aboutsummaryrefslogtreecommitdiffstats
path: root/usr (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-19net: hns3: Fix client initialize state issue when roce client initialize failedJian Shen4-7/+26
When roce is loaded before nic, the roce client will not be initialized until nic client is initialized, but roce init flag is set before it. Furthermore, in this case of nic initialized success and roce failed, the nic init flag is not set, and roce init flag is not cleared. This patch fixes it by set init flag only after the client is initialized successfully. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Clear client pointer when initialize client failed or unintialize finishedJian Shen2-17/+41
If initialize client failed or finish uninitializing client, we should clear the client pointer. It may cause unexpected result when use uninitialized client. Meanwhile, we also should check whether client exist when uninitialize it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Fix cmdq registers initialization issue for vfJian Shen1-2/+2
According to hardware's description, the head pointer register should be written before the tail pointer register while initializing the vf command queue. Otherwise, it may trigger an interrupt even though there is no command received. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Fix for setting speed for phy failed problemFuyun Liang1-1/+1
The function of genphy_read_status is that reading phy information from HW and using these information to update SW variable. If user is using ethtool to setting the speed of phy and service task is calling by hclge_get_mac_phy_link, the result of speed setting is uncertain. Because ethtool cmd will modified phydev and hclge_get_mac_phy_link also will modified phydev. Because phy state machine will update phy link periodically, we can just use phydev->link to check the link status. This patch removes function call of genphy_read_status. To ensure accuracy, this patch adds a phy state check. If phy state is not PHY_RUNNING, we consider link is down. Because in some scenarios, phydev->link may be link up, but phy state is not PHY_RUNNING. This is just an intermediate state. In fact, the link is not ready yet. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Check hdev state when getting link statusPeng Li2-0/+6
By default, HW link status is up. If hclge_update_link_status is called before net up, driver will print "link up". It is not suitable. hdev state check is needed when getting link status. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Set STATE_DOWN bit of hdev state when stopping netFuyun Liang2-0/+4
We clear STATE_DOWN bit of hdev state when starting net, but do not set it again when stopping net. It causes that the net is down, but hdev state is still up. STATE_DOWN bit of hdev state should be set when stopping net. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add support for hns3_nic_netdev_ops.ndo_do_ioctlXi Wang3-0/+30
This patch adds the .ndo_do_ioctl net_device_ops operation to support the PHY MII ioctl for PF driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Remove packet statistics of publicPeng Li2-418/+0
All pf have permission to read packet statistics of public in hardware, but the read operation will clear registers which cause statistical inaccuracy. This patch removes all packet statistics of public. Signed-off-by: Junxin Chen <chenjunxin1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Remove tx budget to clean more TX descriptors in a napiPeng Li3-13/+8
The the actual Tx work is minimal, driver can clean up as more Tx descriptors as possible in a irq. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add unlikely for buf_num checkPeng Li1-1/+1
This patch adds unlikely for buf_num check. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: hns3: Add default irq affinityPeng Li2-0/+51
All irq will float to cpu0 if do not set irq affinity. This patch adds default irq affinity in hns3 driver, users can also change the irq affinity in OS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: sun: fix return type of ndo_start_xmit functionYueHaibing6-13/+17
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: amd: fix return type of ndo_start_xmit functionYueHaibing6-9/+13
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: broadcom: fix return type of ndo_start_xmit functionYueHaibing2-4/+5
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: xilinx: fix return type of ndo_start_xmit functionYueHaibing3-6/+9
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: toshiba: fix return type of ndo_start_xmit functionYueHaibing4-7/+9
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: marvell: fix return type of ndo_start_xmit functionYueHaibing3-3/+4
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvneta: do not explicitly set the carrier state in openAntoine Tenart1-3/+0
This patch removes the explicit call to netif_carrier_off() in mvneta_open() as this is already handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not explicitly set the carrier state in openAntoine Tenart1-1/+0
This patch removes the explicit call to netif_carrier_off() in PPv2's open() path, as this is now handled in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: phy: phylink: ensure the carrier is off when starting phylinkAntoine Tenart1-0/+3
Phylink made an assumption about the carrier state being down when calling phylink_start(). If this assumption isn't satisfied, the internal phylink state could misbehave and a net device could end up not being functional. This patch fixes this by explicitly calling netif_carrier_off() in phylink_start(). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: rename mvpp2_percpu function to mvpp2_threadAntoine Tenart1-47/+47
As the mvpp2_percpu_read/write/... functions aren't really per-cpu but per s/w thread, rename them to include 'thread' instead of 'percpu'. This is a cosmetic patch. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: handle cases where more CPUs are available than s/w threadsAntoine Tenart2-54/+112
The Marvell PPv2 network controller has 9 internal threads. The driver works fine when there are less CPUs available than threads. This isn't true if more CPUs are available. As this is a valid use case, handle this particular case. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: map the CPUs to threadsAntoine Tenart2-40/+55
This patch maps all uses of the CPU to threads. All this_cpu calls are replaced, and all smp_processor_id() calls are wrapped into the indirection. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not use the CPU number to access the per-thread registersAntoine Tenart1-81/+88
