From 10ffebbed5503b1830c7920ef528075785351be6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jun 2019 14:52:44 -0300 Subject: docs: fault-injection: convert docs to ReST and rename to *.rst The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab Acked-by: Federico Vaga Signed-off-by: Jonathan Corbet --- Documentation/fault-injection/fault-injection.rst | 446 +++++++++++++++++++++ Documentation/fault-injection/fault-injection.txt | 435 -------------------- Documentation/fault-injection/index.rst | 20 + .../fault-injection/notifier-error-inject.rst | 98 +++++ .../fault-injection/notifier-error-inject.txt | 94 ----- .../fault-injection/nvme-fault-injection.rst | 120 ++++++ .../fault-injection/nvme-fault-injection.txt | 116 ------ Documentation/fault-injection/provoke-crashes.rst | 48 +++ Documentation/fault-injection/provoke-crashes.txt | 38 -- Documentation/process/4.Coding.rst | 2 +- .../translations/it_IT/process/4.Coding.rst | 2 +- .../translations/zh_CN/process/4.Coding.rst | 2 +- drivers/misc/lkdtm/core.c | 2 +- include/linux/fault-inject.h | 2 +- lib/Kconfig.debug | 2 +- tools/testing/fault-injection/failcmd.sh | 2 +- 16 files changed, 739 insertions(+), 690 deletions(-) create mode 100644 Documentation/fault-injection/fault-injection.rst delete mode 100644 Documentation/fault-injection/fault-injection.txt create mode 100644 Documentation/fault-injection/index.rst create mode 100644 Documentation/fault-injection/notifier-error-inject.rst delete mode 100644 Documentation/fault-injection/notifier-error-inject.txt create mode 100644 Documentation/fault-injection/nvme-fault-injection.rst delete mode 100644 Documentation/fault-injection/nvme-fault-injection.txt create mode 100644 Documentation/fault-injection/provoke-crashes.rst delete mode 100644 Documentation/fault-injection/provoke-crashes.txt diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst new file mode 100644 index 000000000000..f51bb21d20e4 --- /dev/null +++ b/Documentation/fault-injection/fault-injection.rst @@ -0,0 +1,446 @@ +=========================================== +Fault injection capabilities infrastructure +=========================================== + +See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug. + + +Available fault injection capabilities +-------------------------------------- + +- failslab + + injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...) + +- fail_page_alloc + + injects page allocation failures. (alloc_pages(), get_free_pages(), ...) + +- fail_futex + + injects futex deadlock and uaddr fault errors. + +- fail_make_request + + injects disk IO errors on devices permitted by setting + /sys/block//make-it-fail or + /sys/block///make-it-fail. (generic_make_request()) + +- fail_mmc_request + + injects MMC data errors on devices permitted by setting + debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request + +- fail_function + + injects error return on specific functions, which are marked by + ALLOW_ERROR_INJECTION() macro, by setting debugfs entries + under /sys/kernel/debug/fail_function. No boot option supported. + +- NVMe fault injection + + inject NVMe status code and retry flag on devices permitted by setting + debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default + status code is NVME_SC_INVALID_OPCODE with no retry. The status code and + retry flag can be set via the debugfs. + + +Configure fault-injection capabilities behavior +----------------------------------------------- + +debugfs entries +^^^^^^^^^^^^^^^ + +fault-inject-debugfs kernel module provides some debugfs entries for runtime +configuration of fault-injection capabilities. + +- /sys/kernel/debug/fail*/probability: + + likelihood of failure injection, in percent. + + Format: + + Note that one-failure-per-hundred is a very high error rate + for some testcases. Consider setting probability=100 and configure + /sys/kernel/debug/fail*/interval for such testcases. + +- /sys/kernel/debug/fail*/interval: + + specifies the interval between failures, for calls to + should_fail() that pass all the other tests. + + Note that if you enable this, by setting interval>1, you will + probably want to set probability=100. + +- /sys/kernel/debug/fail*/times: + + specifies how many times failures may happen at most. + A value of -1 means "no limit". + +- /sys/kernel/debug/fail*/space: + + specifies an initial resource "budget", decremented by "size" + on each call to should_fail(,size). Failure injection is + suppressed until "space" reaches zero. + +- /sys/kernel/debug/fail*/verbose + + Format: { 0 | 1 | 2 } + + specifies the verbosity of the messages when failure is + injected. '0' means no messages; '1' will print only a single + log line per failure; '2' will print a call trace too -- useful + to debug the problems revealed by fault injection. + +- /sys/kernel/debug/fail*/task-filter: + + Format: { 'Y' | 'N' } + + A value of 'N' disables filtering by process (default). + Any positive value limits failures to only processes indicated by + /proc//make-it-fail==1. + +- /sys/kernel/debug/fail*/require-start, + /sys/kernel/debug/fail*/require-end, + /sys/kernel/debug/fail*/reject-start, + /sys/kernel/debug/fail*/reject-end: + + specifies the range of virtual addresses tested during + stacktrace walking. Failure is injected only if some caller + in the walked stacktrace lies within the required range, and + none lies within the rejected range. + Default required range is [0,ULONG_MAX) (whole of virtual address space). + Default rejected range is [0,0). + +- /sys/kernel/debug/fail*/stacktrace-depth: + + specifies the maximum stacktrace depth walked during search + for a caller within [require-start,require-end) OR + [reject-start,reject-end). + +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' won't inject failures into + highmem/user allocations. + +- /sys/kernel/debug/failslab/ignore-gfp-wait: +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will inject failures + only into non-sleep allocations (GFP_ATOMIC allocations). + +- /sys/kernel/debug/fail_page_alloc/min-order: + + specifies the minimum page allocation order to be injected + failures. + +- /sys/kernel/debug/fail_futex/ignore-private: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable failure injections + when dealing with private (address space) futexes. + +- /sys/kernel/debug/fail_function/inject: + + Format: { 'function-name' | '!function-name' | '' } + + specifies the target function of error injection by name. + If the function name leads '!' prefix, given function is + removed from injection list. If nothing specified ('') + injection list is cleared. + +- /sys/kernel/debug/fail_function/injectable: + + (read only) shows error injectable functions and what type of + error values can be specified. The error type will be one of + below; + - NULL: retval must be 0. + - ERRNO: retval must be -1 to -MAX_ERRNO (-4096). + - ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096). + +- /sys/kernel/debug/fail_function//retval: + + specifies the "error" return value to inject to the given + function for given function. This will be created when + user specifies new injection entry. + +Boot option +^^^^^^^^^^^ + +In order to inject faults while debugfs is not available (early boot time), +use the boot option:: + + failslab= + fail_page_alloc= + fail_make_request= + fail_futex= + mmc_core.fail_request=,,, + +proc entries +^^^^^^^^^^^^ + +- /proc//fail-nth, + /proc/self/task//fail-nth: + + Write to this file of integer N makes N-th call in the task fail. + Read from this file returns a integer value. A value of '0' indicates + that the fault setup with a previous write to this file was injected. + A positive integer N indicates that the fault wasn't yet injected. + Note that this file enables all types of faults (slab, futex, etc). + This setting takes precedence over all other generic debugfs settings + like probability, interval, times, etc. But per-capability settings + (e.g. fail_futex/ignore-private) take precedence over it. + + This feature is intended for systematic testing of faults in a single + system call. See an example below. + +How to add new fault injection capability +----------------------------------------- + +- #include + +- define the fault attributes + + DECLARE_FAULT_ATTR(name); + + Please see the definition of struct fault_attr in fault-inject.h + for details. + +- provide a way to configure fault attributes + +- boot option + + If you need to enable the fault injection capability from boot time, you can + provide boot option to configure it. There is a helper function for it: + + setup_fault_attr(attr, str); + +- debugfs entries + + failslab, fail_page_alloc, and fail_make_request use this way. + Helper functions: + + fault_create_debugfs_attr(name, parent, attr); + +- module parameters + + If the scope of the fault injection capability is limited to a + single kernel module, it is better to provide module parameters to + configure the fault attributes. + +- add a hook to insert failures + + Upon should_fail() returning true, client code should inject a failure: + + should_fail(attr, size); + +Application Examples +-------------------- + +- Inject slab allocation failures into module init/exit code:: + + #!/bin/bash + + FAILTYPE=failslab + echo Y > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + + faulty_system() + { + bash -c "echo 1 > /proc/self/make-it-fail && exec $*" + } + + if [ $# -eq 0 ] + then + echo "Usage: $0 modulename [ modulename ... ]" + exit 1 + fi + + for m in $* + do + echo inserting $m... + faulty_system modprobe $m + + echo removing $m... + faulty_system modprobe -r $m + done + +------------------------------------------------------------------------------ + +- Inject page allocation failures only for a specific module:: + + #!/bin/bash + + FAILTYPE=fail_page_alloc + module=$1 + + if [ -z $module ] + then + echo "Usage: $0 " + exit 1 + fi + + modprobe $module + + if [ ! -d /sys/module/$module/sections ] + then + echo Module $module is not loaded + exit 1 + fi + + cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start + cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end + + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem + echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth + + trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT + + echo "Injecting errors into the module $module... (interrupt to stop)" + sleep 1000000 + +------------------------------------------------------------------------------ + +- Inject open_ctree error while btrfs mount:: + + #!/bin/bash + + rm -f testfile.img + dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 + DEVICE=$(losetup --show -f testfile.img) + mkfs.btrfs -f $DEVICE + mkdir -p tmpmnt + + FAILTYPE=fail_function + FAILFUNC=open_ctree + echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject + echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 100 > /sys/kernel/debug/$FAILTYPE/probability + echo 0 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 1 > /sys/kernel/debug/$FAILTYPE/verbose + + mount -t btrfs $DEVICE tmpmnt + if [ $? -ne 0 ] + then + echo "SUCCESS!" + else + echo "FAILED!" + umount tmpmnt + fi + + echo > /sys/kernel/debug/$FAILTYPE/inject + + rmdir tmpmnt + losetup -d $DEVICE + rm testfile.img + + +Tool to run command with failslab or fail_page_alloc +---------------------------------------------------- +In order to make it easier to accomplish the tasks mentioned above, we can use +tools/testing/fault-injection/failcmd.sh. Please run a command +"./tools/testing/fault-injection/failcmd.sh --help" for more information and +see the following examples. + +Examples: + +Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab +allocation failure:: + + # ./tools/testing/fault-injection/failcmd.sh \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to specify 100 times failures at most instead of one time +at most by default:: + + # ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to inject page allocation failure instead of slab +allocation failure:: + + # env FAILCMD_TYPE=fail_page_alloc \ + ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Systematic faults using fail-nth +--------------------------------- + +The following code systematically faults 0-th, 1-st, 2-nd and so on +capabilities in the socketpair() system call:: + + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + + int main() + { + int i, err, res, fail_nth, fds[2]; + char buf[128]; + + system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait"); + sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid)); + fail_nth = open(buf, O_RDWR); + for (i = 1;; i++) { + sprintf(buf, "%d", i); + write(fail_nth, buf, strlen(buf)); + res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); + err = errno; + pread(fail_nth, buf, sizeof(buf), 0); + if (res == 0) { + close(fds[0]); + close(fds[1]); + } + printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y', + res, err); + if (atoi(buf)) + break; + } + return 0; + } + +An example output:: + + 1-th fault Y: res=-1/23 + 2-th fault Y: res=-1/23 + 3-th fault Y: res=-1/12 + 4-th fault Y: res=-1/12 + 5-th fault Y: res=-1/23 + 6-th fault Y: res=-1/23 + 7-th fault Y: res=-1/23 + 8-th fault Y: res=-1/12 + 9-th fault Y: res=-1/12 + 10-th fault Y: res=-1/12 + 11-th fault Y: res=-1/12 + 12-th fault Y: res=-1/12 + 13-th fault Y: res=-1/12 + 14-th fault Y: res=-1/12 + 15-th fault Y: res=-1/12 + 16-th fault N: res=0/12 diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt deleted file mode 100644 index a17517a083c3..000000000000 --- a/Documentation/fault-injection/fault-injection.txt +++ /dev/null @@ -1,435 +0,0 @@ -Fault injection capabilities infrastructure -=========================================== - -See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug. - - -Available fault injection capabilities --------------------------------------- - -o failslab - - injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...) - -o fail_page_alloc - - injects page allocation failures. (alloc_pages(), get_free_pages(), ...) - -o fail_futex - - injects futex deadlock and uaddr fault errors. - -o fail_make_request - - injects disk IO errors on devices permitted by setting - /sys/block//make-it-fail or - /sys/block///make-it-fail. (generic_make_request()) - -o fail_mmc_request - - injects MMC data errors on devices permitted by setting - debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request - -o fail_function - - injects error return on specific functions, which are marked by - ALLOW_ERROR_INJECTION() macro, by setting debugfs entries - under /sys/kernel/debug/fail_function. No boot option supported. - -o NVMe fault injection - - inject NVMe status code and retry flag on devices permitted by setting - debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default - status code is NVME_SC_INVALID_OPCODE with no retry. The status code and - retry flag can be set via the debugfs. - - -Configure fault-injection capabilities behavior ------------------------------------------------ - -o debugfs entries - -fault-inject-debugfs kernel module provides some debugfs entries for runtime -configuration of fault-injection capabilities. - -- /sys/kernel/debug/fail*/probability: - - likelihood of failure injection, in percent. - Format: - - Note that one-failure-per-hundred is a very high error rate - for some testcases. Consider setting probability=100 and configure - /sys/kernel/debug/fail*/interval for such testcases. - -- /sys/kernel/debug/fail*/interval: - - specifies the interval between failures, for calls to - should_fail() that pass all the other tests. - - Note that if you enable this, by setting interval>1, you will - probably want to set probability=100. - -- /sys/kernel/debug/fail*/times: - - specifies how many times failures may happen at most. - A value of -1 means "no limit". - -- /sys/kernel/debug/fail*/space: - - specifies an initial resource "budget", decremented by "size" - on each call to should_fail(,size). Failure injection is - suppressed until "space" reaches zero. - -- /sys/kernel/debug/fail*/verbose - - Format: { 0 | 1 | 2 } - specifies the verbosity of the messages when failure is - injected. '0' means no messages; '1' will print only a single - log line per failure; '2' will print a call trace too -- useful - to debug the problems revealed by fault injection. - -- /sys/kernel/debug/fail*/task-filter: - - Format: { 'Y' | 'N' } - A value of 'N' disables filtering by process (default). - Any positive value limits failures to only processes indicated by - /proc//make-it-fail==1. - -- /sys/kernel/debug/fail*/require-start: -- /sys/kernel/debug/fail*/require-end: -- /sys/kernel/debug/fail*/reject-start: -- /sys/kernel/debug/fail*/reject-end: - - specifies the range of virtual addresses tested during - stacktrace walking. Failure is injected only if some caller - in the walked stacktrace lies within the required range, and - none lies within the rejected range. - Default required range is [0,ULONG_MAX) (whole of virtual address space). - Default rejected range is [0,0). - -- /sys/kernel/debug/fail*/stacktrace-depth: - - specifies the maximum stacktrace depth walked during search - for a caller within [require-start,require-end) OR - [reject-start,reject-end). - -- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem: - - Format: { 'Y' | 'N' } - default is 'N', setting it to 'Y' won't inject failures into - highmem/user allocations. - -- /sys/kernel/debug/failslab/ignore-gfp-wait: -- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait: - - Format: { 'Y' | 'N' } - default is 'N', setting it to 'Y' will inject failures - only into non-sleep allocations (GFP_ATOMIC allocations). - -- /sys/kernel/debug/fail_page_alloc/min-order: - - specifies the minimum page allocation order to be injected - failures. - -- /sys/kernel/debug/fail_futex/ignore-private: - - Format: { 'Y' | 'N' } - default is 'N', setting it to 'Y' will disable failure injections - when dealing with private (address space) futexes. - -- /sys/kernel/debug/fail_function/inject: - - Format: { 'function-name' | '!function-name' | '' } - specifies the target function of error injection by name. - If the function name leads '!' prefix, given function is - removed from injection list. If nothing specified ('') - injection list is cleared. - -- /sys/kernel/debug/fail_function/injectable: - - (read only) shows error injectable functions and what type of - error values can be specified. The