aboutsummaryrefslogtreecommitdiffstats
path: root/tools (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-23selftests: fib_tests: sleep after changing carrier. again.Thadeu Lima de Souza Cascardo1-0/+1
Just like commit e2ba732a1681 ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bpf, lpm: fix lookup bug in map_delete_elemAlban Crequy1-0/+10
trie_delete_elem() was deleting an entry even though it was not matching if the prefixlen was correct. This patch adds a check on matchlen. Reproducer: $ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1 $ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm key: 10 00 00 00 aa bb cc dd value: 01 Found 1 element $ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff $ echo $? 0 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm Found 0 elements A similar reproducer is added in the selftests. Without the patch: $ sudo ./tools/testing/selftests/bpf/test_lpm_map test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed. Aborted With the patch: test_lpm_map runs without errors. Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE") Cc: Craig Gallek <kraig@google.com> Signed-off-by: Alban Crequy <alban@kinvolk.io> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-3/+0
Pull networking fixes from David Miller: 1) Fix MAC address setting in mac80211 pmsr code, from Johannes Berg. 2) Probe SFP modules after being attached, from Russell King. 3) Byte ordering bug in SMC rx_curs_confirmed code, from Ursula Braun. 4) Revert some r8169 changes that are causing regressions, from Heiner Kallweit. 5) Fix spurious connection timeouts in netfilter nat code, from Florian Westphal. 6) SKB leak in tipc, from Hoang Le. 7) Short packet checkum issue in mlx4, similar to a previous mlx5 change, from Saeed Mahameed. The issue is that whilst padding bytes are usually zero, it is not guarateed and the hardware doesn't take the padding bytes into consideration when generating the checksum. 8) Fix various races in cls_tcindex, from Cong Wang. 9) Need to set stream ext to NULL before freeing in SCTP code, from Xin Long. 10) Fix locking in phy_is_started, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) net: ethernet: freescale: set FEC ethtool regs version net: hns: Fix object reference leaks in hns_dsaf_roce_reset() mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs net: phy: fix potential race in the phylib state machine net: phy: don't use locking in phy_is_started selftests: fix timestamping Makefile net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend() net: fix possible overflow in __sk_mem_raise_allocated() dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit net: phy: fix interrupt handling in non-started states sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment net/mlx5e: XDP, fix redirect resources availability check net/mlx5: Fix a compilation warning in events.c net/mlx5: No command allowed when command interface is not ready net/mlx5e: Fix NULL pointer derefernce in set channels error flow netfilter: nft_compat: use-after-free when deleting targets team: avoid complex list operations in team_nl_cmd_options_set() net_sched: fix two more memory leaks in cls_tcindex net_sched: fix a memory leak in cls_tcindex ...
2019-02-14selftests: fix timestamping MakefileDeepa Dinamani1-3/+0
The clean target in the makefile conflicts with the generic kselftests lib.mk, and fails to properly remove the compiled test programs. Remove the redundant rule, the TEST_GEN_FILES will be already removed by the CLEAN macro in lib.mk. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10tools uapi: fix Alpha supportBob Tracy1-0/+2
Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Bob Tracy <rct@frus.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
2019-02-10Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds11-30/+88
Pull perf fixes from Ingo Molnar: "A couple of kernel side fixes: - Fix the Intel uncore driver on certain hardware configurations - Fix a CPU hotplug related memory allocation bug - Remove a spurious WARN() ... plus also a handful of perf tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf script python: Add Python3 support to tests/attr.py perf trace: Support multiple "vfs_getname" probes perf symbols: Filter out hidden symbols from labels perf symbols: Add fallback definitions for GELF_ST_VISIBILITY() tools headers uapi: Sync linux/in.h copy from the kernel sources perf clang: Do not use 'return std::move(something)' perf mem/c2c: Fix perf_mem_events to support powerpc perf tests evsel-tp-sched: Fix bitwise operator perf/core: Don't WARN() for impossible ring-buffer sizes perf/x86/intel: Delay memory deallocation until x86_pmu_dead_cpu() perf/x86/intel/uncore: Add Node ID mask
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds8-34/+815
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ...
