From 8422d1110ad445afd2083547181ff1be3a56f165 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:02 +0100 Subject: riscv: dts: microchip: remove icicle memory clocks The clock properties in the icicle kit's memory entries cause dtbs_check errors: arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: /: memory@80000000: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' Get rid of the clocks to avoid the errors. Reported-by: Palmer Dabbelt Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board") Fixes: 5b28df37d311 ("riscv: dts: microchip: update peripherals in icicle kit device tree") Reviewed-by: Heiko Stuebner Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-2-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts index 3392153dd0f1..c71d6aa6137a 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts @@ -32,14 +32,12 @@ ddrc_cache_lo: memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x2e000000>; - clocks = <&clkcfg CLK_DDRC>; status = "okay"; }; ddrc_cache_hi: memory@1000000000 { device_type = "memory"; reg = <0x10 0x0 0x0 0x40000000>; - clocks = <&clkcfg CLK_DDRC>; status = "okay"; }; }; -- cgit v1.3-18-gd494 From 9499e76de5d5ab46b246764f41090074f1c68cfe Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:03 +0100 Subject: riscv: dts: microchip: move sysctrlr out of soc bus The MPFS system controller has no registers of its own, so move it out of the soc node to avoid dtbs_check warnings: arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dtb: soc: syscontroller: {'compatible': ['microchip,mpfs-sys-controller'], 'mboxes': [[15, 0]], 'status': ['okay']} should not be valid under {'type': 'object'} Reported-by: Palmer Dabbelt Suggested-by: Rob Herring Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree") Reviewed-by: Heiko Stuebner Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-3-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index cf2f55e1dcb6..e318fe57accd 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -146,6 +146,11 @@ #clock-cells = <0>; }; + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -446,10 +451,5 @@ #mbox-cells = <1>; status = "disabled"; }; - - syscontroller: syscontroller { - compatible = "microchip,mpfs-sys-controller"; - mboxes = <&mbox 0>; - }; }; }; -- cgit v1.3-18-gd494 From da305fa8a9a6c44a0216d7ed30b2f8e91b6aa245 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:04 +0100 Subject: riscv: dts: microchip: remove soc vendor from filenames Having the SoC vendor both as the directory and in the filename adds little. Remove microchip from the filenames so that the files will resemble the other directories in riscv (and arm64). The new names follow a soc-board.dts & soc{,-fabric}.dtsi pattern. Reviewed-by: Heiko Stuebner Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-4-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/Makefile | 2 +- .../boot/dts/microchip/microchip-mpfs-fabric.dtsi | 37 -- .../dts/microchip/microchip-mpfs-icicle-kit.dts | 159 ------- arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 455 --------------------- arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi | 37 ++ arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 159 +++++++ arch/riscv/boot/dts/microchip/mpfs.dtsi | 455 +++++++++++++++++++++ 7 files changed, 652 insertions(+), 652 deletions(-) delete mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi delete mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts delete mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts create mode 100644 arch/riscv/boot/dts/microchip/mpfs.dtsi diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index 855c1502d912..af3a5059b350 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi deleted file mode 100644 index ccaac3371cf9..000000000000 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/ { - core_pwm0: pwm@41000000 { - compatible = "microchip,corepwm-rtl-v4"; - reg = <0x0 0x41000000 0x0 0xF0>; - microchip,sync-update-mask = /bits/ 32 <0>; - #pwm-cells = <2>; - clocks = <&fabric_clk3>; - status = "disabled"; - }; - - i2c2: i2c@44000000 { - compatible = "microchip,corei2c-rtl-v7"; - reg = <0x0 0x44000000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&fabric_clk3>; - interrupt-parent = <&plic>; - interrupts = <122>; - clock-frequency = <100000>; - status = "disabled"; - }; - - fabric_clk3: fabric-clk3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <62500000>; - }; - - fabric_clk1: fabric-clk1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; -}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts deleted file mode 100644 index c71d6aa6137a..000000000000 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/dts-v1/; - -#include "microchip-mpfs.dtsi" - -/* Clock frequency (in Hz) of the rtcclk */ -#define RTCCLK_FREQ 1000000 - -/ { - model = "Microchip PolarFire-SoC Icicle Kit"; - compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; - - aliases { - ethernet0 = &mac1; - serial0 = &mmuart0; - serial1 = &mmuart1; - serial2 = &mmuart2; - serial3 = &mmuart3; - serial4 = &mmuart4; - }; - - chosen { - stdout-path = "serial1:115200n8"; - }; - - cpus { - timebase-frequency = ; - }; - - ddrc_cache_lo: memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x2e000000>; - status = "okay"; - }; - - ddrc_cache_hi: memory@1000000000 { - device_type = "memory"; - reg = <0x10 0x0 0x0 0x40000000>; - status = "okay"; - }; -}; - -&refclk { - clock-frequency = <125000000>; -}; - -&mmuart1 { - status = "okay"; -}; - -&mmuart2 { - status = "okay"; -}; - -&mmuart3 { - status = "okay"; -}; - -&mmuart4 { - status = "okay"; -}; - -&mmc { - status = "okay"; - - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-mmc-highspeed; - card-detect-delay = <200>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; - -&spi0 { - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&qspi { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&mac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&mac1 { - status = "okay"; - phy-mode = "sgmii"; - phy-handle = <&phy1>; - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x1>; - }; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x1>; - }; -}; - -&gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&mbox { - status = "okay"; -}; - -&syscontroller { - status = "okay"; -}; - -&pcie { - status = "okay"; -}; - -&core_pwm0 { - status = "okay"; -}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi deleted file mode 100644 index e318fe57accd..000000000000 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ /dev/null @@ -1,455 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/dts-v1/; -#include "dt-bindings/clock/microchip,mpfs-clock.h" -#include "microchip-mpfs-fabric.dtsi" - -/ { - #address-cells = <2>; - #size-cells = <2>; - model = "Microchip PolarFire SoC"; - compatible = "microchip,mpfs"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "sifive,e51", "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - reg = <0>; - riscv,isa = "rv64imac"; - clocks = <&clkcfg CLK_CPU>; - status = "disabled"; - - cpu0_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu1: cpu@1 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <1>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu1_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu2: cpu@2 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <2>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu2_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu3: cpu@3 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <3>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - - cpu3_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - - cpu4: cpu@4 { - compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - reg = <4>; - riscv,isa = "rv64imafdc"; - clocks = <&clkcfg CLK_CPU>; - tlb-split; - status = "okay"; - cpu4_intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - - refclk: mssrefclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; - - syscontroller: syscontroller { - compatible = "microchip,mpfs-sys-controller"; - mboxes = <&mbox 0>; - }; - - soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - ranges; - - cctrllr: cache-controller@2010000 { - compatible = "sifive,fu540-c000-ccache", "cache"; - reg = <0x0 0x2010000 0x0 0x1000>; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <1024>; - cache-size = <2097152>; - cache-unified; - interrupt-parent = <&plic>; - interrupts = <1>, <2>, <3>; - }; - - clint: clint@2000000 { - compatible = "sifive,fu540-c000-clint", "sifive,clint0"; - reg = <0x0 0x2000000 0x0 0xC000>; - interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, - <&cpu1_intc 3>, <&cpu1_intc 7>, - <&cpu2_intc 3>, <&cpu2_intc 7>, - <&cpu3_intc 3>, <&cpu3_intc 7>, - <&cpu4_intc 3>, <&cpu4_intc 7>; - }; - - plic: interrupt-controller@c000000 { - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; - reg = <0x0 0xc000000 0x0 0x4000000>; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts-extended = <&cpu0_intc 11>, - <&cpu1_intc 11>, <&cpu1_intc 9>, - <&cpu2_intc 11>, <&cpu2_intc 9>, - <&cpu3_intc 11>, <&cpu3_intc 9>, - <&cpu4_intc 11>, <&cpu4_intc 9>; - riscv,ndev = <186>; - }; - - clkcfg: clkcfg@20002000 { - compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; - clocks = <&refclk>; - #clock-cells = <1>; - }; - - mmuart0: serial@20000000 { - compatible = "ns16550a"; - reg = <0x0 0x20000000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <90>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART0>; - status = "disabled"; /* Reserved for the HSS */ - }; - - mmuart1: serial@20100000 { - compatible = "ns16550a"; - reg = <0x0 0x20100000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <91>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART1>; - status = "disabled"; - }; - - mmuart2: serial@20102000 { - compatible = "ns16550a"; - reg = <0x0 0x20102000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <92>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART2>; - status = "disabled"; - }; - - mmuart3: serial@20104000 { - compatible = "ns16550a"; - reg = <0x0 0x20104000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <93>; - current-speed = <115200>; - clocks = <&clkcfg CLK_MMUART3>; - status = "disabled"; - }; - - mmuart4: serial@20106000 { - compatible = "ns16550a"; - reg = <0x0 0x20106000 0x0 0x400>; - reg-io-width = <4>; - reg-shift = <2>; - interrupt-parent = <&plic>; - interrupts = <94>; - clocks = <&clkcfg CLK_MMUART4>; - current-speed = <115200>; - status = "disabled"; - }; - - /* Common node entry for emmc/sd */ - mmc: mmc@20008000 { - compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; - reg = <0x0 0x20008000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <88>; - clocks = <&clkcfg CLK_MMC>; - max-frequency = <200000000>; - status = "disabled"; - }; - - spi0: spi@20108000 { - compatible = "microchip,mpfs-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20108000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <54>; - clocks = <&clkcfg CLK_SPI0>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - spi1: spi@20109000 { - compatible = "microchip,mpfs-spi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20109000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <55>; - clocks = <&clkcfg CLK_SPI1>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - qspi: spi@21000000 { - compatible = "microchip,mpfs-qspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x21000000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <85>; - clocks = <&clkcfg CLK_QSPI>; - spi-max-frequency = <25000000>; - status = "disabled"; - }; - - i2c0: i2c@2010a000 { - compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; - reg = <0x0 0x2010a000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <58>; - clocks = <&clkcfg CLK_I2C0>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c1: i2c@2010b000 { - compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; - reg = <0x0 0x2010b000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <61>; - clocks = <&clkcfg CLK_I2C1>; - clock-frequency = <100000>; - status = "disabled"; - }; - - mac0: ethernet@20110000 { - compatible = "cdns,macb"; - reg = <0x0 0x20110000 0x0 0x2000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <64>, <65>, <66>, <67>, <68>, <69>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; - status = "disabled"; - }; - - mac1: ethernet@20112000 { - compatible = "cdns,macb"; - reg = <0x0 0x20112000 0x0 0x2000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&plic>; - interrupts = <70>, <71>, <72>, <73>, <74>, <75>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; - clock-names = "pclk", "hclk"; - status = "disabled"; - }; - - gpio0: gpio@20120000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20120000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO0>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - gpio1: gpio@20121000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20121000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO1>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - gpio2: gpio@20122000 { - compatible = "microchip,mpfs-gpio"; - reg = <0x0 0x20122000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&clkcfg CLK_GPIO2>; - gpio-controller; - #gpio-cells = <2>; - status = "disabled"; - }; - - rtc: rtc@20124000 { - compatible = "microchip,mpfs-rtc"; - reg = <0x0 0x20124000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <80>, <81>; - clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; - clock-names = "rtc", "rtcref"; - status = "disabled"; - }; - - usb: usb@20201000 { - compatible = "microchip,mpfs-musb"; - reg = <0x0 0x20201000 0x0 0x1000>; - interrupt-parent = <&plic>; - interrupts = <86>, <87>; - clocks = <&clkcfg CLK_USB>; - interrupt-names = "dma","mc"; - status = "disabled"; - }; - - pcie: pcie@2000000000 { - compatible = "microchip,pcie-host-1.0"; - #address-cells = <0x3>; - #interrupt-cells = <0x1>; - #size-cells = <0x2>; - device_type = "pci"; - reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; - reg-names = "cfg", "apb"; - bus-range = <0x0 0x7f>; - interrupt-parent = <&plic>; - interrupts = <119>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - interrupt-map-mask = <0 0 0 7>; - clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; - clock-names = "fic0", "fic1", "fic3"; - ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; - msi-parent = <&pcie>; - msi-controller; - microchip,axi-m-atr0 = <0x10 0x0>; - status = "disabled"; - pcie_intc: legacy-interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - mbox: mailbox@37020000 { - compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; - interrupt-parent = <&plic>; - interrupts = <96>; - #mbox-cells = <1>; - status = "disabled"; - }; - }; -}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi new file mode 100644 index 000000000000..ccaac3371cf9 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + core_pwm0: pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x41000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <2>; + clocks = <&fabric_clk3>; + status = "disabled"; + }; + + i2c2: i2c@44000000 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x44000000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&fabric_clk3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts new file mode 100644 index 000000000000..84b0015dfd47 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + model = "Microchip PolarFire-SoC Icicle Kit"; + compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x2e000000>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x40000000>; + status = "okay"; + }; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&mmc { + status = "okay"; + + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&mac1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy1>; + phy1: ethernet-phy@9 { + reg = <9>; + ti,fifo-depth = <0x1>; + }; + phy0: ethernet-phy@8 { + reg = <8>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&mbox { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&core_pwm0 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi new file mode 100644 index 000000000000..7d2c226479d3 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" +#include "mpfs-fabric.