error type will be one of - below; - - NULL: retval must be 0. - - ERRNO: retval must be -1 to -MAX_ERRNO (-4096). - - ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096). - -- /sys/kernel/debug/fail_function//retval: - - specifies the "error" return value to inject to the given - function for given function. This will be created when - user specifies new injection entry. - -o Boot option - -In order to inject faults while debugfs is not available (early boot time), -use the boot option: - - failslab= - fail_page_alloc= - fail_make_request= - fail_futex= - mmc_core.fail_request=,,, - -o proc entries - -- /proc//fail-nth: -- /proc/self/task//fail-nth: - - Write to this file of integer N makes N-th call in the task fail. - Read from this file returns a integer value. A value of '0' indicates - that the fault setup with a previous write to this file was injected. - A positive integer N indicates that the fault wasn't yet injected. - Note that this file enables all types of faults (slab, futex, etc). - This setting takes precedence over all other generic debugfs settings - like probability, interval, times, etc. But per-capability settings - (e.g. fail_futex/ignore-private) take precedence over it. - - This feature is intended for systematic testing of faults in a single - system call. See an example below. - -How to add new fault injection capability ------------------------------------------ - -o #include - -o define the fault attributes - - DECLARE_FAULT_ATTR(name); - - Please see the definition of struct fault_attr in fault-inject.h - for details. - -o provide a way to configure fault attributes - -- boot option - - If you need to enable the fault injection capability from boot time, you can - provide boot option to configure it. There is a helper function for it: - - setup_fault_attr(attr, str); - -- debugfs entries - - failslab, fail_page_alloc, and fail_make_request use this way. - Helper functions: - - fault_create_debugfs_attr(name, parent, attr); - -- module parameters - - If the scope of the fault injection capability is limited to a - single kernel module, it is better to provide module parameters to - configure the fault attributes. - -o add a hook to insert failures - - Upon should_fail() returning true, client code should inject a failure. - - should_fail(attr, size); - -Application Examples --------------------- - -o Inject slab allocation failures into module init/exit code - -#!/bin/bash - -FAILTYPE=failslab -echo Y > /sys/kernel/debug/$FAILTYPE/task-filter -echo 10 > /sys/kernel/debug/$FAILTYPE/probability -echo 100 > /sys/kernel/debug/$FAILTYPE/interval -echo -1 > /sys/kernel/debug/$FAILTYPE/times -echo 0 > /sys/kernel/debug/$FAILTYPE/space -echo 2 > /sys/kernel/debug/$FAILTYPE/verbose -echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait - -faulty_system() -{ - bash -c "echo 1 > /proc/self/make-it-fail && exec $*" -} - -if [ $# -eq 0 ] -then - echo "Usage: $0 modulename [ modulename ... ]" - exit 1 -fi - -for m in $* -do - echo inserting $m... - faulty_system modprobe $m - - echo removing $m... - faulty_system modprobe -r $m -done - ------------------------------------------------------------------------------- - -o Inject page allocation failures only for a specific module - -#!/bin/bash - -FAILTYPE=fail_page_alloc -module=$1 - -if [ -z $module ] -then - echo "Usage: $0 " - exit 1 -fi - -modprobe $module - -if [ ! -d /sys/module/$module/sections ] -then - echo Module $module is not loaded - exit 1 -fi - -cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start -cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end - -echo N > /sys/kernel/debug/$FAILTYPE/task-filter -echo 10 > /sys/kernel/debug/$FAILTYPE/probability -echo 100 > /sys/kernel/debug/$FAILTYPE/interval -echo -1 > /sys/kernel/debug/$FAILTYPE/times -echo 0 > /sys/kernel/debug/$FAILTYPE/space -echo 2 > /sys/kernel/debug/$FAILTYPE/verbose -echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait -echo 1 > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem -echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth - -trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT - -echo "Injecting errors into the module $module... (interrupt to stop)" -sleep 1000000 - ------------------------------------------------------------------------------- - -o Inject open_ctree error while btrfs mount - -#!/bin/bash - -rm -f testfile.img -dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 -DEVICE=$(losetup --show -f testfile.img) -mkfs.btrfs -f $DEVICE -mkdir -p tmpmnt - -FAILTYPE=fail_function -FAILFUNC=open_ctree -echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject -echo -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval -echo N > /sys/kernel/debug/$FAILTYPE/task-filter -echo 100 > /sys/kernel/debug/$FAILTYPE/probability -echo 0 > /sys/kernel/debug/$FAILTYPE/interval -echo -1 > /sys/kernel/debug/$FAILTYPE/times -echo 0 > /sys/kernel/debug/$FAILTYPE/space -echo 1 > /sys/kernel/debug/$FAILTYPE/verbose - -mount -t btrfs $DEVICE tmpmnt -if [ $? -ne 0 ] -then - echo "SUCCESS!" -else - echo "FAILED!" - umount tmpmnt -fi - -echo > /sys/kernel/debug/$FAILTYPE/inject - -rmdir tmpmnt -losetup -d $DEVICE -rm testfile.img - - -Tool to run command with failslab or fail_page_alloc ----------------------------------------------------- -In order to make it easier to accomplish the tasks mentioned above, we can use -tools/testing/fault-injection/failcmd.sh. Please run a command -"./tools/testing/fault-injection/failcmd.sh --help" for more information and -see the following examples. - -Examples: - -Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab -allocation failure. - - # ./tools/testing/fault-injection/failcmd.sh \ - -- make -C tools/testing/selftests/ run_tests - -Same as above except to specify 100 times failures at most instead of one time -at most by default. - - # ./tools/testing/fault-injection/failcmd.sh --times=100 \ - -- make -C tools/testing/selftests/ run_tests - -Same as above except to inject page allocation failure instead of slab -allocation failure. - - # env FAILCMD_TYPE=fail_page_alloc \ - ./tools/testing/fault-injection/failcmd.sh --times=100 \ - -- make -C tools/testing/selftests/ run_tests - -Systematic faults using fail-nth ---------------------------------- - -The following code systematically faults 0-th, 1-st, 2-nd and so on -capabilities in the socketpair() system call. - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int main() -{ - int i, err, res, fail_nth, fds[2]; - char buf[128]; - - system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait"); - sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid)); - fail_nth = open(buf, O_RDWR); - for (i = 1;; i++) { - sprintf(buf, "%d", i); - write(fail_nth, buf, strlen(buf)); - res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); - err = errno; - pread(fail_nth, buf, sizeof(buf), 0); - if (res == 0) { - close(fds[0]); - close(fds[1]); - } - printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y', - res, err); - if (atoi(buf)) - break; - } - return 0; -} - -An example output: - -1-th fault Y: res=-1/23 -2-th fault Y: res=-1/23 -3-th fault Y: res=-1/12 -4-th fault Y: res=-1/12 -5-th fault Y: res=-1/23 -6-th fault Y: res=-1/23 -7-th fault Y: res=-1/23 -8-th fault Y: res=-1/12 -9-th fault Y: res=-1/12 -10-th fault Y: res=-1/12 -11-th fault Y: res=-1/12 -12-th fault Y: res=-1/12 -13-th fault Y: res=-1/12 -14-th fault Y: res=-1/12 -15-th fault Y: res=-1/12 -16-th fault N: res=0/12 diff --git a/Documentation/fault-injection/index.rst b/Documentation/fault-injection/index.rst new file mode 100644 index 000000000000..92b5639ed07a --- /dev/null +++ b/Documentation/fault-injection/index.rst @@ -0,0 +1,20 @@ +:orphan: + +=============== +fault-injection +=============== + +.. toctree:: + :maxdepth: 1 + + fault-injection + notifier-error-inject + nvme-fault-injection + provoke-crashes + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/fault-injection/notifier-error-inject.rst b/Documentation/fault-injection/notifier-error-inject.rst new file mode 100644 index 000000000000..1668b6e48d3a --- /dev/null +++ b/Documentation/fault-injection/notifier-error-inject.rst @@ -0,0 +1,98 @@ +Notifier error injection +======================== + +Notifier error injection provides the ability to inject artificial errors to +specified notifier chain callbacks. It is useful to test the error handling of +notifier call chain failures which is rarely executed. There are kernel +modules that can be used to test the following notifiers. + + * PM notifier + * Memory hotplug notifier + * powerpc pSeries reconfig notifier + * Netdevice notifier + +PM notifier error injection module +---------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/pm/actions//error + +Possible PM notifier events to be failed are: + + * PM_HIBERNATION_PREPARE + * PM_SUSPEND_PREPARE + * PM_RESTORE_PREPARE + +Example: Inject PM suspend error (-12 = -ENOMEM):: + + # cd /sys/kernel/debug/notifier-error-inject/pm/ + # echo -12 > actions/PM_SUSPEND_PREPARE/error + # echo mem > /sys/power/state + bash: echo: write error: Cannot allocate memory + +Memory hotplug notifier error injection module +---------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/memory/actions//error + +Possible memory notifier events to be failed are: + + * MEM_GOING_ONLINE + * MEM_GOING_OFFLINE + +Example: Inject memory hotplug offline error (-12 == -ENOMEM):: + + # cd /sys/kernel/debug/notifier-error-inject/memory + # echo -12 > actions/MEM_GOING_OFFLINE/error + # echo offline > /sys/devices/system/memory/memoryXXX/state + bash: echo: write error: Cannot allocate memory + +powerpc pSeries reconfig notifier error injection module +-------------------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions//error + +Possible pSeries reconfig notifier events to be failed are: + + * PSERIES_RECONFIG_ADD + * PSERIES_RECONFIG_REMOVE + * PSERIES_DRCONF_MEM_ADD + * PSERIES_DRCONF_MEM_REMOVE + +Netdevice notifier error injection module +---------------------------------------------- +This feature is controlled through debugfs interface + + /sys/kernel/debug/notifier-error-inject/netdev/actions//error + +Netdevice notifier events which can be failed are: + + * NETDEV_REGISTER + * NETDEV_CHANGEMTU + * NETDEV_CHANGENAME + * NETDEV_PRE_UP + * NETDEV_PRE_TYPE_CHANGE + * NETDEV_POST_INIT + * NETDEV_PRECHANGEMTU + * NETDEV_PRECHANGEUPPER + * NETDEV_CHANGEUPPER + +Example: Inject netdevice mtu change error (-22 == -EINVAL):: + + # cd /sys/kernel/debug/notifier-error-inject/netdev + # echo -22 > actions/NETDEV_CHANGEMTU/error + # ip link set eth0 mtu 1024 + RTNETLINK answers: Invalid argument + +For more usage examples +----------------------- +There are tools/testing/selftests using the notifier error injection features +for CPU and memory notifiers. + + * tools/testing/selftests/cpu-hotplug/on-off-test.sh + * tools/testing/selftests/memory-hotplug/on-off-test.sh + +These scripts first do simple online and offline tests and then do fault +injection tests if notifier error injection module is available. diff --git a/Documentation/fault-injection/notifier-error-inject.txt b/Documentation/fault-injection/notifier-error-inject.txt deleted file mode 100644 index e861d761de24..000000000000 --- a/Documentation/fault-injection/notifier-error-inject.txt +++ /dev/null @@ -1,94 +0,0 @@ -Notifier error injection -======================== - -Notifier error injection provides the ability to inject artificial errors to -specified notifier chain callbacks. It is useful to test the error handling of -notifier call chain failures which is rarely executed. There are kernel -modules that can be used to test the following notifiers. - - * PM notifier - * Memory hotplug notifier - * powerpc pSeries reconfig notifier - * Netdevice notifier - -PM notifier error injection module ----------------------------------- -This feature is controlled through debugfs interface -/sys/kernel/debug/notifier-error-inject/pm/actions//error - -Possible PM notifier events to be failed are: - - * PM_HIBERNATION_PREPARE - * PM_SUSPEND_PREPARE - * PM_RESTORE_PREPARE - -Example: Inject PM suspend error (-12 = -ENOMEM) - - # cd /sys/kernel/debug/notifier-error-inject/pm/ - # echo -12 > actions/PM_SUSPEND_PREPARE/error - # echo mem > /sys/power/state - bash: echo: write error: Cannot allocate memory - -Memory hotplug notifier error injection module ----------------------------------------------- -This feature is controlled through debugfs interface -/sys/kernel/debug/notifier-error-inject/memory/actions//error - -Possible memory notifier events to be failed are: - - * MEM_GOING_ONLINE - * MEM_GOING_OFFLINE - -Example: Inject memory hotplug offline error (-12 == -ENOMEM) - - # cd /sys/kernel/debug/notifier-error-inject/memory - # echo -12 > actions/MEM_GOING_OFFLINE/error - # echo offline > /sys/devices/system/memory/memoryXXX/state - bash: echo: write error: Cannot allocate memory - -powerpc pSeries reconfig notifier error injection module --------------------------------------------------------- -This feature is controlled through debugfs interface -/sys/kernel/debug/notifier-error-inject/pSeries-reconfig/actions//error - -Possible pSeries reconfig notifier events to be failed are: - - * PSERIES_RECONFIG_ADD - * PSERIES_RECONFIG_REMOVE - * PSERIES_DRCONF_MEM_ADD - * PSERIES_DRCONF_MEM_REMOVE - -Netdevice notifier error injection module ----------------------------------------------- -This feature is controlled through debugfs interface -/sys/kernel/debug/notifier-error-inject/netdev/actions//error - -Netdevice notifier events which can be failed are: - - * NETDEV_REGISTER - * NETDEV_CHANGEMTU - * NETDEV_CHANGENAME - * NETDEV_PRE_UP - * NETDEV_PRE_TYPE_CHANGE - * NETDEV_POST_INIT - * NETDEV_PRECHANGEMTU - * NETDEV_PRECHANGEUPPER - * NETDEV_CHANGEUPPER - -Example: Inject netdevice mtu change error (-22 == -EINVAL) - - # cd /sys/kernel/debug/notifier-error-inject/netdev - # echo -22 > actions/NETDEV_CHANGEMTU/error - # ip link set eth0 mtu 1024 - RTNETLINK answers: Invalid argument - -For more usage examples ------------------------ -There are tools/testing/selftests using the notifier error injection features -for CPU and memory notifiers. - - * tools/testing/selftests/cpu-hotplug/on-off-test.sh - * tools/testing/selftests/memory-hotplug/on-off-test.sh - -These scripts first do simple online and offline tests and then do fault -injection tests if notifier error injection module is available. diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst new file mode 100644 index 000000000000..bbb1bf3e8650 --- /dev/null +++ b/Documentation/fault-injection/nvme-fault-injection.rst @@ -0,0 +1,120 @@ +NVMe Fault Injection +==================== +Linux's fault injection framework provides a systematic way to support +error injection via debugfs in the /sys/kernel/debug directory. When +enabled, the default NVME_SC_INVALID_OPCODE with no retry will be +injected into the nvme_end_request. Users can change the default status +code and no retry flag via the debugfs. The list of Generic Command +Status can be found in include/linux/nvme.h + +Following examples show how to inject an error into the nvme. + +First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config, +recompile the kernel. After booting up the kernel, do the +following. + +Example 1: Inject default status code with no retry +--------------------------------------------------- + +:: + + mount /dev/nvme0n1 /mnt + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times + echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability + cp a.file /mnt + +Expected Result:: + + cp: cannot stat ‘/mnt/a.file’: Input/output error + +Message from dmesg:: + + FAULT_INJECTION: forcing a failure. + name fault_inject, interval 1, probability 100, space 0, times 1 + CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2 + Hardware name: innotek GmbH VirtualBox/VirtualBox, + BIOS VirtualBox 12/01/2006 + Call Trace: + + dump_stack+0x5c/0x7d + should_fail+0x148/0x170 + nvme_should_fail+0x2f/0x50 [nvme_core] + nvme_process_cq+0xe7/0x1d0 [nvme] + nvme_irq+0x1e/0x40 [nvme] + __handle_irq_event_percpu+0x3a/0x190 + handle_irq_event_percpu+0x30/0x70 + handle_irq_event+0x36/0x60 + handle_fasteoi_irq+0x78/0x120 + handle_irq+0xa7/0x130 + ? tick_irq_enter+0xa8/0xc0 + do_IRQ+0x43/0xc0 + common_interrupt+0xa2/0xa2 + + RIP: 0010:native_safe_halt+0x2/0x10 + RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd + RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000 + RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 + RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000 + R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480 + R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000 + ? __sched_text_end+0x4/0x4 + default_idle+0x18/0xf0 + do_idle+0x150/0x1d0 + cpu_startup_entry+0x6f/0x80 + start_kernel+0x4c4/0x4e4 + ? set_init_arg+0x55/0x55 + secondary_startup_64+0xa5/0xb0 + print_req_error: I/O error, dev nvme0n1, sector 9240 + EXT4-fs error (device nvme0n1): ext4_find_entry:1436: + inode #2: comm cp: reading directory lblock 0 + +Example 2: Inject default status code with retry +------------------------------------------------ + +:: + + mount /dev/nvme0n1 /mnt + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times + echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability + echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status + echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry + + cp a.file /mnt + +Expected Result:: + + command success without error + +Message from dmesg:: + + FAULT_INJECTION: forcing a failure. + name fault_inject, interval 1, probability 100, space 0, times 1 + CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4 + Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 + Call Trace: + + dump_stack+0x5c/0x7d + should_fail+0x148/0x170 + nvme_should_fail+0x30/0x60 [nvme_core] + nvme_loop_queue_response+0x84/0x110 [nvme_loop] + nvmet_req_complete+0x11/0x40 [nvmet] + nvmet_bio_done+0x28/0x40 [nvmet] + blk_update_request+0xb0/0x310 + blk_mq_end_request+0x18/0x60 + flush_smp_call_function_queue+0x3d/0xf0 + smp_call_function_single_interrupt+0x2c/0xc0 + call_function_single_interrupt+0xa2/0xb0 + + RIP: 0010:native_safe_halt+0x2/0x10 + RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04 + RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000 + RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 + RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000 + R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680 + R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000 + ? __sched_text_end+0x4/0x4 + default_idle+0x18/0xf0 + do_idle+0x150/0x1d0 + cpu_startup_entry+0x6f/0x80 + start_secondary+0x187/0x1e0 + secondary_startup_64+0xa5/0xb0 diff --git a/Documentation/fault-injection/nvme-fault-injection.txt b/Documentation/fault-injection/nvme-fault-injection.txt deleted file mode 100644 index 8fbf3bf60b62..000000000000 --- a/Documentation/fault-injection/nvme-fault-injection.txt +++ /dev/null @@ -1,116 +0,0 @@ -NVMe Fault Injection -==================== -Linux's fault injection framework provides a systematic way to support -error injection via debugfs in the /sys/kernel/debug directory. When -enabled, the default NVME_SC_INVALID_OPCODE with no retry will be -injected into the nvme_end_request. Users can change the default status -code and no retry flag via the debugfs. The list of Generic Command -Status can be found in include/linux/nvme.h - -Following examples show how to inject an error into the nvme. - -First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config, -recompile the kernel. After booting up the kernel, do the -following. - -Example 1: Inject default status code with no retry ---------------------------------------------------- - -mount /dev/nvme0n1 /mnt -echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times -echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability -cp a.file /mnt - -Expected Result: - -cp: cannot stat ‘/mnt/a.file’: Input/output error - -Message from dmesg: - -FAULT_INJECTION: forcing a failure. -name fault_inject, interval 1, probability 100, space 0, times 1 -CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2 -Hardware name: innotek GmbH VirtualBox/VirtualBox, -BIOS VirtualBox 12/01/2006 -Call Trace: - - dump_stack+0x5c/0x7d - should_fail+0x148/0x170 - nvme_should_fail+0x2f/0x50 [nvme_core] - nvme_process_cq+0xe7/0x1d0 [nvme] - nvme_irq+0x1e/0x40 [nvme] - __handle_irq_event_percpu+0x3a/0x190 - handle_irq_event_percpu+0x30/0x70 - handle_irq_event+0x36/0x60 - handle_fasteoi_irq+0x78/0x120 - handle_irq+0xa7/0x130 - ? tick_irq_enter+0xa8/0xc0 - do_IRQ+0x43/0xc0 - common_interrupt+0xa2/0xa2 - -RIP: 0010:native_safe_halt+0x2/0x10 -RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd -RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000 -RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 -RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000 -R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480 -R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000 - ? __sched_text_end+0x4/0x4 - default_idle+0x18/0xf0 - do_idle+0x150/0x1d0 - cpu_startup_entry+0x6f/0x80 - start_kernel+0x4c4/0x4e4 - ? set_init_arg+0x55/0x55 - secondary_startup_64+0xa5/0xb0 - print_req_error: I/O error, dev nvme0n1, sector 9240 -EXT4-fs error (device nvme0n1): ext4_find_entry:1436: -inode #2: comm cp: reading directory lblock 0 - -Example 2: Inject default status code with retry ------------------------------------------------- - -mount /dev/nvme0n1 /mnt -echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times -echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability -echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status -echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry - -cp a.file /mnt - -Expected Result: - -command success without error - -Message from dmesg: - -FAULT_INJECTION: forcing a failure. -name fault_inject, interval 1, probability 100, space 0, times 1 -CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4 -Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 -Call Trace: - - dump_stack+0x5c/0x7d - should_fail+0x148/0x170 - nvme_should_fail+0x30/0x60 [nvme_core] - nvme_loop_queue_response+0x84/0x110 [nvme_loop] - nvmet_req_complete+0x11/0x40 [nvmet] - nvmet_bio_done+0x28/0x40 [nvmet] - blk_update_request+0xb0/0x310 - blk_mq_end_request+0x18/0x60 - flush_smp_call_function_queue+0x3d/0xf0 - smp_call_function_single_interrupt+0x2c/0xc0 - call_function_single_interrupt+0xa2/0xb0 - -RIP: 0010:native_safe_halt+0x2/0x10 -RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04 -RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000 -RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 -RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000 -R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680 -R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000 - ? __sched_text_end+0x4/0x4 - default_idle+0x18/0xf0 - do_idle+0x150/0x1d0 - cpu_startup_entry+0x6f/0x80 - start_secondary+0x187/0x1e0 - secondary_startup_64+0xa5/0xb0 diff --git a/Documentation/fault-injection/provoke-crashes.rst b/Documentation/fault-injection/provoke-crashes.rst new file mode 100644 index 000000000000..9279a3e12278 --- /dev/null +++ b/Documentation/fault-injection/provoke-crashes.rst @@ -0,0 +1,48 @@ +=============== +Provoke crashes +=============== + +The lkdtm module provides an interface to crash or injure the kernel at +predefined crashpoints to evaluate the reliability of crash dumps obtained +using different dumping solutions. The module uses KPROBEs to instrument +crashing points, but can also crash the kernel directly without KRPOBE +support. + + +You can provide the way either through module arguments when inserting +the module, or through a debugfs interface. + +Usage:: + + insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<> + [cpoint_count={>0}] + +recur_count + Recursion level for the stack overflow test. Default is 10. + +cpoint_name + Crash point where the kernel is to be crashed. It can be + one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY, + FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD, + IDE_CORE_CP, DIRECT + +cpoint_type + Indicates the action to be taken on hitting the crash point. + It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW, + CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION, + WRITE_AFTER_FREE, + +cpoint_count + Indicates the number of times the crash point is to be hit + to trigger an action. The default is 10. + +You can also induce