2019-02-08Merge tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds5-0/+286
Pull char/misc fixes from Greg KH: "Here are some small char and misc driver fixes for 5.0-rc6. Nothing huge here, some more binderfs fixups found as people use it, and there is a "large" selftest added to validate the binderfs code, which makes up the majority of this pull request. There's also some small mei and mic fixes to resolve some reported issues. All of these have been in linux-next for over a week with no reported issues" * tag 'char-misc-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mic: vop: Fix crash on remove mic: vop: Fix use-after-free on remove binderfs: remove separate device_initcall() fpga: stratix10-soc: fix wrong of_node_put() in init function mic: vop: Fix broken virtqueues mei: free read cb on ctrl_wr list flush samples: mei: use /dev/mei0 instead of /dev/mei mei: me: add ice lake point device id. binderfs: respect limit on binder control creation binder: fix CONFIG_ANDROID_BINDER_DEVICES selftests: add binderfs selftests
2019-02-08Merge tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds1-1/+1
Pull staging/IIO driver fixes from Greg KH: "Here are some small iio and staging driver fixes for 5.0-rc6. Nothing big, just resolve some reported IIO driver issues, and one staging driver bug. One staging driver patch was added and then reverted as well. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()" staging: erofs: keep corrupted fs from crashing kernel in erofs_namei() staging: octeon: fix broken phylib usage iio: ti-ads8688: Update buffer allocation for timestamps tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
2019-02-05perf script python: Add Python3 support to tests/attr.pyTony Jones1-13/+19
Support both Python 2 and Python 3 in tests/attr.py The use of "except as" syntax implies the minimum supported Python2 version is now v2.6 Committer testing: $ make -C tools/perf PYTHON3=python install-bin Before: # perf test attr 16: Setup struct perf_event_attr : FAILED! 48: Synthesize attr update : Ok [root@quaco ~]# perf test -v attr 16: Setup struct perf_event_attr : --- start --- test child forked, pid 3121 File "/home/acme/libexec/perf-core/tests/attr.py", line 324 except Unsup, obj: ^ SyntaxError: invalid syntax test child finished with -1 ---- end ---- Setup struct perf_event_attr: FAILED! 48: Synthesize attr update : --- start --- test child forked, pid 3124 test child finished with 0 ---- end ---- Synthesize attr update: Ok # After: # perf test attr 16: Setup struct perf_event_attr : Ok 48: Synthesize attr update : Ok # Signed-off-by: Tony Jones <tonyj@suse.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20190124005229.16146-7-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf trace: Support multiple "vfs_getname" probesArnaldo Carvalho de Melo1-7/+18
With a suitably defined "probe:vfs_getname" probe, 'perf trace' can "beautify" its output, so syscalls like open() or openat() can print the "filename" argument instead of just its hex address, like: $ perf trace -e open -- touch /dev/null [...] 0.590 ( 0.014 ms): touch/18063 open(filename: /dev/null, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 [...] The output without such beautifier looks like: 0.529 ( 0.011 ms): touch/18075 open(filename: 0xc78cf288, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 However, when the vfs_getname probe expands to multiple probes and it is not the first one that is hit, the beautifier fails, as following: 0.326 ( 0.010 ms): touch/18072 open(filename: , flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 Fix it by hooking into all the expanded probes (inlines), now, for instance: [root@quaco ~]# perf probe -l probe:vfs_getname (on getname_flags:73@fs/namei.c with pathname) probe:vfs_getname_1 (on getname_flags:73@fs/namei.c with pathname) [root@quaco ~]# perf trace -e open* sleep 1 0.010 ( 0.005 ms): sleep/5588 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: RDONLY|CLOEXEC) = 3 0.029 ( 0.006 ms): sleep/5588 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: RDONLY|CLOEXEC) = 3 0.194 ( 0.008 ms): sleep/5588 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: RDONLY|CLOEXEC) = 3 [root@quaco ~]# Works, further verified with: [root@quaco ~]# perf test vfs 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok [root@quaco ~]# Reported-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-mv8kolk17xla1smvmp3qabv1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf symbols: Filter out hidden symbols from labelsJiri Olsa1-1/+8
When perf is built with the annobin plugin (RHEL8 build) extra symbols are added to its binary: # nm perf | grep annobin | head -10 0000000000241100 t .annobin_annotate.c 0000000000326490 t .annobin_annotate.c 0000000000249255 t .annobin_annotate.c_end 00000000003283a8 t .annobin_annotate.c_end 00000000001bce18 t .annobin_annotate.c_end.hot 00000000001bce18 t .annobin_annotate.c_end.hot 00000000001bc3e2 t .annobin_annotate.c_end.unlikely 00000000001bc400 t .annobin_annotate.c_end.unlikely 00000000001bce18 t .annobin_annotate.c.hot 00000000001bce18 t .annobin_annotate.c.hot ... Those symbols have no use for report or annotation and should be skipped. Moreover they interfere with the DWARF unwind test on the PPC arch, where they are mixed with checked symbols and then the test fails: # perf test dwarf -v 59: Test dwarf unwind : --- start --- test child forked, pid 8515 unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc) ... got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample unwind: failed with 'no error' The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN: # readelf -s ./perf | grep annobin | head -1 40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c They can still pass the check for the label symbol. Adding check for HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter out such symbols. > Just to be awkward, if you are going to ignore STV_HIDDEN > symbols then you should probably also ignore STV_INTERNAL ones > as well... Annobin does not generate them, but you never know, > one day some other tool might create some. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Clifton <nickc@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf symbols: Add fallback definitions for GELF_ST_VISIBILITY()Arnaldo Carvalho de Melo1-0/+14
