| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull Kselftest updates from Shuah Khan:
"Fixes to build and test failures:
- openat2 test failure for O_LARGEFILE flag on ARM64
- x86 test build failures related to glibc 2.34 adding support for
variable sized MINSIGSTKSZ and SIGSTKSZ
- removing obsolete configs in sync and cpufreq config files
- minor spelling and duplicate header include cleanups"
* tag 'linux-kselftest-next-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/cpufreq: Rename DEBUG_PI_LIST to DEBUG_PLIST
selftests/sync: Remove the deprecated config SYNC
selftests: safesetid: Fix spelling mistake "cant" -> "can't"
selftests/x86: Fix error: variably modified 'altstack_data' at file scope
kselftest:sched: remove duplicate include in cs_prctl_test.c
selftests: openat2: Fix testing failure for O_LARGEFILE flag
|
|
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
|
|
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
|
|
Since merged pages are copied every time they need to be modified, the
write access time is different between shared and non-shared pages. Add
ksm_cow_time() function which evaluates latency of these COW breaks.
First, 4000 pages are allocated and the time, required to modify 1 byte in
every other page, is measured. After this, the pages are merged into 2000
pairs and in each pair, 1 page is modified (i.e. they are decoupled) to
detect COW breaks. The time needed to break COW of merged pages is then
compared with performance of non-shared pages.
The test is run as follows: ./ksm_tests -C
The output:
Total size: 15 MiB
Not merged pages:
Total time: 0.002185489 s
Average speed: 3202.945 MiB/s
Merged pages:
Total time: 0.004386872 s
Average speed: 1595.670 MiB/s
Link: https://lkml.kernel.org/r/1d03ee0d1b341959d4b61672c6401d498bff5652.1629386192.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "add KSM performance tests", v3.
Extend KSM self tests with a performance benchmark. These tests are not
part of regular regression testing, as they are mainly intended to be used
by developers making changes to the memory management subsystem.
This patch (of 2):
Add ksm_merge_time() function to determine speed and time needed for
merging. The total spent time is shown in seconds while speed is in
MiB/s. User must specify the size of duplicated memory area (in MiB)
before running the test.
The test is run as follows: ./ksm_tests -P -s 100
The output:
Total size: 100 MiB
Total time: 0.201106786 s
Average speed: 497.248 MiB/s
Link: https://lkml.kernel.org/r/cover.1629386192.git.zhansayabagdaulet@gmail.com
Link: https://lkml.kernel.org/r/318b946ac80cc9205c89d0962048378f7ce0705b.1629386192.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add check_ksm_numa_merge() function to test that pages in different NUMA
nodes are being handled properly. First, two duplicate pages are
allocated in two separate NUMA nodes using the libnuma library. Since
there is one unique page in each node, with merge_across_nodes = 0, there
won't be any shared pages. If merge_across_nodes is set to 1, the pages
will be treated as usual duplicate pages and will be merged. If NUMA
config is not enabled or the number of NUMA nodes is less than two, then
the test is skipped. The test is run as follows: ./ksm_tests -N
Link: https://lkml.kernel.org/r/071c17b5b04ebb0dfeba137acc495e5dd9d2a719.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add check_ksm_zero_page_merge() function to test that empty pages are
being handled properly. For this, several zero pages are allocated and
merged using madvise. If use_zero_pages is enabled, the pages must be
shared with the special kernel zero pages; otherwise, they are merged as
usual duplicate pages. The test is run as follows: ./ksm_tests -Z
Link: https://lkml.kernel.org/r/6d0caab00d4bdccf5e3791cb95cf6dfd5eb85e45.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add check_ksm_unmerge() function to verify that KSM is properly unmerging
shared pages. For this, two duplicate pages are merged first and then
their contents are modified. Since they are not identical anymore, the
pages must be unmerged and the number of merged pages has to be 0. The
test is run as follows: ./ksm_tests -U
Link: https://lkml.kernel.org/r/c0f55420440d704d5b094275b4365aa1b2ad46b5.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "add KSM selftests".
