| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In keeping with the notion that all tools should be simple for
all to use. I've changed ktest.pl to ask for mandatory options
instead of just failing. It will append (or create) the options
the user types in, onto the config file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
During the config_bisect, in case of failure, it is nice to have
the last good and bad .configs that were used. This would let
us restart the config_bisect from those configs.
Copy the last good config into the output dir as config_good,
and the last bad config as config_bad.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The run_ssh handles the ssh variable $SSH_COMMAND, which was not
being used by the run_command in reboot_to function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to
allow the user to give a time (in seconds) to stop the monitor
after a stack trace or login has been detected. Sometimes the
kernel constantly prints out to the console and this may cause
the test to run indefinitely.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When we store failures, we create a directory that has the build_type
in it. For useconfig, it also contains the name path of the config
file it uses. This unfortunately gets its own directory on failure.
Parse off the directory name when creating the directory to store
the failures.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
By using the "use_config" for minconfig and addconfig we risk
trying to copy itself to itself, which will cause an unexpected failure.
Use a different name instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added documentation for SSH_EXEC, SCP_TO_TARGET, REBOOT,
and CONFIG_BISECT and friends.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a compare script that makes sure that all the options in
sample.conf are used in ktest.pl, and all the options in
ktest.pl are described in sample.conf.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added the ability to do a config_bisect. It starts with a bad
config and does the following loop.
Enable half the configs.
if none of the configs to check are not enabled
(caused by missing dependencies) enable the other half.
Run the test
if the test passes, remove the configs from the check
but enabled them for further tests (to satisfy
dependencies).
else
Remove any config that was not enabled, as we have found
a new config that can cause a failure.
loop till we have only one config left.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Updated to version 0.2.
Now have SSH_EXEC options.
Also added some cleanups for keeping track of success and
reading the config file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Have a easy way to parse the log file for success or failure.
KTEST RESULT: ...
Suggested-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Allow a test case in the config file to undefine a default
value by specifying the option and equal sign but not assigning
it a value:
OPTION =
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
To help prevent typos, use $output_config as the reference to
"$outputdir/.config".
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If no LOG_FILE option is set, then write what would be logged to
that file to standard output.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Running the command "yes ''" through the make oldconfig may enable
things we do not want enabled. If something is default enabled, the
yes command with '' as an argument will enable it.
Use oldnoconfig, which runs everything as if 'no' was used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Change the config to use TEST_START where the options after a
TEST_START automatically get the [] as it is read and they do
not need to exist in the config file;
TEST_START
MIN_CONFIG = myconfig
is the same as
MIN_CONFIG[1] = myconfig
The benefit is that you no longer need to keep track of test numbers
with tests.
Also process the commit ids that are passed to the options
to get the actually SHA1 so it is no longer relative to the branch.
Ie, saying HEAD will get the current SHA1 and then that will
be used, and will work even if another branch is checked out.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added the options POWEROFF_AFTER_HALT to handle boxes that do not
really shut off after a halt is called.
Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that
don't reboot but get stuck during the reboot.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a POST_INSTALL option that runs after the build and install
but before rebooting to the test kernel. This alls the user to
run a script that will install an initrd (or anything else that may
be special) before booting.
An environment variable KERNEL_VERSION is set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added sample.conf as a nice document to show new users.
Use a %default hash to separate out the options that are default
and allow us to complain about options being set twice.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
It is much better to keep the monitor running throughout a
test than to constantly start and stop it. Some console readers
will show everything that has happened before when opening the
console, and by opening it several times, causes the old content to
be read multiple times in a single test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add option to continue after a test fails.
Add option to reset the log at start of running ktest.
Update default timeout to 2 minutes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added the ability to do a reverse bisect.
Better logging of running commands.
Added the copyright statement.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added patchcheck functionality. It will checkout a given SHA1
and test that commit and all commits to another given SHA1.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Better reading of the console.
Added running a script to do testing after build succeeds.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added bisecting, modules, logging of the output.
Banners that show success.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
REBOOT_ON_ERROR to reboot the box on error
BUILD_OPTIONS to add options to the make build (like -j40)
Added "useconfig:<config>".
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Added dodie function to have a bit more control over die calls.
BUILD_NOCLEAN to not run make mrproper or remove .config.
POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests.