This patch reworks the Marvell PPv2 driver to stop using directly the CPU number to access per-thread registers. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: make mvpp2_read_relaxed staticAntoine Tenart2-3/+1
In the Marvell PPv2 driver the mvpp2_read_relaxed function is only used in a single file. Make it static and remove its prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: make the per-cpu helpers staticAntoine Tenart2-10/+3
The Marvell PPv2 driver has per-cpu functions. As they only are used in the main file, make them static and remove their prototype from the header. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: cpu should always be unsignedAntoine Tenart2-30/+35
Updates the PPv2 driver so that all CPU variables are unsigned, as it makes no sense to have a negative CPU number. This patch is cosmetic. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: fix the number of queues per cpu for PPv2.2Antoine Tenart2-4/+6
The Marvell PPv2.2 engine only has 8 Rx queues per CPU, while PPv2.1 has 16 of them. This patch updates the code so that the Rx queues mask width is selected given the version of the network controller used. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: do not update the queue mode while probingAntoine Tenart1-8/+9
This patch updates the probing function so that the queue mode isn't updated while probing, as the driver would silently end up using a configuration not wanted by the user. The patch adds an extra check to validate the chosen queue mode instead, and the driver will fail to probe if the configuration is invalid. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19Documentation/bindings: net: marvell-pp2: update the IRQs descriptionAntoine Tenart1-14/+31
This patch updates the interrupts part of the Marvell PPv2 driver bindings documentation, to keep it in sync with the driver. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: rename the IRQs to match the hardwareAntoine Tenart2-15/+46
This patch renames the IRQs in the Marvell PPv2 driver as their current names match the way they are used in software. But this will change in the future, and those IRQs have nothing to do with Rx/Tx interrupts (this can be configured). The new binding also describe more interrupts as some where left out. The old binding support is kept for backward compatibility. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: mvpp2: increase the number of s/w threads to 9Antoine Tenart1-1/+1
This patch sets the number of s/w threads to 9, its maximum value, instead of 8. This is not a fix as only 4 of the s/w threads were used so far, but more could be used in the future. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19ravb: remove tx buffer addr 4byte alilgnment restriction for R-Car Gen3Kazuya Mizuguchi2-57/+92
This patch sets from two descriptor to one descriptor because R-Car Gen3 does not have the 4 bytes alignment restriction of the transmission buffer. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: phy: call state machine synchronously in phy_stopHeiner Kallweit1-0/+2
phy_stop() may be called e.g. when suspending, therefore all needed actions should be performed synchronously. Therefore add a synchronous call to the state machine. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: linkwatch: add check for netdevice being present to linkwatch_do_devHeiner Kallweit1-1/+1
When bringing down the netdevice (incl. detaching it) and calling netif_carrier_off directly or indirectly the latter triggers an asynchronous linkwatch event. This linkwatch event eventually may fail to access chip registers in the ndo_get_stats/ndo_get_stats64 callback because the device isn't accessible any longer, see call trace in [0]. To prevent this scenario don't check for IFF_UP only, but also make sure that the netdevice is present. [0] https://lists.openwall.net/netdev/2018/03/15/62 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ti: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-3/+3
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: qede: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-1/+1
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: core: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-5/+5
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: sched: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-1/+1
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: iucv: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-1/+1
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: wan: remove redundant includezhong jiang2-2/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ethernet: remove redundant includezhong jiang4-4/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: neterion: vxge: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe3-20/+2
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: neterion: s2io: Use linux/io-64-nonatomic-lo-hi.hCorentin Labbe2-21/+2
This patch replace the custom definition of writeq/read and use ones defined in linux/io-64-nonatomic-lo-hi.h. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ibm: fix return type of ndo_start_xmit functionYueHaibing3-6/+7
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: cavium: fix return type of ndo_start_xmit functionYueHaibing4-6/+8
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: hns3: fix return type of ndo_start_xmit functionYueHaibing2-2/+3
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, also the implementation in this driver has returns 'netdev_tx_t' value, so just change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ethernet: slicoss: remove duplicated include from slic.hYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18veth: rename pcpu_vstats as pcpu_lstatsLi RongQing2-15/+8
struct pcpu_vstats and pcpu_lstats have same members and usage, and pcpu_lstats is used in many files, so rename pcpu_vstats as pcpu_lstats to reduce duplicate definition Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18netlink: add ethernet address policy typesJohannes Berg2-1/+20
Commonly, ethernet addresses are just using a policy of { .len = ETH_ALEN } which leaves userspace free to send more data than it should, which may hide bugs. Introduce NLA_EXACT_LEN which checks for exact size, rejecting the attribute if it's not exactly that length. Also add NLA_EXACT_LEN_WARN which requires the minimum length and will warn on longer attributes, for backward compatibility. Use these to define NLA_POLICY_ETH_ADDR (new strict policy) and NLA_POLICY_ETH_ADDR_COMPAT (compatible policy with warning); these are used like this: static const struct nla_policy <name>[...] = { [NL_ATTR_NAME] = NLA_POLICY_ETH_ADDR, ... }; Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.