Age | Commit message (Collapse) | Author | Files | Lines |
|
We got another syzbot report [1] that tells us we must use
write_lock_irq()/write_unlock_irq() to avoid possible deadlock.
[1]
WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
_raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
tiocsetd drivers/tty/tty_io.c:2337 [inline]
tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
vfs_ioctl fs/ioctl.c:47 [inline]
file_ioctl fs/ioctl.c:545 [inline]
do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
__do_sys_ioctl fs/ioctl.c:756 [inline]
__se_sys_ioctl fs/ioctl.c:754 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(disc_data_lock);
<Interrupt>
lock(disc_data_lock);
*** DEADLOCK ***
5 locks held by syz-executor826/9605:
#0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
#1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116
#3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823
#4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288
stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
valid_state kernel/locking/lockdep.c:3112 [inline]
mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
mark_usage kernel/locking/lockdep.c:3554 [inline]
__lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
__raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
_raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
__handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
</IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
__mutex_lock_common kernel/locking/mutex.c:962 [inline]
__mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
__fput+0x2ff/0x890 fs/file_table.c:280
____fput+0x16/0x20 fs/file_table.c:313
task_work_run+0x145/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x8e7/0x2ef0 kernel/exit.c:797
do_group_exit+0x135/0x360 kernel/exit.c:895
__do_sys_exit_group kernel/exit.c:906 [inline]
__se_sys_exit_group kernel/exit.c:904 [inline]
__x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000
Fixes: 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Michal Kubecek and Firo Yang did a very nice analysis of crashes
happening in __inet_lookup_established().
Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN
(via a close()/socket()/listen() cycle) without a RCU grace period,
I should not have changed listeners linkage in their hash table.
They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt),
so that a lookup can detect a socket in a hash list was moved in
another one.
Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve
merge conflict for v4/v6 ordering fix"), we have to add
hlist_nulls_add_tail_rcu() helper.
Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Firo Yang <firo.yang@suse.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
This conditional is missing a bang, with the intent
being to break when the retry count reaches zero.
Fixes: 476d96ca9cc5 ("ibmvnic: Bound waits for device queries")
Suggested-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
In commit 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for
doit handlers") we add strict check for inet6_rtm_getaddr(). But we did
the invalid header values check before checking if NETLINK_F_STRICT_CHK
is set. This may break backwards compatibility if user already set the
ifm->ifa_prefixlen, ifm->ifa_flags, ifm->ifa_scope in their netlink code.
I didn't move the nlmsg_len check because I thought it's a valid check.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4b1373de73a3 ("net: ipv6: addr: perform strict checks also for doit handlers")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Without I2C, we get a link failure:
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3':
ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init':
ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver'
drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit':
ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver'
Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
After executing "ethtool -C eth0 rx-usecs-irq 0", the box becomes
unresponsive, likely due to interrupt livelock. It appears that
a minimum clamp value for the irq timer is computed, but is never
applied.
Fix by applying the corrected clamp value.
Fixes: 74706afa712d ("bnxt_en: Update interrupt coalescing logic.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
I no longer work at Savoir-faire Linux but even though MAINTAINERS is
up-to-date, some emails are still sent to my old email address.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Add myself and Sean as maintainers for rmnet driver.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Driver doesn't accommodate the configuration for max number
of multicast mac addresses, in such particular case it leaves
the device with improper/invalid multicast configuration state,
causing connectivity issues (in lacp bonding like scenarios).
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lan78xx driver accesses the PHY registers through MDIO bus over USB
connection. When performing a suspend/resume, the PHY registers can be
accessed before the USB connection is resumed. This will generate an
error and will prevent the device to resume correctly.
This patch adds the dependency between the MDIO bus and USB device to
allow correct handling of suspend/resume.
Fixes: ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.
This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.
Fixes: 1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, when this sample is added, commit 1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.
This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.
Fixes: 1c47910ef8013 ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
|