Skip backtrace calls that were done by the backtrace tests.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Originally named autotest.pl, but renamed to ktest.pl now because
the autotest name is used by other projects.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
|
|
The equivalent to this SystemTAP script:
http://sourceware.org/systemtap/wiki/WSFutexContention
[root@doppio ~]# perf trace futex-contention
Press control+C to stop and show the summary
^Cnpviewer.bin[15242] lock 7f0a8be19104 contended 29 times, 72806 avg ns
npviewer.bin[15242] lock 7f0a8be19130 contended 2 times, 1355 avg ns
synergyc[17245] lock f127f4 contended 1 times, 1830569 avg ns
firefox[15116] lock 7f2b7238af0c contended 168 times, 1230390 avg ns
synergyc[17245] lock f2fc20 contended 1 times, 33149 avg ns
npviewer.bin[15255] lock 7f0a8be19074 contended 155 times, 73047 avg ns
npviewer.bin[15255] lock 7f0a8be190a0 contended 127 times, 7088 avg ns
synergyc[17247] lock f12854 contended 1 times, 46741 avg ns
synergyc[17245] lock f12610 contended 1 times, 7358 avg ns
[root@doppio ~]#
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We want just the script output, not internal details about the record phase.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If we include a newline character in the string argument to perror()
then the output will be split across two lines like so,
Unable to read perf file descriptor
: No space left on device
Deleting the newline character prints a much more readable error,
Unable to read perf file descriptor: No space left on device
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <89e77b54659bc3798b23a5596c2debb7f6f4cf27.1283010281.git.matt@console-pimps.org>
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@felicio.ghostprotocols.net>
|
|
|
|
Where we don't have the audit.MACH_ARMEB constant.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
. Print message at script start telling how to get te summary
. Print the syscall names
. Accept both pid (if numeric) or COMM name
Now it looks like this:
[root@emilia tmp]# perf trace syscall-counts-by-pid
Press control+C to stop and show the summary
^C
syscall events by comm/pid:
comm [pid]/syscalls count
---------------------------------------- ----------
automount [1670]
futex 2
sshd [2322]
rt_sigprocmask 4
select 2
write 1
read 1
perf [15178]
read 2506
open 794
close 769
write 240
getdents 112
lseek 16
stat 9
perf_counter_open 5
fcntl 5
mmap 5
statfs 2
perf [15179]
read 56701
open 499
stat 176
fstat 149
close 109
mmap 98
brk 75
rt_sigaction 66
munmap 42
mprotect 24
lstat 7
lseek 5
getdents 4
ioctl 3
readlink 2
futex 1
statfs 1
getegid 1
geteuid 1
getgid 1
getuid 1
getrlimit 1
fcntl 1
uname 1
write 1
[root@emilia tmp]# fg
-bash: fg: current: no such job
[root@emilia tmp]# perf trace syscall-counts-by-pid 2322
Press control+C to stop and show the summary
^C
syscall events by comm/pid:
comm [pid]/syscalls count
---------------------------------------- ----------
sshd [2322]
rt_sigprocmask 4
select 2
write 1
read 1
[root@emilia tmp]# perf trace syscall-counts-by-pid sshd
Press control+C to stop and show the summary
^C
syscall events for sshd:
comm [pid]/syscalls count
---------------------------------------- ----------
sshd [2322]
rt_sigprocmask 4
select 2
write 1
read 1
[root@emilia tmp]#
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
[root@emilia tmp]# perf trace sctop 1
syscall events:
event count
---------------------------------------- ----------
read 215400
futex 4029
write 376
brk 33
rt_sigprocmask 24
select 17
lseek 2
fsync 1
^C[root@emilia tmp]#
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
. Print message at script start telling how to get te summary
. Print the syscall name
Now it looks like this:
[root@emilia ~]# perf trace syscall-counts
Press control+C to stop and show the summary
^C
syscall events:
event count
---------------------------------------- -----------
read 102752
open 1293
close 878
write 319
stat 185
fstat 149
getdents 116
mmap 98
brk 80
rt_sigaction 66
munmap 42
mprotect 24
lseek 21
lstat 7
rt_sigprocmask 4
futex 3
statfs 3
ioctl 3
readlink 2
select 2
getegid 1
geteuid 1
getgid 1
getuid 1
getrlimit 1
fcntl 1
uname 1
[root@emilia ~]#
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
. Print message at script start telling how to get te summary
. Print the syscall name using the audit-lib-python package, if
installed
. Print the errno string
. Accept both pid (if numeric) or COMM name
Now it looks like this:
[root@emilia ~]# perf trace failed-syscalls-by-pid
Press control+C to stop and show the summary
^C
syscall errors:
comm [pid] count
------------------------------ ----------
automount [1670]
syscall: futex
err = ETIMEDOUT 39
irqbalance [1462]
syscall: openat
err = ENOENT 4
perf [7888]
syscall: lseek