Those aren't present in Alpine Linux 3.4 to edge, so provide fallback defines to get the next patch building there keeping the build bisectable. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Clifton <nickc@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/n/tip-03cg3gya2ju4ba2x6ibb9fuz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04tools headers uapi: Sync linux/in.h copy from the kernel sourcesArnaldo Carvalho de Melo1-1/+1
To get the changes in this cset: f275ee0fa3a0 ("IN_BADCLASS: fix macro to actually work") The macros changed in this cset are not used in tools/, so this is just to silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-xbk34kwamn8bw8ywpuxetct9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf clang: Do not use 'return std::move(something)'Arnaldo Carvalho de Melo1-1/+1
It prevents copy elision, generating this warning when building with fedora:rawhide's clang: clang version 7.0.1 (Fedora 7.0.1-2.fc30) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /usr/bin Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9 Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/9 Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9 Candidate multilib: .;@m64 Candidate multilib: 32;@m32 Selected multilib: .;@m64 $ make -C tools/perf CC=clang LIBCLANGLLVM=1 <SNIP> util/c++/clang.cpp: In function 'std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)': util/c++/clang.cpp:163:18: error: moving a local object in a return statement prevents copy elision [-Werror=pessimizing-move] 163 | return std::move(Buffer); | ~~~~~~~~~^~~~~~~~ util/c++/clang.cpp:163:18: note: remove 'std::move' call cc1plus: all warnings being treated as errors <SNIP> References: http://www.cplusplus.com/forum/general/186411/#msg908572 https://en.cppreference.com/w/cpp/language/return#Notes https://en.cppreference.com/w/cpp/language/copy_elision Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-lehqf5x5q96l0o8myhb6blz6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf mem/c2c: Fix perf_mem_events to support powerpcRavi Bangoria5-6/+26
PowerPC hardware does not have a builtin latency filter (--ldlat) for the "mem-load" event and perf_mem_events by default includes "/ldlat=30/" which is causing a failure on PowerPC. Refactor the code to support "perf mem/c2c" on PowerPC. This patch depends on kernel side changes done my Madhavan: https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-December/182596.html Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Dick Fowles <fowles@inreach.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190129132412.771-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04perf tests evsel-tp-sched: Fix bitwise operatorGustavo A. R. Silva1-1/+1
Notice that the use of the bitwise OR operator '|' always leads to true in this particular case, which seems a bit suspicious due to the context in which this expression is being used. Fix this by using bitwise AND operator '&' instead. This bug was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Fixes: 6a6cd11d4e57 ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190122233439.GA5868@embeddedor Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-04selftests: netfilter: add simple masq/redirect test casesFlorian Westphal2-1/+763
Check basic nat/redirect/masquerade for ipv4 and ipv6. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-04selftests: netfilter: fix config fragment CONFIG_NF_TABLES_INETNaresh Kamboju1-1/+1
In selftests the config fragment for netfilter was added as NF_TABLES_INET=y and this patch correct it as CONFIG_NF_TABLES_INET=y Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-03Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds5-16/+28
Pull perf fixes from Thomas Gleixner: "A pile of perf updates: - Fix broken sanity check in the /proc/sys/kernel/perf_cpu_time_max_percent write handler - Cure a perf script crash which caused by an unitinialized data structure - Highlight the hottest instruction in perf top and not a random one - Cure yet another clang issue when building perf python - Handle topology entries with no CPU correctly in the tools - Handle perf data which contains both tracepoints and performance counter entries correctly. - Add a missing NULL pointer check in perf ordered_events_free()" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf script: Fix crash when processing recorded stat data perf top: Fix wrong hottest instruction highlighted perf tools: Handle TOPOLOGY headers with no CPU perf python: Remove -fstack-clash-protection when building with some clang versions perf core: Fix perf_proc_update_handler() bug perf script: Fix crash with printing mixed trace point and other events perf ordered_events: Fix crash in ordered_events__free
2019-02-03Merge tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linusGreg Kroah-Hartman1-1/+1
