From 145b0a5d18565615724045dbc2ada32324faa395 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Mon, 28 Jul 2014 13:44:00 +0100 Subject: iio: adc: exynos_adc: Add support for s3c24xx ADC This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx is alomost same as ADCv1. But, There are a little difference as following: - ADCMUX register address - ADCDAT mask (10 bit or 12 bit ADC resolution according to SoC version) - s3c24xx/s3c64xx has not included ADC_PHY enable register Signed-off-by: Chanwoo Choi Acked-by: Arnd Bergmann Signed-off-by: Jonathan Cameron --- .../devicetree/bindings/arm/samsung/exynos-adc.txt | 16 ++- drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/exynos_adc.c | 109 +++++++++++++++++++-- 3 files changed, 114 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index d3dad46c97dd..709efaa30841 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -11,15 +11,25 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 controllers. + for exynos4412/5250 and s5pv210 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. + Must be "samsung,s3c2410-adc" for + the ADC in s3c2410 and compatibles + Must be "samsung,s3c2416-adc" for + the ADC in s3c2416 and compatibles + Must be "samsung,s3c2440-adc" for + the ADC in s3c2440 and compatibles + Must be "samsung,s3c2443-adc" for + the ADC in s3c2443 and compatibles Must be "samsung,s3c6410-adc" for the ADC in s3c6410 and compatibles -- reg: Contains ADC register address range (base address and - length) and the address of the phy enable register. +- reg: List of ADC register address range + - The base address and range of ADC register + - The base address and range of ADC_PHY register (every + SoC except for s3c24xx/s3c64xx ADC) - interrupts: Contains the interrupt information for the timer. The format is being dependent on which interrupt controller the Samsung device uses. diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 6655fd41acd9..88bdc8f612e2 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -129,7 +129,7 @@ config AT91_ADC config EXYNOS_ADC tristate "Exynos ADC driver support" - depends on ARCH_EXYNOS || (OF && COMPILE_TEST) + depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) help Core support for the ADC block found in the Samsung EXYNOS series of SoCs for drivers such as the touchscreen and hwmon to use to share diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index 62631a778b1f..c59012d2d06f 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -47,6 +47,9 @@ #define ADC_V1_INTCLR(x) ((x) + 0x18) #define ADC_V1_MUX(x) ((x) + 0x1c) +/* S3C2410 ADC registers definitions */ +#define ADC_S3C2410_MUX(x) ((x) + 0x18) + /* Future ADC_V2 registers definitions */ #define ADC_V2_CON1(x) ((x) + 0x00) #define ADC_V2_CON2(x) ((x) + 0x04) @@ -63,6 +66,8 @@ /* Bit definitions for S3C2410 ADC */ #define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3) +#define ADC_S3C2410_DATX_MASK 0x3FF +#define ADC_S3C2416_CON_RES_SEL (1u << 3) /* Bit definitions for ADC_V2 */ #define ADC_V2_CON1_SOFT_RESET (1u << 2) @@ -80,6 +85,7 @@ /* Bit definitions common for ADC_V1 and ADC_V2 */ #define ADC_CON_EN_START (1u << 0) +#define ADC_CON_EN_START_MASK (0x3 << 0) #define ADC_DATX_MASK 0xFFF #define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) @@ -103,6 +109,8 @@ struct exynos_adc { struct exynos_adc_data { int num_channels; bool needs_sclk; + bool needs_adc_phy; + u32 mask; void (*init_hw)(struct exynos_adc *info); void (*exit_hw)(struct exynos_adc *info); @@ -174,7 +182,8 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info) { u32 con1; - writel(1, info->enable_reg); + if (info->data->needs_adc_phy) + writel(1, info->enable_reg); /* set default prescaler values and Enable prescaler */ con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; @@ -188,7 +197,8 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info) { u32 con; - writel(0, info->enable_reg); + if (info->data->needs_adc_phy) + writel(0, info->enable_reg); con = readl(ADC_V1_CON(info->regs)); con |= ADC_V1_CON_STANDBY; @@ -213,6 +223,8 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info, static const struct exynos_adc_data exynos_adc_v1_data = { .