Introduce selftests to validate the functionality of KSM. The tests are
run on private anonymous pages. Since some KSM tunables are modified,
their starting values are saved and restored after testing. At the start,
run is set to 2 to ensure that only test pages will be merged (we assume
that no applications make madvise syscalls in the background). If KSM
config not enabled, all tests will be skipped.
This patch (of 4):
Add check_ksm_merge() function to check the basic merging feature of KSM.
First, some number of identical pages are allocated and the MADV_MERGEABLE
advice is given to merge these pages. Then, pages_shared and
pages_sharing values are compared with the expected numbers using
assert_ksm_pages_count() function. The number of pages can be changed
using -p option.
Link: https://lkml.kernel.org/r/cover.1626252248.git.zhansayabagdaulet@gmail.com
Link: https://lkml.kernel.org/r/90287685c13300972ea84de93d1f3f900373f9fe.1626252248.git.zhansayabagdaulet@gmail.com
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When userfaultfd copy-ioctl fails since the PTE already exists, an -EEXIST
error is returned and the faulting thread is not woken. The current
userfaultfd test does not wake the faulting thread in such case. The
assumption is presumably that another thread set the PTE through copy/wp
ioctl and would wake the faulting thread or that alternatively the fault
handler would realize there is no need to "must_wait" and continue. This
is not necessarily true.
There is an assumption that the "must_wait" tests in handle_userfault()
are sufficient to provide definitive answer whether the offending PTE is
populated or not. However, userfaultfd_must_wait() test is lockless.
Consequently, concurrent calls to ptep_modify_prot_start(), for instance,
can clear the PTE and can cause userfaultfd_must_wait() to wrongly assume
it is not populated and a wait is needed.
There are therefore 3 options:
(1) Change the tests to wake on copy failure.
(2) Wake faulting thread unconditionally on zero/copy ioctls before
returning -EEXIST.
(3) Change the userfaultfd_must_wait() to hold locks.
This patch took the first approach, but the others are valid solutions
with different tradeoffs.
Link: https://lkml.kernel.org/r/20210808020724.1022515-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
flush_kernel_dcache_page is a rather confusing interface that implements a
subset of flush_dcache_page by not being able to properly handle page
cache mapped pages.
The only callers left are in the exec code as all other previous callers
were incorrect as they could have dealt with page cache pages. Replace
the calls to flush_kernel_dcache_page with calls to flush_dcache_page,
which for all architectures does either exactly the same thing, can
contains one or more of the following:
1) an optimization to defer the cache flush for page cache pages not
mapped into userspace
2) additional flushing for mapped page cache pages if cache aliases
are possible
Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a spelling mistake in an error message. Fix it.
Link: https://lkml.kernel.org/r/20210826121217.12885-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several test cases in the vm directory are still using exit 0
when they need to be skipped. Use the kselftest framework to skip code
instead so it can help us to distinguish the return status.
Criterion to filter out what should be fixed in vm directory:
grep -r "exit 0" -B1 | grep -i skip
This change might cause some false-positives if people are running these
test scripts directly and only checking their return codes, which will
change from 0 to 4. However I think the impact should be small as most of
our scripts here are already using this skip code. And there will be no
such issue if running them with the kselftest framework.
Link: https://lkml.kernel.org/r/20210823073433.37653-1-po-hsu.lin@canonical.com
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
|
|
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
|
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
|
|
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
|
|
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
|
|
Pull driver core updates from Greg KH:
"Here is the big set of driver core patches for 5.15-rc1.
