From 260c48b7ec26dfaf70d9230c3639f420e304e781 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 12 Aug 2018 13:42:06 +0200 Subject: ASoC: Intel: bytcr_rt5640: Add quirks for 2 more devices Add quirks to select the right input-map, jack-detect pin, etc. for: Linx Linx7 tablet Onda V975w tablet Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index d32844f94d74..b6dc524830b2 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -575,6 +575,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_MONO_SPEAKER | BYT_RT5640_MCLK_EN), }, + { /* Linx Linx7 tablet */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LINX"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LINX7"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* MSI S100 tablet */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."), @@ -602,6 +613,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Onda v975w */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* The above are too generic, also match BIOS info */ + DMI_EXACT_MATCH(DMI_BIOS_VERSION, "5.6.5"), + DMI_EXACT_MATCH(DMI_BIOS_DATE, "07/25/2014"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_MCLK_EN), + }, { /* Pipo W4 */ .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), -- cgit v1.2.3-59-g8ed1b From 5e4cfadaf5b73a0801b2fa7fb007f98400ebfe6e Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Tue, 14 Aug 2018 00:35:56 +0200 Subject: ASoC: wm9712: fix replace codec to component Since commit 143b44845d87 ("ASoC: wm9712: replace codec to component") "wm9712-codec" got renamed to "wm9712-component", however, this change never got propagated down to the actual board/platform drivers. E.g. on Colibri T20 this lead to the following spew upon boot with sound/touch being broken: [ 2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered [ 3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517) ... [ 14.970443] ALSA device list: [ 14.996628] No soundcards found. This commit finally fixes this again. Signed-off-by: Marcel Ziswiler Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm9712.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 953d94d50586..ade34c26ad2f 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -719,7 +719,7 @@ static int wm9712_probe(struct platform_device *pdev) static struct platform_driver wm9712_component_driver = { .driver = { - .name = "wm9712-component", + .name = "wm9712-codec", }, .probe = wm9712_probe, -- cgit v1.2.3-59-g8ed1b From fb504caae7ef85be159743bd4b08ecde269ba55f Mon Sep 17 00:00:00 2001 From: "Dmitry V. Levin" Date: Mon, 13 Aug 2018 18:50:02 +0300 Subject: ASoC: uapi: fix sound/skl-tplg-interface.h userspace compilation errors Include and consistently use types it provides to fix the following sound/skl-tplg-interface.h userspace compilation errors: /usr/include/sound/skl-tplg-interface.h:146:2: error: unknown type name 'u32' u32 set_params:2; /usr/include/sound/skl-tplg-interface.h:147:2: error: unknown type name 'u32' u32 rsvd:30; /usr/include/sound/skl-tplg-interface.h:148:2: error: unknown type name 'u32' u32 param_id; /usr/include/sound/skl-tplg-interface.h:149:2: error: unknown type name 'u32' u32 max; /usr/include/sound/skl-tplg-interface.h:166:2: error: unknown type name 'u16' u16 module_id; /usr/include/sound/skl-tplg-interface.h:167:2: error: unknown type name 'u16' u16 instance_id; /usr/include/sound/skl-tplg-interface.h:171:2: error: unknown type name 'u32' u32 channels; /usr/include/sound/skl-tplg-interface.h:172:2: error: unknown type name 'u32' u32 freq; /usr/include/sound/skl-tplg-interface.h:173:2: error: unknown type name 'u32' u32 bit_depth; /usr/include/sound/skl-tplg-interface.h:174:2: error: unknown type name 'u32' u32 valid_bit_depth; /usr/include/sound/skl-tplg-interface.h:175:2: error: unknown type name 'u32' u32 ch_cfg; /usr/include/sound/skl-tplg-interface.h:176:2: error: unknown type name 'u32' u32 interleaving_style; /usr/include/sound/skl-tplg-interface.h:177:2: error: unknown type name 'u32' u32 sample_type; /usr/include/sound/skl-tplg-interface.h:178:2: error: unknown type name 'u32' u32 ch_map; /usr/include/sound/skl-tplg-interface.h:182:2: error: unknown type name 'u32' u32 set_params:2; /usr/include/sound/skl-tplg-interface.h:183:2: error: unknown type name 'u32' u32 rsvd:30; /usr/include/sound/skl-tplg-interface.h:184:2: error: unknown type name 'u32' u32 param_id; /usr/include/sound/skl-tplg-interface.h:185:2: error: unknown type name 'u32' u32 caps_size; /usr/include/sound/skl-tplg-interface.h:186:2: error: unknown type name 'u32' u32 caps[HDA_SST_CFG_MAX]; /usr/include/sound/skl-tplg-interface.h:190:2: error: unknown type name 'u8' u8 pipe_id; /usr/include/sound/skl-tplg-interface.h:191:2: error: unknown type name 'u8' u8 pipe_priority; /usr/include/sound/skl-tplg-interface.h:192:2: error: unknown type name 'u16' u16 conn_type:4; /usr/include/sound/skl-tplg-interface.h:193:2: error: unknown type name 'u16' u16 rsvd:4; /usr/include/sound/skl-tplg-interface.h:194:2: error: unknown type name 'u16' u16 memory_pages:8; /usr/include/sound/skl-tplg-interface.h:200:2: error: unknown type name 'u16' u16 module_id; /usr/include/sound/skl-tplg-interface.h:201:2: error: unknown type name 'u16' u16 instance_id; /usr/include/sound/skl-tplg-interface.h:202:2: error: unknown type name 'u32' u32 max_mcps; /usr/include/sound/skl-tplg-interface.h:203:2: error: unknown type name 'u32' u32 mem_pages; /usr/include/sound/skl-tplg-interface.h:204:2: error: unknown type name 'u32' u32 obs; /usr/include/sound/skl-tplg-interface.h:205:2: error: unknown type name 'u32' u32 ibs; /usr/include/sound/skl-tplg-interface.h:206:2: error: unknown type name 'u32' u32 vbus_id; /usr/include/sound/skl-tplg-interface.h:208:2: error: unknown type name 'u32' u32 max_in_queue:8; /usr/include/sound/skl-tplg-interface.h:209:2: error: unknown type name 'u32' u32 max_out_queue:8; /usr/include/sound/skl-tplg-interface.h:210:2: error: unknown type name 'u32' u32 time_slot:8; /usr/include/sound/skl-tplg-interface.h:211:2: error: unknown type name 'u32' u32 core_id:4; /usr/include/sound/skl-tplg-interface.h:212:2: error: unknown type name 'u32' u32 rsvd1:4; /usr/include/sound/skl-tplg-interface.h:214:2: error: unknown type name 'u32' u32 module_type:8; /usr/include/sound/skl-tplg-interface.h:215:2: error: unknown type name 'u32' u32 conn_type:4; /usr/include/sound/skl-tplg-interface.h:216:2: error: unknown type name 'u32' u32 dev_type:4; /usr/include/sound/skl-tplg-interface.h:217:2: error: unknown type name 'u32' u32 hw_conn_type:4; /usr/include/sound/skl-tplg-interface.h:218:2: error: unknown type name 'u32' u32 rsvd2:12; /usr/include/sound/skl-tplg-interface.h:220:2: error: unknown type name 'u32' u32 params_fixup:8; /usr/include/sound/skl-tplg-interface.h:221:2: error: unknown type name 'u32' u32 converter:8; /usr/include/sound/skl-tplg-interface.h:222:2: error: unknown type name 'u32' u32 input_pin_type:1; /usr/include/sound/skl-tplg-interface.h:223:2: error: unknown type name 'u32' u32 output_pin_type:1; /usr/include/sound/skl-tplg-interface.h:224:2: error: unknown type name 'u32' u32 is_dynamic_in_pin:1; /usr/include/sound/skl-tplg-interface.h:225:2: error: unknown type name 'u32' u32 is_dynamic_out_pin:1; /usr/include/sound/skl-tplg-interface.h:226:2: error: unknown type name 'u32' u32 is_loadable:1; /usr/include/sound/skl-tplg-interface.h:227:2: error: unknown type name 'u32' u32 rsvd3:11; Fixes: 0c24fdc00244 ("ASoC: topology: Move skl-tplg-interface.h to uapi") Signed-off-by: Dmitry V. Levin Reviewed-by: Guenter Roeck Signed-off-by: Mark Brown Cc: # v4.18 --- include/uapi/sound/skl-tplg-interface.h | 106 ++++++++++++++++---------------- 1 file changed, 54 insertions(+), 52 deletions(-) diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h index f58cafa42f18..f39352cef382 100644 --- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -10,6 +10,8 @@ #ifndef __HDA_TPLG_INTERFACE_H__ #define __HDA_TPLG_INTERFACE_H__ +#include + /* * Default types range from 0~12. type can range from 0 to 0xff * SST types start at higher to avoid any overlapping in future @@ -143,10 +145,10 @@ enum skl_module_param_type { }; struct skl_dfw_algo_data { - u32 set_params:2; - u32 rsvd:30; - u32 param_id; - u32 max; + __u32 set_params:2; + __u32 rsvd:30; + __u32 param_id; + __u32 max; char params[0]; } __packed; @@ -163,68 +165,68 @@ enum skl_tuple_type { /* v4 configuration data */ struct skl_dfw_v4_module_pin { - u16 module_id; - u16 instance_id; + __u16 module_id; + __u16 instance_id; } __packed; struct skl_dfw_v4_module_fmt { - u32 channels; - u32 freq; - u32 bit_depth; - u32 valid_bit_depth; - u32 ch_cfg; - u32 interleaving_style; - u32 sample_type; - u32 ch_map; + __u32 channels; + __u32 freq; + __u32 bit_depth; + __u32 valid_bit_depth; + __u32 ch_cfg; + __u32 interleaving_style; + __u32 sample_type; + __u32 ch_map; } __packed; struct skl_dfw_v4_module_caps { - u32 set_params:2; - u32 rsvd:30; - u32 param_id; - u32 caps_size; - u32 caps[HDA_SST_CFG_MAX]; + __u32 set_params:2; + __u32 rsvd:30; + __u32 param_id; + __u32 caps_size; + __u32 caps[HDA_SST_CFG_MAX]; } __packed; struct skl_dfw_v4_pipe { - u8 pipe_id; - u8 pipe_priority; - u16 conn_type:4; - u16 rsvd:4; - u16 memory_pages:8; + __u8 pipe_id; + __u8 pipe_priority; + __u16 conn_type:4; + __u16 rsvd:4; + __u16 memory_pages:8; } __packed; struct skl_dfw_v4_module { char uuid[SKL_UUID_STR_SZ]; - u16 module_id; - u16 instance_id; - u32 max_mcps; - u32 mem_pages; - u32 obs; - u32 ibs; - u32 vbus_id; - - u32 max_in_queue:8; - u32 max_out_queue:8; - u32 time_slot:8; - u32 core_id:4; - u32 rsvd1:4; - - u32 module_type:8; - u32 conn_type:4; - u32 dev_type:4; - u32 hw_conn_type:4; - u32 rsvd2:12; - - u32 params_fixup:8; - u32 converter:8; - u32 input_pin_type:1; - u32 output_pin_type:1; - u32 is_dynamic_in_pin:1; - u32 is_dynamic_out_pin:1; - u32 is_loadable:1; - u32 rsvd3:11; + __u16 module_id; + __u16 instance_id; + __u32 max_mcps; + __u32 mem_pages; + __u32 obs; + __u32 ibs; + __u32 vbus_id; + + __u32 max_in_queue:8; + __u32 max_out_queue:8; + __u32 time_slot:8; + __u32 core_id:4; + __u32 rsvd1:4; + + __u32 module_type:8; + __u32 conn_type:4; + __u32 dev_type:4; + __u32 hw_conn_type:4; + __u32 rsvd2:12; + + __u32 params_fixup:8; + __u32 converter:8; + __u32 input_pin_type:1; + __u32 output_pin_type:1; + __u32 is_dynamic_in_pin:1; + __u32 is_dynamic_out_pin:1; + __u32 is_loadable:1; + __u32 rsvd3:11; struct skl_dfw_v4_pipe pipe; struct skl_dfw_v4_module_fmt in_fmt[MAX_IN_QUEUE]; -- cgit v1.2.3-59-g8ed1b From 12eeeb4f4733bbc4481d01df35933fc15beb8b19 Mon Sep 17 00:00:00 2001 From: Yong Zhi Date: Mon, 13 Aug 2018 18:15:14 -0500 Subject: ASoC: Intel: Skylake: Acquire irq after RIRB allocation Cold reboot stress test found that the hda irq could access rirb ring buffer before its memory gets allocated which resulting in null pointer dereference inside snd_hdac_bus_update_rirb(). Fix it by moving the skl_acquire_irq after ring buffer allocation. While here, also change err return from -EBUSY to actual error code. Signed-off-by: Yong Zhi Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index dce649485649..cf09721ca13e 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -838,11 +838,7 @@ static int skl_first_init(struct hdac_bus *bus) snd_hdac_bus_parse_capabilities(bus); - if (skl_acquire_irq(bus, 0) < 0) - return -EBUSY; - pci_set_master(pci); - synchronize_irq(bus->irq); gcap = snd_hdac_chip_readw(bus, GCAP); dev_dbg(bus->dev, "chipset global capabilities = 0x%x\n", gcap); @@ -875,6 +871,12 @@ static int skl_first_init(struct hdac_bus *bus) if (err < 0) return err; + err = skl_acquire_irq(bus, 0); + if (err < 0) + return err; + + synchronize_irq(bus->irq); + /* initialize chip */ skl_init_pci(skl); -- cgit v1.2.3-59-g8ed1b From 1a4327fbf4554d5b78d75b19a13d40d6de220159 Mon Sep 17 00:00:00 2001 From: Kirill Kapranov Date: Mon, 13 Aug 2018 19:48:10 +0300 Subject: spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers On systems where some controllers get a dynamic ID assigned and some have a fixed number (e.g. from ACPI tables), the current implementation might run into an IDR collision: in case of a fixed bus number is gotten by a driver (but not marked busy in IDR tree) and a driver with dynamic bus number gets the same ID and predictably fails. Fix this by means of checking-in fixed IDsin IDR as far as dynamic ones at the moment of the controller registration. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Signed-off-by: Kirill Kapranov Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ec395a6baf9c..a00d006d4c3a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2170,6 +2170,15 @@ int spi_register_controller(struct spi_controller *ctlr) if (WARN(id < 0, "couldn't get idr")) return id; ctlr->bus_num = id; + } else { + /* devices with a fixed bus num must check-in with the num */ + mutex_lock(&board_lock); + id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num, + ctlr->bus_num + 1, GFP_KERNEL); + mutex_unlock(&board_lock); + if (WARN(id < 0, "couldn't get idr")) + return id == -ENOSPC ? -EBUSY : id; + ctlr->bus_num = id; } INIT_LIST_HEAD(&ctlr->queue); spin_lock_init(&ctlr->queue_lock); -- cgit v1.2.3-59-g8ed1b From 249dc49576fc953a7378b916c6a6d47ea81e4da2 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 15 Aug 2018 13:11:35 +0100 Subject: ASoC: dapm: Fix NULL pointer deference on CODEC to CODEC DAIs Commit a655de808cbde ("ASoC: core: Allow topology to override machine driver FE DAI link config.") caused soc_dai_hw_params to be come dependent on the substream private_data being set with a pointer to the snd_soc_pcm_runtime. Currently, CODEC to CODEC links don't set this, which causes a NULL pointer dereference: [<4069de54>] (soc_dai_hw_params) from [<40694b68>] (snd_soc_dai_link_event+0x1a0/0x380) Since the ASoC core in general assumes that the substream private_data will be set to a pointer to the snd_soc_pcm_runtime, update the CODEC to CODEC links to respect this. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 1 + sound/soc/soc-core.c | 4 ++-- sound/soc/soc-dapm.c | 4 ++++ 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index af9ef16cc34d..fdaaafdc7a00 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -407,6 +407,7 @@ int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card); void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card); int snd_soc_dapm_new_pcm(struct snd_soc_card *card, + struct snd_soc_pcm_runtime *rtd, const struct snd_soc_pcm_stream *params, unsigned int num_params, struct snd_soc_dapm_widget *source, diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 9cfe10d8040c..473eefe8658e 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1447,7 +1447,7 @@ static int soc_link_dai_widgets(struct snd_soc_card *card, sink = codec_dai->playback_widget; source = cpu_dai->capture_widget; if (sink && source) { - ret = snd_soc_dapm_new_pcm(card, dai_link->params, + ret = snd_soc_dapm_new_pcm(card, rtd, dai_link->params, dai_link->num_params, source, sink); if (ret != 0) { @@ -1460,7 +1460,7 @@ static int soc_link_dai_widgets(struct snd_soc_card *card, sink = cpu_dai->playback_widget; source = codec_dai->capture_widget; if (sink && source) { - ret = snd_soc_dapm_new_pcm(card, dai_link->params, + ret = snd_soc_dapm_new_pcm(card, rtd, dai_link->params, dai_link->num_params, source, sink); if (ret != 0) { diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7e96793050c9..461d951917c0 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3652,6 +3652,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, { struct snd_soc_dapm_path *source_p, *sink_p; struct snd_soc_dai *source, *sink; + struct snd_soc_pcm_runtime *rtd = w->priv; const struct snd_soc_pcm_stream *config = w->params + w->params_select; struct snd_pcm_substream substream; struct snd_pcm_hw_params *params = NULL; @@ -3711,6 +3712,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, goto out; } substream.runtime = runtime; + substream.private_data = rtd; switch (event) { case SND_SOC_DAPM_PRE_PMU: @@ -3895,6 +3897,7 @@ outfree_w_param: } int snd_soc_dapm_new_pcm(struct snd_soc_card *card, + struct snd_soc_pcm_runtime *rtd, const struct snd_soc_pcm_stream *params, unsigned int num_params, struct snd_soc_dapm_widget *source, @@ -3963,6 +3966,7 @@ int snd_soc_dapm_new_pcm(struct snd_soc_card *card, w->params = params; w->num_params = num_params; + w->priv = rtd; ret = snd_soc_dapm_add_path(&card->dapm, source, w, NULL, NULL); if (ret) -- cgit v1.2.3-59-g8ed1b From 0d22825255f25adb6a609f130b42c752d3fd0f5d Mon Sep 17 00:00:00 2001 From: Ryan Lee Date: Wed, 15 Aug 2018 18:53:38 -0700 Subject: ASoC: max98373: Added speaker FS gain cotnrol register to volatile. Signed-off-by: Ryan Lee Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 92b7125ea169..2764fae69333 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -520,6 +520,7 @@ static bool max98373_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case MAX98373_R2000_SW_RESET ... MAX98373_R2009_INT_FLAG3: + case MAX98373_R203E_AMP_PATH_GAIN: case MAX98373_R2054_MEAS_ADC_PVDD_CH_READBACK: case MAX98373_R2055_MEAS_ADC_THERM_CH_READBACK: case MAX98373_R20B6_BDE_CUR_STATE_READBACK: -- cgit v1.2.3-59-g8ed1b From 6f0a256253f48095ba2e5bcdfbed41f21643c105 Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Wed, 15 Aug 2018 14:47:49 +0800 Subject: ASoC: rt5514: Fix the issue of the delay volume applied again After our evaluation, we need to modify the default values to make sure the volume applied immediately. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown --- sound/soc/codecs/rt5514.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index dca82dd6e3bf..32fe76c3134a 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -64,8 +64,8 @@ static const struct reg_sequence rt5514_patch[] = { {RT5514_ANA_CTRL_LDO10, 0x00028604}, {RT5514_ANA_CTRL_ADCFED, 0x00000800}, {RT5514_ASRC_IN_CTRL1, 0x00000003}, - {RT5514_DOWNFILTER0_CTRL3, 0x10000352}, - {RT5514_DOWNFILTER1_CTRL3, 0x10000352}, + {RT5514_DOWNFILTER0_CTRL3, 0x10000342}, + {RT5514_DOWNFILTER1_CTRL3, 0x10000342}, }; static const struct reg_default rt5514_reg[] = { @@ -92,10 +92,10 @@ static const struct reg_default rt5514_reg[] = { {RT5514_ASRC_IN_CTRL1, 0x00000003}, {RT5514_DOWNFILTER0_CTRL1, 0x00020c2f}, {RT5514_DOWNFILTER0_CTRL2, 0x00020c2f}, - {RT5514_DOWNFILTER0_CTRL3, 0x10000352}, + {RT5514_DOWNFILTER0_CTRL3, 0x10000342}, {RT5514_DOWNFILTER1_CTRL1, 0x00020c2f}, {RT5514_DOWNFILTER1_CTRL2, 0x00020c2f}, - {RT5514_DOWNFILTER1_CTRL3, 0x10000352}, + {RT5514_DOWNFILTER1_CTRL3, 0x10000342}, {RT5514_ANA_CTRL_LDO10, 0x00028604}, {RT5514_ANA_CTRL_LDO18_16, 0x02000345}, {RT5514_ANA_CTRL_ADC12, 0x0000a2a8}, -- cgit v1.2.3-59-g8ed1b From 0aebe40bae6cf5652fdc3d05ecee15fbf5748194 Mon Sep 17 00:00:00 2001 From: Shreyas NC Date: Fri, 27 Jul 2018 14:44:08 +0530 Subject: soundwire: Fix duplicate stream state assignment For a SoundWire stream it is expected that a Slave is added to the stream before Master is added. So, move the stream state to CONFIGURED after the first Slave is added and remove the stream state assignment for Master add. Along with these changes, add additional comments to explain the same. Signed-off-by: Shreyas NC Acked-by: Pierre-Louis Bossart Signed-off-by: Vinod Koul --- drivers/soundwire/stream.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 4b5e250e8615..7ba6d4d8cd03 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1123,8 +1123,6 @@ int sdw_stream_add_master(struct sdw_bus *bus, if (ret) goto stream_error; - stream->state = SDW_STREAM_CONFIGURED; - stream_error: sdw_release_master_stream(stream); error: @@ -1141,6 +1139,10 @@ EXPORT_SYMBOL(sdw_stream_add_master); * @stream: SoundWire stream * @port_config: Port configuration for audio stream * @num_ports: Number of ports + * + * It is expected that Slave is added before adding Master + * to the Stream. + * */ int sdw_stream_add_slave(struct sdw_slave *slave, struct sdw_stream_config *stream_config, @@ -1186,6 +1188,12 @@ int sdw_stream_add_slave(struct sdw_slave *slave, if (ret) goto stream_error; + /* + * Change stream state to CONFIGURED on first Slave add. + * Bus is not aware of number of Slave(s) in a stream at this + * point so cannot depend on all Slave(s) to be added in order to + * change stream state to CONFIGURED. + */ stream->state = SDW_STREAM_CONFIGURED; goto error; -- cgit v1.2.3-59-g8ed1b From 3fef1a2259c556cce34df2791688cb3001f81c92 Mon Sep 17 00:00:00 2001 From: Shreyas NC Date: Fri, 27 Jul 2018 14:44:09 +0530 Subject: soundwire: Fix incorrect exit after configuring stream In sdw_stream_add_master() after the Master ports are configured, the stream is released incorrectly. So, fix it by avoiding stream release after configuring the Master for the stream. While at it, rename the label appropriately. Signed-off-by: Shreyas NC Acked-by: Pierre-Louis Bossart Signed-off-by: Vinod Koul --- drivers/soundwire/stream.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 7ba6d4d8cd03..b2682272503e 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1112,7 +1112,7 @@ int sdw_stream_add_master(struct sdw_bus *bus, "Master runtime config failed for stream:%s", stream->name); ret = -ENOMEM; - goto error; + goto unlock; } ret = sdw_config_stream(bus->dev, stream, stream_config, false); @@ -1123,9 +1123,11 @@ int sdw_stream_add_master(struct sdw_bus *bus, if (ret) goto stream_error; + goto unlock; + stream_error: sdw_release_master_stream(stream); -error: +unlock: mutex_unlock(&bus->bus_lock); return ret; } -- cgit v1.2.3-59-g8ed1b From 8d6ccf5cebbc7ed1dee9986e36853a78dfb64084 Mon Sep 17 00:00:00 2001 From: Sanyog Kale Date: Fri, 27 Jul 2018 14:44:10 +0530 Subject: soundwire: Fix acquiring bus lock twice during master release As part of sdw_stream_remove_master(), sdw_stream_remove_slave() is called which results in bus lock being acquired twice. So, fix it by performing specific Slave remove operations in sdw_release_master_stream() instead of calling sdw_stream_remove_slave(). Signed-off-by: Sanyog Kale Signed-off-by: Shreyas NC Acked-by: Pierre-Louis Bossart Signed-off-by: Vinod Koul --- drivers/soundwire/stream.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index b2682272503e..e5c7e1ef6318 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -899,9 +899,10 @@ static void sdw_release_master_stream(struct sdw_stream_runtime *stream) struct sdw_master_runtime *m_rt = stream->m_rt; struct sdw_slave_runtime *s_rt, *_s_rt; - list_for_each_entry_safe(s_rt, _s_rt, - &m_rt->slave_rt_list, m_rt_node) - sdw_stream_remove_slave(s_rt->slave, stream); + list_for_each_entry_safe(s_rt, _s_rt, &m_rt->slave_rt_list, m_rt_node) { + sdw_slave_port_release(s_rt->slave->bus, s_rt->slave, stream); + sdw_release_slave_stream(s_rt->slave, stream); + } list_del(&m_rt->bus_node); } -- cgit v1.2.3-59-g8ed1b From 072ebb3bffe67d71d1f1e52add799f4491eab691 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 27 Aug 2018 01:15:11 -0400 Subject: ext4: add nonstring annotations to ext4.h This suppresses some false positives in gcc 8's -Wstringop-truncation Suggested by Miguel Ojeda (hopefully the __nonstring definition will eventually get accepted in the compiler-gcc.h header file). Signed-off-by: Theodore Ts'o Cc: Miguel Ojeda --- fs/ext4/ext4.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 1fc013f3d944..249bcee4d7b2 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -43,6 +43,17 @@ #define __FS_HAS_ENCRYPTION IS_ENABLED(CONFIG_EXT4_FS_ENCRYPTION) #include +#include + +/* Until this gets included into linux/compiler-gcc.h */ +#ifndef __nonstring +#if defined(GCC_VERSION) && (GCC_VERSION >= 80000) +#define __nonstring __attribute__((nonstring)) +#else +#define __nonstring +#endif +#endif + /* * The fourth extended filesystem constants/structures */ @@ -1226,7 +1237,7 @@ struct ext4_super_block { __le32 s_feature_ro_compat; /* readonly-compatible feature set */ /*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ /*78*/ char s_volume_name[16]; /* volume name */ -/*88*/ char s_last_mounted[64]; /* directory where last mounted */ +/*88*/ char s_last_mounted[64] __nonstring; /* directory where last mounted */ /*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ /* * Performance hints. Directory preallocation should only @@ -1277,13 +1288,13 @@ struct ext4_super_block { __le32 s_first_error_time; /* first time an error happened */ __le32 s_first_error_ino; /* inode involved in first error */ __le64 s_first_error_block; /* block involved of first error */ - __u8 s_first_error_func[32]; /* function where the error happened */ + __u8 s_first_error_func[32] __nonstring; /* function where the error happened */ __le32 s_first_error_line; /* line number where error happened */ __le32 s_last_error_time; /* most recent time of an error */ __le32 s_last_error_ino; /* inode involved in last error */ __le32 s_last_error_line; /* line number where error happened */ __le64 s_last_error_block; /* block involved of last error */ - __u8 s_last_error_func[32]; /* function where the error happened */ + __u8 s_last_error_func[32] __nonstring; /* function where the error happened */ #define EXT4_S_ERR_END offsetof(struct ext4_super_block, s_mount_opts) __u8 s_mount_opts[64]; __le32 s_usr_quota_inum; /* inode for tracking user quota */ -- cgit v1.2.3-59-g8ed1b From b50282f3241acee880514212d88b6049fb5039c8 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 27 Aug 2018 01:47:09 -0400 Subject: ext4: check to make sure the rename(2)'s destination is not freed If the destination of the rename(2) system call exists, the inode's link count (i_nlinks) must be non-zero. If it is, the inode can end up on the orphan list prematurely, leading to all sorts of hilarity, including a use-after-free. https://bugzilla.kernel.org/show_bug.cgi?id=200931 Signed-off-by: Theodore Ts'o Reported-by: Wen Xu Cc: stable@vger.kernel.org --- fs/ext4/namei.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 116ff68c5bd4..377d516c475f 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3478,6 +3478,12 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry, int credits; u8 old_file_type; + if (new.inode && new.inode->i_nlink == 0) { + EXT4_ERROR_INODE(new.inode, + "target of rename is already freed"); + return -EFSCORRUPTED; + } + if ((ext4_test_inode_flag(new_dir, EXT4_INODE_PROJINHERIT)) && (!projid_eq(EXT4_I(new_dir)->i_projid, EXT4_I(old_dentry->d_inode)->i_projid))) -- cgit v1.2.3-59-g8ed1b From 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 27 Aug 2018 09:22:45 -0400 Subject: ext4: avoid divide by zero fault when deleting corrupted inline directories A specially crafted file system can trick empty_inline_dir() into reading past the last valid entry in a inline directory, and then run into the end of xattr marker. This will trigger a divide by zero fault. Fix this by using the size of the inline directory instead of dir->i_size. Also clean up error reporting in __ext4_check_dir_entry so that the message is clearer and more understandable --- and avoids the division by zero trap if the size passed in is zero. (I'm not sure why we coded it that way in the first place; printing offset % size is actually more confusing and less useful.) https://bugzilla.kernel.org/show_bug.cgi?id=200933 Signed-off-by: Theodore Ts'o Reported-by: Wen Xu Cc: stable@vger.kernel.org --- fs/ext4/dir.c | 20 +++++++++----------- fs/ext4/inline.c | 4 +++- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index e2902d394f1b..f93f9881ec18 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -76,7 +76,7 @@ int __ext4_check_dir_entry(const char *function, unsigned int line, else if (unlikely(rlen < EXT4_DIR_REC_LEN(de->name_len))) error_msg = "rec_len is too small for name_len"; else if (unlikely(((char *) de - buf) + rlen > size)) - error_msg = "directory entry across range"; + error_msg = "directory entry overrun"; else if (unlikely(le32_to_cpu(de->inode) > le32_to_cpu(EXT4_SB(dir->i_sb)->s_es->s_inodes_count))) error_msg = "inode out of bounds"; @@ -85,18 +85,16 @@ int __ext4_check_dir_entry(const char *function, unsigned int line, if (filp) ext4_error_file(filp, function, line, bh->b_blocknr, - "bad entry in directory: %s - offset=%u(%u), " - "inode=%u, rec_len=%d, name_len=%d", - error_msg, (unsigned) (offset % size), - offset, le32_to_cpu(de->inode), - rlen, de->name_len); + "bad entry in directory: %s - offset=%u, " + "inode=%u, rec_len=%d, name_len=%d, size=%d", + error_msg, offset, le32_to_cpu(de->inode), + rlen, de->name_len, size); else ext4_error_inode(dir, function, line, bh->b_blocknr, - "bad entry in directory: %s - offset=%u(%u), " - "inode=%u, rec_len=%d, name_len=%d", - error_msg, (unsigned) (offset % size), - offset, le32_to_cpu(de->inode), - rlen, de->name_len); + "bad entry in directory: %s - offset=%u, " + "inode=%u, rec_len=%d, name_len=%d, size=%d", + error_msg, offset, le32_to_cpu(de->inode), + rlen, de->name_len, size); return 1; } diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 3543fe80a3c4..7b4736022761 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -1753,6 +1753,7 @@ bool empty_inline_dir(struct inode *dir, int *has_inline_data) { int err, inline_size; struct ext4_iloc iloc; + size_t inline_len; void *inline_pos; unsigned int offset; struct ext4_dir_entry_2 *de; @@ -1780,8 +1781,9 @@ bool empty_inline_dir(struct inode *dir, int *has_inline_data) goto out; } + inline_len = ext4_get_inline_size(dir); offset = EXT4_INLINE_DOTDOT_SIZE; - while (offset < dir->i_size) { + while (offset < inline_len) { de = ext4_get_inline_entry(dir, &iloc, offset, &inline_pos, &inline_size); if (ext4_check_dir_entry(dir, NULL, de, -- cgit v1.2.3-59-g8ed1b From 88bc243a3f22b9938c0b53c577dee28025cdb920 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 24 Aug 2018 14:49:41 +0200 Subject: selftests: android: move config up a level 'make kselftest-merge' assumes that the config files for the tests are located under the 'main' test dir, like tools/testing/selftests/android/ and not in a subdir to android. Signed-off-by: Anders Roxell Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/android/config | 5 +++++ tools/testing/selftests/android/ion/config | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/android/config delete mode 100644 tools/testing/selftests/android/ion/config diff --git a/tools/testing/selftests/android/config b/tools/testing/selftests/android/config new file mode 100644 index 000000000000..b4ad748a9dd9 --- /dev/null +++ b/tools/testing/selftests/android/config @@ -0,0 +1,5 @@ +CONFIG_ANDROID=y +CONFIG_STAGING=y +CONFIG_ION=y +CONFIG_ION_SYSTEM_HEAP=y +CONFIG_DRM_VGEM=y diff --git a/tools/testing/selftests/android/ion/config b/tools/testing/selftests/android/ion/config deleted file mode 100644 index b4ad748a9dd9..000000000000 --- a/tools/testing/selftests/android/ion/config +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_ANDROID=y -CONFIG_STAGING=y -CONFIG_ION=y -CONFIG_ION_SYSTEM_HEAP=y -CONFIG_DRM_VGEM=y -- cgit v1.2.3-59-g8ed1b From c31d02d1290e1e82a08015199e408228e152991f Mon Sep 17 00:00:00 2001 From: Thiago Jung Bauermann Date: Tue, 24 Jul 2018 23:57:25 -0300 Subject: selftests: kselftest: Remove outdated comment Commit 3c07aaef6598 ("selftests: kselftest: change KSFT_SKIP=4 instead of KSFT_PASS") reverted commit 11867a77eb85 ("selftests: kselftest framework: change skip exit code to 0") but missed removing the comment which that commit added, so do that now. Signed-off-by: Thiago Jung Bauermann Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/kselftest.h | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index 15e6b75fc3a5..a3edb2c8e43d 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -19,7 +19,6 @@ #define KSFT_FAIL 1 #define KSFT_XFAIL 2 #define KSFT_XPASS 3 -/* Treat skip as pass */ #define KSFT_SKIP 4 /* counters */ -- cgit v1.2.3-59-g8ed1b From ca917f9fe1a0fab3dde41bba4bbd173c5a3c5805 Mon Sep 17 00:00:00 2001 From: Ryan Lee Date: Thu, 23 Aug 2018 18:37:08 -0700 Subject: ASoC: max98373: Added 10ms sleep after amp software reset Signed-off-by: Ryan Lee Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index 2764fae69333..1093f766d0d2 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -730,6 +730,7 @@ static int max98373_probe(struct snd_soc_component *component) /* Software Reset */ regmap_write(max98373->regmap, MAX98373_R2000_SW_RESET, MAX98373_SOFT_RESET); + usleep_range(10000, 11000); /* IV default slot configuration */ regmap_write(max98373->regmap, @@ -818,6 +819,7 @@ static int max98373_resume(struct device *dev) regmap_write(max98373->regmap, MAX98373_R2000_SW_RESET, MAX98373_SOFT_RESET); + usleep_range(10000, 11000); regcache_cache_only(max98373->regmap, false); regcache_sync(max98373->regmap); return 0; -- cgit v1.2.3-59-g8ed1b From 7509487785d7a2bf3606cf26710f0ca29e9ca94d Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 24 Aug 2018 10:52:19 +0800 Subject: ASoC: rt5682: Change DAC/ADC volume scale The step of DAC/ADC volume scale changes from 0.375dB to 0.75dB Signed-off-by: Shuming Fan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/rt5682.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 640d400ca013..afe7d5b19313 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -750,8 +750,8 @@ static bool rt5682_readable_register(struct device *dev, unsigned int reg) } static const DECLARE_TLV_DB_SCALE(hp_vol_tlv, -2250, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ @@ -1114,7 +1114,7 @@ static const struct snd_kcontrol_new rt5682_snd_controls[] = { /* DAC Digital Volume */ SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5682_DAC1_DIG_VOL, - RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 86, 0, dac_vol_tlv), /* IN Boost Volume */ SOC_SINGLE_TLV("CBJ Boost Volume", RT5682_CBJ_BST_CTRL, @@ -1124,7 +1124,7 @@ static const struct snd_kcontrol_new rt5682_snd_controls[] = { SOC_DOUBLE("STO1 ADC Capture Switch", RT5682_STO1_ADC_DIG_VOL, RT5682_L_MUTE_SFT, RT5682_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("STO1 ADC Capture Volume", RT5682_STO1_ADC_DIG_VOL, - RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5682_L_VOL_SFT + 1, RT5682_R_VOL_SFT + 1, 63, 0, adc_vol_tlv), /* ADC Boost Volume Control */ SOC_DOUBLE_TLV("STO1 ADC Boost Gain Volume", RT5682_STO1_ADC_BOOST, -- cgit v1.2.3-59-g8ed1b From 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 22 Aug 2018 22:49:36 -0500 Subject: ASoC: wm8804: Add ACPI support HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier. This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform. The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays. Signed-off-by: Pierre-Louis Bossart Acked-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm8804-i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8804-i2c.c b/sound/soc/codecs/wm8804-i2c.c index f27464c2c5ba..79541960f45d 100644 --- a/sound/soc/codecs/wm8804-i2c.c +++ b/sound/soc/codecs/wm8804-i2c.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "wm8804.h" @@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id); +#if defined(CONFIG_OF) static const struct of_device_id wm8804_of_match[] = { { .compatible = "wlf,wm8804", }, { } }; MODULE_DEVICE_TABLE(of, wm8804_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wm8804_acpi_match[] = { + { "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */ + { "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */ + { }, +}; +MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match); +#endif static struct i2c_driver wm8804_i2c_driver = { .driver = { .name = "wm8804", .pm = &wm8804_pm, - .of_match_table = wm8804_of_match, + .of_match_table = of_match_ptr(wm8804_of_match), + .acpi_match_table = ACPI_PTR(wm8804_acpi_match), }, .probe = wm8804_i2c_probe, .remove = wm8804_i2c_remove, -- cgit v1.2.3-59-g8ed1b From 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a Mon Sep 17 00:00:00 2001 From: Danny Smith Date: Thu, 23 Aug 2018 10:26:20 +0200 Subject: ASoC: sigmadsp: safeload should not have lower byte limit Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit. Signed-off-by: Danny Smith Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/sigmadsp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/sigmadsp.c b/sound/soc/codecs/sigmadsp.c index d53680ac78e4..6df158669420 100644 --- a/sound/soc/codecs/sigmadsp.c +++ b/sound/soc/codecs/sigmadsp.c @@ -117,8 +117,7 @@ static int sigmadsp_ctrl_write(struct sigmadsp *sigmadsp, struct sigmadsp_control *ctrl, void *data) { /* safeload loads up to 20 bytes in a atomic operation */ - if (ctrl->num_bytes > 4 && ctrl->num_bytes <= 20 && sigmadsp->ops && - sigmadsp->ops->safeload) + if (ctrl->num_bytes <= 20 && sigmadsp->ops && sigmadsp->ops->safeload) return sigmadsp->ops->safeload(sigmadsp, ctrl->addr, data, ctrl->num_bytes); else -- cgit v1.2.3-59-g8ed1b From 04b2d03a75652bda989de1595048f0501dc0c0a0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 21 Aug 2018 11:53:03 +0200 Subject: spi: Fix double IDR allocation with DT aliases If the SPI bus number is provided by a DT alias, idr_alloc() is called twice, leading to: WARNING: CPU: 1 PID: 1 at drivers/spi/spi.c:2179 spi_register_controller+0x11c/0x5d8 couldn't get idr Fix this by moving the handling of fixed SPI bus numbers up, before the DT handling code fills in ctlr->bus_num. Fixes: 1a4327fbf4554d5b ("spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers") Signed-off-by: Geert Uytterhoeven Tested-by: Fabio Estevam Signed-off-by: Mark Brown --- drivers/spi/spi.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index a00d006d4c3a..9da0bc5a036c 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2143,8 +2143,17 @@ int spi_register_controller(struct spi_controller *ctlr) */ if (ctlr->num_chipselect == 0) return -EINVAL; - /* allocate dynamic bus number using Linux idr */ - if ((ctlr->bus_num < 0) && ctlr->dev.of_node) { + if (ctlr->bus_num >= 0) { + /* devices with a fixed bus num must check-in with the num */ + mutex_lock(&board_lock); + id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num, + ctlr->bus_num + 1, GFP_KERNEL); + mutex_unlock(&board_lock); + if (WARN(id < 0, "couldn't get idr")) + return id == -ENOSPC ? -EBUSY : id; + ctlr->bus_num = id; + } else if (ctlr->dev.of_node) { + /* allocate dynamic bus number using Linux idr */ id = of_alias_get_id(ctlr->dev.of_node, "spi"); if (id >= 0) { ctlr->bus_num = id; @@ -2170,15 +2179,6 @@ int spi_register_controller(struct spi_controller *ctlr) if (WARN(id < 0, "couldn't get idr")) return id; ctlr->bus_num = id; - } else { - /* devices with a fixed bus num must check-in with the num */ - mutex_lock(&board_lock); - id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num, - ctlr->bus_num + 1, GFP_KERNEL); - mutex_unlock(&board_lock); - if (WARN(id < 0, "couldn't get idr")) - return id == -ENOSPC ? -EBUSY : id; - ctlr->bus_num = id; } INIT_LIST_HEAD(&ctlr->queue); spin_lock_init(&ctlr->queue_lock); -- cgit v1.2.3-59-g8ed1b From 5223c9c1cbfc0cd4d0a1b50758e0949af3290fa1 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Sat, 18 Aug 2018 01:51:58 +0200 Subject: spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE This patch fixes the dspi_eoq_write function used by the ColdFire mcf5441x family. The 16 bit cmd part must be re-set at each data transfer. Also, now that fifo_size variables are used for eoq_read/write, a proper fifo size must be set (16 slots for the ColdFire dspi module version). Signed-off-by: Angelo Dureghello Acked-by: Esben Haabendal Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-fsl-dspi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 7cb3ab0a35a0..3082e72e4f6c 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -30,7 +30,11 @@ #define DRIVER_NAME "fsl-dspi" +#ifdef CONFIG_M5441x +#define DSPI_FIFO_SIZE 16 +#else #define DSPI_FIFO_SIZE 4 +#endif #define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024) #define SPI_MCR 0x00 @@ -623,9 +627,11 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi) static void dspi_eoq_write(struct fsl_dspi *dspi) { int fifo_size = DSPI_FIFO_SIZE; + u16 xfer_cmd = dspi->tx_cmd; /* Fill TX FIFO with as many transfers as possible */ while (dspi->len && fifo_size--) { + dspi->tx_cmd = xfer_cmd; /* Request EOQF for last transfer in FIFO */ if (dspi->len == dspi->bytes_per_word || fifo_size == 0) dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ; -- cgit v1.2.3-59-g8ed1b From 823f18f8b860526fc099c222619a126d57d2ad8c Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Wed, 29 Aug 2018 15:36:10 +0300 Subject: regulator: bd71837: Disable voltage monitoring for LDO3/4 There is a HW quirk in BD71837. The shutdown sequence timings for bucks/LDOs which are enabled via register interface are changed. At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the beginning of shut-down sequence. This causes LDO5/6 voltage monitoring to detect under voltage and force PMIC to emergency state instead of poweroff. Disable voltage monitoring for LDO5 and LDO6 at probe to avoid this. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/bd71837-regulator.c | 19 +++++++++++++++++++ include/linux/mfd/rohm-bd718x7.h | 33 ++++++++++++++++++++++++++++++--- 2 files changed, 49 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c index 0f8ac8dec3e1..a1bd8aaf4d98 100644 --- a/drivers/regulator/bd71837-regulator.c +++ b/drivers/regulator/bd71837-regulator.c @@ -569,6 +569,25 @@ static int bd71837_probe(struct platform_device *pdev) BD71837_REG_REGLOCK); } + /* + * There is a HW quirk in BD71837. The shutdown sequence timings for + * bucks/LDOs which are controlled via register interface are changed. + * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the + * beginning of shut-down sequence. As bucks 6 and 7 are parent + * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage + * monitoring to errorneously detect under voltage and force PMIC to + * emergency state instead of poweroff. In order to avoid this we + * disable voltage monitoring for LDO5 and LDO6 + */ + err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80, + BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80); + if (err) { + dev_err(&pmic->pdev->dev, + "Failed to disable voltage monitoring\n"); + goto err; + } + for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) { struct regulator_desc *desc; diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index a528747f8aed..e8338e5dc10b 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -78,9 +78,9 @@ enum { BD71837_REG_TRANS_COND0 = 0x1F, BD71837_REG_TRANS_COND1 = 0x20, BD71837_REG_VRFAULTEN = 0x21, - BD71837_REG_MVRFLTMASK0 = 0x22, - BD71837_REG_MVRFLTMASK1 = 0x23, - BD71837_REG_MVRFLTMASK2 = 0x24, + BD718XX_REG_MVRFLTMASK0 = 0x22, + BD718XX_REG_MVRFLTMASK1 = 0x23, + BD718XX_REG_MVRFLTMASK2 = 0x24, BD71837_REG_RCVCFG = 0x25, BD71837_REG_RCVNUM = 0x26, BD71837_REG_PWRONCONFIG0 = 0x27, @@ -159,6 +159,33 @@ enum { #define BUCK8_MASK 0x3F #define BUCK8_DEFAULT 0x1E +/* BD718XX Voltage monitoring masks */ +#define BD718XX_BUCK1_VRMON80 0x1 +#define BD718XX_BUCK1_VRMON130 0x2 +#define BD718XX_BUCK2_VRMON80 0x4 +#define BD718XX_BUCK2_VRMON130 0x8 +#define BD718XX_1ST_NODVS_BUCK_VRMON80 0x1 +#define BD718XX_1ST_NODVS_BUCK_VRMON130 0x2 +#define BD718XX_2ND_NODVS_BUCK_VRMON80 0x4 +#define BD718XX_2ND_NODVS_BUCK_VRMON130 0x8 +#define BD718XX_3RD_NODVS_BUCK_VRMON80 0x10 +#define BD718XX_3RD_NODVS_BUCK_VRMON130 0x20 +#define BD718XX_4TH_NODVS_BUCK_VRMON80 0x40 +#define BD718XX_4TH_NODVS_BUCK_VRMON130 0x80 +#define BD718XX_LDO1_VRMON80 0x1 +#define BD718XX_LDO2_VRMON80 0x2 +#define BD718XX_LDO3_VRMON80 0x4 +#define BD718XX_LDO4_VRMON80 0x8 +#define BD718XX_LDO5_VRMON80 0x10 +#define BD718XX_LDO6_VRMON80 0x20 + +/* BD71837 specific voltage monitoring masks */ +#define BD71837_BUCK3_VRMON80 0x10 +#define BD71837_BUCK3_VRMON130 0x20 +#define BD71837_BUCK4_VRMON80 0x40 +#define BD71837_BUCK4_VRMON130 0x80 +#define BD71837_LDO7_VRMON80 0x40 + /* BD71837_REG_IRQ bits */ #define IRQ_SWRST 0x40 #define IRQ_PWRON_S 0x20 -- cgit v1.2.3-59-g8ed1b From 4fbf51ee6e822ac28be28ff25883745131e8c4a3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 23 Aug 2018 09:55:43 -0400 Subject: media: video_function_calls.rst: drop obsolete video-set-attributes reference This fixes this warning: Documentation/media/uapi/dvb/video_function_calls.rst:9: WARNING: toctree contains reference to nonexisting document 'uapi/dvb/video-set-attributes' Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/media/uapi/dvb/video_function_calls.rst | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst index 3f4f6c9ffad7..a4222b6cd2d3 100644 --- a/Documentation/media/uapi/dvb/video_function_calls.rst +++ b/Documentation/media/uapi/dvb/video_function_calls.rst @@ -33,4 +33,3 @@ Video Function Calls video-clear-buffer video-set-streamtype video-set-format - video-set-attributes -- cgit v1.2.3-59-g8ed1b From 312f73b648626a0526a3aceebb0a3192aaba05ce Mon Sep 17 00:00:00 2001 From: Jozef Balga Date: Tue, 21 Aug 2018 05:01:04 -0400 Subject: media: af9035: prevent buffer overflow on write When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead. Fixes bugzilla issue 64871 [mchehab+samsung@kernel.org: fix a merge conflict and changed the condition to match the patch's comment, e. g. len == 3 could also be valid] Signed-off-by: Jozef Balga Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb-v2/af9035.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c index 666d319d3d1a..1f6c1eefe389 100644 --- a/drivers/media/usb/dvb-usb-v2/af9035.c +++ b/drivers/media/usb/dvb-usb-v2/af9035.c @@ -402,8 +402,10 @@ static int af9035_i2c_master_xfer(struct i2c_adapter *adap, if (msg[0].addr == state->af9033_i2c_addr[1]) reg |= 0x100000; - ret = af9035_wr_regs(d, reg, &msg[0].buf[3], - msg[0].len - 3); + ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg, + &msg[0].buf[3], + msg[0].len - 3) + : -EOPNOTSUPP; } else { /* I2C write */ u8 buf[MAX_XFER_SIZE]; -- cgit v1.2.3-59-g8ed1b From 44a9ffd4eb99ada6c1496a735a414414fef30696 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Aug 2018 05:53:42 -0400 Subject: media: camss: mark PM functions as __maybe_unused The empty suspend/resume functions cause a build warning when they are unused: drivers/media/platform/qcom/camss/camss.c:1001:12: error: 'camss_runtime_resume' defined but not used [-Werror=unused-function] drivers/media/platform/qcom/camss/camss.c:996:12: error: 'camss_runtime_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them. Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support") Signed-off-by: Arnd Bergmann Acked-by: Todor Tomov Acked-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/camss/camss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c index dcc0c30ef1b1..9f19d5f5966b 100644 --- a/drivers/media/platform/qcom/camss/camss.c +++ b/drivers/media/platform/qcom/camss/camss.c @@ -993,12 +993,12 @@ static const struct of_device_id camss_dt_match[] = { MODULE_DEVICE_TABLE(of, camss_dt_match); -static int camss_runtime_suspend(struct device *dev) +static int __maybe_unused camss_runtime_suspend(struct device *dev) { return 0; } -static int camss_runtime_resume(struct device *dev) +static int __maybe_unused camss_runtime_resume(struct device *dev) { return 0; } -- cgit v1.2.3-59-g8ed1b From 55b518998996cc935d294bbf1f07ddba58b8b89e Mon Sep 17 00:00:00 2001 From: Todor Tomov Date: Tue, 14 Aug 2018 11:57:35 -0400 Subject: media: camss: Use managed memory allocations Use managed memory allocations for structs which are used until the driver is removed. Signed-off-by: Todor Tomov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/camss/camss-ispif.c | 4 ++-- drivers/media/platform/qcom/camss/camss.c | 11 ++++++----- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c index 7f269021d08c..ca7b0917500d 100644 --- a/drivers/media/platform/qcom/camss/camss-ispif.c +++ b/drivers/media/platform/qcom/camss/camss-ispif.c @@ -1076,8 +1076,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif, else return -EINVAL; - ispif->line = kcalloc(ispif->line_num, sizeof(*ispif->line), - GFP_KERNEL); + ispif->line = devm_kcalloc(dev, ispif->line_num, sizeof(*ispif->line), + GFP_KERNEL); if (!ispif->line) return -ENOMEM; diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c index 9f19d5f5966b..669615fff6a0 100644 --- a/drivers/media/platform/qcom/camss/camss.c +++ b/drivers/media/platform/qcom/camss/camss.c @@ -848,17 +848,18 @@ static int camss_probe(struct platform_device *pdev) return -EINVAL; } - camss->csiphy = kcalloc(camss->csiphy_num, sizeof(*camss->csiphy), - GFP_KERNEL); + camss->csiphy = devm_kcalloc(dev, camss->csiphy_num, + sizeof(*camss->csiphy), GFP_KERNEL); if (!camss->csiphy) return -ENOMEM; - camss->csid = kcalloc(camss->csid_num, sizeof(*camss->csid), - GFP_KERNEL); + camss->csid = devm_kcalloc(dev, camss->csid_num, sizeof(*camss->csid), + GFP_KERNEL); if (!camss->csid) return -ENOMEM; - camss->vfe = kcalloc(camss->vfe_num, sizeof(*camss->vfe), GFP_KERNEL); + camss->vfe = devm_kcalloc(dev, camss->vfe_num, sizeof(*camss->vfe), + GFP_KERNEL); if (!camss->vfe) return -ENOMEM; -- cgit v1.2.3-59-g8ed1b From 3799eca51c5be3cd76047a582ac52087373b54b3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2018 06:27:28 -0400 Subject: media: camss: add missing includes Multiple files in this driver fail to build because of missing header inclusions: drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c: In function 'csiphy_hw_version_read': drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c:31:18: error: implicit declaration of function 'readl_relaxed'; did you mean 'xchg_relaxed'? [-Werror=implicit-function-declaration] drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c: In function 'csiphy_hw_version_read': drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:52:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration] Add linux/io.h there and in all other files that call readl/writel and related interfaces. Signed-off-by: Arnd Bergmann Signed-off-by: Todor Tomov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/qcom/camss/camss-csid.c | 1 + drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c | 1 + drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c | 1 + drivers/media/platform/qcom/camss/camss-csiphy.c | 1 + drivers/media/platform/qcom/camss/camss-ispif.c | 1 + drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 1 + drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 1 + 7 files changed, 7 insertions(+) diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c index 729b31891466..a5ae85674ffb 100644 --- a/drivers/media/platform/qcom/camss/camss-csid.c +++ b/drivers/media/platform/qcom/camss/camss-csid.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c index c832539397d7..12bce391d71f 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c +++ b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c @@ -12,6 +12,7 @@ #include #include +#include #define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n)) #define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n)) diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c index bcd0dfd33618..2e65caf1ecae 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c @@ -12,6 +12,7 @@ #include #include +#include #define CSIPHY_3PH_LNn_CFG1(n) (0x000 + 0x100 * (n)) #define CSIPHY_3PH_LNn_CFG1_SWI_REC_DLY_PRG (BIT(7) | BIT(6)) diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c index 4559f3b1b38c..008afb85023b 100644 --- a/drivers/media/platform/qcom/camss/camss-csiphy.c +++ b/drivers/media/platform/qcom/camss/camss-csiphy.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c index ca7b0917500d..1f33b4eb198c 100644 --- a/drivers/media/platform/qcom/camss/camss-ispif.c +++ b/drivers/media/platform/qcom/camss/camss-ispif.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c index da3a9fed9f2d..174a36be6f5d 100644 --- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c @@ -9,6 +9,7 @@ */ #include +#include #include #include "camss-vfe.h" diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c index 4c584bffd179..0dca8bf9281e 100644 --- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c +++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c @@ -9,6 +9,7 @@ */ #include +#include #include #include "camss-vfe.h" -- cgit v1.2.3-59-g8ed1b From ef394f3fbecbe61d69450ad8cf0fa8f713c8ce8f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 31 Aug 2018 14:34:02 +0200 Subject: regulator: da9063: fix DT probing with constraints Commit 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") reordered the da9063_regulator_info[] array, but not the DA9063_ID_* regulator ids and not the da9063_matches[] array, because ids are used as indices in the array initializer. This mismatch between regulator id and da9063_regulator_info[] array index causes the driver probe to fail because constraints from DT are not applied to the correct regulator: da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50) DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22) This patch reorders the DA9063_ID_* as apparently intended, and with them the entries in the da90630_matches[] array. Fixes: 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") Signed-off-by: Philipp Zabel Reviewed-by: Geert Uytterhoeven Reviewed-by: Marek Vasut Signed-off-by: Mark Brown --- include/linux/mfd/da9063/pdata.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h index 8a125701ef7b..50bed4f89c1a 100644 --- a/include/linux/mfd/da9063/pdata.h +++ b/include/linux/mfd/da9063/pdata.h @@ -21,7 +21,7 @@ /* * Regulator configuration */ -/* DA9063 regulator IDs */ +/* DA9063 and DA9063L regulator IDs */ enum { /* BUCKs */ DA9063_ID_BCORE1, @@ -37,18 +37,20 @@ enum { DA9063_ID_BMEM_BIO_MERGED, /* When two BUCKs are merged, they cannot be reused separately */ - /* LDOs */ + /* LDOs on both DA9063 and DA9063L */ + DA9063_ID_LDO3, + DA9063_ID_LDO7, + DA9063_ID_LDO8, + DA9063_ID_LDO9, + DA9063_ID_LDO11, + + /* DA9063-only LDOs */ DA9063_ID_LDO1, DA9063_ID_LDO2, - DA9063_ID_LDO3, DA9063_ID_LDO4, DA9063_ID_LDO5, DA9063_ID_LDO6, - DA9063_ID_LDO7, - DA9063_ID_LDO8, - DA9063_ID_LDO9, DA9063_ID_LDO10, - DA9063_ID_LDO11, }; /* Regulators platform data */ -- cgit v1.2.3-59-g8ed1b From d40e3e9e44db4b3c8777f3b515ba6097ba26e3b2 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Fri, 31 Aug 2018 10:14:05 -0500 Subject: ASoC: tas6424: Save last fault register even when clear When there is no fault bit set in a fault register we skip the fault reporting section for that register. This also skips over saving that registers value. We save the value so we will not double report an error, but if an error clears then returns we will also not report it as we did not save the all cleared register value. Fix this by saving the fault register value in the all clear path. Signed-off-by: Andrew F. Davis Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/tas6424.