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Microchip PolarFire SoC"; + compatible = "microchip,mpfs"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "sifive,e51", "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + reg = <0>; + riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; + status = "disabled"; + + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu1: cpu@1 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <1>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu2: cpu@2 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <2>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu2_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu3: cpu@3 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <3>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + + cpu3_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + + cpu4: cpu@4 { + compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + reg = <4>; + riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; + tlb-split; + status = "okay"; + cpu4_intc: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + + refclk: mssrefclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + cctrllr: cache-controller@2010000 { + compatible = "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <1024>; + cache-size = <2097152>; + cache-unified; + interrupt-parent = <&plic>; + interrupts = <1>, <2>, <3>; + }; + + clint: clint@2000000 { + compatible = "sifive,fu540-c000-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0xC000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + plic: interrupt-controller@c000000 { + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + riscv,ndev = <186>; + }; + + clkcfg: clkcfg@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + clocks = <&refclk>; + #clock-cells = <1>; + }; + + mmuart0: serial@20000000 { + compatible = "ns16550a"; + reg = <0x0 0x20000000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <90>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART0>; + status = "disabled"; /* Reserved for the HSS */ + }; + + mmuart1: serial@20100000 { + compatible = "ns16550a"; + reg = <0x0 0x20100000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <91>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART1>; + status = "disabled"; + }; + + mmuart2: serial@20102000 { + compatible = "ns16550a"; + reg = <0x0 0x20102000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <92>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART2>; + status = "disabled"; + }; + + mmuart3: serial@20104000 { + compatible = "ns16550a"; + reg = <0x0 0x20104000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <93>; + current-speed = <115200>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <94>; + clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; + status = "disabled"; + }; + + /* Common node entry for emmc/sd */ + mmc: mmc@20008000 { + compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; + reg = <0x0 0x20008000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; + max-frequency = <200000000>; + status = "disabled"; + }; + + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,mpfs-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { + compatible = "cdns,macb"; + reg = <0x0 0x20110000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + mac1: ethernet@20112000 { + compatible = "cdns,macb"; + reg = <0x0 0x20112000 0x0 0x2000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20121000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>; + clock-names = "rtc", "rtcref"; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,mpfs-musb"; + reg = <0x0 0x20201000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; + interrupt-names = "dma","mc"; + status = "disabled"; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + microchip,axi-m-atr0 = <0x10 0x0>; + status = "disabled"; + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = <96>; + #mbox-cells = <1>; + status = "disabled"; + }; + }; +}; -- cgit v1.3-18-gd494 From e8c81d649abc3fa02a7063c27a42b6e214a67362 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:05 +0100 Subject: dt-bindings: riscv: microchip: document icicle reference design Add a compatible for the icicle kit's reference design. This represents the FPGA fabric's contents & is versioned to denote which release of the reference design it applies to. Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Acked-by: Rob Herring Link: https://lore.kernel.org/r/20220509142610.128590-5-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/microchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 3f981e897126..822a711df9e9 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -20,6 +20,7 @@ properties: items: - enum: - microchip,mpfs-icicle-kit + - microchip,mpfs-icicle-reference-rtlv2203 - const: microchip,mpfs additionalProperties: true -- cgit v1.3-18-gd494 From 1277b19506f8aa88a7b78f6b1ed66749c1ecc58a Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:06 +0100 Subject: riscv: dts: microchip: make the fabric dtsi board specific Currently mpfs-fabric.dtsi is included by mpfs.dtsi - which is fine currently since there is only one board with this SoC upstream. However if another board was added, it would include the fabric contents of the Icicle Kit's reference design. To avoid this, rename mpfs-fabric.dtsi to mpfs-icicle-kit-fabric.dtsi & include it in the dts rather than mpfs.dtsi. mpfs-icicle-kit-fabric.dtsi specifically matches the 22.03 reference design for the icicle kit's FPGA fabric & an older version of the design may not have the i2c or pwm devices - so add the compatible string to document this. Reviewed-by: Heiko Stuebner Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-6-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi | 37 -------------------- .../boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 39 ++++++++++++++++++++++ arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 1 + arch/riscv/boot/dts/microchip/mpfs.dtsi | 1 - 4 files changed, 40 insertions(+), 38 deletions(-) delete mode 100644 arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi diff --git a/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi deleted file mode 100644 index ccaac3371cf9..000000000000 --- a/arch/riscv/boot/dts/microchip/mpfs-fabric.dtsi +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020-2021 Microchip Technology Inc */ - -/ { - core_pwm0: pwm@41000000 { - compatible = "microchip,corepwm-rtl-v4"; - reg = <0x0 0x41000000 0x0 0xF0>; - microchip,sync-update-mask = /bits/ 32 <0>; - #pwm-cells = <2>; - clocks = <&fabric_clk3>; - status = "disabled"; - }; - - i2c2: i2c@44000000 { - compatible = "microchip,corei2c-rtl-v7"; - reg = <0x0 0x44000000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&fabric_clk3>; - interrupt-parent = <&plic>; - interrupts = <122>; - clock-frequency = <100000>; - status = "disabled"; - }; - - fabric_clk3: fabric-clk3 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <62500000>; - }; - - fabric_clk1: fabric-clk1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; -}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi new file mode 100644 index 000000000000..0d28858b83f2 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + compatible = "microchip,mpfs-icicle-reference-rtlv2203", "microchip,mpfs"; + + core_pwm0: pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x41000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <2>; + clocks = <&fabric_clk3>; + status = "disabled"; + }; + + i2c2: i2c@44000000 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x44000000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&fabric_clk3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; + + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 84b0015dfd47..739dfa52bed1 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" /* Clock frequency (in Hz) of the rtcclk */ #define RTCCLK_FREQ 1000000 diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 7d2c226479d3..8c3259134194 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -3,7 +3,6 @@ /dts-v1/; #include "dt-bindings/clock/microchip,mpfs-clock.h" -#include "mpfs-fabric.dtsi" / { #address-cells = <2>; -- cgit v1.3-18-gd494 From 83b8b2a464965ef40d59c61229e6bdc1844d0706 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:07 +0100 Subject: dt-bindings: vendor-prefixes: add Sundance DSP Sundance DSP Inc. (https://www.sundancedsp.com/) is a supplier of high-performance DSP and FPGA processor boards and I/O modules. Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-7-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 495a01ced97e..6bb20b4554d7 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1207,6 +1207,8 @@ patternProperties: description: Summit microelectronics "^sunchip,.*": description: Shenzhen Sunchip Technology Co., Ltd + "^sundance,.*": + description: Sundance DSP Inc. "^sunplus,.*": description: Sunplus Technology Co., Ltd. "^SUNW,.*": -- cgit v1.3-18-gd494 From b847d32ae7c3c49111e98419ef2a5a65d9e1f51f Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:08 +0100 Subject: dt-bindings: riscv: microchip: add polarberry compatible string Add a binding for the Sundance Polarberry board. Acked-by: Krzysztof Kozlowski Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-8-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- Documentation/devicetree/bindings/riscv/microchip.