These do change a number of different things across different
subsystems, and because of that, there were 2 stable tags created that
might have already come into your tree from different pulls that did
the following
- changed the bus remove callback to return void
- sysfs iomem_get_mapping rework
Other than those two things, there's only a few small things in here:
- kernfs performance improvements for huge numbers of sysfs users at
once
- tiny api cleanups
- other minor changes
All of these have been in linux-next for a while with no reported
problems, other than the before-mentioned merge issue"
* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
MAINTAINERS: Add dri-devel for component.[hc]
driver core: platform: Remove platform_device_add_properties()
ARM: tegra: paz00: Handle device properties with software node API
bitmap: extend comment to bitmap_print_bitmask/list_to_buf
drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
topology: use bin_attribute to break the size limitation of cpumap ABI
lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
sysfs: Rename struct bin_attribute member to f_mapping
sysfs: Invoke iomem_get_mapping() from the sysfs open callback
debugfs: Return error during {full/open}_proxy_open() on rmmod
zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
zorro: Simplify remove callback
sh: superhyway: Simplify check in remove callback
nubus: Simplify check in remove callback
nubus: Make struct nubus_driver::remove return void
kernfs: dont call d_splice_alias() under kernfs node lock
kernfs: use i_lock to protect concurrent inode updates
kernfs: switch kernfs to use an rwsem
kernfs: use VFS negative dentry caching
...
|
|
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
Pull move_mount updates from Christian Brauner:
"This contains an extension to the move_mount() syscall making it
possible to add a single private mount into an existing propagation
tree.
The use-case comes from the criu folks which have been struggling with
restoring complex mount trees for a long time. Variations of this work
have been discussed at Plumbers before, e.g.
https://www.linuxplumbersconf.org/event/7/contributions/640/
The extension to move_mount() enables criu to restore any set of mount
namespaces, mount trees and sharing group trees without introducing
yet more complexity into mount propagation itself.
The changes required to criu to make use of this and restore complex
propagation trees are available at
https://github.com/Snorch/criu/commits/mount-v2-poc
A cleaned-up version of this will go up for merging into the main criu
repo after this lands"
* tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest
move_mount: allow to add a mount into an existing group
|
|
DEBUG_PI_LIST was renamed to DEBUG_PLIST since
8e18faeac3 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
- It's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
CC: "Rafael J. Wysocki" <rjw@rjwysocki.net>
CC: Viresh Kumar <viresh.kumar@linaro.org>
CC: linux-pm@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
SYNC was removed since
aff9da10e21 ("staging/android: make sync_timeline internal to sw_sync")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_SYNC= of sync/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
* tip/sched/arm64: (785 commits)
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system
arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0
arm64: Implement task_cpu_possible_mask()
sched: Introduce dl_task_check_affinity() to check proposed affinity
sched: Allow task CPU affinity to be restricted on asymmetric systems
sched: Split the guts of sched_setaffinity() into a helper function
sched: Introduce task_struct::user_cpus_ptr to track requested affinity
sched: Reject CPU affinity changes based on task_cpu_possible_mask()
cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq()
cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()
cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1
sched: Introduce task_cpu_possible_mask() to limit fallback rq selection
sched: Cgroup SCHED_IDLE support
sched/topology: Skip updating masks for non-online nodes
Linux 5.14-rc6
lib: use PFN_PHYS() in devmem_is_allowed()
...
|
|
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull RCU updates from Paul McKenney:
"RCU changes for this cycle were:
- Documentation updates
- Miscellaneous fixes
- Offloaded-callbacks updates
- Updates to the nolibc library
- Tasks-RCU updates
- In-kernel torture-test updates
- Torture-test scripting, perhaps most notably the pinning of
torture-test guest OSes so as to force differences in memory
latency. For example, in a two-socket system, a four-CPU guest OS
will have one pair of its CPUs pinned to threads in a single core
on one socket and the other pair pinned to threads in a single core
on the other socket. This approach proved able to force race
conditions that earlier testing missed. Some of these race
conditions are still being tracked down"
* 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
torture: Replace deprecated CPU-hotplug functions.