Jonathan writes: First set of IIO fixes for the 5.0 cycle. Been a busy month, so these are rather later than they should have been. * atlas-ph-sensor: - Temperature scale didn't correspond to the ABI. * axp288: - A few different fixes around the TS-pin handling. * ti-ads8688 - Not enough space in the buffer used to build the scan to allow for the timestamp. * tools - iio_generic_buffer - Make num_loops signed so that we really are running for ever rather than just a long time when we specify -1. * tag 'iio-fixes-5.0a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ti-ads8688: Update buffer allocation for timestamps tools: iio: iio_generic_buffer: make num_loops signed iio: adc: axp288: Fix TS-pin handling iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
2019-02-01proc: fix /proc/net/* after setns(2)Alexey Dobriyan3-0/+131
/proc entries under /proc/net/* can't be cached into dcache because setns(2) can change current net namespace. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: avoid vim miscolorization] [adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time] Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2 Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2 Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: Mateusz Stępień <mateusz.stepien@netrounds.com> Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller5-32/+51
Alexei Starovoitov says: ==================== pull-request: bpf 2019-01-31 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) disable preemption in sender side of socket filters, from Alexei. 2) fix two potential deadlocks in syscall bpf lookup and prog_register, from Martin and Alexei. 3) fix BTF to allow typedef on func_proto, from Yonghong. 4) two bpftool fixes, from Jiri and Paolo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-31bpf, selftests: fix handling of sparse CPU allocationsMartynas Pumputis1-10/+20
Previously, bpf_num_possible_cpus() had a bug when calculating a number of possible CPUs in the case of sparse CPU allocations, as it was considering only the first range or element of /sys/devices/system/cpu/possible. E.g. in the case of "0,2-3" (CPU 1 is not available), the function returned 1 instead of 3. This patch fixes the function by making it parse all CPU ranges and elements. Signed-off-by: Martynas Pumputis <m@lambda.lt> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-31Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds5-20/+71
Pull kselftest fixes from Shuah Khan: "This consists of run-time fixes to cpu-hotplug, and seccomp tests, compile fixes to ir, net, and timers Makefiles" * tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: timers: use LDLIBS instead of LDFLAGS selftests: net: use LDLIBS instead of LDFLAGS selftests/seccomp: Enhance per-arch ptrace syscall skip tests selftests: Use lirc.h from kernel tree, not from system selftests: cpu-hotplug: fix case where CPUs offline > CPUs present
2019-01-30selftests: add binderfs selftestsChristian Brauner5-0/+286
This adds the promised selftest for binderfs. It will verify the following things: - binderfs mounting works - binder device allocation works - performing a binder ioctl() request through a binderfs device works - binder device removal works - binder-control removal fails - binderfs unmounting works The tests are performed both privileged and unprivileged. The latter verifies that binderfs behaves correctly in user namespaces. Cc: Todd Kjos <tkjos@google.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-29tools/bpf: fix test_btf for typedef func_proto caseYonghong Song1-6/+3
Fixed one test_btf raw test such that typedef func_proto is permitted now. Fixes: 78a2540e8945 ("tools/bpf: Add tests for BTF_KIND_FUNC_PROTO and BTF_KIND_FUNC") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-22/+131
Pull networking fixes from David Miller: 1) Need to save away the IV across tls async operations, from Dave Watson. 2) Upon successful packet processing, we should liberate the SKB with dev_consume_skb{_irq}(). From Yang Wei. 3) Only apply RX hang workaround on effected macb chips, from Harini Katakam. 4) Dummy netdev need a proper namespace assigned to them, from Josh Elsasser. 5) Some paths of nft_compat run lockless now, and thus we need to use a proper refcnt_t. From Florian Westphal. 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua. 7) netrom does not refcount sockets properly wrt. timers, fix that by using the sock timer API. From Cong Wang. 8) Fix locking of inexact inserts of xfrm policies, from Florian Westphal. 9) Missing xfrm hash generation bump, also from Florian. 10) Missing of_node_put() in hns driver, from Yonglong Liu. 11) Fix DN_IFREQ_SIZE, from Johannes Berg. 12) ip6mr notifier is invoked during traversal of wrong table, from Nir Dotan. 13) TX promisc settings not performed correctly in qed, from Manish Chopra. 14) Fix OOB access in vhost, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) MAINTAINERS: Add entry for XDP (eXpress Data Path) net: set default network namespace in init_dummy_netdev() net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles net: caif: call dev_consume_skb_any when skb xmit done net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: macb: Apply RXUBR workaround only to versions with errata net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq net: tls: Fix deadlock in free_resources tx net: tls: Save iv in tls_rec for async crypto requests vhost: fix OOB in get_rx_bufs() qed: Fix stack out of bounds bug qed: Fix system crash in ll2 xmit qed: Fix VF probe failure while FLR qed: Fix LACP pdu drops for VFs qed: Fix bug in tx promiscuous mode settings net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles netfilter: ipt_CLUSTERIP: fix warning unused variable cn ...