err = ESPIPE 1
syscall: open
err = ENOENT 24
perf [7889]
syscall: ioctl
err = EINVAL 1
syscall: readlink
err = EINVAL 2
syscall: open
err = ENOENT 389
syscall: stat
err = ENOENT 141
syscall: lseek
err = ESPIPE 3
[root@emilia ~]#
[root@emilia ~]# perf trace failed-syscalls-by-pid 1670
Press control+C to stop and show the summary
^C
syscall errors:
comm [pid] count
------------------------------ ----------
automount [1670]
syscall: futex
err = ETIMEDOUT 2
[root@emilia ~]#
[root@emilia ~]#
[root@emilia ~]#
[root@emilia ~]# perf trace failed-syscalls-by-pid automount
Press control+C to stop and show the summary
^C
syscall errors for automount:
comm [pid] count
------------------------------ ----------
automount [1669]
syscall: futex
err = ETIMEDOUT 1
automount [1670]
syscall: futex
err = ETIMEDOUT 5
[root@emilia ~]#
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
|
Fixing the following error on 32-bit arches:
util/probe-finder.c: In function ‘line_range_search_cb’:
util/probe-finder.c:1734: error: format ‘%lx’ expects type ‘long
unsigned int’, but argument 3 has type ‘Dwarf_Off’
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The extension starts with the last dot in the name, not the first.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723462.2955.206.camel@localhost>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set $PERF_EXEC_PATH before starting the record and report scripts, and
make them use it where necessary.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286723403.2955.205.camel@localhost>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Existing documentation doesn't discuss event modifiers, so add a description of
what's currently possible to the documentation of perf-list.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1287107460-12112-1-git-send-email-sonnyrao@linux.vnet.ibm.com>
Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We wrap it in libslang.h because we need to deal with older slang release
where HAVE_LONG_LONG is referenced as:
So we need to define it.
Noticed when rebuilding the perf tools on a RHEL5 machine.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
tracing: Fix compile issue for trace_sched_wakeup.c
[S390] hardirq: remove pointless header file includes
[IA64] Move local_softirq_pending() definition
perf, powerpc: Fix power_pmu_event_init to not use event->ctx
ftrace: Remove recursion between recordmcount and scripts/mod/empty
jump_label: Add COND_STMT(), reducer wrappery
perf: Optimize sw events
perf: Use jump_labels to optimize the scheduler hooks
jump_label: Add atomic_t interface
jump_label: Use more consistent naming
perf, hw_breakpoint: Fix crash in hw_breakpoint creation
perf: Find task before event alloc
perf: Fix task refcount bugs
perf: Fix group moving
irq_work: Add generic hardirq context callbacks
perf_events: Fix transaction recovery in group_sched_in()
perf_events: Fix bogus AMD64 generic TLB events
perf_events: Fix bogus context time tracking
tracing: Remove parent recording in latency tracer graph options
tracing: Use one prologue for the preempt irqs off tracer function tracers
...
|
|
Add basic module probe support on perf probe. This introduces "--module
<MODNAME>" option to perf probe for putting probes and showing lines and
variables in the given module.
Currently, this supports only probing on running modules. Supporting off-line
module probing is the next step.
e.g.)
[show lines]
# ./perf probe --module drm -L drm_vblank_info
<drm_vblank_info:0>
0 int drm_vblank_info(struct seq_file *m, void *data)
1 {
struct drm_info_node *node = (struct drm_info_node *) m->private
3 struct drm_device *dev = node->minor->dev;
...
[show vars]
# ./perf probe --module drm -V drm_vblank_info:3
Available variables at drm_vblank_info:3
@<drm_vblank_info+20>
(unknown_type) data
struct drm_info_node* node
struct seq_file* m
[put a probe]
# ./perf probe --module drm drm_vblank_info:3 node m
Add new event:
probe:drm_vblank_info (on drm_vblank_info:3 with node m)
You can now use it on all perf tools, such as:
perf record -e probe:drm_vblank_info -aR sleep 1
[list probes]
# ./perf probe -l
probe:drm_vblank_info (on drm_vblank_info:3@drivers/gpu/drm/drm_info.c with ...
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101341.3542.71638.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add --externs for allowing --vars to show accessible global (externally
defined) variables from a given probe point too.
This will give you a hint which globals can be accessible from the probe point.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20101021101335.3542.31003.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
Steven Rostedt
Ingo Molnar
Arnaldo Carvalho de Melo
Matt Fleming
Ben Hutchings
Sonny Rao
Linus Torvalds
Masami Hiramatsu