| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds support for common clock framework on Nios2. Clock
framework is commonly used in many drivers, and this patch makes it
available for the entire architecture, not just on a per-driver basis.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
|
|
Add documentation of the binderfs 'stats' mount option.
Description taken from the commit message.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/baa0aa81-007d-af46-16a5-91fead0bd1b9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The previous fix had an off by one in the bd_openers checking, counting
the callers blkdev_get.
Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can't reliably wait in io_ring_ctx_wait_and_kill(), since the
task_works list isn't ordered (in fact it's LIFO ordered). We could
either fix this with a separate task_works list for io_uring work, or
just punt the wait-and-free to async context. This ensures that
task_work that comes in while we're shutting down is processed
correctly. If we don't go async, we could have work past the fput()
work for the ring that depends on work that won't be executed until
after we're done with the wait-and-free. But as this operation is
blocking, it'll never get a chance to run.
This was reproduced with hundreds of thousands of sockets running
memcached, haven't been able to reproduce this synthetically.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With amdgpu and CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y, there are
errors like:
BUG: non-zero pgtables_bytes on freeing mm
and:
BUG: Bad rss-counter state
with TTM transparent huge-pages.
Until we've figured out what other TTM drivers do differently compared to
vmwgfx, disable the huge_fault() callback, eliminating transhuge
page-table entries.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409164925.11912-1-thomas_os@shipmail.org
|
|
The noisy posix error message in readdir was supposed
to be an FYI (not enabled by default)
CIFS VFS: XXX dev 66306, reparse 0, mode 755
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
> (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
> Possible interrupt unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&pid->wait_pidfd);
> local_irq_disable();
> lock(tasklist_lock);
> lock(&pid->wait_pidfd);
> <Interrupt>
> lock(tasklist_lock);
>
> *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:
The problem is that because wait_pidfd.lock is taken under the tasklist
lock. It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.
Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock. That should be safe and I think the code will eventually
do that. It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.
It is also true that my pre-merge window testing was insufficient. So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things. I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.
It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals. That will require taking pid->lock with irqs disabled.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com
Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com
Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com
Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com
Fixes: 7bc3e6e55acf ("proc: Use a list of inodes to flush from proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Intel Comet Lake should use the default LPM policy for mobile chipsets.
So, add the PCI ID to the driver list of supported devices.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable")
introduced a regression for booting 32 bit Xen PV guests: the address
of the initial stack needs to be a virtual one.
Fixes: 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.
Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.
This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
(cherry picked from commit 83a196773b8bc6702f49df1eddc848180e350340)
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
drm_local_map.offset is not only used for resource_size_t but also
dma_addr_t which may be of different sizes.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: 8e4ff9b56957 ("drm: Remove the dma_alloc_coherent wrapper for internal usage")
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402215926.30714-1-chris@chris-wilson.co.uk
|
|
fixes unused variable warning.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using
dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update
type2name string table. This causes incorrect displaying of dma allocation
type.
Fix it by removing "page" string from type2name string table and switch to
use named initializers.
Before (dma_alloc_coherent()):
k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
After:
k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable
Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The upper 32-bit physical address gets truncated inadvertently
when dma_direct_get_required_mask() invokes phys_to_dma_direct().
This results in dma_addressing_limited() return incorrect value
when used in platforms with LPAE enabled.
Fix it here by explicitly type casting 'max_pfn' to phys_addr_t
in order to prevent overflow of intermediate value while evaluating
'(max_pfn - 1) << PAGE_SHIFT'.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494
https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
The 'AS' variable is unused for building the kernel. Only the remaining
usage is to turn on the integrated assembler. A boolean flag is a better
fit for this purpose.
AS=clang was added for experts. So, I replaced it with LLVM_IAS=1,
breaking the backward compatibility.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.
However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.
An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.
This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.
Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
__get_user_pages_locked() will return 0 instead of -EINTR after commit
4426e945df588 ("mm/gup: allow VM_FAULT_RETRY for multiple times") which
added extra code to allow gup detect fatal signal faster.