2019-01-28tools: bpftool: fix crash with un-owned prog arraysJakub Kicinski2-14/+9
Prog arrays don't have 'owner_prog_type' and 'owner_jited' fields in their fdinfo when they are created. Those fields are set and reported when first program is checked for compatibility by bpf_prog_array_compatible(). This means that bpftool cannot expect the fields to always be there. Currently trying to show maps on a system with an un-owned prog array leads to a crash: $ bpftool map show 389: prog_array name tail_call_map flags 0x0 Error: key 'owner_prog_type' not found in fdinfo Error: key 'owner_jited' not found in fdinfo key 4B value 4B max_entries 4 memlock 4096B Segmentation fault (core dumped) We pass a NULL pointer to atoi(). Remove the assumption that fdinfo keys are always present. Add missing validations and remove the p_err() calls which may lead to broken JSON output as caller will not propagate the failure. Fixes: 99a44bef5870 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28selftests: timers: use LDLIBS instead of LDFLAGSFathi Boudra1-1/+1
posix_timers fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall -DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread posix_timers.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers /tmp/cc1FTZzT.o: In function `check_timer_create': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157: undefined reference to `timer_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170: undefined reference to `timer_settime' collect2: error: ld returned 1 exit status It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-28selftests: net: use LDLIBS instead of LDFLAGSFathi Boudra1-1/+1
reuseport_bpf_numa fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa /tmp/ccfUuExT.o: In function `send_from_node': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138: undefined reference to `numa_run_on_node' /tmp/ccfUuExT.o: In function `main': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230: undefined reference to `numa_available' /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233: undefined reference to `numa_max_node' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libnuma. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-27Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-10/+31
Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Fix the swapped outb() parameters in the KASLR code - Fix the PKEY handling at fork which missed to preserve the pkey state for the child. Comes with a test case to validate that. - Fix the entry stack handling for XEN PV to respect that XEN PV systems enter the function already on the current thread stack and not on the trampoline. - Fix kexec load failure caused by using a stale value when the kexec_buf structure is reused for subsequent allocations. - Fix a bogus sizeof() in the memory encryption code - Enforce PCI dependency for the Intel Low Power Subsystem - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled x86/entry/64/compat: Fix stack switching for XEN PV x86/kexec: Fix a kexec_file_load() failure x86/mm/mem_encrypt: Fix erroneous sizeof() x86/selftests/pkeys: Fork() to check for state being preserved x86/pkeys: Properly copy pkey state at fork() x86/kaslr: Fix incorrect i8254 outb() parameters x86/intel/lpss: Make PCI dependency explicit
2019-01-27Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller1-22/+131
Steffen Klassert says: ==================== pull request (net): ipsec 2019-01-25 1) Several patches to fix the fallout from the recent tree based policy lookup work. From Florian Westphal. 2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets. We need an extra IPIP handler to process these packets correctly. From Su Yanjun. 3) Fix validation of template and selector families for MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets. This can lead to a stack-out-of-bounds because flowi4 struct is treated as flowi6 struct. Fix from Florian Westphal. 4) Restore the default behaviour of the xfrm set-mark in the output path. This was changed accidentally when mark setting was extended to the input path. From Benedict Wong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-7/+8
