From 649ca820dab3d76e12408b74af3e8e97abb07ae0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 8 Jun 2015 09:56:20 -0700 Subject: hwmon: (ltc2978) Add support for LTC2975 LTC2975 is mostly compatible to LTC2974, but supports input current and power measurement. Tested-by: Michael Jones Signed-off-by: Guenter Roeck --- .../devicetree/bindings/hwmon/ltc2978.txt | 3 +- Documentation/hwmon/ltc2978 | 47 ++++++---- drivers/hwmon/pmbus/Kconfig | 4 +- drivers/hwmon/pmbus/ltc2978.c | 104 +++++++++++++++++++-- 4 files changed, 125 insertions(+), 33 deletions(-) diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt index c1d23c14ddd9..e434d5fba2ae 100644 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -3,6 +3,7 @@ ltc2978 Required properties: - compatible: should contain one of: * "lltc,ltc2974" + * "lltc,ltc2975" * "lltc,ltc2977" * "lltc,ltc2978" * "lltc,ltc3880" @@ -19,7 +20,7 @@ Optional properties: standard binding for regulators; see regulator.txt. Valid names of regulators depend on number of supplies supported per device: - * ltc2974 : vout0 - vout3 + * ltc2974, ltc2975 : vout0 - vout3 * ltc2977 : vout0 - vout7 * ltc2978 : vout0 - vout7 * ltc3880, ltc3882 : vout0 - vout1 diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978 index ff130997f22e..7e982884e359 100644 --- a/Documentation/hwmon/ltc2978 +++ b/Documentation/hwmon/ltc2978 @@ -6,6 +6,10 @@ Supported chips: Prefix: 'ltc2974' Addresses scanned: - Datasheet: http://www.linear.com/product/ltc2974 + * Linear Technology LTC2975 + Prefix: 'ltc2975' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2975 * Linear Technology LTC2977 Prefix: 'ltc2977' Addresses scanned: - @@ -42,7 +46,7 @@ Author: Guenter Roeck Description ----------- -LTC2974 is a quad digital power supply managers. +LTC2974 and LTC2975 are quad digital power supply managers. LTC2978 is an octal power supply monitor. LTC2977 is a pin compatible replacement for LTC2978. LTC3880, LTC3882, and LTC3887 are dual output poly-phase step-down DC/DC @@ -71,23 +75,23 @@ in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. in1_max Maximum input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. in1_lcrit Critical minimum input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. in1_crit Critical maximum input voltage. in1_min_alarm Input voltage low alarm. in1_max_alarm Input voltage high alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. in1_lcrit_alarm Input voltage critical low alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. in1_crit_alarm Input voltage critical high alarm. in1_lowest Lowest input voltage. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. in1_highest Highest input voltage. in1_reset_history Reset input voltage history. in[N]_label "vout[1-8]". - LTC2974: N=2-5 + LTC2974, LTC2975: N=2-5 LTC2977: N=2-9 LTC2978: N=2-9 LTC3880, LTC3882, LTC3887, LTM4676: N=2-3 @@ -101,13 +105,14 @@ in[N]_min_alarm Output voltage low alarm. in[N]_max_alarm Output voltage high alarm. in[N]_lcrit_alarm Output voltage critical low alarm. in[N]_crit_alarm Output voltage critical high alarm. -in[N]_lowest Lowest output voltage. LTC2974 and LTC2978 only. +in[N]_lowest Lowest output voltage. LTC2974, LTC2975, + and LTC2978 only. in[N]_highest Highest output voltage. in[N]_reset_history Reset output voltage history. temp[N]_input Measured temperature. - On LTC2974, temp[1-4] report external temperatures, - and temp5 reports the chip temperature. + On LTC2974 and LTC2975, temp[1-4] report external + temperatures, and temp5 reports the chip temperature. On LTC2977 and LTC2978, only one temperature measurement is supported and reports the chip temperature. On LTC3880, LTC3882, LTC3887, and LTM4676, temp1 and @@ -120,23 +125,24 @@ temp[N]_max Maximum temperature. temp[N]_lcrit Critical low temperature. temp[N]_crit Critical high temperature. temp[N]_min_alarm Temperature low alarm. - LTC2974, LTC2977, and LTC2978 only. + LTC2974, LTC2975, LTC2977, and LTC2978 only. temp[N]_max_alarm Temperature high