Restore the original -EINTR behavior.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 4426e945df58 ("mm/gup: allow VM_FAULT_RETRY for multiple times")
Reported-by: syzbot+3be1a33f04dc782e9fd5@syzkaller.appspotmail.com
Signed-off-by: Hillf Danton <hdanton@sina.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't re-read userspace-shared sqe->flags, it can be exploited.
sqe->flags are copied into req->flags in io_submit_sqe(), check them
there instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_get_req() do two different things: io_kiocb allocation and
initialisation. Move init part out of it and rename into
io_alloc_req(). It's simpler this way and also have better data
locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As io_get_sqe() split into 2 stage get/consume, get an sqe before
allocating io_kiocb, so no free_req*() for a failure case is needed,
and inline back __io_req_do_free(), which has only 1 user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make io_get_sqring() care only about sqes themselves, not initialising
the io_kiocb. Also, split it into get + consume, that will be helpful in
the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In io_read_prep() or io_write_prep(), io_req_map_rw() takes
struct io_async_rw's fast_iov as argument to call io_import_iovec(),
and if io_import_iovec() uses struct io_async_rw's fast_iov as
valid iovec array, later indeed io_req_map_rw() does not need
to do the memcpy operation, because they are same pointers.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
OPENAT2 correctly sets O_LARGEFILE if it has to, but that escaped the
OPENAT opcode. Dmitry reports that his test case that compares openat()
and IORING_OP_OPENAT sees failures on large files:
*** sync openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write succeeded
*** sync openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write succeeded
*** io_uring openat
openat succeeded
sync write at offset 0
write succeeded
sync write at offset 4294967296
write failed: File too large
*** io_uring openat
openat succeeded
io_uring write at offset 0
write succeeded
io_uring write at offset 4294967296
write failed: File too large
Ensure we set O_LARGEFILE, if force_o_largefile() is true.
Cc: stable@vger.kernel.org # v5.6
Fixes: 15b71abe7b52 ("io_uring: add support for IORING_OP_OPENAT")
Reported-by: Dmitry Kadashev <dkadashev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Staring v4.18, Kconfig evaluates compiler capabilities, and hides CONFIG
options your compiler does not support. This works well if you configure
and build the kernel on the same host machine.
It is inconvenient if you prepare the .config that is carried to a
different build environment (typically this happens when you package
the kernel for distros) because using a different compiler potentially
produces different CONFIG options than the real build environment.
So, you probably want to make as many options visible as possible.
In other words, you need to create a super-set of CONFIG options that
cover any build environment. If some of the CONFIG options turned out
to be unsupported on the build machine, they are automatically disabled
by the nature of Kconfig.
However, it is not feasible to get a full-featured compiler for every
arch.
This issue was discussed here:
https://lkml.org/lkml/2019/12/9/620
Other than distros, savedefconfig is also a problem. Some arch sub-systems
periodically resync defconfig files. If you use a less-capable compiler
for savedefconfig, options that do not meet 'depends on $(cc-option,...)'
will be forcibly disabled. So, 'make defconfig && make savedefconfig'
may silently change the behavior.
This commit adds a set of dummy toolchains that pretend to support any
feature.
Most of compiler features are tested by cc-option, which simply checks
the exit code of $(CC). The dummy tools are shell scripts that always
exit with 0. So, $(cc-option, ...) is evaluated as 'y'.
There are more complicated checks such as:
scripts/gcc-x86_{32,64}-has-stack-protector.sh
scripts/gcc-plugin.sh
scripts/tools-support-relr.sh
scripts/dummy-tools/gcc passes all checks.
From the top directory of the source tree, you can do:
$ make CROSS_COMPILE=scripts/dummy-tools/ oldconfig
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Tested-by: Jeremy Cline <jcline@redhat.com>
|
|
Kbuild supports not only obj-y but also lib-y to list objects linked to
vmlinux.
The difference between them is that all the objects from obj-y are
forcibly linked to vmlinux, whereas the objects from lib-y are linked
as needed; if there is no user of a lib-y object, it is not linked.
lib-y is intended to list utility functions that may be called from all
over the place (and may be unused at all), but it is a problem for
EXPORT_SYMBOL(). Even if there is no call-site in the vmlinux, we need
to keep exported symbols for the use from loadable modules.
Commit 7f2084fa55e6 ("[kbuild] handle exports in lib-y objects reliably")
worked around it by linking a dummy object, lib-ksyms.o, which contains
references to all the symbols exported from lib.a in that directory.
It uses the linker script command, EXTERN. Unfortunately, the meaning of
EXTERN of ld.lld is different from that of ld.bfd. Therefore, this does
not work with LD=ld.lld (CBL issue #515).
Anyway, the build rule of lib-ksyms.o is somewhat tricky. So, I want to
get rid of it.
At first, I was thinking of accumulating lib-y objects into obj-y
(or even replacing lib-y with obj-y entirely), but the lib-y syntax
is used beyond the ordinary use in lib/ and arch/*/lib/.
Examples:
- drivers/firmware/efi/libstub/Makefile builds lib.a, which is linked
into vmlinux in the own way (arm64), or linked to the decompressor
(arm, x86).