rcu: Replace deprecated CPU-hotplug functions
rcu: Print human-readable message for schedule() in RCU reader
rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU
rcu: Use per_cpu_ptr to get the pointer of per_cpu variable
rcu: Remove useless "ret" update in rcu_gp_fqs_loop()
rcu: Mark accesses in tree_stall.h
rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack
rcu: Mark lockless ->qsmask read in rcu_check_boost_fail()
srcutiny: Mark read-side data races
rcu: Start timing stall repetitions after warning complete
rcu: Do not disable GP stall detection in rcu_cpu_stall_reset()
rcu/tree: Handle VM stoppage in stall detection
rculist: Unify documentation about missing list_empty_rcu()
rcu: Mark accesses to ->rcu_read_lock_nesting
rcu: Weaken ->dynticks accesses and updates
rcu: Remove special bit at the bottom of the ->dynticks counter
rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock
rcu: Fix to include first blocked task in stall warning
torture: Make kvm-test-1-run-qemu.sh check for reboot loops
...
|
|
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu"
file, which can temporarily record the mtu value of the last
received RA message when the RA mtu value is lower than the
interface mtu, but this proc has following limitations:
(1) when the interface mtu (/sys/class/net/<iface>/mtu) is
updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will
be updated to the value of interface mtu;
(2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect
ipv6 connection, and not affect ipv4.
Therefore, when the mtu option is carried in the RA message,
there will be a problem that the user sometimes cannot obtain
RA mtu value correctly by reading mtu6.
After this patch set, if a RA message carries the mtu option,
you can send a netlink msg which nlmsg_type is RTM_GETLINK,
and then by parsing the attribute of IFLA_INET6_RA_MTU to
get the mtu value carried in the RA message received on the
inet6 device. In addition, you can also get a link notification
when ra_mtu is updated so it doesn't have to poll.
In this way, if the MTU values that the device receives from
the network in the PCO IPv4 and the RA IPv6 procedures are
different, the user can obtain the correct ipv6 ra_mtu value
and compare the value of ra_mtu and ipv4 mtu, then the device
can use the lower MTU value for both IPv4 and IPv6.
Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This lock is not released if the program
return at the patched branch.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210827074140.118671-1-cyeaa@connect.ust.hk
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This patch adds similar retry logic to more places where read() is used, to
reduce flakyness in slow CI environment.
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825184745.2680830-1-fallentree@fb.com
|
|
Transactional Memory was removed from the architecture in ISA v3.1. For
threads running in P8/P9 compatibility mode on P10 a synthetic TM
implementation is provided. In this implementation, tbegin. always sets
cr0 eq meaning the abort handler is always called. This is not an issue
as users of TM are expected to have a fallback non transactional way to
make forward progress in the abort handler. The TEXASR indicates if a
transaction failure is due to a synthetic implementation.
Some of the TM self tests need a non-degenerate TM implementation for
their testing to be meaningful so check for a synthetic implementation
and skip the test if so.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729041317.366612-2-jniethe5@gmail.com
|
|
ISA v3.1 removes TM but includes a synthetic implementation for
backwards compatibility. With this implementation, the tests
ptrace-tm-spd-gpr and ptrace-tm-gpr should never be able to make any
forward progress and eventually should be killed by the timeout.
Instead on a P10 running in P9 mode, ptrace_tm_gpr fails like so:
test: ptrace_tm_gpr
tags: git_version:unknown
Starting the child
...
...
GPR[27]: 1 Expected: 2
GPR[28]: 1 Expected: 2
GPR[29]: 1 Expected: 2
GPR[30]: 1 Expected: 2
GPR[31]: 1 Expected: 2
[FAIL] Test FAILED on line 98
failure: ptrace_tm_gpr
selftests: ptrace-tm-gpr [FAIL]
The problem is in the inline assembly of the child. r0 is loaded with a
value in the child's transaction abort handler but this register is not
included in the clobbers list. This means it is possible that this
statement:
cptr[1] = 0;
which is meant to signal the parent to wait may actually use the value
placed into r0 by the inline assembly incorrectly signal the parent to
continue.
By inspection the same problem is present in ptrace-tm-spd-gpr.