alarm. temp[N]_lcrit_alarm Temperature critical low alarm. temp[N]_crit_alarm Temperature critical high alarm. temp[N]_lowest Lowest measured temperature. - LTC2974, LTC2977, and LTC2978 only. - Not supported for chip temperature sensor on LTC2974. + LTC2974, LTC2975, LTC2977, and LTC2978 only. + Not supported for chip temperature sensor on LTC2974 and + LTC2975. temp[N]_highest Highest measured temperature. Not supported for chip - temperature sensor on LTC2974. + temperature sensor on LTC2974 and LTC2975. temp[N]_reset_history Reset temperature history. Not supported for chip - temperature sensor on LTC2974. + temperature sensor on LTC2974 and LTC2975. power1_label "pin". LTC3883 only. power1_input Measured input power. power[N]_label "pout[1-4]". - LTC2974: N=1-4 + LTC2974, LTC2975: N=1-4 LTC2977: Not supported LTC2978: Not supported LTC3880, LTC3882, LTC3887, LTM4676: N=1-2 @@ -151,7 +157,7 @@ curr1_highest Highest input current. LTC3883 only. curr1_reset_history Reset input current history. LTC3883 only. curr[N]_label "iout[1-4]". - LTC2974: N=1-4 + LTC2974, LTC2975: N=1-4 LTC2977: not supported LTC2978: not supported LTC3880, LTC3882, LTC3887, LTM4676: N=2-3 @@ -159,10 +165,11 @@ curr[N]_label "iout[1-4]". curr[N]_input Measured output current. curr[N]_max Maximum output current. curr[N]_crit Critical high output current. -curr[N]_lcrit Critical low output current. LTC2974 only. +curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only. curr[N]_max_alarm Output current high alarm. curr[N]_crit_alarm Output current critical high alarm. -curr[N]_lcrit_alarm Output current critical low alarm. LTC2974 only. -curr[N]_lowest Lowest output current. LTC2974 only. +curr[N]_lcrit_alarm Output current critical low alarm. + LTC2974 and LTC2975 only. +curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only. curr[N]_highest Highest output current. curr[N]_reset_history Reset output current history. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 43b6de900ce5..8279727987cb 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -52,8 +52,8 @@ config SENSORS_LTC2978 default n help If you say yes here you get hardware monitoring support for Linear - Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTC3887, - and LTM4676. + Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC3880, LTC3883, + LTC3887, and LTM4676. This driver can also be built as a module. If so, the module will be called ltc2978. diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c index 0756d8ae9dad..e153ffd59ab0 100644 --- a/drivers/hwmon/pmbus/ltc2978.c +++ b/drivers/hwmon/pmbus/ltc2978.c @@ -1,9 +1,8 @@ /* - * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880, - * LTC3883, LTC3887. and LTM4676 + * Hardware monitoring driver for LTC2978 and compatible chips. * * Copyright (c) 2011 Ericsson AB. - * Copyright (c) 2013, 2014 Guenter Roeck + * Copyright (c) 2013, 2014, 2015 Guenter Roeck * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,8 +24,8 @@ #include #include "pmbus.h" -enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltc3887, - ltm4676 }; +enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, + ltc3887, ltm4676 }; /* Common for all chips */ #define LTC2978_MFR_VOUT_PEAK 0xdd @@ -34,12 +33,12 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltc3887, #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf #define LTC2978_MFR_SPECIAL_ID 0xe7 /* Not on LTC3882 */ -/* LTC2974, LCT2977, and LTC2978 */ +/* LTC2974, LTC2975, LCT2977, and LTC2978 */ #define LTC2978_MFR_VOUT_MIN 0xfb #define LTC2978_MFR_VIN_MIN 0xfc #define LTC2978_MFR_TEMPERATURE_MIN 0xfd -/* LTC2974 only */ +/* LTC2974, LTC2975 */ #define LTC2974_MFR_IOUT_PEAK 0xd7 #define LTC2974_MFR_IOUT_MIN 0xd8 @@ -51,8 +50,15 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltc3887, /* LTC3883 only */ #define LTC3883_MFR_IIN_PEAK 0xe1 +/* LTC2975 only */ +#define LTC2975_MFR_IIN_PEAK 0xc4 +#define LTC2975_MFR_IIN_MIN 0xc5 +#define LTC2975_MFR_PIN_PEAK 0xc6 +#define LTC2975_MFR_PIN_MIN 