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 822a711df9e9..1aa7336a9672 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -21,6 +21,7 @@ properties: - enum: - microchip,mpfs-icicle-kit - microchip,mpfs-icicle-reference-rtlv2203 + - sundance,polarberry - const: microchip,mpfs additionalProperties: true -- cgit v1.3-18-gd494 From bc47b2217f246ed0bf0305dd7572f76fc8a3b85c Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:09 +0100 Subject: riscv: dts: microchip: add the sundance polarberry Add a minimal device tree for the PolarFire SoC based Sundance PolarBerry. Reviewed-by: Heiko Stuebner Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220509142610.128590-9-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/Makefile | 1 + .../boot/dts/microchip/mpfs-polarberry-fabric.dtsi | 16 ++++ arch/riscv/boot/dts/microchip/mpfs-polarberry.dts | 99 ++++++++++++++++++++++ 3 files changed, 116 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-polarberry.dts diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index af3a5059b350..39aae7b04f1c 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi new file mode 100644 index 000000000000..49380c428ec9 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts new file mode 100644 index 000000000000..82c93c8f5c17 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2022 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-polarberry-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define MTIMER_FREQ 1000000 + +/ { + model = "Sundance PolarBerry"; + compatible = "sundance,polarberry", "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = ; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x2e000000>; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x00000000 0x0 0xC0000000>; + }; +}; + +/* + * phy0 is connected to mac0, but the port itself is on the (optional) carrier + * board. + */ +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "disabled"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@5 { + reg = <5>; + ti,fifo-depth = <0x01>; + }; + + phy0: ethernet-phy@4 { + reg = <4>; + ti,fifo-depth = <0x01>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart0 { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; -- cgit v1.3-18-gd494 From 1bcea0303ff32d0d1671226d77dc837eef1a93c9 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:10 +0100 Subject: riscv: microchip: icicle: readability fixes Fix the sort order of the status properties, remove some extra whitespace in the mmc entry & add whitespace to the mac entry containing the phys so that the dt is easier to read. Signed-off-by: Conor Dooley Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220509142610.128590-10-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 739dfa52bed1..9cd1a30edf2c 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -64,8 +64,6 @@ }; &mmc { - status = "okay"; - bus-width = <4>; disable-wp; cap-sd-highspeed; @@ -77,6 +75,7 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + status = "okay"; }; &spi0 { @@ -106,16 +105,19 @@ &mac0 { phy-mode = "sgmii"; phy-handle = <&phy0>; + status = "okay"; }; &mac1 { - status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy1>; + status = "okay"; + phy1: ethernet-phy@9 { reg = <9>; ti,fifo-depth = <0x1>; }; + phy0: ethernet-phy@8 { reg = <8>; ti,fifo-depth = <0x1>; -- cgit v1.3-18-gd494 From df403b7c95aaaff3689ecb254c443967badca9ac Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 9 May 2022 15:26:11 +0100 Subject: riscv: dts: icicle: sort nodes alphabetically The icicle device tree is in a "random" order, so clean it up and sort its elements alphabetically to match the newly added PolarBerry dts. Signed-off-by: Conor Dooley Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20220509142610.128590-11-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt --- arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 104 +++++++++++----------- 1 file changed, 52 insertions(+), 52 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 9cd1a30edf2c..044982a11df5 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -43,23 +43,57 @@ }; }; -&refclk { - clock-frequency = <125000000>; +&core_pwm0 { + status = "okay"; }; -&mmuart1 { +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; status = "okay"; }; -&mmuart2 { +&i2c0 { status = "okay"; }; -&mmuart3 { +&i2c1 { status = "okay"; }; -&mmuart4 { +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + ti,fifo-depth = <0x1>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + ti,fifo-depth = <0x1>; + }; +}; + +&mbox { status = "okay"; }; @@ -78,74 +112,43 @@ status = "okay"; }; -&spi0 { - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&qspi { +&mmuart1 { status = "okay"; }; -&i2c0 { +&mmuart2 { status = "okay"; }; -&i2c1 { +&mmuart3 { status = "okay"; }; -&i2c2 { +&mmuart4 { status = "okay"; }; -&mac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; +&pcie { status = "okay"; }; -&mac1 { - phy-mode = "sgmii"; - phy-handle = <&phy1>; +&qspi { status = "okay"; - - phy1: ethernet-phy@9 { - reg = <9>; - ti,fifo-depth = <0x1>; - }; - - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x1>; - }; }; -&gpio2 { - interrupts = <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>, - <53>, <53>, <53>, <53>; - status = "okay"; +&refclk { + clock-frequency = <125000000>; }; &rtc { status = "okay"; }; -&usb { +&spi0 { status = "okay"; - dr_mode = "host"; }; -&mbox { +&spi1 { status = "okay"; }; @@ -153,10 +156,7 @@ status = "okay"; }; -&pcie { - status = "okay"; -}; - -&core_pwm0 { +&usb { status = "okay"; + dr_mode = "host"; }; -- cgit v1.3-18-gd494