Adding r0 to the clobbbers list makes the test fail correctly via a
timeout on a P10 running in P8/P9 compatibility mode.
Suggested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729041317.366612-1-jniethe5@gmail.com
|
|
This change extends the existing GRO coalesce test to
allow running on top of a veth pair, so that no H/W dep
is required to run them.
By default gro.sh will use the veth backend, and will try
to use exiting H/W in loopback mode if a specific device
name is provided with the '-i' command line option.
No functional change is intended for the loopback-based
tests, just move all the relevant initialization/cleanup
code into the related script.
Introduces a new initialization helper script for the
veth backend, and plugs the correct helper script according
to the provided command line.
Additionally, enable veth-based tests by default.
v1 -> v2:
- drop unused code in setup_veth_ns() - Willem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes the bpf_dctcp test to fallback to cubic by
using setsockopt(TCP_CONGESTION) when the tcp flow is not
ecn ready.
It also checks setsockopt() is not available to release().
The settimeo() from the network_helpers.h is used, so the local
one is removed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173026.3979130-1-kafai@fb.com
|
|
The next test requires to setsockopt(TCP_CONGESTION) before
connect(), so a new arg is needed for the connect_to_fd() to specify
the cc's name.
This patch adds a new "struct network_helper_opts" for the future
option needs. It starts with the "cc" and "timeout_ms" option.
A new helper connect_to_fd_opts() is added to take the new
"const struct network_helper_opts *opts" as an arg.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173019.3977910-1-kafai@fb.com
|
|
Add sk_state define to bpf_tcp_helpers.h. Rename the existing
global variable "sk_state" in the kfunc_call test to "sk_state_res".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210824173013.3977316-1-kafai@fb.com
|
|
A glibc 2.34 feature adds support for variable MINSIGSTKSZ and SIGSTKSZ.
When _DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ
and SIGSTKSZ are no longer constant on Linux. glibc 2.34 flags code paths
assuming MINSIGSTKSZ or SIGSTKSZ are constant. Fix these error in x86 test.
Feature description and build error:
NEWS for version 2.34
=====================
Major new features:
* Add _SC_MINSIGSTKSZ and _SC_SIGSTKSZ. When _DYNAMIC_STACK_SIZE_SOURCE
or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ are no longer
constant on Linux. MINSIGSTKSZ is redefined to sysconf(_SC_MINSIGSTKSZ)
and SIGSTKSZ is redefined to sysconf (_SC_SIGSTKSZ). This supports
dynamic sized register sets for modern architectural features like
Arm SVE.
=====================
If _SC_SIGSTKSZ_SOURCE or _GNU_SOURCE are defined, MINSIGSTKSZ and SIGSTKSZ
are redefined as:
/* Default stack size for a signal handler: sysconf (SC_SIGSTKSZ). */
# undef SIGSTKSZ
# define SIGSTKSZ sysconf (_SC_SIGSTKSZ)
/* Minimum stack size for a signal handler: SIGSTKSZ. */
# undef MINSIGSTKSZ
# define MINSIGSTKSZ SIGSTKSZ
Compilation will fail if the source assumes constant MINSIGSTKSZ or
SIGSTKSZ.
Build error with the GNU C Library 2.34:
DEBUG: | sigreturn.c:150:13: error: variably modified 'altstack_data' at file scope
| sigreturn.c:150:13: error: variably modified 'altstack_data' at file scope
DEBUG: | 150 | static char altstack_data[SIGSTKSZ];
| 150 | static char altstack_data[SIGSTKSZ];
DEBUG: | | ^~~~~~~~~~~~~
DEBUG: | single_step_syscall.c:60:22: error: variably modified 'altstack_data' at file scope
DEBUG: | 60 | static unsigned char altstack_data[SIGSTKSZ];
DEBUG: | | ^~~~~~~~~~~~~
Fixed commit log to improve formatting and clarity:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://sourceware.org/pipermail/libc-alpha/2021-January/121996.html
Link: https://sourceware.org/pipermail/libc-alpha/2021-August/129718.html
Suggested-by: Jianwei Hu <jianwei.hu@windriver.com>
Signed-off-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Clean up the following includecheck warning:
./tools/testing/selftests/sched/cs_prctl_test.c:
Include files sys/types.h and sys/wait.h are included more than
once.