Pull KVM fixes from Paolo Bonzini: "Quite a few fixes for x86: nested virtualization save/restore, AMD nested virtualization and virtual APIC, 32-bit fixes, an important fix to restore operation on older processors, and a bunch of hyper-v bugfixes. Several are marked stable. There are also fixes for GCC warnings and for a GCC/objtool interaction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Mark expected switch fall-throughs KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths KVM: selftests: check returned evmcs version range x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function kvm: selftests: Fix region overlap check in kvm_util kvm: vmx: fix some -Wmissing-prototypes warnings KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1 svm: Fix AVIC incomplete IPI emulation svm: Add warning message for AVIC IPI invalid target KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error KVM: x86: Fix PV IPIs for 32-bit KVM host x86/kvm/hyper-v: recommend using eVMCS only when it is enabled x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR kvm: x86/vmx: Use kzalloc for cached_vmcs12 KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL KVM: x86: Fix single-step debugging x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
2019-01-27Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-2/+2
Pull libnvdimm fixes from Dan Williams: "A fix for namespace label support for non-Intel NVDIMMs that implement the ACPI standard label method. This has apparently never worked and could wait for v5.1. However it has enough visibility with hardware vendors [1] and distro bug trackers [2], and low enough risk that I decided it should go in for -rc4. The other fixups target the new, for v5.0, nvdimm security functionality. The larger init path fixup closes a memory leak and a potential userspace lockup due to missed notifications. [1] https://github.com/pmem/ndctl/issues/78 [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785 These have all soaked in -next for a week with no reported issues. Summary: - Fix support for NVDIMMs that implement the ACPI standard label methods. - Fix error handling for security overwrite (memory leak / userspace hang condition), and another one-line security cleanup" * tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi/nfit: Fix command-supported detection acpi/nfit: Block function zero DSMs libnvdimm/security: Require nvdimm_security_setup_events() to succeed nfit_test: fix security state pull for nvdimm security nfit_test
2019-01-25selftests/seccomp: Enhance per-arch ptrace syscall skip testsKees Cook1-15/+57
Passing EPERM during syscall skipping was confusing since the test wasn't actually exercising the errno evaluation -- it was just passing a literal "1" (EPERM). Instead, expand the tests to check both direct value returns (positive, 45000 in this case), and errno values (negative, -ESRCH in this case) to check both fake success and fake failure during syscall skipping. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace actions") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-25selftests: Use lirc.h from kernel tree, not from systemSean Young1-0/+2
When the system lirc.h is older than v4.16, you will get errors like: ir_loopback.c:32:16: error: field ‘proto’ has incomplete type enum rc_proto proto; Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-25selftests: cpu-hotplug: fix case where CPUs offline > CPUs presentColin Ian King1-3/+10
The cpu-hotplug test assumes that we can offline the maximum CPU as described by /sys/devices/system/cpu/offline. However, in the case where the number of CPUs exceeds like kernel configuration then the offline count can be greater than the present count and we end up trying to test the offlining of a CPU that is not available to offline. Fix this by testing the maximum present CPU instead. Also, the test currently offlines the CPU and does not online it, so fix this by onlining the CPU after the test. Fixes: d89dffa976bc ("fault-injection: add selftests for cpu and memory hotplug") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-01-25KVM: selftests: check returned evmcs version rangeVitaly Kuznetsov1-0/+6
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-25kvm: selftests: Fix region overlap check in kvm_utilBen Gardon1-7/+2
Fix a call to userspace_mem_region_find to conform to its spec of taking an inclusive, inclusive range. It was previously being called with an inclusive, exclusive range. Also remove a redundant region bounds check in vm_userspace_mem_region_add. Region overlap checking is already performed by the call to userspace_mem_region_find. Tested: Compiled tools/testing/selftests/kvm with -static Ran all resulting test binaries on an Intel Haswell test machine All tests passed Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-23bpftool: fix percpu maps updatingPaolo Abeni1-0/+16
When updating a percpu map, bpftool currently copies the provided value only into the first per CPU copy of the specified value, all others instances are left zeroed. This change explicitly copies the user-provided bytes to all the per CPU instances, keeping the sub-command syntax unchanged. v2 -> v3: - drop unused argument, as per Quentin's suggestion v1 -> v2: - rename the helper as per Quentin's suggestion Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23bpftool: Fix prog dump by tagJiri Olsa1-2/+3
