) Fix phy_resume() locking, from Andrew Lunn.
7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
from Xin Long.
8) Revert F-RTO middle box workarounds, they only handle one dimension
of the problem. From Yuchung Cheng.
9) Fix socket refcounting in RDS, from Ka-Cheong Poon.
10) Don't allow ppp unit registration to an unregistered channel, from
Guillaume Nault.
11) Various hv_netvsc fixes from Stephen Hemminger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
hv_netvsc: propagate rx filters to VF
hv_netvsc: filter multicast/broadcast
hv_netvsc: defer queue selection to VF
hv_netvsc: use napi_schedule_irqoff
hv_netvsc: fix race in napi poll when rescheduling
hv_netvsc: cancel subchannel setup before halting device
hv_netvsc: fix error unwind handling if vmbus_open fails
hv_netvsc: only wake transmit queue if link is up
hv_netvsc: avoid retry on send during shutdown
virtio-net: re enable XDP_REDIRECT for mergeable buffer
ppp: prevent unregistered channels from connecting to PPP units
tc-testing: skbmod: fix match value of ethertype
mlxsw: spectrum_switchdev: Check success of FDB add operation
net: make skb_gso_*_seglen functions private
net: xfrm: use skb_gso_validate_network_len() to check gso sizes
net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
rds: Incorrect reference counting in TCP socket creation
net: ethtool: don't ignore return from driver get_fecparam method
vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
...
|
|
The changes in dd84441a7971 ("x86/speculation: Use IBRS if available
before calling into firmware") don't need any kind of special treatment
in the current tools/perf/ codebase, so just update the copy to get rid
of the perf build warning:
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mzmuxocrf96v922xkerey3ns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In 801e459a6f3a ("KVM: x86: Add a framework for supporting MSR-based
features") a new ioctl was introduced, which with this sync of the kvm
UAPI headers, makes 'perf trace' know about it:
$ cd /tmp/build/perf/trace/beauty/generated/ioctl/
$ diff -u kvm_ioctl_array.c.old kvm_ioctl_array.c
--- /tmp/kvm_ioctl_array.c 2018-03-05 11:55:38.409145056 -0300
+++ /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c 2018-03-05 11:56:17.456153501 -0300
@@ -6,6 +6,7 @@
[0x04] = "GET_VCPU_MMAP_SIZE",
[0x05] = "GET_SUPPORTED_CPUID",
[0x09] = "GET_EMULATED_CPUID",
+ [0x0a] = "GET_MSR_FEATURE_INDEX_LIST",
[0x40] = "SET_MEMORY_REGION",
[0x41] = "CREATE_VCPU",
[0x42] = "GET_DIRTY_LOG",
So when using 'perf trace -e ioctl' that will appear along with the
others, like in this excerpt of a system wide session:
14.556 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
14.565 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
14.573 ( ): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) ...
34.075 ( 0.016 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e850) = 0
40.549 ( 0.012 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73ece0) = 0
40.625 ( 0.005 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e940) = 0
40.632 ( 0.003 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffe4e73e9b0) = 0
This also silences the perf build header copy drift verifier:
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-h31oz5g0mt1dh2s2ajq6o6no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':
┌─Warning:──────────────────────┐
│fall back to non-overwrite mode│
│ │
│ │
│Press any key... │
└───────────────────────────────┘
The 'perf top' utility has been changed to overwrite mode since commit
ebebbf082357 ("perf top: Switch default mode to overwrite mode").
For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.
The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf082357 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
iproute2 print_skbmod() prints the configured ethertype using format 0x%X:
therefore, test 9aa8 systematically fails, because it configures action #4
using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing
the expected value to 0x31 lets the test result 'not ok' become 'ok'.
tested with:
# ./tdc.py -e 9aa8
Test 9aa8: Get a single skbmod action from a list
All test results:
1..1
ok 1 9aa8 Get a single skbmod action from a list
Fixes: cf797ac49b94 ("tc-testing: Add test cases for police and skbmod")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull x86/pti fixes from Thomas Gleixner:
"Three fixes related to melted spectrum:
- Sync the cpu_entry_area page table to initial_page_table on 32 bit.
Otherwise suspend/resume fails because resume uses
initial_page_table and triggers a triple fault when accessing the
cpu entry area.
- Zero the SPEC_CTL MRS on XEN before suspend to address a
shortcoming in the hypervisor.
- Fix another switch table detection issue in objtool"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
objtool: Fix another switch table detection issue
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
|
|
Commit 16c513b13477
("selftests: memory-hotplug: silence test command echo")
introduced regression in emit_tests and results in the following
failure when selftests are installed and run. Fix it.
Running tests in memory-hotplug
========================================
./run_kselftest.sh: line 121: @./mem-on-off-test.sh: No such file or
directory
selftests: memory-hotplug [FAIL]
Fixes: 16c513b13477 (selftests: memory-hotplug: silence test command echo")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-02-28
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Add schedule points and reduce the number of loop iterations
the test_bpf kernel module is performing in order to not hog
the CPU for too long, from Eric.
2) Fix an out of bounds access in tail calls in the ppc64 BPF
JIT compiler, from Daniel.
3) Fix a crash on arm64 on unaligned BPF xadd operations that
could be triggered via interpreter and JIT, from Daniel.
Please not that once you merge net into net-next at some point, there
is a minor merge conflict in test_verifier.c since test cases had
been added at the end in both trees. Resolution is trivial: keep all
the test cases from both trees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The subpage_prot syscall is only functional when the system is using
the Hash MMU. Since commit 5b2b80714796 ("powerpc/mm: Invalidate
subpage_prot() system call on radix platforms") it returns ENOENT when
the Radix MMU is active. Currently this just makes the test fail.
Additionally the syscall is not available if the kernel is built with
4K pages, or if CONFIG_PPC_SUBPAGE_PROT=n, in which case it returns
ENOSYS because the syscall is missing entirely.
So check explicitly for ENOENT and ENOSYS and skip if we see either of
those.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Pull kselftest fixes from Shuah Khan:
"Fixes for various problems in test output, compile errors, and missing
configs"
* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with new test
selftests: memory-hotplug: silence test command echo
selftests/futex: Fix line continuation in Makefile
selftests: memfd: add config fragment for fuse
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests/android: Fix line continuation in Makefile
selftest/vDSO: fix O=
selftests: sync: missing CFLAGS while compiling
|
|
Continue the switch table detection whack-a-mole. Add a check to
distinguish KASAN data reads from switch data reads. The switch jump
tables in .rodata have relocations associated with them.
This fixes the following warning:
crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
|
|
The tm-resched-dscr test links against pmu/lib.o, but we don't have a
rule to clean pmu/lib.o. This can lead to a build break if you build
for big endian and then little, or vice versa.
Fix it by making tm-resched-dscr depend on pmu/lib.c, causing the code
to be built directly in, meaning no .o is generated.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Update .gitignore with new test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Silence the following command being printed while running test.
./mem-on-off-test.sh -r 2 && echo "selftests: memory-hotplug [PASS]" ||
echo "selftests: memory-hotplug [FAIL]"
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
Steven Rostedt (VMware)
Tim Tianyang Chen
Scott Wood
Linus Torvalds
Andy Lutomirski
Li Zhijian
Josh Poimboeuf
Adrian Hunter
Ilya Pronin
Arnaldo Carvalho de Melo
Jiri Olsa
Kan Liang
Sangwon Hong
Davide Caratti
Shuah Khan
David S. Miller
Michael Ellerman