From 210c4f70b4c630b27f0840c8043c138c955edc9e Mon Sep 17 00:00:00 2001 From: hayeswang Date: Mon, 20 Mar 2017 16:13:44 +0800 Subject: r8152: set the RMS of RTL8153 according to the mtu Set the received maximum size (RMS) according to the mtu size. It is unnecessary to receive a packet which is more than the size we could transmit. Besides, this could let the rx buffer be used effectively. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index bb3eedd07fbe..525c25817013 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2899,7 +2899,8 @@ static void r8153_first_init(struct r8152 *tp) rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS); + ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); @@ -2951,7 +2952,8 @@ static void r8153_enter_oob(struct r8152 *tp) usleep_range(1000, 2000); } - ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS); + ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); ocp_data &= ~TEREDO_WAKE_MASK; @@ -4201,8 +4203,14 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu) dev->mtu = new_mtu; - if (netif_running(dev) && netif_carrier_ok(dev)) - r8153_set_rx_early_size(tp); + if (netif_running(dev)) { + u32 rms = new_mtu + VLAN_ETH_HLEN + CRC_SIZE; + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms); + + if (netif_carrier_ok(dev)) + r8153_set_rx_early_size(tp); + } mutex_unlock(&tp->control); -- cgit v1.2.3-59-g8ed1b