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/tas6424.c b/sound/soc/codecs/tas6424.c index 14999b999fd3..0d6145549a98 100644 --- a/sound/soc/codecs/tas6424.c +++ b/sound/soc/codecs/tas6424.c @@ -424,8 +424,10 @@ static void tas6424_fault_check_work(struct work_struct *work) TAS6424_FAULT_PVDD_UV | TAS6424_FAULT_VBAT_UV; - if (reg) + if (!reg) { + tas6424->last_fault1 = reg; goto check_global_fault2_reg; + } /* * Only flag errors once for a given occurrence. This is needed as @@ -461,8 +463,10 @@ check_global_fault2_reg: TAS6424_FAULT_OTSD_CH3 | TAS6424_FAULT_OTSD_CH4; - if (!reg) + if (!reg) { + tas6424->last_fault2 = reg; goto check_warn_reg; + } if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) dev_crit(dev, "experienced a global overtemp shutdown\n"); @@ -497,8 +501,10 @@ check_warn_reg: TAS6424_WARN_VDD_OTW_CH3 | TAS6424_WARN_VDD_OTW_CH4; - if (!reg) + if (!reg) { + tas6424->last_warn = reg; goto out; + } if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) dev_warn(dev, "experienced a VDD under voltage condition\n"); -- cgit v1.2.3-59-g8ed1b From bcd8e91f98c156f4b1ebcfacae675f9cfd962441 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 1 Sep 2018 12:45:04 -0400 Subject: ext4: avoid arithemetic overflow that can trigger a BUG A maliciously crafted file system can cause an overflow when the results of a 64-bit calculation is stored into a 32-bit length parameter. https://bugzilla.kernel.org/show_bug.cgi?id=200623 Signed-off-by: Theodore Ts'o Reported-by: Wen Xu Cc: stable@vger.kernel.org --- fs/ext4/ext4.h | 3 +++ fs/ext4/inode.c | 8 ++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 249bcee4d7b2..ac05bd86643a 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -686,6 +686,9 @@ enum { /* Max physical block we can address w/o extents */ #define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF +/* Max logical block we can support */ +#define EXT4_MAX_LOGICAL_BLOCK 0xFFFFFFFF + /* * Structure of an inode on the disk */ diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 8f6ad7667974..694f31364206 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3412,12 +3412,16 @@ static int ext4_iomap_begin(struct inode *inode, loff_t offset, loff_t length, { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); unsigned int blkbits = inode->i_blkbits; - unsigned long first_block = offset >> blkbits; - unsigned long last_block = (offset + length - 1) >> blkbits; + unsigned long first_block, last_block; struct ext4_map_blocks map; bool delalloc = false; int ret; + if ((offset >> blkbits) > EXT4_MAX_LOGICAL_BLOCK) + return -EINVAL; + first_block = offset >> blkbits; + last_block = min_t(loff_t, (offset + length - 1) >> blkbits, + EXT4_MAX_LOGICAL_BLOCK); if (flags & IOMAP_REPORT) { if (ext4_has_inline_data(inode)) { -- cgit v1.2.3-59-g8ed1b From 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 1 Sep 2018 14:42:14 -0400 Subject: ext4: recalucate superblock checksum after updating free blocks/inodes When mounting the superblock, ext4_fill_super() calculates the free blocks and free inodes and stores them in the superblock. It's not strictly necessary, since we don't use them any more, but it's nice to keep them roughly aligned to reality. Since it's not critical for file system correctness, the code doesn't call ext4_commit_super(). The problem is that it's in ext4_commit_super() that we recalculate the superblock checksum. So if we're not going to call ext4_commit_super(), we need to call ext4_superblock_csum_set() to make sure the superblock checksum is consistent. Most of the time, this doesn't matter, since we end up calling ext4_commit_super() very soon thereafter, and definitely by the time the file system is unmounted. However, it doesn't work in this sequence: mke2fs -Fq -t ext4 /dev/vdc 128M mount /dev/vdc /vdc cp xfstests/git-versions /vdc godown /vdc umount /vdc mount /dev/vdc tune2fs -l /dev/vdc With this commit, the "tune2fs -l" no longer fails. Reported-by: Chengguang Xu Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f7750bc5b85a..e41da553b430 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4378,11 +4378,13 @@ no_journal: block = ext4_count_free_clusters(sb); ext4_free_blocks_count_set(sbi->s_es, EXT4_C2B(sbi, block)); + ext4_superblock_csum_set(sb); err = percpu_counter_init(&sbi->s_freeclusters_counter, block, GFP_KERNEL); if (!err) { unsigned long freei = ext4_count_free_inodes(sb); sbi->s_es->s_free_inodes_count = cpu_to_le32(freei); + ext4_superblock_csum_set(sb); err = percpu_counter_init(&sbi->s_freeinodes_counter, freei, GFP_KERNEL); } -- cgit v1.2.3-59-g8ed1b From 7aa09ff24301535491cd4de1b93107ee91449a12 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 3 Sep 2018 12:07:47 +0100 Subject: ASoC: q6routing: initialize data correctly Some of the router data fields are left as default zeros which are valid dai ids, so initialize these to invalid value of -1. Without intializing these correctly get_session_from_id() can return incorrect session resulting in not closing the opened copp and messing up with the copp ref count. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index dc94c5c53788..c6b51571be94 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -960,8 +960,10 @@ static int msm_routing_probe(struct snd_soc_component *c) { int i; - for (i = 0; i < MAX_SESSIONS; i++) + for (i = 0; i < MAX_SESSIONS; i++) { routing_data->sessions[i].port_id = -1; + routing_data->sessions[i].fedai_id = -1; + } return 0; } -- cgit v1.2.3-59-g8ed1b From 7001cab1dabc0b72b2b672ef58a90ab64f5e2343 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Wed, 29 Aug 2018 08:47:57 +0200 Subject: spi: tegra20-slink: explicitly enable/disable clock Depending on the SPI instance one may get an interrupt storm upon requesting resp. interrupt unless the clock is explicitly enabled beforehand. This has been observed trying to bring up instance 4 on T20. Signed-off-by: Marcel Ziswiler Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-tegra20-slink.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c index 6f7b946b5ced..1427f343b39a 100644 --- a/drivers/spi/spi-tegra20-slink.c +++ b/drivers/spi/spi-tegra20-slink.c @@ -1063,6 +1063,24 @@ static int tegra_slink_probe(struct platform_device *pdev) goto exit_free_master; } + /* disabled clock may cause interrupt storm upon request */ + tspi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(tspi->clk)) { + ret = PTR_ERR(tspi->clk); + dev_err(&pdev->dev, "Can not get clock %d\n", ret); + goto exit_free_master; + } + ret = clk_prepare(tspi->clk); + if (ret < 0) { + dev_err(&pdev->dev, "Clock prepare failed %d\n", ret); + goto exit_free_master; + } + ret = clk_enable(tspi->clk); + if (ret < 0) { + dev_err(&pdev->dev, "Clock enable failed %d\n", ret); + goto exit_free_master; + } + spi_irq = platform_get_irq(pdev, 0); tspi->irq = spi_irq; ret = request_threaded_irq(tspi->irq, tegra_slink_isr, @@ -1071,14 +1089,7 @@ static int tegra_slink_probe(struct platform_device *pdev) if (ret < 0) { dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n", tspi->irq); - goto exit_free_master; - } - - tspi->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(tspi->clk)) { - dev_err(&pdev->dev, "can not get clock\n"); - ret = PTR_ERR(tspi->clk); - goto exit_free_irq; + goto exit_clk_disable; } tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi"); @@ -1138,6 +1149,8 @@ exit_rx_dma_free: tegra_slink_deinit_dma_param(tspi, true); exit_free_irq: free_irq(spi_irq, tspi); +exit_clk_disable: + clk_disable(tspi->clk); exit_free_master: spi_master_put(master); return ret; @@ -1150,6 +1163,8 @@ static int tegra_slink_remove(struct platform_device *pdev) free_irq(tspi->irq, tspi); + clk_disable(tspi->clk); + if (tspi->tx_dma_chan) tegra_slink_deinit_dma_param(tspi, false); -- cgit v1.2.3-59-g8ed1b From 4d230d12710646788af581ba0155d83ab48b955c Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Mon, 3 Sep 2018 07:08:58 +0000 Subject: ASoC: rsnd: fixup not to call clk_get/set under non-atomic Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [] dump_backtrace+0x0/0x37c [] show_stack+0x14/0x1c [] dump_stack+0xfc/0x154 [] ___might_sleep+0x57c/0x58c [] __might_sleep+0x208/0x21c [] mutex_lock_nested+0xb4/0x6f0 [] clk_prepare_lock+0xb0/0x184 [] clk_core_get_rate+0x14/0x54 [] clk_get_rate+0x20/0x34 [] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang Signed-off-by: Timo Wischer [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/sh/rcar/core.c | 11 +++++++++++ sound/soc/sh/rcar/rsnd.h | 7 +++++++ sound/soc/sh/rcar/ssi.c | 16 ++++++++++------ 3 files changed, 28 insertions(+), 6 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index f8425d8b44d2..b35f5509cfe2 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -958,12 +958,23 @@ static void rsnd_soc_dai_shutdown(struct snd_pcm_substream *substream, rsnd_dai_stream_quit(io); } +static int rsnd_soc_dai_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct rsnd_priv *priv = rsnd_dai_to_priv(dai); + struct rsnd_dai *rdai = rsnd_dai_to_rdai(dai); + struct rsnd_dai_stream *io = rsnd_rdai_to_io(rdai, substream); + + return rsnd_dai_call(prepare, io, priv); +} + static const struct snd_soc_dai_ops rsnd_soc_dai_ops = { .startup = rsnd_soc_dai_startup, .shutdown = rsnd_soc_dai_shutdown, .trigger = rsnd_soc_dai_trigger, .set_fmt = rsnd_soc_dai_set_fmt, .set_tdm_slot = rsnd_soc_set_dai_tdm_slot, + .prepare = rsnd_soc_dai_prepare, }; void rsnd_parse_connect_common(struct rsnd_dai *rdai, diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index 96d93330b1e1..8f7a0abfa751 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -280,6 +280,9 @@ struct rsnd_mod_ops { int (*nolock_stop)(struct rsnd_mod *mod, struct rsnd_dai_stream *io, struct rsnd_priv *priv); + int (*prepare)(struct rsnd_mod *mod, + struct rsnd_dai_stream *io, + struct rsnd_priv *priv); }; struct rsnd_dai_stream; @@ -309,6 +312,7 @@ struct rsnd_mod { * H 0: fallback * H 0: hw_params * H 0: pointer + * H 0: prepare */ #define __rsnd_mod_shift_nolock_start 0 #define __rsnd_mod_shift_nolock_stop 0 @@ -323,6 +327,7 @@ struct rsnd_mod { #define __rsnd_mod_shift_fallback 28 /* always called */ #define __rsnd_mod_shift_hw_params 28 /* always called */ #define __rsnd_mod_shift_pointer 28 /* always called */ +#define __rsnd_mod_shift_prepare 28 /* always called */ #define __rsnd_mod_add_probe 0 #define __rsnd_mod_add_remove 0 @@ -337,6 +342,7 @@ struct rsnd_mod { #define __rsnd_mod_add_fallback 0 #define __rsnd_mod_add_hw_params 0 #define __rsnd_mod_add_pointer 0 +#define __rsnd_mod_add_prepare 0 #define __rsnd_mod_call_probe 0 #define __rsnd_mod_call_remove 0 @@ -351,6 +357,7 @@ struct rsnd_mod { #define __rsnd_mod_call_pointer 0 #define __rsnd_mod_call_nolock_start 0 #define __rsnd_mod_call_nolock_stop 1 +#define __rsnd_mod_call_prepare 0 #define rsnd_mod_to_priv(mod) ((mod)->priv) #define rsnd_mod_name(mod) ((mod)->ops->name) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 8304e4ec9242..3f880ec66459 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -283,7 +283,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, if (rsnd_ssi_is_multi_slave(mod, io)) return 0; - if (ssi->usrcnt > 1) { + if (ssi->rate) { if (ssi->rate != rate) { dev_err(dev, "SSI parent/child should use same rate\n"); return -EINVAL; @@ -434,7 +434,6 @@ static int rsnd_ssi_init(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); - int ret; if (!rsnd_ssi_is_run_mods(mod, io)) return 0; @@ -443,10 +442,6 @@ static int rsnd_ssi_init(struct rsnd_mod *mod, rsnd_mod_power_on(mod); - ret = rsnd_ssi_master_clk_start(mod, io); - if (ret < 0) - return ret; - rsnd_ssi_config_init(mod, io); rsnd_ssi_register_setup(mod); @@ -852,6 +847,13 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod, return 0; } +static int rsnd_ssi_prepare(struct rsnd_mod *mod, + struct rsnd_dai_stream *io, + struct rsnd_priv *priv) +{ + return rsnd_ssi_master_clk_start(mod, io); +} + static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .name = SSI_NAME, .probe = rsnd_ssi_common_probe, @@ -864,6 +866,7 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = { .pointer = rsnd_ssi_pio_pointer, .pcm_new = rsnd_ssi_pcm_new, .hw_params = rsnd_ssi_hw_params, + .prepare = rsnd_ssi_prepare, }; static int rsnd_ssi_dma_probe(struct rsnd_mod *mod, @@ -940,6 +943,7 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = { .pcm_new = rsnd_ssi_pcm_new, .fallback = rsnd_ssi_fallback, .hw_params = rsnd_ssi_hw_params, + .prepare = rsnd_ssi_prepare, }; int rsnd_ssi_is_dma_mode(struct rsnd_mod *mod) -- cgit v1.2.3-59-g8ed1b From 3edd79cf5a44b12dbb13bc320f5788aed6562b36 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 3 Sep 2018 16:49:37 +0200 Subject: regulator: Fix 'do-nothing' value for regulators without suspend state Some regulators don't have all states defined and in such cases regulator core should not assume anything. However in current implementation of of_get_regulation_constraints() DO_NOTHING_IN_SUSPEND enable value was set only for regulators which had suspend node defined, otherwise the default 0 value was used, what means DISABLE_IN_SUSPEND. This lead to broken system suspend/resume on boards, which had simple regulator constraints definition (without suspend state nodes). To avoid further mismatches between the default and uninitialized values of the suspend enabled/disabled states, change the values of the them, so default '0' means DO_NOTHING_IN_SUSPEND. Fixes: 72069f9957a1: regulator: leave one item to record whether regulator is enabled Signed-off-by: Marek Szyprowski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/core.c | 2 +- drivers/regulator/of_regulator.c | 2 -- include/linux/regulator/machine.h | 6 +++--- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index bb1324f93143..90215f57270f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3161,7 +3161,7 @@ static inline int regulator_suspend_toggle(struct regulator_dev *rdev, if (!rstate->changeable) return -EPERM; - rstate->enabled = en; + rstate->enabled = (en) ? ENABLE_IN_SUSPEND : DISABLE_IN_SUSPEND; return 0; } diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 638f17d4c848..210fc20f7de7 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -213,8 +213,6 @@ static void of_get_regulation_constraints(struct device_node *np, else if (of_property_read_bool(suspend_np, "regulator-off-in-suspend")) suspend_state->enabled = DISABLE_IN_SUSPEND; - else - suspend_state->enabled = DO_NOTHING_IN_SUSPEND; if (!of_property_read_u32(np, "regulator-suspend-min-microvolt", &pval)) diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 3468703d663a..a459a5e973a7 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -48,9 +48,9 @@ struct regulator; * DISABLE_IN_SUSPEND - turn off regulator in suspend states * ENABLE_IN_SUSPEND - keep regulator on in suspend states */ -#define DO_NOTHING_IN_SUSPEND (-1) -#define DISABLE_IN_SUSPEND 0 -#define ENABLE_IN_SUSPEND 1 +#define DO_NOTHING_IN_SUSPEND 0 +#define DISABLE_IN_SUSPEND 1 +#define ENABLE_IN_SUSPEND 2 /* Regulator active discharge flags */ enum regulator_active_discharge { -- cgit v1.2.3-59-g8ed1b From f0a459dec5495a3580f8d784555e6f8f3bf7f263 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 3 Sep 2018 22:19:43 -0400 Subject: ext4: fix online resize's handling of a too-small final block group Avoid growing the file system to an extent so that the last block group is too small to hold all of the metadata that must be stored in the block group. This problem can be triggered with the following reproducer: umount /mnt mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \ -E resize=1073741824 /tmp/foo.img 128M mount /tmp/foo.img /mnt truncate --size 1708M /tmp/foo.img resize2fs /dev/loop0 295400 umount /mnt e2fsck -fy /tmp/foo.img Reported-by: Torsten Hilbrich Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/resize.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index e5fb38451a73..33655a6eff4d 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1986,6 +1986,26 @@ retry: } } + /* + * Make sure the last group has enough space so that it's + * guaranteed to have enough space for all metadata blocks + * that it might need to hold. (We might not need to store + * the inode table blocks in the last block group, but there + * will be cases where this might be needed.) + */ + if ((ext4_group_first_block_no(sb, n_group) + + ext4_group_overhead_blocks(sb, n_group) + 2 + + sbi->s_itb_per_group + sbi->s_cluster_ratio) >= n_blocks_count) { + n_blocks_count = ext4_group_first_block_no(sb, n_group); + n_group--; + n_blocks_count_retry = 0; + if (resize_inode) { + iput(resize_inode); + resize_inode = NULL; + } + goto retry; + } + /* extend the last group */ if (n_group == o_group) add = n_blocks_count - o_blocks_count; -- cgit v1.2.3-59-g8ed1b From 5f8c10936fab2b69a487400f2872902e597dd320 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 3 Sep 2018 22:25:01 -0400 Subject: ext4: fix online resizing for bigalloc file systems with a 1k block size An online resize of a file system with the bigalloc feature enabled and a 1k block size would be refused since ext4_resize_begin() did not understand s_first_data_block is 0 for all bigalloc file systems, even when the block size is 1k. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/resize.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 33655a6eff4d..ebbc663d0798 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -19,6 +19,7 @@ int ext4_resize_begin(struct super_block *sb) { + struct ext4_sb_info *sbi = EXT4_SB(sb); int ret = 0; if (!capable(CAP_SYS_RESOURCE)) @@ -29,7 +30,7 @@ int ext4_resize_begin(struct super_block *sb) * because the user tools have no way of handling this. Probably a * bad time to do it anyways. */ - if (EXT4_SB(sb)->s_sbh->b_blocknr != + if (EXT4_B2C(sbi, sbi->s_sbh->b_blocknr) != le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) { ext4_warning(sb, "won't resize using backup superblock at %llu", (unsigned long long)EXT4_SB(sb)->s_sbh->b_blocknr); -- cgit v1.2.3-59-g8ed1b From 1723c3155f117ee6e00f28fadf6e9eda4fc85806 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 4 Sep 2018 15:39:30 +0200 Subject: spi: gpio: Fix copy-and-paste error This fixes an embarrassing copy-and-paste error in the errorpath of spi_gpio_request(): we were checking the wrong struct member for error code right after retrieveing the sck GPIO. Fixes: 9b00bc7b901ff672 ("spi: spi-gpio: Rewrite to use GPIO descriptors") Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Walleij Signed-off-by: Mark Brown --- drivers/spi/spi-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index 0626e6e3ea0c..421bfc7dda67 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -300,8 +300,8 @@ static int spi_gpio_request(struct device *dev, *mflags |= SPI_MASTER_NO_RX; spi_gpio->sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW); - if (IS_ERR(spi_gpio->mosi)) - return PTR_ERR(spi_gpio->mosi); + if (IS_ERR(spi_gpio->sck)) + return PTR_ERR(spi_gpio->sck); for (i = 0; i < num_chipselects; i++) { spi_gpio->cs_gpios[i] = devm_gpiod_get_index(dev, "cs", -- cgit v1.2.3-59-g8ed1b From ffa69d6a16f686efe45269342474e421f2aa58b2 Mon Sep 17 00:00:00 2001 From: Gaku Inami Date: Wed, 5 Sep 2018 10:49:36 +0200 Subject: spi: sh-msiof: Fix invalid SPI use during system suspend If the SPI queue is running during system suspend, the system may lock up. Fix this by stopping/restarting the queue during system suspend/resume by calling spi_master_suspend()/spi_master_resume() from the PM callbacks. In-kernel users will receive an -ESHUTDOWN error while system suspend/resume is in progress. Signed-off-by: Gaku Inami Signed-off-by: Hiromitsu Yamasaki [geert: Cleanup, reword] Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sh-msiof.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 539d6d1a277a..bfe4e6d4f7bf 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -1426,12 +1426,37 @@ static const struct platform_device_id spi_driver_ids[] = { }; MODULE_DEVICE_TABLE(platform, spi_driver_ids); +#ifdef CONFIG_PM_SLEEP +static int sh_msiof_spi_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_msiof_spi_priv *p = platform_get_drvdata(pdev); + + return spi_master_suspend(p->master); +} + +static int sh_msiof_spi_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_msiof_spi_priv *p = platform_get_drvdata(pdev); + + return spi_master_resume(p->master); +} + +static SIMPLE_DEV_PM_OPS(sh_msiof_spi_pm_ops, sh_msiof_spi_suspend, + sh_msiof_spi_resume); +#define DEV_PM_OPS &sh_msiof_spi_pm_ops +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + static struct platform_driver sh_msiof_spi_drv = { .probe = sh_msiof_spi_probe, .remove = sh_msiof_spi_remove, .id_table = spi_driver_ids, .driver = { .name = "spi_sh_msiof", + .pm = DEV_PM_OPS, .of_match_table = of_match_ptr(sh_msiof_match), }, }; -- cgit v1.2.3-59-g8ed1b From 31a5fae4c5a009898da6d177901d5328051641ff Mon Sep 17 00:00:00 2001 From: Hiromitsu Yamasaki Date: Wed, 5 Sep 2018 10:49:37 +0200 Subject: spi: sh-msiof: Fix handling of write value for SISTR register This patch changes writing to the SISTR register according to the H/W user's manual. The TDREQ bit and RDREQ bits of SISTR are read-only, and must be written their initial values of zero. Signed-off-by: Hiromitsu Yamasaki [geert: reword] Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-sh-msiof.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index bfe4e6d4f7bf..101cd6aae2ea 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -397,7 +397,8 @@ static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p, static void sh_msiof_reset_str(struct sh_msiof_spi_priv *p) { - sh_msiof_write(p, STR, sh_msiof_read(p, STR)); + sh_msiof_write(p, STR, + sh_msiof_read(p, STR) & ~(STR_TDREQ | STR_RDREQ)); } static void sh_msiof_spi_write_fifo_8(struct sh_msiof_spi_priv *p, -- cgit v1.2.3-59-g8ed1b From c1ca59c22c56930b377a665fdd1b43351887830b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Sep 2018 10:49:38 +0200 Subject: spi: rspi: Fix invalid SPI use during system suspend If the SPI queue is running during system suspend, the system may lock up. Fix this by stopping/restarting the queue during system suspend/resume, by calling spi_master_suspend()/spi_master_resume() from the PM callbacks. In-kernel users will receive an -ESHUTDOWN error while system suspend/resume is in progress. Based on a patch for sh-msiof by Gaku Inami. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-rspi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 95dc4d78618d..f93a4587e3fb 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -1350,12 +1350,36 @@ static const struct platform_device_id spi_driver_ids[] = { MODULE_DEVICE_TABLE(platform, spi_driver_ids); +#ifdef CONFIG_PM_SLEEP +static int rspi_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rspi_data *rspi = platform_get_drvdata(pdev); + + return spi_master_suspend(rspi->master); +} + +static int rspi_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct rspi_data *rspi = platform_get_drvdata(pdev); + + return spi_master_resume(rspi->master); +} + +static SIMPLE_DEV_PM_OPS(rspi_pm_ops, rspi_suspend, rspi_resume); +#define DEV_PM_OPS &rspi_pm_ops +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + static struct platform_driver rspi_driver = { .probe = rspi_probe, .remove = rspi_remove, .id_table = spi_driver_ids, .driver = { .name = "renesas_spi", + .pm = DEV_PM_OPS, .of_match_table = of_match_ptr(rspi_of_match), }, }; -- cgit v1.2.3-59-g8ed1b From 8dbbaa47b96f6ea5f09f922b4effff3c505cd8cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 5 Sep 2018 10:49:39 +0200 Subject: spi: rspi: Fix interrupted DMA transfers When interrupted, wait_event_interruptible_timeout() returns -ERESTARTSYS, and the SPI transfer in progress will fail, as expected: m25p80 spi0.0: SPI transfer failed: -512 spi_master spi0: failed to transfer one message from queue However, as the underlying DMA transfers may not have completed, all subsequent SPI transfers may start to fail: spi_master spi0: receive timeout qspi_transfer_out_in() returned -110 m25p80 spi0.0: SPI transfer failed: -110 spi_master spi0: failed to transfer one message from queue Fix this by calling dmaengine_terminate_all() not only for timeouts, but also for errors. This can be reproduced on r8a7991/koelsch, using "hd /dev/mtd0" followed by CTRL-C. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-rspi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index f93a4587e3fb..b37de1d991d6 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -598,11 +598,13 @@ static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx, ret = wait_event_interruptible_timeout(rspi->wait, rspi->dma_callbacked, HZ); - if (ret > 0 && rspi->dma_callbacked) + if (ret > 0 && rspi->dma_callbacked) { ret = 0; - else if (!ret) { - dev_err(&rspi->master->dev, "DMA timeout\n"); - ret = -ETIMEDOUT; + } else { + if (!ret) { + dev_err(&rspi->master->dev, "DMA timeout\n"); + ret = -ETIMEDOUT; + } if (tx) dmaengine_terminate_all(rspi->master->dma_tx); if (rx) -- cgit v1.2.3-59-g8ed1b From ae45893f74c72e632cbad882509f12558db2e4f3 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Wed, 5 Sep 2018 17:31:37 +0900 Subject: ASoC: uniphier: change status to orphan Since I'm leaving from Socionext, I'll unable to access specification documents of this hardware (these are not public). So change the state to orphan until someone will maintain this driver. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fc711d23dc83..5ee6b45248e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13159,9 +13159,8 @@ F: drivers/i2c/busses/i2c-synquacer.c F: Documentation/devicetree/bindings/i2c/i2c-synquacer.txt SOCIONEXT UNIPHIER SOUND DRIVER -M: Katsuhiro Suzuki L: alsa-devel@alsa-project.org (moderated for non-subscribers) -S: Maintained +S: Orphan F: sound/soc/uniphier/ SOEKRIS NET48XX LED SUPPORT -- cgit v1.2.3-59-g8ed1b From b2d35fa5fc80c27e868e393dcab4c94a0d71737f Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Tue, 4 Sep 2018 12:47:21 +0200 Subject: selftests: add headers_install to lib.mk If the kernel headers aren't installed we can't build all the tests. Add a new make target rule 'khdr' in the file lib.mk to generate the kernel headers and that gets include for every test-dir Makefile that includes lib.mk If the testdir in turn have its own sub-dirs the top_srcdir needs to be set to the linux-rootdir to be able to generate the kernel headers. Signed-off-by: Anders Roxell Reviewed-by: Fathi Boudra Signed-off-by: Shuah Khan (Samsung OSG) --- Makefile | 14 +------------- scripts/subarch.include | 13 +++++++++++++ tools/testing/selftests/android/Makefile | 2 +- tools/testing/selftests/android/ion/Makefile | 2 ++ tools/testing/selftests/futex/functional/Makefile | 1 + tools/testing/selftests/gpio/Makefile | 7 ++----- tools/testing/selftests/kvm/Makefile | 7 ++----- tools/testing/selftests/lib.mk | 12 ++++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/networking/timestamping/Makefile | 1 + tools/testing/selftests/vm/Makefile | 4 ---- 11 files changed, 36 insertions(+), 28 deletions(-) create mode 100644 scripts/subarch.include diff --git a/Makefile b/Makefile index 2b458801ba74..8b3fbdb2759b 100644 --- a/Makefile +++ b/Makefile @@ -299,19 +299,7 @@ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION -# SUBARCH tells the usermode build what the underlying arch is. That is set -# first, and if a usermode build is happening, the "ARCH=um" on the command -# line overrides the setting of ARCH below. If a native build is happening, -# then ARCH is assigned, getting whatever value it gets normally, and -# SUBARCH is subsequently ignored. - -SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ - -e s/sun4u/sparc64/ \ - -e s/arm.*/arm/ -e s/sa110/arm/ \ - -e s/s390x/s390/ -e s/parisc64/parisc/ \ - -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ - -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \ - -e s/riscv.*/riscv/) +include scripts/subarch.include # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- diff --git a/scripts/subarch.include b/scripts/subarch.include new file mode 100644 index 000000000000..650682821126 --- /dev/null +++ b/scripts/subarch.include @@ -0,0 +1,13 @@ +# SUBARCH tells the usermode build what the underlying arch is. That is set +# first, and if a usermode build is happening, the "ARCH=um" on the command +# line overrides the setting of ARCH below. If a native build is happening, +# then ARCH is assigned, getting whatever value it gets normally, and +# SUBARCH is subsequently ignored. + +SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ + -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \ + -e s/riscv.*/riscv/) diff --git a/tools/testing/selftests/android/Makefile b/tools/testing/selftests/android/Makefile index 72c25a3cb658..d9a725478375 100644 --- a/tools/testing/selftests/android/Makefile +++ b/tools/testing/selftests/android/Makefile @@ -6,7 +6,7 @@ TEST_PROGS := run.sh include ../lib.mk -all: +all: khdr @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ diff --git a/tools/testing/selftests/android/ion/Makefile b/tools/testing/selftests/android/ion/Makefile index e03695287f76..88cfe88e466f 100644 --- a/tools/testing/selftests/android/ion/Makefile +++ b/tools/testing/selftests/android/ion/Makefile @@ -10,6 +10,8 @@ $(TEST_GEN_FILES): ipcsocket.c ionutils.c TEST_PROGS := ion_test.sh +KSFT_KHDR_INSTALL := 1 +top_srcdir = ../../../../.. include ../../lib.mk $(OUTPUT)/ionapp_export: ionapp_export.c ipcsocket.c ionutils.c diff --git a/tools/testing/selftests/futex/functional/Makefile b/tools/testing/selftests/futex/functional/Makefile index ff8feca49746..ad1eeb14fda7 100644 --- a/tools/testing/selftests/futex/functional/Makefile +++ b/tools/testing/selftests/futex/functional/Makefile @@ -18,6 +18,7 @@ TEST_GEN_FILES := \ TEST_PROGS := run.sh +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_FILES): $(HEADERS) diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 1bbb47565c55..4665cdbf1a8d 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -21,11 +21,8 @@ endef CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ LDLIBS += -lmount -I/usr/include/libmount -$(BINARIES): ../../../gpio/gpio-utils.o ../../../../usr/include/linux/gpio.h +$(BINARIES):| khdr +$(BINARIES): ../../../gpio/gpio-utils.o ../../../gpio/gpio-utils.o: make ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C ../../../gpio - -../../../../usr/include/linux/gpio.h: - make -C ../../../.. headers_install INSTALL_HDR_PATH=$(shell pwd)/../../../../usr/ - diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 03b0f551bedf..87d1a8488af8 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -37,9 +37,6 @@ $(LIBKVM_OBJ): $(OUTPUT)/%.o: %.c $(OUTPUT)/libkvm.a: $(LIBKVM_OBJ) $(AR) crs $@ $^ -$(LINUX_HDR_PATH): - make -C $(top_srcdir) headers_install - -all: $(STATIC_LIBS) $(LINUX_HDR_PATH) +all: $(STATIC_LIBS) $(TEST_GEN_PROGS): $(STATIC_LIBS) -$(TEST_GEN_PROGS) $(LIBKVM_OBJ): | $(LINUX_HDR_PATH) +$(STATIC_LIBS):| khdr diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 17ab36605a8e..0a8e75886224 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -16,8 +16,20 @@ TEST_GEN_PROGS := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS)) TEST_GEN_PROGS_EXTENDED := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS_EXTENDED)) TEST_GEN_FILES := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_FILES)) +top_srcdir ?= ../../../.. +include $(top_srcdir)/scripts/subarch.include +ARCH ?= $(SUBARCH) + all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) +.PHONY: khdr +khdr: + make ARCH=$(ARCH) -C $(top_srcdir) headers_install + +ifdef KSFT_KHDR_INSTALL +$(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES):| khdr +endif + .ONESHELL: define RUN_TEST_PRINT_RESULT TEST_HDR_MSG="selftests: "`basename $$PWD`:" $$BASENAME_TEST"; \ diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 9cca68e440a0..919aa2ac00af 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -15,6 +15,7 @@ TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls +KSFT_KHDR_INSTALL := 1 include ../lib.mk $(OUTPUT)/reuseport_bpf_numa: LDFLAGS += -lnuma diff --git a/tools/testing/selftests/networking/timestamping/Makefile b/tools/testing/selftests/networking/timestamping/Makefile index a728040edbe1..14cfcf006936 100644 --- a/tools/testing/selftests/networking/timestamping/Makefile +++ b/tools/testing/selftests/networking/timestamping/Makefile @@ -5,6 +5,7 @@ TEST_PROGS := hwtstamp_config rxtimestamp timestamping txtimestamp all: $(TEST_PROGS) +top_srcdir = ../../../../.. include ../../lib.mk clean: diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 9881876d2aa0..e94b7b14bcb2 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -26,10 +26,6 @@ TEST_PROGS := run_vmtests include ../lib.mk -$(OUTPUT)/userfaultfd: ../../../../usr/include/linux/kernel.h $(OUTPUT)/userfaultfd: LDLIBS += -lpthread $(OUTPUT)/mlock-random-test: LDLIBS += -lcap - -../../../../usr/include/linux/kernel.h: - make -C ../../../.. headers_install -- cgit v1.2.3-59-g8ed1b From 53cf59d6c0ad3edc4f4449098706a8f8986258b6 Mon Sep 17 00:00:00 2001 From: Lei Yang Date: Wed, 5 Sep 2018 11:14:49 +0800 Subject: selftests/efivarfs: add required kernel configs add config file Signed-off-by: Lei Yang Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/efivarfs/config | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/efivarfs/config diff --git a/tools/testing/selftests/efivarfs/config b/tools/testing/selftests/efivarfs/config new file mode 100644 index 000000000000..4e151f1005b2 --- /dev/null +++ b/tools/testing/selftests/efivarfs/config @@ -0,0 +1 @@ +CONFIG_EFIVAR_FS=y -- cgit v1.2.3-59-g8ed1b From 4d85af102a66ee6aeefa596f273169e77fb2b48e Mon Sep 17 00:00:00 2001 From: Lei Yang Date: Wed, 5 Sep 2018 17:57:15 +0800 Subject: selftests: memory-hotplug: add required configs add CONFIG_MEMORY_HOTREMOVE=y in config without this config, /sys/devices/system/memory/memory*/removable always return 0, I endup getting an early skip during test Signed-off-by: Lei Yang Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/memory-hotplug/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/memory-hotplug/config b/tools/testing/selftests/memory-hotplug/config index 2fde30191a47..a7e8cd5bb265 100644 --- a/tools/testing/selftests/memory-hotplug/config +++ b/tools/testing/selftests/memory-hotplug/config @@ -2,3 +2,4 @@ CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_NOTIFIER_ERROR_INJECTION=y CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m +CONFIG_MEMORY_HOTREMOVE=y -- cgit v1.2.3-59-g8ed1b From e3f3d7ab00cd459d0f7a839758a4542f4d4b8ac8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 5 Sep 2018 10:46:27 +0300 Subject: hwmon: (nct6775) Set weight source to zero correctly This is dead code because j can never be 1 at this point. We had intended to just test if the bit was clear. Fixes: bbd8decd4123 ("hwmon: (nct6775) Add support for weighted fan control") Signed-off-by: Dan Carpenter Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 944f5b63aecd..139781ae830b 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -1558,7 +1558,7 @@ static void nct6775_update_pwm(struct device *dev) reg = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[i]); data->pwm_weight_temp_sel[i] = reg & 0x1f; /* If weight is disabled, report weight source as 0 */ - if (j == 1 && !(reg & 0x80)) + if (!(reg & 0x80)) data->pwm_weight_temp_sel[i] = 0; /* Weight temp data */ -- cgit v1.2.3-59-g8ed1b From 69235ccf491d2e26aefd465c0d3ccd1e3b2a9a9c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 6 Sep 2018 03:21:33 +0000 Subject: ASoC: rsnd: adg: care clock-frequency size ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = ; /* this is OK */ clock-frequency = ; /* this is NG */ Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/adg.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 3a3064dda57f..051f96405346 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -462,6 +462,11 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, goto rsnd_adg_get_clkout_end; req_size = prop->length / sizeof(u32); + if (req_size > REQ_SIZE) { + dev_err(dev, + "too many clock-frequency, use top %d\n", REQ_SIZE); + req_size = REQ_SIZE; + } of_property_read_u32_array(np, "clock-frequency", req_rate, req_size); req_48kHz_rate = 0; -- cgit v1.2.3-59-g8ed1b From 6c92d5a2744e27619a8fcc9d74b91ee9f1cdebd1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 6 Sep 2018 03:21:47 +0000 Subject: ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/core.c | 10 +++++++++- sound/soc/sh/rcar/dma.c | 4 ++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index b35f5509cfe2..d23c2bbff0cf 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -478,7 +478,7 @@ static int rsnd_status_update(u32 *status, (func_call && (mod)->ops->fn) ? #fn : ""); \ if (func_call && (mod)->ops->fn) \ tmp = (mod)->ops->fn(mod, io, param); \ - if (tmp) \ + if (tmp && (tmp != -EPROBE_DEFER)) \ dev_err(dev, "%s[%d] : %s error %d\n", \ rsnd_mod_name(mod), rsnd_mod_id(mod), \ #fn, tmp); \ @@ -1561,6 +1561,14 @@ exit_snd_probe: rsnd_dai_call(remove, &rdai->capture, priv); } + /* + * adg is very special mod which can't use rsnd_dai_call(remove), + * and it registers ADG clock on probe. + * It should be unregister if probe failed. + * Mainly it is assuming -EPROBE_DEFER case + */ + rsnd_adg_remove(priv); + return ret; } diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index fe63ef8600d0..d65ea7bc4dac 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -241,6 +241,10 @@ static int rsnd_dmaen_attach(struct rsnd_dai_stream *io, /* try to get DMAEngine channel */ chan = rsnd_dmaen_request_channel(io, mod_from, mod_to); if (IS_ERR_OR_NULL(chan)) { + /* Let's follow when -EPROBE_DEFER case */ + if (PTR_ERR(chan) == -EPROBE_DEFER) + return PTR_ERR(chan); + /* * DMA failed. try to PIO mode * see -- cgit v1.2.3-59-g8ed1b From 88d0895d0ea9d4431507d576c963f2ff9918144d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 31 Aug 2018 15:08:44 +0200 Subject: batman-adv: Avoid probe ELP information leak The probe ELPs for WiFi interfaces are expanded to contain at least BATADV_ELP_MIN_PROBE_SIZE bytes. This is usually a lot more than the number of bytes which the template ELP packet requires. These extra padding bytes were not initialized and thus could contain data which were previously stored at the same location. It is therefore required to set it to some predefined or random values to avoid leaking private information from the system transmitting these kind of packets. Fixes: e4623c913508 ("batman-adv: Avoid probe ELP information leak") Signed-off-by: Sven Eckelmann Acked-by: Antonio Quartulli Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v_elp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index 71c20c1d4002..e103c759b7ab 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -241,7 +241,7 @@ batadv_v_elp_wifi_neigh_probe(struct batadv_hardif_neigh_node *neigh) * the packet to be exactly of that size to make the link * throughput estimation effective. */ - skb_put(skb, probe_len - hard_iface->bat_v.elp_skb->len); + skb_put_zero(skb, probe_len - hard_iface->bat_v.elp_skb->len); batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Sending unicast (probe) ELP packet on interface %s to %pM\n", -- cgit v1.2.3-59-g8ed1b From b9fd14c20871e6189f635e49b32d7789e430b3c8 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 31 Aug 2018 16:46:47 +0200 Subject: batman-adv: Fix segfault when writing to throughput_override The per hardif sysfs file "batman_adv/throughput_override" prints the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/sysfs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index f2eef43bd2ec..3a76e8970c02 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -1090,8 +1090,9 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj, if (old_tp_override == tp_override) goto out; - batadv_info(net_dev, "%s: Changing from: %u.%u MBit to: %u.%u MBit\n", - "throughput_override", + batadv_info(hard_iface->soft_iface, + "%s: %s: Changing from: %u.%u MBit to: %u.%u MBit\n", + "throughput_override", net_dev->name, old_tp_override / 10, old_tp_override % 10, tp_override / 10, tp_override % 10); -- cgit v1.2.3-59-g8ed1b From a25bab9d723a08bd0bdafb1529faf9094c690b70 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 31 Aug 2018 16:56:29 +0200 Subject: batman-adv: Fix segfault when writing to sysfs elp_interval The per hardif sysfs file "batman_adv/elp_interval" is using the generic functions to store/show uint values. The helper __batadv_store_uint_attr requires the softif net_device as parameter to print the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0744ff8fa8fa ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/sysfs.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c index 3a76e8970c02..09427fc6494a 100644 --- a/net/batman-adv/sysfs.c +++ b/net/batman-adv/sysfs.c @@ -188,7 +188,8 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ \ return __batadv_store_uint_attr(buff, count, _min, _max, \ _post_func, attr, \ - &bat_priv->_var, net_dev); \ + &bat_priv->_var, net_dev, \ + NULL); \ } #define BATADV_ATTR_SIF_SHOW_UINT(_name, _var) \ @@ -262,7 +263,9 @@ ssize_t batadv_store_##_name(struct kobject *kobj, \ \ length = __batadv_store_uint_attr(buff, count, _min, _max, \ _post_func, attr, \ - &hard_iface->_var, net_dev); \ + &hard_iface->_var, \ + hard_iface->soft_iface, \ + net_dev); \ \ batadv_hardif_put(hard_iface); \ return length; \ @@ -356,10 +359,12 @@ __batadv_store_bool_attr(char *buff, size_t count, static int batadv_store_uint_attr(const char *buff, size_t count, struct net_device *net_dev, + struct net_device *slave_dev, const char *attr_name, unsigned int min, unsigned int max, atomic_t *attr) { + char ifname[IFNAMSIZ + 3] = ""; unsigned long uint_val; int ret; @@ -385,8 +390,11 @@ static int batadv_store_uint_attr(const char *buff, size_t count, if (atomic_read(attr) == uint_val) return count; - batadv_info(net_dev, "%s: Changing from: %i to: %lu\n", - attr_name, atomic_read(attr), uint_val); + if (slave_dev) + snprintf(ifname, sizeof(ifname), "%s: ", slave_dev->name); + + batadv_info(net_dev, "%s: %sChanging from: %i to: %lu\n", + attr_name, ifname, atomic_read(attr), uint_val); atomic_set(attr, uint_val); return count; @@ -397,12 +405,13 @@ static ssize_t __batadv_store_uint_attr(const char *buff, size_t count, void (*post_func)(struct net_device *), const struct attribute *attr, atomic_t *attr_store, - struct net_device *net_dev) + struct net_device *net_dev, + struct net_device *slave_dev) { int ret; - ret = batadv_store_uint_attr(buff, count, net_dev, attr->name, min, max, - attr_store); + ret = batadv_store_uint_attr(buff, count, net_dev, slave_dev, + attr->name, min, max, attr_store); if (post_func && ret) post_func(net_dev); @@ -571,7 +580,7 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj, return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE, batadv_post_gw_reselect, attr, &bat_priv->gw.sel_class, - bat_priv->soft_iface); + bat_priv->soft_iface, NULL); } static ssize_t batadv_show_gw_bwidth(struct kobject *kobj, -- cgit v1.2.3-59-g8ed1b From dff9bc42ab0b2d38c5e90ddd79b238fed5b4c7ad Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Aug 2018 21:04:41 +0200 Subject: batman-adv: Prevent duplicated gateway_node entry The function batadv_gw_node_add is responsible for adding new gw_node to the gateway_list. It is expecting that the caller already checked that there is not already an entry with the same key or not. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/gateway_client.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 8b198ee798c9..140c61a3f1ec 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -348,6 +349,9 @@ out: * @bat_priv: the bat priv with all the soft interface information * @orig_node: originator announcing gateway capabilities * @gateway: announced bandwidth information + * + * Has to be called with the appropriate locks being acquired + * (gw.list_lock). */ static void batadv_gw_node_add(struct batadv_priv *bat_priv, struct batadv_orig_node *orig_node, @@ -355,6 +359,8 @@ static void batadv_gw_node_add(struct batadv_priv *bat_priv, { struct batadv_gw_node *gw_node; + lockdep_assert_held(&bat_priv->gw.list_lock); + if (gateway->bandwidth_down == 0) return; @@ -369,10 +375,8 @@ static void batadv_gw_node_add(struct batadv_priv *bat_priv, gw_node->bandwidth_down = ntohl(gateway->bandwidth_down); gw_node->bandwidth_up = ntohl(gateway->bandwidth_up); - spin_lock_bh(&bat_priv->gw.list_lock); kref_get(&gw_node->refcount); hlist_add_head_rcu(&gw_node->list, &bat_priv->gw.gateway_list); - spin_unlock_bh(&bat_priv->gw.list_lock); batadv_dbg(BATADV_DBG_BATMAN, bat_priv, "Found new gateway %pM -> gw bandwidth: %u.%u/%u.%u MBit\n", @@ -428,11 +432,14 @@ void batadv_gw_node_update(struct batadv_priv *bat_priv, { struct batadv_gw_node *gw_node, *curr_gw = NULL; + spin_lock_bh(&bat_priv->gw.list_lock); gw_node = batadv_gw_node_get(bat_priv, orig_node); if (!gw_node) { batadv_gw_node_add(bat_priv, orig_node, gateway); + spin_unlock_bh(&bat_priv->gw.list_lock); goto out; } + spin_unlock_bh(&bat_priv->gw.list_lock); if (gw_node->bandwidth_down == ntohl(gateway->bandwidth_down) && gw_node->bandwidth_up == ntohl(gateway->bandwidth_up)) -- cgit v1.2.3-59-g8ed1b From fa122fec8640eb7186ce5a41b83a4c1744ceef8f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Aug 2018 21:04:42 +0200 Subject: batman-adv: Prevent duplicated nc_node entry The function batadv_nc_get_nc_node is responsible for adding new nc_nodes to the in_coding_list and out_coding_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d56b1705e28c ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/network-coding.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c index c3578444f3cb..34caf129a9bf 100644 --- a/net/batman-adv/network-coding.c +++ b/net/batman-adv/network-coding.c @@ -854,16 +854,27 @@ batadv_nc_get_nc_node(struct batadv_priv *bat_priv, spinlock_t *lock; /* Used to lock list selected by "int in_coding" */ struct list_head *list; + /* Select ingoing or outgoing coding node */ + if (in_coding) { + lock = &orig_neigh_node->in_coding_list_lock; + list = &orig_neigh_node->in_coding_list; + } else { + lock = &orig_neigh_node->out_coding_list_lock; + list = &orig_neigh_node->out_coding_list; + } + + spin_lock_bh(lock); + /* Check if nc_node is already added */ nc_node = batadv_nc_find_nc_node(orig_node, orig_neigh_node, in_coding); /* Node found */ if (nc_node) - return nc_node; + goto unlock; nc_node = kzalloc(sizeof(*nc_node), GFP_ATOMIC); if (!nc_node) - return NULL; + goto unlock; /* Initialize nc_node */ INIT_LIST_HEAD(&nc_node->list); @@ -872,22 +883,14 @@ batadv_nc_get_nc_node(struct batadv_priv *bat_priv, kref_get(&orig_neigh_node->refcount); nc_node->orig_node = orig_neigh_node; - /* Select ingoing or outgoing coding node */ - if (in_coding) { - lock = &orig_neigh_node->in_coding_list_lock; - list = &orig_neigh_node->in_coding_list; - } else { - lock = &orig_neigh_node->out_coding_list_lock; - list = &orig_neigh_node->out_coding_list; - } - batadv_dbg(BATADV_DBG_NC, bat_priv, "Adding nc_node %pM -> %pM\n", nc_node->addr, nc_node->orig_node->orig); /* Add nc_node to orig_node */ - spin_lock_bh(lock); kref_get(&nc_node->refcount); list_add_tail_rcu(&nc_node->list, list); + +unlock: spin_unlock_bh(lock); return nc_node; -- cgit v1.2.3-59-g8ed1b From 94cb82f594ed86be303398d6dfc7640a6f1d45d4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Aug 2018 21:04:43 +0200 Subject: batman-adv: Prevent duplicated softif_vlan entry The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/soft-interface.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c index 1485263a348b..626ddca332db 100644 --- a/net/batman-adv/soft-interface.c +++ b/net/batman-adv/soft-interface.c @@ -574,15 +574,20 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid) struct batadv_softif_vlan *vlan; int err; + spin_lock_bh(&bat_priv->softif_vlan_list_lock); + vlan = batadv_softif_vlan_get(bat_priv, vid); if (vlan) { batadv_softif_vlan_put(vlan); + spin_unlock_bh(&bat_priv->softif_vlan_list_lock); return -EEXIST; } vlan = kzalloc(sizeof(*vlan), GFP_ATOMIC); - if (!vlan) + if (!vlan) { + spin_unlock_bh(&bat_priv->softif_vlan_list_lock); return -ENOMEM; + } vlan->bat_priv = bat_priv; vlan->vid = vid; @@ -590,17 +595,23 @@ int batadv_softif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid) atomic_set(&vlan->ap_isolation, 0); + kref_get(&vlan->refcount); + hlist_add_head_rcu(&vlan->list, &bat_priv->softif_vlan_list); + spin_unlock_bh(&bat_priv->softif_vlan_list_lock); + + /* batadv_sysfs_add_vlan cannot be in the spinlock section due to the + * sleeping behavior of the sysfs functions and the fs_reclaim lock + */ err = batadv_sysfs_add_vlan(bat_priv->soft_iface, vlan); if (err) { - kfree(vlan); + /* ref for the function */ + batadv_softif_vlan_put(vlan); + + /* ref for the list */ + batadv_softif_vlan_put(vlan); return err; } - spin_lock_bh(&bat_priv->softif_vlan_list_lock); - kref_get(&vlan->refcount); - hlist_add_head_rcu(&vlan->list, &bat_priv->softif_vlan_list); - spin_unlock_bh(&bat_priv->softif_vlan_list_lock); - /* add a new TT local entry. This one will be marked with the NOPURGE * flag */ -- cgit v1.2.3-59-g8ed1b From e7136e48ffdfb9f37b0820f619380485eb407361 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Aug 2018 21:04:44 +0200 Subject: batman-adv: Prevent duplicated global TT entry The function batadv_tt_global_orig_entry_add is responsible for adding new tt_orig_list_entry to the orig_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d657e621a0f5 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/translation-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 12a2b7d21376..d21624c44665 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1613,6 +1613,8 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global, { struct batadv_tt_orig_list_entry *orig_entry; + spin_lock_bh(&tt_global->list_lock); + orig_entry = batadv_tt_global_orig_entry_find(tt_global, orig_node); if (orig_entry) { /* refresh the ttvn: the current value could be a bogus one that @@ -1635,11 +1637,9 @@ batadv_tt_global_orig_entry_add(struct batadv_tt_global_entry *tt_global, orig_entry->flags = flags; kref_init(&orig_entry->refcount); - spin_lock_bh(&tt_global->list_lock); kref_get(&orig_entry->refcount); hlist_add_head_rcu(&orig_entry->list, &tt_global->orig_list); - spin_unlock_bh(&tt_global->list_lock); atomic_inc(&tt_global->orig_list_count); sync_flags: @@ -1647,6 +1647,8 @@ sync_flags: out: if (orig_entry) batadv_tt_orig_list_entry_put(orig_entry); + + spin_unlock_bh(&tt_global->list_lock); } /** -- cgit v1.2.3-59-g8ed1b From ae3cdc97dc10c7a3b31f297dab429bfb774c9ccb Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 12 Aug 2018 21:04:45 +0200 Subject: batman-adv: Prevent duplicated tvlv handler The function batadv_tvlv_handler_register is responsible for adding new tvlv_handler to the handler_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/tvlv.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/tvlv.c b/net/batman-adv/tvlv.c index a637458205d1..40e69c9346d2 100644 --- a/net/batman-adv/tvlv.c +++ b/net/batman-adv/tvlv.c @@ -529,15 +529,20 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv, { struct batadv_tvlv_handler *tvlv_handler; + spin_lock_bh(&bat_priv->tvlv.handler_list_lock); + tvlv_handler = batadv_tvlv_handler_get(bat_priv, type, version); if (tvlv_handler) { + spin_unlock_bh(&bat_priv->tvlv.handler_list_lock); batadv_tvlv_handler_put(tvlv_handler); return; } tvlv_handler = kzalloc(sizeof(*tvlv_handler), GFP_ATOMIC); - if (!tvlv_handler) + if (!tvlv_handler) { + spin_unlock_bh(&bat_priv->tvlv.handler_list_lock); return; + } tvlv_handler->ogm_handler = optr; tvlv_handler->unicast_handler = uptr; @@ -547,7 +552,6 @@ void batadv_tvlv_handler_register(struct batadv_priv *bat_priv, kref_init(&tvlv_handler->refcount); INIT_HLIST_NODE(&tvlv_handler->list); - spin_lock_bh(&bat_priv->tvlv.handler_list_lock); kref_get(&tvlv_handler->refcount); hlist_add_head_rcu(&tvlv_handler->list, &bat_priv->tvlv.handler_list); spin_unlock_bh(&bat_priv->tvlv.handler_list_lock); -- cgit v1.2.3-59-g8ed1b From 7035c568999d6774ff35459a0280eb33e0207168 Mon Sep 17 00:00:00 2001 From: Lei Yang Date: Thu, 6 Sep 2018 13:47:23 +0800 Subject: cgroup: kselftests: add test_core to .gitignore Update .gitignore file. Signed-off-by: Lei Yang Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/cgroup/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/cgroup/.gitignore b/tools/testing/selftests/cgroup/.gitignore index 95eb3a53c381..adacda50a4b2 100644 --- a/tools/testing/selftests/cgroup/.gitignore +++ b/tools/testing/selftests/cgroup/.gitignore @@ -1 +1,2 @@ test_memcontrol +test_core -- cgit v1.2.3-59-g8ed1b From 5af96b9c59c72fb2af2d19c5cc2f3cdcee391dff Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Fri, 7 Sep 2018 05:45:54 +0800 Subject: batman-adv: fix backbone_gw refcount on queue_work() failure The backbone_gw refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/bridge_loop_avoidance.