Lance reported an issue with bpftool not being able to dump program if there are more programs loaded and you want to dump any but the first program, like: # bpftool prog 28: kprobe name trace_req_start tag 1dfc28ba8b3dd597 gpl loaded_at 2019-01-18T17:02:40+1100 uid 0 xlated 112B jited 109B memlock 4096B map_ids 13 29: kprobe name trace_req_compl tag 5b6a5ecc6030a683 gpl loaded_at 2019-01-18T17:02:40+1100 uid 0 xlated 928B jited 575B memlock 4096B map_ids 13,14 # bpftool prog dum jited tag 1dfc28ba8b3dd597 0: push %rbp 1: mov %rsp,%rbp ... # bpftool prog dum jited tag 5b6a5ecc6030a683 Error: can't get prog info (29): Bad address The problem is in the prog_fd_by_tag function not cleaning the struct bpf_prog_info before another request, so the previous program length is still in there and kernel assumes it needs to dump the program, which fails because there's no user pointer set. Moving the struct bpf_prog_info declaration into the loop, so it gets cleaned before each query. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Reported-by: Lance Digby <ldigby@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23Merge tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds7-16/+118
Pull kselftest fixes from Shuah Khan: "Fixes to rtc, seccomp and other tests" * tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Abort without user notification support selftests: gpio-mockup-chardev: Check asprintf() for error selftests: seccomp: use LDLIBS instead of LDFLAGS selftests/vm/gup_benchmark.c: match gup struct to kernel tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded" selftests: rtc: rtctest: add alarm test on minute boundary selftests: rtc: rtctest: fix alarm tests
2019-01-22Merge tag 'perf-urgent-for-mingo-5.0-20190121' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgentIngo Molnar5-16/+28
Pull perf/urgent fixes from Arnaldo Carvalho de Melo: Kernel: Stephane Eranian: - Fix perf_proc_update_handler() bug. perf script: Andi Kleen: - Fix crash with printing mixed trace point and other events. Tony Jones: - Fix crash when processing recorded stat data. perf top: He Kuang: - Fix wrong hottest instruction highlighted. perf python: Arnaldo Carvalho de Melo: - Remove -fstack-clash-protection when building with some clang versions. perf ordered_events: Jiri Olsa: - Fix out of buffers crash in ordered_events__free(). perf cpu_map: Stephane Eranian: - Handle TOPOLOGY headers with no CPU. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-21nfit_test: fix security state pull for nvdimm security nfit_testDave Jiang1-2/+2
The override status function needs to be updated to use the proper request parameter in order to get the security state. Fixes: 3c13e2ac747a ("...Add test support for Intel nvdimm security DSMs") Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21perf script: Fix crash when processing recorded stat dataTony Jones1-5/+2
While updating perf to work with Python3 and Python2 I noticed that the stat-cpi script was dumping core. $ perf stat -e cycles,instructions record -o /tmp/perf.data /bin/false Performance counter stats for '/bin/false': 802,148 cycles 604,622 instructions 802,148 cycles 604,622 instructions 0.001445842 seconds time elapsed $ perf script -i /tmp/perf.data -s scripts/python/stat-cpi.py Segmentation fault (core dumped) ... ... rblist=rblist@entry=0xb2a200 <rt_stat>, new_entry=new_entry@entry=0x7ffcb755c310) at util/rblist.c:33 ctx=<optimized out>, type=<optimized out>, create=<optimized out>, cpu=<optimized out>, evsel=<optimized out>) at util/stat-shadow.c:118 ctx=<optimized out>, type=<optimized out>, st=<optimized out>) at util/stat-shadow.c:196 count=count@entry=727442, cpu=cpu@entry=0, st=0xb2a200 <rt_stat>) at util/stat-shadow.c:239 config=config@entry=0xafeb40 <stat_config>, counter=counter@entry=0x133c6e0) at util/stat.c:372 ... ... The issue is that since 1fcd03946b52 perf_stat__update_shadow_stats now calls update_runtime_stat passing rt_stat rather than calling update_stats but perf_stat__init_shadow_stats has never been called to initialize rt_stat in the script path processing recorded stat data. Since I can't see any reason why perf_stat__init_shadow_stats() is presently initialized like it is in builtin-script.c::perf_sample__fprint_metric() [4bd1bef8bba2f] I'm proposing it instead be initialized once in __cmd_script Committer testing: After applying the patch: # perf script -i /tmp/perf.data -s tools/perf/scripts/python/stat-cpi.py 0.001970: cpu -1, thread -1 -> cpi 1.709079 (1075684/629394) # No segfault. Signed-off-by: Tony Jones <tonyj@suse.de> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Fixes: 1fcd03946b52 ("perf stat: Update per-thread shadow stats") Link: http://lkml.kernel.org/r/20190120191414.12925-1-tonyj@suse.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-21perf top: Fix wrong hottest instruction highlightedHe Kuang1-6/+10
