aboutsummaryrefslogtreecommitdiffstats
path: root/virt (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-20net: use core MTU range checking in WAN driversJarod Wilson22-42/+7
- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu - sent max_mtu in lec driver, remove lec_change_mtu - set min/max_mtu in x25_asy driver CC: netdev@vger.kernel.org CC: Krzysztof Halasa <khc@pm.waw.pl> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Jan "Yenya" Kasprzak <kas@fi.muni.cz> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Kevin Curtis <kevin.curtis@farsite.co.uk> CC: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in wireless driversJarod Wilson13-119/+34
- set max_mtu in wil6210 driver - set max_mtu in atmel driver - set min/max_mtu in cisco airo driver, remove airo_change_mtu - set min/max_mtu in ipw2100/ipw2200 drivers, remove libipw_change_mtu - set min/max_mtu in p80211netdev, remove wlan_change_mtu - set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu - set min/max_mtu in wimax/i2400m and remove i2400m_change_mtu - set min/max_mtu in intersil/hostap and remove prism2_change_mtu - set min/max_mtu in intersil/orinoco - set min/max_mtu in tty/n_gsm and remove gsm_change_mtu CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Maya Erez <qca_merez@qca.qualcomm.com> CC: Simon Kelley <simon@thekelleys.org.uk> CC: Stanislav Yakovlev <stas.yakovlev@gmail.com> CC: Johannes Berg <johannes@sipsolutions.net> CC: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in USB NIC driversJarod Wilson9-44/+25
usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: netdev@vger.kernel.org CC: Woojung Huh <woojung.huh@microchip.com> CC: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: Hayes Wang <hayeswang@realtek.com> CC: Oliver Neukum <oneukum@suse.com> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson22-108/+68
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20myri10ge: fix typo in parameter descriptionWei Yongjun1-1/+1
Fix typo in parameter description. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: ethernet: mediatek: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in mtk_start_xmit() which can be called from hard irq context (netpoll) and from other contexts. mtk_start_xmit() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20dwc_eth_qos: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in dwceqos_start_xmit() which can be called from hard irq context (netpoll) and from other contexts. dwceqos_start_xmit() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: phy: aquantia: add PHY ID of AQR106 and AQR107Shaohui Xie1-0/+28
The AQR106 and AQR107 can use the existing driver. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: fec: drop check for clk==NULL before calling clk_*Uwe Kleine-König1-14/+11
clk_prepare, clk_enable and their counterparts (at least the common clk ones, but also most others) do check for the clk being NULL anyhow (and return 0 then), so there is no gain when the caller checks, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20tcp: relax listening_hash operationsEric Dumazet2-15/+7
softirq handlers use RCU protection to lookup listeners, and write operations all happen from process context. We do not need to block BH for dump operations. Also SYN_RECV since request sockets are stored in the ehash table : 1) inet_diag_dump_icsk() no longer need to clear cb->args[3] and cb->args[4] that were used as cursors while iterating the old per listener hash table. 2) Also factorize a test : No need to scan listening_hash[] if r->id.idiag_dport is not zero. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: smc91x: fix neponset breakage by pxa u16 writesRobert Jarzmik1-0/+2
The patch isolating the u16 writes for pxa assumed all machine_is_*() calls were removed, and therefore removed the mach-types.h include which provided them. Unfortunately 2 machine_is_*() remained in smc91x.c file including smc91x.h from which the include was removed, triggering the error: drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_drv_probe’: drivers/net/ethernet/smsc/smc91x.c:2380:2: error: implicit declaration of function ‘machine_is_assabet’ [-Werror=implicit-function-declaration] if (machine_is_assabet() && machine_has_neponset()) This adds back the wrongly removed include. Fixes: d09d747ae4c2 ("net: smc91x: isolate u16 writes alignment workaround") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ila: Fix tailroom allocation of lwtstateThomas Graf1-1/+1
Tailroom is supposed to be of length sizeof(struct ila_lwt) but sizeof(struct ila_params) is currently allocated. This leads to the dst_cache and connected member of ila_lwt being referenced out of bounds. struct ila_lwt { struct ila_params p; struct dst_cache dst_cache; u32 connected : 1; }; Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: macb: Add ethtool get_ringparam and set_ringparam functionalityZach Brown1-0/+59
Some applications want to tune the size of the macb rx/tx ring buffers. The ethtool set_ringparam function is the standard way of doing it. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: macb: Use variables with defaults for tx/rx ring sizes instead of hardcoded valuesZach Brown2-52/+65
The macb driver hardcoded the tx/rx ring sizes. This made it impossible to change the sizes at run time. Add tx_ring_size, and rx_ring_size variables to macb object, which are initilized with default vales during macb_init. Change all references to RX_RING_SIZE and TX_RING_SIZE to their respective replacements. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: arc_emac: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in arc_emac_tx() which can be called from hard irq context (netpoll) and from other contexts. arc_emac_tx() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unnecessary EXPORT_SYMBOLsJiri Benc3-4/+0