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index ff9659af6b91..5f1aeeded0e3 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1772,6 +1772,7 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb, { struct batadv_bla_backbone_gw *backbone_gw; struct ethhdr *ethhdr; + bool ret; ethhdr = eth_hdr(skb); @@ -1795,8 +1796,13 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb, if (unlikely(!backbone_gw)) return true; - queue_work(batadv_event_workqueue, &backbone_gw->report_work); - /* backbone_gw is unreferenced in the report work function function */ + ret = queue_work(batadv_event_workqueue, &backbone_gw->report_work); + + /* backbone_gw is unreferenced in the report work function function + * if queue_work() call was successful + */ + if (!ret) + batadv_backbone_gw_put(backbone_gw); return true; } -- cgit v1.2.3-59-g8ed1b From 4c4af6900844ab04c9434c972021d7b48610e06a Mon Sep 17 00:00:00 2001 From: Marek Lindner Date: Fri, 7 Sep 2018 05:45:55 +0800 Subject: batman-adv: fix hardif_neigh refcount on queue_work() failure The hardif_neigh refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by: Marek Lindner Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v_elp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c index e103c759b7ab..9f481cfdf77d 100644 --- a/net/batman-adv/bat_v_elp.c +++ b/net/batman-adv/bat_v_elp.c @@ -268,6 +268,7 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) struct batadv_priv *bat_priv; struct sk_buff *skb; u32 elp_interval; + bool ret; bat_v = container_of(work, struct batadv_hard_iface_bat_v, elp_wq.work); hard_iface = container_of(bat_v, struct batadv_hard_iface, bat_v); @@ -329,8 +330,11 @@ static void batadv_v_elp_periodic_work(struct work_struct *work) * may sleep and that is not allowed in an rcu protected * context. Therefore schedule a task for that. */ - queue_work(batadv_event_workqueue, - &hardif_neigh->bat_v.metric_work); + ret = queue_work(batadv_event_workqueue, + &hardif_neigh->bat_v.metric_work); + + if (!ret) + batadv_hardif_neigh_put(hardif_neigh); } rcu_read_unlock(); -- cgit v1.2.3-59-g8ed1b From c793279c77035053e67937f5743c6ebfc303e7c5 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 6 Sep 2018 09:47:51 -0700 Subject: hwmon: (nct6775) Fix access to fan pulse registers Not all fans have a fan pulse register. This can result in reading beyond the end of REG_FAN_PULSES and FAN_PULSE_SHIFT arrays, and was reported by smatch as possible error. 1672 for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { ^^^^^^^^^^^^^^^^^^^^^^^^ This is a 7 element array. ... 1685 data->fan_pulses[i] = 1686 (nct6775_read_value(data, data->REG_FAN_PULSES[i]) 1687 >> data->FAN_PULSE_SHIFT[i]) & 0x03; ^^^^^^^^^^^^^^^^^^^^^^^^ FAN_PULSE_SHIFT is either 5 or 6 elements. To fix the problem, we have to ensure that all REG_FAN_PULSES and FAN_PULSE_SHIFT have the appropriate length, and that REG_FAN_PULSES is only read if the register actually exists. Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Reported-by: Dan Carpenter Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 139781ae830b..87c316c6c341 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -299,8 +299,9 @@ static const u16 NCT6775_REG_PWM_READ[] = { static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; static const u16 NCT6775_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d }; -static const u16 NCT6775_REG_FAN_PULSES[] = { 0x641, 0x642, 0x643, 0x644, 0 }; -static const u16 NCT6775_FAN_PULSE_SHIFT[] = { 0, 0, 0, 0, 0, 0 }; +static const u16 NCT6775_REG_FAN_PULSES[NUM_FAN] = { + 0x641, 0x642, 0x643, 0x644 }; +static const u16 NCT6775_FAN_PULSE_SHIFT[NUM_FAN] = { }; static const u16 NCT6775_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d }; @@ -425,8 +426,8 @@ static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0, 0, 0, 0 }; static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642, 0x64a, 0x64c }; -static const u16 NCT6776_REG_FAN_PULSES[] = { - 0x644, 0x645, 0x646, 0x647, 0x648, 0x649, 0 }; +static const u16 NCT6776_REG_FAN_PULSES[NUM_FAN] = { + 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; static const u16 NCT6776_REG_WEIGHT_DUTY_BASE[] = { 0x13e, 0x23e, 0x33e, 0x83e, 0x93e, 0xa3e }; @@ -502,8 +503,8 @@ static const s8 NCT6779_BEEP_BITS[] = { static const u16 NCT6779_REG_FAN[] = { 0x4b0, 0x4b2, 0x4b4, 0x4b6, 0x4b8, 0x4ba, 0x660 }; -static const u16 NCT6779_REG_FAN_PULSES[] = { - 0x644, 0x645, 0x646, 0x647, 0x648, 0x649, 0 }; +static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = { + 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = { 0x136, 0x236, 0x336, 0x836, 0x936, 0xa36, 0xb36 }; @@ -779,8 +780,8 @@ static const u16 NCT6106_REG_TEMP_CONFIG[] = { static const u16 NCT6106_REG_FAN[] = { 0x20, 0x22, 0x24 }; static const u16 NCT6106_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4 }; -static const u16 NCT6106_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0, 0 }; -static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4, 0, 0 }; +static const u16 NCT6106_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6 }; +static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4 }; static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 }; static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 }; @@ -1682,9 +1683,13 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) if (data->has_fan_min & BIT(i)) data->fan_min[i] = nct6775_read_value(data, data->REG_FAN_MIN[i]); - data->fan_pulses[i] = - (nct6775_read_value(data, data->REG_FAN_PULSES[i]) - >> data->FAN_PULSE_SHIFT[i]) & 0x03; + + if (data->REG_FAN_PULSES[i]) { + data->fan_pulses[i] = + (nct6775_read_value(data, + data->REG_FAN_PULSES[i]) + >> data->FAN_PULSE_SHIFT[i]) & 0x03; + } nct6775_select_fan_div(dev, data, i, reg); } -- cgit v1.2.3-59-g8ed1b From 48c2bb0b9cf863e0ed78e269f188ce65b73e0fd1 Mon Sep 17 00:00:00 2001 From: Jay Kamat Date: Fri, 7 Sep 2018 14:34:04 -0700 Subject: Fix cg_read_strcmp() Fix a couple issues with cg_read_strcmp(), to improve correctness of cgroup tests - Fix cg_read_strcmp() always returning 0 for empty "needle" strings. Previously, this function read to a size = 1 buffer when comparing against empty strings, which would lead to cg_read_strcmp() comparing two empty strings. - Fix a memory leak in cg_read_strcmp() Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests") Signed-off-by: Jay Kamat Acked-by: Roman Gushchin Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/cgroup/cgroup_util.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 1c5d2b2a583b..f857def9a9e6 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -89,17 +89,28 @@ int cg_read(const char *cgroup, const char *control, char *buf, size_t len) int cg_read_strcmp(const char *cgroup, const char *control, const char *expected) { - size_t size = strlen(expected) + 1; + size_t size; char *buf; + int ret; + + /* Handle the case of comparing against empty string */ + if (!expected) + size = 32; + else + size = strlen(expected) + 1; buf = malloc(size); if (!buf) return -1; - if (cg_read(cgroup, control, buf, size)) + if (cg_read(cgroup, control, buf, size)) { + free(buf); return -1; + } - return strcmp(expected, buf); + ret = strcmp(expected, buf); + free(buf); + return ret; } int cg_read_strstr(const char *cgroup, const char *control, const char *needle) -- cgit v1.2.3-59-g8ed1b From a987785dcd6c8ae2915460582aebd6481c81eb67 Mon Sep 17 00:00:00 2001 From: Jay Kamat Date: Fri, 7 Sep 2018 14:34:05 -0700 Subject: Add tests for memory.oom.group Add tests for memory.oom.group for the following cases: - Killing all processes in a leaf cgroup, but leaving the parent untouched - Killing all processes in a parent and leaf cgroup - Keeping processes marked by OOM_SCORE_ADJ_MIN alive when considered for being killed by the group oom killer. Signed-off-by: Jay Kamat Acked-by: Roman Gushchin Signed-off-by: Shuah Khan (Samsung OSG) --- tools/testing/selftests/cgroup/cgroup_util.c | 21 +++ tools/testing/selftests/cgroup/cgroup_util.h | 1 + tools/testing/selftests/cgroup/test_memcontrol.c | 205 +++++++++++++++++++++++ 3 files changed, 227 insertions(+) diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index f857def9a9e6..14c9fe284806 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -348,3 +348,24 @@ int is_swap_enabled(void) return cnt > 1; } + +int set_oom_adj_score(int pid, int score) +{ + char path[PATH_MAX]; + int fd, len; + + sprintf(path, "/proc/%d/oom_score_adj", pid); + + fd = open(path, O_WRONLY | O_APPEND); + if (fd < 0) + return fd; + + len = dprintf(fd, "%d", score); + if (len < 0) { + close(fd); + return len; + } + + close(fd); + return 0; +} diff --git a/tools/testing/selftests/cgroup/cgroup_util.h b/tools/testing/selftests/cgroup/cgroup_util.h index 1ff6f9f1abdc..9ac8b7958f83 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.h +++ b/tools/testing/selftests/cgroup/cgroup_util.h @@ -40,3 +40,4 @@ extern int get_temp_fd(void); extern int alloc_pagecache(int fd, size_t size); extern int alloc_anon(const char *cgroup, void *arg); extern int is_swap_enabled(void); +extern int set_oom_adj_score(int pid, int score); diff --git a/tools/testing/selftests/cgroup/test_memcontrol.c b/tools/testing/selftests/cgroup/test_memcontrol.c index cf0bddc9d271..28d321ba311b 100644 --- a/tools/testing/selftests/cgroup/test_memcontrol.c +++ b/tools/testing/selftests/cgroup/test_memcontrol.c @@ -2,6 +2,7 @@ #define _GNU_SOURCE #include +#include #include #include #include @@ -202,6 +203,36 @@ static int alloc_pagecache_50M_noexit(const char *cgroup, void *arg) return 0; } +static int alloc_anon_noexit(const char *cgroup, void *arg) +{ + int ppid = getppid(); + + if (alloc_anon(cgroup, arg)) + return -1; + + while (getppid() == ppid) + sleep(1); + + return 0; +} + +/* + * Wait until processes are killed asynchronously by the OOM killer + * If we exceed a timeout, fail. + */ +static int cg_test_proc_killed(const char *cgroup) +{ + int limit; + + for (limit = 10; limit > 0; limit--) { + if (cg_read_strcmp(cgroup, "cgroup.procs", "") == 0) + return 0; + + usleep(100000); + } + return -1; +} + /* * First, this test creates the following hierarchy: * A memory.min = 50M, memory.max = 200M @@ -964,6 +995,177 @@ cleanup: return ret; } +/* + * This test disables swapping and tries to allocate anonymous memory + * up to OOM with memory.group.oom set. Then it checks that all + * processes in the leaf (but not the parent) were killed. + */ +static int test_memcg_oom_group_leaf_events(const char *root) +{ + int ret = KSFT_FAIL; + char *parent, *child; + + parent = cg_name(root, "memcg_test_0"); + child = cg_name(root, "memcg_test_0/memcg_test_1"); + + if (!parent || !child) + goto cleanup; + + if (cg_create(parent)) + goto cleanup; + + if (cg_create(child)) + goto cleanup; + + if (cg_write(parent, "cgroup.subtree_control", "+memory")) + goto cleanup; + + if (cg_write(child, "memory.max", "50M")) + goto cleanup; + + if (cg_write(child, "memory.swap.max", "0")) + goto cleanup; + + if (cg_write(child, "memory.oom.group", "1")) + goto cleanup; + + cg_run_nowait(parent, alloc_anon_noexit, (void *) MB(60)); + cg_run_nowait(child, alloc_anon_noexit, (void *) MB(1)); + cg_run_nowait(child, alloc_anon_noexit, (void *) MB(1)); + if (!cg_run(child, alloc_anon, (void *)MB(100))) + goto cleanup; + + if (cg_test_proc_killed(child)) + goto cleanup; + + if (cg_read_key_long(child, "memory.events", "oom_kill ") <= 0) + goto cleanup; + + if (cg_read_key_long(parent, "memory.events", "oom_kill ") != 0) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (child) + cg_destroy(child); + if (parent) + cg_destroy(parent); + free(child); + free(parent); + + return ret; +} + +/* + * This test disables swapping and tries to allocate anonymous memory + * up to OOM with memory.group.oom set. Then it checks that all + * processes in the parent and leaf were killed. + */ +static int test_memcg_oom_group_parent_events(const char *root) +{ + int ret = KSFT_FAIL; + char *parent, *child; + + parent = cg_name(root, "memcg_test_0"); + child = cg_name(root, "memcg_test_0/memcg_test_1"); + + if (!parent || !child) + goto cleanup; + + if (cg_create(parent)) + goto cleanup; + + if (cg_create(child)) + goto cleanup; + + if (cg_write(parent, "memory.max", "80M")) + goto cleanup; + + if (cg_write(parent, "memory.swap.max", "0")) + goto cleanup; + + if (cg_write(parent, "memory.oom.group", "1")) + goto cleanup; + + cg_run_nowait(parent, alloc_anon_noexit, (void *) MB(60)); + cg_run_nowait(child, alloc_anon_noexit, (void *) MB(1)); + cg_run_nowait(child, alloc_anon_noexit, (void *) MB(1)); + + if (!cg_run(child, alloc_anon, (void *)MB(100))) + goto cleanup; + + if (cg_test_proc_killed(child)) + goto cleanup; + if (cg_test_proc_killed(parent)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (child) + cg_destroy(child); + if (parent) + cg_destroy(parent); + free(child); + free(parent); + + return ret; +} + +/* + * This test disables swapping and tries to allocate anonymous memory + * up to OOM with memory.group.oom set. Then it checks that all + * processes were killed except those set with OOM_SCORE_ADJ_MIN + */ +static int test_memcg_oom_group_score_events(const char *root) +{ + int ret = KSFT_FAIL; + char *memcg; + int safe_pid; + + memcg = cg_name(root, "memcg_test_0"); + + if (!memcg) + goto cleanup; + + if (cg_create(memcg)) + goto cleanup; + + if (cg_write(memcg, "memory.max", "50M")) + goto cleanup; + + if (cg_write(memcg, "memory.swap.max", "0")) + goto cleanup; + + if (cg_write(memcg, "memory.oom.group", "1")) + goto cleanup; + + safe_pid = cg_run_nowait(memcg, alloc_anon_noexit, (void *) MB(1)); + if (set_oom_adj_score(safe_pid, OOM_SCORE_ADJ_MIN)) + goto cleanup; + + cg_run_nowait(memcg, alloc_anon_noexit, (void *) MB(1)); + if (!cg_run(memcg, alloc_anon, (void *)MB(100))) + goto cleanup; + + if (cg_read_key_long(memcg, "memory.events", "oom_kill ") != 3) + goto cleanup; + + if (kill(safe_pid, SIGKILL)) + goto cleanup; + + ret = KSFT_PASS; + +cleanup: + if (memcg) + cg_destroy(memcg); + free(memcg); + + return ret; +} + + #define T(x) { x, #x } struct memcg_test { int (*fn)(const char *root); @@ -978,6 +1180,9 @@ struct memcg_test { T(test_memcg_oom_events), T(test_memcg_swap_max), T(test_memcg_sock), + T(test_memcg_oom_group_leaf_events), + T(test_memcg_oom_group_parent_events), + T(test_memcg_oom_group_score_events), }; #undef T -- cgit v1.2.3-59-g8ed1b From 493626f2d87a74e6dbea1686499ed6e7e600484e Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 9 Sep 2018 22:25:12 +0900 Subject: ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping When executing 'fw_run_transaction()' with 'TCODE_WRITE_BLOCK_REQUEST', an address of 'payload' argument is used for streaming DMA mapping by 'firewire_ohci' module if 'size' argument is larger than 8 byte. Although in this case the address should not be on kernel stack, current implementation of ALSA bebob driver uses data in kernel stack for a cue to boot M-Audio devices. This often brings unexpected result, especially for a case of CONFIG_VMAP_STACK=y. This commit fixes the bug. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=201021 Reference: https://forum.manjaro.org/t/firewire-m-audio-410-driver-wont-load-firmware/51165 Fixes: a2b2a7798fb6('ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series') Cc: # v3.16+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/bebob/bebob_maudio.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/sound/firewire/bebob/bebob_maudio.c b/sound/firewire/bebob/bebob_maudio.c index bd55620c6a47..0c5a4cbb99ba 100644 --- a/sound/firewire/bebob/bebob_maudio.c +++ b/sound/firewire/bebob/bebob_maudio.c @@ -96,17 +96,13 @@ int snd_bebob_maudio_load_firmware(struct fw_unit *unit) struct fw_device *device = fw_parent_device(unit); int err, rcode; u64 date; - __le32 cues[3] = { - cpu_to_le32(MAUDIO_BOOTLOADER_CUE1), - cpu_to_le32(MAUDIO_BOOTLOADER_CUE2), - cpu_to_le32(MAUDIO_BOOTLOADER_CUE3) - }; + __le32 *cues; /* check date of software used to build */ err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE, &date, sizeof(u64)); if (err < 0) - goto end; + return err; /* * firmware version 5058 or later has date later than "20070401", but * 'date' is not null-terminated. @@ -114,20 +110,28 @@ int snd_bebob_maudio_load_firmware(struct fw_unit *unit) if (date < 0x3230303730343031LL) { dev_err(&unit->device, "Use firmware version 5058 or later\n"); - err = -ENOSYS; - goto end; + return -ENXIO; } + cues = kmalloc_array(3, sizeof(*cues), GFP_KERNEL); + if (!cues) + return -ENOMEM; + + cues[0] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE1); + cues[1] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE2); + cues[2] = cpu_to_le32(MAUDIO_BOOTLOADER_CUE3); + rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST, device->node_id, device->generation, device->max_speed, BEBOB_ADDR_REG_REQ, - cues, sizeof(cues)); + cues, 3 * sizeof(*cues)); + kfree(cues); if (rcode != RCODE_COMPLETE) { dev_err(&unit->device, "Failed to send a cue to load firmware\n"); err = -EIO; } -end: + return err; } -- cgit v1.2.3-59-g8ed1b From 36f3a6e02c143a7e9e4e143e416371f67bc1fae6 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Sun, 9 Sep 2018 22:25:52 +0900 Subject: ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() An allocated memory forgets to be released. Fixes: 76fdb3a9e13 ('ALSA: fireface: add support for Fireface 400') Cc: # 4.12+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/fireface/ff-protocol-ff400.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/firewire/fireface/ff-protocol-ff400.c b/sound/firewire/fireface/ff-protocol-ff400.c index ad7a0a32557d..64c3cb0fb926 100644 --- a/sound/firewire/fireface/ff-protocol-ff400.c +++ b/sound/firewire/fireface/ff-protocol-ff400.c @@ -146,6 +146,7 @@ static int ff400_switch_fetching_mode(struct snd_ff *ff, bool enable) { __le32 *reg; int i; + int err; reg = kcalloc(18, sizeof(__le32), GFP_KERNEL); if (reg == NULL) @@ -163,9 +164,11 @@ static int ff400_switch_fetching_mode(struct snd_ff *ff, bool enable) reg[i] = cpu_to_le32(0x00000001); } - return snd_fw_transaction(ff->unit, TCODE_WRITE_BLOCK_REQUEST, - FF400_FETCH_PCM_FRAMES, reg, - sizeof(__le32) * 18, 0); + err = snd_fw_transaction(ff->unit, TCODE_WRITE_BLOCK_REQUEST, + FF400_FETCH_PCM_FRAMES, reg, + sizeof(__le32) * 18, 0); + kfree(reg); + return err; } static void ff400_dump_sync_status(struct snd_ff *ff, -- cgit v1.2.3-59-g8ed1b From 2a665dba016d5493c7d826fec82b0cb643b30d42 Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Mon, 10 Sep 2018 13:36:30 +0530 Subject: ASoC: AMD: Ensure reset bit is cleared before configuring HW register descriptions says: "DMA Channel Reset...Software must confirm that this bit is cleared before reprogramming any of the channel configuration registers." There could be cases where dma stop errored out leaving dma channel in reset state. We need to ensure that before the start of another dma, channel is out of the reset state. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index e359938e3d7e..77b265bd0505 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -184,6 +185,24 @@ static void config_dma_descriptor_in_sram(void __iomem *acp_mmio, acp_reg_write(descr_info->xfer_val, acp_mmio, mmACP_SRBM_Targ_Idx_Data); } +static void pre_config_reset(void __iomem *acp_mmio, u16 ch_num) +{ + u32 dma_ctrl; + int ret; + + /* clear the reset bit */ + dma_ctrl = acp_reg_read(acp_mmio, mmACP_DMA_CNTL_0 + ch_num); + dma_ctrl &= ~ACP_DMA_CNTL_0__DMAChRst_MASK; + acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num); + /* check the reset bit before programming configuration registers */ + ret = readl_poll_timeout(acp_mmio + ((mmACP_DMA_CNTL_0 + ch_num) * 4), + dma_ctrl, + !(dma_ctrl & ACP_DMA_CNTL_0__DMAChRst_MASK), + 100, ACP_DMA_RESET_TIME); + if (ret < 0) + pr_err("Failed to clear reset of channel : %d\n", ch_num); +} + /* * Initialize the DMA descriptor information for transfer between * system memory <-> ACP SRAM @@ -236,6 +255,7 @@ static void set_acp_sysmem_dma_descriptors(void __iomem *acp_mmio, config_dma_descriptor_in_sram(acp_mmio, dma_dscr_idx, &dmadscr[i]); } + pre_config_reset(acp_mmio, ch); config_acp_dma_channel(acp_mmio, ch, dma_dscr_idx - 1, NUM_DSCRS_PER_CHANNEL, @@ -275,6 +295,7 @@ static void set_acp_to_i2s_dma_descriptors(void __iomem *acp_mmio, u32 size, config_dma_descriptor_in_sram(acp_mmio, dma_dscr_idx, &dmadscr[i]); } + pre_config_reset(acp_mmio, ch); /* Configure the DMA channel with the above descriptore */ config_acp_dma_channel(acp_mmio, ch, dma_dscr_idx - 1, NUM_DSCRS_PER_CHANNEL, -- cgit v1.2.3-59-g8ed1b From 21a268069203cc72d1b2990bc68386516fabc274 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 7 Sep 2018 16:29:54 +0200 Subject: mtd: rawnand: marvell: prevent harmless warnings Since the addition of WARN_ON() in nand_subop_get_data/addr_len() helpers, this driver will produce harmless warnings (mostly at probe) just because it always calls the nand_subop_get_data_len() helper in the parsing function (even on non-data instructions, where this value is meaningless and unneeded). Fix these warnings by deriving the length only when it is relevant. Fixes: 760c435e0f85 ("mtd: rawnand: make subop helpers return unsigned values") Signed-off-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/marvell_nand.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index 7af4d6213ee5..bc2ef5209783 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -1547,7 +1547,7 @@ static void marvell_nfc_parse_instructions(struct nand_chip *chip, for (op_id = 0; op_id < subop->ninstrs; op_id++) { unsigned int offset, naddrs; const u8 *addrs; - int len = nand_subop_get_data_len(subop, op_id); + int len; instr = &subop->instrs[op_id]; @@ -1593,6 +1593,7 @@ static void marvell_nfc_parse_instructions(struct nand_chip *chip, nfc_op->ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) | NDCB0_LEN_OVRD; + len = nand_subop_get_data_len(subop, op_id); nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH); } nfc_op->data_delay_ns = instr->delay_ns; @@ -1606,6 +1607,7 @@ static void marvell_nfc_parse_instructions(struct nand_chip *chip, nfc_op->ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW) | NDCB0_LEN_OVRD; + len = nand_subop_get_data_len(subop, op_id); nfc_op->ndcb[3] |= round_up(len, FIFO_DEPTH); } nfc_op->data_delay_ns = instr->delay_ns; -- cgit v1.2.3-59-g8ed1b From 90a3b7f8aba3011badacd6d8121e03aa24ac79d1 Mon Sep 17 00:00:00 2001 From: Sébastien Szymanski Date: Thu, 6 Sep 2018 11:16:00 +0200 Subject: ASoC: cs4265: fix MMTLR Data switch control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0 and not at address 0x0 bit 1. Fix this. Signed-off-by: Sébastien Szymanski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4265.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c index 275677de669f..407554175282 100644 --- a/sound/soc/codecs/cs4265.c +++ b/sound/soc/codecs/cs4265.c @@ -157,8 +157,8 @@ static const struct snd_kcontrol_new cs4265_snd_controls[] = { SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2, 3, 1, 0), SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum), - SOC_SINGLE("MMTLR Data Switch", 0, - 1, 1, 0), + SOC_SINGLE("MMTLR Data Switch", CS4265_SPDIF_CTL2, + 0, 1, 0), SOC_ENUM("Mono Channel Select", spdif_mono_select_enum), SND_SOC_BYTES("C Data Buffer", CS4265_C_DATA_BUFF, 24), }; -- cgit v1.2.3-59-g8ed1b From 49434c6c575d2008c0abbc93e615019f39e01252 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 8 Sep 2018 08:12:21 +0200 Subject: ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Signed-off-by: Willy Tarreau Cc: Jann Horn Cc: Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emufx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c index 90713741c2dc..6ebe817801ea 100644 --- a/sound/pci/emu10k1/emufx.c +++ b/sound/pci/emu10k1/emufx.c @@ -2540,7 +2540,7 @@ static int snd_emu10k1_fx8010_ioctl(struct snd_hwdep * hw, struct file *file, un emu->support_tlv = 1; return put_user(SNDRV_EMU10K1_VERSION, (int __user *)argp); case SNDRV_EMU10K1_IOCTL_INFO: - info = kmalloc(sizeof(*info), GFP_KERNEL); + info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; snd_emu10k1_fx8010_info(emu, info); -- cgit v1.2.3-59-g8ed1b From a318c2432218d3cd189ec8228b8a795666899c2a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 31 Aug 2018 14:34:02 +0200 Subject: mfd: da9063: Fix DT probing with constraints Commit 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") reordered the da9063_regulator_info[] array, but not the DA9063_ID_* regulator ids and not the da9063_matches[] array, because ids are used as indices in the array initializer. This mismatch between regulator id and da9063_regulator_info[] array index causes the driver probe to fail because constraints from DT are not applied to the correct regulator: da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50) DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22) This patch reorders the DA9063_ID_* as apparently intended, and with them the entries in the da90630_matches[] array. Fixes: 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") Signed-off-by: Philipp Zabel Reviewed-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Signed-off-by: Lee Jones --- include/linux/mfd/da9063/pdata.h | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/include/linux/mfd/da9063/pdata.h b/include/linux/mfd/da9063/pdata.h index 8a125701ef7b..50bed4f89c1a 100644 --- a/include/linux/mfd/da9063/pdata.h +++ b/include/linux/mfd/da9063/pdata.h @@ -21,7 +21,7 @@ /* * Regulator configuration */ -/* DA9063 regulator IDs */ +/* DA9063 and DA9063L regulator IDs */ enum { /* BUCKs */ DA9063_ID_BCORE1, @@ -37,18 +37,20 @@ enum { DA9063_ID_BMEM_BIO_MERGED, /* When two BUCKs are merged, they cannot be reused separately */ - /* LDOs */ + /* LDOs on both DA9063 and DA9063L */ + DA9063_ID_LDO3, + DA9063_ID_LDO7, + DA9063_ID_LDO8, + DA9063_ID_LDO9, + DA9063_ID_LDO11, + + /* DA9063-only LDOs */ DA9063_ID_LDO1, DA9063_ID_LDO2, - DA9063_ID_LDO3, DA9063_ID_LDO4, DA9063_ID_LDO5, DA9063_ID_LDO6, - DA9063_ID_LDO7, - DA9063_ID_LDO8, - DA9063_ID_LDO9, DA9063_ID_LDO10, - DA9063_ID_LDO11, }; /* Regulators platform data */ -- cgit v1.2.3-59-g8ed1b From 658d8cbd07dae22ccecf49399e18c609c4e85c53 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 25 Jul 2018 14:29:07 +0200 Subject: drm/vc4: Fix the "no scaling" case on multi-planar YUV formats When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul --- drivers/gpu/drm/vc4/vc4_plane.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index cfb50fedfa2b..a3275fa66b7b 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -297,6 +297,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], vc4_state->crtc_h); + vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && + vc4_state->y_scaling[0] == VC4_SCALING_NONE); + if (num_planes > 1) { vc4_state->is_yuv = true; @@ -312,24 +315,17 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_get_scaling_mode(vc4_state->src_h[1], vc4_state->crtc_h); - /* YUV conversion requires that scaling be enabled, - * even on a plane that's otherwise 1:1. Choose TPZ - * for simplicity. + /* YUV conversion requires that horizontal scaling be enabled, + * even on a plane that's otherwise 1:1. Looks like only PPF + * works in that case, so let's pick that one. */ - if (vc4_state->x_scaling[0] == VC4_SCALING_NONE) - vc4_state->x_scaling[0] = VC4_SCALING_TPZ; - if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) - vc4_state->y_scaling[0] = VC4_SCALING_TPZ; + if (vc4_state->is_unity) + vc4_state->x_scaling[0] = VC4_SCALING_PPF; } else { vc4_state->x_scaling[1] = VC4_SCALING_NONE; vc4_state->y_scaling[1] = VC4_SCALING_NONE; } - vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && - vc4_state->y_scaling[0] == VC4_SCALING_NONE && - vc4_state->x_scaling[1] == VC4_SCALING_NONE && - vc4_state->y_scaling[1] == VC4_SCALING_NONE); - /* No configuring scaling on the cursor plane, since it gets non-vblank-synced updates, and scaling requires requires LBM changes which have to be vblank-synced. @@ -672,7 +668,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane, vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5); } - if (!vc4_state->is_unity) { + if (vc4_state->x_scaling[0] != VC4_SCALING_NONE || + vc4_state->x_scaling[1] != VC4_SCALING_NONE || + vc4_state->y_scaling[0] != VC4_SCALING_NONE || + vc4_state->y_scaling[1] != VC4_SCALING_NONE) { /* LBM Base Address. */ if (vc4_state->y_scaling[0] != VC4_SCALING_NONE || vc4_state->y_scaling[1] != VC4_SCALING_NONE) { -- cgit v1.2.3-59-g8ed1b From 7eb33224572636248d5b6cfa1a6b2472207be5c4 Mon Sep 17 00:00:00 2001 From: zhong jiang Date: Sat, 4 Aug 2018 18:49:27 +0800 Subject: drm/pl111: Make sure of_device_id tables are NULL terminated We prefer to of_device_id tables are NULL terminated. So make vexpress_muxfpga_match is NULL terminated. Signed-off-by: zhong jiang Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/1533379767-15629-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Sean Paul --- drivers/gpu/drm/pl111/pl111_vexpress.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/pl111/pl111_vexpress.c b/drivers/gpu/drm/pl111/pl111_vexpress.c index a534b225e31b..5fa0441bb6df 100644 --- a/drivers/gpu/drm/pl111/pl111_vexpress.c +++ b/drivers/gpu/drm/pl111/pl111_vexpress.c @@ -111,7 +111,8 @@ static int vexpress_muxfpga_probe(struct platform_device *pdev) } static const struct of_device_id vexpress_muxfpga_match[] = { - { .compatible = "arm,vexpress-muxfpga", } + { .compatible = "arm,vexpress-muxfpga", }, + {} }; static struct platform_driver vexpress_muxfpga_driver = { -- cgit v1.2.3-59-g8ed1b From 3510e7a7f91088159bfc67e8abdc9f9e77d28870 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 27 Aug 2018 16:39:50 +0800 Subject: drm/sun4i: Remove R40 display pipeline compatibles Two patches from the R40 display pipeline support series weren't applied with the rest of the series. When they did get applied, the -rc6 deadline for drm-misc-next had past, so they didn't get into 4.19-rc1 with the rest of the series. However, the two patches are crucial in the parsing of the R40's display pipeline graph in the device tree. Without them, the driver crashes because it can't follow the odd graph structure. This patch removes the R40 compatibles from the sun4i-drm driver, effectively disabling DRM support for the R40 for one release cycle. This will prevent the driver from crashing upon probing. The compatibles should be reinstated for the next release. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180827083950.602-1-wens@csie.org Signed-off-by: Sean Paul --- drivers/gpu/drm/sun4i/sun4i_drv.c | 1 - drivers/gpu/drm/sun4i/sun8i_mixer.c | 24 ------------------------ drivers/gpu/drm/sun4i/sun8i_tcon_top.c | 1 - 3 files changed, 26 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index dd19d674055c..8b0cd08034e0 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -418,7 +418,6 @@ static const struct of_device_id sun4i_drv_of_table[] = { { .compatible = "allwinner,sun8i-a33-display-engine" }, { .compatible = "allwinner,sun8i-a83t-display-engine" }, { .compatible = "allwinner,sun8i-h3-display-engine" }, - { .compatible = "allwinner,sun8i-r40-display-engine" }, { .compatible = "allwinner,sun8i-v3s-display-engine" }, { .compatible = "allwinner,sun9i-a80-display-engine" }, { } diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c index fc3713608f78..cb65b0ed53fd 100644 --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c @@ -545,22 +545,6 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = { .vi_num = 1, }; -static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = { - .ccsc = 0, - .mod_rate = 297000000, - .scaler_mask = 0xf, - .ui_num = 3, - .vi_num = 1, -}; - -static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = { - .ccsc = 1, - .mod_rate = 297000000, - .scaler_mask = 0x3, - .ui_num = 1, - .vi_num = 1, -}; - static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = { .vi_num = 2, .ui_num = 1, @@ -582,14 +566,6 @@ static const struct of_device_id sun8i_mixer_of_table[] = { .compatible = "allwinner,sun8i-h3-de2-mixer-0", .data = &sun8i_h3_mixer0_cfg, }, - { - .compatible = "allwinner,sun8i-r40-de2-mixer-0", - .data = &sun8i_r40_mixer0_cfg, - }, - { - .compatible = "allwinner,sun8i-r40-de2-mixer-1", - .data = &sun8i_r40_mixer1_cfg, - }, { .compatible = "allwinner,sun8i-v3s-de2-mixer", .data = &sun8i_v3s_mixer_cfg, diff --git a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c index 55fe398d8290..d5240b777a8f 100644 --- a/drivers/gpu/drm/sun4i/sun8i_tcon_top.c +++ b/drivers/gpu/drm/sun4i/sun8i_tcon_top.c @@ -253,7 +253,6 @@ static int sun8i_tcon_top_remove(struct platform_device *pdev) /* sun4i_drv uses this list to check if a device node is a TCON TOP */ const struct of_device_id sun8i_tcon_top_of_table[] = { - { .compatible = "allwinner,sun8i-r40-tcon-top" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table); -- cgit v1.2.3-59-g8ed1b From fcb74da1eb8edd3a4ef9b9724f88ed709d684227 Mon Sep 17 00:00:00 2001 From: Emil Lundmark Date: Mon, 28 May 2018 16:27:11 +0200 Subject: drm: udl: Destroy framebuffer only if it was initialized MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a NULL pointer dereference that can happen if the UDL driver is unloaded before the framebuffer is initialized. This can happen e.g. if the USB device is unplugged right after it was plugged in. As explained by Stéphane Marchesin: It happens when fbdev is disabled (which is the case for Chrome OS). Even though intialization of the fbdev part is optional (it's done in udlfb_create which is the callback for fb_probe()), the teardown isn't optional (udl_driver_unload -> udl_fbdev_cleanup -> udl_fbdev_destroy). Note that udl_fbdev_cleanup *tries* to be conditional (you can see it does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is always set during udl_fbdev_init. Cc: stable@vger.kernel.org Suggested-by: Sean Paul Reviewed-by: Sean Paul Acked-by: Daniel Vetter Signed-off-by: Emil Lundmark Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org Signed-off-by: Sean Paul --- drivers/gpu/drm/udl/udl_fb.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index dbb62f6eb48a..dd9ffded223b 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -432,9 +432,11 @@ static void udl_fbdev_destroy(struct drm_device *dev, { drm_fb_helper_unregister_fbi(&ufbdev->helper); drm_fb_helper_fini(&ufbdev->helper); - drm_framebuffer_unregister_private(&ufbdev->ufb.base); - drm_framebuffer_cleanup(&ufbdev->ufb.base); - drm_gem_object_put_unlocked(&ufbdev->ufb.obj->base); + if (ufbdev->ufb.obj) { + drm_framebuffer_unregister_private(&ufbdev->ufb.base); + drm_framebuffer_cleanup(&ufbdev->ufb.base); + drm_gem_object_put_unlocked(&ufbdev->ufb.obj->base); + } } int udl_fbdev_init(struct drm_device *dev) -- cgit v1.2.3-59-g8ed1b From affab51082174f60ef71ced8ab5fbe71f00e9ae3 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 10 Sep 2018 13:01:52 -0500 Subject: platform/x86: dell-smbios-wmi: Correct a memory leak ACPI buffers were being allocated but never freed. Reported-by: Pinzhen Xu Signed-off-by: Mario Limonciello Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/dell-smbios-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell-smbios-wmi.c index 88afe5651d24..cf2229ece9ff 100644 --- a/drivers/platform/x86/dell-smbios-wmi.c +++ b/drivers/platform/x86/dell-smbios-wmi.c @@ -78,6 +78,7 @@ static int run_smbios_call(struct wmi_device *wdev) dev_dbg(&wdev->dev, "result: [%08x,%08x,%08x,%08x]\n", priv->buf->std.output[0], priv->buf->std.output[1], priv->buf->std.output[2], priv->buf->std.output[3]); + kfree(output.pointer); return 0; } -- cgit v1.2.3-59-g8ed1b From ff0e9f26288d2daee4950f42b37a3d3d30d36ec1 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Mon, 10 Sep 2018 13:01:53 -0500 Subject: platform/x86: alienware-wmi: Correct a memory leak An ACPI buffer that was allocated was not being freed after use. Signed-off-by: Mario Limonciello Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) --- drivers/platform/x86/alienware-wmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/alienware-wmi.c b/drivers/platform/x86/alienware-wmi.c index d975462a4c57..f10af5c383c5 100644 --- a/drivers/platform/x86/alienware-wmi.c +++ b/drivers/platform/x86/alienware-wmi.c @@ -536,6 +536,7 @@ static acpi_status alienware_wmax_command(struct wmax_basic_args *in_args, if (obj && obj->type == ACPI_TYPE_INTEGER) *out_data = (u32) obj->integer.value; } + kfree(output.pointer); return status; } -- cgit v1.2.3-59-g8ed1b From 94f14e4728125f979629b2b020d31cd718191626 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 11 Sep 2018 14:10:12 +0300 Subject: Bluetooth: SMP: Fix trying to use non-existent local OOB data A remote device may claim that it has received our OOB data, even though we never geneated it. Add a new flag to track whether we actually have OOB data, and ignore the remote peer's flag if haven't generated OOB data. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index ae91e2d40056..9752879fdd3a 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -83,6 +83,7 @@ enum { struct smp_dev { /* Secure Connections OOB data */ + bool local_oob; u8 local_pk[64]; u8 local_rand[16]; bool debug_key; @@ -599,6 +600,8 @@ int smp_generate_oob(struct hci_dev *hdev, u8 hash[16], u8 rand[16]) memcpy(rand, smp->local_rand, 16); + smp->local_oob = true; + return 0; } @@ -1785,7 +1788,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) * successfully received our local OOB data - therefore set the * flag to indicate that local OOB is in use. */ - if (req->oob_flag == SMP_OOB_PRESENT) + if (req->oob_flag == SMP_OOB_PRESENT && SMP_DEV(hdev)->local_oob) set_bit(SMP_FLAG_LOCAL_OOB, &smp->flags); /* SMP over BR/EDR requires special treatment */ @@ -1967,7 +1970,7 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb) * successfully received our local OOB data - therefore set the * flag to indicate that local OOB is in use. */ - if (rsp->oob_flag == SMP_OOB_PRESENT) + if (rsp->oob_flag == SMP_OOB_PRESENT && SMP_DEV(hdev)->local_oob) set_bit(SMP_FLAG_LOCAL_OOB, &smp->flags); smp->prsp[0] = SMP_CMD_PAIRING_RSP; @@ -3230,6 +3233,7 @@ static struct l2cap_chan *smp_add_cid(struct hci_dev *hdev, u16 cid) return ERR_CAST(tfm_ecdh); } + smp->local_oob = false; smp->tfm_aes = tfm_aes; smp->tfm_cmac = tfm_cmac; smp->tfm_ecdh = tfm_ecdh; -- cgit v1.2.3-59-g8ed1b From 4ba5175f2c10affd412fa41855cecda02b66cd71 Mon Sep 17 00:00:00 2001 From: Matias Karhumaa Date: Tue, 11 Sep 2018 14:10:13 +0300 Subject: Bluetooth: Use correct tfm to generate OOB data In case local OOB data was generated and other device initiated pairing claiming that it has got OOB data, following crash occurred: [ 222.847853] general protection fault: 0000 [#1] SMP PTI [ 222.848025] CPU: 1 PID: 42 Comm: kworker/u5:0 Tainted: G C 4.18.0-custom #4 [ 222.848158] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 222.848307] Workqueue: hci0 hci_rx_work [bluetooth] [ 222.848416] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth] [ 222.848540] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48 [ 222.848914] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293 [ 222.849021] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a [ 222.849111] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800 [ 222.849192] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800 [ 222.849269] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00 [ 222.849350] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101 [ 222.849429] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000 [ 222.849518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 222.849586] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0 [ 222.849671] Call Trace: [ 222.849745] ? sc_send_public_key+0x110/0x2a0 [bluetooth] [ 222.849825] ? sc_send_public_key+0x115/0x2a0 [bluetooth] [ 222.849925] smp_recv_cb+0x959/0x2490 [bluetooth] [ 222.850023] ? _cond_resched+0x19/0x40 [ 222.850105] ? mutex_lock+0x12/0x40 [ 222.850202] l2cap_recv_frame+0x109d/0x3420 [bluetooth] [ 222.850315] ? l2cap_recv_frame+0x109d/0x3420 [bluetooth] [ 222.850426] ? __switch_to_asm+0x34/0x70 [ 222.850515] ? __switch_to_asm+0x40/0x70 [ 222.850625] ? __switch_to_asm+0x34/0x70 [ 222.850724] ? __switch_to_asm+0x40/0x70 [ 222.850786] ? __switch_to_asm+0x34/0x70 [ 222.850846] ? __switch_to_asm+0x40/0x70 [ 222.852581] ? __switch_to_asm+0x34/0x70 [ 222.854976] ? __switch_to_asm+0x40/0x70 [ 222.857475] ? __switch_to_asm+0x40/0x70 [ 222.859775] ? __switch_to_asm+0x34/0x70 [ 222.861218] ? __switch_to_asm+0x40/0x70 [ 222.862327] ? __switch_to_asm+0x34/0x70 [ 222.863758] l2cap_recv_acldata+0x266/0x3c0 [bluetooth] [ 222.865122] hci_rx_work+0x1c9/0x430 [bluetooth] [ 222.867144] process_one_work+0x210/0x4c0 [ 222.868248] worker_thread+0x41/0x4d0 [ 222.869420] kthread+0x141/0x160 [ 222.870694] ? process_one_work+0x4c0/0x4c0 [ 222.871668] ? kthread_create_worker_on_cpu+0x90/0x90 [ 222.872896] ret_from_fork+0x35/0x40 [ 222.874132] Modules linked in: algif_hash algif_skcipher af_alg rfcomm bnep btusb btrtl btbcm btintel snd_intel8x0 cmac intel_rapl_perf vboxvideo(C) snd_ac97_codec bluetooth ac97_bus joydev ttm snd_pcm ecdh_generic drm_kms_helper snd_timer snd input_leds drm serio_raw fb_sys_fops soundcore syscopyarea sysfillrect sysimgblt mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci psmouse libahci i2c_piix4 video e1000 pata_acpi [ 222.883153] fbcon_switch: detected unhandled fb_set_par error, error code -16 [ 222.886774] fbcon_switch: detected unhandled fb_set_par error, error code -16 [ 222.890503] ---[ end trace 6504aa7a777b5316 ]--- [ 222.890541] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth] [ 222.890551] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48 [ 222.890555] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293 [ 222.890561] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a [ 222.890565] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800 [ 222.890571] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800 [ 222.890576] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00 [ 222.890581] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101 [ 222.890586] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000 [ 222.890591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 222.890594] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0 This commit fixes a bug where invalid pointer to crypto tfm was used for SMP SC ECDH calculation when OOB was in use. Solution is to use same crypto tfm than when generating OOB material on generate_oob() function. This bug was introduced in commit c0153b0b901a ("Bluetooth: let the crypto subsystem generate the ecc privkey"). Bug was found by fuzzing kernel SMP implementation using Synopsys Defensics. Signed-off-by: Matias Karhumaa Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 9752879fdd3a..3a7b0773536b 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -2700,7 +2700,13 @@ static int smp_cmd_public_key(struct l2cap_conn *conn, struct sk_buff *skb) * key was set/generated. */ if (test_bit(SMP_FLAG_LOCAL_OOB, &smp->flags)) { - struct smp_dev *smp_dev = chan->data; + struct l2cap_chan *hchan = hdev->smp_data; + struct smp_dev *smp_dev; + + if (!hchan || !hchan->data) + return SMP_UNSPECIFIED; + + smp_dev = hchan->data; tfm_ecdh = smp_dev->tfm_ecdh; } else { -- cgit v1.2.3-59-g8ed1b From e6a57d22f787e73635ce0d29eef0abb77928b3e9 Mon Sep 17 00:00:00 2001 From: Hermes Zhang Date: Tue, 28 Aug 2018 09:48:30 +0800 Subject: Bluetooth: hci_ldisc: Free rw_semaphore on close The percpu_rw_semaphore is not currently freed, and this leads to a crash when the stale rcu callback is invoked. DEBUG_OBJECTS detects this. ODEBUG: free active (active state 1) object type: rcu_head hint: (null) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2024 at debug_print_object+0xac/0xc8 PC is at debug_print_object+0xac/0xc8 LR is at debug_print_object+0xac/0xc8 Call trace: [] debug_print_object+0xac/0xc8 [] debug_check_no_obj_freed+0x1e8/0x228 [] kfree+0x1cc/0x250 [] hci_uart_tty_close+0x54/0x108 [] tty_ldisc_close.isra.1+0x40/0x58 [] tty_ldisc_kill+0x1c/0x40 [] tty_ldisc_release+0x94/0x170 [] tty_release_struct+0x1c/0x58 [] tty_release+0x3b0/0x490 [] __fput+0x88/0x1d0 [] ____fput+0xc/0x18 [] task_work_run+0x9c/0xc0 [] do_exit+0x24c/0x8a0 [] do_group_exit+0x38/0xa0 [] __wake_up_parent+0x0/0x28 [] el0_svc_naked+0x34/0x38 ---[ end trace bfe08cbd89098cdf ]--- Signed-off-by: Hermes Zhang Signed-off-by: Marcel Holtmann --- drivers/bluetooth/hci_ldisc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 963bb0309e25..ea6238ed5c0e 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -543,6 +543,8 @@ static void hci_uart_tty_close(struct tty_struct *tty) } clear_bit(HCI_UART_PROTO_SET, &hu->flags); + percpu_free_rwsem(&hu->proto_lock); + kfree(hu); } -- cgit v1.2.3-59-g8ed1b From 9f34519a82356f6cf0ccb8480ee0ed99b3d0af75 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 31 Aug 2018 11:52:00 -0700 Subject: cxgb4: fix abort_req_rss6 struct Remove the incorrect WR_HDR field which can cause a misinterpretation of ABORT CPL by ULDs, such as iw_cxgb4. Fixes: a3cdaa69e4ae ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/net/ethernet/chelsio/cxgb4/t4_msg.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h index b8f75a22fb6c..f152da1ce046 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h @@ -753,7 +753,6 @@ struct cpl_abort_req_rss { }; struct cpl_abort_req_rss6 { - WR_HDR; union opcode_tid ot; __be32 srqidx_status; }; -- cgit v1.2.3-59-g8ed1b From 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 25 Apr 2018 07:29:22 -0700 Subject: mfd: omap-usb-host: Fix dts probe of children It currently only works if the parent bus uses "simple-bus". We currently try to probe children with non-existing compatible values. And we're missing .probe. I noticed this while testing devices configured to probe using ti-sysc interconnect target module driver. For that we also may want to rebind the driver, so let's remove __init and __exit. Signed-off-by: Tony Lindgren Acked-by: Roger Quadros Signed-off-by: Lee Jones --- drivers/mfd/omap-usb-host.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index e11ab12fbdf2..800986a79704 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -528,8 +528,8 @@ static int usbhs_omap_get_dt_pdata(struct device *dev, } static const struct of_device_id usbhs_child_match_table[] = { - { .compatible = "ti,omap-ehci", }, - { .compatible = "ti,omap-ohci", }, + { .compatible = "ti,ehci-omap", }, + { .compatible = "ti,ohci-omap3", }, { } }; @@ -855,6 +855,7 @@ static struct platform_driver usbhs_omap_driver = { .pm = &usbhsomap_dev_pm_ops, .of_match_table = usbhs_omap_dt_ids, }, + .probe = usbhs_omap_probe, .remove = usbhs_omap_remove, }; @@ -864,9 +865,9 @@ MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); -static int __init omap_usbhs_drvinit(void) +static int omap_usbhs_drvinit(void) { - return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); + return platform_driver_register(&usbhs_omap_driver); } /* @@ -878,7 +879,7 @@ static int __init omap_usbhs_drvinit(void) */ fs_initcall_sync(omap_usbhs_drvinit); -static void __exit omap_usbhs_drvexit(void) +static void omap_usbhs_drvexit(void) { platform_driver_unregister(&usbhs_omap_driver); } -- cgit v1.2.3-59-g8ed1b From b1f382178d150f256c1cf95b9341fda6eb764459 Mon Sep 17 00:00:00 2001 From: Ross Zwisler Date: Tue, 11 Sep 2018 13:31:16 -0400 Subject: ext4: close race between direct IO and ext4_break_layouts() If the refcount of a page is lowered between the time that it is returned by dax_busy_page() and when the refcount is again checked in ext4_break_layouts() => ___wait_var_event(), the waiting function ext4_wait_dax_page() will never be called. This means that ext4_break_layouts() will still have 'retry' set to false, so we'll stop looping and never check the refcount of other pages in this inode. Instead, always continue looping as long as dax_layout_busy_page() gives us a page which it found with an elevated refcount. Signed-off-by: Ross Zwisler Reviewed-by: Jan Kara Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/inode.