- arch/alpha/lib/Makefile builds lib.a which is linked not only to
vmlinux, but also to bootloaders in arch/alpha/boot/Makefile.
- arch/xtensa/boot/lib/Makefile builds lib.a for use from
arch/xtensa/boot/boot-redboot/Makefile.
One more thing, adding everything to obj-y would increase the vmlinux
size of allnoconfig (or tinyconfig).
For less impact, I tweaked the destination of lib.a at the top Makefile;
when CONFIG_MODULES=y, lib.a goes to KBUILD_VMLINUX_OBJS, which is
forcibly linked to vmlinux, otherwise lib.a goes to KBUILD_VMLINUX_LIBS
as before.
The size impact for normal usecases is quite small since at lease one
symbol in every lib-y object is eventually called by someone. In case
you are intrested, here are the figures.
x86_64_defconfig:
text data bss dec hex filename
19566602 5422072 1589328 26578002 1958c52 vmlinux.before
19566932 5422104 1589328 26578364 1958dbc vmlinux.after
The case with the biggest impact is allnoconfig + CONFIG_MODULES=y.
ARCH=x86 allnoconfig + CONFIG_MODULES=y:
text data bss dec hex filename
1175162 254740 1220608 2650510 28718e vmlinux.before
1177974 254836 1220608 2653418 287cea vmlinux.after
Hopefully this is still not a big deal. The per-file trimming with the
static library is not so effective after all.
If fine-grained optimization is desired, some architectures support
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, which trims dead code per-symbol
basis. When LTO is supported in mainline, even better optimization will
be possible.
Link: https://github.com/ClangBuiltLinux/linux/issues/515
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
As far as I understood, prom_meminit() in arch/mips/fw/arc/memory.c
is overridden by the one in arch/mips/sgi-ip32/ip32-memory.c if
CONFIG_SGI_IP32 is enabled.
The use of EXPORT_SYMBOL in static libraries potentially causes a
problem for the llvm linker [1]. So, I want to forcibly link lib-y
objects to vmlinux when CONFIG_MODULES=y.
As a groundwork, we must fix multiple definitions that have previously
been hidden by lib-y.
The prom_cleanup() in this file is already marked as __weak (because
it is overridden by the one in arch/mips/sgi-ip22/ip22-mc.c).
I think it should be OK to do the same for these two.
[1]: https://github.com/ClangBuiltLinux/linux/issues/515
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-By: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
I do not like to add an extra include path for every tool with no
good reason. This should be specified per file.
This line was added by commit 6520fe5564ac ("x86, realmode: 16-bit
real-mode code support for relocs tool"), which did not touch
anything else in scripts/. I see no reason to add this.
Also, remove the comment about kallsyms because we do not have any
for the rest of programs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
scripts/mkcompile_h uses $(CC) only for getting the version string.
I suspected there was a specific reason why the additional flags were
needed, and dug the commit history. This code dates back to at least
2002 [1], but I could not get any more clue.
Just get rid of it.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=29f3df7eba8ddf91a55183f9967f76fbcc3ab742
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
The tool is called llvm-size, not llvm-objsize.
Fixes: fcf1b6a35c16 ("Documentation/llvm: add documentation on building w/ Clang/LLVM")
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When doing Clang builds of the kernel, it is possible to link with
either ld.bfd (binutils) or ld.lld (LLVM), but it is not possible to
discover this from a running kernel. Add the "$LD -v" output to
/proc/version.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
There are a few items with wrong alignments. Solve them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The items described on those TODOs are already solved. So,
remove the comments.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
At least on my tests (building against Qt5.13), it seems to
me that, since Kernel 3.14, the split view mode is broken.
Maybe it was not a top priority during the conversion time.
Anyway, this patch changes the logic in order to properly
support the split view mode and the single view mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The port to Qt5 tried to preserve the same way as it used
to work with Qt3 and Qt4. However, at least with newer
versions of Qt5 (5.13), this doesn't work properly.
Change the schema by adding a vertical layout, in order
for it to start working properly again.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Both main config window and the item window have "Option"
name. That sounds weird, and makes harder to debug issues
of a window appearing at the wrong place.
So, change the title to reflect the contents of each
window.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The recommended way to initialize a null string is with
QString(). This is there at least since Qt5.5, with is
when qconf was ported to Qt5.