Some symbols exported to other modules are really used only by openvswitch.ko. Remove the exports. Tested by loading all 4 openvswitch modules, nothing breaks. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19openvswitch: remove unused functionsJiri Benc2-17/+0
ovs_vport_deferred_free is not used anywhere. It's the only caller of free_vport_rcu thus this one can be removed, too. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19bpf: Detect identical PTR_TO_MAP_VALUE_OR_NULL registersThomas Graf3-17/+118
A BPF program is required to check the return register of a map_elem_lookup() call before accessing memory. The verifier keeps track of this by converting the type of the result register from PTR_TO_MAP_VALUE_OR_NULL to PTR_TO_MAP_VALUE after a conditional jump ensures safety. This check is currently exclusively performed for the result register 0. In the event the compiler reorders instructions, BPF_MOV64_REG instructions may be moved before the conditional jump which causes them to keep their type PTR_TO_MAP_VALUE_OR_NULL to which the verifier objects when the register is accessed: 0: (b7) r1 = 10 1: (7b) *(u64 *)(r10 -8) = r1 2: (bf) r2 = r10 3: (07) r2 += -8 4: (18) r1 = 0x59c00000 6: (85) call 1 7: (bf) r4 = r0 8: (15) if r0 == 0x0 goto pc+1 R0=map_value(ks=8,vs=8) R4=map_value_or_null(ks=8,vs=8) R10=fp 9: (7a) *(u64 *)(r4 +0) = 0 R4 invalid mem access 'map_value_or_null' This commit extends the verifier to keep track of all identical PTR_TO_MAP_VALUE_OR_NULL registers after a map_elem_lookup() by assigning them an ID and then marking them all when the conditional jump is observed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Josef Bacik <jbacik@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: fs_enet: Use net_device_stats from struct net_deviceTobias Klauser2-26/+18
Instead of using a private copy of struct net_device_stats in struct fs_enet_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18qed: Remove useless set memory to zero use memset()Wei Yongjun1-1/+0
The memory return by kzalloc() has already be set to zero, so remove useless memset(0). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: dsa: mv88e6xxx: fix non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/net/dsa/mv88e6xxx/chip.c:2866:5: warning: symbol 'mv88e6xxx_g1_set_switch_mac' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18r8152: add new products of Lenovohayeswang2-1/+33
Add the following four products of Lenovo and sort the order of the list. VID PID 0x17ef 0x3062 0x17ef 0x3069 0x17ef 0x720c 0x17ef 0x7214 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: vlan: Use sizeof instead of literal numberGao Feng1-2/+2
Use sizeof variable instead of literal number to enhance the readability. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: smsc91x: add u16 workaround for pxa platformsRobert Jarzmik1-0/+2
Add a workaround for mainstone, idp and stargate2 boards, for u16 writes which must be aligned on 32 bits addresses. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: smc91x: take into account half-word workaroundRobert Jarzmik1-0/+2
For device-tree builds, platforms such as mainstone, idp and stargate2 must have their u16 writes all aligned on 32 bit boundaries. This is already enabled in platform data builds, and this patch adds it to device-tree builds. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: smc91x: isolate u16 writes alignment workaroundRobert Jarzmik3-40/+47
Writes to u16 has a special handling on 3 PXA platforms, where the hardware wiring forces these writes to be u32 aligned. This patch isolates this handling for PXA platforms as before, but enables this "workaround" to be set up dynamically, which will be the case in device-tree build types. This patch was tested on 2 PXA platforms : mainstone, which relies on the workaround, and lubbock, which doesn't. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ARM: pxa: enhance smc91x platform dataRobert Jarzmik4-0/+4
Instead of having the smc91x driver relying on machine_is_*() calls, provide this data through platform data, ie. idp, mainstone and stargate. This way, the driver doesn't need anymore machine_is_*() calls, which wouldn't work anymore with a device-tree build. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/sfc: use core min/max MTU checkingBert Kenward1-12/+2
Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: phy: leds: add support for led triggers on phy link state changeZach Brown7-0/+214
Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: phy: Create phy_supported_speeds function which lists speeds currently supported by a phydeviceZach Brown2-0/+50
phy_supported_speeds provides a means to get a list of all the speeds a phy device currently supports. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: phy: Encapsulate actions performed during link state changes into function phy_adjust_linkZach Brown1-8/+13
During phy state machine state transitions some set of actions should occur whenever the link state changes. These actions should be encapsulated into a single function This patch adds the phy_adjust_link function, which is called whenever phydev->adjust_link would have been called before. Actions that should occur whenever the phy link is adjusted can now be added to the phy_adjust_link function. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18skge: Rename LED_OFF and LED_ON in marvel skge driver to avoid conflicts with leds namespaceZach Brown2-5/+5
Adding led support for phy causes namespace conflicts for some phy drivers. The marvel skge driver declared an enum for representing the states of Link LED Register. The enum contained constant LED_OFF which conflicted with declartation found in linux/leds.h. LED_OFF changed to LED_REG_OFF Also changed LED_ON to LED_REG_ON to avoid possible future conflict and for consistency. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: dev: Improve debug statements for adjacency trackingDavid Ahern1-7/+15