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 694f31364206..723058bfe43b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4195,9 +4195,8 @@ int ext4_update_disksize_before_punch(struct inode *inode, loff_t offset, return 0; } -static void ext4_wait_dax_page(struct ext4_inode_info *ei, bool *did_unlock) +static void ext4_wait_dax_page(struct ext4_inode_info *ei) { - *did_unlock = true; up_write(&ei->i_mmap_sem); schedule(); down_write(&ei->i_mmap_sem); @@ -4207,14 +4206,12 @@ int ext4_break_layouts(struct inode *inode) { struct ext4_inode_info *ei = EXT4_I(inode); struct page *page; - bool retry; int error; if (WARN_ON_ONCE(!rwsem_is_locked(&ei->i_mmap_sem))) return -EINVAL; do { - retry = false; page = dax_layout_busy_page(inode->i_mapping); if (!page) return 0; @@ -4222,8 +4219,8 @@ int ext4_break_layouts(struct inode *inode) error = ___wait_var_event(&page->_refcount, atomic_read(&page->_refcount) == 1, TASK_INTERRUPTIBLE, 0, 0, - ext4_wait_dax_page(ei, &retry)); - } while (error == 0 && retry); + ext4_wait_dax_page(ei)); + } while (error == 0); return error; } -- cgit v1.2.3-59-g8ed1b From 425333bf3a7743715c17e503049d0837d6c4a603 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Mon, 10 Sep 2018 18:29:07 +1000 Subject: KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode At the moment the real mode handler of H_PUT_TCE calls iommu_tce_xchg_rm() which in turn reads the old TCE and if it was a valid entry, marks the physical page dirty if it was mapped for writing. Since it is in real mode, realmode_pfn_to_page() is used instead of pfn_to_page() to get the page struct. However SetPageDirty() itself reads the compound page head and returns a virtual address for the head page struct and setting dirty bit for that kills the system. This adds additional dirty bit tracking into the MM/IOMMU API for use in the real mode. Note that this does not change how VFIO and KVM (in virtual mode) set this bit. The KVM (real mode) changes include: - use the lowest bit of the cached host phys address to carry the dirty bit; - mark pages dirty when they are unpinned which happens when the preregistered memory is released which always happens in virtual mode; - add mm_iommu_ua_mark_dirty_rm() helper to set delayed dirty bit; - change iommu_tce_xchg_rm() to take the kvm struct for the mm to use in the new mm_iommu_ua_mark_dirty_rm() helper; - move iommu_tce_xchg_rm() to book3s_64_vio_hv.c (which is the only caller anyway) to reduce the real mode KVM and IOMMU knowledge across different subsystems. This removes realmode_pfn_to_page() as it is not used anymore. While we at it, remove some EXPORT_SYMBOL_GPL() as that code is for the real mode only and modules cannot call it anyway. Signed-off-by: Alexey Kardashevskiy Reviewed-by: David Gibson Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/book3s/64/pgtable.h | 1 - arch/powerpc/include/asm/iommu.h | 2 -- arch/powerpc/include/asm/mmu_context.h | 1 + arch/powerpc/kernel/iommu.c | 25 -------------- arch/powerpc/kvm/book3s_64_vio_hv.c | 39 +++++++++++++++++----- arch/powerpc/mm/init_64.c | 49 ---------------------------- arch/powerpc/mm/mmu_context_iommu.c | 34 ++++++++++++++++--- 7 files changed, 62 insertions(+), 89 deletions(-) diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 13a688fc8cd0..2fdc865ca374 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -1051,7 +1051,6 @@ static inline void vmemmap_remove_mapping(unsigned long start, return hash__vmemmap_remove_mapping(start, page_size); } #endif -struct page *realmode_pfn_to_page(unsigned long pfn); static inline pte_t pmd_pte(pmd_t pmd) { diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index ab3a4fba38e3..3d4b88cb8599 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -220,8 +220,6 @@ extern void iommu_del_device(struct device *dev); extern int __init tce_iommu_bus_notifier_init(void); extern long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry, unsigned long *hpa, enum dma_data_direction *direction); -extern long iommu_tce_xchg_rm(struct iommu_table *tbl, unsigned long entry, - unsigned long *hpa, enum dma_data_direction *direction); #else static inline void iommu_register_group(struct iommu_table_group *table_group, int pci_domain_number, diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index b2f89b621b15..b694d6af1150 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -38,6 +38,7 @@ extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, unsigned long ua, unsigned int pageshift, unsigned long *hpa); extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, unsigned long ua, unsigned int pageshift, unsigned long *hpa); +extern void mm_iommu_ua_mark_dirty_rm(struct mm_struct *mm, unsigned long ua); extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem); extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem); #endif diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index af7a20dc6e09..19b4c628f3be 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1013,31 +1013,6 @@ long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry, } EXPORT_SYMBOL_GPL(iommu_tce_xchg); -#ifdef CONFIG_PPC_BOOK3S_64 -long iommu_tce_xchg_rm(struct iommu_table *tbl, unsigned long entry, - unsigned long *hpa, enum dma_data_direction *direction) -{ - long ret; - - ret = tbl->it_ops->exchange_rm(tbl, entry, hpa, direction); - - if (!ret && ((*direction == DMA_FROM_DEVICE) || - (*direction == DMA_BIDIRECTIONAL))) { - struct page *pg = realmode_pfn_to_page(*hpa >> PAGE_SHIFT); - - if (likely(pg)) { - SetPageDirty(pg); - } else { - tbl->it_ops->exchange_rm(tbl, entry, hpa, direction); - ret = -EFAULT; - } - } - - return ret; -} -EXPORT_SYMBOL_GPL(iommu_tce_xchg_rm); -#endif - int iommu_take_ownership(struct iommu_table *tbl) { unsigned long flags, i, sz = (tbl->it_size + 7) >> 3; diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index 506a4d400458..6821ead4b4eb 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -187,12 +187,35 @@ long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa, EXPORT_SYMBOL_GPL(kvmppc_gpa_to_ua); #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE -static void kvmppc_rm_clear_tce(struct iommu_table *tbl, unsigned long entry) +static long iommu_tce_xchg_rm(struct mm_struct *mm, struct iommu_table *tbl, + unsigned long entry, unsigned long *hpa, + enum dma_data_direction *direction) +{ + long ret; + + ret = tbl->it_ops->exchange_rm(tbl, entry, hpa, direction); + + if (!ret && ((*direction == DMA_FROM_DEVICE) || + (*direction == DMA_BIDIRECTIONAL))) { + __be64 *pua = IOMMU_TABLE_USERSPACE_ENTRY_RM(tbl, entry); + /* + * kvmppc_rm_tce_iommu_do_map() updates the UA cache after + * calling this so we still get here a valid UA. + */ + if (pua && *pua) + mm_iommu_ua_mark_dirty_rm(mm, be64_to_cpu(*pua)); + } + + return ret; +} + +static void kvmppc_rm_clear_tce(struct kvm *kvm, struct iommu_table *tbl, + unsigned long entry) { unsigned long hpa = 0; enum dma_data_direction dir = DMA_NONE; - iommu_tce_xchg_rm(tbl, entry, &hpa, &dir); + iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir); } static long kvmppc_rm_tce_iommu_mapped_dec(struct kvm *kvm, @@ -224,7 +247,7 @@ static long kvmppc_rm_tce_iommu_do_unmap(struct kvm *kvm, unsigned long hpa = 0; long ret; - if (iommu_tce_xchg_rm(tbl, entry, &hpa, &dir)) + if (iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir)) /* * real mode xchg can fail if struct page crosses * a page boundary @@ -236,7 +259,7 @@ static long kvmppc_rm_tce_iommu_do_unmap(struct kvm *kvm, ret = kvmppc_rm_tce_iommu_mapped_dec(kvm, tbl, entry); if (ret) - iommu_tce_xchg_rm(tbl, entry, &hpa, &dir); + iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir); return ret; } @@ -282,7 +305,7 @@ static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl, if (WARN_ON_ONCE_RM(mm_iommu_mapped_inc(mem))) return H_CLOSED; - ret = iommu_tce_xchg_rm(tbl, entry, &hpa, &dir); + ret = iommu_tce_xchg_rm(kvm->mm, tbl, entry, &hpa, &dir); if (ret) { mm_iommu_mapped_dec(mem); /* @@ -371,7 +394,7 @@ long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn, return ret; WARN_ON_ONCE_RM(1); - kvmppc_rm_clear_tce(stit->tbl, entry); + kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry); } kvmppc_tce_put(stt, entry, tce); @@ -520,7 +543,7 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu, goto unlock_exit; WARN_ON_ONCE_RM(1); - kvmppc_rm_clear_tce(stit->tbl, entry); + kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry); } kvmppc_tce_put(stt, entry + i, tce); @@ -571,7 +594,7 @@ long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu, return ret; WARN_ON_ONCE_RM(1); - kvmppc_rm_clear_tce(stit->tbl, entry); + kvmppc_rm_clear_tce(vcpu->kvm, stit->tbl, entry); } } diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 51ce091914f9..7a9886f98b0c 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -308,55 +308,6 @@ void register_page_bootmem_memmap(unsigned long section_nr, { } -/* - * We do not have access to the sparsemem vmemmap, so we fallback to - * walking the list of sparsemem blocks which we already maintain for - * the sake of crashdump. In the long run, we might want to maintain - * a tree if performance of that linear walk becomes a problem. - * - * realmode_pfn_to_page functions can fail due to: - * 1) As real sparsemem blocks do not lay in RAM continously (they - * are in virtual address space which is not available in the real mode), - * the requested page struct can be split between blocks so get_page/put_page - * may fail. - * 2) When huge pages are used, the get_page/put_page API will fail - * in real mode as the linked addresses in the page struct are virtual - * too. - */ -struct page *realmode_pfn_to_page(unsigned long pfn) -{ - struct vmemmap_backing *vmem_back; - struct page *page; - unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift; - unsigned long pg_va = (unsigned long) pfn_to_page(pfn); - - for (vmem_back = vmemmap_list; vmem_back; vmem_back = vmem_back->list) { - if (pg_va < vmem_back->virt_addr) - continue; - - /* After vmemmap_list entry free is possible, need check all */ - if ((pg_va + sizeof(struct page)) <= - (vmem_back->virt_addr + page_size)) { - page = (struct page *) (vmem_back->phys + pg_va - - vmem_back->virt_addr); - return page; - } - } - - /* Probably that page struct is split between real pages */ - return NULL; -} -EXPORT_SYMBOL_GPL(realmode_pfn_to_page); - -#else - -struct page *realmode_pfn_to_page(unsigned long pfn) -{ - struct page *page = pfn_to_page(pfn); - return page; -} -EXPORT_SYMBOL_GPL(realmode_pfn_to_page); - #endif /* CONFIG_SPARSEMEM_VMEMMAP */ #ifdef CONFIG_PPC_BOOK3S_64 diff --git a/arch/powerpc/mm/mmu_context_iommu.c b/arch/powerpc/mm/mmu_context_iommu.c index c9ee9e23845f..56c2234cc6ae 100644 --- a/arch/powerpc/mm/mmu_context_iommu.c +++ b/arch/powerpc/mm/mmu_context_iommu.c @@ -18,11 +18,15 @@ #include #include #include +#include #include #include static DEFINE_MUTEX(mem_list_mutex); +#define MM_IOMMU_TABLE_GROUP_PAGE_DIRTY 0x1 +#define MM_IOMMU_TABLE_GROUP_PAGE_MASK ~(SZ_4K - 1) + struct mm_iommu_table_group_mem_t { struct list_head next; struct rcu_head rcu; @@ -263,6 +267,9 @@ static void mm_iommu_unpin(struct mm_iommu_table_group_mem_t *mem) if (!page) continue; + if (mem->hpas[i] & MM_IOMMU_TABLE_GROUP_PAGE_DIRTY) + SetPageDirty(page); + put_page(page); mem->hpas[i] = 0; } @@ -360,7 +367,6 @@ struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm(struct mm_struct *mm, return ret; } -EXPORT_SYMBOL_GPL(mm_iommu_lookup_rm); struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm, unsigned long ua, unsigned long entries) @@ -390,7 +396,7 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, if (pageshift > mem->pageshift) return -EFAULT; - *hpa = *va | (ua & ~PAGE_MASK); + *hpa = (*va & MM_IOMMU_TABLE_GROUP_PAGE_MASK) | (ua & ~PAGE_MASK); return 0; } @@ -413,11 +419,31 @@ long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, if (!pa) return -EFAULT; - *hpa = *pa | (ua & ~PAGE_MASK); + *hpa = (*pa & MM_IOMMU_TABLE_GROUP_PAGE_MASK) | (ua & ~PAGE_MASK); return 0; } -EXPORT_SYMBOL_GPL(mm_iommu_ua_to_hpa_rm); + +extern void mm_iommu_ua_mark_dirty_rm(struct mm_struct *mm, unsigned long ua) +{ + struct mm_iommu_table_group_mem_t *mem; + long entry; + void *va; + unsigned long *pa; + + mem = mm_iommu_lookup_rm(mm, ua, PAGE_SIZE); + if (!mem) + return; + + entry = (ua - mem->ua) >> PAGE_SHIFT; + va = &mem->hpas[entry]; + + pa = (void *) vmalloc_to_phys(va); + if (!pa) + return; + + *pa |= MM_IOMMU_TABLE_GROUP_PAGE_DIRTY; +} long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem) { -- cgit v1.2.3-59-g8ed1b From 71d29f43b6332badc5598c656616a62575e83342 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 11 Sep 2018 20:48:34 +1000 Subject: KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size THP paths can defer splitting compound pages until after the actual remap and TLB flushes to split a huge PMD/PUD. This causes radix partition scope page table mappings to get out of synch with the host qemu page table mappings. This results in random memory corruption in the guest when running with THP. The easiest way to reproduce is use KVM balloon to free up a lot of memory in the guest and then shrink the balloon to give the memory back, while some work is being done in the guest. Cc: David Gibson Cc: "Aneesh Kumar K.V" Cc: kvm-ppc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Nicholas Piggin Signed-off-by: Paul Mackerras --- arch/powerpc/kvm/book3s_64_mmu_radix.c | 91 ++++++++++++++-------------------- 1 file changed, 37 insertions(+), 54 deletions(-) diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c index fd6e8c13685f..933c574e1cf7 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_radix.c +++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c @@ -525,8 +525,8 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, unsigned long ea, unsigned long dsisr) { struct kvm *kvm = vcpu->kvm; - unsigned long mmu_seq, pte_size; - unsigned long gpa, gfn, hva, pfn; + unsigned long mmu_seq; + unsigned long gpa, gfn, hva; struct kvm_memory_slot *memslot; struct page *page = NULL; long ret; @@ -623,9 +623,10 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, */ hva = gfn_to_hva_memslot(memslot, gfn); if (upgrade_p && __get_user_pages_fast(hva, 1, 1, &page) == 1) { - pfn = page_to_pfn(page); upgrade_write = true; } else { + unsigned long pfn; + /* Call KVM generic code to do the slow-path check */ pfn = __gfn_to_pfn_memslot(memslot, gfn, false, NULL, writing, upgrade_p); @@ -639,63 +640,45 @@ int kvmppc_book3s_radix_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, } } - /* See if we can insert a 1GB or 2MB large PTE here */ - level = 0; - if (page && PageCompound(page)) { - pte_size = PAGE_SIZE << compound_order(compound_head(page)); - if (pte_size >= PUD_SIZE && - (gpa & (PUD_SIZE - PAGE_SIZE)) == - (hva & (PUD_SIZE - PAGE_SIZE))) { - level = 2; - pfn &= ~((PUD_SIZE >> PAGE_SHIFT) - 1); - } else if (pte_size >= PMD_SIZE && - (gpa & (PMD_SIZE - PAGE_SIZE)) == - (hva & (PMD_SIZE - PAGE_SIZE))) { - level = 1; - pfn &= ~((PMD_SIZE >> PAGE_SHIFT) - 1); - } - } - /* - * Compute the PTE value that we need to insert. + * Read the PTE from the process' radix tree and use that + * so we get the shift and attribute bits. */ - if (page) { - pgflags = _PAGE_READ | _PAGE_EXEC | _PAGE_PRESENT | _PAGE_PTE | - _PAGE_ACCESSED; - if (writing || upgrade_write) - pgflags |= _PAGE_WRITE | _PAGE_DIRTY; - pte = pfn_pte(pfn, __pgprot(pgflags)); + local_irq_disable(); + ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift); + pte = *ptep; + local_irq_enable(); + + /* Get pte level from shift/size */ + if (shift == PUD_SHIFT && + (gpa & (PUD_SIZE - PAGE_SIZE)) == + (hva & (PUD_SIZE - PAGE_SIZE))) { + level = 2; + } else if (shift == PMD_SHIFT && + (gpa & (PMD_SIZE - PAGE_SIZE)) == + (hva & (PMD_SIZE - PAGE_SIZE))) { + level = 1; } else { - /* - * Read the PTE from the process' radix tree and use that - * so we get the attribute bits. - */ - local_irq_disable(); - ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift); - pte = *ptep; - local_irq_enable(); - if (shift == PUD_SHIFT && - (gpa & (PUD_SIZE - PAGE_SIZE)) == - (hva & (PUD_SIZE - PAGE_SIZE))) { - level = 2; - } else if (shift == PMD_SHIFT && - (gpa & (PMD_SIZE - PAGE_SIZE)) == - (hva & (PMD_SIZE - PAGE_SIZE))) { - level = 1; - } else if (shift && shift != PAGE_SHIFT) { - /* Adjust PFN */ - unsigned long mask = (1ul << shift) - PAGE_SIZE; - pte = __pte(pte_val(pte) | (hva & mask)); - } - pte = __pte(pte_val(pte) | _PAGE_EXEC | _PAGE_ACCESSED); - if (writing || upgrade_write) { - if (pte_val(pte) & _PAGE_WRITE) - pte = __pte(pte_val(pte) | _PAGE_DIRTY); - } else { - pte = __pte(pte_val(pte) & ~(_PAGE_WRITE | _PAGE_DIRTY)); + level = 0; + if (shift > PAGE_SHIFT) { + /* + * If the pte maps more than one page, bring over + * bits from the virtual address to get the real + * address of the specific single page we want. + */ + unsigned long rpnmask = (1ul << shift) - PAGE_SIZE; + pte = __pte(pte_val(pte) | (hva & rpnmask)); } } + pte = __pte(pte_val(pte) | _PAGE_EXEC | _PAGE_ACCESSED); + if (writing || upgrade_write) { + if (pte_val(pte) & _PAGE_WRITE) + pte = __pte(pte_val(pte) | _PAGE_DIRTY); + } else { + pte = __pte(pte_val(pte) & ~(_PAGE_WRITE | _PAGE_DIRTY)); + } + /* Allocate space in the tree and write the PTE */ ret = kvmppc_create_pte(kvm, pte, gpa, level, mmu_seq); -- cgit v1.2.3-59-g8ed1b From 679fcae46c8b2352bba3485d521da070cfbe68e6 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Tue, 4 Sep 2018 11:47:40 -0700 Subject: scsi: iscsi: target: Don't use stack buffer for scatterlist Fedora got a bug report of a crash with iSCSI: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod] ... Call Trace: ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod] ? native_sched_clock+0x3e/0xa0 ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod] kthread+0x120/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This is a BUG_ON for using a stack buffer with a scatterlist. There are two cases that trigger this bug. Switch to using a dynamically allocated buffer for one case and do not assign a NULL buffer in another case. Signed-off-by: Laura Abbott Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/target/iscsi/iscsi_target.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 9cdfccbdd06f..cc756a123fd8 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1416,7 +1416,8 @@ static void iscsit_do_crypto_hash_buf(struct ahash_request *hash, sg_init_table(sg, ARRAY_SIZE(sg)); sg_set_buf(sg, buf, payload_length); - sg_set_buf(sg + 1, pad_bytes, padding); + if (padding) + sg_set_buf(sg + 1, pad_bytes, padding); ahash_request_set_crypt(hash, sg, data_crc, payload_length + padding); @@ -3910,10 +3911,14 @@ static bool iscsi_target_check_conn_state(struct iscsi_conn *conn) static void iscsit_get_rx_pdu(struct iscsi_conn *conn) { int ret; - u8 buffer[ISCSI_HDR_LEN], opcode; + u8 *buffer, opcode; u32 checksum = 0, digest = 0; struct kvec iov; + buffer = kcalloc(ISCSI_HDR_LEN, sizeof(*buffer), GFP_KERNEL); + if (!buffer) + return; + while (!kthread_should_stop()) { /* * Ensure that both TX and RX per connection kthreads @@ -3921,7 +3926,6 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn) */ iscsit_thread_check_cpumask(conn, current, 0); - memset(buffer, 0, ISCSI_HDR_LEN); memset(&iov, 0, sizeof(struct kvec)); iov.iov_base = buffer; @@ -3930,7 +3934,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn) ret = rx_data(conn, &iov, 1, ISCSI_HDR_LEN); if (ret != ISCSI_HDR_LEN) { iscsit_rx_thread_wait_for_tcp(conn); - return; + break; } if (conn->conn_ops->HeaderDigest) { @@ -3940,7 +3944,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn) ret = rx_data(conn, &iov, 1, ISCSI_CRC_LEN); if (ret != ISCSI_CRC_LEN) { iscsit_rx_thread_wait_for_tcp(conn); - return; + break; } iscsit_do_crypto_hash_buf(conn->conn_rx_hash, buffer, @@ -3964,7 +3968,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn) } if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) - return; + break; opcode = buffer[0] & ISCSI_OPCODE_MASK; @@ -3975,13 +3979,15 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn) " while in Discovery Session, rejecting.\n", opcode); iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR, buffer); - return; + break; } ret = iscsi_target_rx_opcode(conn, buffer); if (ret < 0) - return; + break; } + + kfree(buffer); } int iscsi_target_rx_thread(void *arg) -- cgit v1.2.3-59-g8ed1b From cbe3fd39d223f14b1c60c80fe9347a3dd08c2edb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 8 Sep 2018 11:42:27 +0300 Subject: scsi: qla2xxx: Fix an endian bug in fcpcmd_is_corrupted() We should first do the le16_to_cpu endian conversion and then apply the FCP_CMD_LENGTH_MASK mask. Fixes: 5f35509db179 ("qla2xxx: Terminate exchange if corrupted") Signed-off-by: Dan Carpenter Acked-by: Quinn Tran Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h index fecf96f0225c..199d3ba1916d 100644 --- a/drivers/scsi/qla2xxx/qla_target.h +++ b/drivers/scsi/qla2xxx/qla_target.h @@ -374,8 +374,8 @@ struct atio_from_isp { static inline int fcpcmd_is_corrupted(struct atio *atio) { if (atio->entry_type == ATIO_TYPE7 && - (le16_to_cpu(atio->attr_n_length & FCP_CMD_LENGTH_MASK) < - FCP_CMD_LENGTH_MIN)) + ((le16_to_cpu(atio->attr_n_length) & FCP_CMD_LENGTH_MASK) < + FCP_CMD_LENGTH_MIN)) return 1; else return 0; -- cgit v1.2.3-59-g8ed1b From b90ca5cc32f59bb214847c6855959702f00c6801 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 11 Sep 2018 21:27:44 -0700 Subject: filesystem-dax: Fix use of zero page Use my_zero_pfn instead of ZERO_PAGE(), and pass the vaddr to it instead of zero so it works on MIPS and s390 who reference the vaddr to select a zero page. Cc: Fixes: 91d25ba8a6b0 ("dax: use common 4k zero page for dax mmap reads") Signed-off-by: Matthew Wilcox Reviewed-by: Ross Zwisler Signed-off-by: Dan Williams --- fs/dax.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/fs/dax.c b/fs/dax.c index f32d7125ad0f..b68ce484e1be 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -1120,21 +1120,12 @@ static vm_fault_t dax_load_hole(struct address_space *mapping, void *entry, { struct inode *inode = mapping->host; unsigned long vaddr = vmf->address; - vm_fault_t ret = VM_FAULT_NOPAGE; - struct page *zero_page; - pfn_t pfn; - - zero_page = ZERO_PAGE(0); - if (unlikely(!zero_page)) { - ret = VM_FAULT_OOM; - goto out; - } + pfn_t pfn = pfn_to_pfn_t(my_zero_pfn(vaddr)); + vm_fault_t ret; - pfn = page_to_pfn_t(zero_page); dax_insert_mapping_entry(mapping, vmf, entry, pfn, RADIX_DAX_ZERO_PAGE, false); ret = vmf_insert_mixed(vmf->vma, vaddr, pfn); -out: trace_dax_load_hole(inode, vmf, ret); return ret; } -- cgit v1.2.3-59-g8ed1b From 542cedec53c9e8b73f3f05bf8468823598c50489 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 11 Sep 2018 15:12:46 -0600 Subject: Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" This reverts commit 12eeeb4f4733bbc4481d01df35933fc15beb8b19. The patch doesn't fix accessing memory with null pointer in skl_interrupt(). There are two problems: 1) skl_init_chip() is called twice, before and after dma buffer is allocate. The first call sets bus->chip_init which prevents the second from initializing bus->corb.buf and rirb.buf from bus->rb.area. 2) snd_hdac_bus_init_chip() enables interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. There is a small window which skl_interrupt() can be called if irq has been acquired. If so, it crashes when using null dma buffer pointers. Will fix the problems in the following patches. Also attaching the crash for future reference. [ 16.949148] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 16.950903] Call Trace: [ 16.950906] [ 16.950918] skl_interrupt+0x19e/0x2d6 [snd_soc_skl] [ 16.950926] ? dma_supported+0xb5/0xb5 [snd_soc_skl] [ 16.950933] __handle_irq_event_percpu+0x27a/0x6c8 [ 16.950937] ? __irq_wake_thread+0x1d1/0x1d1 [ 16.950942] ? __do_softirq+0x57a/0x69e [ 16.950944] handle_irq_event_percpu+0x95/0x1ba [ 16.950948] ? _raw_spin_unlock+0x65/0xdc [ 16.950951] ? __handle_irq_event_percpu+0x6c8/0x6c8 [ 16.950953] ? _raw_spin_unlock+0x65/0xdc [ 16.950957] ? time_cpufreq_notifier+0x483/0x483 [ 16.950959] handle_irq_event+0x89/0x123 [ 16.950962] handle_fasteoi_irq+0x16f/0x425 [ 16.950965] handle_irq+0x1fe/0x28e [ 16.950969] do_IRQ+0x6e/0x12e [ 16.950972] common_interrupt+0x7a/0x7a [ 16.950974] [ 16.951031] RIP: snd_hdac_bus_update_rirb+0x19b/0x4cf [snd_hda_core] RSP: ffff88015c807c08 [ 16.951036] ---[ end trace 58bf9ece1775bc92 ]--- Fixes: 2eeeb4f4733b ("ASoC: Intel: Skylake: Acquire irq after RIRB allocation") Signed-off-by: Yu Zhao Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index cf09721ca13e..dce649485649 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -838,7 +838,11 @@ static int skl_first_init(struct hdac_bus *bus) snd_hdac_bus_parse_capabilities(bus); + if (skl_acquire_irq(bus, 0) < 0) + return -EBUSY; + pci_set_master(pci); + synchronize_irq(bus->irq); gcap = snd_hdac_chip_readw(bus, GCAP); dev_dbg(bus->dev, "chipset global capabilities = 0x%x\n", gcap); @@ -871,12 +875,6 @@ static int skl_first_init(struct hdac_bus *bus) if (err < 0) return err; - err = skl_acquire_irq(bus, 0); - if (err < 0) - return err; - - synchronize_irq(bus->irq); - /* initialize chip */ skl_init_pci(skl); -- cgit v1.2.3-59-g8ed1b From b61749a89f826eb61fc59794d9e4697bd246eb61 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 11 Sep 2018 15:14:04 -0600 Subject: sound: enable interrupt after dma buffer initialization In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai Signed-off-by: Yu Zhao Signed-off-by: Mark Brown --- sound/hda/hdac_controller.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 560ec0986e1a..11057d9f84ec 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus) */ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) { + WARN_ON_ONCE(!bus->rb.area); + spin_lock_irq(&bus->reg_lock); /* CORB set up */ bus->corb.addr = bus->rb.addr; @@ -479,13 +481,15 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) /* reset controller */ azx_reset(bus, full_reset); - /* initialize interrupts */ + /* clear interrupts */ azx_int_clear(bus); - azx_int_enable(bus); /* initialize the codec command I/O */ snd_hdac_bus_init_cmd_io(bus); + /* enable interrupts after CORB/RIRB buffers are initialized above */ + azx_int_enable(bus); + /* program the position buffer */ if (bus->use_posbuf && bus->posbuf.addr) { snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr); -- cgit v1.2.3-59-g8ed1b From 75383f8d39d4c0fb96083dd460b7b139fbdac492 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 11 Sep 2018 15:15:16 -0600 Subject: sound: don't call skl_init_chip() to reset intel skl soc Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai Signed-off-by: Yu Zhao Signed-off-by: Mark Brown --- include/sound/hdaudio.h | 1 + sound/hda/hdac_controller.c | 7 ++++--- sound/soc/intel/skylake/skl.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index ab5ee3ef2198..207e816ce6e1 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -384,6 +384,7 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus); void snd_hdac_bus_stop_cmd_io(struct hdac_bus *bus); void snd_hdac_bus_enter_link_reset(struct hdac_bus *bus); void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus); +int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset); void snd_hdac_bus_update_rirb(struct hdac_bus *bus); int snd_hdac_bus_handle_stream_irq(struct hdac_bus *bus, unsigned int status, diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 11057d9f84ec..74244d8e2909 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -385,7 +385,7 @@ void snd_hdac_bus_exit_link_reset(struct hdac_bus *bus) EXPORT_SYMBOL_GPL(snd_hdac_bus_exit_link_reset); /* reset codec link */ -static int azx_reset(struct hdac_bus *bus, bool full_reset) +int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset) { if (!full_reset) goto skip_reset; @@ -410,7 +410,7 @@ static int azx_reset(struct hdac_bus *bus, bool full_reset) skip_reset: /* check to see if controller is ready */ if (!snd_hdac_chip_readb(bus, GCTL)) { - dev_dbg(bus->dev, "azx_reset: controller not ready!\n"); + dev_dbg(bus->dev, "controller not ready!\n"); return -EBUSY; } @@ -425,6 +425,7 @@ static int azx_reset(struct hdac_bus *bus, bool full_reset) return 0; } +EXPORT_SYMBOL_GPL(snd_hdac_bus_reset_link); /* enable interrupts */ static void azx_int_enable(struct hdac_bus *bus) @@ -479,7 +480,7 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) return false; /* reset controller */ - azx_reset(bus, full_reset); + snd_hdac_bus_reset_link(bus, full_reset); /* clear interrupts */ azx_int_clear(bus); diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index dce649485649..1d17be0f78a0 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -834,7 +834,7 @@ static int skl_first_init(struct hdac_bus *bus) return -ENXIO; } - skl_init_chip(bus, true); + snd_hdac_bus_reset_link(bus, true); snd_hdac_bus_parse_capabilities(bus); -- cgit v1.2.3-59-g8ed1b From 9d2ac5f4bec00a0697ab77c999ef38753b3cb900 Mon Sep 17 00:00:00 2001 From: Jacopo Mondi Date: Fri, 3 Aug 2018 12:40:58 +0200 Subject: media: i2c: mt9v111: Fix v4l2-ctrl error handling Fix error handling of v4l2_ctrl creation by inspecting the ctrl.error flag instead of testing for each returned value correctness. As reported by Dan Carpenter returning PTR_ERR() on the v4l2_ctrl_new_std() return value is also wrong, as that function return NULL on error. While at there re-order the cleanup path to respect the operation inverse order. Fixes: aab7ed1c "media: i2c: Add driver for Aptina MT9V111" Reported-by: Dan Carpenter Signed-off-by: Jacopo Mondi Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/mt9v111.c | 41 +++++++++++++---------------------------- 1 file changed, 13 insertions(+), 28 deletions(-) diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c index b5410aeb5fe2..bb41bea950ac 100644 --- a/drivers/media/i2c/mt9v111.c +++ b/drivers/media/i2c/mt9v111.c @@ -1159,41 +1159,21 @@ static int mt9v111_probe(struct i2c_client *client) V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, V4L2_WHITE_BALANCE_AUTO); - if (IS_ERR_OR_NULL(mt9v111->auto_awb)) { - ret = PTR_ERR(mt9v111->auto_awb); - goto error_free_ctrls; - } - mt9v111->auto_exp = v4l2_ctrl_new_std_menu(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO); - if (IS_ERR_OR_NULL(mt9v111->auto_exp)) { - ret = PTR_ERR(mt9v111->auto_exp); - goto error_free_ctrls; - } - - /* Initialize timings */ mt9v111->hblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_HBLANK, MT9V111_CORE_R05_MIN_HBLANK, MT9V111_CORE_R05_MAX_HBLANK, 1, MT9V111_CORE_R05_DEF_HBLANK); - if (IS_ERR_OR_NULL(mt9v111->hblank)) { - ret = PTR_ERR(mt9v111->hblank); - goto error_free_ctrls; - } - mt9v111->vblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, V4L2_CID_VBLANK, MT9V111_CORE_R06_MIN_VBLANK, MT9V111_CORE_R06_MAX_VBLANK, 1, MT9V111_CORE_R06_DEF_VBLANK); - if (IS_ERR_OR_NULL(mt9v111->vblank)) { - ret = PTR_ERR(mt9v111->vblank); - goto error_free_ctrls; - } /* PIXEL_RATE is fixed: just expose it to user space. */ v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, @@ -1201,6 +1181,10 @@ static int mt9v111_probe(struct i2c_client *client) DIV_ROUND_CLOSEST(mt9v111->sysclk, 2), 1, DIV_ROUND_CLOSEST(mt9v111->sysclk, 2)); + if (mt9v111->ctrls.error) { + ret = mt9v111->ctrls.error; + goto error_free_ctrls; + } mt9v111->sd.ctrl_handler = &mt9v111->ctrls; /* Start with default configuration: 640x480 UYVY. */ @@ -1226,26 +1210,27 @@ static int mt9v111_probe(struct i2c_client *client) mt9v111->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&mt9v111->sd.entity, 1, &mt9v111->pad); if (ret) - goto error_free_ctrls; + goto error_free_entity; #endif ret = mt9v111_chip_probe(mt9v111); if (ret) - goto error_free_ctrls; + goto error_free_entity; ret = v4l2_async_register_subdev(&mt9v111->sd); if (ret) - goto error_free_ctrls; + goto error_free_entity; return 0; -error_free_ctrls: - v4l2_ctrl_handler_free(&mt9v111->ctrls); - +error_free_entity: #if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) media_entity_cleanup(&mt9v111->sd.entity); #endif +error_free_ctrls: + v4l2_ctrl_handler_free(&mt9v111->ctrls); + mutex_destroy(&mt9v111->pwr_mutex); mutex_destroy(&mt9v111->stream_mutex); @@ -1259,12 +1244,12 @@ static int mt9v111_remove(struct i2c_client *client) v4l2_async_unregister_subdev(sd); - v4l2_ctrl_handler_free(&mt9v111->ctrls); - #if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) media_entity_cleanup(&sd->entity); #endif + v4l2_ctrl_handler_free(&mt9v111->ctrls); + mutex_destroy(&mt9v111->pwr_mutex); mutex_destroy(&mt9v111->stream_mutex); -- cgit v1.2.3-59-g8ed1b From dab99a0f77e9764a00b0203d0155ca134247f461 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 30 Aug 2018 06:18:22 -0400 Subject: media: staging/media/mt9t031/Kconfig: remove bogus entry The 'config SOC_CAMERA_IMX074' is a copy-and-paste error and should be removed. This Kconfig is for mt9t031 only. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/mt9t031/Kconfig | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/staging/media/mt9t031/Kconfig b/drivers/staging/media/mt9t031/Kconfig index f48e06a03cdb..9a58aaf72edd 100644 --- a/drivers/staging/media/mt9t031/Kconfig +++ b/drivers/staging/media/mt9t031/Kconfig @@ -1,9 +1,3 @@ -config SOC_CAMERA_IMX074 - tristate "imx074 support (DEPRECATED)" - depends on SOC_CAMERA && I2C - help - This driver supports IMX074 cameras from Sony - config SOC_CAMERA_MT9T031 tristate "mt9t031 support (DEPRECATED)" depends on SOC_CAMERA && I2C -- cgit v1.2.3-59-g8ed1b From 1843abd03250115af6cec0892683e70cf2297c25 Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Thu, 16 Aug 2018 09:02:31 +0100 Subject: s390/mm: Check for valid vma before zapping in gmap_discard Userspace could have munmapped the area before doing unmapping from the gmap. This would leave us with a valid vmaddr, but an invalid vma from which we would try to zap memory. Let's check before using the vma. Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by: Janosch Frank Reviewed-by: David Hildenbrand Reported-by: Dan Carpenter Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank --- arch/s390/mm/gmap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c index bb44990c8212..911c7ded35f1 100644 --- a/arch/s390/mm/gmap.c +++ b/arch/s390/mm/gmap.c @@ -708,11 +708,13 @@ void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to) vmaddr |= gaddr & ~PMD_MASK; /* Find vma in the parent mm */ vma = find_vma(gmap->mm, vmaddr); + if (!vma) + continue; /* * We do not discard pages that are backed by * hugetlbfs, so we don't have to refault them. */ - if (vma && is_vm_hugetlb_page(vma)) + if (is_vm_hugetlb_page(vma)) continue; size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK)); zap_page_range(vma, vmaddr, size); -- cgit v1.2.3-59-g8ed1b From 40ebdb8e59df36e2cc71810bd021a0808b16c956 Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Wed, 1 Aug 2018 11:48:28 +0100 Subject: KVM: s390: Make huge pages unavailable in ucontrol VMs We currently do not notify all gmaps when using gmap_pmdp_xchg(), due to locking constraints. This makes ucontrol VMs, which is the only VM type that creates multiple gmaps, incompatible with huge pages. Also we would need to hold the guest_table_lock of all gmaps that have this vmaddr maped to synchronize access to the pmd. ucontrol VMs are rather exotic and creating a new locking concept is no easy task. Hence we return EINVAL when trying to active KVM_CAP_S390_HPAGE_1M and report it as being not available when checking for it. Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Signed-off-by: Janosch Frank Reviewed-by: David Hildenbrand Reviewed-by: Claudio Imbrenda Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank --- Documentation/virtual/kvm/api.txt | 3 ++- arch/s390/kvm/kvm-s390.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index c664064f76fb..8d8a372c8340 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -4510,7 +4510,8 @@ Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits. Architectures: s390 Parameters: none Returns: 0 on success, -EINVAL if hpage module parameter was not set - or cmma is enabled + or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL + flag set With this capability the KVM support for memory backing with 1m pages through hugetlbfs can be enabled for a VM. After the capability is diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f69333fd2fa3..ac5da6b0b862 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -481,7 +481,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) break; case KVM_CAP_S390_HPAGE_1M: r = 0; - if (hpage) + if (hpage && !kvm_is_ucontrol(kvm)) r = 1; break; case KVM_CAP_S390_MEM_OP: @@ -691,7 +691,7 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap) mutex_lock(&kvm->lock); if (kvm->created_vcpus) r = -EBUSY; - else if (!hpage || kvm->arch.use_cmma) + else if (!hpage || kvm->arch.use_cmma || kvm_is_ucontrol(kvm)) r = -EINVAL; else { r = 0; -- cgit v1.2.3-59-g8ed1b From 6ee67e351cdae68b4c9c7df74124b9f9fb81e966 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 12 Sep 2018 03:15:30 +0000 Subject: drm/fb-helper: Remove set but not used variable 'connector_funcs' Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_fb_helper.c: In function 'drm_pick_crtcs': drivers/gpu/drm/drm_fb_helper.c:2373:43: warning: variable 'connector_funcs' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1536722130-108819-1-git-send-email-yuehaibing@huawei.com --- drivers/gpu/drm/drm_fb_helper.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 4b0dd20bccb8..16ec93b75dbf 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -2370,7 +2370,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper, { int c, o; struct drm_connector *connector; - const struct drm_connector_helper_funcs *connector_funcs; int my_score, best_score, score; struct drm_fb_helper_crtc **crtcs, *crtc; struct drm_fb_helper_connector *fb_helper_conn; @@ -2399,8 +2398,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper, if (drm_has_preferred_mode(fb_helper_conn, width, height)) my_score++; - connector_funcs = connector->helper_private; - /* * select a crtc for this connector and then attempt to configure * remaining connectors -- cgit v1.2.3-59-g8ed1b From d310959365942b100f79b56bcce859968fe7ca9c Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Tue, 11 Sep 2018 13:26:38 -0700 Subject: efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to y Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command line parameter to function with efi loader. Required for development purposes and to boot on existing bootloaders that do not support devicetree provided by the firmware or by the bootloader. Fixes: 3d7ee348aa41 ("efi/libstub/arm: Add opt-in Kconfig option ...") Signed-off-by: Scott Branden Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/Kconfig | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig index d8e159feb573..89110dfc7127 100644 --- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -90,14 +90,17 @@ config EFI_ARMSTUB config EFI_ARMSTUB_DTB_LOADER bool "Enable the DTB loader" depends on EFI_ARMSTUB + default y help Select this config option to add support for the dtb= command line parameter, allowing a device tree blob to be loaded into memory from the EFI System Partition by the stub. - The device tree is typically provided by the platform or by - the bootloader, so this option is mostly for development - purposes only. + If the device tree is provided by the platform or by + the bootloader this option may not be needed. + But, for various development reasons and to maintain existing + functionality for bootloaders that do not have such support + this option is necessary. config EFI_BOOTLOADER_CONTROL tristate "EFI Bootloader Control" -- cgit v1.2.3-59-g8ed1b From 4b1c5d917d34f705096bb7dd8a2bd19b0881970e Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Wed, 12 Sep 2018 10:29:11 -0700 Subject: bpf: btf: Fix end boundary calculation for type section The end boundary math for type section is incorrect in btf_check_all_metas(). It just happens that hdr->type_off is always 0 for now because there are only two sections (type and string) and string section must be at the end (ensured in btf_parse_str_sec). However, type_off may not be 0 if a new section would be added later. This patch fixes it. Fixes: f80442a4cd18 ("bpf: btf: Change how section is supported in btf_header") Reported-by: Dmitry Vyukov Signed-off-by: Martin KaFai Lau Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- kernel/bpf/btf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 2590700237c1..138f0302692e 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -1844,7 +1844,7 @@ static int btf_check_all_metas(struct btf_verifier_env *env) hdr = &btf->hdr; cur = btf->nohdr_data + hdr->type_off; - end = btf->nohdr_data + hdr->type_len; + end = cur + hdr->type_len; env->log_type_id = 1; while (cur < end) { -- cgit v1.2.3-59-g8ed1b From dd066823db2ac4e22f721ec85190817b58059a54 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 12 Sep 2018 14:06:10 -0700 Subject: bpf/verifier: disallow pointer subtraction Subtraction of pointers was accidentally allowed for unpriv programs by commit 82abbf8d2fc4. Revert that part of commit. Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers") Reported-by: Jann Horn Acked-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- kernel/bpf/verifier.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 92246117d2b0..bb07e74b34a2 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -3163,7 +3163,7 @@ static int adjust_reg_min_max_vals(struct bpf_verifier_env *env, * an arbitrary scalar. Disallow all math except * pointer subtraction */ - if (opcode == BPF_SUB){ + if (opcode == BPF_SUB && env->allow_ptr_leaks) { mark_reg_unknown(env, regs, insn->dst_reg); return 0; } -- cgit v1.2.3-59-g8ed1b From 67e3816842fe6414d629c7515b955952ec40c7d7 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 31 Aug 2018 07:16:03 -0700 Subject: RDMA/uverbs: Atomically flush and mark closed the comp event queue Currently a uverbs completion event queue is flushed of events in ib_uverbs_comp_event_close() with the queue spinlock held and then released. Yet setting ev_queue->is_closed is not set until later in uverbs_hot_unplug_completion_event_file(). In between the time ib_uverbs_comp_event_close() releases the lock and uverbs_hot_unplug_completion_event_file() acquires the lock, a completion event can arrive and be inserted into the event queue by ib_uverbs_comp_handler(). This can cause a "double add" list_add warning or crash depending on the kernel configuration, or a memory leak because the event is never dequeued since the queue is already closed down. So add setting ev_queue->is_closed = 1 to ib_uverbs_comp_event_close(). Cc: stable@vger.kernel.org Fixes: 1e7710f3f656 ("IB/core: Change completion channel to use the reworked objects schema") Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 6d974e2363df..50152c1b1004 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -440,6 +440,7 @@ static int ib_uverbs_comp_event_close(struct inode *inode, struct file *filp) list_del(&entry->obj_list); kfree(entry); } + file->ev_queue.is_closed = 1; spin_unlock_irq(&file->ev_queue.lock); uverbs_close_fd(filp); -- cgit v1.2.3-59-g8ed1b From 4c3d795cb012a378855543a775408fba1ccff6f2 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Wed, 12 Sep 2018 22:15:29 +0200 Subject: bpf: use __GFP_COMP while allocating page Helper bpg_msg_pull_data() can allocate multiple pages while linearizing multiple scatterlist elements into one shared page. However, if the shared page has size > PAGE_SIZE, using copy_page_to_iter() causes below warning. e.g. [ 6367.019832] WARNING: CPU: 2 PID: 7410 at lib/iov_iter.c:825 page_copy_sane.part.8+0x0/0x8 To avoid above warning, use __GFP_COMP while allocating multiple contiguous pages. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave Signed-off-by: Daniel Borkmann --- net/core/filter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/filter.c b/net/core/filter.c index aecdeba052d3..5e00f2b85a56 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2344,7 +2344,8 @@ BPF_CALL_4(bpf_msg_pull_data, if (unlikely(bytes_sg_total > copy)) return -EINVAL; - page = alloc_pages(__GFP_NOWARN | GFP_ATOMIC, get_order(copy)); + page = alloc_pages(__GFP_NOWARN | GFP_ATOMIC | __GFP_COMP, + get_order(copy)); if (unlikely(!page)) return -ENOMEM; p = page_address(page); -- cgit v1.2.3-59-g8ed1b From dfb06cba8c73c0704710b2e3fbe2c35ac66a01b4 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 5 Sep 2018 13:31:40 -0700 Subject: uaccess: Fix is_source param for check_copy_size() in copy_to_iter_mcsafe() copy_to_iter_mcsafe() is passing in the is_source parameter as "false" to check_copy_size(). This is different than what copy_to_iter() does. Also, the addr parameter passed to check_copy_size() is the source so therefore we should be passing in "true" instead. Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Cc: Reported-by: Fan Du Signed-off-by: Dave Jiang Reviewed-by: Vishal Verma Reported-by: Wenwei Tao Signed-off-by: Dan Williams --- include/linux/uio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/uio.h b/include/linux/uio.h index 409c845d4cd3..422b1c01ee0d 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -172,7 +172,7 @@ size_t copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i) static __always_inline __must_check size_t copy_to_iter_mcsafe(void *addr, size_t bytes, struct iov_iter *i) { - if (unlikely(!check_copy_size(addr, bytes, false))) + if (unlikely(!check_copy_size(addr, bytes, true))) return 0; else return _copy_to_iter_mcsafe(addr, bytes, i); -- cgit v1.2.3-59-g8ed1b From 3702a0585e64d70d5bf73bf3e943b8d6005b72c1 Mon Sep 17 00:00:00 2001 From: Brijesh Singh Date: Wed, 15 Aug 2018 16:11:25 -0500 Subject: crypto: ccp - add timeout support in the SEV command Currently, the CCP driver assumes that the SEV command issued to the PSP will always return (i.e. it will never hang). But recently, firmware bugs have shown that a command can hang. Since of the SEV commands are used in probe routines, this can cause boot hangs and/or loss of virtualization capabilities. To protect against firmware bugs, add a timeout in the SEV command execution flow. If a command does not complete within the specified timeout then return -ETIMEOUT and stop the driver from executing any further commands since the state of the SEV firmware is unknown. Cc: Tom Lendacky Cc: Gary Hook Cc: Herbert Xu Cc: linux-kernel@vger.kernel.org Signed-off-by: Brijesh Singh Signed-off-by: Herbert Xu --- drivers/crypto/ccp/psp-dev.c | 46 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/ccp/psp-dev.c b/drivers/crypto/ccp/psp-dev.c index 218739b961fe..72790d88236d 100644 --- a/drivers/crypto/ccp/psp-dev.c +++ b/drivers/crypto/ccp/psp-dev.c @@ -38,6 +38,17 @@ static DEFINE_MUTEX(sev_cmd_mutex); static struct sev_misc_dev *misc_dev; static struct psp_device *psp_master; +static int psp_cmd_timeout = 100; +module_param(psp_cmd_timeout, int, 0644); +MODULE_PARM_DESC(psp_cmd_timeout, " default timeout value, in seconds, for PSP commands"); + +static int psp_probe_timeout = 5; +module_param(psp_probe_timeout, int, 0644); +MODULE_PARM_DESC(psp_probe_timeout, " default timeout value, in seconds, during PSP device probe"); + +static bool psp_dead; +static int psp_timeout; + static struct psp_device *psp_alloc_struct(struct sp_device *sp) { struct device *dev = sp->dev; @@ -82,10 +93,19 @@ done: return IRQ_HANDLED; } -static void sev_wait_cmd_ioc(struct psp_device *psp, unsigned int *reg) +static int sev_wait_cmd_ioc(struct psp_device *psp, + unsigned int *reg, unsigned int timeout) { - wait_event(psp->sev_int_queue, psp->sev_int_rcvd); + int ret; + + ret = wait_event_timeout(psp->sev_int_queue, + psp->sev_int_rcvd, timeout * HZ); + if (!ret) + return -ETIMEDOUT; + *reg = ioread32(psp->io_regs + psp->vdata->cmdresp_reg); + + return 0; } static int sev_cmd_buffer_len(int cmd) @@ -133,12 +153,15 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret) if (!psp) return -ENODEV; + if (psp_dead) + return -EBUSY; + /* Get the physical address of the command buffer */ phys_lsb = data ? lower_32_bits(__psp_pa(data)) : 0; phys_msb = data ? upper_32_bits(__psp_pa(data)) : 0; - dev_dbg(psp->dev, "sev command id %#x buffer 0x%08x%08x\n", - cmd, phys_msb, phys_lsb); + dev_dbg(psp->dev, "sev command id %#x buffer 0x%08x%08x timeout %us\n", + cmd, phys_msb, phys_lsb, psp_timeout); print_hex_dump_debug("(in): ", DUMP_PREFIX_OFFSET, 16, 2, data, sev_cmd_buffer_len(cmd), false); @@ -154,7 +177,18 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret) iowrite32(reg, psp->io_regs + psp->vdata->cmdresp_reg); /* wait for command completion */ - sev_wait_cmd_ioc(psp, ®); + ret = sev_wait_cmd_ioc(psp, ®, psp_timeout); + if (ret) { + if (psp_ret) + *psp_ret = 0; + + dev_err(psp->dev, "sev command %#x timed out, disabling PSP \n", cmd); + psp_dead = true; + + return ret; + } + + psp_timeout = psp_cmd_timeout; if (psp_ret) *psp_ret = reg & PSP_CMDRESP_ERR_MASK; @@ -888,6 +922,8 @@ void psp_pci_init(void) psp_master = sp->psp_data; + psp_timeout = psp_probe_timeout; + if (sev_get_api_version()) goto err; -- cgit v1.2.3-59-g8ed1b From a49a83ab05e34edd6c71a4fbd062c9a7ba6d18aa Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Sep 2018 21:30:34 +0900 Subject: ALSA: firewire-digi00x: fix memory leak of private data Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/digi00x/digi00x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/firewire/digi00x/digi00x.c b/sound/firewire/digi00x/digi00x.c index 1f5e1d23f31a..ef689997d6a5 100644 --- a/sound/firewire/digi00x/digi00x.c +++ b/sound/firewire/digi00x/digi00x.c @@ -49,6 +49,7 @@ static void dg00x_free(struct snd_dg00x *dg00x) fw_unit_put(dg00x->unit); mutex_destroy(&dg00x->mutex); + kfree(dg00x); } static void dg00x_card_free(struct snd_card *card) -- cgit v1.2.3-59-g8ed1b From 8d28277c065a974873c6781d44b7bcdcd8fb4e8a Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Sep 2018 21:31:05 +0900 Subject: ALSA: firewire-tascam: fix memory leak of private data Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/tascam/tascam.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/firewire/tascam/tascam.c b/sound/firewire/tascam/tascam.c index 44ad41fb7374..d3fdc463a884 100644 --- a/sound/firewire/tascam/tascam.c +++ b/sound/firewire/tascam/tascam.c @@ -93,6 +93,7 @@ static void tscm_free(struct snd_tscm *tscm) fw_unit_put(tscm->unit); mutex_destroy(&tscm->mutex); + kfree(tscm); } static void tscm_card_free(struct snd_card *card) -- cgit v1.2.3-59-g8ed1b From 498fe23aad8e3b5a9554f55719c537603b4476ea Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Thu, 13 Sep 2018 21:31:18 +0900 Subject: ALSA: oxfw: fix memory leak of private data Although private data of sound card instance is usually allocated in the tail of the instance, drivers in ALSA firewire stack allocate the private data before allocating the instance. In this case, the private data should be released explicitly at .private_free callback of the instance. This commit fixes memory leak following to the above design. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/oxfw/oxfw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index 1e5b2c802635..fd34ef2ac679 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -130,6 +130,7 @@ static void oxfw_free(struct snd_oxfw *oxfw) kfree(oxfw->spec); mutex_destroy(&oxfw->mutex); + kfree(oxfw); } /* -- cgit v1.2.3-59-g8ed1b From 3b7d96a0dbb6b630878597a1838fc39f808b761b Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 8 Aug 2018 18:44:59 +0530 Subject: clocksource/drivers/ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by: Tony Lindgren Signed-off-by: Keerthy Acked-by: Tony Lindgren Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-ti-32k.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c index 29e2e1a78a43..6949a9113dbb 100644 --- a/drivers/clocksource/timer-ti-32k.c +++ b/drivers/clocksource/timer-ti-32k.c @@ -97,6 +97,9 @@ static int __init ti_32k_timer_init(struct device_node *np) return -ENXIO; } + if (!of_machine_is_compatible("ti,am43")) + ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; + ti_32k_timer.counter = ti_32k_timer.base; /* -- cgit v1.2.3-59-g8ed1b From 22d0bd82cc7cec7d9ed4bd5913f3ab65643364be Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 11 Sep 2018 14:33:58 +0800 Subject: ipv6: use rt6_info members when dst is set in rt6_fill_node In inet6_rtm_getroute, since Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"), it has used rt->from to dump route info instead of rt. However for some route like cache, some of its information like flags or gateway is not the same as that of the 'from' one. It caused 'ip route get' to dump the wrong route information. In Jianlin's testing, the output information even lost the expiration time for a pmtu route cache due to the wrong fib6_flags. So change to use rt6_info members for dst addr, src addr, flags and gateway when it tries to dump a route entry without fibmatch set. v1->v2: - not use rt6i_prefsrc. - also fix the gw dump issue. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Jianlin Shi Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/ipv6/route.c | 42 ++++++++++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 12 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 18e00ce1719a..3eed045c65a5 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4670,20 +4670,31 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, int iif, int type, u32 portid, u32 seq, unsigned int flags) { - struct rtmsg *rtm; + struct rt6_info *rt6 = (struct rt6_info *)dst; + struct rt6key *rt6_dst, *rt6_src; + u32 *pmetrics, table, rt6_flags; struct nlmsghdr *nlh; + struct rtmsg *rtm; long expires = 0; - u32 *pmetrics; - u32 table; nlh = nlmsg_put(skb, portid, seq, type, sizeof(*rtm), flags); if (!nlh) return -EMSGSIZE; + if (rt6) { + rt6_dst = &rt6->rt6i_dst; + rt6_src = &rt6->rt6i_src; + rt6_flags = rt6->rt6i_flags; + } else { + rt6_dst = &rt->fib6_dst; + rt6_src = &rt->fib6_src; + rt6_flags = rt->fib6_flags; + } + rtm = nlmsg_data(nlh); rtm->rtm_family = AF_INET6; - rtm->rtm_dst_len = rt->fib6_dst.plen; - rtm->rtm_src_len = rt->fib6_src.plen; + rtm->rtm_dst_len = rt6_dst->plen; + rtm->rtm_src_len = rt6_src->plen; rtm->rtm_tos = 0; if (rt->fib6_table) table = rt->fib6_table->tb6_id; @@ -4698,7 +4709,7 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, rtm->rtm_scope = RT_SCOPE_UNIVERSE; rtm->rtm_protocol = rt->fib6_protocol; - if (rt->fib6_flags & RTF_CACHE) + if (rt6_flags & RTF_CACHE) rtm->rtm_flags |= RTM_F_CLONED; if (dest) { @@ -4706,7 +4717,7 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, goto nla_put_failure; rtm->rtm_dst_len = 128; } else if (rtm->rtm_dst_len) - if (nla_put_in6_addr(skb, RTA_DST, &rt->fib6_dst.addr)) + if (nla_put_in6_addr(skb, RTA_DST, &rt6_dst->addr)) goto nla_put_failure; #ifdef CONFIG_IPV6_SUBTREES if (src) { @@ -4714,12 +4725,12 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, goto nla_put_failure; rtm->rtm_src_len = 128; } else if (rtm->rtm_src_len && - nla_put_in6_addr(skb, RTA_SRC, &rt->fib6_src.addr)) + nla_put_in6_addr(skb, RTA_SRC, &rt6_src->addr)) goto nla_put_failure; #endif if (iif) { #ifdef CONFIG_IPV6_MROUTE - if (ipv6_addr_is_multicast(&rt->fib6_dst.addr)) { + if (ipv6_addr_is_multicast(&rt6_dst->addr)) { int err = ip6mr_get_route(net, skb, rtm, portid); if (err == 0) @@ -4754,7 +4765,14 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, /* For multipath routes, walk the siblings list and add * each as a nexthop within RTA_MULTIPATH. */ - if (rt->fib6_nsiblings) { + if (rt6) { + if (rt6_flags & RTF_GATEWAY && + nla_put_in6_addr(skb, RTA_GATEWAY, &rt6->rt6i_gateway)) + goto nla_put_failure; + + if (dst->dev && nla_put_u32(skb, RTA_OIF, dst->dev->ifindex)) + goto nla_put_failure; + } else if (rt->fib6_nsiblings) { struct fib6_info *sibling, *next_sibling; struct nlattr *mp; @@ -4777,7 +4795,7 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, goto nla_put_failure; } - if (rt->fib6_flags & RTF_EXPIRES) { + if (rt6_flags & RTF_EXPIRES) { expires = dst ? dst->expires : rt->expires; expires -= jiffies; } @@ -4785,7 +4803,7 @@ static int rt6_fill_node(struct net *net, struct sk_buff *skb, if (rtnl_put_cacheinfo(skb, dst, 0, expires, dst ? dst->error : 0) < 0) goto nla_put_failure; - if (nla_put_u8(skb, RTA_PREF, IPV6_EXTRACT_PREF(rt->fib6_flags))) + if (nla_put_u8(skb, RTA_PREF, IPV6_EXTRACT_PREF(rt6_flags))) goto nla_put_failure; -- cgit v1.2.3-59-g8ed1b From ad4f15dc2c70b1de5e0a64d27335962fbc9cf71c Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 11 Sep 2018 09:04:48 +0200 Subject: xen/netfront: don't bug in case of too many frags Commit 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") raised the max number of allowed slots by one. This seems to be problematic in some configurations with netback using a larger MAX_SKB_FRAGS value (e.g. old Linux kernel with MAX_SKB_FRAGS defined as 18 instead of nowadays 17). Instead of BUG_ON() in this case just fall back to retransmission. Fixes: 57f230ab04d291 ("xen/netfront: raise max number of slots in xennet_get_responses()") Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 9407acbd19a9..f17f602e6171 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -908,7 +908,11 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue, BUG_ON(pull_to <= skb_headlen(skb)); __pskb_pull_tail(skb, pull_to - skb_headlen(skb)); } - BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS); + if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) { + queue->rx.rsp_cons = ++cons; + kfree_skb(nskb); + return ~0U; + } skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, skb_frag_page(nfrag), @@ -1045,6 +1049,8 @@ err: skb->len += rx->status; i = xennet_fill_frags(queue, skb, &tmpq); + if (unlikely(i == ~0U)) + goto err; if (rx->flags & XEN_NETRXF_csum_blank) skb->ip_summed = CHECKSUM_PARTIAL; -- cgit v1.2.3-59-g8ed1b From 37a3a98ef601f89100e3bb657fb0e190b857028c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 10 Sep 2018 16:20:25 +0200 Subject: ALSA: hda - Enable runtime PM only for discrete GPU The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan Tested-by: Jian-Hong Pan Acked-by: Lukas Wunner Signed-off-by: Takashi Iwai --- drivers/gpu/vga/vga_switcheroo.c | 2 + include/linux/vga_switcheroo.h | 3 ++ sound/pci/hda/hda_intel.c | 86 +++++++++++++++++++++++++++++----------- sound/pci/hda/hda_intel.h | 1 + 4 files changed, 69 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c index a96bf46bc483..cf2a18571d48 100644 --- a/drivers/gpu/vga/vga_switcheroo.c +++ b/drivers/gpu/vga/vga_switcheroo.c @@ -215,6 +215,8 @@ static void vga_switcheroo_enable(void) return; client->id = ret | ID_BIT_AUDIO; + if (client->ops->gpu_bound) + client->ops->gpu_bound(client->pdev, ret); } vga_switcheroo_debugfs_init(&vgasr_priv); diff --git a/include/linux/vga_switcheroo.h b/include/linux/vga_switcheroo.h index a34539b7f750..7e6ac0114d55 100644 --- a/include/linux/vga_switcheroo.h +++ b/include/linux/vga_switcheroo.h @@ -133,15 +133,18 @@ struct vga_switcheroo_handler { * @can_switch: check if the device is in a position to switch now. * Mandatory. The client should return false if a user space process * has one of its device files open + * @gpu_bound: notify the client id to audio client when the GPU is bound. * * Client callbacks. A client can be either a GPU or an audio device on a GPU. * The @set_gpu_state and @can_switch methods are mandatory, @reprobe may be * set to NULL. For audio clients, the @reprobe member is bogus. + * OTOH, @gpu_bound is only for audio clients, and not used for GPU clients. */ struct vga_switcheroo_client_ops { void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state); void (*reprobe)(struct pci_dev *dev); bool (*can_switch)(struct pci_dev *dev); + void (*gpu_bound)(struct pci_dev *dev, enum vga_switcheroo_client_id); }; #if defined(CONFIG_VGA_SWITCHEROO) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 1b2ce304152a..aa4c672dbaf7 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -365,8 +365,10 @@ enum { */ #ifdef SUPPORT_VGA_SWITCHEROO #define use_vga_switcheroo(chip) ((chip)->use_vga_switcheroo) +#define needs_eld_notify_link(chip) ((chip)->need_eld_notify_link) #else #define use_vga_switcheroo(chip) 0 +#define needs_eld_notify_link(chip) false #endif #define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \ @@ -453,6 +455,7 @@ static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev, #endif static int azx_acquire_irq(struct azx *chip, int do_disconnect); +static void set_default_power_save(struct azx *chip); /* * initialize the PCI registers @@ -1201,6 +1204,10 @@ static int azx_runtime_idle(struct device *dev) azx_bus(chip)->codec_powered || !chip->running) return -EBUSY; + /* ELD notification gets broken when HD-audio bus is off */ + if (needs_eld_notify_link(hda)) + return -EBUSY; + return 0; } @@ -1298,6 +1305,36 @@ static bool azx_vs_can_switch(struct pci_dev *pci) return true; } +/* + * The discrete GPU cannot power down unless the HDA controller runtime + * suspends, so activate runtime PM on codecs even if power_save == 0. + */ +static void setup_vga_switcheroo_runtime_pm(struct azx *chip) +{ + struct hda_intel *hda = container_of(chip, struct hda_intel, chip); + struct hda_codec *codec; + + if (hda->use_vga_switcheroo && !hda->need_eld_notify_link) { + list_for_each_codec(codec, &chip->bus) + codec->auto_runtime_pm = 1; + /* reset the power save setup */ + if (chip->running) + set_default_power_save(chip); + } +} + +static void azx_vs_gpu_bound(struct pci_dev *pci, + enum vga_switcheroo_client_id client_id) +{ + struct snd_card *card = pci_get_drvdata(pci); + struct azx *chip = card->private_data; + struct hda_intel *hda = container_of(chip, struct hda_intel, chip); + + if (client_id == VGA_SWITCHEROO_DIS) + hda->need_eld_notify_link = 0; + setup_vga_switcheroo_runtime_pm(chip); +} + static void init_vga_switcheroo(struct azx *chip) { struct hda_intel *hda = container_of(chip, struct hda_intel, chip); @@ -1306,6 +1343,7 @@ static void init_vga_switcheroo(struct azx *chip) dev_info(chip->card->dev, "Handle vga_switcheroo audio client\n"); hda->use_vga_switcheroo = 1; + hda->need_eld_notify_link = 1; /* cleared in gpu_bound op */ chip->driver_caps |= AZX_DCAPS_PM_RUNTIME; pci_dev_put(p); } @@ -1314,6 +1352,7 @@ static void init_vga_switcheroo(struct azx *chip) static const struct vga_switcheroo_client_ops azx_vs_ops = { .set_gpu_state = azx_vs_set_state, .can_switch = azx_vs_can_switch, + .gpu_bound = azx_vs_gpu_bound, }; static int register_vga_switcheroo(struct azx *chip) @@ -1339,6 +1378,7 @@ static int register_vga_switcheroo(struct azx *chip) #define init_vga_switcheroo(chip) /* NOP */ #define register_vga_switcheroo(chip) 0 #define check_hdmi_disabled(pci) false +#define setup_vga_switcheroo_runtime_pm(chip) /* NOP */ #endif /* SUPPORT_VGA_SWITCHER */ /* @@ -1352,6 +1392,7 @@ static int azx_free(struct azx *chip) if (azx_has_pm_runtime(chip) && chip->running) pm_runtime_get_noresume(&pci->dev); + chip->running = 0; azx_del_card_list(chip); @@ -2230,6 +2271,25 @@ static struct snd_pci_quirk power_save_blacklist[] = { }; #endif /* CONFIG_PM */ +static void set_default_power_save(struct azx *chip) +{ + int val = power_save; + +#ifdef CONFIG_PM + if (pm_blacklist) { + const struct snd_pci_quirk *q; + + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); +} + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2241,9 +2301,7 @@ static int azx_probe_continue(struct azx *chip) struct hda_intel *hda = container_of(chip, struct hda_intel, chip); struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; - struct hda_codec *codec; int dev = chip->dev_index; - int val; int err; hda->probe_continued = 1; @@ -2322,31 +2380,13 @@ static int azx_probe_continue(struct azx *chip) if (err < 0) goto out_free; + setup_vga_switcheroo_runtime_pm(chip); + chip->running = 1; azx_add_card_list(chip); - val = power_save; -#ifdef CONFIG_PM - if (pm_blacklist) { - const struct snd_pci_quirk *q; - - q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); - if (q && val) { - dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", - q->subvendor, q->subdevice); - val = 0; - } - } -#endif /* CONFIG_PM */ - /* - * The discrete GPU cannot power down unless the HDA controller runtime - * suspends, so activate runtime PM on codecs even if power_save == 0. - */ - if (use_vga_switcheroo(hda)) - list_for_each_codec(codec, &chip->bus) - codec->auto_runtime_pm = 1; + set_default_power_save(chip); - snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip)) pm_runtime_put_autosuspend(&pci->dev); diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h index e3a3d318d2e5..f59719e06b91 100644 --- a/sound/pci/hda/hda_intel.h +++ b/sound/pci/hda/hda_intel.h @@ -37,6 +37,7 @@ struct hda_intel { /* vga_switcheroo setup */ unsigned int use_vga_switcheroo:1; + unsigned int need_eld_notify_link:1; unsigned int vga_switcheroo_registered:1; unsigned int init_failed:1; /* delayed init failed */ -- cgit v1.2.3-59-g8ed1b From f5b9bac7451cfc962970cb3fa3a7027ffa69e369 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 11 Sep 2018 14:22:23 -0700 Subject: net_sched: notify filter deletion when deleting a chain When we delete a chain of filters, we need to notify user-space we are deleting each filters in this chain too. Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Cc: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/cls_api.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 1a67af8a6e8c..0a75cb2e5e7b 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -1902,6 +1902,8 @@ replay: RTM_NEWCHAIN, false); break; case RTM_DELCHAIN: + tfilter_notify_chain(net, skb, block, q, parent, n, + chain, RTM_DELTFILTER); /* Flush the chain first as the user requested chain removal. */ tcf_chain_flush(chain); /* In case the chain was successfully deleted, put a reference -- cgit v1.2.3-59-g8ed1b From 5fe23f262e0548ca7f19fb79f89059a60d087d22 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 12 Sep 2018 16:27:44 -0700 Subject: ucma: fix a use-after-free in ucma_resolve_ip() There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe Cc: Doug Ledford Cc: Leon Romanovsky Signed-off-by: Cong Wang Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/ucma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 5f437d1570fb..21863ddde63e 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -1759,6 +1759,8 @@ static int ucma_close(struct inode *inode, struct file *filp) mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); + ucma_put_ctx(ctx); + wait_for_completion(&ctx->comp); /* rdma_destroy_id ensures that no event handlers are * inflight for that id before releasing it. */ -- cgit v1.2.3-59-g8ed1b From 018349d70f28a78d5343b3660cb66e1667005f8a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 13 Sep 2018 08:03:43 -0700 Subject: hv_netvsc: fix schedule in RCU context When netvsc device is removed it can call reschedule in RCU context. This happens because canceling the subchannel setup work could (in theory) cause a reschedule when manipulating the timer. To reproduce, run with lockdep enabled kernel and unbind a network device from hv_netvsc (via sysfs). [ 160.682011] WARNING: suspicious RCU usage [ 160.707466] 4.19.0-rc3-uio+ #2 Not tainted [ 160.709937] ----------------------------- [ 160.712352] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section! [ 160.723691] [ 160.723691] other info that might help us debug this: [ 160.723691] [ 160.730955] [ 160.730955] rcu_scheduler_active = 2, debug_locks = 1 [ 160.762813] 5 locks held by rebind-eth.sh/1812: [ 160.766851] #0: 000000008befa37a (sb_writers#6){.+.+}, at: vfs_write+0x184/0x1b0 [ 160.773416] #1: 00000000b097f236 (&of->mutex){+.+.}, at: kernfs_fop_write+0xe2/0x1a0 [ 160.783766] #2: 0000000041ee6889 (kn->count#3){++++}, at: kernfs_fop_write+0xeb/0x1a0 [ 160.787465] #3: 0000000056d92a74 (&dev->mutex){....}, at: device_release_driver_internal+0x39/0x250 [ 160.816987] #4: 0000000030f6031e (rcu_read_lock){....}, at: netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.828629] [ 160.828629] stack backtrace: [ 160.831966] CPU: 1 PID: 1812 Comm: rebind-eth.sh Not tainted 4.19.0-rc3-uio+ #2 [ 160.832952] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 160.832952] Call Trace: [ 160.832952] dump_stack+0x85/0xcb [ 160.832952] ___might_sleep+0x1a3/0x240 [ 160.832952] __flush_work+0x57/0x2e0 [ 160.832952] ? __mutex_lock+0x83/0x990 [ 160.832952] ? __kernfs_remove+0x24f/0x2e0 [ 160.832952] ? __kernfs_remove+0x1b2/0x2e0 [ 160.832952] ? mark_held_locks+0x50/0x80 [ 160.832952] ? get_work_pool+0x90/0x90 [ 160.832952] __cancel_work_timer+0x13c/0x1e0 [ 160.832952] ? netvsc_remove+0x1e/0x250 [hv_netvsc] [ 160.832952] ? __lock_is_held+0x55/0x90 [ 160.832952] netvsc_remove+0x9a/0x250 [hv_netvsc] [ 160.832952] vmbus_remove+0x26/0x30 [ 160.832952] device_release_driver_internal+0x18a/0x250 [ 160.832952] unbind_store+0xb4/0x180 [ 160.832952] kernfs_fop_write+0x113/0x1a0 [ 160.832952] __vfs_write+0x36/0x1a0 [ 160.832952] ? rcu_read_lock_sched_held+0x6b/0x80 [ 160.832952] ? rcu_sync_lockdep_assert+0x2e/0x60 [ 160.832952] ? __sb_start_write+0x141/0x1a0 [ 160.832952] ? vfs_write+0x184/0x1b0 [ 160.832952] vfs_write+0xbe/0x1b0 [ 160.832952] ksys_write+0x55/0xc0 [ 160.832952] do_syscall_64+0x60/0x1b0 [ 160.832952] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 160.832952] RIP: 0033:0x7fe48f4c8154 Resolve this by getting RTNL earlier. This is safe because the subchannel work queue does trylock on RTNL and will detect the race. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Stephen Hemminger Reviewed-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 70921bbe0e28..915fbd66a02b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2272,17 +2272,15 @@ static int netvsc_remove(struct hv_device *dev) cancel_delayed_work_sync(&ndev_ctx->dwork); - rcu_read_lock(); - nvdev = rcu_dereference(ndev_ctx->nvdev); - - if (nvdev) + rtnl_lock(); + nvdev = rtnl_dereference(ndev_ctx->nvdev); + if (nvdev) cancel_work_sync(&nvdev->subchan_work); /* * Call to the vsc driver to let it know that the device is being * removed. Also blocks mtu and channel changes. */ - rtnl_lock(); vf_netdev = rtnl_dereference(ndev_ctx->vf_netdev); if (vf_netdev) netvsc_unregister_vf(vf_netdev); @@ -2294,7 +2292,6 @@ static int netvsc_remove(struct hv_device *dev) list_del(&ndev_ctx->list); rtnl_unlock(); - rcu_read_unlock(); hv_set_drvdata(dev, NULL); -- cgit v1.2.3-59-g8ed1b From 9824dfae5741275473a23a7ed5756c7b6efacc9d Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Wed, 12 Sep 2018 07:36:35 +0200 Subject: net/appletalk: fix minor pointer leak to userspace in SIOCFINDIPDDPRT Fields ->dev and ->next of struct ipddp_route may be copied to userspace on the SIOCFINDIPDDPRT ioctl. This is only accessible to CAP_NET_ADMIN though. Let's manually copy the relevant fields instead of using memcpy(). BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Cc: Jann Horn Signed-off-by: Willy Tarreau Signed-off-by: David S. Miller --- drivers/net/appletalk/ipddp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 9375cef22420..3d27616d9c85 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -283,8 +283,12 @@ static int ipddp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCFINDIPDDPRT: spin_lock_bh(&ipddp_route_lock); rp = __ipddp_find_route(&rcp); - if (rp) - memcpy(&rcp2, rp, sizeof(rcp2)); + if (rp) { + memset(&rcp2, 0, sizeof(rcp2)); + rcp2.ip = rp->ip; + rcp2.at = rp->at; + rcp2.flags = rp->flags; + } spin_unlock_bh(&ipddp_route_lock); if (rp) { -- cgit v1.2.3-59-g8ed1b From 56a49d7048703f5ffdb84d3a0ee034108fba6850 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Wed, 12 Sep 2018 13:21:48 -0700 Subject: net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags This fix addresses https://bugzilla.kernel.org/show_bug.cgi?id=201071 Commit 5025f7f7d506 wrongly relied on __dev_change_flags to notify users of dev flag changes in the case when dev->rtnl_link_state = RTNL_LINK_INITIALIZED. Fix it by indicating flag changes explicitly to __dev_notify_flags. Fixes: 5025f7f7d506 ("rtnetlink: add rtnl_link_state check in rtnl_configure_link") Reported-By: Liam mcbirnie Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 60c928894a78..63ce2283a456 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2810,7 +2810,7 @@ int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm) } if (dev->rtnl_link_state == RTNL_LINK_INITIALIZED) { - __dev_notify_flags(dev, old_flags, 0U); + __dev_notify_flags(dev, old_flags, (old_flags ^ dev->flags)); } else { dev->rtnl_link_state = RTNL_LINK_INITIALIZED; __dev_notify_flags(dev, old_flags, ~0U); -- cgit v1.2.3-59-g8ed1b From f0e0d04413fcce9bc76388839099aee93cd0d33b Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Thu, 13 Sep 2018 11:12:03 -0700 Subject: neighbour: confirm neigh entries when ARP packet is received Update 'confirmed' timestamp when ARP packet is received. It shouldn't affect locktime logic and anyway entry can be confirmed by any higher-layer protocol. Thus it makes sense to confirm it when ARP packet is received. Fixes: 77d7123342dc ("neighbour: update neigh timestamps iff update is effective") Signed-off-by: Vasily Khoruzhick Signed-off-by: David S. Miller --- net/core/neighbour.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index aa19d86937af..91592fceeaad 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1180,6 +1180,12 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, lladdr = neigh->ha; } + /* Update confirmed timestamp for neighbour entry after we + * received ARP packet even if it doesn't change IP to MAC binding. + */ + if (new & NUD_CONNECTED) + neigh->confirmed = jiffies; + /* If entry was valid and address is not changed, do not change entry state, if new one is STALE. */ @@ -1201,15 +1207,12 @@ int neigh_update(struct neighbour *neigh, const u8 *lladdr, u8 new, } } - /* Update timestamps only once we know we will make a change to the + /* Update timestamp only once we know we will make a change to the * neighbour entry. Otherwise we risk to move the locktime window with * noop updates and ignore relevant ARP updates. */ - if (new != old || lladdr != neigh->ha) { - if (new & NUD_CONNECTED) - neigh->confirmed = jiffies; + if (new != old || lladdr != neigh->ha) neigh->updated = jiffies; - } if (new != old) { neigh_del_timer(neigh); -- cgit v1.2.3-59-g8ed1b From 7cba09c6d5bc73ebbd25a353742d9ddb7a713b95 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Wed, 12 Sep 2018 17:44:41 +0200 Subject: tls: don't copy the key out of tls12_crypto_info_aes_gcm_128 There's no need to copy the key to an on-stack buffer before calling crypto_aead_setkey(). Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index e28a6ff25d96..f29b7c49cbf2 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1136,7 +1136,6 @@ void tls_sw_free_resources_rx(struct sock *sk) int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) { - char keyval[TLS_CIPHER_AES_GCM_128_KEY_SIZE]; struct tls_crypto_info *crypto_info; struct tls12_crypto_info_aes_gcm_128 *gcm_128_info; struct tls_sw_context_tx *sw_ctx_tx = NULL; @@ -1265,9 +1264,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) ctx->push_pending_record = tls_sw_push_pending_record; - memcpy(keyval, gcm_128_info->key, TLS_CIPHER_AES_GCM_128_KEY_SIZE); - - rc = crypto_aead_setkey(*aead, keyval, + rc = crypto_aead_setkey(*aead, gcm_128_info->key, TLS_CIPHER_AES_GCM_128_KEY_SIZE); if (rc) goto free_aead; -- cgit v1.2.3-59-g8ed1b From 86029d10af18381814881d6cce2dd6872163b59f Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Wed, 12 Sep 2018 17:44:42 +0200 Subject: tls: zero the crypto information from tls_context before freeing This contains key material in crypto_send_aes_gcm_128 and crypto_recv_aes_gcm_128. Introduce union tls_crypto_context, and replace the two identical unions directly embedded in struct tls_context with it. We can then use this union to clean up the memory in the new tls_ctx_free() function. Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- include/net/tls.h | 19 +++++++++---------- net/tls/tls_device.c | 6 +++--- net/tls/tls_device_fallback.c | 2 +- net/tls/tls_main.c | 20 +++++++++++++++----- net/tls/tls_sw.c | 8 ++++---- 5 files changed, 32 insertions(+), 23 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index d5c683e8bb22..0a769cf2f5f3 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -171,15 +171,14 @@ struct cipher_context { char *rec_seq; }; +union tls_crypto_context { + struct tls_crypto_info info; + struct tls12_crypto_info_aes_gcm_128 aes_gcm_128; +}; + struct tls_context { - union { - struct tls_crypto_info crypto_send; - struct tls12_crypto_info_aes_gcm_128 crypto_send_aes_gcm_128; - }; - union { - struct tls_crypto_info crypto_recv; - struct tls12_crypto_info_aes_gcm_128 crypto_recv_aes_gcm_128; - }; + union tls_crypto_context crypto_send; + union tls_crypto_context crypto_recv; struct list_head list; struct net_device *netdev; @@ -367,8 +366,8 @@ static inline void tls_fill_prepend(struct tls_context *ctx, * size KTLS_DTLS_HEADER_SIZE + KTLS_DTLS_NONCE_EXPLICIT_SIZE */ buf[0] = record_type; - buf[1] = TLS_VERSION_MINOR(ctx->crypto_send.version); - buf[2] = TLS_VERSION_MAJOR(ctx->crypto_send.version); + buf[1] = TLS_VERSION_MINOR(ctx->crypto_send.info.version); + buf[2] = TLS_VERSION_MAJOR(ctx->crypto_send.info.version); /* we can use IV for nonce explicit according to spec */ buf[3] = pkt_len >> 8; buf[4] = pkt_len & 0xFF; diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index 292742e50bfa..961b07d4d41c 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -686,7 +686,7 @@ int tls_set_device_offload(struct sock *sk, struct tls_context *ctx) goto free_marker_record; } - crypto_info = &ctx->crypto_send; + crypto_info = &ctx->crypto_send.info; switch (crypto_info->cipher_type) { case TLS_CIPHER_AES_GCM_128: nonce_size = TLS_CIPHER_AES_GCM_128_IV_SIZE; @@ -780,7 +780,7 @@ int tls_set_device_offload(struct sock *sk, struct tls_context *ctx) ctx->priv_ctx_tx = offload_ctx; rc = netdev->tlsdev_ops->tls_dev_add(netdev, sk, TLS_OFFLOAD_CTX_DIR_TX, - &ctx->crypto_send, + &ctx->crypto_send.info, tcp_sk(sk)->write_seq); if (rc) goto release_netdev; @@ -862,7 +862,7 @@ int tls_set_device_offload_rx(struct sock *sk, struct tls_context *ctx) goto release_ctx; rc = netdev->tlsdev_ops->tls_dev_add(netdev, sk, TLS_OFFLOAD_CTX_DIR_RX, - &ctx->crypto_recv, + &ctx->crypto_recv.info, tcp_sk(sk)->copied_seq); if (rc) { pr_err_ratelimited("%s: The netdev has refused to offload this socket\n", diff --git a/net/tls/tls_device_fallback.c b/net/tls/tls_device_fallback.c index 6102169239d1..450a6dbc5a88 100644 --- a/net/tls/tls_device_fallback.c +++ b/net/tls/tls_device_fallback.c @@ -320,7 +320,7 @@ static struct sk_buff *tls_enc_skb(struct tls_context *tls_ctx, goto free_req; iv = buf; - memcpy(iv, tls_ctx->crypto_send_aes_gcm_128.salt, + memcpy(iv, tls_ctx->crypto_send.aes_gcm_128.salt, TLS_CIPHER_AES_GCM_128_SALT_SIZE); aad = buf + TLS_CIPHER_AES_GCM_128_SALT_SIZE + TLS_CIPHER_AES_GCM_128_IV_SIZE; diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 180b6640e531..737b3865be1b 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -241,6 +241,16 @@ static void tls_write_space(struct sock *sk) ctx->sk_write_space(sk); } +static void tls_ctx_free(struct tls_context *ctx) +{ + if (!ctx) + return; + + memzero_explicit(&ctx->crypto_send, sizeof(ctx->crypto_send)); + memzero_explicit(&ctx->crypto_recv, sizeof(ctx->crypto_recv)); + kfree(ctx); +} + static void tls_sk_proto_close(struct sock *sk, long timeout) { struct tls_context *ctx = tls_get_ctx(sk); @@ -294,7 +304,7 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) #else { #endif - kfree(ctx); + tls_ctx_free(ctx); ctx = NULL; } @@ -305,7 +315,7 @@ skip_tx_cleanup: * for sk->sk_prot->unhash [tls_hw_unhash] */ if (free_ctx) - kfree(ctx); + tls_ctx_free(ctx); } static int do_tls_getsockopt_tx(struct sock *sk, char __user *optval, @@ -330,7 +340,7 @@ static int do_tls_getsockopt_tx(struct sock *sk, char __user *optval, } /* get user crypto info */ - crypto_info = &ctx->crypto_send; + crypto_info = &ctx->crypto_send.info; if (!TLS_CRYPTO_INFO_READY(crypto_info)) { rc = -EBUSY; @@ -417,9 +427,9 @@ static int do_tls_setsockopt_conf(struct sock *sk, char __user *optval, } if (tx) - crypto_info = &ctx->crypto_send; + crypto_info = &ctx->crypto_send.info; else - crypto_info = &ctx->crypto_recv; + crypto_info = &ctx->crypto_recv.info; /* Currently we don't support set crypto info more than one time */ if (TLS_CRYPTO_INFO_READY(crypto_info)) { diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index f29b7c49cbf2..9e918489f4fb 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1055,8 +1055,8 @@ static int tls_read_size(struct strparser *strp, struct sk_buff *skb) goto read_failure; } - if (header[1] != TLS_VERSION_MINOR(tls_ctx->crypto_recv.version) || - header[2] != TLS_VERSION_MAJOR(tls_ctx->crypto_recv.version)) { + if (header[1] != TLS_VERSION_MINOR(tls_ctx->crypto_recv.info.version) || + header[2] != TLS_VERSION_MAJOR(tls_ctx->crypto_recv.info.version)) { ret = -EINVAL; goto read_failure; } @@ -1180,12 +1180,12 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) if (tx) { crypto_init_wait(&sw_ctx_tx->async_wait); - crypto_info = &ctx->crypto_send; + crypto_info = &ctx->crypto_send.info; cctx = &ctx->tx; aead = &sw_ctx_tx->aead_send; } else { crypto_init_wait(&sw_ctx_rx->async_wait); - crypto_info = &ctx->crypto_recv; + crypto_info = &ctx->crypto_recv.info; cctx = &ctx->rx; aead = &sw_ctx_rx->aead_recv; } -- cgit v1.2.3-59-g8ed1b From c844eb46b7d43c2cf760169df5ae1d5b033af338 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Wed, 12 Sep 2018 17:44:43 +0200 Subject: tls: clear key material from kernel memory when do_tls_setsockopt_conf fails Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Sabrina Dubroca Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/tls/tls_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 737b3865be1b..523622dc74f8 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -509,7 +509,7 @@ static int do_tls_setsockopt_conf(struct sock *sk, char __user *optval, goto out; err_crypto_info: - memset(crypto_info, 0, sizeof(*crypto_info)); + memzero_explicit(crypto_info, sizeof(union tls_crypto_context)); out: return rc; } -- cgit v1.2.3-59-g8ed1b From c56cae23c6b167acc68043c683c4573b80cbcc2c Mon Sep 17 00:00:00 2001 From: Toke Høiland-Jørgensen Date: Thu, 13 Sep 2018 16:43:07 +0200 Subject: gso_segment: Reset skb->mac_len after modifying network header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When splitting a GSO segment that consists of encapsulated packets, the skb->mac_len of the segments can end up being set wrong, causing packet drops in particular when using act_mirred and ifb interfaces in combination with a qdisc that splits GSO packets. This happens because at the time skb_segment() is called, network_header will point to the inner header, throwing off the calculation in skb_reset_mac_len(). The network_header is subsequently adjust by the outer IP gso_segment handlers, but they don't set the mac_len. Fix this by adding skb_reset_mac_len() calls to both the IPv4 and IPv6 gso_segment handlers, after they modify the network_header. Many thanks to Eric Dumazet for his help in identifying the cause of the bug. Acked-by: Dave Taht Reviewed-by: Eric Dumazet Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 1 + net/ipv6/ip6_offload.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 20fda8fb8ffd..1fbe2f815474 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1377,6 +1377,7 @@ struct sk_buff *inet_gso_segment(struct sk_buff *skb, if (encap) skb_reset_inner_headers(skb); skb->network_header = (u8 *)iph - skb->head; + skb_reset_mac_len(skb); } while ((skb = skb->next)); out: diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c index 37ff4805b20c..c7e495f12011 100644 --- a/net/ipv6/ip6_offload.c +++ b/net/ipv6/ip6_offload.c @@ -115,6 +115,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, payload_len = skb->len - nhoff - sizeof(*ipv6h); ipv6h->payload_len = htons(payload_len); skb->network_header = (u8 *)ipv6h - skb->head; + skb_reset_mac_len(skb); if (udpfrag) { int err = ip6_find_1stfragopt(skb, &prevhdr); -- cgit v1.2.3-59-g8ed1b From 1cebf8f143c21eb422cd0f4e27ab2ae366eb4d04 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Sep 2018 14:40:55 +0200 Subject: socket: fix struct ifreq size in compat ioctl As reported by Reobert O'Callahan, since Viro's commit to kill dev_ifsioc() we attempt to copy too much data in compat mode, which may lead to EFAULT when the 32-bit version of struct ifreq sits at/near the end of a page boundary, and the next page isn't mapped. Fix this by passing the approprate compat/non-compat size to copy and using that, as before the dev_ifsioc() removal. This works because only the embedded "struct ifmap" has different size, and this is only used in SIOCGIFMAP/SIOCSIFMAP which has a different handler. All other parts of the union are naturally compatible. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199469. Fixes: bf4405737f9f ("kill dev_ifsioc()") Reported-by: Robert O'Callahan Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/socket.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/net/socket.c b/net/socket.c index e6945e318f02..01f3f8f32d6f 100644 --- a/net/socket.c +++ b/net/socket.c @@ -941,7 +941,8 @@ void dlci_ioctl_set(int (*hook) (unsigned int, void __user *)) EXPORT_SYMBOL(dlci_ioctl_set); static long sock_do_ioctl(struct net *net, struct socket *sock, - unsigned int cmd, unsigned long arg) + unsigned int cmd, unsigned long arg, + unsigned int ifreq_size) { int err; void __user *argp = (void __user *)arg; @@ -967,11 +968,11 @@ static long sock_do_ioctl(struct net *net, struct socket *sock, } else { struct ifreq ifr; bool need_copyout; - if (copy_from_user(&ifr, argp, sizeof(struct ifreq))) + if (copy_from_user(&ifr, argp, ifreq_size)) return -EFAULT; err = dev_ioctl(net, cmd, &ifr, &need_copyout); if (!err && need_copyout) - if (copy_to_user(argp, &ifr, sizeof(struct ifreq))) + if (copy_to_user(argp, &ifr, ifreq_size)) return -EFAULT; } return err; @@ -1070,7 +1071,8 @@ static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg) err = open_related_ns(&net->ns, get_net_ns); break; default: - err = sock_do_ioctl(net, sock, cmd, arg); + err = sock_do_ioctl(net, sock, cmd, arg, + sizeof(struct ifreq)); break; } return err; @@ -2750,7 +2752,8 @@ static int do_siocgstamp(struct net *net, struct socket *sock, int err; set_fs(KERNEL_DS); - err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv); + err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv, + sizeof(struct compat_ifreq)); set_fs(old_fs); if (!err) err = compat_put_timeval(&ktv, up); @@ -2766,7 +2769,8 @@ static int do_siocgstampns(struct net *net, struct socket *sock, int err; set_fs(KERNEL_DS); - err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts); + err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts, + sizeof(struct compat_ifreq)); set_fs(old_fs); if (!err) err = compat_put_timespec(&kts, up); @@ -3072,7 +3076,8 @@ static int routing_ioctl(struct net *net, struct socket *sock, } set_fs(KERNEL_DS); - ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r); + ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r, + sizeof(struct compat_ifreq)); set_fs(old_fs); out: @@ -3185,7 +3190,8 @@ static int compat_sock_ioctl_trans(struct file *file, struct socket *sock, case SIOCBONDSETHWADDR: case SIOCBONDCHANGEACTIVE: case SIOCGIFNAME: - return sock_do_ioctl(net, sock, cmd, arg); + return sock_do_ioctl(net, sock, cmd, arg, + sizeof(struct compat_ifreq)); } return -ENOIOCTLCMD; -- cgit v1.2.3-59-g8ed1b From 24568b47d48ec8c906fd0f589489a08b17e1edca Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Wed, 5 Sep 2018 09:26:41 +0200 Subject: crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2 It turns out OSXSAVE needs to be checked only for AVX, not for SSE. Without this patch the affected modules refuse to load on CPUs with SSE2 but without AVX support. Fixes: 877ccce7cbe8 ("crypto: x86/aegis,morus - Fix and simplify CPUID checks") Cc: # 4.18 Reported-by: Zdenek Kaspar Signed-off-by: Ondrej Mosnacek Signed-off-by: Herbert Xu --- arch/x86/crypto/aegis128-aesni-glue.c | 1 - arch/x86/crypto/aegis128l-aesni-glue.c | 1 - arch/x86/crypto/aegis256-aesni-glue.c | 1 - arch/x86/crypto/morus1280-sse2-glue.c | 1 - arch/x86/crypto/morus640-sse2-glue.c | 1 - 5 files changed, 5 deletions(-) diff --git a/arch/x86/crypto/aegis128-aesni-glue.c b/arch/x86/crypto/aegis128-aesni-glue.c index acd11b3bf639..2a356b948720 100644 --- a/arch/x86/crypto/aegis128-aesni-glue.c +++ b/arch/x86/crypto/aegis128-aesni-glue.c @@ -379,7 +379,6 @@ static int __init crypto_aegis128_aesni_module_init(void) { if (!boot_cpu_has(X86_FEATURE_XMM2) || !boot_cpu_has(X86_FEATURE_AES) || - !boot_cpu_has(X86_FEATURE_OSXSAVE) || !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL)) return -ENODEV; diff --git a/arch/x86/crypto/aegis128l-aesni-glue.c b/arch/x86/crypto/aegis128l-aesni-glue.c index 2071c3d1ae07..dbe8bb980da1 100644 --- a/arch/x86/crypto/aegis128l-aesni-glue.c +++ b/arch/x86/crypto/aegis128l-aesni-glue.c @@ -379,7 +379,6 @@ static int __init crypto_aegis128l_aesni_module_init(void) { if (!boot_cpu_has(X86_FEATURE_XMM2) || !boot_cpu_has(X86_FEATURE_AES) || - !boot_cpu_has(X86_FEATURE_OSXSAVE) || !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL)) return -ENODEV; diff --git a/arch/x86/crypto/aegis256-aesni-glue.c b/arch/x86/crypto/aegis256-aesni-glue.c index b5f2a8fd5a71..8bebda2de92f 100644 --- a/arch/x86/crypto/aegis256-aesni-glue.c +++ b/arch/x86/crypto/aegis256-aesni-glue.c @@ -379,7 +379,6 @@ static int __init crypto_aegis256_aesni_module_init(void) { if (!boot_cpu_has(X86_FEATURE_XMM2) || !boot_cpu_has(X86_FEATURE_AES) || - !boot_cpu_has(X86_FEATURE_OSXSAVE) || !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL)) return -ENODEV; diff --git a/arch/x86/crypto/morus1280-sse2-glue.c b/arch/x86/crypto/morus1280-sse2-glue.c index 95cf857d2cbb..f40244eaf14d 100644 --- a/arch/x86/crypto/morus1280-sse2-glue.c +++ b/arch/x86/crypto/morus1280-sse2-glue.c @@ -40,7 +40,6 @@ MORUS1280_DECLARE_ALGS(sse2, "morus1280-sse2", 350); static int __init crypto_morus1280_sse2_module_init(void) { if (!boot_cpu_has(X86_FEATURE_XMM2) || - !boot_cpu_has(X86_FEATURE_OSXSAVE) || !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL)) return -ENODEV; diff --git a/arch/x86/crypto/morus640-sse2-glue.c b/arch/x86/crypto/morus640-sse2-glue.c index 615fb7bc9a32..9afaf8f8565a 100644 --- a/arch/x86/crypto/morus640-sse2-glue.c +++ b/arch/x86/crypto/morus640-sse2-glue.c @@ -40,7 +40,6 @@ MORUS640_DECLARE_ALGS(sse2, "morus640-sse2", 400); static int __init crypto_morus640_sse2_module_init(void) { if (!boot_cpu_has(X86_FEATURE_XMM2) || - !boot_cpu_has(X86_FEATURE_OSXSAVE) || !cpu_has_xfeatures(XFEATURE_MASK_SSE, NULL)) return -ENODEV; -- cgit v1.2.3-59-g8ed1b From 34043d250f51368f214aed7f54c2dc29c819a8c7 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 14 Sep 2018 12:03:18 +0200 Subject: net/sched: act_sample: fix NULL dereference in the data path Matteo reported the following splat, testing the datapath of TC 'sample': BUG: KASAN: null-ptr-deref in tcf_sample_act+0xc4/0x310 Read of size 8 at addr 0000000000000000 by task nc/433 CPU: 0 PID: 433 Comm: nc Not tainted 4.19.0-rc3-kvm #17 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014 Call Trace: kasan_report.cold.6+0x6c/0x2fa tcf_sample_act+0xc4/0x310 ? dev_hard_start_xmit+0x117/0x180 tcf_action_exec+0xa3/0x160 tcf_classify+0xdd/0x1d0 htb_enqueue+0x18e/0x6b0 ? deref_stack_reg+0x7a/0xb0 ? htb_delete+0x4b0/0x4b0 ? unwind_next_frame+0x819/0x8f0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 __dev_queue_xmit+0x722/0xca0 ? unwind_get_return_address_ptr+0x50/0x50 ? netdev_pick_tx+0xe0/0xe0 ? save_stack+0x8c/0xb0 ? kasan_kmalloc+0xbe/0xd0 ? __kmalloc_track_caller+0xe4/0x1c0 ? __kmalloc_reserve.isra.45+0x24/0x70 ? __alloc_skb+0xdd/0x2e0 ? sk_stream_alloc_skb+0x91/0x3b0 ? tcp_sendmsg_locked+0x71b/0x15a0 ? tcp_sendmsg+0x22/0x40 ? __sys_sendto+0x1b0/0x250 ? __x64_sys_sendto+0x6f/0x80 ? do_syscall_64+0x5d/0x150 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? __sys_sendto+0x1b0/0x250 ? __x64_sys_sendto+0x6f/0x80 ? do_syscall_64+0x5d/0x150 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip_finish_output2+0x495/0x590 ? ip_copy_metadata+0x2e0/0x2e0 ? skb_gso_validate_network_len+0x6f/0x110 ? ip_finish_output+0x174/0x280 __tcp_transmit_skb+0xb17/0x12b0 ? __tcp_select_window+0x380/0x380 tcp_write_xmit+0x913/0x1de0 ? __sk_mem_schedule+0x50/0x80 tcp_sendmsg_locked+0x49d/0x15a0 ? tcp_rcv_established+0x8da/0xa30 ? tcp_set_state+0x220/0x220 ? clear_user+0x1f/0x50 ? iov_iter_zero+0x1ae/0x590 ? __fget_light+0xa0/0xe0 tcp_sendmsg+0x22/0x40 __sys_sendto+0x1b0/0x250 ? __ia32_sys_getpeername+0x40/0x40 ? _copy_to_user+0x58/0x70 ? poll_select_copy_remaining+0x176/0x200 ? __pollwait+0x1c0/0x1c0 ? ktime_get_ts64+0x11f/0x140 ? kern_select+0x108/0x150 ? core_sys_select+0x360/0x360 ? vfs_read+0x127/0x150 ? kernel_write+0x90/0x90 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x5d/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fefef2b129d Code: ff ff ff ff eb b6 0f 1f 80 00 00 00 00 48 8d 05 51 37 0c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007fff2f5350c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000056118d60c120 RCX: 00007fefef2b129d RDX: 0000000000002000 RSI: 000056118d629320 RDI: 0000000000000003 RBP: 000056118d530370 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000002000 R13: 000056118d5c2a10 R14: 000056118d5c2a10 R15: 000056118d5303b8 tcf_sample_act() tried to update its per-cpu stats, but tcf_sample_init() forgot to allocate them, because tcf_idr_create() was called with a wrong value of 'cpustats'. Setting it to true proved to fix the reported crash. Reported-by: Matteo Croce Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR") Fixes: 5c5670fae430 ("net/sched: Introduce sample tc action") Tested-by: Matteo Croce Signed-off-by: Davide Caratti Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- net/sched/act_sample.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c index 44e9c00657bc..6b67aa13d2dd 100644 --- a/net/sched/act_sample.c +++ b/net/sched/act_sample.c @@ -69,7 +69,7 @@ static int tcf_sample_init(struct net *net, struct nlattr *nla, if (!exists) { ret = tcf_idr_create(tn, parm->index, est, a, - &act_sample_ops, bind, false); + &act_sample_ops, bind, true); if (ret) { tcf_idr_cleanup(tn, parm->index); return ret; -- cgit v1.2.3-59-g8ed1b From dabeb13eee81329338b1f8f330dfcc37a86714d7 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 14 Sep 2018 10:47:14 +0200 Subject: batman-adv: Increase version number to 2018.3 Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/main.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h index 8da3c9336111..3ccc75ee719c 100644 --- a/net/batman-adv/main.h +++ b/net/batman-adv/main.h @@ -25,7 +25,7 @@ #define BATADV_DRIVER_DEVICE "batman-adv" #ifndef BATADV_SOURCE_VERSION -#define BATADV_SOURCE_VERSION "2018.2" +#define BATADV_SOURCE_VERSION "2018.3" #endif /* B.A.T.M.A.N. parameters */ -- cgit v1.2.3-59-g8ed1b From 1a866306e0fbf3caab168c1389e4497702749441 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 12 Sep 2018 16:34:27 +0200 Subject: drm/etnaviv: add DMA configuration for etnaviv platform device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The etnaviv device is a virtual device backing the DRM device, which may drive multiple hardware GPU core devices. As most of the dma-mapping handling is done through the virtual device, we need to make sure that a proper DMA setup is in place. The easiest way to get a reasonable configuration is to let the virtual device share the DMA configuration with one of the GPU devices, so call of_dma_configure() with the right parameters manually. This assumes that all etnaviv driven GPU devices in the system share the same DMA configuration. If we ever encounter a SoC where the GPUs are on busses with different offsets or behind different IOMMUs that will require much deeper changes to the driver, as we would need to implement etnaviv specific versions of most of the DRM helper functions. For now we should be fine with this solution. Signed-off-by: Lucas Stach Tested-by: Guido Günther Tested-by: Eugeniy Paltsev --- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index 9b2720b41571..83c1f46670bf 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -592,8 +592,6 @@ static int etnaviv_pdev_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct component_match *match = NULL; - dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (!dev->platform_data) { struct device_node *core_node; @@ -655,13 +653,30 @@ static int __init etnaviv_init(void) for_each_compatible_node(np, NULL, "vivante,gc") { if (!of_device_is_available(np)) continue; - pdev = platform_device_register_simple("etnaviv", -1, - NULL, 0); - if (IS_ERR(pdev)) { - ret = PTR_ERR(pdev); + + pdev = platform_device_alloc("etnaviv", -1); + if (!pdev) { + ret = -ENOMEM; + of_node_put(np); + goto unregister_platform_driver; + } + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40); + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + + /* + * Apply the same DMA configuration to the virtual etnaviv + * device as the GPU we found. This assumes that all Vivante + * GPUs in the system share the same DMA constraints. + */ + of_dma_configure(&pdev->dev, np, true); + + ret = platform_device_add(pdev); + if (ret) { + platform_device_put(pdev); of_node_put(np); goto unregister_platform_driver; } + etnaviv_drm = pdev; of_node_put(np); break; -- cgit v1.2.3-59-g8ed1b From cf51e4b9c34407bf0c3d9b582b7837e047e1df47 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 13 Sep 2018 14:58:49 +0900 Subject: mtd: rawnand: denali: fix a race condition when DMA is kicked I thought the read-back of the DMA_ENABLE register was unnecessary (at least it is working on my boards), then deleted it in commit 586a2c52909d ("mtd: nand: denali: squash denali_enable_dma() helper into caller"). Sorry, I was wrong - it caused a timing issue on Cyclone5 SoCFPGAs. Revive the register read-back, commenting why this is necessary. Fixes: 586a2c52909d ("mtd: nand: denali: squash denali_enable_dma() helper into caller") Cc: Reported-by: Steffen Trumtrar Signed-off-by: Masahiro Yamada Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/denali.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c index 67b2065e7a19..b864b93dd289 100644 --- a/drivers/mtd/nand/raw/denali.c +++ b/drivers/mtd/nand/raw/denali.c @@ -596,6 +596,12 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, } iowrite32(DMA_ENABLE__FLAG, denali->reg + DMA_ENABLE); + /* + * The ->setup_dma() hook kicks DMA by using the data/command + * interface, which belongs to a different AXI port from the + * register interface. Read back the register to avoid a race. + */ + ioread32(denali->reg + DMA_ENABLE); denali_reset_irq(denali); denali->setup_dma(denali, dma_addr, page, write); -- cgit v1.2.3-59-g8ed1b From 37196ba4ae95a2077d78715eb12e879e57613d43 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 13 Sep 2018 19:43:58 -0700 Subject: hwmon: (nct6775) Fix virtual temperature sources for NCT6796D The following kernel log message is reported for the nct6775 driver on ASUS WS X299 SAGE. nct6775: Found NCT6796D or compatible chip at 0x2e:0x290 nct6775 nct6775.656: Invalid temperature source 11 at index 0, source register 0x100, temp register 0x73 nct6775 nct6775.656: Invalid temperature source 11 at index 2, source register 0x300, temp register 0x77 nct6775 nct6775.656: Invalid temperature source 11 at index 3, source register 0x800, temp register 0x79 nct6775 nct6775.656: Invalid temperature source 11 at index 4, source register 0x900, temp register 0x7b A recent version of the datasheet lists temperature source 11 as reserved. However, an older version of the datasheet lists temperature sources 10 and 11 as supported virtual temperature sources. Apparently the older version of the datasheet is correct, so list those temperature sources as supported. Virtual temperature sources are different than other temperature sources: Values are not read from a temperature sensor, but written either from BIOS or an embedded controller. As such, each virtual temperature has to be reported. Since there is now more than one temperature source, we have to keep virtual temperature sources in a chip-specific mask and can no longer rely on the assumption that there is only one virtual temperature source with a fixed index. This accounts for most of the complexity of this patch. Reported-by: Robert Kern Cc: Robert Kern Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 87c316c6c341..202a2b422461 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -207,8 +207,6 @@ superio_exit(int ioreg) #define NUM_FAN 7 -#define TEMP_SOURCE_VIRTUAL 0x1f - /* Common and NCT6775 specific data */ /* Voltage min/max registers for nr=7..14 are in bank 5 */ @@ -374,6 +372,7 @@ static const char *const nct6775_temp_label[] = { }; #define NCT6775_TEMP_MASK 0x001ffffe +#define NCT6775_VIRT_TEMP_MASK 0x00000000 static const u16 NCT6775_REG_TEMP_ALTERNATE[32] = { [13] = 0x661, @@ -462,6 +461,7 @@ static const char *const nct6776_temp_label[] = { }; #define NCT6776_TEMP_MASK 0x007ffffe +#define NCT6776_VIRT_TEMP_MASK 0x00000000 static const u16 NCT6776_REG_TEMP_ALTERNATE[32] = { [14] = 0x401, @@ -560,7 +560,9 @@ static const char *const nct6779_temp_label[] = { }; #define NCT6779_TEMP_MASK 0x07ffff7e +#define NCT6779_VIRT_TEMP_MASK 0x00000000 #define NCT6791_TEMP_MASK 0x87ffff7e +#define NCT6791_VIRT_TEMP_MASK 0x80000000 static const u16 NCT6779_REG_TEMP_ALTERNATE[32] = { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0, @@ -639,6 +641,7 @@ static const char *const nct6792_temp_label[] = { }; #define NCT6792_TEMP_MASK 0x9fffff7e +#define NCT6792_VIRT_TEMP_MASK 0x80000000 static const char *const nct6793_temp_label[] = { "", @@ -676,6 +679,7 @@ static const char *const nct6793_temp_label[] = { }; #define NCT6793_TEMP_MASK 0xbfff037e +#define NCT6793_VIRT_TEMP_MASK 0x80000000 static const char *const nct6795_temp_label[] = { "", @@ -713,6 +717,7 @@ static const char *const nct6795_temp_label[] = { }; #define NCT6795_TEMP_MASK 0xbfffff7e +#define NCT6795_VIRT_TEMP_MASK 0x80000000 static const char *const nct6796_temp_label[] = { "", @@ -725,8 +730,8 @@ static const char *const nct6796_temp_label[] = { "AUXTIN4", "SMBUSMASTER 0", "SMBUSMASTER 1", - "", - "", + "Virtual_TEMP", + "Virtual_TEMP", "", "", "", @@ -749,7 +754,8 @@ static const char *const nct6796_temp_label[] = { "Virtual_TEMP" }; -#define NCT6796_TEMP_MASK 0xbfff03fe +#define NCT6796_TEMP_MASK 0xbfff0ffe +#define NCT6796_VIRT_TEMP_MASK 0x80000c00 /* NCT6102D/NCT6106D specific data */ @@ -970,6 +976,7 @@ struct nct6775_data { u16 reg_temp_config[NUM_TEMP]; const char * const *temp_label; u32 temp_mask; + u32 virt_temp_mask; u16 REG_CONFIG; u16 REG_VBAT; @@ -3644,6 +3651,7 @@ static int nct6775_probe(struct platform_device *pdev) data->temp_label = nct6776_temp_label; data->temp_mask = NCT6776_TEMP_MASK; + data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; data->REG_VBAT = NCT6106_REG_VBAT; data->REG_DIODE = NCT6106_REG_DIODE; @@ -3722,6 +3730,7 @@ static int nct6775_probe(struct platform_device *pdev) data->temp_label = nct6775_temp_label; data->temp_mask = NCT6775_TEMP_MASK; + data->virt_temp_mask = NCT6775_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; @@ -3794,6 +3803,7 @@ static int nct6775_probe(struct platform_device *pdev) data->temp_label = nct6776_temp_label; data->temp_mask = NCT6776_TEMP_MASK; + data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; @@ -3866,6 +3876,7 @@ static int nct6775_probe(struct platform_device *pdev) data->temp_label = nct6779_temp_label; data->temp_mask = NCT6779_TEMP_MASK; + data->virt_temp_mask = NCT6779_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; @@ -3949,22 +3960,27 @@ static int nct6775_probe(struct platform_device *pdev) case nct6791: data->temp_label = nct6779_temp_label; data->temp_mask = NCT6791_TEMP_MASK; + data->virt_temp_mask = NCT6791_VIRT_TEMP_MASK; break; case nct6792: data->temp_label = nct6792_temp_label; data->temp_mask = NCT6792_TEMP_MASK; + data->virt_temp_mask = NCT6792_VIRT_TEMP_MASK; break; case nct6793: data->temp_label = nct6793_temp_label; data->temp_mask = NCT6793_TEMP_MASK; + data->virt_temp_mask = NCT6793_VIRT_TEMP_MASK; break; case nct6795: data->temp_label = nct6795_temp_label; data->temp_mask = NCT6795_TEMP_MASK; + data->virt_temp_mask = NCT6795_VIRT_TEMP_MASK; break; case nct6796: data->temp_label = nct6796_temp_label; data->temp_mask = NCT6796_TEMP_MASK; + data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK; break; } @@ -4148,7 +4164,7 @@ static int nct6775_probe(struct platform_device *pdev) * for each fan reflects a different temperature, and there * are no duplicates. */ - if (src != TEMP_SOURCE_VIRTUAL) { + if (!(data->virt_temp_mask & BIT(src))) { if (mask & BIT(src)) continue; mask |= BIT(src); -- cgit v1.2.3-59-g8ed1b From 338affb548c243d2af25b1ca628e67819350de6b Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sat, 15 Sep 2018 14:28:26 -0400 Subject: ext4: show test_dummy_encryption mount option in /proc/mounts When in effect, add "test_dummy_encryption" to _ext4_show_options() so that it is shown in /proc/mounts and other relevant procfs files. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e41da553b430..a430fb3e9720 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2145,6 +2145,8 @@ static int _ext4_show_options(struct seq_file *seq, struct super_block *sb, SEQ_OPTS_PRINT("max_dir_size_kb=%u", sbi->s_max_dir_size_kb); if (test_opt(sb, DATA_ERR_ABORT)) SEQ_OPTS_PUTS("data_err=abort"); + if (DUMMY_ENCRYPTION_ENABLED(sbi)) + SEQ_OPTS_PUTS("test_dummy_encryption"); ext4_show_quota_options(seq, sb); return 0; -- cgit v1.2.3-59-g8ed1b From b3f0907c71e006e12fde74ea9a745b6096b6f90f Mon Sep 17 00:00:00 2001 From: Brijesh Singh Date: Fri, 14 Sep 2018 08:45:58 -0500 Subject: x86/mm: Add .bss..decrypted section to hold shared variables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvmclock defines few static variables which are shared with the hypervisor during the kvmclock initialization. When SEV is active, memory is encrypted with a guest-specific key, and if the guest OS wants to share the memory region with the hypervisor then it must clear the C-bit before sharing it. Currently, we use kernel_physical_mapping_init() to split large pages before clearing the C-bit on shared pages. But it fails when called from the kvmclock initialization (mainly because the memblock allocator is not ready that early during boot). Add a __bss_decrypted section attribute which can be used when defining such shared variable. The so-defined variables will be placed in the .bss..decrypted section. This section will be mapped with C=0 early during boot. The .bss..decrypted section has a big chunk of memory that may be unused when memory encryption is not active, free it when memory encryption is not active. Suggested-by: Thomas Gleixner Signed-off-by: Brijesh Singh Signed-off-by: Thomas Gleixner Cc: Tom Lendacky Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Paolo Bonzini Cc: Sean Christopherson Cc: Radim Krčmář Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com --- arch/x86/include/asm/mem_encrypt.h | 7 +++++++ arch/x86/kernel/head64.c | 16 ++++++++++++++++ arch/x86/kernel/vmlinux.lds.S | 19 +++++++++++++++++++ arch/x86/mm/init.c | 4 ++++ arch/x86/mm/mem_encrypt.c | 24 ++++++++++++++++++++++++ 5 files changed, 70 insertions(+) diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h index c0643831706e..616f8e637bc3 100644 --- a/arch/x86/include/asm/mem_encrypt.h +++ b/arch/x86/include/asm/mem_encrypt.h @@ -48,10 +48,13 @@ int __init early_set_memory_encrypted(unsigned long vaddr, unsigned long size); /* Architecture __weak replacement functions */ void __init mem_encrypt_init(void); +void __init mem_encrypt_free_decrypted_mem(void); bool sme_active(void); bool sev_active(void); +#define __bss_decrypted __attribute__((__section__(".bss..decrypted"))) + #else /* !CONFIG_AMD_MEM_ENCRYPT */ #define sme_me_mask 0ULL @@ -77,6 +80,8 @@ early_set_memory_decrypted(unsigned long vaddr, unsigned long size) { return 0; static inline int __init early_set_memory_encrypted(unsigned long vaddr, unsigned long size) { return 0; } +#define __bss_decrypted + #endif /* CONFIG_AMD_MEM_ENCRYPT */ /* @@ -88,6 +93,8 @@ early_set_memory_encrypted(unsigned long vaddr, unsigned long size) { return 0; #define __sme_pa(x) (__pa(x) | sme_me_mask) #define __sme_pa_nodebug(x) (__pa_nodebug(x) | sme_me_mask) +extern char __start_bss_decrypted[], __end_bss_decrypted[], __start_bss_decrypted_unused[]; + #endif /* __ASSEMBLY__ */ #endif /* __X86_MEM_ENCRYPT_H__ */ diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 8047379e575a..c16af27eb23f 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -112,6 +112,7 @@ static bool __head check_la57_support(unsigned long physaddr) unsigned long __head __startup_64(unsigned long physaddr, struct boot_params *bp) { + unsigned long vaddr, vaddr_end; unsigned long load_delta, *p; unsigned long pgtable_flags; pgdval_t *pgd; @@ -234,6 +235,21 @@ unsigned long __head __startup_64(unsigned long physaddr, /* Encrypt the kernel and related (if SME is active) */ sme_encrypt_kernel(bp); + /* + * Clear the memory encryption mask from the .bss..decrypted section. + * The bss section will be memset to zero later in the initialization so + * there is no need to zero it after changing the memory encryption + * attribute. + */ + if (mem_encrypt_active()) { + vaddr = (unsigned long)__start_bss_decrypted; + vaddr_end = (unsigned long)__end_bss_decrypted; + for (; vaddr < vaddr_end; vaddr += PMD_SIZE) { + i = pmd_index(vaddr); + pmd[i] -= sme_get_me_mask(); + } + } + /* * Return the SME encryption mask (if SME is active) to be used as a * modifier for the initial pgdir entry programmed into CR3. diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 8bde0a419f86..5dd3317d761f 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -65,6 +65,23 @@ jiffies_64 = jiffies; #define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE); #define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE); +/* + * This section contains data which will be mapped as decrypted. Memory + * encryption operates on a page basis. Make this section PMD-aligned + * to avoid splitting the pages while mapping the section early. + * + * Note: We use a separate section so that only this section gets + * decrypted to avoid exposing more than we wish. + */ +#define BSS_DECRYPTED \ + . = ALIGN(PMD_SIZE); \ + __start_bss_decrypted = .; \ + *(.bss..decrypted); \ + . = ALIGN(PAGE_SIZE); \ + __start_bss_decrypted_unused = .; \ + . = ALIGN(PMD_SIZE); \ + __end_bss_decrypted = .; \ + #else #define X86_ALIGN_RODATA_BEGIN @@ -74,6 +91,7 @@ jiffies_64 = jiffies; #define ALIGN_ENTRY_TEXT_BEGIN #define ALIGN_ENTRY_TEXT_END +#define BSS_DECRYPTED #endif @@ -355,6 +373,7 @@ SECTIONS __bss_start = .; *(.bss..page_aligned) *(.bss) + BSS_DECRYPTED . = ALIGN(PAGE_SIZE); __bss_stop = .; } diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 7a8fc26c1115..faca978ebf9d 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -815,10 +815,14 @@ void free_kernel_image_pages(void *begin, void *end) set_memory_np_noalias(begin_ul, len_pages); } +void __weak mem_encrypt_free_decrypted_mem(void) { } + void __ref free_initmem(void) { e820__reallocate_tables(); + mem_encrypt_free_decrypted_mem(); + free_kernel_image_pages(&__init_begin, &__init_end); } diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c index b2de398d1fd3..006f373f54ab 100644 --- a/arch/x86/mm/mem_encrypt.c +++ b/arch/x86/mm/mem_encrypt.c @@ -348,6 +348,30 @@ bool sev_active(void) EXPORT_SYMBOL(sev_active); /* Architecture __weak replacement functions */ +void __init mem_encrypt_free_decrypted_mem(void) +{ + unsigned long vaddr, vaddr_end, npages; + int r; + + vaddr = (unsigned long)__start_bss_decrypted_unused; + vaddr_end = (unsigned long)__end_bss_decrypted; + npages = (vaddr_end - vaddr) >> PAGE_SHIFT; + + /* + * The unused memory range was mapped decrypted, change the encryption + * attribute from decrypted to encrypted before freeing it. + */ + if (mem_encrypt_active()) { + r = set_memory_encrypted(vaddr, npages); + if (r) { + pr_warn("failed to free unused decrypted pages\n"); + return; + } + } + + free_init_pages("unused decrypted", vaddr, vaddr_end); +} + void __init mem_encrypt_init(void) { if (!sme_me_mask) -- cgit v1.2.3-59-g8ed1b From 6a1cac56f41f9ea94e440dfcc1cac44b41a1b194 Mon Sep 17 00:00:00 2001 From: Brijesh Singh Date: Fri, 14 Sep 2018 08:45:59 -0500 Subject: x86/kvm: Use __bss_decrypted attribute in shared variables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The recent removal of the memblock dependency from kvmclock caused a SEV guest regression because the wall_clock and hv_clock_boot variables are no longer mapped decrypted when SEV is active. Use the __bss_decrypted attribute to put the static wall_clock and hv_clock_boot in the .bss..decrypted section so that they are mapped decrypted during boot. In the preparatory stage of CPU hotplug, the per-cpu pvclock data pointer assigns either an element of the static array or dynamically allocated memory for the pvclock data pointer. The static array are now mapped decrypted but the dynamically allocated memory is not mapped decrypted. However, when SEV is active this memory range must be mapped decrypted. Add a function which is called after the page allocator is up, and allocate memory for the pvclock data pointers for the all possible cpus. Map this memory range as decrypted when SEV is active. Fixes: 368a540e0232 ("x86/kvmclock: Remove memblock dependency") Suggested-by: Thomas Gleixner Signed-off-by: Brijesh Singh Signed-off-by: Thomas Gleixner Cc: Tom Lendacky Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Paolo Bonzini Cc: Sean Christopherson Cc: "Radim Krčmář" Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-3-git-send-email-brijesh.singh@amd.com --- arch/x86/kernel/kvmclock.c | 52 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 49 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 1e6764648af3..013fe3d21dbb 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -61,9 +62,10 @@ early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall); (PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info)) static struct pvclock_vsyscall_time_info - hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __aligned(PAGE_SIZE); -static struct pvclock_wall_clock wall_clock; + hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE); +static struct pvclock_wall_clock wall_clock __bss_decrypted; static DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); +static struct pvclock_vsyscall_time_info *hvclock_mem; static inline struct pvclock_vcpu_time_info *this_cpu_pvti(void) { @@ -236,6 +238,45 @@ static void kvm_shutdown(void) native_machine_shutdown(); } +static void __init kvmclock_init_mem(void) +{ + unsigned long ncpus; + unsigned int order; + struct page *p; + int r; + + if (HVC_BOOT_ARRAY_SIZE >= num_possible_cpus()) + return; + + ncpus = num_possible_cpus() - HVC_BOOT_ARRAY_SIZE; + order = get_order(ncpus * sizeof(*hvclock_mem)); + + p = alloc_pages(GFP_KERNEL, order); + if (!p) { + pr_warn("%s: failed to alloc %d pages", __func__, (1U << order)); + return; + } + + hvclock_mem = page_address(p); + + /* + * hvclock is shared between the guest and the hypervisor, must + * be mapped decrypted. + */ + if (sev_active()) { + r = set_memory_decrypted((unsigned long) hvclock_mem, + 1UL << order); + if (r) { + __free_pages(p, order); + hvclock_mem = NULL; + pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n"); + return; + } + } + + memset(hvclock_mem, 0, PAGE_SIZE << order); +} + static int __init kvm_setup_vsyscall_timeinfo(void) { #ifdef CONFIG_X86_64 @@ -250,6 +291,9 @@ static int __init kvm_setup_vsyscall_timeinfo(void) kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK; #endif + + kvmclock_init_mem(); + return 0; } early_initcall(kvm_setup_vsyscall_timeinfo); @@ -269,8 +313,10 @@ static int kvmclock_setup_percpu(unsigned int cpu) /* Use the static page for the first CPUs, allocate otherwise */ if (cpu < HVC_BOOT_ARRAY_SIZE) p = &hv_clock_boot[cpu]; + else if (hvclock_mem) + p = hvclock_mem + cpu - HVC_BOOT_ARRAY_SIZE; else - p = kzalloc(sizeof(*p), GFP_KERNEL); + return -ENOMEM; per_cpu(hv_clock_per_cpu, cpu) = p; return p ? 