The annotation line percentage is compared and inserted into the rbtree, but the percent field of 'struct annotation_data' is an array, the comparison result between them is the address difference. This patch compares the right slot of percent array according to opts->percent_type and makes things right. The problem can be reproduced by pressing 'H' in perf top annotation view. It should highlight the instruction line which has the highest sampling percentage. Signed-off-by: He Kuang <hekuang@huawei.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190120160523.4391-1-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-21perf tools: Handle TOPOLOGY headers with no CPUStephane Eranian1-2/+9
This patch fixes an issue in cpumap.c when used with the TOPOLOGY header. In some configurations, some NUMA nodes may have no CPU (empty cpulist). Yet a cpumap map must be created otherwise perf abort with an error. This patch handles this case by creating a dummy map. Before: $ perf record -o - -e cycles noploop 2 | perf script -i - 0x6e8 [0x6c]: failed to process type: 80 After: $ perf record -o - -e cycles noploop 2 | perf script -i - noploop for 2 seconds Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-92/+1317
Pull networking fixes from David Miller: 1) Fix endless loop in nf_tables, from Phil Sutter. 2) Fix cross namespace ip6_gre tunnel hash list corruption, from Olivier Matz. 3) Don't be too strict in phy_start_aneg() otherwise we might not allow restarting auto negotiation. From Heiner Kallweit. 4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue. 5) Memory leak in act_tunnel_key, from Davide Caratti. 6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn. 7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet. 8) Missing udplite rehash callbacks, from Alexey Kodanev. 9) Log dirty pages properly in vhost, from Jason Wang. 10) Use consume_skb() in neigh_probe() as this is a normal free not a drop, from Yang Wei. Likewise in macvlan_process_broadcast(). 11) Missing device_del() in mdiobus_register() error paths, from Thomas Petazzoni. 12) Fix checksum handling of short packets in mlx5, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits) bpf: in __bpf_redirect_no_mac pull mac only if present virtio_net: bulk free tx skbs net: phy: phy driver features are mandatory isdn: avm: Fix string plus integer warning from Clang net/mlx5e: Fix cb_ident duplicate in indirect block register net/mlx5e: Fix wrong (zero) TX drop counter indication for representor net/mlx5e: Fix wrong error code return on FEC query failure net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames tools: bpftool: Cleanup license mess bpf: fix inner map masking to prevent oob under speculation bpf: pull in pkt_sched.h header for tooling to fix bpftool build selftests: forwarding: Add a test case for externally learned FDB entries selftests: mlxsw: Test FDB offload indication mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky net: bridge: Mark FDB entries that were added by user as such mlxsw: spectrum_fid: Update dummy FID index mlxsw: pci: Return error on PCI reset timeout mlxsw: pci: Increase PCI SW reset timeout mlxsw: pci: Ring CQ's doorbell before RDQ's MAINTAINERS: update email addresses of liquidio driver maintainers ...
2019-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller7-16/+1218
Daniel Borkmann says: ==================== pull-request: bpf 2019-01-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem. 2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter. 3) Fix map in map masking to prevent out-of-bounds access under speculative execution, from Daniel. 4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal pacing, from Yuchung. 5) Fix json writer license in bpftool, from Thomas. 6) Fix AF_XDP to check if an actually queue exists during umem setup, from Krzysztof. 7) Several fixes to BPF stackmap's build id handling. Another fix for bpftool build to account for libbfd variations wrt linking requirements, from Stanislav. 8) Fix BPF samples build with clang by working around missing asm goto, from Yonghong. 9) Fix libbpf to retry program load on signal interrupt, from Lorenz. 10) Various minor compile warning fixes in BPF code, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>