Fix those warnings:
scripts/kconfig/qconf.cc: In member function ‘void ConfigItem::updateMenu()’:
scripts/kconfig/qconf.cc:158:31: warning: ‘QString::null’ is deprecated: use QString() [-Wdeprecated-declarations]
158 | setText(noColIdx, QString::null);
| ^~~~
In file included from /usr/include/qt5/QtCore/qobject.h:47,
from /usr/include/qt5/QtWidgets/qwidget.h:45,
from /usr/include/qt5/QtWidgets/qmainwindow.h:44,
from /usr/include/qt5/QtWidgets/QMainWindow:1,
from scripts/kconfig/qconf.cc:9:
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Nobody was opposed to raising minimum GCC version to 4.8 [1]
So, we will drop GCC <= 4.7 support sooner or later.
We always use C++ compiler for building plugins for GCC >= 4.8.
This commit drops the plugin support for GCC <= 4.7 a bit earlier,
which allows us to dump lots of code.
[1] https://lkml.org/lkml/2020/1/23/545
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
|
|
Currently, we disable -Wtautological-compare, which in turn disables a
bunch of more specific tautological comparison warnings that are useful
for the kernel such as -Wtautological-bitwise-compare. See clang's
documentation below for the other warnings that are suppressed by
-Wtautological-compare. Now that all of the major/noisy warnings have
been fixed, enable -Wtautological-compare so that more issues can be
caught at build time by various continuous integration setups.
-Wtautological-constant-out-of-range-compare is kept disabled under a
normal build but visible at W=1 because there are places in the kernel
where a constant or variable size can change based on the kernel
configuration. These are not fixed in a clean/concise way and the ones
I have audited so far appear to be harmless. It is not a subgroup but
rather just one warning so we do not lose out on much coverage by
default.
Link: https://github.com/ClangBuiltLinux/linux/issues/488
Link: http://releases.llvm.org/10.0.0/tools/clang/docs/DiagnosticsReference.html#wtautological-compare
Link: https://bugs.llvm.org/show_bug.cgi?id=42666
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that the kernel specifies binutils 2.23 as the minimum version, we
can remove ifdefs for AVX2 and ADX throughout.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Regular files opened with O_NONBLOCK allow read to return after a single
round-trip with the server instead of trying to fill buffer.
Add a few lines in 9p documentation to describe that.
Link: http://lkml.kernel.org/r/1586193572-1375-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
|
|
poly1305-x86_64-cryptogams.S is a generated file, so it should be
cleaned up by 'make clean'.
Assigning it to the variable 'targets' teaches Kbuild that it is a
generated file. However, this line is not evaluated when cleaning
because scripts/Makefile.clean does not include include/config/auto.conf.
Remove the ifneq-conditional, so this file is correctly cleaned up.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
|
|
The currently minimum-supported binutils version 2.21 has the problem of
promoting symbols which are defined outside of a section into absolute.
According to Arvind:
binutils-2.21 and -2.22. An x86-64 defconfig will fail with
Invalid absolute R_X86_64_32S relocation: _etext
and after fixing that one, with
Invalid absolute R_X86_64_32S relocation: __end_of_kernel_reserve
Those two versions of binutils have a bug when it comes to handling
symbols defined outside of a section and binutils 2.23 has the proper
fix, see: https://sourceware.org/legacy-ml/binutils/2012-06/msg00155.html
Therefore, up to the fixed version directly, skipping the broken ones.
Currently shipping distros already have the fixed binutils version so
there should be no breakage resulting from this.
For more details about the whole thing, see the thread in Link.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110202349.1881840-1-nivedita@alum.mit.edu
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Since we're doing a static inline dispatch here, we normally branch
based on whether or not there's an arch implementation. That would have
been fine in general, except the crypto Makefile prior used to turn
things off -- despite the Kconfig -- resulting in us needing to also
hard code various assembler things into the dispatcher too. The horror!
Now that the assembler config options are done by Kconfig, we can get
rid of the inconsistency.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Now that assembler capabilities are probed inside of Kconfig, we can set
up proper Kconfig-based dependencies. We also take this opportunity to
reorder the Makefile, so that items are grouped logically by primitive.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
Dragos Bogdan
Randy Dunlap
Christoph Hellwig
Jens Axboe
Thomas Hellstrom (VMware)
Steve French
Eric W. Biederman
Pavel Begunkov
Jian-Hong Pan
Juergen Gross
Marek Szyprowski
Chris Wilson
Alex Deucher
Aaron Liu
Evan Quan
Prike Liang
Grygorii Strashko
Kishon Vijay Abraham I
Masahiro Yamada
Fredrik Strupe
Mike Marshall
Hillf Danton
Xiaoguang Wang
Fangrui Song
Kees Cook
Mauro Carvalho Chehab
Nathan Chancellor
Jason A. Donenfeld
Dominique Martinet
Borislav Petkov