No functional change.
Fixed commit header and log:
Shuah Khan <skhan@linuxfoundation.org>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The openat2 test suite fails on ARM64 because the definition of
O_LARGEFILE is different on ARM64. Fix the problem by defining
the correct O_LARGEFILE definition on ARM64.
"openat2 unexpectedly returned # 3['.../tools/testing/selftests/openat2']
with 208000 (!= 208000)
not ok 102 openat2 with incompatible flags (O_PATH | O_LARGEFILE) fails
with -22 (Invalid argument)"
Fixed change log to improve formatting and clarity:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Preface all options with opt_ and make them booleans.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-17-magnus.karlsson@gmail.com
|
|
Make enums lower case as that is the standard. Also drop the
unnecessary TEST_MODE_UNCONFIGURED mode.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-16-magnus.karlsson@gmail.com
|
|
Generate packets from a specification instead of something hard
coded. The idea is that a test generates one or more packet
specifications and provides it/them to both Tx and Rx. The Tx thread
will generate from this specification and Rx will validate that it
receives what is in the specification. The specification can be the
same on both ends, meaning that everything that was sent should be
received, or different which means that Rx will only receive part of
the sent packets.
Currently, the packet specification is the same for both Rx and Tx and
the same for each test. This will change in later work as features
and tests are added.
The data path functions are also renamed to better reflect what
actions they are performing after introducing this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-15-magnus.karlsson@gmail.com
|
|
Generate the packet directly in the umem instead of in a temporary
buffer that is copied out. Simplifies the code and improves
performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-14-magnus.karlsson@gmail.com
|
|
Simpify the cleanup of ifobjects right before the program exits by
introducing functions for creating and destroying these objects.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-13-magnus.karlsson@gmail.com
|
|
Decrease sending speed to avoid potentially overflowing some buffers
in the skb case that leads to dropped packets we cannot control (and
thus the tests may generate false negatives). Decrease batch size and
introduce a usleep in the transmit thread to not overflow the
receiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-12-magnus.karlsson@gmail.com
|
|
Validate the tx stats on the Tx thread instead of the Rx
thread. Depending on your settings, you might not be allowed to query
the statistics of a socket you do not own, so better to do this on the
correct thread to start with.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-11-magnus.karlsson@gmail.com
|
|
Simplify packet validation in the xsk selftests by performing it at
once for every packet. The current code performed this per batch and
did this on copied packet data. Make it simpler and faster by
validating it at once and on the umem packet data thus skipping the
copy and the memory allocation for the temprary buffer.
The optional packet dump feature is also simplified in the same
manner. Memory allocation and copying is removed and the dump is
performed directly on the umem data.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-10-magnus.karlsson@gmail.com
|
|
Rename worker_* functions that are not thread entry points to
something else. This was confusing. Now only thread entry points are
worker_something.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-9-magnus.karlsson@gmail.com
|
|
Disassociate the number of packets sent with the number of buffers in
the umem. This so we can loop over the umem to test more things. Set
the size of the umem to be a multiple of 2M. A requirement for huge
pages that are needed in unaligned mode.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-8-magnus.karlsson@gmail.com
|
Linus Torvalds
Zhansaya Bagdauletkyzy
Nadav Amit
Christoph Hellwig
Colin Ian King
Po-Hsu Lin
Li Zhijian
Catalin Marinas
Jakub Kicinski
Rocco Yue
Chengfeng Ye
Yucong Sun
Jordan Niethe
Paolo Abeni
Martin KaFai Lau
Jun Miao
Changcheng Deng
Baolin Wang
Magnus Karlsson