failures by mounting debugfs and writing the type to +/provoke-crash/. E.g.:: + + mount -t debugfs debugfs /mnt + echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY + + +A special file is `DIRECT` which will induce the crash directly without +KPROBE instrumentation. This mode is the only one available when the module +is built on a kernel without KPROBEs support. diff --git a/Documentation/fault-injection/provoke-crashes.txt b/Documentation/fault-injection/provoke-crashes.txt deleted file mode 100644 index 7a9d3d81525b..000000000000 --- a/Documentation/fault-injection/provoke-crashes.txt +++ /dev/null @@ -1,38 +0,0 @@ -The lkdtm module provides an interface to crash or injure the kernel at -predefined crashpoints to evaluate the reliability of crash dumps obtained -using different dumping solutions. The module uses KPROBEs to instrument -crashing points, but can also crash the kernel directly without KRPOBE -support. - - -You can provide the way either through module arguments when inserting -the module, or through a debugfs interface. - -Usage: insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<> - [cpoint_count={>0}] - - recur_count : Recursion level for the stack overflow test. Default is 10. - - cpoint_name : Crash point where the kernel is to be crashed. It can be - one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY, - FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD, - IDE_CORE_CP, DIRECT - - cpoint_type : Indicates the action to be taken on hitting the crash point. - It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW, - CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION, - WRITE_AFTER_FREE, - - cpoint_count : Indicates the number of times the crash point is to be hit - to trigger an action. The default is 10. - -You can also induce failures by mounting debugfs and writing the type to -/provoke-crash/. E.g., - - mount -t debugfs debugfs /mnt - echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY - - -A special file is `DIRECT' which will induce the crash directly without -KPROBE instrumentation. This mode is the only one available when the module -is built on a kernel without KPROBEs support. diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst index 4b7a5ab3cec1..13dd893c9f88 100644 --- a/Documentation/process/4.Coding.rst +++ b/Documentation/process/4.Coding.rst @@ -298,7 +298,7 @@ enabled, a configurable percentage of memory allocations will be made to fail; these failures can be restricted to a specific range of code. Running with fault injection enabled allows the programmer to see how the code responds when things go badly. See -Documentation/fault-injection/fault-injection.txt for more information on +Documentation/fault-injection/fault-injection.rst for more information on how to use this facility. Other kinds of errors can be found with the "sparse" static analysis tool. diff --git a/Documentation/translations/it_IT/process/4.Coding.rst b/Documentation/translations/it_IT/process/4.Coding.rst index c05b89e616dd..a5e36aa60448 100644 --- a/Documentation/translations/it_IT/process/4.Coding.rst +++ b/Documentation/translations/it_IT/process/4.Coding.rst @@ -314,7 +314,7 @@ di allocazione di memoria sarà destinata al fallimento; questi fallimenti possono essere ridotti ad uno specifico pezzo di codice. Procedere con l'inserimento dei fallimenti attivo permette al programmatore di verificare come il codice risponde quando le cose vanno male. Consultate: -Documentation/fault-injection/fault-injection.txt per avere maggiori +Documentation/fault-injection/fault-injection.rst per avere maggiori informazioni su come utilizzare questo strumento. Altre tipologie di errori possono essere riscontrati con lo strumento di diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst index 8bb777941394..b82b1dde3122 100644 --- a/Documentation/translations/zh_CN/process/4.Coding.rst +++ b/Documentation/translations/zh_CN/process/4.Coding.rst @@ -205,7 +205,7 @@ Linus对这个问题给出了最佳答案: 启用故障注入后，内存分配的可配置百分比将失败；这些失败可以限制在特定的代码 范围内。在启用了故障注入的情况下运行，程序员可以看到当情况恶化时代码如何响 应。有关如何使用此工具的详细信息，请参阅 -Documentation/fault-injection/fault-injection.txt。 +Documentation/fault-injection/fault-injection.rst。 使用“sparse”静态分析工具可以发现其他类型的错误。对于sparse，可以警告程序员 用户空间和内核空间地址之间的混淆、big endian和small endian数量的混合、在需 diff --git a/drivers/misc/lkdtm/core.c b/drivers/misc/lkdtm/core.c index 8a1428d4f138..bba49abb6750 100644 --- a/drivers/misc/lkdtm/core.c +++ b/drivers/misc/lkdtm/core.c @@ -15,7 +15,7 @@ * * Debugfs support added by Simon Kagstrom * - * See Documentation/fault-injection/provoke-crashes.txt for instructions + * See Documentation/fault-injection/provoke-crashes.rst for instructions */ #include "lkdtm.h" #include diff --git a/include/linux/fault-inject.h b/include/linux/fault-inject.h index 7e6c77740413..e525f6957c49 100644 --- a/include/linux/fault-inject.h +++ b/include/linux/fault-inject.h @@ -11,7 +11,7 @@ /* * For explanation of the elements of this struct, see - * Documentation/fault-injection/fault-injection.txt + * Documentation/fault-injection/fault-injection.rst */ struct fault_attr { unsigned long probability; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index cbdfae379896..4d42a9a6006d 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1701,7 +1701,7 @@ config LKDTM called lkdtm. Documentation on how to use the module can be found in - Documentation/fault-injection/provoke-crashes.txt + Documentation/fault-injection/provoke-crashes.rst config TEST_LIST_SORT tristate "Linked list sorting test" diff --git a/tools/testing/fault-injection/failcmd.sh b/tools/testing/fault-injection/failcmd.sh index 29a6c63c5a15..78dac34264be 100644 --- a/tools/testing/fault-injection/failcmd.sh +++ b/tools/testing/fault-injection/failcmd.sh @@ -42,7 +42,7 @@ OPTIONS --interval=value, --space=value, --verbose=value, --task-filter=value, --stacktrace-depth=value, --require-start=value, --require-end=value, --reject-start=value, --reject-end=value, --ignore-gfp-wait=value - See Documentation/fault-injection/fault-injection.txt for more + See Documentation/fault-injection/fault-injection.rst for more information failslab options: -- cgit v1.2.3-59-g8ed1b