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, @@ -220,6 +232,53 @@ static const struct exynos_adc_data exynos_adc_v1_data = { .start_conv = exynos_adc_v1_start_conv, }; +static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + /* Enable 12 bit ADC resolution */ + con1 = readl(ADC_V1_CON(info->regs)); + con1 |= ADC_S3C2416_CON_RES_SEL; + writel(con1, ADC_V1_CON(info->regs)); + + /* Select channel for S3C2416 */ + writel(addr, ADC_S3C2410_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +static struct exynos_adc_data const exynos_adc_s3c2416_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c2416_start_conv, +}; + +static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info, + unsigned long addr) +{ + u32 con1; + + /* Select channel for S3C2433 */ + writel(addr, ADC_S3C2410_MUX(info->regs)); + + con1 = readl(ADC_V1_CON(info->regs)); + writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); +} + +static struct exynos_adc_data const exynos_adc_s3c2443_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c2443_start_conv, +}; + static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, unsigned long addr) { @@ -231,8 +290,18 @@ static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info, writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs)); } +static struct exynos_adc_data const exynos_adc_s3c24xx_data = { + .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */ + + .init_hw = exynos_adc_v1_init_hw, + .exit_hw = exynos_adc_v1_exit_hw, + .start_conv = exynos_adc_s3c64xx_start_conv, +}; + static struct exynos_adc_data const exynos_adc_s3c64xx_data = { .num_channels = MAX_ADC_V1_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .init_hw = exynos_adc_v1_init_hw, .exit_hw = exynos_adc_v1_exit_hw, @@ -244,7 +313,8 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info) { u32 con1, con2; - writel(1, info->enable_reg); + if (info->data->needs_adc_phy) + writel(1, info->enable_reg); con1 = ADC_V2_CON1_SOFT_RESET; writel(con1, ADC_V2_CON1(info->regs)); @@ -261,7 +331,8 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info) { u32 con; - writel(0, info->enable_reg); + if (info->data->needs_adc_phy) + writel(0, info->enable_reg); con = readl(ADC_V2_CON1(info->regs)); con &= ~ADC_CON_EN_START; @@ -289,6 +360,8 @@ static void exynos_adc_v2_start_conv(struct exynos_adc *info, static const struct exynos_adc_data exynos_adc_v2_data = { .num_channels = MAX_ADC_V2_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ + .needs_adc_phy = true, .init_hw = exynos_adc_v2_init_hw, .exit_hw = exynos_adc_v2_exit_hw, @@ -298,7 +371,9 @@ static const struct exynos_adc_data exynos_adc_v2_data = { static const struct exynos_adc_data exynos3250_adc_data = { .num_channels = MAX_EXYNOS3250_ADC_CHANNELS, + .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */ .needs_sclk = true, + .needs_adc_phy = true, .init_hw = exynos_adc_v2_init_hw, .exit_hw = exynos_adc_v2_exit_hw, @@ -308,6 +383,18 @@ static const struct exynos_adc_data exynos3250_adc_data = { static const struct of_device_id exynos_adc_match[] = { { + .compatible = "samsung,s3c2410-adc", + .data = &exynos_adc_s3c24xx_data, + }, { + .compatible = "samsung,s3c2416-adc", + .data = &exynos_adc_s3c2416_data, + }, { + .compatible = "samsung,s3c2440-adc", + .data = &exynos_adc_s3c24xx_data, + }, { + .compatible = "samsung,s3c2443-adc", + .data = &exynos_adc_s3c2443_data, + }, { .compatible = "samsung,s3c6410-adc", .data = &exynos_adc_s3c64xx_data, }, { @@ -373,9 +460,10 @@ static int exynos_read_raw(struct iio_dev *indio_dev, static irqreturn_t exynos_adc_isr(int irq, void *dev_id) { struct exynos_adc *info = (struct exynos_adc *)dev_id; + u32 mask = info->data->mask; /* Read value */ - info->value = readl(ADC_V1_DATX(info->regs)) & ADC_DATX_MASK; + info->value = readl(ADC_V1_DATX(info->regs)) & mask; /* clear irq */ if (info->data->clear_irq) @@ -468,10 +556,13 @@ static int exynos_adc_probe(struct platform_device *pdev) if (IS_ERR(info->regs)) return PTR_ERR(info->regs); - mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - info->enable_reg = devm_ioremap_resource(&pdev->dev, mem); - if (IS_ERR(info->enable_reg)) - return PTR_ERR(info->enable_reg); + + if (info->data->needs_adc_phy) { + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + info->enable_reg = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(info->enable_reg)) + return PTR_ERR(info->enable_reg); + } irq = platform_get_irq(pdev, 0); if (irq < 0) { -- cgit v1.2.3-59-g8ed1b