aboutsummaryrefslogtreecommitdiffstats
path: root/tools (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-05Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds1-1/+2
Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
2018-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-1/+59
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
2018-03-05selftests: forwarding: Add suppport to create veth interfacesDavid Ahern2-0/+40
For tests using veth interfaces, the test infrastructure can create the netdevs if they do not exist. Arguably this is a preferred approach since the tests require p$N and p$(N+1) to be pairs. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05selftests: Extend the tc action test for action mirrorArkadi Sharshevsky1-6/+10
Currently the tc action test is used only to test mirred redirect action. This patch extends it for mirred mirror. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04tc-testing: skbmod: fix match value of ethertypeDavide Caratti1-1/+1
iproute2 print_skbmod() prints the configured ethertype using format 0x%X: therefore, test 9aa8 systematically fails, because it configures action #4 using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing the expected value to 0x31 lets the test result 'not ok' become 'ok'. tested with: # ./tdc.py -e 9aa8 Test 9aa8: Get a single skbmod action from a list All test results: 1..1 ok 1 9aa8 Get a single skbmod action from a list Fixes: cf797ac49b94 ("tc-testing: Add test cases for police and skbmod") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04selftests: rtnetlink: remove testns on test failPrashant Bhole1-0/+6
This patch removes testns after test failure so that next test can continue with clean ns Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+5
Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
2018-03-04tools: tc-testing: Add notap optionBrenda J. Butler1-11/+23
Add a command line arg to suppress tap output. Handy in case all the tap output is being supplied by the plugins. Signed-off-by: Brenda J. Butler <bjb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04selftests: forwarding: Add multipath test for L4 hashingDavid Ahern1-0/+44
Add IPv6 multipath test using L4 hashing. Created with inputs from Ido Schimmel. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller19-361/+1253
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-03 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Extend bpftool to build up CFG information of eBPF programs and add an option to dump this in DOT format such that this can later be used with DOT graphic tools (xdot, graphviz, etc) to visualize it. Part of the analysis performed is sub-program detection and basic-block partitioning, from Jiong. 2) Multiple enhancements for bpftool's batch mode, more specifically the parser now understands comments (#), continuation lines (\), and arguments enclosed between quotes. Also, allow to read from stdin via '-' as input file, all from Quentin. 3) Improve BPF kselftests by i) unifying the rlimit handling into a helper that is then used by all tests, and ii) add support for testing tail calls to test_verifier plus add tests covering all corner cases. The latter is especially useful for testing JITs, from Daniel. 4) Remove x64 JIT's bpf_flush_icache() since flush_icache_range() is a noop on x64, from Daniel. 5) Fix one more occasion in BPF samples where we do not detach the BPF program from the cgroup after completion, from Prashant. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02selftests: memory-hotplug: fix emit_tests regressionShuah Khan1-1/+2
Commit 16c513b13477 ("selftests: memory-hotplug: silence test command echo") introduced regression in emit_tests and results in the following failure when selftests are installed and run. Fix it. Running tests in memory-hotplug ======================================== ./run_kselftest.sh: line 121: @./mem-on-off-test.sh: No such file or directory selftests: memory-hotplug [FAIL] Fixes: 16c513b13477 (selftests: memory-hotplug: silence test command echo") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-03-02tools: bpftool: add support for quotations in batch filesQuentin Monnet1-14/+51
Improve argument parsing from batch input files in order to support arguments enclosed between single (') or double quotes ("). For example, this command can now be parsed in batch mode: bpftool prog dump xlated id 1337 file "/tmp/my file with spaces" The function responsible for parsing command arguments is copied from its counterpart in lib/utils.c in iproute2 package. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02tools: bpftool: read from stdin when batch file name is "-"Quentin Monnet1-2/+6
Make bpftool read its command list from standard input when the name if the input file is a single dash. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02tools: bpftool: support continuation lines in batch filesQuentin Monnet1-4/+32
Add support for continuation lines, such as in the following example: prog show prog dump xlated \ id 1337 opcodes This patch is based after the code for support for continuation lines from file lib/utils.c from package iproute2. "Lines" in error messages are renamed as "commands", as we count the number of commands (but we ignore empty lines, comments, and do not add continuation lines to the count). Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-02tools: bpftool: support comments in batch filesQuentin Monnet1-0/+5