Adjacency code only has debugs for the insert case. Add debugs for the remove path and make both consistently worded to make it easier to follow the insert and removal with reference counts. In addition, change the BUG to a WARN_ON. A missing adjacency at removal time is not cause for a panic. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: Add warning if any lower device is still in adjacency listDavid Ahern1-0/+15
Lower list should be empty just like upper. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: Remove all_adj_list and its referencesDavid Ahern2-230/+18
Only direct adjacencies are maintained. All upper or lower devices can be learned via the new walk API which recursively walks the adj_list for upper devices or lower devices. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18rocker: Flip to the new dev walk APIDavid Ahern1-7/+24
Convert rocker to the new dev walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18mlxsw: Flip to the new dev walk APIDavid Ahern1-14/+23
Convert mlxsw users to new dev walk API. This is just a code conversion; no functional change is intended. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ixgbe: Flip to the new dev walk APIDavid Ahern1-50/+82
Convert ixgbe users to new dev walk API. This is just a code conversion; no functional change is intended. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18IB/ipoib: Flip to new dev walk APIDavid Ahern1-12/+25
Convert ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18IB/core: Flip to the new dev walk APIDavid Ahern2-27/+24
Convert rdma_is_upper_dev_rcu, handle_netdev_upper and ipoib_get_net_dev_match_addr to the new upper device walk API. This is just a code conversion; no functional change is intended. v2 - removed typecast of data Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: bonding: Flip to the new dev walk APIDavid Ahern2-38/+61
Convert alb_send_learning_packets and bond_has_this_ip to use the new netdev_walk_all_upper_dev_rcu API. In both cases this is just a code conversion; no functional change is intended. v2 - removed typecast of data and simplified bond_upper_dev_walk Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: Introduce new api for walking upper and lower devicesDavid Ahern2-0/+172
This patch introduces netdev_walk_all_upper_dev_rcu, netdev_walk_all_lower_dev and netdev_walk_all_lower_dev_rcu. These functions recursively walk the adj_list of devices to determine all upper and lower devices. The functions take a callback function that is invoked for each device in the list. If the callback returns non-0, the walk is terminated and the functions return that code back to callers. v3 - simplified netdev_has_upper_dev_all_rcu and __netdev_has_upper_dev and removed typecast as suggested by Stephen v2 - fixed definition of netdev_next_lower_dev_rcu to mirror the upper_dev version. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: Remove refnr arg when inserting link adjacenciesDavid Ahern1-15/+12
Commit 93409033ae65 ("net: Add netdev all_adj_list refcnt propagation to fix panic") propagated the refnr to insert and remove functions tracking the netdev adjacency graph. However, for the insert path the refnr can only be 1. Accordingly, remove the refnr argument to make that clear. ie., the refnr arg in 93409033ae65 was only needed for the remove path. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18bpf: add initial suite for selftestsDaniel Borkmann12-765/+1096
Add a start of a test suite for kernel selftests. This moves test_verifier and test_maps over to tools/testing/selftests/bpf/ along with various code improvements and also adds a script for invoking test_bpf module. The test suite can simply be run via selftest framework, f.e.: # cd tools/testing/selftests/bpf/ # make # make run_tests Both test_verifier and test_maps were kind of misplaced in samples/bpf/ directory and we were looking into adding them to selftests for a while now, so it can be picked up by kbuild bot et al and hopefully also get more exposure and thus new test case additions. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18bpf: add various tests around spill/fill of regsDaniel Borkmann1-0/+116
Add several spill/fill tests. Besides others, one that performs xadd on the spilled register, one ldx/stx test where different types are spilled from two branches and read out from common path. Verfier does handle all correctly. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson33-222/+169
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/toshiba: use core min/max MTU checkingJarod Wilson4-41/+8
gelic_net: min_mtu 64, max_mtu 1518 - remove gelic_net_change_mtu now that it is redundant spidernet: min_Mtu 64, max_mtu 2294 - remove spiter_net_change_mtu now that it is redundant CC: netdev@vger.kernel.org CC: Geoff Levand <geoff@infradead.org> CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/tile: use core min/max MTU checkingJarod Wilson2-35/+13
tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam - remove tile_net_change_mtu now that it is fully redundant tilepro: min_mtu 68, max_mtu 1500 - hardware supports jumbo packets up to 10226, but it's not implemented or tested yet, according to code comments CC: netdev@vger.kernel.org CC: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/ibm: use core min/max MTU checkingJarod Wilson2-13/+9
ehea: min_mtu 68, max_mtu 9022 - remove ehea_change_mtu, it's now redundant emac: min_mtu 46, max_mtu 1500 or whatever gets read from OF CC: netdev@vger.kernel.org CC: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet/cavium: use core min/max MTU checkingJarod Wilson4-28/+12
liquidio: min_mtu 68, max_mtu 16000 thunder: min_mtu 64, max_mtu 9200 CC: netdev@vger.kernel.org CC: Sunil Goutham <sgoutham@cavium.com> CC: Robert Richter <rric@kernel.org> CC: Derek Chickles <derek.chickles@caviumnetworks.com> CC: Satanand Burla <satananda.burla@caviumnetworks.com> CC: Felix Manlunas <felix.manlunas@caviumnetworks.com> CC: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.