0xc7 + #define LTC2974_ID_REV1 0x0212 #define LTC2974_ID_REV2 0x0213 +#define LTC2975_ID 0x0223 #define LTC2977_ID 0x0130 #define LTC2978_ID_REV1 0x0121 #define LTC2978_ID_REV2 0x0122 @@ -87,7 +93,8 @@ struct ltc2978_data { u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES]; u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES]; u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES]; - u16 iin_max; + u16 iin_min, iin_max; + u16 pin_min, pin_max; u16 temp2_max; struct pmbus_driver_info info; }; @@ -246,6 +253,60 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg) return ret; } +static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct ltc2978_data *data = to_ltc2978_data(info); + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_IIN_MAX: + ret = pmbus_read_word_data(client, page, LTC2975_MFR_IIN_PEAK); + if (ret >= 0) { + if (lin11_to_val(ret) + > lin11_to_val(data->iin_max)) + data->iin_max = ret; + ret = data->iin_max; + } + break; + case PMBUS_VIRT_READ_IIN_MIN: + ret = pmbus_read_word_data(client, page, LTC2975_MFR_IIN_MIN); + if (ret >= 0) { + if (lin11_to_val(ret) + < lin11_to_val(data->iin_min)) + data->iin_min = ret; + ret = data->iin_min; + } + break; + case PMBUS_VIRT_READ_PIN_MAX: + ret = pmbus_read_word_data(client, page, LTC2975_MFR_PIN_PEAK); + if (ret >= 0) { + if (lin11_to_val(ret) + > lin11_to_val(data->pin_max)) + data->pin_max = ret; + ret = data->pin_max; + } + break; + case PMBUS_VIRT_READ_PIN_MIN: + ret = pmbus_read_word_data(client, page, LTC2975_MFR_PIN_MIN); + if (ret >= 0) { + if (lin11_to_val(ret) + < lin11_to_val(data->pin_min)) + data->pin_min = ret; + ret = data->pin_min; + } + break; + case PMBUS_VIRT_RESET_IIN_HISTORY: + case PMBUS_VIRT_RESET_PIN_HISTORY: + ret = 0; + break; + default: + ret = ltc2978_read_word_data(client, page, reg); + break; + } + return ret; +} + static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); @@ -337,7 +398,13 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, switch (reg) { case PMBUS_VIRT_RESET_IIN_HISTORY: data->iin_max = 0x7c00; - ret = ltc2978_clear_peaks(client, page, data->id); + data->iin_min = 0x7bff; + ret = ltc2978_clear_peaks(client, 0, data->id); + break; + case PMBUS_VIRT_RESET_PIN_HISTORY: + data->pin_max = 0x7c00; + data->pin_min = 0x7bff; + ret = ltc2978_clear_peaks(client, 0, data->id); break; case PMBUS_VIRT_RESET_IOUT_HISTORY: data->iout_max[page] = 0x7c00; @@ -372,6 +439,7 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, static const struct i2c_device_id ltc2978_id[] = { {"ltc2974", ltc2974}, + {"ltc2975", ltc2975}, {"ltc2977", ltc2977}, {"ltc2978", ltc2978}, {"ltc3880", ltc3880}, @@ -428,6 +496,8 @@ static int ltc2978_get_id(struct i2c_client *client) if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) return ltc2974; + else if (chip_id == LTC2975_ID) + return ltc2975; else if (chip_id == LTC2977_ID) return ltc2977; else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2 || @@ -505,6 +575,19 @@ static int ltc2978_probe(struct i2c_client *client, | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; } break; + case ltc2975: + info->read_word_data = ltc2975_read_word_data; + info->pages = LTC2974_NUM_PAGES; + info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP2; + for (i = 0; i < info->pages; i++) { + info->func[i] |= PMBUS_HAVE_VOUT + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; + } + break; case ltc2977: case ltc2978: info->read_word_data = ltc2978_read_word_data; @@ -576,6 +659,7 @@ static int ltc2978_probe(struct i2c_client *client, #ifdef CONFIG_OF static const struct of_device_id ltc2978_of_match[] = { { .compatible = "lltc,ltc2974" }, + { .compatible = "lltc,ltc2975" }, { .compatible = "lltc,ltc2977" }, { .compatible = "lltc,ltc2978" }, { .compatible = "lltc,ltc3880" }, @@ -601,5 +685,5 @@ static struct i2c_driver ltc2978_driver = { module_i2c_driver(ltc2978_driver); MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676"); +MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b