Replace '#' by '\0' in commands read from batch files in order to avoid processing the remaining part of the line, thus allowing users to use comments in the files. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+58
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-28 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Add schedule points and reduce the number of loop iterations the test_bpf kernel module is performing in order to not hog the CPU for too long, from Eric. 2) Fix an out of bounds access in tail calls in the ppc64 BPF JIT compiler, from Daniel. 3) Fix a crash on arm64 on unaligned BPF xadd operations that could be triggered via interpreter and JIT, from Daniel. Please not that once you merge net into net-next at some point, there is a minor merge conflict in test_verifier.c since test cases had been added at the end in both trees. Resolution is trivial: keep all the test cases from both trees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01tools: bpftool: add bash completion for CFG dumpQuentin Monnet1-4/+9
Add bash completion for the "visual" keyword used for dumping the CFG of eBPF programs with bpftool. Make sure we only complete with this keyword when we dump "xlated" (and not "jited") instructions. Acked-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: new command-line option and documentation for 'visual'Jiong Wang2-7/+23
This patch adds new command-line option for visualizing the xlated eBPF sequence. Documentations are updated accordingly. Usage: bpftool prog dump xlated id 2 visual Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: generate .dot graph from CFG informationJiong Wang3-0/+147
This patch let bpftool print .dot graph file into stdout. This graph is generated by the following steps: - iterate through the function list. - generate basic-block(BB) definition for each BB in the function. - draw out edges to connect BBs. This patch is the initial support, the layout and decoration of the .dot graph could be improved. Also, it will be useful if we could visualize some performance data from static analysis. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: add out edges for each basic-blockJiong Wang1-2/+160
This patch adds out edges for each basic-block. We will need these out edges to finish the .dot graph drawing. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: partition basic-block for each function in the CFGJiong Wang1-1/+117
This patch partition basic-block for each function in the CFG. The algorithm is simple, we identify basic-block head in a first traversal, then second traversal to identify the tail. We could build extended basic-block (EBB) in next steps. EBB could make the graph more readable when the eBPF sequence is big. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: detect sub-programs from the eBPF sequenceJiong Wang2-0/+190
This patch detect all sub-programs from the eBPF sequence and keep the information in the new CFG data structure. The detection algorithm is basically the same as the one in verifier except we need to use insn->off instead of insn->imm to get the pc-relative call offset. Because verifier has modified insn->off/insn->imm during finishing the verification. Also, we don't need to do some sanity checks as verifier has done them. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: factor out xlated dump related code into separate fileJiong Wang3-254/+349
This patch factors out those code of dumping xlated eBPF instructions into xlated_dumper.[h|c]. They are quite independent dumper functions, so better to be kept separately. New dumper support will be added in later patches in this set. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01tools: bpftool: remove unnecessary 'if' to reduce indentationJiong Wang1-20/+18
It is obvious we could use 'else if' instead of start a new 'if' in the touched code. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-01selftests: forwarding: Add description to the multipath testsDavid Ahern1-17/+20
Add a better description to the summary for multipath tests. e.g., INFO: Running IPv6 multipath tests TEST: ECMP [PASS] INFO: Expected ratio 1.00 Measured ratio 1.02 TEST: Weighted MP 2:1 [PASS] INFO: Expected ratio 2.00 Measured ratio 2.02 TEST: Weighted MP 11:45 [PASS] INFO: Expected ratio 4.09 Measured ratio 4.03 Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01selftests: forwarding: Use PING6 instead of ping for ipv6 multipath testDavid Ahern1-1/+1
On Debian jessie ping can not handle IPv6 addresses so the command fails. Use PING6 which is set to ping6. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01selftests: forwarding: Handle 0 for packet difference in multipath testsDavid Ahern1-0/+7
If the packet stats have a difference of 0, the test output shows: INFO: Expected ratio 2.00 Measured ratio Runtime error (func=(main), adr=9): Divide by zero (standard_in) 2: syntax error (standard_in) 1: syntax error ./router_multipath.sh: line 187: test: : integer expression expected TEST: Multipath [FAIL] Too large discrepancy between expected and measured ratios Handle the 0 and display a cleaner message: INFO: Running IPv6 multipath tests TEST: Multipath [FAIL] Packet difference is 0 Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01selftests: forwarding: Only check tc version for tc testsDavid Ahern7-15/+25
Capabilities of tc command are irrelevant for router tests: $ ./router.sh SKIP: iproute2 too old, missing shared block support Add a CHECK_TC flag and only check tc capabilities if set. Add flag to tc_common.sh and have it sourced before lib.sh Also, if the command lacks some feature the test should exit non-0. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28Merge tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftestLinus Torvalds8-16/+19
Pull kselftest fixes from Shuah Khan: "Fixes for various problems in test output, compile errors, and missing configs" * tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: update .gitignore with new test selftests: memory-hotplug: silence test command echo selftests/futex: Fix line continuation in Makefile selftests: memfd: add config fragment for fuse selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m selftests/android: Fix line continuation in Makefile selftest/vDSO: fix O= selftests: sync: missing CFLAGS while compiling
2018-02-28selftests: forwarding: Introduce basic shared blocks testsJiri Pirko2-0/+128
Test shared block infrastructure. This is a basic test that shares TC block in between 2 clsact qdiscs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Introduce basic tc chains testsJiri Pirko1-0/+122
Tests chains matching and goto chain action. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Introduce tc actions testsJiri Pirko1-0/+195
Add first part of actions tests. This patch only contains tests of gact ok/drop/trap and mirred redirect egress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Introduce tc flower matching testsJiri Pirko2-0/+219
Add first part of flower tests. This patch only contains dst/src ip/mac matching. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Allow to get netdev interfaces names from commandlineJiri Pirko1-0/+15
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add MAC get helperJiri Pirko1-0/+7
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add tc offload check helperJiri Pirko1-0/+13
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Test IPv6 weighted nexthopsIdo Schimmel1-0/+36
Have one host generate 16K IPv6 echo requests with a random flow label and check that they are distributed between both multipath links according to the provided weights. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Test IPv4 weighted nexthopsIdo Schimmel2-0/+91
Use different weights for the multipath route configured on the first router and check that the different flows generated by the first host are distributed according to the provided weights. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Create test topology for multipath routingIdo Schimmel1-0/+209
Create a topology with two hosts, each directly connected to a different router. Both routers are connected using two links, enabling multipath routing. Test IPv4 and IPv6 ping using default MTU and large MTU. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add a test for basic IPv4 and IPv6 routingIdo Schimmel2-0/+140
Configure two hosts which are directly connected to the same router and test IPv4 and IPv6 ping. Use a large MTU and check that ping is unaffected. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add a test for flooded trafficIdo Schimmel2-0/+90
Add test cases for unknown unicast and unregistered multicast flooding. For each traffic type, turn off flooding on one bridged port and inject a packet of the specified type through the second bridged port. Make sure the packet was not received by checking the ACL counters on the other end. Later, turn on flooding and make sure the packet was received. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add a test for FDB learningIdo Schimmel2-1/+96
Send a packet with a specific destination MAC, make sure it was learned on the ingress port and then aged-out. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28selftests: forwarding: Add initial testing frameworkIdo Schimmel6-0/+465
Add initial framework to test packet forwarding functionality. The tests can run on actual devices using loop-backed cables or using veth pairs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28objtool: Fix another switch table detection issueJosh Poimboeuf1-1/+5
Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
2018-02-27selftests/net: reap zerocopy completions passed up as ancillary data.Sowmini Varadhan1-8/+57
PF_RDS sockets pass up cookies for zerocopy completion as ancillary data. Update msg_zerocopy to reap this information. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27selftests/net: revert the zerocopy Rx path for PF_RDSSowmini Varadhan1-67/+0
In preparation for optimized reception of zerocopy completion, revert the Rx side changes introduced by Commit dfb8434b0a94 ("selftests/net: add zerocopy support for PF_RDS test case") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27selftests: Add fib-onlink-tests.sh to TEST_PROGSDavid Ahern1-1/+1
Fixes: 153e1b84f477 ("selftests: Add FIB onlink tests") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26bpf: add tail call tests to test_verifierDaniel Borkmann1-7/+110
One of the downsides of the test_bpf module was that since being in kernel space, it couldn't test-run tail calls. Now that the test_verifier has the ability to perform run-time tests, populate the prog array so we actually jump into other BPF programs and can check all corner cases. Most useful in combination with JITs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-26bpf: unify rlimit handling in selftestsDaniel Borkmann11-54/+44
Unify memlock handling into bpf_rlimit.h and replace all occurences in BPF kselftests with it. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-26selftests: vm: update .gitignore with new testShuah Khan1-0/+1
Update .gitignore with new test. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.