0 : -ENOMEM; -- cgit v1.2.3-59-g8ed1b From fe18d649891d813964d3aaeebad873f281627fbc Mon Sep 17 00:00:00 2001 From: Li Dongyang Date: Sat, 15 Sep 2018 17:11:25 -0400 Subject: ext4: don't mark mmp buffer head dirty Marking mmp bh dirty before writing it will make writeback pick up mmp block later and submit a write, we don't want the duplicate write as kmmpd thread should have full control of reading and writing the mmp block. Another reason is we will also have random I/O error on the writeback request when blk integrity is enabled, because kmmpd could modify the content of the mmp block(e.g. setting new seq and time) while the mmp block is under I/O requested by writeback. Signed-off-by: Li Dongyang Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@vger.kernel.org --- fs/ext4/mmp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 39b07c2d3384..2305b4374fd3 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -49,7 +49,6 @@ static int write_mmp_block(struct super_block *sb, struct buffer_head *bh) */ sb_start_write(sb); ext4_mmp_csum_set(sb, mmp); - mark_buffer_dirty(bh); lock_buffer(bh); bh->b_end_io = end_buffer_write_sync; get_bh(bh); -- cgit v1.2.3-59-g8ed1b From f6de298806d9cbc63a4907bca34a06162b9d7dce Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 13 Sep 2018 20:01:12 -0700 Subject: hwmon: (nct6775) Fix RPM output for fan7 on NCT6796D fan7 on NCT6796D does not have a fan count register; it only has an RPM register. Switch to using RPM registers to read the fan speed for all chips supporting it to solve the problem for good. Reported-by: Robert Kern Cc: Robert Kern Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 202a2b422461..af4d8792bbb5 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -502,7 +502,7 @@ static const s8 NCT6779_BEEP_BITS[] = { 30, 31 }; /* intrusion0, intrusion1 */ static const u16 NCT6779_REG_FAN[] = { - 0x4b0, 0x4b2, 0x4b4, 0x4b6, 0x4b8, 0x4ba, 0x660 }; + 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x660 }; static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = { 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; @@ -924,6 +924,11 @@ static unsigned int fan_from_reg16(u16 reg, unsigned int divreg) return 1350000U / (reg << divreg); } +static unsigned int fan_from_reg_rpm(u16 reg, unsigned int divreg) +{ + return reg; +} + static u16 fan_to_reg(u32 fan, unsigned int divreg) { if (!fan) @@ -1284,7 +1289,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) case nct6795: case nct6796: return reg == 0x150 || reg == 0x153 || reg == 0x155 || - ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) || + (reg & 0xfff0) == 0x4c0 || reg == 0x402 || reg == 0x63a || reg == 0x63c || reg == 0x63e || reg == 0x640 || reg == 0x642 || reg == 0x64a || @@ -3868,7 +3873,7 @@ static int nct6775_probe(struct platform_device *pdev) data->ALARM_BITS = NCT6779_ALARM_BITS; data->BEEP_BITS = NCT6779_BEEP_BITS; - data->fan_from_reg = fan_from_reg13; + data->fan_from_reg = fan_from_reg_rpm; data->fan_from_reg_min = fan_from_reg13; data->target_temp_mask = 0xff; data->tolerance_mask = 0x07; @@ -3949,7 +3954,7 @@ static int nct6775_probe(struct platform_device *pdev) data->ALARM_BITS = NCT6791_ALARM_BITS; data->BEEP_BITS = NCT6779_BEEP_BITS; - data->fan_from_reg = fan_from_reg13; + data->fan_from_reg = fan_from_reg_rpm; data->fan_from_reg_min = fan_from_reg13; data->target_temp_mask = 0xff; data->tolerance_mask = 0x07; -- cgit v1.2.3-59-g8ed1b From 94dbb63117e82253c9592816aa4465f0a9c94850 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Sat, 15 Sep 2018 21:23:41 -0400 Subject: ext4, dax: add ext4_bmap to ext4_dax_aops Ext4 mount path calls .bmap to the journal inode. This currently works for the DAX mount case because ext4_iget() always set 'ext4_da_aops' to any regular files. In preparation to fix ext4_iget() to set 'ext4_dax_aops' for ext4 DAX files, add ext4_bmap() to 'ext4_dax_aops', since bmap works for DAX inodes. Fixes: 5f0663bb4a64 ("ext4, dax: introduce ext4_dax_aops") Signed-off-by: Toshi Kani Signed-off-by: Theodore Ts'o Suggested-by: Jan Kara Cc: stable@vger.kernel.org --- fs/ext4/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 723058bfe43b..5be07f64ae0a 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3951,6 +3951,7 @@ static const struct address_space_operations ext4_dax_aops = { .writepages = ext4_dax_writepages, .direct_IO = noop_direct_IO, .set_page_dirty = noop_set_page_dirty, + .bmap = ext4_bmap, .invalidatepage = noop_invalidatepage, }; -- cgit v1.2.3-59-g8ed1b From cce6c9f7e6029caee45c459db5b3e78fec6973cb Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Sat, 15 Sep 2018 21:37:59 -0400 Subject: ext4, dax: set ext4_dax_aops for dax files Sync syscall to DAX file needs to flush processor cache, but it currently does not flush to existing DAX files. This is because 'ext4_da_aops' is set to address_space_operations of existing DAX files, instead of 'ext4_dax_aops', since S_DAX flag is set after ext4_set_aops() in the open path. New file -------- lookup_open ext4_create __ext4_new_inode ext4_set_inode_flags // Set S_DAX flag ext4_set_aops // Set aops to ext4_dax_aops Existing file ------------- lookup_open ext4_lookup ext4_iget ext4_set_aops // Set aops to ext4_da_aops ext4_set_inode_flags // Set S_DAX flag Change ext4_iget() to initialize i_flags before ext4_set_aops(). Fixes: 5f0663bb4a64 ("ext4, dax: introduce ext4_dax_aops") Signed-off-by: Toshi Kani Signed-off-by: Theodore Ts'o Suggested-by: Jan Kara Cc: stable@vger.kernel.org --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5be07f64ae0a..f73f18a68165 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4896,6 +4896,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) * not initialized on a new filesystem. */ } ei->i_flags = le32_to_cpu(raw_inode->i_flags); + ext4_set_inode_flags(inode); inode->i_blocks = ext4_inode_blocks(raw_inode, ei); ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); if (ext4_has_feature_64bit(sb)) @@ -5042,7 +5043,6 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino) goto bad_inode; } brelse(iloc.bh); - ext4_set_inode_flags(inode); unlock_new_inode(inode); return inode; -- cgit v1.2.3-59-g8ed1b From edf2ef7242805e53ec2e0841db26e06d8bc7da70 Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Thu, 13 Sep 2018 18:32:21 +0900 Subject: stmmac: fix valid numbers of unicast filter entries Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition. Signed-off-by: Jongsung Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 3609c7b696c7..2b800ce1d5bf 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -67,7 +67,7 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) * Description: * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller - * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter + * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is * selected, and defaults to 1 Unicast address if an unsupported * configuration is selected. @@ -77,8 +77,7 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) int x = ucast_entries; switch (x) { - case 1: - case 32: + case 1 ... 32: case 64: case 128: break; -- cgit v1.2.3-59-g8ed1b From 2b5a921740a55c00223a797d075b9c77c42cb171 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 13 Sep 2018 16:27:20 +0200 Subject: udp4: fix IP_CMSG_CHECKSUM for connected sockets commit 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") left out the early demux path for connected sockets. As a result IP_CMSG_CHECKSUM gives wrong values for such socket when GRO is not enabled/available. This change addresses the issue by moving the csum conversion to a common helper and using such helper in both the default and the early demux rx path. Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv4/udp.c | 49 ++++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 23 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index f4e35b2ff8b8..7d69dd6fa7e8 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2124,6 +2124,28 @@ static inline int udp4_csum_init(struct sk_buff *skb, struct udphdr *uh, inet_compute_pseudo); } +/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and + * return code conversion for ip layer consumption + */ +static int udp_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb, + struct udphdr *uh) +{ + int ret; + + if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk)) + skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check, + inet_compute_pseudo); + + ret = udp_queue_rcv_skb(sk, skb); + + /* a return value > 0 means to resubmit the input, but + * it wants the return to be -protocol, or 0 + */ + if (ret > 0) + return -ret; + return 0; +} + /* * All we need to do is get the socket, and then do a checksum. */ @@ -2170,14 +2192,9 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, if (unlikely(sk->sk_rx_dst != dst)) udp_sk_rx_dst_set(sk, dst); - ret = udp_queue_rcv_skb(sk, skb); + ret = udp_unicast_rcv_skb(sk, skb, uh); sock_put(sk); - /* a return value > 0 means to resubmit the input, but - * it wants the return to be -protocol, or 0 - */ - if (ret > 0) - return -ret; - return 0; + return ret; } if (rt->rt_flags & (RTCF_BROADCAST|RTCF_MULTICAST)) @@ -2185,22 +2202,8 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, saddr, daddr, udptable, proto); sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable); - if (sk) { - int ret; - - if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk)) - skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check, - inet_compute_pseudo); - - ret = udp_queue_rcv_skb(sk, skb); - - /* a return value > 0 means to resubmit the input, but - * it wants the return to be -protocol, or 0 - */ - if (ret > 0) - return -ret; - return 0; - } + if (sk) + return udp_unicast_rcv_skb(sk, skb, uh); if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) goto drop; -- cgit v1.2.3-59-g8ed1b From eb63f2964dbe36f26deac77d3016791675821ded Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Thu, 13 Sep 2018 16:27:21 +0200 Subject: udp6: add missing checks on edumux packet processing Currently the UDPv6 early demux rx code path lacks some mandatory checks, already implemented into the normal RX code path - namely the checksum conversion and no_check6_rx check. Similar to the previous commit, we move the common processing to an UDPv6 specific helper and call it from both edemux code path and normal code path. In respect to the UDPv4, we need to add an explicit check for non zero csum according to no_check6_rx value. Reported-by: Jianlin Shi Suggested-by: Xin Long Fixes: c9f2c1ae123a ("udp6: fix socket leak on early demux") Fixes: 2abb7cdc0dc8 ("udp: Add support for doing checksum unnecessary conversion") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv6/udp.c | 65 +++++++++++++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 28 deletions(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 83f4c77c79d8..28c4aa5078fc 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -752,6 +752,28 @@ static void udp6_sk_rx_dst_set(struct sock *sk, struct dst_entry *dst) } } +/* wrapper for udp_queue_rcv_skb tacking care of csum conversion and + * return code conversion for ip layer consumption + */ +static int udp6_unicast_rcv_skb(struct sock *sk, struct sk_buff *skb, + struct udphdr *uh) +{ + int ret; + + if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk)) + skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check, + ip6_compute_pseudo); + + ret = udpv6_queue_rcv_skb(sk, skb); + + /* a return value > 0 means to resubmit the input, but + * it wants the return to be -protocol, or 0 + */ + if (ret > 0) + return -ret; + return 0; +} + int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, int proto) { @@ -803,13 +825,14 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, if (unlikely(sk->sk_rx_dst != dst)) udp6_sk_rx_dst_set(sk, dst); - ret = udpv6_queue_rcv_skb(sk, skb); - sock_put(sk); + if (!uh->check && !udp_sk(sk)->no_check6_rx) { + sock_put(sk); + goto report_csum_error; + } - /* a return value > 0 means to resubmit the input */ - if (ret > 0) - return ret; - return 0; + ret = udp6_unicast_rcv_skb(sk, skb, uh); + sock_put(sk); + return ret; } /* @@ -822,30 +845,13 @@ int __udp6_lib_rcv(struct sk_buff *skb, struct udp_table *udptable, /* Unicast */ sk = __udp6_lib_lookup_skb(skb, uh->source, uh->dest, udptable); if (sk) { - int ret; - - if (!uh->check && !udp_sk(sk)->no_check6_rx) { - udp6_csum_zero_error(skb); - goto csum_error; - } - - if (inet_get_convert_csum(sk) && uh->check && !IS_UDPLITE(sk)) - skb_checksum_try_convert(skb, IPPROTO_UDP, uh->check, - ip6_compute_pseudo); - - ret = udpv6_queue_rcv_skb(sk, skb); - - /* a return value > 0 means to resubmit the input */ - if (ret > 0) - return ret; - - return 0; + if (!uh->check && !udp_sk(sk)->no_check6_rx) + goto report_csum_error; + return udp6_unicast_rcv_skb(sk, skb, uh); } - if (!uh->check) { - udp6_csum_zero_error(skb); - goto csum_error; - } + if (!uh->check) + goto report_csum_error; if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) goto discard; @@ -866,6 +872,9 @@ short_packet: ulen, skb->len, daddr, ntohs(uh->dest)); goto discard; + +report_csum_error: + udp6_csum_zero_error(skb); csum_error: __UDP6_INC_STATS(net, UDP_MIB_CSUMERRORS, proto == IPPROTO_UDPLITE); discard: -- cgit v1.2.3-59-g8ed1b From 4bf9ffa0fb5744ed40d7348c24fa9ae398b1d603 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 14 Sep 2018 13:33:44 +0900 Subject: veth: Orphan skb before GRO GRO expects skbs not to be owned by sockets, but when XDP is enabled veth passed skbs owned by sockets. It caused corrupted sk_wmem_alloc. Paolo Abeni reported the following splat: [ 362.098904] refcount_t overflow at skb_set_owner_w+0x5e/0xa0 in iperf3[1644], uid/euid: 0/0 [ 362.108239] WARNING: CPU: 0 PID: 1644 at kernel/panic.c:648 refcount_error_report+0xa0/0xa4 [ 362.117547] Modules linked in: tcp_diag inet_diag veth intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore intel_rapl_perf ipmi_ssif iTCO_wdt sg ipmi_si iTCO_vendor_support ipmi_devintf mxm_wmi ipmi_msghandler pcspkr dcdbas mei_me wmi mei lpc_ich acpi_power_meter pcc_cpufreq xfs libcrc32c sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ixgbe igb ttm ahci mdio libahci ptp crc32c_intel drm pps_core libata i2c_algo_bit dca dm_mirror dm_region_hash dm_log dm_mod [ 362.176622] CPU: 0 PID: 1644 Comm: iperf3 Not tainted 4.19.0-rc2.vanilla+ #2025 [ 362.184777] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 [ 362.193124] RIP: 0010:refcount_error_report+0xa0/0xa4 [ 362.198758] Code: 08 00 00 48 8b 95 80 00 00 00 49 8d 8c 24 80 0a 00 00 41 89 c1 44 89 2c 24 48 89 de 48 c7 c7 18 4d e7 9d 31 c0 e8 30 fa ff ff <0f> 0b eb 88 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 49 89 fc [ 362.219711] RSP: 0018:ffff9ee6ff603c20 EFLAGS: 00010282 [ 362.225538] RAX: 0000000000000000 RBX: ffffffff9de83e10 RCX: 0000000000000000 [ 362.233497] RDX: 0000000000000001 RSI: ffff9ee6ff6167d8 RDI: ffff9ee6ff6167d8 [ 362.241457] RBP: ffff9ee6ff603d78 R08: 0000000000000490 R09: 0000000000000004 [ 362.249416] R10: 0000000000000000 R11: ffff9ee6ff603990 R12: ffff9ee664b94500 [ 362.257377] R13: 0000000000000000 R14: 0000000000000004 R15: ffffffff9de615f9 [ 362.265337] FS: 00007f1d22d28740(0000) GS:ffff9ee6ff600000(0000) knlGS:0000000000000000 [ 362.274363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 362.280773] CR2: 00007f1d222f35d0 CR3: 0000001fddfec003 CR4: 00000000001606f0 [ 362.288733] Call Trace: [ 362.291459] [ 362.293702] ex_handler_refcount+0x4e/0x80 [ 362.298269] fixup_exception+0x35/0x40 [ 362.302451] do_trap+0x109/0x150 [ 362.306048] do_error_trap+0xd5/0x130 [ 362.315766] invalid_op+0x14/0x20 [ 362.319460] RIP: 0010:skb_set_owner_w+0x5e/0xa0 [ 362.324512] Code: ef ff ff 74 49 48 c7 43 60 20 7b 4a 9d 8b 85 f4 01 00 00 85 c0 75 16 8b 83 e0 00 00 00 f0 01 85 44 01 00 00 0f 88 d8 23 16 00 <5b> 5d c3 80 8b 91 00 00 00 01 8b 85 f4 01 00 00 89 83 a4 00 00 00 [ 362.345465] RSP: 0018:ffff9ee6ff603e20 EFLAGS: 00010a86 [ 362.351291] RAX: 0000000000001100 RBX: ffff9ee65deec700 RCX: ffff9ee65e829244 [ 362.359250] RDX: 0000000000000100 RSI: ffff9ee65e829100 RDI: ffff9ee65deec700 [ 362.367210] RBP: ffff9ee65e829100 R08: 000000000002a380 R09: 0000000000000000 [ 362.375169] R10: 0000000000000002 R11: fffff1a4bf77bb00 R12: ffffc0754661d000 [ 362.383130] R13: ffff9ee65deec200 R14: ffff9ee65f597000 R15: 00000000000000aa [ 362.391092] veth_xdp_rcv+0x4e4/0x890 [veth] [ 362.399357] veth_poll+0x4d/0x17a [veth] [ 362.403731] net_rx_action+0x2af/0x3f0 [ 362.407912] __do_softirq+0xdd/0x29e [ 362.411897] do_softirq_own_stack+0x2a/0x40 [ 362.416561] [ 362.418899] do_softirq+0x4b/0x70 [ 362.422594] __local_bh_enable_ip+0x50/0x60 [ 362.427258] ip_finish_output2+0x16a/0x390 [ 362.431824] ip_output+0x71/0xe0 [ 362.440670] __tcp_transmit_skb+0x583/0xab0 [ 362.445333] tcp_write_xmit+0x247/0xfb0 [ 362.449609] __tcp_push_pending_frames+0x2d/0xd0 [ 362.454760] tcp_sendmsg_locked+0x857/0xd30 [ 362.459424] tcp_sendmsg+0x27/0x40 [ 362.463216] sock_sendmsg+0x36/0x50 [ 362.467104] sock_write_iter+0x87/0x100 [ 362.471382] __vfs_write+0x112/0x1a0 [ 362.475369] vfs_write+0xad/0x1a0 [ 362.479062] ksys_write+0x52/0xc0 [ 362.482759] do_syscall_64+0x5b/0x180 [ 362.486841] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 362.492473] RIP: 0033:0x7f1d22293238 [ 362.496458] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 c5 54 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 362.517409] RSP: 002b:00007ffebaef8008 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 362.525855] RAX: ffffffffffffffda RBX: 0000000000002800 RCX: 00007f1d22293238 [ 362.533816] RDX: 0000000000002800 RSI: 00007f1d22d36000 RDI: 0000000000000005 [ 362.541775] RBP: 00007f1d22d36000 R08: 00000002db777a30 R09: 0000562b70712b20 [ 362.549734] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000005 [ 362.557693] R13: 0000000000002800 R14: 00007ffebaef8060 R15: 0000562b70712260 In order to avoid this, orphan the skb before entering GRO. Fixes: 948d4f214fde ("veth: Add driver XDP") Reported-by: Paolo Abeni Signed-off-by: Toshiaki Makita Tested-by: Paolo Abeni Signed-off-by: David S. Miller --- drivers/net/veth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index 8d679c8b7f25..41a00cd76955 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -463,6 +463,8 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq, struct sk_buff *skb, int mac_len, delta, off; struct xdp_buff xdp; + skb_orphan(skb); + rcu_read_lock(); xdp_prog = rcu_dereference(rq->xdp_prog); if (unlikely(!xdp_prog)) { @@ -508,8 +510,6 @@ static struct sk_buff *veth_xdp_rcv_skb(struct veth_rq *rq, struct sk_buff *skb, skb_copy_header(nskb, skb); head_off = skb_headroom(nskb) - skb_headroom(skb); skb_headers_offset_update(nskb, head_off); - if (skb->sk) - skb_set_owner_w(nskb, skb->sk); consume_skb(skb); skb = nskb; } -- cgit v1.2.3-59-g8ed1b From f14040bca89258b8a1c71e2112e430462172ce93 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 13 Sep 2018 15:33:47 +1000 Subject: KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds When we come into the softpatch handler (0x1500), we use r11 to store the HSRR0 for later use by the denorm handler. We also use the softpatch handler for the TM workarounds for POWER9. Unfortunately, in kvmppc_interrupt_hv we later store r11 out to the vcpu assuming it's still what we got from userspace. This causes r11 to be corrupted in the VCPU and hence when we restore the guest, we get a corrupted r11. We've seen this when running TM tests inside guests on P9. This fixes the problem by only touching r11 in the denorm case. Fixes: 4bb3c7a020 ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9") Cc: # 4.17+ Test-by: Suraj Jitindar Singh Reviewed-by: Paul Mackerras Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/exceptions-64s.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index ea04dfb8c092..2d8fc8c9da7a 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1314,9 +1314,7 @@ EXC_REAL_BEGIN(denorm_exception_hv, 0x1500, 0x100) #ifdef CONFIG_PPC_DENORMALISATION mfspr r10,SPRN_HSRR1 - mfspr r11,SPRN_HSRR0 /* save HSRR0 */ andis. r10,r10,(HSRR1_DENORM)@h /* denorm? */ - addi r11,r11,-4 /* HSRR0 is next instruction */ bne+ denorm_assist #endif @@ -1382,6 +1380,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) */ XVCPSGNDP32(32) denorm_done: + mfspr r11,SPRN_HSRR0 + subi r11,r11,4 mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) -- cgit v1.2.3-59-g8ed1b From d792d4c4fc866ae224b0b0ca2aabd87d23b4d6cc Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Tue, 11 Sep 2018 12:22:25 -0700 Subject: scsi: ibmvscsis: Fix a stringop-overflow warning There's currently a warning about string overflow with strncat: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified bound 64 equals destination size [-Werror=stringop-overflow=] strncat(vscsi->eye, vdev->name, MAX_EYE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Switch to a single snprintf instead of a strcpy + strcat to handle this cleanly. Signed-off-by: Laura Abbott Suggested-by: Kees Cook Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index fac377320158..b3a029ad07cd 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -3474,8 +3474,7 @@ static int ibmvscsis_probe(struct vio_dev *vdev, vscsi->dds.window[LOCAL].liobn, vscsi->dds.window[REMOTE].liobn); - strcpy(vscsi->eye, "VSCSI "); - strncat(vscsi->eye, vdev->name, MAX_EYE); + snprintf(vscsi->eye, sizeof(vscsi->eye), "VSCSI %s", vdev->name); vscsi->dds.unit_id = vdev->unit_address; strncpy(vscsi->dds.partition_name, partition_name, -- cgit v1.2.3-59-g8ed1b From adad633af7b970bfa5dd1b624a4afc83cac9b235 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Tue, 11 Sep 2018 12:22:26 -0700 Subject: scsi: ibmvscsis: Ensure partition name is properly NUL terminated While reviewing another part of the code, Kees noticed that the strncpy of the partition name might not always be NUL terminated. Switch to using strscpy which does this safely. Reported-by: Kees Cook Signed-off-by: Laura Abbott Reviewed-by: Kees Cook Signed-off-by: Martin K. Petersen --- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c index b3a029ad07cd..f42a619198c4 100644 --- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c @@ -3477,7 +3477,7 @@ static int ibmvscsis_probe(struct vio_dev *vdev, snprintf(vscsi->eye, sizeof(vscsi->eye), "VSCSI %s", vdev->name); vscsi->dds.unit_id = vdev->unit_address; - strncpy(vscsi->dds.partition_name, partition_name, + strscpy(vscsi->dds.partition_name, partition_name, sizeof(vscsi->dds.partition_name)); vscsi->dds.partition_num = partition_number; -- cgit v1.2.3-59-g8ed1b From 83e32a5910772e1475d3640a429b7686695f04d1 Mon Sep 17 00:00:00 2001 From: Xuewei Zhang Date: Thu, 6 Sep 2018 13:37:19 -0700 Subject: scsi: sd: Contribute to randomness when running rotational device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently a scsi device won't contribute to kernel randomness when it uses blk-mq. Since we commonly use scsi on rotational device with blk-mq, it make sense to keep contributing to kernel randomness in these cases. This is especially important for virtual machines. commit b5b6e8c8d3b4 ("scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity") made all virtio-scsi device to use blk-mq, which does not contribute to randomness today. So for a virtual machine only having virtio-scsi disk (which is common), it will simple stop getting randomness from its disks in today's implementation. With this patch, if the above VM has rotational virtio-scsi device, then it can still benefit from the entropy generated from the disk. Reported-by: Xuewei Zhang Signed-off-by: Xuewei Zhang Reviewed-by: Ming Lei Reviewed-by: Maciej Żenczykowski Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b79b366a94f7..5e4f10d28065 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2959,6 +2959,9 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp) if (rot == 1) { blk_queue_flag_set(QUEUE_FLAG_NONROT, q); blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, q); + } else { + blk_queue_flag_clear(QUEUE_FLAG_NONROT, q); + blk_queue_flag_set(QUEUE_FLAG_ADD_RANDOM, q); } if (sdkp->device->type == TYPE_ZBC) { -- cgit v1.2.3-59-g8ed1b From b1fbebd4164b3d170ad916dcd692cf843c9c065d Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 17 Sep 2018 17:25:24 +0900 Subject: ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path After allocating model-dependent data for M-Audio FW1814 and ProjectMix I/O, ALSA bebob driver has memory leak at error path. This commit releases the allocated data at the error path. Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/bebob/bebob.c | 2 ++ sound/firewire/bebob/bebob_maudio.c | 4 ---- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c index 730ea91d9be8..93676354f87f 100644 --- a/sound/firewire/bebob/bebob.c +++ b/sound/firewire/bebob/bebob.c @@ -263,6 +263,8 @@ do_registration(struct work_struct *work) error: mutex_unlock(&devices_mutex); snd_bebob_stream_destroy_duplex(bebob); + kfree(bebob->maudio_special_quirk); + bebob->maudio_special_quirk = NULL; snd_card_free(bebob->card); dev_info(&bebob->unit->device, "Sound card registration failed: %d\n", err); diff --git a/sound/firewire/bebob/bebob_maudio.c b/sound/firewire/bebob/bebob_maudio.c index 0c5a4cbb99ba..c266997ad299 100644 --- a/sound/firewire/bebob/bebob_maudio.c +++ b/sound/firewire/bebob/bebob_maudio.c @@ -294,10 +294,6 @@ snd_bebob_maudio_special_discover(struct snd_bebob *bebob, bool is1814) bebob->midi_output_ports = 2; } end: - if (err < 0) { - kfree(params); - bebob->maudio_special_quirk = NULL; - } mutex_unlock(&bebob->mutex); return err; } -- cgit v1.2.3-59-g8ed1b From ce925f088b979537f22f9e05eb923ef9822ca139 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 17 Sep 2018 17:26:08 +0900 Subject: ALSA: oxfw: fix memory leak for model-dependent data at error path After allocating model-dependent data, ALSA OXFW driver has memory leak of the data at error path. This commit releases the data at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/oxfw/oxfw.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index fd34ef2ac679..75c6ba2fe3dc 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -271,6 +271,8 @@ error: if (oxfw->has_output) snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream); snd_card_free(oxfw->card); + kfree(oxfw->spec); + oxfw->spec = NULL; dev_info(&oxfw->unit->device, "Sound card registration failed: %d\n", err); } -- cgit v1.2.3-59-g8ed1b From 1064bc685d359f549f91c2d5f111965a9284f328 Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 17 Sep 2018 17:26:20 +0900 Subject: ALSA: oxfw: fix memory leak of discovered stream formats at error path After finishing discover of stream formats, ALSA OXFW driver has memory leak of allocated memory object at error path. This commit releases the memory object at the error path. Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/oxfw/oxfw.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c index 75c6ba2fe3dc..2ea8be6c8584 100644 --- a/sound/firewire/oxfw/oxfw.c +++ b/sound/firewire/oxfw/oxfw.c @@ -208,6 +208,7 @@ static int detect_quirks(struct snd_oxfw *oxfw) static void do_registration(struct work_struct *work) { struct snd_oxfw *oxfw = container_of(work, struct snd_oxfw, dwork.work); + int i; int err; if (oxfw->registered) @@ -270,6 +271,12 @@ error: snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->rx_stream); if (oxfw->has_output) snd_oxfw_stream_destroy_simplex(oxfw, &oxfw->tx_stream); + for (i = 0; i < SND_OXFW_STREAM_FORMAT_ENTRIES; ++i) { + kfree(oxfw->tx_stream_formats[i]); + oxfw->tx_stream_formats[i] = NULL; + kfree(oxfw->rx_stream_formats[i]); + oxfw->rx_stream_formats[i] = NULL; + } snd_card_free(oxfw->card); kfree(oxfw->spec); oxfw->spec = NULL; -- cgit v1.2.3-59-g8ed1b From c3b55e2ec9c76e7a0de2a0b1dc851fdc9440385b Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Mon, 17 Sep 2018 17:26:41 +0900 Subject: ALSA: fireworks: fix memory leak of response buffer at error path After allocating memory object for response buffer, ALSA fireworks driver has leak of the memory object at error path. This commit releases the object at the error path. Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card') Cc: # v4.7+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai --- sound/firewire/fireworks/fireworks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/firewire/fireworks/fireworks.c b/sound/firewire/fireworks/fireworks.c index 71a0613d3da0..f2d073365cf6 100644 --- a/sound/firewire/fireworks/fireworks.c +++ b/sound/firewire/fireworks/fireworks.c @@ -301,6 +301,8 @@ error: snd_efw_transaction_remove_instance(efw); snd_efw_stream_destroy_duplex(efw); snd_card_free(efw->card); + kfree(efw->resp_buf); + efw->resp_buf = NULL; dev_info(&efw->unit->device, "Sound card registration failed: %d\n", err); } -- cgit v1.2.3-59-g8ed1b From 55066354285b36ee09dc50e2527f43a97c567177 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 17 Sep 2018 05:23:58 -0700 Subject: hwmon: (nct6775) Use different register to get fan RPM for fan7 The documented register to retrieve the fan RPM for fan7 is found to be unreliable at least with NCT6796D revision 3. Let's use register 0x4ce instead. This is undocumented for NCT6796D, but documented for NCT6797D and NCT6798D and known to be working. Reported-by: Robert Kern Cc: Robert Kern Fixes: 81820059a428 ("hwmon: (nct6775) Add support for NCT6796D") Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index af4d8792bbb5..78603b78cf41 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -502,7 +502,7 @@ static const s8 NCT6779_BEEP_BITS[] = { 30, 31 }; /* intrusion0, intrusion1 */ static const u16 NCT6779_REG_FAN[] = { - 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x660 }; + 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x4ce }; static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = { 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; @@ -1293,7 +1293,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) reg == 0x402 || reg == 0x63a || reg == 0x63c || reg == 0x63e || reg == 0x640 || reg == 0x642 || reg == 0x64a || - reg == 0x64c || reg == 0x660 || + reg == 0x64c || reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 || reg == 0x7b || reg == 0x7d; } -- cgit v1.2.3-59-g8ed1b From be1277f5eb17a2e5788139eabb0b53dd04c695f3 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Mon, 16 Jul 2018 12:58:33 +0200 Subject: nvme: count all ANA groups for ANA Log page When issuing a short read on the ANA log page the number of groups should not change, even though the final returned data might contain less groups than that number. Signed-off-by: Hannes Reinecke [switched to a for loop] Signed-off-by: Christoph Hellwig --- drivers/nvme/target/admin-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c index a21caea1e080..2008fa62a373 100644 --- a/drivers/nvme/target/admin-cmd.c +++ b/drivers/nvme/target/admin-cmd.c @@ -245,6 +245,10 @@ static void nvmet_execute_get_log_page_ana(struct nvmet_req *req) offset += len; ngrps++; } + for ( ; grpid <= NVMET_MAX_ANAGRPS; grpid++) { + if (nvmet_ana_group_enabled[grpid]) + ngrps++; + } hdr.chgcnt = cpu_to_le64(nvmet_ana_chgcnt); hdr.ngrps = cpu_to_le16(ngrps); -- cgit v1.2.3-59-g8ed1b From 85516a9881a31e2c7a8d10f4697f3adcccc7cef1 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Fri, 7 Sep 2018 16:35:54 +0200 Subject: mtd: partitions: fix unbalanced of_node_get/put() While at first mtd_part_of_parse() would just call of_get_chil_by_name(), it has been patched to deal with sub-partitions and will now directly manipulate the node returned by mtd_get_of_node() if the MTD device is a partition. A of_node_put() was a bit below in the code, to balance the of_get_child_by_name(). However, despite its name, mtd_get_of_node() does not take a reference on the OF node. It is a simple helper hiding some pointer logic to retrieve the OF node related to an MTD device. The direct effect of such unbalanced reference counting is visible by rmmod'ing any module that would have added MTD partitions: OF: ERROR: Bad of_node_put() on As it seems normal to get a reference on the OF node during the of_property_for_each_string() that follows, add a call to of_node_get() when relevant. Fixes: 76a832254ab0 ("mtd: partitions: use DT info for parsing partitions with "compatible" prop") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/mtdpart.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 52e2cb35fc79..99c460facd5e 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -873,8 +873,11 @@ static int mtd_part_of_parse(struct mtd_info *master, int ret, err = 0; np = mtd_get_of_node(master); - if (!mtd_is_partition(master)) + if (mtd_is_partition(master)) + of_node_get(np); + else np = of_get_child_by_name(np, "partitions"); + of_property_for_each_string(np, "compatible", prop, compat) { parser = mtd_part_get_compatible_parser(compat); if (!parser) -- cgit v1.2.3-59-g8ed1b From f025571e96caa95ffc3c1792f762a584893de582 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 14 Sep 2018 11:20:07 +0000 Subject: net: ethernet: ti: add missing GENERIC_ALLOCATOR dependency This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR. without that, the following sparc64 build failure happen drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc': (.text+0x278): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit': (.text+0x340): undefined reference to `gen_pool_alloc' (.text+0x5c4): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free': davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6': davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail' davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size' davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail' drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create': (.text+0x19f8): undefined reference to `devm_gen_pool_create' (.text+0x1a90): undefined reference to `gen_pool_add_virt' Makefile:1011: recipe for target 'vmlinux' failed Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 9263d638bd6d..f932923f7d56 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -41,6 +41,7 @@ config TI_DAVINCI_MDIO config TI_DAVINCI_CPDMA tristate "TI DaVinci CPDMA Support" depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_ALLOCATOR ---help--- This driver supports TI's DaVinci CPDMA dma engine. -- cgit v1.2.3-59-g8ed1b From 8540827ebac6b654ab2f69c8fbce9e4fbd6304a0 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Fri, 14 Sep 2018 16:28:05 +0200 Subject: pppoe: fix reception of frames with no mac header pppoe_rcv() needs to look back at the Ethernet header in order to lookup the PPPoE session. Therefore we need to ensure that the mac header is big enough to contain an Ethernet header. Otherwise eth_hdr(skb)->h_source might access invalid data. ================================================================== BUG: KMSAN: uninit-value in __get_item drivers/net/ppp/pppoe.c:172 [inline] BUG: KMSAN: uninit-value in get_item drivers/net/ppp/pppoe.c:236 [inline] BUG: KMSAN: uninit-value in pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 CPU: 0 PID: 4543 Comm: syz-executor355 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 __get_item drivers/net/ppp/pppoe.c:172 [inline] get_item drivers/net/ppp/pppoe.c:236 [inline] pppoe_rcv+0xcef/0x10e0 drivers/net/ppp/pppoe.c:450 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4447c9 RSP: 002b:00007fff64c8fc28 EFLAGS: 00000297 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004447c9 RDX: 000000000000fd87 RSI: 0000000020000600 RDI: 0000000000000004 RBP: 00000000006cf018 R08: 00007fff64c8fda8 R09: 00007fff00006bda R10: 0000000000005fe7 R11: 0000000000000297 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 tun_alloc_skb drivers/net/tun.c:1532 [inline] tun_get_user+0x2242/0x7c60 drivers/net/tun.c:1829 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ================================================================== Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers") Reported-by: syzbot+f5f6080811c849739212@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index ce61231e96ea..62dc564b251d 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -429,6 +429,9 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, if (!skb) goto out; + if (skb_mac_header_len(skb) < ETH_HLEN) + goto drop; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) goto drop; -- cgit v1.2.3-59-g8ed1b From 41948ccb4a856dddacfbd4d789d4fa8663fe41bb Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 14 Sep 2018 16:56:35 +0200 Subject: net: mvpp2: let phylink manage the carrier state Net drivers using phylink shouldn't mess with the link carrier themselves and should let phylink manage it. The mvpp2 driver wasn't following this best practice as the mac_config() function made calls to change the link carrier state. This led to wrongly reported carrier link state which then triggered other issues. This patch fixes this behaviour. But the PPv2 driver relied on this misbehaviour in two cases: for fixed links and when not using phylink (ACPI mode). The later was fixed by adding an explicit call to link_up(), which when the ACPI mode will use phylink should be removed. The fixed link case was relying on the mac_config() function to set the link up, as we found an issue in phylink_start() which assumes the carrier is off. If not, the link_up() function is never called. To fix this, a call to netif_carrier_off() is added just before phylink_start() so that we do not introduce a regression in the driver. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Russell King Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 28500417843e..702fec82d806 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -58,6 +58,8 @@ static struct { */ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, const struct phylink_link_state *state); +static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode, + phy_interface_t interface, struct phy_device *phy); /* Queue modes */ #define MVPP2_QDIST_SINGLE_MODE 0 @@ -3142,6 +3144,7 @@ static void mvpp2_start_dev(struct mvpp2_port *port) mvpp22_mode_reconfigure(port); if (port->phylink) { + netif_carrier_off(port->dev); phylink_start(port->phylink); } else { /* Phylink isn't used as of now for ACPI, so the MAC has to be @@ -3150,9 +3153,10 @@ static void mvpp2_start_dev(struct mvpp2_port *port) */ struct phylink_link_state state = { .interface = port->phy_interface, - .link = 1, }; mvpp2_mac_config(port->dev, MLO_AN_INBAND, &state); + mvpp2_mac_link_up(port->dev, MLO_AN_INBAND, port->phy_interface, + NULL); } netif_tx_start_all_queues(port->dev); @@ -4495,10 +4499,6 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, return; } - netif_tx_stop_all_queues(port->dev); - if (!port->has_phy) - netif_carrier_off(port->dev); - /* Make sure the port is disabled when reconfiguring the mode */ mvpp2_port_disable(port); @@ -4523,16 +4523,7 @@ static void mvpp2_mac_config(struct net_device *dev, unsigned int mode, if (port->priv->hw_version == MVPP21 && port->flags & MVPP2_F_LOOPBACK) mvpp2_port_loopback_set(port, state); - /* If the port already was up, make sure it's still in the same state */ - if (state->link || !port->has_phy) { - mvpp2_port_enable(port); - - mvpp2_egress_enable(port); - mvpp2_ingress_enable(port); - if (!port->has_phy) - netif_carrier_on(dev); - netif_tx_wake_all_queues(dev); - } + mvpp2_port_enable(port); } static void mvpp2_mac_link_up(struct net_device *dev, unsigned int mode, -- cgit v1.2.3-59-g8ed1b From eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 14 Sep 2018 17:48:10 +0200 Subject: net: macb: disable scatter-gather for macb on sama5d3 Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 16e4ef7d7185..f1a86b422617 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -3837,6 +3837,13 @@ static const struct macb_config at91sam9260_config = { .init = macb_init, }; +static const struct macb_config sama5d3macb_config = { + .caps = MACB_CAPS_SG_DISABLED + | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct macb_config pc302gem_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, @@ -3904,6 +3911,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,gem", .data = &pc302gem_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, + { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config }, { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config }, -- cgit v1.2.3-59-g8ed1b From 321cc359d899a8e988f3725d87c18a628e1cc624 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 14 Sep 2018 17:48:11 +0200 Subject: ARM: dts: at91: add new compatibility string for macb on sama5d3 We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/macb.txt | 1 + arch/arm/boot/dts/sama5d3_emac.dtsi | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 457d5ae16f23..3e17ac1d5d58 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -10,6 +10,7 @@ Required properties: Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. + Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC. diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ }; macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; -- cgit v1.2.3-59-g8ed1b From a7f38002fb69b44f8fc622ecb838665d0b8666af Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 14 Sep 2018 17:39:53 +0100 Subject: net: hp100: fix always-true check for link up state The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value that is always non-zero and hence the wait for the link to drop always terminates prematurely. Fix this by using a logical not operator instead of a bitwise complement. This issue has been in the driver since pre-2.6.12-rc2. Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/hp/hp100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index c8c7ad2eff77..9b5a68b65432 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -2634,7 +2634,7 @@ static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) /* Wait for link to drop */ time = jiffies + (HZ / 10); do { - if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) + if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) break; if (!in_interrupt()) schedule_timeout_interruptible(1); -- cgit v1.2.3-59-g8ed1b From bbd6528d28c1b8e80832b3b018ec402b6f5c3215 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 14 Sep 2018 12:02:31 -0700 Subject: ipv6: fix possible use-after-free in ip6_xmit() In the unlikely case ip6_xmit() has to call skb_realloc_headroom(), we need to call skb_set_owner_w() before consuming original skb, otherwise we risk a use-after-free. Bring IPv6 in line with what we do in IPv4 to fix this. Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 16f200f06500..f9f8f554d141 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -219,12 +219,10 @@ int ip6_xmit(const struct sock *sk, struct sk_buff *skb, struct flowi6 *fl6, kfree_skb(skb); return -ENOBUFS; } + if (skb->sk) + skb_set_owner_w(skb2, skb->sk); consume_skb(skb); skb = skb2; - /* skb_set_owner_w() changes sk->sk_wmem_alloc atomically, - * it is safe to call in our context (socket lock not held) - */ - skb_set_owner_w(skb, (struct sock *)sk); } if (opt->opt_flen) ipv6_push_frag_opts(skb, opt, &proto); -- cgit v1.2.3-59-g8ed1b From 28ea334bd1657f3c43485b4a8592672fc6835fac Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Sep 2018 15:41:29 -0400 Subject: bnxt_en: Fix VF mac address regression. The recent commit to always forward the VF MAC address to the PF for approval may not work if the PF driver or the firmware is older. This will cause the VF driver to fail during probe: bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF bnxt_en 0000:00:03.0: Unable to initialize mac address. bnxt_en: probe of 0000:00:03.0 failed with error -99 We fix it by treating the error as fatal only if the VF MAC address is locally generated by the VF. Fixes: 707e7e966026 ("bnxt_en: Always forward VF MAC address to the PF.") Reported-by: Seth Forshee Reported-by: Siwei Liu Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++++-- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 9 +++++---- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h | 2 +- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index cecbb1d1f587..177587f9c3f1 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8027,7 +8027,7 @@ static int bnxt_change_mac_addr(struct net_device *dev, void *p) if (ether_addr_equal(addr->sa_data, dev->dev_addr)) return 0; - rc = bnxt_approve_mac(bp, addr->sa_data); + rc = bnxt_approve_mac(bp, addr->sa_data, true); if (rc) return rc; @@ -8827,14 +8827,19 @@ static int bnxt_init_mac_addr(struct bnxt *bp) } else { #ifdef CONFIG_BNXT_SRIOV struct bnxt_vf_info *vf = &bp->vf; + bool strict_approval = true; if (is_valid_ether_addr(vf->mac_addr)) { /* overwrite netdev dev_addr with admin VF MAC */ memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN); + /* Older PF driver or firmware may not approve this + * correctly. + */ + strict_approval = false; } else { eth_hw_addr_random(bp->dev); } - rc = bnxt_approve_mac(bp, bp->dev->dev_addr); + rc = bnxt_approve_mac(bp, bp->dev->dev_addr, strict_approval); #endif } return rc; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index fcd085a9853a..3962f6fd543c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -1104,7 +1104,7 @@ update_vf_mac_exit: mutex_unlock(&bp->hwrm_cmd_lock); } -int bnxt_approve_mac(struct bnxt *bp, u8 *mac) +int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict) { struct hwrm_func_vf_cfg_input req = {0}; int rc = 0; @@ -1122,12 +1122,13 @@ int bnxt_approve_mac(struct bnxt *bp, u8 *mac) memcpy(req.dflt_mac_addr, mac, ETH_ALEN); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); mac_done: - if (rc) { + if (rc && strict) { rc = -EADDRNOTAVAIL; netdev_warn(bp->dev, "VF MAC address %pM not approved by the PF\n", mac); + return rc; } - return rc; + return 0; } #else @@ -1144,7 +1145,7 @@ void bnxt_update_vf_mac(struct bnxt *bp) { } -int bnxt_approve_mac(struct bnxt *bp, u8 *mac) +int bnxt_approve_mac(struct bnxt *bp, u8 *mac, bool strict) { return 0; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h index e9b20cd19881..2eed9eda1195 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h @@ -39,5 +39,5 @@ int bnxt_sriov_configure(struct pci_dev *pdev, int num_vfs); void bnxt_sriov_disable(struct bnxt *); void bnxt_hwrm_exec_fwd_req(struct bnxt *); void bnxt_update_vf_mac(struct bnxt *); -int bnxt_approve_mac(struct bnxt *, u8 *); +int bnxt_approve_mac(struct bnxt *, u8 *, bool); #endif -- cgit v1.2.3-59-g8ed1b From a15f2c08c70811f120d99288d81f70d7f3d104f1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Sep 2018 12:54:56 -0700 Subject: PCI: hv: support reporting serial number as slot information The Hyper-V host API for PCI provides a unique "serial number" which can be used as basis for sysfs PCI slot table. This can be useful for cases where userspace wants to find the PCI device based on serial number. When an SR-IOV NIC is added, the host sends an attach message with serial number. The kernel doesn't use the serial number, but it is useful when doing the same thing in a userspace driver such as the DPDK. By having /sys/bus/pci/slots/N it provides a direct way to find the matching PCI device. There maybe some cases where serial number is not unique such as when using GPU's. But the PCI slot infrastructure will handle that. This has a side effect which may also be useful. The common udev network device naming policy uses the slot information (rather than PCI address). Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/pci/controller/pci-hyperv.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index c00f82cc54aa..ee80e79db21a 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -89,6 +89,9 @@ static enum pci_protocol_version_t pci_protocol_version; #define STATUS_REVISION_MISMATCH 0xC0000059 +/* space for 32bit serial number as string */ +#define SLOT_NAME_SIZE 11 + /* * Message Types */ @@ -494,6 +497,7 @@ struct hv_pci_dev { struct list_head list_entry; refcount_t refs; enum hv_pcichild_state state; + struct pci_slot *pci_slot; struct pci_function_description desc; bool reported_missing; struct hv_pcibus_device *hbus; @@ -1457,6 +1461,34 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus) spin_unlock_irqrestore(&hbus->device_list_lock, flags); } +/* + * Assign entries in sysfs pci slot directory. + * + * Note that this function does not need to lock the children list + * because it is called from pci_devices_present_work which + * is serialized with hv_eject_device_work because they are on the + * same ordered workqueue. Therefore hbus->children list will not change + * even when pci_create_slot sleeps. + */ +static void hv_pci_assign_slots(struct hv_pcibus_device *hbus) +{ + struct hv_pci_dev *hpdev; + char name[SLOT_NAME_SIZE]; + int slot_nr; + + list_for_each_entry(hpdev, &hbus->children, list_entry) { + if (hpdev->pci_slot) + continue; + + slot_nr = PCI_SLOT(wslot_to_devfn(hpdev->desc.win_slot.slot)); + snprintf(name, SLOT_NAME_SIZE, "%u", hpdev->desc.ser); + hpdev->pci_slot = pci_create_slot(hbus->pci_bus, slot_nr, + name, NULL); + if (!hpdev->pci_slot) + pr_warn("pci_create slot %s failed\n", name); + } +} + /** * create_root_hv_pci_bus() - Expose a new root PCI bus * @hbus: Root PCI bus, as understood by this driver @@ -1480,6 +1512,7 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus) pci_lock_rescan_remove(); pci_scan_child_bus(hbus->pci_bus); pci_bus_assign_resources(hbus->pci_bus); + hv_pci_assign_slots(hbus); pci_bus_add_devices(hbus->pci_bus); pci_unlock_rescan_remove(); hbus->state = hv_pcibus_installed; @@ -1742,6 +1775,7 @@ static void pci_devices_present_work(struct work_struct *work) */ pci_lock_rescan_remove(); pci_scan_child_bus(hbus->pci_bus); + hv_pci_assign_slots(hbus); pci_unlock_rescan_remove(); break; @@ -1858,6 +1892,9 @@ static void hv_eject_device_work(struct work_struct *work) list_del(&hpdev->list_entry); spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags); + if (hpdev->pci_slot) + pci_destroy_slot(hpdev->pci_slot); + memset(&ctxt, 0, sizeof(ctxt)); ejct_pkt = (struct pci_eject_response *)&ctxt.pkt.message; ejct_pkt->message_type.type = PCI_EJECTION_COMPLETE; -- cgit v1.2.3-59-g8ed1b From 00d7ddba1143623b31bc2c15d18216e2da031b14 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 14 Sep 2018 12:54:57 -0700 Subject: hv_netvsc: pair VF based on serial number Matching network device based on MAC address is problematic since a non VF network device can be creted with a duplicate MAC address causing confusion and problems. The VMBus API does provide a serial number that is a better matching method. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 3 +++ drivers/net/hyperv/netvsc_drv.c | 58 +++++++++++++++++++++++------------------ 2 files changed, 36 insertions(+), 25 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 31c3d77b4733..fe01e141c8f8 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1203,6 +1203,9 @@ static void netvsc_send_vf(struct net_device *ndev, net_device_ctx->vf_alloc = nvmsg->msg.v4_msg.vf_assoc.allocated; net_device_ctx->vf_serial = nvmsg->msg.v4_msg.vf_assoc.serial; + netdev_info(ndev, "VF slot %u %s\n", + net_device_ctx->vf_serial, + net_device_ctx->vf_alloc ? "added" : "removed"); } static void netvsc_receive_inband(struct net_device *ndev, diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 915fbd66a02b..3af6d8d15233 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -1894,20 +1894,6 @@ out_unlock: rtnl_unlock(); } -static struct net_device *get_netvsc_bymac(const u8 *mac) -{ - struct net_device_context *ndev_ctx; - - list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { - struct net_device *dev = hv_get_drvdata(ndev_ctx->device_ctx); - - if (ether_addr_equal(mac, dev->perm_addr)) - return dev; - } - - return NULL; -} - static struct net_device *get_netvsc_byref(struct net_device *vf_netdev) { struct net_device_context *net_device_ctx; @@ -2036,26 +2022,48 @@ static void netvsc_vf_setup(struct work_struct *w) rtnl_unlock(); } +/* Find netvsc by VMBus serial number. + * The PCI hyperv controller records the serial number as the slot. + */ +static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev) +{ + struct device *parent = vf_netdev->dev.parent; + struct net_device_context *ndev_ctx; + struct pci_dev *pdev; + + if (!parent || !dev_is_pci(parent)) + return NULL; /* not a PCI device */ + + pdev = to_pci_dev(parent); + if (!pdev->slot) { + netdev_notice(vf_netdev, "no PCI slot information\n"); + return NULL; + } + + list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) { + if (!ndev_ctx->vf_alloc) + continue; + + if (ndev_ctx->vf_serial == pdev->slot->number) + return hv_get_drvdata(ndev_ctx->device_ctx); + } + + netdev_notice(vf_netdev, + "no netdev found for slot %u\n", pdev->slot->number); + return NULL; +} + static int netvsc_register_vf(struct net_device *vf_netdev) { - struct net_device *ndev; struct net_device_context *net_device_ctx; - struct device *pdev = vf_netdev->dev.parent; struct netvsc_device *netvsc_dev; + struct net_device *ndev; int ret; if (vf_netdev->addr_len != ETH_ALEN) return NOTIFY_DONE; - if (!pdev || !dev_is_pci(pdev) || dev_is_pf(pdev)) - return NOTIFY_DONE; - - /* - * We will use the MAC address to locate the synthetic interface to - * associate with the VF interface. If we don't find a matching - * synthetic interface, move on. - */ - ndev = get_netvsc_bymac(vf_netdev->perm_addr); + ndev = get_netvsc_byslot(vf_netdev); if (!ndev) return NOTIFY_DONE; -- cgit v1.2.3-59-g8ed1b From 50c6b58a814d86a93c0f6964570f839632854044 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 14 Sep 2018 23:00:55 +0200 Subject: tls: fix currently broken MSG_PEEK behavior In kTLS MSG_PEEK behavior is currently failing, strace example: [pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3 [pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4 [pid 2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2430] listen(4, 10) = 0 [pid 2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 [pid 2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5 [pid 2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2430] close(4) = 0 [pid 2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14 [pid 2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11 [pid 2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64 As can be seen from strace, there are two TLS records sent, i) 'test_read_peek' and ii) '_mult_recs\0' where we end up peeking 'test_read_peektest_read_peektest'. This is clearly wrong, and what happens is that given peek cannot call into tls_sw_advance_skb() to unpause strparser and proceed with the next skb, we end up looping over the current one, copying the 'test_read_peek' over and over into the user provided buffer. Here, we can only peek into the currently held skb (current, full TLS record) as otherwise we would end up having to hold all the original skb(s) (depending on the peek depth) in a separate queue when unpausing strparser to process next records, minimally intrusive is to return only up to the current record's size (which likely was what c46234ebb4d1 ("tls: RX path for ktls") originally intended as well). Thus, after patch we properly peek the first record: [pid 2046] wait4(2075, [pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3 [pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4 [pid 2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2075] listen(4, 10) = 0 [pid 2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 [pid 2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0 [pid 2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5 [pid 2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0 [pid 2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0 [pid 2075] close(4) = 0 [pid 2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14 [pid 2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11 [pid 2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14 Fixes: c46234ebb4d1 ("tls: RX path for ktls") Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 8 +++++++ tools/testing/selftests/net/tls.c | 49 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 9e918489f4fb..b9c6ecfbcfea 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -931,7 +931,15 @@ int tls_sw_recvmsg(struct sock *sk, if (control != TLS_RECORD_TYPE_DATA) goto recv_end; } + } else { + /* MSG_PEEK right now cannot look beyond current skb + * from strparser, meaning we cannot advance skb here + * and thus unpause strparser since we'd loose original + * one. + */ + break; } + /* If we have a new message from strparser, continue now. */ if (copied >= target && !ctx->recv_pkt) break; diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index b3ebf2646e52..8fdfeafaf8c0 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -502,6 +502,55 @@ TEST_F(tls, recv_peek_multiple) EXPECT_EQ(memcmp(test_str, buf, send_len), 0); } +TEST_F(tls, recv_peek_multiple_records) +{ + char const *test_str = "test_read_peek_mult_recs"; + char const *test_str_first = "test_read_peek"; + char const *test_str_second = "_mult_recs"; + int len; + char buf[64]; + + len = strlen(test_str_first); + EXPECT_EQ(send(self->fd, test_str_first, len, 0), len); + + len = strlen(test_str_second) + 1; + EXPECT_EQ(send(self->fd, test_str_second, len, 0), len); + + len = sizeof(buf); + memset(buf, 0, len); + EXPECT_NE(recv(self->cfd, buf, len, MSG_PEEK), -1); + + /* MSG_PEEK can only peek into the current record. */ + len = strlen(test_str_first) + 1; + EXPECT_EQ(memcmp(test_str_first, buf, len), 0); + + len = sizeof(buf); + memset(buf, 0, len); + EXPECT_NE(recv(self->cfd, buf, len, 0), -1); + + /* Non-MSG_PEEK will advance strparser (and therefore record) + * however. + */ + len = strlen(test_str) + 1; + EXPECT_EQ(memcmp(test_str, buf, len), 0); + + /* MSG_MORE will hold current record open, so later MSG_PEEK + * will see everything. + */ + len = strlen(test_str_first); + EXPECT_EQ(send(self->fd, test_str_first, len, MSG_MORE), len); + + len = strlen(test_str_second) + 1; + EXPECT_EQ(send(self->fd, test_str_second, len, 0), len); + + len = sizeof(buf); + memset(buf, 0, len); + EXPECT_NE(recv(self->cfd, buf, len, MSG_PEEK), -1); + + len = strlen(test_str) + 1; + EXPECT_EQ(memcmp(test_str, buf, len), 0); +} + TEST_F(tls, pollin) { char const *test_str = "test_poll"; -- cgit v1.2.3-59-g8ed1b From ddca24dfcf1bec608668dd44c45d49397b70f520 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Fri, 14 Sep 2018 23:46:12 +0200 Subject: net: dsa: mv88e6xxx: Fix ATU Miss Violation Fix a cut/paste error and a typo which results in ATU miss violations not being reported. Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/global1.h | 2 +- drivers/net/dsa/mv88e6xxx/global1_atu.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/global1.h b/drivers/net/dsa/mv88e6xxx/global1.h index 7c791c1da4b9..bef01331266f 100644 --- a/drivers/net/dsa/mv88e6xxx/global1.h +++ b/drivers/net/dsa/mv88e6xxx/global1.h @@ -128,7 +128,7 @@ #define MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION 0x7000 #define MV88E6XXX_G1_ATU_OP_AGE_OUT_VIOLATION BIT(7) #define MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION BIT(6) -#define MV88E6XXX_G1_ATU_OP_MISS_VIOLTATION BIT(5) +#define MV88E6XXX_G1_ATU_OP_MISS_VIOLATION BIT(5) #define MV88E6XXX_G1_ATU_OP_FULL_VIOLATION BIT(4) /* Offset 0x0C: ATU Data Register */ diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index 307410898fc9..5200e4bdce93 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -349,7 +349,7 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) chip->ports[entry.portvec].atu_member_violation++; } - if (val & MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION) { + if (val & MV88E6XXX_G1_ATU_OP_MISS_VIOLATION) { dev_err_ratelimited(chip->dev, "ATU miss violation for %pM portvec %x\n", entry.mac, entry.portvec); -- cgit v1.2.3-59-g8ed1b From c73480910e9686a5c25155cb4d418d594b678196 Mon Sep 17 00:00:00 2001 From: zhong jiang Date: Mon, 17 Sep 2018 18:44:19 +0800 Subject: net: ethernet: Fix a unused function warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: ‘lan743x_pm_suspend’ defined but not used [-Wunused-function] static int lan743x_pm_suspend(struct device *dev) drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: ‘lan743x_pm_resume’ defined but not used [-Wunused-function] static int lan743x_pm_resume(struct device *dev) Signed-off-by: zhong jiang Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/lan743x_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index e7dce79ff2c9..001b5f714c1b 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -2850,7 +2850,7 @@ static void lan743x_pcidev_shutdown(struct pci_dev *pdev) lan743x_hardware_cleanup(adapter); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static u16 lan743x_pm_wakeframe_crc16(const u8 *buf, int len) { return bitrev16(crc16(0xFFFF, buf, len)); @@ -3016,7 +3016,7 @@ static int lan743x_pm_resume(struct device *dev) static const struct dev_pm_ops lan743x_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(lan743x_pm_suspend, lan743x_pm_resume) }; -#endif /*CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static const struct pci_device_id lan743x_pcidev_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_SMSC, PCI_DEVICE_ID_SMSC_LAN7430) }, @@ -3028,7 +3028,7 @@ static struct pci_driver lan743x_pcidev_driver = { .id_table = lan743x_pcidev_tbl, .probe = lan743x_pcidev_probe, .remove = lan743x_pcidev_remove, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .driver.pm = &lan743x_pm_ops, #endif .shutdown = lan743x_pcidev_shutdown, -- cgit v1.2.3-59-g8ed1b From 324493fba77500592bbaa66421729421f139d4b5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 14 Aug 2018 12:02:31 -0400 Subject: media: platform: fix cros-ec-cec build error Fix build when MFD_CROS_EC is not enabled but COMPILE_TEST=y. Fixes this build error: ERROR: "cros_ec_cmd_xfer_status" [drivers/media/platform/cros-ec-cec/cros-ec-cec.ko] undefined! Signed-off-by: Randy Dunlap Cc: Neil Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 94c1fe0e9787..54fe90acb5b2 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -541,6 +541,8 @@ config VIDEO_CROS_EC_CEC depends on MFD_CROS_EC select CEC_CORE select CEC_NOTIFIER + select CHROME_PLATFORMS + select CROS_EC_PROTO ---help--- If you say yes here you will get support for the ChromeOS Embedded Controller's CEC. -- cgit v1.2.3-59-g8ed1b From 250ae0d46d857ed61f3e0abf584901e46bd2c638 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Sun, 2 Sep 2018 12:01:53 +0300 Subject: net/mlx5: Fix read from coherent memory Use accessor function READ_ONCE to read from coherent memory modified by the device and read by the driver. This becomes most important in preemptive kernels where cond_resched implementation does not have the side effect which guaranteed the updated value. Fixes: 269d26f47f6f ("net/mlx5: Reduce command polling interval") Change-Id: Ie6deeb565ffaf76777b07448c7fbcce3510bbb8a Signed-off-by: Eli Cohen Reported-by: Jesper Dangaard Brouer Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 3ce14d42ddc8..a53736c26c0c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -206,7 +206,7 @@ static void poll_timeout(struct mlx5_cmd_work_ent *ent) u8 own; do { - own = ent->lay->status_own; + own = READ_ONCE(ent->lay->status_own); if (!(own & CMD_OWNER_HW)) { ent->ret = 0; return; -- cgit v1.2.3-59-g8ed1b From 6b359d5550a1ae7a1269c9dc1dd73dfdc4d6fe58 Mon Sep 17 00:00:00 2001 From: Alaa Hleihel Date: Mon, 3 Sep 2018 10:38:14 +0300 Subject: net/mlx5: Check for SQ and not RQ state when modifying hairpin SQ When modifying hairpin SQ, instead of checking if the next state equals to MLX5_SQC_STATE_RDY, we compare it against the MLX5_RQC_STATE_RDY enum value. The code worked since both of MLX5_RQC_STATE_RDY and MLX5_SQC_STATE_RDY have the same value today. This patch fixes this issue. Fixes: 18e568c390c6 ("net/mlx5: Hairpin pair core object setup") Change-Id: I6758aa7b4bd137966ae28206b70648c5bc223b46 Signed-off-by: Alaa Hleihel Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/transobj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c index dae1c5c5d27c..d2f76070ea7c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c @@ -509,7 +509,7 @@ static int mlx5_hairpin_modify_sq(struct mlx5_core_dev *peer_mdev, u32 sqn, sqc = MLX5_ADDR_OF(modify_sq_in, in, ctx); - if (next_state == MLX5_RQC_STATE_RDY) { + if (next_state == MLX5_SQC_STATE_RDY) { MLX5_SET(sqc, sqc, hairpin_peer_rq, peer_rq); MLX5_SET(sqc, sqc, hairpin_peer_vhca, peer_vhca); } -- cgit v1.2.3-59-g8ed1b From 8f92e35aff9692028279d3c03e88547df6d15020 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Sat, 15 Sep 2018 00:50:02 -0700 Subject: net/mlx5e: TLS, Read capabilities only when it is safe Read TLS caps from the core driver only when TLS is supported, i.e mlx5_accel_is_tls_device returns true. Fixes: 790af90c00d2 ("net/mlx5e: TLS, build TLS netdev from capabilities") Change-Id: I5f21ff4d684901af487e366a7e0cf032b54ee9cf Reported-by: Michal Kubecek Signed-off-by: Saeed Mahameed Reviewed-by: Boris Pismenny Reviewed-by: Tariq Toukan --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c index eddd7702680b..e88340e196f7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c @@ -183,12 +183,13 @@ static const struct tlsdev_ops mlx5e_tls_ops = { void mlx5e_tls_build_netdev(struct mlx5e_priv *priv) { - u32 caps = mlx5_accel_tls_device_caps(priv->mdev); struct net_device *netdev = priv->netdev; + u32 caps; if (!mlx5_accel_is_tls_device(priv->mdev)) return; + caps = mlx5_accel_tls_device_caps(priv->mdev); if (caps & MLX5_ACCEL_TLS_TX) { netdev->features |= NETIF_F_HW_TLS_TX; netdev->hw_features |= NETIF_F_HW_TLS_TX; -- cgit v1.2.3-59-g8ed1b From 83f365554e47997ec68dc4eca3f5dce525cd15c3 Mon Sep 17 00:00:00 2001 From: Vaibhav Nagarnaik Date: Fri, 7 Sep 2018 15:31:29 -0700 Subject: ring-buffer: Allow for rescheduling when removing pages When reducing ring buffer size, pages are removed by scheduling a work item on each CPU for the corresponding CPU ring buffer. After the pages are removed from ring buffer linked list, the pages are free()d in a tight loop. The loop does not give up CPU until all pages are removed. In a worst case behavior, when lot of pages are to be freed, it can cause system stall. After the pages are removed from the list, the free() can happen while the work is rescheduled. Call cond_resched() in the loop to prevent the system hangup. Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com Cc: stable@vger.kernel.org Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic") Reported-by: Jason Behmer Signed-off-by: Vaibhav Nagarnaik Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 1d92d4a982fd..65bd4616220d 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1546,6 +1546,8 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages) tmp_iter_page = first_page; do { + cond_resched(); + to_remove_page = tmp_iter_page; rb_inc_page(cpu_buffer, &tmp_iter_page); -- cgit v1.2.3-59-g8ed1b From 3c499ea0c662e2f38aafbd4f516b08aab8cfa0e5 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Mon, 17 Sep 2018 13:37:33 -0400 Subject: drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation As pointed out by Daniel Vetter, we should be usinng drm_drv_uses_atomic_modeset() for determining whether or not we want to make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as the former isn't an accurate representation of whether or not the driver is actually using atomic modesetting internally (even though it might not be exposing atomic capabilities). Signed-off-by: Lyude Paul Cc: Daniel Vetter Cc: stable@vger.kernel.org Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com --- drivers/gpu/drm/drm_atomic.c | 2 +- drivers/gpu/drm/drm_debugfs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 3eb061e11e2e..018fcdb353d2 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -2067,7 +2067,7 @@ static void __drm_state_dump(struct drm_device *dev, struct drm_printer *p, struct drm_connector *connector; struct drm_connector_list_iter conn_iter; - if (!drm_core_check_feature(dev, DRIVER_ATOMIC)) + if (!drm_drv_uses_atomic_modeset(dev)) return; list_for_each_entry(plane, &config->plane_list, head) { diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c index 6f28fe58f169..373bd4c2b698 100644 --- a/drivers/gpu/drm/drm_debugfs.c +++ b/drivers/gpu/drm/drm_debugfs.c @@ -151,7 +151,7 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id, return ret; } - if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { + if (drm_drv_uses_atomic_modeset(dev)) { ret = drm_atomic_debugfs_init(minor); if (ret) { DRM_ERROR("Failed to create atomic debugfs files\n"); -- cgit v1.2.3-59-g8ed1b From 072222b488bc55cce92ff246bdc10115fd57d3ab Mon Sep 17 00:00:00 2001 From: Dominique Martinet Date: Tue, 11 Sep 2018 11:21:43 +0200 Subject: kcm: remove any offset before parsing messages The current code assumes kcm users know they need to look for the strparser offset within their bpf program, which is not documented anywhere and examples laying around do not do. The actual recv function does handle the offset well, so we can create a temporary clone of the skb and pull that one up as required for parsing. The pull itself has a cost if we are pulling beyond the head data, measured to 2-3% latency in a noisy VM with a local client stressing that path. The clone's impact seemed too small to measure. This bug can be exhibited easily by implementing a "trivial" kcm parser taking the first bytes as size, and on the client sending at least two such packets in a single write(). Note that bpf sockmap has the same problem, both for parse and for recv, so it would pulling twice or a real pull within the strparser logic if anyone cares about that. Signed-off-by: Dominique Martinet Signed-off-by: David S. Miller --- net/kcm/kcmsock.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 571d824e4e24..36c438b95955 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -381,8 +381,32 @@ static int kcm_parse_func_strparser(struct strparser *strp, struct sk_buff *skb) { struct kcm_psock *psock = container_of(strp, struct kcm_psock, strp); struct bpf_prog *prog = psock->bpf_prog; + struct sk_buff *clone_skb = NULL; + struct strp_msg *stm; + int rc; + + stm = strp_msg(skb); + if (stm->offset) { + skb = clone_skb = skb_clone(skb, GFP_ATOMIC); + if (!clone_skb) + return -ENOMEM; + + if (!pskb_pull(clone_skb, stm->offset)) { + rc = -ENOMEM; + goto out; + } + + /* reset cloned skb's offset for bpf programs using it */ + stm = strp_msg(clone_skb); + stm->offset = 0; + } + + rc = (*prog->bpf_func)(skb, prog->insnsi); +out: + if (clone_skb) + kfree_skb(clone_skb); - return (*prog->bpf_func)(skb, prog->insnsi); + return rc; } static int kcm_read_sock_done(struct strparser *strp, int err) -- cgit v1.2.3-59-g8ed1b From 3275b4df3c39f97ee3fe982c9bafd6f3b7ff0dfe Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 17 Sep 2018 18:43:42 -0700 Subject: Revert "kcm: remove any offset before parsing messages" This reverts commit 072222b488bc55cce92ff246bdc10115fd57d3ab. I just read that this causes regressions. Signed-off-by: David S. Miller --- net/kcm/kcmsock.c | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) diff --git a/net/kcm/kcmsock.c b/net/kcm/kcmsock.c index 36c438b95955..571d824e4e24 100644 --- a/net/kcm/kcmsock.c +++ b/net/kcm/kcmsock.c @@ -381,32 +381,8 @@ static int kcm_parse_func_strparser(struct strparser *strp, struct sk_buff *skb) { struct kcm_psock *psock = container_of(strp, struct kcm_psock, strp); struct bpf_prog *prog = psock->bpf_prog; - struct sk_buff *clone_skb = NULL; - struct strp_msg *stm; - int rc; - - stm = strp_msg(skb); - if (stm->offset) { - skb = clone_skb = skb_clone(skb, GFP_ATOMIC); - if (!clone_skb) - return -ENOMEM; - - if (!pskb_pull(clone_skb, stm->offset)) { - rc = -ENOMEM; - goto out; - } - - /* reset cloned skb's offset for bpf programs using it */ - stm = strp_msg(clone_skb); - stm->offset = 0; - } - - rc = (*prog->bpf_func)(skb, prog->insnsi); -out: - if (clone_skb) - kfree_skb(clone_skb); - return rc; + return (*prog->bpf_func)(skb, prog->insnsi); } static int kcm_read_sock_done(struct strparser *strp, int err) -- cgit v1.2.3-59-g8ed1b From 94235460f9eaefc4f0a3a4a6014fb4c6db4241cc Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 12 Sep 2018 14:58:20 +0800 Subject: r8169: Align ASPM/CLKREQ setting function with vendor driver There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by: Kai-Heng Feng Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 1d8631303b53..8195b1f5036d 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4775,12 +4775,14 @@ static void rtl_pcie_state_l2l3_enable(struct rtl8169_private *tp, bool enable) static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable) { if (enable) { - RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn); RTL_W8(tp, Config5, RTL_R8(tp, Config5) | ASPM_en); + RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn); } else { RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~ClkReqEn); RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~ASPM_en); } + + udelay(10); } static void rtl_hw_start_8168bb(struct rtl8169_private *tp) -- cgit v1.2.3-59-g8ed1b From 0866cd15029baa3331ba347794053472306e8eb3 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Wed, 12 Sep 2018 14:58:21 +0800 Subject: r8169: enable ASPM on RTL8106E The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by: Kai-Heng Feng Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 8195b1f5036d..b0a803e96634 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5627,6 +5627,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp) static void rtl_hw_start_8106(struct rtl8169_private *tp) { + rtl_hw_aspm_clkreq_enable(tp, false); + /* Force LAN exit from ASPM if Rx/Tx are not idle */ RTL_W32(tp, FuncEvent, RTL_R32(tp, FuncEvent) | 0x002800); @@ -5635,6 +5637,7 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp) RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) & ~PFM_EN); rtl_pcie_state_l2l3_enable(tp, false); + rtl_hw_aspm_clkreq_enable(tp, true); } static void rtl_hw_start_8101(struct rtl8169_private *tp) -- cgit v1.2.3-59-g8ed1b From b1e3454d39f992e5409cd19f97782185950df6e7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 12 Sep 2018 11:34:54 +0200 Subject: clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i2 or S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk" alias, so that the relevant ethernet drivers can try to (optionally) use this, without needing X86 specific code / hacks, thus fixing ethernet on these devices without breaking S0i3 support. This commit uses clkdev_hw_create() to create the alias, mirroring the code for the already existing "mclk" alias for pmc_plt_clk_3. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach Cc: Carlo Caione Reported-by: Johannes Stezenbach Acked-by: Stephen Boyd Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: David S. Miller --- drivers/clk/x86/clk-pmc-atom.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clk/x86/clk-pmc-atom.c b/drivers/clk/x86/clk-pmc-atom.c index 08ef69945ffb..75151901ff7d 100644 --- a/drivers/clk/x86/clk-pmc-atom.c +++ b/drivers/clk/x86/clk-pmc-atom.c @@ -55,6 +55,7 @@ struct clk_plt_data { u8 nparents; struct clk_plt *clks[PMC_CLK_NUM]; struct clk_lookup *mclk_lookup; + struct clk_lookup *ether_clk_lookup; }; /* Return an index in parent table */ @@ -351,11 +352,20 @@ static int plt_clk_probe(struct platform_device *pdev) goto err_unreg_clk_plt; } + data->ether_clk_lookup = clkdev_hw_create(&data->clks[4]->hw, + "ether_clk", NULL); + if (!data->ether_clk_lookup) { + err = -ENOMEM; + goto err_drop_mclk; + } + plt_clk_free_parent_names_loop(parent_names, data->nparents); platform_set_drvdata(pdev, data); return 0; +err_drop_mclk: + clkdev_drop(data->mclk_lookup); err_unreg_clk_plt: plt_clk_unregister_loop(data, i); plt_clk_unregister_parents(data); @@ -369,6 +379,7 @@ static int plt_clk_remove(struct platform_device *pdev) data = platform_get_drvdata(pdev); + clkdev_drop(data->ether_clk_lookup); clkdev_drop(data->mclk_lookup); plt_clk_unregister_loop(data, PMC_CLK_NUM); plt_clk_unregister_parents(data); -- cgit v1.2.3-59-g8ed1b From c2f6f3ee7f22521fabc3295f51149bc3f4dd9202 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 12 Sep 2018 11:34:55 +0200 Subject: r8169: Get and enable optional ether_clk clock On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach Cc: Carlo Caione Reported-by: Johannes Stezenbach Acked-by: Stephen Boyd Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index b0a803e96634..bb529ff2ca81 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -665,6 +666,7 @@ struct rtl8169_private { u16 event_slow; const struct rtl_coalesce_info *coalesce_info; + struct clk *clk; struct mdio_ops { void (*write)(struct rtl8169_private *, int, int); @@ -7262,6 +7264,11 @@ static int rtl_jumbo_max(struct rtl8169_private *tp) } } +static void rtl_disable_clk(void *data) +{ + clk_disable_unprepare(data); +} + static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data; @@ -7282,6 +7289,32 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); tp->supports_gmii = cfg->has_gmii; + /* Get the *optional* external "ether_clk" used on some boards */ + tp->clk = devm_clk_get(&pdev->dev, "ether_clk"); + if (IS_ERR(tp->clk)) { + rc = PTR_ERR(tp->clk); + if (rc == -ENOENT) { + /* clk-core allows NULL (for suspend / resume) */ + tp->clk = NULL; + } else if (rc == -EPROBE_DEFER) { + return rc; + } else { + dev_err(&pdev->dev, "failed to get clk: %d\n", rc); + return rc; + } + } else { + rc = clk_prepare_enable(tp->clk); + if (rc) { + dev_err(&pdev->dev, "failed to enable clk: %d\n", rc); + return rc; + } + + rc = devm_add_action_or_reset(&pdev->dev, rtl_disable_clk, + tp->clk); + if (rc) + return rc; + } + /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pcim_enable_device(pdev); if (rc < 0) { -- cgit v1.2.3-59-g8ed1b From 648e921888ad96ea3dc922739e96716ad3225d7f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 12 Sep 2018 11:34:56 +0200 Subject: clk: x86: Stop marking clocks as CLK_IS_CRITICAL Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver has been modified to get and enable this clock (if present) the marking of the clocks as CLK_IS_CRITICAL is no longer necessary. This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail devices not being able to reach S0i3 greatly decreasing their battery drain when suspended. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach Cc: Carlo Caione Reported-by: Johannes Stezenbach Reviewed-by: Andy Shevchenko Acked-by: Stephen Boyd Signed-off-by: Hans de Goede Signed-off-by: David S. Miller --- drivers/clk/x86/clk-pmc-atom.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/clk/x86/clk-pmc-atom.c b/drivers/clk/x86/clk-pmc-atom.c index 75151901ff7d..d977193842df 100644 --- a/drivers/clk/x86/clk-pmc-atom.c +++ b/drivers/clk/x86/clk-pmc-atom.c @@ -187,13 +187,6 @@ static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id, pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE; spin_lock_init(&pclk->lock); - /* - * If the clock was already enabled by the firmware mark it as critical - * to avoid it being gated by the clock framework if no driver owns it. - */ - if (plt_clk_is_enabled(&pclk->hw)) - init.flags |= CLK_IS_CRITICAL; - ret = devm_clk_hw_register(&pdev->dev, &pclk->hw); if (ret) { pclk = ERR_PTR(ret); -- cgit v1.2.3-59-g8ed1b From 922005c7f50e7f4b2a6dbc182e9c575b4f92396b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 17 Sep 2018 22:00:24 +0200 Subject: qmi_wwan: set DTR for modems in forced USB2 mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini Reported-by: Deshu Wen Signed-off-by: Bjørn Mork Reported-by: Fred Veldini Reported-by: Deshu Wen Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index e3270deecec2..533b6fb8d923 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1213,13 +1213,13 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */ {QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */ {QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */ - {QMI_FIXED_INTF(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ - {QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */ - {QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */ - {QMI_FIXED_INTF(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */ + {QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ -- cgit v1.2.3-59-g8ed1b From db7c8f1e5f1c1a5e1aaec04e50be6721c1cb4dff Mon Sep 17 00:00:00 2001 From: Colin Xu Date: Mon, 17 Sep 2018 12:19:03 +0800 Subject: drm/i915/gvt: Init PHY related registers for BXT Recent patch fixed the call trace "ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)". but introduced another similar call trace shown as: "ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)". The call trace will appear when host and guest enabled different ports, i.e. host using PORT C or neither PORT is enabled, while guest is always using PORT B as simulated by gvt. The issue is actually covered previously before the commit and reverals now when the commit do the right thing. On BXT, some PHY registers are initialized by vbios, before i915 loaded. Later i915 will re-program some, or skip some based on the implementation. The initialized mmio for guest i915 is done by gvt, based on the snapshot taken from host. If host and guest have different PORT enabled, some DPIO PHY mmios that gvt initialized for guest i915 will not match the simualted monitor for guest, which leads to guest i915 print the calltrace when it's trying to enable PHY and PORT. The solution is to init these DPIO PHY registers to default value, then guest i915 will program them to reasonable value based on the default powerwell table and enabled PORT. Together with the old patch, all similar call trace in guest kernel on BXT can be resolved. v2: Move PHY register init to intel_vgpu_reset_mmio (Min) v3: Do not delete empty line in issue fix patch. (zhenyu) Fixes: c8ab5ac30ccc ("drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY") Reviewed-by: He, Min Signed-off-by: Colin Xu Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/mmio.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/mmio.c b/drivers/gpu/drm/i915/gvt/mmio.c index 994366035364..9bb9a85c992c 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.c +++ b/drivers/gpu/drm/i915/gvt/mmio.c @@ -244,6 +244,34 @@ void intel_vgpu_reset_mmio(struct intel_vgpu *vgpu, bool dmlr) /* set the bit 0:2(Core C-State ) to C0 */ vgpu_vreg_t(vgpu, GEN6_GT_CORE_STATUS) = 0; + + if (IS_BROXTON(vgpu->gvt->dev_priv)) { + vgpu_vreg_t(vgpu, BXT_P_CR_GT_DISP_PWRON) &= + ~(BIT(0) | BIT(1)); + vgpu_vreg_t(vgpu, BXT_PORT_CL1CM_DW0(DPIO_PHY0)) &= + ~PHY_POWER_GOOD; + vgpu_vreg_t(vgpu, BXT_PORT_CL1CM_DW0(DPIO_PHY1)) &= + ~PHY_POWER_GOOD; + vgpu_vreg_t(vgpu, BXT_PHY_CTL_FAMILY(DPIO_PHY0)) &= + ~BIT(30); + vgpu_vreg_t(vgpu, BXT_PHY_CTL_FAMILY(DPIO_PHY1)) &= + ~BIT(30); + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_A)) &= + ~BXT_PHY_LANE_ENABLED; + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_A)) |= + BXT_PHY_CMNLANE_POWERDOWN_ACK | + BXT_PHY_LANE_POWERDOWN_ACK; + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_B)) &= + ~BXT_PHY_LANE_ENABLED; + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_B)) |= + BXT_PHY_CMNLANE_POWERDOWN_ACK | + BXT_PHY_LANE_POWERDOWN_ACK; + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_C)) &= + ~BXT_PHY_LANE_ENABLED; + vgpu_vreg_t(vgpu, BXT_PHY_CTL(PORT_C)) |= + BXT_PHY_CMNLANE_POWERDOWN_ACK | + BXT_PHY_LANE_POWERDOWN_ACK; + } } else { #define GVT_GEN8_MMIO_RESET_OFFSET (0x44200) /* only reset the engine related, so starting with 0x44200 -- cgit v1.2.3-59-g8ed1b From d817de3bc186c305b8e72a52547df2971c06499d Mon Sep 17 00:00:00 2001 From: Colin Xu Date: Fri, 14 Sep 2018 15:12:23 +0800 Subject: drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler Host prints lots of untracked MMIO at 0x4653c when creating linux guest. "gvt: vgpu 2: untracked MMIO 0004653c len 4" GEN9_CLKGATE_DIS_4 (0x4653c) is accessed by i915 for gmbus clockgating. However vgpu doesn't support any clockgating powergating operations on related mmio access trap so need add it to default handler. GEN9_CLKGATE_DIS_4 is accessed in bxt_gmbus_clock_gating() which only applies to GEN9_LP so doens't show the warning on other platforms. The solution is to add it to default handler init_bxt_mmio_info(). Reviewed-by: He, Min Signed-off-by: Colin Xu Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/handlers.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index 72afa518edd9..94c1089ecf59 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -3210,6 +3210,7 @@ static int init_bxt_mmio_info(struct intel_gvt *gvt) MMIO_D(BXT_DSI_PLL_ENABLE, D_BXT); MMIO_D(GEN9_CLKGATE_DIS_0, D_BXT); + MMIO_D(GEN9_CLKGATE_DIS_4, D_BXT); MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_A), D_BXT); MMIO_D(HSW_TVIDEO_DIP_GCP(TRANSCODER_B), D_BXT); -- cgit v1.2.3-59-g8ed1b From a1ac5f0943019bfd76345fe05a42cbc400da685c Mon Sep 17 00:00:00 2001 From: Weinan Li Date: Mon, 17 Sep 2018 09:46:14 +0800 Subject: drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid Fix the suspicious RCU usage issue in intel_vgpu_emulate_mmio_write. Here need to request the srcu read lock of kvm->srcu before doing gfn_to_memslot(). The detailed log is as below: [ 218.710688] ============================= [ 218.710690] WARNING: suspicious RCU usage [ 218.710693] 4.14.15-dd+ #314 Tainted: G U [ 218.710695] ----------------------------- [ 218.710697] ./include/linux/kvm_host.h:575 suspicious rcu_dereference_check() usage! [ 218.710699] other info that might help us debug this: [ 218.710702] rcu_scheduler_active = 2, debug_locks = 1 [ 218.710704] 1 lock held by qemu-system-x86/2144: [ 218.710706] #0: (&gvt->lock){+.+.}, at: [] intel_vgpu_emulate_mmio_write+0x5a/0x2d0 [ 218.710721] stack backtrace: [ 218.710724] CPU: 0 PID: 2144 Comm: qemu-system-x86 Tainted: G U 4.14.15-dd+ #314 [ 218.710727] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 [ 218.710729] Call Trace: [ 218.710734] dump_stack+0x7c/0xb3 [ 218.710739] gfn_to_memslot+0x15f/0x170 [ 218.710743] kvm_is_visible_gfn+0xa/0x30 [ 218.710746] intel_vgpu_emulate_gtt_mmio_write+0x267/0x3c0 [ 218.710751] ? __mutex_unlock_slowpath+0x3b/0x260 [ 218.710754] intel_vgpu_emulate_mmio_write+0x182/0x2d0 [ 218.710759] intel_vgpu_rw+0xba/0x170 [kvmgt] [ 218.710763] intel_vgpu_write+0x14d/0x1a0 [kvmgt] [ 218.710767] __vfs_write+0x23/0x130 [ 218.710770] vfs_write+0xb0/0x1b0 [ 218.710774] SyS_pwrite64+0x73/0x90 [ 218.710777] entry_SYSCALL_64_fastpath+0x25/0x9c [ 218.710780] RIP: 0033:0x7f33e8a91da3 [ 218.710783] RSP: 002b:00007f33dddc8700 EFLAGS: 00000293 v2: add 'Fixes' tag, refine log format.(Zhenyu) Fixes: cc753fbe1ac4 ("drm/i915/gvt: validate gfn before set shadow page") Reviewed-by: Zhenyu Wang Signed-off-by: Weinan Li Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/kvmgt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c index c7afee37b2b8..9ad89e38f6c0 100644 --- a/drivers/gpu/drm/i915/gvt/kvmgt.c +++ b/drivers/gpu/drm/i915/gvt/kvmgt.c @@ -1833,6 +1833,8 @@ static bool kvmgt_is_valid_gfn(unsigned long handle, unsigned long gfn) { struct kvmgt_guest_info *info; struct kvm *kvm; + int idx; + bool ret; if (!handle_valid(handle)) return false; @@ -1840,8 +1842,11 @@ static bool kvmgt_is_valid_gfn(unsigned long handle, unsigned long gfn) info = (struct kvmgt_guest_info *)handle; kvm = info->kvm; - return kvm_is_visible_gfn(kvm, gfn); + idx = srcu_read_lock(&kvm->srcu); + ret = kvm_is_visible_gfn(kvm, gfn); + srcu_read_unlock(&kvm->srcu, idx); + return ret; } struct intel_gvt_mpt kvmgt_mpt = { -- cgit v1.2.3-59-g8ed1b From 7759ca3aac79648d01c9edcb3b00503c02bec2f5 Mon Sep 17 00:00:00 2001 From: Zhipeng Gong Date: Mon, 17 Sep 2018 15:45:08 +0800 Subject: drm/i915/gvt: clear ggtt entries when destroy vgpu When one vgpu is destroyed, its ggtt entries are not cleared. This patch clears ggtt entries to avoid information leak. v2: add 'Fixes' tag (Zhenyu) Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Zhipeng Gong Reviewed-by: Hang Yuan Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/vgpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/gvt/vgpu.c b/drivers/gpu/drm/i915/gvt/vgpu.c index a4e8e3cf74fd..c628be05fbfe 100644 --- a/drivers/gpu/drm/i915/gvt/vgpu.c +++ b/drivers/gpu/drm/i915/gvt/vgpu.c @@ -281,6 +281,7 @@ void intel_gvt_destroy_vgpu(struct intel_vgpu *vgpu) intel_vgpu_clean_submission(vgpu); intel_vgpu_clean_display(vgpu); intel_vgpu_clean_opregion(vgpu); + intel_vgpu_reset_ggtt(vgpu, true); intel_vgpu_clean_gtt(vgpu); intel_gvt_hypervisor_detach_vgpu(vgpu); intel_vgpu_free_resource(vgpu); -- cgit v1.2.3-59-g8ed1b From 30bfd93062814d6767e452a8f5ddcd97f7e38c7e Mon Sep 17 00:00:00 2001 From: Peter Oskolkov Date: Mon, 17 Sep 2018 10:20:53 -0700 Subject: net/ipv6: do not copy dst flags on rt init DST_NOCOUNT in dst_entry::flags tracks whether the entry counts toward route cache size (net->ipv6.sysctl.ip6_rt_max_size). If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented in dist_init() and decremented in dst_destroy(). This flag is tied to allocation/deallocation of dst_entry and should not be copied from another dst/route. Otherwise it can happen that dst_ops::pcpuc_entries counter grows until no new routes can be allocated because the counter reached ip6_rt_max_size due to DST_NOCOUNT not set and thus no counter decrements on gc-ed routes. Fixes: 3b6761d18bc1 ("net/ipv6: Move dst flags to booleans in fib entries") Cc: David Ahern Acked-by: Wei Wang Signed-off-by: Peter Oskolkov Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 3eed045c65a5..480a79f47c52 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -946,8 +946,6 @@ static void ip6_rt_init_dst_reject(struct rt6_info *rt, struct fib6_info *ort) static void ip6_rt_init_dst(struct rt6_info *rt, struct fib6_info *ort) { - rt->dst.flags |= fib6_info_dst_flags(ort); - if (ort->fib6_flags & RTF_REJECT) { ip6_rt_init_dst_reject(rt, ort); return; -- cgit v1.2.3-59-g8ed1b From 4a3e85f2674cbfb81052059107d0165269778e2f Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 17 Sep 2018 16:31:30 +0200 Subject: mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Jarkko Nikula Cc: Signed-off-by: Boris Brezillon Tested-by: Jarkko Nikula Reviewed-by: Jarkko Nikula --- drivers/mtd/devices/m25p80.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index cbfafc453274..270d3c9580c5 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -39,13 +39,23 @@ static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(len, val, 1)); + SPI_MEM_OP_DATA_IN(len, NULL, 1)); + void *scratchbuf; int ret; + scratchbuf = kmalloc(len, GFP_KERNEL); + if (!scratchbuf) + return -ENOMEM; + + op.data.buf.in = scratchbuf; ret = spi_mem_exec_op(flash->spimem, &op); if (ret < 0) dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, code); + else + memcpy(val, scratchbuf, len); + + kfree(scratchbuf); return ret; } @@ -56,9 +66,19 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), SPI_MEM_OP_NO_ADDR, SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(len, buf, 1)); + SPI_MEM_OP_DATA_OUT(len, NULL, 1)); + void *scratchbuf; + int ret; - return spi_mem_exec_op(flash->spimem, &op); + scratchbuf = kmemdup(buf, len, GFP_KERNEL); + if (!scratchbuf) + return -ENOMEM; + + op.data.buf.out = scratchbuf; + ret = spi_mem_exec_op(flash->spimem, &op); + kfree(scratchbuf); + + return ret; } static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, -- cgit v1.2.3-59-g8ed1b From 57078338b2e4c07fb76bef23369cae0acfb1f7bc Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 18 Sep 2018 16:20:18 +1000 Subject: drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers. vgem seems to oops on the intel CI due to the vgem debugfs init hitting this path now. Check if we have mode_config funcs before checking one. Signed-off-by: Dave Airlie Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180918062018.24942-1-airlied@gmail.com --- include/drm/drm_drv.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index 46a8009784df..152b3055e9e1 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -675,7 +675,7 @@ static inline bool drm_core_check_feature(struct drm_device *dev, int feature) static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev) { return drm_core_check_feature(dev, DRIVER_ATOMIC) || - dev->mode_config.funcs->atomic_commit != NULL; + (dev->mode_config.funcs && dev->mode_config.funcs->atomic_commit != NULL); } -- cgit v1.2.3-59-g8ed1b From 51c3c62b58b357e8d35e4cc32f7b4ec907426fe3 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 14 Sep 2018 11:14:11 +1000 Subject: powerpc: Avoid code patching freed init sections This stops us from doing code patching in init sections after they've been freed. In this chain: kvm_guest_init() -> kvm_use_magic_page() -> fault_in_pages_readable() -> __get_user() -> __get_user_nocheck() -> barrier_nospec(); We have a code patching location at barrier_nospec() and kvm_guest_init() is an init function. This whole chain gets inlined, so when we free the init section (hence kvm_guest_init()), this code goes away and hence should no longer be patched. We seen this as userspace memory corruption when using a memory checker while doing partition migration testing on powervm (this starts the code patching post migration via /sys/kernel/mobility/migration). In theory, it could also happen when using /sys/kernel/debug/powerpc/barrier_nospec. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Michael Neuling Reviewed-by: Nicholas Piggin Reviewed-by: Christophe Leroy Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/setup.h | 1 + arch/powerpc/lib/code-patching.c | 6 ++++++ arch/powerpc/mm/mem.c | 2 ++ 3 files changed, 9 insertions(+) diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index 1a951b00465d..1fffbba8d6a5 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -9,6 +9,7 @@ extern void ppc_printk_progress(char *s, unsigned short hex); extern unsigned int rtas_data; extern unsigned long long memory_limit; +extern bool init_mem_is_free; extern unsigned long klimit; extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 850f3b8f4da5..6ae2777c220d 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -28,6 +28,12 @@ static int __patch_instruction(unsigned int *exec_addr, unsigned int instr, { int err; + /* Make sure we aren't patching a freed init section */ + if (init_mem_is_free && init_section_contains(exec_addr, 4)) { + pr_debug("Skipping init section patching addr: 0x%px\n", exec_addr); + return 0; + } + __put_user_size(instr, patch_addr, 4, err); if (err) return err; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 5c8530d0c611..04ccb274a620 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -63,6 +63,7 @@ #endif unsigned long long memory_limit; +bool init_mem_is_free; #ifdef CONFIG_HIGHMEM pte_t *kmap_pte; @@ -396,6 +397,7 @@ void free_initmem(void) { ppc_md.progress = ppc_printk_progress; mark_initmem_nx(); + init_mem_is_free = true; free_initmem_default(POISON_FREE_INITMEM); } -- cgit v1.2.3-59-g8ed1b From 6d41907c630d3196be89c9ed5a7f8258486b3eaf Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 14 Sep 2018 16:47:14 -0300 Subject: tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systems Same problem that got fixed in a similar fashion in tools/perf/ in c8b5f2c96d1b ("tools: Introduce str_error_r()"), fix it in the same way, licensing needs to be sorted out to libbpf to use libapi, so, for this simple case, just get the same wrapper in tools/lib/bpf. This makes libbpf and its users (bpftool, selftests, perf) to build again in Alpine Linux 3.[45678] and edge. Acked-by: Alexei Starovoitov Cc: Adrian Hunter Cc: Daniel Borkmann Cc: David Ahern Cc: Hendrik Brueckner Cc: Jakub Kicinski Cc: Jiri Olsa Cc: Martin KaFai Lau Cc: Namhyung Kim Cc: Quentin Monnet Cc: Thomas Richter Cc: Wang Nan Cc: Yonghong Song Fixes: 1ce6a9fc1549 ("bpf: fix build error in libbpf with EXTRA_CFLAGS="-Wp, -D_FORTIFY_SOURCE=2 -O2"") Link: https://lkml.kernel.org/r/20180917151636.GA21790@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/bpf/Build | 2 +- tools/lib/bpf/libbpf.c | 20 ++++++++++---------- tools/lib/bpf/str_error.c | 18 ++++++++++++++++++ tools/lib/bpf/str_error.h | 6 ++++++ 4 files changed, 35 insertions(+), 11 deletions(-) create mode 100644 tools/lib/bpf/str_error.c create mode 100644 tools/lib/bpf/str_error.h diff --git a/tools/lib/bpf/Build b/tools/lib/bpf/Build index 13a861135127..6eb9bacd1948 100644 --- a/tools/lib/bpf/Build +++ b/tools/lib/bpf/Build @@ -1 +1 @@ -libbpf-y := libbpf.o bpf.o nlattr.o btf.o libbpf_errno.o +libbpf-y := libbpf.o bpf.o nlattr.o btf.o libbpf_errno.o str_error.o diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 2abd0f112627..bdb94939fd60 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -50,6 +50,7 @@ #include "libbpf.h" #include "bpf.h" #include "btf.h" +#include "str_error.h" #ifndef EM_BPF #define EM_BPF 247 @@ -469,7 +470,7 @@ static int bpf_object__elf_init(struct bpf_object *obj) obj->efile.fd = open(obj->path, O_RDONLY); if (obj->efile.fd < 0) { char errmsg[STRERR_BUFSIZE]; - char *cp = strerror_r(errno, errmsg, sizeof(errmsg)); + char *cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("failed to open %s: %s\n", obj->path, cp); return -errno; @@ -810,8 +811,7 @@ static int bpf_object__elf_collect(struct bpf_object *obj) data->d_size, name, idx); if (err) { char errmsg[STRERR_BUFSIZE]; - char *cp = strerror_r(-err, errmsg, - sizeof(errmsg)); + char *cp = str_error(-err, errmsg, sizeof(errmsg)); pr_warning("failed to alloc program %s (%s): %s", name, obj->path, cp); @@ -1140,7 +1140,7 @@ bpf_object__create_maps(struct bpf_object *obj) *pfd = bpf_create_map_xattr(&create_attr); if (*pfd < 0 && create_attr.btf_key_type_id) { - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("Error in bpf_create_map_xattr(%s):%s(%d). Retrying without BTF.\n", map->name, cp, errno); create_attr.btf_fd = 0; @@ -1155,7 +1155,7 @@ bpf_object__create_maps(struct bpf_object *obj) size_t j; err = *pfd; - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("failed to create map (name: '%s'): %s\n", map->name, cp); for (j = 0; j < i; j++) @@ -1339,7 +1339,7 @@ load_program(enum bpf_prog_type type, enum bpf_attach_type expected_attach_type, } ret = -LIBBPF_ERRNO__LOAD; - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("load bpf program failed: %s\n", cp); if (log_buf && log_buf[0] != '\0') { @@ -1654,7 +1654,7 @@ static int check_path(const char *path) dir = dirname(dname); if (statfs(dir, &st_fs)) { - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("failed to statfs %s: %s\n", dir, cp); err = -errno; } @@ -1690,7 +1690,7 @@ int bpf_program__pin_instance(struct bpf_program *prog, const char *path, } if (bpf_obj_pin(prog->instances.fds[instance], path)) { - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("failed to pin program: %s\n", cp); return -errno; } @@ -1708,7 +1708,7 @@ static int make_dir(const char *path) err = -errno; if (err) { - cp = strerror_r(-err, errmsg, sizeof(errmsg)); + cp = str_error(-err, errmsg, sizeof(errmsg)); pr_warning("failed to mkdir %s: %s\n", path, cp); } return err; @@ -1770,7 +1770,7 @@ int bpf_map__pin(struct bpf_map *map, const char *path) } if (bpf_obj_pin(map->fd, path)) { - cp = strerror_r(errno, errmsg, sizeof(errmsg)); + cp = str_error(errno, errmsg, sizeof(errmsg)); pr_warning("failed to pin map: %s\n", cp); return -errno; } diff --git a/tools/lib/bpf/str_error.c b/tools/lib/bpf/str_error.c new file mode 100644 index 000000000000..b8798114a357 --- /dev/null +++ b/tools/lib/bpf/str_error.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: LGPL-2.1 +#undef _GNU_SOURCE +#include +#include +#include "str_error.h" + +/* + * Wrapper to allow for building in non-GNU systems such as Alpine Linux's musl + * libc, while checking strerror_r() return to avoid having to check this in + * all places calling it. + */ +char *str_error(int err, char *dst, int len) +{ + int ret = strerror_r(err, dst, len); + if (ret) + snprintf(dst, len, "ERROR: strerror_r(%d)=%d", err, ret); + return dst; +} diff --git a/tools/lib/bpf/str_error.h b/tools/lib/bpf/str_error.h new file mode 100644 index 000000000000..355b1db571d1 --- /dev/null +++ b/tools/lib/bpf/str_error.h @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: LGPL-2.1 +#ifndef BPF_STR_ERROR +#define BPF_STR_ERROR + +char *str_error(int err, char *dst, int len); +#endif // BPF_STR_ERROR -- cgit v1.2.3-59-g8ed1b From 169e366c08084aeb49a3793c892c9abfaa47eeda Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sun, 16 Sep 2018 16:17:05 +0100 Subject: perf Documentation: Fix out-of-tree asciidoctor man page generation The dependency for the man page rule using asciidoctor incorrectly specifies a source file in $(OUTPUT). When building out-of-tree, the source file is not found, resulting in a fall-back to the following rule which uses xmlto. Signed-off-by: Ben Hutchings Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk Fixes: ffef80ecf89f ("perf Documentation: Support for asciidoctor") Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile index 42261a9b280e..ac841bc5c35b 100644 --- a/tools/perf/Documentation/Makefile +++ b/tools/perf/Documentation/Makefile @@ -280,7 +280,7 @@ $(MAN_HTML): $(OUTPUT)%.html : %.txt mv $@+ $@ ifdef USE_ASCIIDOCTOR -$(OUTPUT)%.1 $(OUTPUT)%.5 $(OUTPUT)%.7 : $(OUTPUT)%.txt +$(OUTPUT)%.1 $(OUTPUT)%.5 $(OUTPUT)%.7 : %.txt $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \ $(ASCIIDOC) -b manpage -d manpage \ $(ASCIIDOC_EXTRA) -aperf_version=$(PERF_VERSION) -o $@+ $< && \ -- cgit v1.2.3-59-g8ed1b From e0bf2d4982fe7d9ddaf550dd023803ea286f47fc Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sun, 26 Aug 2018 19:49:32 +0200 Subject: serial: mvebu-uart: Fix reporting of effective CSIZE to userspace Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by: Jan Kiszka Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable # 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mvebu-uart.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index d04b5eeea3c6..170e446a2f62 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -511,6 +511,7 @@ static void mvebu_uart_set_termios(struct uart_port *port, termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR); termios->c_cflag &= CREAD | CBAUD; termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD); + termios->c_cflag |= CS8; } spin_unlock_irqrestore(&port->lock, flags); -- cgit v1.2.3-59-g8ed1b From 3216c622a24b0ebb9c159a8d1daf7f17a106b3f5 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 28 Aug 2018 12:44:24 +0200 Subject: tty: serial: lpuart: avoid leaking struct tty_struct The function tty_port_tty_get() gets a reference to the tty. Since the code is not using tty_port_tty_set(), the reference is kept even after closing the tty. Avoid using tty_port_tty_get() by directly access the tty instance. Since lpuart_start_rx_dma() is called from the .startup() and .set_termios() callback, it is safe to assume the tty instance is valid. Cc: stable@vger.kernel.org # v4.9+ Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Stefan Agner Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 51e47a63d61a..3f8d1274fc85 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -979,7 +979,8 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) struct circ_buf *ring = &sport->rx_ring; int ret, nent; int bits, baud; - struct tty_struct *tty = tty_port_tty_get(&sport->port.state->port); + struct tty_port *port = &sport->port.state->port; + struct tty_struct *tty = port->tty; struct ktermios *termios = &tty->termios; baud = tty_get_baud_rate(tty); -- cgit v1.2.3-59-g8ed1b From be28c1e3ca29887e207f0cbcd294cefe5074bab6 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 14 Sep 2018 10:32:50 +0000 Subject: serial: cpm_uart: return immediately from console poll kgdb expects poll function to return immediately and returning NO_POLL_CHAR when no character is available. Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll") Cc: Jason Wessel Cc: Signed-off-by: Christophe Leroy Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/cpm_uart/cpm_uart_core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 24a5f05e769b..e5389591bb4f 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -1054,8 +1054,8 @@ static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) /* Get the address of the host memory buffer. */ bdp = pinfo->rx_cur; - while (bdp->cbd_sc & BD_SC_EMPTY) - ; + if (bdp->cbd_sc & BD_SC_EMPTY) + return NO_POLL_CHAR; /* If the buffer address is in the CPM DPRAM, don't * convert it. @@ -1090,7 +1090,11 @@ static int cpm_get_poll_char(struct uart_port *port) poll_chars = 0; } if (poll_chars <= 0) { - poll_chars = poll_wait_key(poll_buf, pinfo); + int ret = poll_wait_key(poll_buf, pinfo); + + if (ret == NO_POLL_CHAR) + return ret; + poll_chars = ret; pollp = poll_buf; } poll_chars--; -- cgit v1.2.3-59-g8ed1b From fe32416790093b31364c08395727de17ec96ace1 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Tue, 18 Sep 2018 00:52:52 +0100 Subject: tty: Drop tty->count on tty_reopen() failure In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman Cc: Jiri Slaby Reviewed-by: Jiri Slaby Tested-by: Jiri Slaby Tested-by: Mark Rutland Tested-by: Tetsuo Handa Signed-off-by: Dmitry Safonov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 32bc3e3fe4d3..5e5da9acaf0a 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1255,6 +1255,7 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct * static int tty_reopen(struct tty_struct *tty) { struct tty_driver *driver = tty->driver; + int retval; if (driver->type == TTY_DRIVER_TYPE_PTY && driver->subtype == PTY_TYPE_MASTER) @@ -1268,10 +1269,14 @@ static int tty_reopen(struct tty_struct *tty) tty->count++; - if (!tty->ldisc) - return tty_ldisc_reinit(tty, tty->termios.c_line); + if (tty->ldisc) + return 0; - return 0; + retval = tty_ldisc_reinit(tty, tty->termios.c_line); + if (retval) + tty->count--; + + return retval; } /** -- cgit v1.2.3-59-g8ed1b From e97267cb4d1ee01ca0929638ec0fcbb0904f903d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 16 Aug 2018 15:30:38 -0500 Subject: tty: vt_ioctl: fix potential Spectre v1 vsa.console is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue 'vc_cons' [r] Fix this by sanitizing vsa.console before using it to index vc_cons Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt_ioctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index a78ad10a119b..73cdc0d633dd 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -700,6 +702,8 @@ int vt_ioctl(struct tty_struct *tty, if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES) ret = -ENXIO; else { + vsa.console = array_index_nospec(vsa.console, + MAX_NR_CONSOLES + 1); vsa.console--; console_lock(); ret = vc_allocate(vsa.console); -- cgit v1.2.3-59-g8ed1b From 8801922cd94c918e4dc3a108ecaa500c4d40583f Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 18 Sep 2018 16:10:47 +0300 Subject: intel_th: Fix device removal logic Commit a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") brings in new subdevice addition/removal logic that's broken for "host mode": the SWITCH device has no children to begin with, which is not handled in the code. This results in a null dereference bug later down the path. This patch fixes the subdevice removal code to handle host mode correctly. Signed-off-by: Alexander Shishkin Fixes: a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") CC: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c index da962aa2cef5..4e70ecee2103 100644 --- a/drivers/hwtracing/intel_th/core.c +++ b/drivers/hwtracing/intel_th/core.c @@ -139,7 +139,8 @@ static int intel_th_remove(struct device *dev) th->thdev[i] = NULL; } - th->num_thdevs = lowest; + if (lowest >= 0) + th->num_thdevs = lowest; } if (thdrv->attr_group) -- cgit v1.2.3-59-g8ed1b From ebe4582281d6e90972f057318a6edea14810ea48 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 18 Sep 2018 16:10:48 +0300 Subject: intel_th: Fix resource handling for ACPI glue layer The core of the driver expects the resource array from the glue layer to be indexed by even numbers, as is the case for 64-bit PCI resources. This doesn't hold true for others, ACPI in this instance, which leads to an out-of-bounds access and an ioremap() on whatever address that access fetches. This patch fixes the problem by reading resource array differently based on whether the 64-bit flag is set, which would indicate PCI glue layer. Signed-off-by: Alexander Shishkin Fixes: ebc57e399b8e ("intel_th: Add ACPI glue layer") CC: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/hwtracing/intel_th/core.c b/drivers/hwtracing/intel_th/core.c index 4e70ecee2103..fc6b7f8b62fb 100644 --- a/drivers/hwtracing/intel_th/core.c +++ b/drivers/hwtracing/intel_th/core.c @@ -488,7 +488,7 @@ static const struct intel_th_subdevice { .flags = IORESOURCE_MEM, }, { - .start = TH_MMIO_SW, + .start = 1, /* use resource[1] */ .end = 0, .flags = IORESOURCE_MEM, }, @@ -581,6 +581,7 @@ intel_th_subdevice_alloc(struct intel_th *th, struct intel_th_device *thdev; struct resource res[3]; unsigned int req = 0; + bool is64bit = false; int r, err; thdev = intel_th_device_alloc(th, subdev->type, subdev->name, @@ -590,12 +591,18 @@ intel_th_subdevice_alloc(struct intel_th *th, thdev->drvdata = th->drvdata; + for (r = 0; r < th->num_resources; r++) + if (th->resource[r].flags & IORESOURCE_MEM_64) { + is64bit = true; + break; + } + memcpy(res, subdev->res, sizeof(struct resource) * subdev->nres); for (r = 0; r < subdev->nres; r++) { struct resource *devres = th->resource; - int bar = TH_MMIO_CONFIG; + int bar = 0; /* cut subdevices' MMIO from resource[0] */ /* * Take .end == 0 to mean 'take the whole bar', @@ -604,6 +611,8 @@ intel_th_subdevice_alloc(struct intel_th *th, */ if (!res[r].end && res[r].flags == IORESOURCE_MEM) { bar = res[r].start; + if (is64bit) + bar *= 2; res[r].start = 0; res[r].end = resource_size(&devres[bar]) - 1; } -- cgit v1.2.3-59-g8ed1b From 59d08d00d43c644ee2011d7ff1807bdd69f31fe0 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Tue, 18 Sep 2018 16:10:49 +0300 Subject: intel_th: pci: Add Ice Lake PCH support This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH. Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/intel_th/pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c index c2e55e5d97f6..1cf6290d6435 100644 --- a/drivers/hwtracing/intel_th/pci.c +++ b/drivers/hwtracing/intel_th/pci.c @@ -160,6 +160,11 @@ static const struct pci_device_id intel_th_pci_id_table[] = { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x18e1), .driver_data = (kernel_ulong_t)&intel_th_2x, }, + { + /* Ice Lake PCH */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x34a6), + .driver_data = (kernel_ulong_t)&intel_th_2x, + }, { 0 }, }; -- cgit v1.2.3-59-g8ed1b From 753694a8df318f204a0ac1303de136def16f2e9c Mon Sep 17 00:00:00 2001 From: Xiaochen Shen Date: Sat, 15 Sep 2018 14:58:19 -0700 Subject: x86/intel_rdt: Fix data type in parsing callbacks Each resource is associated with a parsing callback to parse the data provided from user space when writing schemata file. The 'data' parameter in the callbacks is defined as a void pointer which is error prone due to lack of type check. parse_bw() processes the 'data' parameter as a string while its caller actually passes the parameter as a pointer to struct rdt_cbm_parse_data. Thus, parse_bw() takes wrong data and causes failure of parsing MBA throttle value. To fix the issue, the 'data' parameter in all parsing callbacks is defined and handled as a pointer to struct rdt_parse_data (renamed from struct rdt_cbm_parse_data). Fixes: 7604df6e16ae ("x86/intel_rdt: Support flexible data to parsing callbacks") Fixes: 9ab9aa15c309 ("x86/intel_rdt: Ensure requested schemata respects mode") Signed-off-by: Xiaochen Shen Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-2-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt.h | 16 ++++++++++++---- arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c | 21 ++++++++------------- 2 files changed, 20 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_rdt.h b/arch/x86/kernel/cpu/intel_rdt.h index 4e588f36228f..78266c798280 100644 --- a/arch/x86/kernel/cpu/intel_rdt.h +++ b/arch/x86/kernel/cpu/intel_rdt.h @@ -382,6 +382,11 @@ static inline bool is_mbm_event(int e) e <= QOS_L3_MBM_LOCAL_EVENT_ID); } +struct rdt_parse_data { + struct rdtgroup *rdtgrp; + char *buf; +}; + /** * struct rdt_resource - attributes of an RDT resource * @rid: The index of the resource @@ -423,16 +428,19 @@ struct rdt_resource { struct rdt_cache cache; struct rdt_membw membw; const char *format_str; - int (*parse_ctrlval) (void *data, struct rdt_resource *r, - struct rdt_domain *d); + int (*parse_ctrlval)(struct rdt_parse_data *data, + struct rdt_resource *r, + struct rdt_domain *d); struct list_head evt_list; int num_rmid; unsigned int mon_scale; unsigned long fflags; }; -int parse_cbm(void *_data, struct rdt_resource *r, struct rdt_domain *d); -int parse_bw(void *_buf, struct rdt_resource *r, struct rdt_domain *d); +int parse_cbm(struct rdt_parse_data *data, struct rdt_resource *r, + struct rdt_domain *d); +int parse_bw(struct rdt_parse_data *data, struct rdt_resource *r, + struct rdt_domain *d); extern struct mutex rdtgroup_mutex; diff --git a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c index af358ca05160..edd5761f7336 100644 --- a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c +++ b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c @@ -64,19 +64,19 @@ static bool bw_validate(char *buf, unsigned long *data, struct rdt_resource *r) return true; } -int parse_bw(void *_buf, struct rdt_resource *r, struct rdt_domain *d) +int parse_bw(struct rdt_parse_data *data, struct rdt_resource *r, + struct rdt_domain *d) { - unsigned long data; - char *buf = _buf; + unsigned long bw_val; if (d->have_new_ctrl) { rdt_last_cmd_printf("duplicate domain %d\n", d->id); return -EINVAL; } - if (!bw_validate(buf, &data, r)) + if (!bw_validate(data->buf, &bw_val, r)) return -EINVAL; - d->new_ctrl = data; + d->new_ctrl = bw_val; d->have_new_ctrl = true; return 0; @@ -123,18 +123,13 @@ static bool cbm_validate(char *buf, u32 *data, struct rdt_resource *r) return true; } -struct rdt_cbm_parse_data { - struct rdtgroup *rdtgrp; - char *buf; -}; - /* * Read one cache bit mask (hex). Check that it is valid for the current * resource type. */ -int parse_cbm(void *_data, struct rdt_resource *r, struct rdt_domain *d) +int parse_cbm(struct rdt_parse_data *data, struct rdt_resource *r, + struct rdt_domain *d) { - struct rdt_cbm_parse_data *data = _data; struct rdtgroup *rdtgrp = data->rdtgrp; u32 cbm_val; @@ -195,7 +190,7 @@ int parse_cbm(void *_data, struct rdt_resource *r, struct rdt_domain *d) static int parse_line(char *line, struct rdt_resource *r, struct rdtgroup *rdtgrp) { - struct rdt_cbm_parse_data data; + struct rdt_parse_data data; char *dom = NULL, *id; struct rdt_domain *d; unsigned long dom_id; -- cgit v1.2.3-59-g8ed1b From f968dc119a159a95628a20de2a2dcc913d0a82d7 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:20 -0700 Subject: x86/intel_rdt: Fix size reporting of MBA resource Chen Yu reported a divide-by-zero error when accessing the 'size' resctrl file when a MBA resource is enabled. divide error: 0000 [#1] SMP PTI CPU: 93 PID: 1929 Comm: cat Not tainted 4.19.0-rc2-debug-rdt+ #25 RIP: 0010:rdtgroup_cbm_to_size+0x7e/0xa0 Call Trace: rdtgroup_size_show+0x11a/0x1d0 seq_read+0xd8/0x3b0 Quoting Chen Yu's report: This is because for MB resource, the r->cache.cbm_len is zero, thus calculating size in rdtgroup_cbm_to_size() will trigger the exception. Fix this issue in the 'size' file by getting correct memory bandwidth value which is in MBps when MBA software controller is enabled or in percentage when MBA software controller is disabled. Fixes: d9b48c86eb38 ("x86/intel_rdt: Display resource groups' allocations in bytes") Reported-by: Chen Yu Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Tested-by: Chen Yu Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Link: https://lkml.kernel.org/r/20180904174614.26682-1-yu.c.chen@intel.com Link: https://lkml.kernel.org/r/1537048707-76280-3-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index b799c00bef09..32e8bbdf2400 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -1155,8 +1155,8 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, struct rdt_resource *r; struct rdt_domain *d; unsigned int size; - bool sep = false; - u32 cbm; + bool sep; + u32 ctrl; rdtgrp = rdtgroup_kn_lock_live(of->kn); if (!rdtgrp) { @@ -1174,6 +1174,7 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, } for_each_alloc_enabled_rdt_resource(r) { + sep = false; seq_printf(s, "%*s:", max_name_width, r->name); list_for_each_entry(d, &r->domains, list) { if (sep) @@ -1181,8 +1182,13 @@ static int rdtgroup_size_show(struct kernfs_open_file *of, if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP) { size = 0; } else { - cbm = d->ctrl_val[rdtgrp->closid]; - size = rdtgroup_cbm_to_size(r, d, cbm); + ctrl = (!is_mba_sc(r) ? + d->ctrl_val[rdtgrp->closid] : + d->mbps_val[rdtgrp->closid]); + if (r->rid == RDT_RESOURCE_MBA) + size = ctrl; + else + size = rdtgroup_cbm_to_size(r, d, ctrl); } seq_printf(s, "%d=%u", d->id, size); sep = true; -- cgit v1.2.3-59-g8ed1b From c793da8e4c62d2c002a79c47f44efead450cbcae Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:21 -0700 Subject: x86/intel_rdt: Global closid helper to support future fixes The number of CLOSIDs supported by a system is the minimum number of CLOSIDs supported by any of its resources. Care should be taken when iterating over the CLOSIDs of a resource since it may be that the number of CLOSIDs supported on the system is less than the number of CLOSIDs supported by the resource. Introduce a helper function that can be used to query the number of CLOSIDs that is supported by all resources, irrespective of how many CLOSIDs are supported by a particular resource. Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-4-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt.h | 1 + arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/x86/kernel/cpu/intel_rdt.h b/arch/x86/kernel/cpu/intel_rdt.h index 78266c798280..285eb3ec4200 100644 --- a/arch/x86/kernel/cpu/intel_rdt.h +++ b/arch/x86/kernel/cpu/intel_rdt.h @@ -544,6 +544,7 @@ int rdtgroup_pseudo_lock_create(struct rdtgroup *rdtgrp); void rdtgroup_pseudo_lock_remove(struct rdtgroup *rdtgrp); struct rdt_domain *get_domain_from_cpu(int cpu, struct rdt_resource *r); int update_domains(struct rdt_resource *r, int closid); +int closids_supported(void); void closid_free(int closid); int alloc_rmid(void); void free_rmid(u32 rmid); diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 32e8bbdf2400..b372923eb209 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -97,6 +97,12 @@ void rdt_last_cmd_printf(const char *fmt, ...) * limited as the number of resources grows. */ static int closid_free_map; +static int closid_free_map_len; + +int closids_supported(void) +{ + return closid_free_map_len; +} static void closid_init(void) { @@ -111,6 +117,7 @@ static void closid_init(void) /* CLOSID 0 is always reserved for the default group */ closid_free_map &= ~1; + closid_free_map_len = rdt_min_closid; } static int closid_alloc(void) -- cgit v1.2.3-59-g8ed1b From 47d53b184aee983ab9492503da11b0a81b19145b Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:22 -0700 Subject: x86/intel_rdt: Fix invalid mode warning when multiple resources are managed When multiple resources are managed by RDT, the number of CLOSIDs used is the minimum of the CLOSIDs supported by each resource. In the function rdt_bit_usage_show(), the annotated bitmask is created to depict how the CAT supporting caches are being used. During this annotated bitmask creation, each resource group is queried for its mode that is used as a label in the annotated bitmask. The maximum number of resource groups is currently assumed to be the number of CLOSIDs supported by the resource for which the information is being displayed. This is incorrect since the number of active CLOSIDs is the minimum across all resources. If information for a cache instance with more CLOSIDs than another is being generated we thus encounter a warning like: invalid mode for closid 8 WARNING: CPU: 88 PID: 1791 at [SNIP]/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c :827 rdt_bit_usage_show+0x221/0x2b0 Fix this by ensuring that only the number of supported CLOSIDs are considered. Fixes: e651901187ab8 ("x86/intel_rdt: Introduce "bit_usage" to display cache allocations details") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-5-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index b372923eb209..ea91750ba27f 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -809,7 +809,7 @@ static int rdt_bit_usage_show(struct kernfs_open_file *of, sw_shareable = 0; exclusive = 0; seq_printf(seq, "%d=", dom->id); - for (i = 0; i < r->num_closid; i++, ctrl++) { + for (i = 0; i < closids_supported(); i++, ctrl++) { if (!closid_allocated(i)) continue; mode = rdtgroup_mode_by_closid(i); -- cgit v1.2.3-59-g8ed1b From 70479c012b67b89e219c40eddc5dc338b7c447a3 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:23 -0700 Subject: x86/intel_rdt: Fix unchecked MSR access When a new resource group is created, it is initialized with sane defaults that currently assume the resource being initialized is a CAT resource. This code path is also followed by a MBA resource that is not allocated the same as a CAT resource and as a result we encounter the following unchecked MSR access error: unchecked MSR access error: WRMSR to 0xd51 (tried to write 0x0000 000000000064) at rIP: 0xffffffffae059994 (native_write_msr+0x4/0x20) Call Trace: mba_wrmsr+0x41/0x80 update_domains+0x125/0x130 rdtgroup_mkdir+0x270/0x500 Fix the above by ensuring the initial allocation is only attempted on a CAT resource. Fixes: 95f0b77ef ("x86/intel_rdt: Initialize new resource group with sane defaults") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-6-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index ea91750ba27f..74821bc457c0 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -2349,6 +2349,12 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) u32 *ctrl; for_each_alloc_enabled_rdt_resource(r) { + /* + * Only initialize default allocations for CBM cache + * resources + */ + if (r->rid == RDT_RESOURCE_MBA) + continue; list_for_each_entry(d, &r->domains, list) { d->have_new_ctrl = false; d->new_ctrl = r->cache.shareable_bits; @@ -2386,6 +2392,12 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) } for_each_alloc_enabled_rdt_resource(r) { + /* + * Only initialize default allocations for CBM cache + * resources + */ + if (r->rid == RDT_RESOURCE_MBA) + continue; ret = update_domains(r, rdtgrp->closid); if (ret < 0) { rdt_last_cmd_puts("failed to initialize allocations\n"); -- cgit v1.2.3-59-g8ed1b From 32d736abed4febff4b6bf85d5d240ee24d254322 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:24 -0700 Subject: x86/intel_rdt: Do not allow pseudo-locking of MBA resource A system supporting pseudo-locking may have MBA as well as CAT resources of which only the CAT resources could support cache pseudo-locking. When the schemata to be pseudo-locked is provided it should be checked that that schemata does not attempt to pseudo-lock a MBA resource. Fixes: e0bdfe8e3 ("x86/intel_rdt: Support creation/removal of pseudo-locked region") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-7-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c index edd5761f7336..0f53049719cd 100644 --- a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c +++ b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c @@ -195,6 +195,12 @@ static int parse_line(char *line, struct rdt_resource *r, struct rdt_domain *d; unsigned long dom_id; + if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP && + r->rid == RDT_RESOURCE_MBA) { + rdt_last_cmd_puts("Cannot pseudo-lock MBA resource\n"); + return -EINVAL; + } + next: if (!line || line[0] == '\0') return 0; -- cgit v1.2.3-59-g8ed1b From f0df4e1acf3d721958dcafb2c9c0bdf25189068d Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:25 -0700 Subject: x86/intel_rdt: Fix incorrect loop end condition A loop is used to check if a CAT resource's CBM of one CLOSID overlaps with the CBM of another CLOSID of the same resource. The loop is run over all CLOSIDs supported by the resource. The problem with running the loop over all CLOSIDs supported by the resource is that its number of supported CLOSIDs may be more than the number of supported CLOSIDs on the system, which is the minimum number of CLOSIDs supported across all resources. Fix the loop to only consider the number of system supported CLOSIDs, not all that are supported by the resource. Fixes: 49f7b4efa ("x86/intel_rdt: Enable setting of exclusive mode") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-8-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 74821bc457c0..afd93d45e21b 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -996,7 +996,7 @@ bool rdtgroup_cbm_overlaps(struct rdt_resource *r, struct rdt_domain *d, /* Check for overlap with other resource groups */ ctrl = d->ctrl_val; - for (i = 0; i < r->num_closid; i++, ctrl++) { + for (i = 0; i < closids_supported(); i++, ctrl++) { ctrl_b = (unsigned long *)ctrl; mode = rdtgroup_mode_by_closid(i); if (closid_allocated(i) && i != closid && -- cgit v1.2.3-59-g8ed1b From 939b90b20bc87e199b6b53942764b987289b87ce Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:26 -0700 Subject: x86/intel_rdt: Fix exclusive mode handling of MBA resource It is possible for a resource group to consist out of MBA as well as CAT/CDP resources. The "exclusive" resource mode only applies to the CAT/CDP resources since MBA allocations cannot be specified to overlap or not. When a user requests a resource group to become "exclusive" then it can only be successful if there are CAT/CDP resources in the group and none of their CBMs associated with the group's CLOSID overlaps with any other resource group. Fix the "exclusive" mode setting by failing if there isn't any CAT/CDP resource in the group and ensuring that the CBM checking is only done on CAT/CDP resources. Fixes: 49f7b4efa ("x86/intel_rdt: Enable setting of exclusive mode") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-9-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index afd93d45e21b..f3231f78d69b 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -1031,16 +1031,27 @@ static bool rdtgroup_mode_test_exclusive(struct rdtgroup *rdtgrp) { int closid = rdtgrp->closid; struct rdt_resource *r; + bool has_cache = false; struct rdt_domain *d; for_each_alloc_enabled_rdt_resource(r) { + if (r->rid == RDT_RESOURCE_MBA) + continue; + has_cache = true; list_for_each_entry(d, &r->domains, list) { if (rdtgroup_cbm_overlaps(r, d, d->ctrl_val[closid], - rdtgrp->closid, false)) + rdtgrp->closid, false)) { + rdt_last_cmd_puts("schemata overlaps\n"); return false; + } } } + if (!has_cache) { + rdt_last_cmd_puts("cannot be exclusive without CAT/CDP\n"); + return false; + } + return true; } @@ -1092,7 +1103,6 @@ static ssize_t rdtgroup_mode_write(struct kernfs_open_file *of, rdtgrp->mode = RDT_MODE_SHAREABLE; } else if (!strcmp(buf, "exclusive")) { if (!rdtgroup_mode_test_exclusive(rdtgrp)) { - rdt_last_cmd_printf("schemata overlaps\n"); ret = -EINVAL; goto out; } -- cgit v1.2.3-59-g8ed1b From ffb2315fd22c2568747402eecdc581a245a2f5ba Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Sat, 15 Sep 2018 14:58:27 -0700 Subject: x86/intel_rdt: Fix incorrect loop end condition In order to determine a sane default cache allocation for a new CAT/CDP resource group, all resource groups are checked to determine which cache portions are available to share. At this time all possible CLOSIDs that can be supported by the resource is checked. This is problematic if the resource supports more CLOSIDs than another CAT/CDP resource. In this case, the number of CLOSIDs that could be allocated are fewer than the number of CLOSIDs that can be supported by the resource. Limit the check of closids to that what is supported by the system based on the minimum across all resources. Fixes: 95f0b77ef ("x86/intel_rdt: Initialize new resource group with sane defaults") Signed-off-by: Reinette Chatre Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Cc: "H Peter Anvin" Cc: "Tony Luck" Cc: "Xiaochen Shen" Cc: "Chen Yu" Link: https://lkml.kernel.org/r/1537048707-76280-10-git-send-email-fenghua.yu@intel.com --- arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index f3231f78d69b..1b8e86a5d5e1 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -2370,7 +2370,7 @@ static int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) d->new_ctrl = r->cache.shareable_bits; used_b = r->cache.shareable_bits; ctrl = d->ctrl_val; - for (i = 0; i < r->num_closid; i++, ctrl++) { + for (i = 0; i < closids_supported(); i++, ctrl++) { if (closid_allocated(i) && i != closid) { mode = rdtgroup_mode_by_closid(i); if (mode == RDT_MODE_PSEUDO_LOCKSETUP) -- cgit v1.2.3-59-g8ed1b From 235fe0851bcf1d6ffd6cef4c7eb0d701d0946053 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 12 Sep 2018 11:55:26 -0500 Subject: MAINTAINERS: Update PPC contacts for PCI core error handling The original PCI error recovery functionality was for the powerpc-specific IBM EEH feature. PCIe subsequently added some similar features, including AER and DPC, that can be used on any architecture. We want the generic PCI core error handling support to work with all of these features. Driver error recovery callbacks should be independent of which feature the platform provides. Add the generic PCI core error recovery files to the powerpc EEH MAINTAINERS entry so the powerpc folks will be copied on changes to the generic PCI error handling strategy. Add Sam and Oliver as maintainers for this area. Signed-off-by: Bjorn Helgaas Acked-by: Russell Currey Acked-by: Sam Bobroff --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4ece30f15777..f05d2e9ffc84 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11203,8 +11203,14 @@ F: tools/pci/ PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC M: Russell Currey +M: Sam Bobroff +M: Oliver O'Halloran L: linuxppc-dev@lists.ozlabs.org S: Supported +F: Documentation/PCI/pci-error-recovery.txt +F: drivers/pci/pcie/aer.c +F: drivers/pci/pcie/dpc.c +F: drivers/pci/pcie/err.c F: Documentation/powerpc/eeh-pci-error-recovery.txt F: arch/powerpc/kernel/eeh*.c F: arch/powerpc/platforms/*/eeh*.c -- cgit v1.2.3-59-g8ed1b From b8a946d8dc245ec3adae65c8eab6f3e73a950af3 Mon Sep 17 00:00:00 2001 From: Song Qiang Date: Mon, 17 Sep 2018 11:08:01 -0700 Subject: Input: gpio-keys - fix a documentation index issue gpio_keys.c now exists in the drivers/input/keyboard/ rather than drivers/input/. Signed-off-by: Song Qiang Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/gpio-keys.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 996ce84352cb..7cccc49b6bea 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -1,4 +1,4 @@ -Device-Tree bindings for input/gpio_keys.c keyboard driver +Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver Required properties: - compatible = "gpio-keys"; -- cgit v1.2.3-59-g8ed1b From 49f62249a9577b0f8c20c7c843d23289d143daf1 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 17 Sep 2018 11:08:52 -0700 Subject: Input: egalax_ts - add system wakeup support This patch adds wakeup function support for egalax touch screen, if "wakeup-source" is added to device tree's egalax touch screen node, the wakeup function will be enabled, and egalax touch screen will be able to wakeup system from suspend. Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/egalax_ts.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index 80e69bb8283e..83ac8c128192 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -241,6 +241,9 @@ static int __maybe_unused egalax_ts_suspend(struct device *dev) struct i2c_client *client = to_i2c_client(dev); int ret; + if (device_may_wakeup(dev)) + return enable_irq_wake(client->irq); + ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); return ret > 0 ? 0 : ret; } @@ -249,6 +252,9 @@ static int __maybe_unused egalax_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + if (device_may_wakeup(dev)) + return disable_irq_wake(client->irq); + return egalax_wake_up_device(client); } -- cgit v1.2.3-59-g8ed1b From 9e62df51be993035c577371ffee5477697a56aad Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 17 Sep 2018 12:43:34 -0700 Subject: Input: atakbd - fix Atari keymap Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab , keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atakbd.c | 64 +++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 38 deletions(-) diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c index 6f62da2909ec..e989574a2e20 100644 --- a/drivers/input/keyboard/atakbd.c +++ b/drivers/input/keyboard/atakbd.c @@ -75,8 +75,7 @@ MODULE_LICENSE("GPL"); */ -static unsigned char atakbd_keycode[0x72] = { /* American layout */ - [0] = KEY_GRAVE, +static unsigned char atakbd_keycode[0x73] = { /* American layout */ [1] = KEY_ESC, [2] = KEY_1, [3] = KEY_2, @@ -117,9 +116,9 @@ static unsigned char atakbd_keycode[0x72] = { /* American layout */ [38] = KEY_L, [39] = KEY_SEMICOLON, [40] = KEY_APOSTROPHE, - [41] = KEY_BACKSLASH, /* FIXME, '#' */ + [41] = KEY_GRAVE, [42] = KEY_LEFTSHIFT, - [43] = KEY_GRAVE, /* FIXME: '~' */ + [43] = KEY_BACKSLASH, [44] = KEY_Z, [45] = KEY_X, [46] = KEY_C, @@ -145,45 +144,34 @@ static unsigned char atakbd_keycode[0x72] = { /* American layout */ [66] = KEY_F8, [67] = KEY_F9, [68] = KEY_F10, - [69] = KEY_ESC, - [70] = KEY_DELETE, - [71] = KEY_KP7, - [72] = KEY_KP8, - [73] = KEY_KP9, + [71] = KEY_HOME, + [72] = KEY_UP, [74] = KEY_KPMINUS, - [75] = KEY_KP4, - [76] = KEY_KP5, - [77] = KEY_KP6, + [75] = KEY_LEFT, + [77] = KEY_RIGHT, [78] = KEY_KPPLUS, - [79] = KEY_KP1, - [80] = KEY_KP2, - [81] = KEY_KP3, - [82] = KEY_KP0, - [83] = KEY_KPDOT, - [90] = KEY_KPLEFTPAREN, - [91] = KEY_KPRIGHTPAREN, - [92] = KEY_KPASTERISK, /* FIXME */ - [93] = KEY_KPASTERISK, - [94] = KEY_KPPLUS, - [95] = KEY_HELP, + [80] = KEY_DOWN, + [82] = KEY_INSERT, + [83] = KEY_DELETE, [96] = KEY_102ND, - [97] = KEY_KPASTERISK, /* FIXME */ - [98] = KEY_KPSLASH, + [97] = KEY_UNDO, + [98] = KEY_HELP, [99] = KEY_KPLEFTPAREN, [100] = KEY_KPRIGHTPAREN, [101] = KEY_KPSLASH, [102] = KEY_KPASTERISK, - [103] = KEY_UP, - [104] = KEY_KPASTERISK, /* FIXME */ - [105] = KEY_LEFT, - [106] = KEY_RIGHT, - [107] = KEY_KPASTERISK, /* FIXME */ - [108] = KEY_DOWN, - [109] = KEY_KPASTERISK, /* FIXME */ - [110] = KEY_KPASTERISK, /* FIXME */ - [111] = KEY_KPASTERISK, /* FIXME */ - [112] = KEY_KPASTERISK, /* FIXME */ - [113] = KEY_KPASTERISK /* FIXME */ + [103] = KEY_KP7, + [104] = KEY_KP8, + [105] = KEY_KP9, + [106] = KEY_KP4, + [107] = KEY_KP5, + [108] = KEY_KP6, + [109] = KEY_KP1, + [110] = KEY_KP2, + [111] = KEY_KP3, + [112] = KEY_KP0, + [113] = KEY_KPDOT, + [114] = KEY_KPENTER, }; static struct input_dev *atakbd_dev; @@ -191,7 +179,7 @@ static struct input_dev *atakbd_dev; static void atakbd_interrupt(unsigned char scancode, char down) { - if (scancode < 0x72) { /* scancodes < 0xf2 are keys */ + if (scancode < 0x73) { /* scancodes < 0xf3 are keys */ // report raw events here? @@ -205,7 +193,7 @@ static void atakbd_interrupt(unsigned char scancode, char down) input_report_key(atakbd_dev, scancode, down); input_sync(atakbd_dev); } - } else /* scancodes >= 0xf2 are mouse data, most likely */ + } else /* scancodes >= 0xf3 are mouse data, most likely */ printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); return; -- cgit v1.2.3-59-g8ed1b From 52d2c7bf7c90217fbe875d2d76f310979c48eb83 Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Mon, 17 Sep 2018 15:27:49 -0700 Subject: Input: atakbd - fix Atari CapsLock behaviour The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Andreas Schwab Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atakbd.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c index e989574a2e20..6caee807cafa 100644 --- a/drivers/input/keyboard/atakbd.c +++ b/drivers/input/keyboard/atakbd.c @@ -185,14 +185,8 @@ static void atakbd_interrupt(unsigned char scancode, char down) scancode = atakbd_keycode[scancode]; - if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */ - input_report_key(atakbd_dev, scancode, 1); - input_report_key(atakbd_dev, scancode, 0); - input_sync(atakbd_dev); - } else { - input_report_key(atakbd_dev, scancode, down); - input_sync(atakbd_dev); - } + input_report_key(atakbd_dev, scancode, down); + input_sync(atakbd_dev); } else /* scancodes >= 0xf3 are mouse data, most likely */ printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode); -- cgit v1.2.3-59-g8ed1b From 91a97507323e1ad4bfc10f4a5922e67cdaf8b3cd Mon Sep 17 00:00:00 2001 From: Aaron Ma Date: Tue, 18 Sep 2018 09:32:22 -0700 Subject: Input: elantech - enable middle button of touchpad on ThinkPad P72 Adding 2 new touchpad IDs to support middle button support. Cc: stable@vger.kernel.org Signed-off-by: Aaron Ma Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 44f57cf6675b..2d95e8d93cc7 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1178,6 +1178,8 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = { static const char * const middle_button_pnp_ids[] = { "LEN2131", /* ThinkPad P52 w/ NFC */ "LEN2132", /* ThinkPad P52 */ + "LEN2133", /* ThinkPad P72 w/ NFC */ + "LEN2134", /* ThinkPad P72 */ NULL }; -- cgit v1.2.3-59-g8ed1b From 4fef1250eafddc5182cd5c3c354a6971bcf7520d Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Tue, 18 Sep 2018 09:53:32 -0700 Subject: Input: uinput - allow for max == min during input_absinfo validation These values are inclusive, so a range of 1 requires min == max. Signed-off-by: Peter Hutterer Reviewed-by: Martin Kepplinger Signed-off-by: Dmitry Torokhov --- drivers/input/misc/uinput.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 96a887f33698..eb14ddf69346 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -410,7 +410,7 @@ static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code, min = abs->minimum; max = abs->maximum; - if ((min != 0 || max != 0) && max <= min) { + if ((min != 0 || max != 0) && max < min) { printk(KERN_DEBUG "%s: invalid abs[%02x] min:%d max:%d\n", UINPUT_NAME, code, min, max); -- cgit v1.2.3-59-g8ed1b From 8e2aac333785f91ff74e219a1e78e6bdc1ef2c41 Mon Sep 17 00:00:00 2001 From: Simon Detheridge Date: Sat, 15 Sep 2018 22:15:18 +0100 Subject: pinctrl: cannonlake: Fix gpio base for GPP-E The gpio base for GPP-E was set incorrectly to 258 instead of 256, preventing the touchpad working on my Tong Fang GK5CN5Z laptop. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=200787 Signed-off-by: Simon Detheridge Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cannonlake.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c index fb1afe55bf53..8d48371caaa2 100644 --- a/drivers/pinctrl/intel/pinctrl-cannonlake.c +++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c @@ -379,7 +379,7 @@ static const struct intel_padgroup cnlh_community1_gpps[] = { static const struct intel_padgroup cnlh_community3_gpps[] = { CNL_GPP(0, 155, 178, 192), /* GPP_K */ CNL_GPP(1, 179, 202, 224), /* GPP_H */ - CNL_GPP(2, 203, 215, 258), /* GPP_E */ + CNL_GPP(2, 203, 215, 256), /* GPP_E */ CNL_GPP(3, 216, 239, 288), /* GPP_F */ CNL_GPP(4, 240, 248, CNL_NO_GPIO), /* SPI */ }; -- cgit v1.2.3-59-g8ed1b From 8fce3331702316d4bcfeb0771c09ac75d2192bbc Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 17 Sep 2018 09:22:56 +0100 Subject: net: stmmac: Rework coalesce timer and fix multi-queue races This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli Cc: Neil Armstrong Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: David S. Miller Cc: Joao Pinto Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 4 +- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 14 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 233 ++++++++++++---------- include/linux/stmmac.h | 1 + 4 files changed, 146 insertions(+), 106 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 1854f270ad66..b1b305f8f414 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -258,10 +258,10 @@ struct stmmac_safety_stats { #define MAX_DMA_RIWT 0xff #define MIN_DMA_RIWT 0x20 /* Tx coalesce parameters */ -#define STMMAC_COAL_TX_TIMER 40000 +#define STMMAC_COAL_TX_TIMER 1000 #define STMMAC_MAX_COAL_TX_TICK 100000 #define STMMAC_TX_MAX_FRAMES 256 -#define STMMAC_TX_FRAMES 64 +#define STMMAC_TX_FRAMES 25 /* Packets types */ enum packets_types { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index c0a855b7ab3b..63e1064b27a2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -48,6 +48,8 @@ struct stmmac_tx_info { /* Frequently used values are kept adjacent for cache effect */ struct stmmac_tx_queue { + u32 tx_count_frames; + struct timer_list txtimer; u32 queue_index; struct stmmac_priv *priv_data; struct dma_extended_desc *dma_etx ____cacheline_aligned_in_smp; @@ -73,7 +75,14 @@ struct stmmac_rx_queue { u32 rx_zeroc_thresh; dma_addr_t dma_rx_phy; u32 rx_tail_addr; +}; + +struct stmmac_channel { struct napi_struct napi ____cacheline_aligned_in_smp; + struct stmmac_priv *priv_data; + u32 index; + int has_rx; + int has_tx; }; struct stmmac_tc_entry { @@ -109,14 +118,12 @@ struct stmmac_pps_cfg { struct stmmac_priv { /* Frequently used values are kept adjacent for cache effect */ - u32 tx_count_frames; u32 tx_coal_frames; u32 tx_coal_timer; int tx_coalesce; int hwts_tx_en; bool tx_path_in_lpi_mode; - struct timer_list txtimer; bool tso; unsigned int dma_buf_sz; @@ -137,6 +144,9 @@ struct stmmac_priv { /* TX Queue */ struct stmmac_tx_queue tx_queue[MTL_MAX_TX_QUEUES]; + /* Generic channel for NAPI */ + struct stmmac_channel channel[STMMAC_CH_MAX]; + bool oldlink; int speed; int oldduplex; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 9f458bb16f2a..ab9cc0143ff2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -148,12 +148,14 @@ static void stmmac_verify_args(void) static void stmmac_disable_all_queues(struct stmmac_priv *priv) { u32 rx_queues_cnt = priv->plat->rx_queues_to_use; + u32 tx_queues_cnt = priv->plat->tx_queues_to_use; + u32 maxq = max(rx_queues_cnt, tx_queues_cnt); u32 queue; - for (queue = 0; queue < rx_queues_cnt; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; + for (queue = 0; queue < maxq; queue++) { + struct stmmac_channel *ch = &priv->channel[queue]; - napi_disable(&rx_q->napi); + napi_disable(&ch->napi); } } @@ -164,12 +166,14 @@ static void stmmac_disable_all_queues(struct stmmac_priv *priv) static void stmmac_enable_all_queues(struct stmmac_priv *priv) { u32 rx_queues_cnt = priv->plat->rx_queues_to_use; + u32 tx_queues_cnt = priv->plat->tx_queues_to_use; + u32 maxq = max(rx_queues_cnt, tx_queues_cnt); u32 queue; - for (queue = 0; queue < rx_queues_cnt; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; + for (queue = 0; queue < maxq; queue++) { + struct stmmac_channel *ch = &priv->channel[queue]; - napi_enable(&rx_q->napi); + napi_enable(&ch->napi); } } @@ -1843,18 +1847,18 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) * @queue: TX queue index * Description: it reclaims the transmit resources after transmission completes. */ -static void stmmac_tx_clean(struct stmmac_priv *priv, u32 queue) +static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue) { struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue]; unsigned int bytes_compl = 0, pkts_compl = 0; - unsigned int entry; + unsigned int entry, count = 0; - netif_tx_lock(priv->dev); + __netif_tx_lock_bh(netdev_get_tx_queue(priv->dev, queue)); priv->xstats.tx_clean++; entry = tx_q->dirty_tx; - while (entry != tx_q->cur_tx) { + while ((entry != tx_q->cur_tx) && (count < budget)) { struct sk_buff *skb = tx_q->tx_skbuff[entry]; struct dma_desc *p; int status; @@ -1870,6 +1874,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv, u32 queue) if (unlikely(status & tx_dma_own)) break; + count++; + /* Make sure descriptor fields are read after reading * the own bit. */ @@ -1937,7 +1943,10 @@ static void stmmac_tx_clean(struct stmmac_priv *priv, u32 queue) stmmac_enable_eee_mode(priv); mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(eee_timer)); } - netif_tx_unlock(priv->dev); + + __netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue)); + + return count; } /** @@ -2020,6 +2029,33 @@ static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv) return false; } +static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan) +{ + int status = stmmac_dma_interrupt_status(priv, priv->ioaddr, + &priv->xstats, chan); + struct stmmac_channel *ch = &priv->channel[chan]; + bool needs_work = false; + + if ((status & handle_rx) && ch->has_rx) { + needs_work = true; + } else { + status &= ~handle_rx; + } + + if ((status & handle_tx) && ch->has_tx) { + needs_work = true; + } else { + status &= ~handle_tx; + } + + if (needs_work && napi_schedule_prep(&ch->napi)) { + stmmac_disable_dma_irq(priv, priv->ioaddr, chan); + __napi_schedule(&ch->napi); + } + + return status; +} + /** * stmmac_dma_interrupt - DMA ISR * @priv: driver private structure @@ -2034,57 +2070,14 @@ static void stmmac_dma_interrupt(struct stmmac_priv *priv) u32 channels_to_check = tx_channel_count > rx_channel_count ? tx_channel_count : rx_channel_count; u32 chan; - bool poll_scheduled = false; int status[max_t(u32, MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES)]; /* Make sure we never check beyond our status buffer. */ if (WARN_ON_ONCE(channels_to_check > ARRAY_SIZE(status))) channels_to_check = ARRAY_SIZE(status); - /* Each DMA channel can be used for rx and tx simultaneously, yet - * napi_struct is embedded in struct stmmac_rx_queue rather than in a - * stmmac_channel struct. - * Because of this, stmmac_poll currently checks (and possibly wakes) - * all tx queues rather than just a single tx queue. - */ for (chan = 0; chan < channels_to_check; chan++) - status[chan] = stmmac_dma_interrupt_status(priv, priv->ioaddr, - &priv->xstats, chan); - - for (chan = 0; chan < rx_channel_count; chan++) { - if (likely(status[chan] & handle_rx)) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[chan]; - - if (likely(napi_schedule_prep(&rx_q->napi))) { - stmmac_disable_dma_irq(priv, priv->ioaddr, chan); - __napi_schedule(&rx_q->napi); - poll_scheduled = true; - } - } - } - - /* If we scheduled poll, we already know that tx queues will be checked. - * If we didn't schedule poll, see if any DMA channel (used by tx) has a - * completed transmission, if so, call stmmac_poll (once). - */ - if (!poll_scheduled) { - for (chan = 0; chan < tx_channel_count; chan++) { - if (status[chan] & handle_tx) { - /* It doesn't matter what rx queue we choose - * here. We use 0 since it always exists. - */ - struct stmmac_rx_queue *rx_q = - &priv->rx_queue[0]; - - if (likely(napi_schedule_prep(&rx_q->napi))) { - stmmac_disable_dma_irq(priv, - priv->ioaddr, chan); - __napi_schedule(&rx_q->napi); - } - break; - } - } - } + status[chan] = stmmac_napi_check(priv, chan); for (chan = 0; chan < tx_channel_count; chan++) { if (unlikely(status[chan] & tx_hard_error_bump_tc)) { @@ -2233,6 +2226,13 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) return ret; } +static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue) +{ + struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue]; + + mod_timer(&tx_q->txtimer, STMMAC_COAL_TIMER(priv->tx_coal_timer)); +} + /** * stmmac_tx_timer - mitigation sw timer for tx. * @data: data pointer @@ -2241,13 +2241,14 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) */ static void stmmac_tx_timer(struct timer_list *t) { - struct stmmac_priv *priv = from_timer(priv, t, txtimer); - u32 tx_queues_count = priv->plat->tx_queues_to_use; - u32 queue; + struct stmmac_tx_queue *tx_q = from_timer(tx_q, t, txtimer); + struct stmmac_priv *priv = tx_q->priv_data; + struct stmmac_channel *ch; + + ch = &priv->channel[tx_q->queue_index]; - /* let's scan all the tx queues */ - for (queue = 0; queue < tx_queues_count; queue++) - stmmac_tx_clean(priv, queue); + if (likely(napi_schedule_prep(&ch->napi))) + __napi_schedule(&ch->napi); } /** @@ -2260,11 +2261,17 @@ static void stmmac_tx_timer(struct timer_list *t) */ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) { + u32 tx_channel_count = priv->plat->tx_queues_to_use; + u32 chan; + priv->tx_coal_frames = STMMAC_TX_FRAMES; priv->tx_coal_timer = STMMAC_COAL_TX_TIMER; - timer_setup(&priv->txtimer, stmmac_tx_timer, 0); - priv->txtimer.expires = STMMAC_COAL_TIMER(priv->tx_coal_timer); - add_timer(&priv->txtimer); + + for (chan = 0; chan < tx_channel_count; chan++) { + struct stmmac_tx_queue *tx_q = &priv->tx_queue[chan]; + + timer_setup(&tx_q->txtimer, stmmac_tx_timer, 0); + } } static void stmmac_set_rings_length(struct stmmac_priv *priv) @@ -2592,6 +2599,7 @@ static void stmmac_hw_teardown(struct net_device *dev) static int stmmac_open(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + u32 chan; int ret; stmmac_check_ether_addr(priv); @@ -2688,7 +2696,9 @@ irq_error: if (dev->phydev) phy_stop(dev->phydev); - del_timer_sync(&priv->txtimer); + for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) + del_timer_sync(&priv->tx_queue[chan].txtimer); + stmmac_hw_teardown(dev); init_error: free_dma_desc_resources(priv); @@ -2708,6 +2718,7 @@ dma_desc_error: static int stmmac_release(struct net_device *dev) { struct stmmac_priv *priv = netdev_priv(dev); + u32 chan; if (priv->eee_enabled) del_timer_sync(&priv->eee_ctrl_timer); @@ -2722,7 +2733,8 @@ static int stmmac_release(struct net_device *dev) stmmac_disable_all_queues(priv); - del_timer_sync(&priv->txtimer); + for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) + del_timer_sync(&priv->tx_queue[chan].txtimer); /* Free the IRQ lines */ free_irq(dev->irq, dev); @@ -2936,14 +2948,13 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) priv->xstats.tx_tso_nfrags += nfrags; /* Manage tx mitigation */ - priv->tx_count_frames += nfrags + 1; - if (likely(priv->tx_coal_frames > priv->tx_count_frames)) { - mod_timer(&priv->txtimer, - STMMAC_COAL_TIMER(priv->tx_coal_timer)); - } else { - priv->tx_count_frames = 0; + tx_q->tx_count_frames += nfrags + 1; + if (priv->tx_coal_frames <= tx_q->tx_count_frames) { stmmac_set_tx_ic(priv, desc); priv->xstats.tx_set_ic_bit++; + tx_q->tx_count_frames = 0; + } else { + stmmac_tx_timer_arm(priv, queue); } skb_tx_timestamp(skb); @@ -3146,14 +3157,13 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) * This approach takes care about the fragments: desc is the first * element in case of no SG. */ - priv->tx_count_frames += nfrags + 1; - if (likely(priv->tx_coal_frames > priv->tx_count_frames)) { - mod_timer(&priv->txtimer, - STMMAC_COAL_TIMER(priv->tx_coal_timer)); - } else { - priv->tx_count_frames = 0; + tx_q->tx_count_frames += nfrags + 1; + if (priv->tx_coal_frames <= tx_q->tx_count_frames) { stmmac_set_tx_ic(priv, desc); priv->xstats.tx_set_ic_bit++; + tx_q->tx_count_frames = 0; + } else { + stmmac_tx_timer_arm(priv, queue); } skb_tx_timestamp(skb); @@ -3199,6 +3209,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len); stmmac_enable_dma_transmission(priv, priv->ioaddr); + stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue); return NETDEV_TX_OK; @@ -3319,6 +3330,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue) static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) { struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; + struct stmmac_channel *ch = &priv->channel[queue]; unsigned int entry = rx_q->cur_rx; int coe = priv->hw->rx_csum; unsigned int next_entry; @@ -3491,7 +3503,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) else skb->ip_summed = CHECKSUM_UNNECESSARY; - napi_gro_receive(&rx_q->napi, skb); + napi_gro_receive(&ch->napi, skb); priv->dev->stats.rx_packets++; priv->dev->stats.rx_bytes += frame_len; @@ -3514,27 +3526,33 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) * Description : * To look at the incoming frames and clear the tx resources. */ -static int stmmac_poll(struct napi_struct *napi, int budget) +static int stmmac_napi_poll(struct napi_struct *napi, int budget) { - struct stmmac_rx_queue *rx_q = - container_of(napi, struct stmmac_rx_queue, napi); - struct stmmac_priv *priv = rx_q->priv_data; - u32 tx_count = priv->plat->tx_queues_to_use; - u32 chan = rx_q->queue_index; - int work_done = 0; - u32 queue; + struct stmmac_channel *ch = + container_of(napi, struct stmmac_channel, napi); + struct stmmac_priv *priv = ch->priv_data; + int work_done = 0, work_rem = budget; + u32 chan = ch->index; priv->xstats.napi_poll++; - /* check all the queues */ - for (queue = 0; queue < tx_count; queue++) - stmmac_tx_clean(priv, queue); + if (ch->has_tx) { + int done = stmmac_tx_clean(priv, work_rem, chan); - work_done = stmmac_rx(priv, budget, rx_q->queue_index); - if (work_done < budget) { - napi_complete_done(napi, work_done); - stmmac_enable_dma_irq(priv, priv->ioaddr, chan); + work_done += done; + work_rem -= done; + } + + if (ch->has_rx) { + int done = stmmac_rx(priv, work_rem, chan); + + work_done += done; + work_rem -= done; } + + if (work_done < budget && napi_complete_done(napi, work_done)) + stmmac_enable_dma_irq(priv, priv->ioaddr, chan); + return work_done; } @@ -4198,8 +4216,8 @@ int stmmac_dvr_probe(struct device *device, { struct net_device *ndev = NULL; struct stmmac_priv *priv; + u32 queue, maxq; int ret = 0; - u32 queue; ndev = alloc_etherdev_mqs(sizeof(struct stmmac_priv), MTL_MAX_TX_QUEUES, @@ -4322,11 +4340,22 @@ int stmmac_dvr_probe(struct device *device, "Enable RX Mitigation via HW Watchdog Timer\n"); } - for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; + /* Setup channels NAPI */ + maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use); - netif_napi_add(ndev, &rx_q->napi, stmmac_poll, - (8 * priv->plat->rx_queues_to_use)); + for (queue = 0; queue < maxq; queue++) { + struct stmmac_channel *ch = &priv->channel[queue]; + + ch->priv_data = priv; + ch->index = queue; + + if (queue < priv->plat->rx_queues_to_use) + ch->has_rx = true; + if (queue < priv->plat->tx_queues_to_use) + ch->has_tx = true; + + netif_napi_add(ndev, &ch->napi, stmmac_napi_poll, + NAPI_POLL_WEIGHT); } mutex_init(&priv->lock); @@ -4372,10 +4401,10 @@ error_netdev_register: priv->hw->pcs != STMMAC_PCS_RTBI) stmmac_mdio_unregister(ndev); error_mdio_register: - for (queue = 0; queue < priv->plat->rx_queues_to_use; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; + for (queue = 0; queue < maxq; queue++) { + struct stmmac_channel *ch = &priv->channel[queue]; - netif_napi_del(&rx_q->napi); + netif_napi_del(&ch->napi); } error_hw_init: destroy_workqueue(priv->wq); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index c43e9a01b892..7ddfc65586b0 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -30,6 +30,7 @@ #define MTL_MAX_RX_QUEUES 8 #define MTL_MAX_TX_QUEUES 8 +#define STMMAC_CH_MAX 8 #define STMMAC_RX_COE_NONE 0 #define STMMAC_RX_COE_TYPE1 1 -- cgit v1.2.3-59-g8ed1b From 0431100b3d82c509729ece1ab22ada2484e209c1 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 17 Sep 2018 09:22:57 +0100 Subject: net: stmmac: Fixup the tail addr setting in xmit path Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller Cc: Joao Pinto Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index ab9cc0143ff2..75896d6ba6e2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -2213,8 +2213,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv) stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg, tx_q->dma_tx_phy, chan); - tx_q->tx_tail_addr = tx_q->dma_tx_phy + - (DMA_TX_SIZE * sizeof(struct dma_desc)); + tx_q->tx_tail_addr = tx_q->dma_tx_phy; stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, chan); } @@ -3003,6 +3002,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len); + tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc)); stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue); return NETDEV_TX_OK; @@ -3210,6 +3210,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) stmmac_enable_dma_transmission(priv, priv->ioaddr); + tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * sizeof(*desc)); stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue); return NETDEV_TX_OK; -- cgit v1.2.3-59-g8ed1b From 0a286afee5a1e8dca86d824209dbd3200294f86f Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Mon, 17 Sep 2018 15:30:06 +0200 Subject: selftests: pmtu: properly redirect stderr to /dev/null The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually send stderr to /dev/null, so when the netns doesn't exist, the error message is shown. Use "2> /dev/null" instead, so that those messages disappear, as was intended. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca Acked-by: Stefano Brivio Signed-off-by: David S. Miller --- tools/testing/selftests/net/pmtu.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index 32a194e3e07a..0ab9423d009f 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -178,8 +178,8 @@ setup() { cleanup() { [ ${cleanup_done} -eq 1 ] && return - ip netns del ${NS_A} 2 > /dev/null - ip netns del ${NS_B} 2 > /dev/null + ip netns del ${NS_A} 2> /dev/null + ip netns del ${NS_B} 2> /dev/null cleanup_done=1 } -- cgit v1.2.3-59-g8ed1b From 674d9de02aa7d521ebdf66c3958758bdd9c64e11 Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan Date: Mon, 17 Sep 2018 15:51:40 +0200 Subject: NFC: Fix possible memory corruption when handling SHDLC I-Frame commands When handling SHDLC I-Frame commands "pipe" field used for indexing into an array should be checked before usage. If left unchecked it might access memory outside of the array of size NFC_HCI_MAX_PIPES(127). Malformed NFC HCI frames could be injected by a malicious NFC device communicating with the device being attacked (remote attack vector), or even by an attacker with physical access to the I2C bus such that they could influence the data transfers on that bus (local attack vector). skb->data is controlled by the attacker and has only been sanitized in the most trivial ways (CRC check), therefore we can consider the create_info struct and all of its members to tainted. 'create_info->pipe' with max value of 255 (uint8) is used to take an offset of the hdev->pipes array of 127 elements which can lead to OOB write. Cc: Samuel Ortiz Cc: Allen Pais Cc: "David S. Miller" Suggested-by: Kevin Deus Signed-off-by: Suren Baghdasaryan Acked-by: Kees Cook Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- net/nfc/hci/core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index ac8030c4bcf8..19cb2e473ea6 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -209,6 +209,11 @@ void nfc_hci_cmd_received(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd, } create_info = (struct hci_create_pipe_resp *)skb->data; + if (create_info->pipe >= NFC_HCI_MAX_PIPES) { + status = NFC_HCI_ANY_E_NOK; + goto exit; + } + /* Save the new created pipe and bind with local gate, * the description for skb->data[3] is destination gate id * but since we received this cmd from host controller, we @@ -232,6 +237,11 @@ void nfc_hci_cmd_received(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd, } delete_info = (struct hci_delete_pipe_noti *)skb->data; + if (delete_info->pipe >= NFC_HCI_MAX_PIPES) { + status = NFC_HCI_ANY_E_NOK; + goto exit; + } + hdev->pipes[delete_info->pipe].gate = NFC_HCI_INVALID_GATE; hdev->pipes[delete_info->pipe].dest_host = NFC_HCI_INVALID_HOST; break; -- cgit v1.2.3-59-g8ed1b From e285d5bfb7e9785d289663baef252dd315e171f8 Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan Date: Mon, 17 Sep 2018 15:51:41 +0200 Subject: NFC: Fix the number of pipes According to ETSI TS 102 622 specification chapter 4.4 pipe identifier is 7 bits long which allows for 128 unique pipe IDs. Because NFC_HCI_MAX_PIPES is used as the number of pipes supported and not as the max pipe ID, its value should be 128 instead of 127. nfc_hci_recv_from_llc extracts pipe ID from packet header using NFC_HCI_FRAGMENT(0x7F) mask which allows for pipe ID value of 127. Same happens when NCI_HCP_MSG_GET_PIPE() is being used. With pipes array having only 127 elements and pipe ID of 127 the OOB memory access will result. Cc: Samuel Ortiz Cc: Allen Pais Cc: "David S. Miller" Suggested-by: Dan Carpenter Signed-off-by: Suren Baghdasaryan Reviewed-by: Kees Cook Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- include/net/nfc/hci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 316694dafa5b..008f466d1da7 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -87,7 +87,7 @@ struct nfc_hci_pipe { * According to specification 102 622 chapter 4.4 Pipes, * the pipe identifier is 7 bits long. */ -#define NFC_HCI_MAX_PIPES 127 +#define NFC_HCI_MAX_PIPES 128 struct nfc_hci_init_data { u8 gate_count; struct nfc_hci_gate gates[NFC_HCI_MAX_CUSTOM_GATES]; -- cgit v1.2.3-59-g8ed1b From 08e39982ef64f800fd1f9b9b92968d14d5fafa82 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Sep 2018 17:22:40 +0200 Subject: net: emac: fix fixed-link setup for the RTL8363SB switch On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 372664686309..129f4e9f38da 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -2677,12 +2677,17 @@ static int emac_init_phy(struct emac_instance *dev) if (of_phy_is_fixed_link(np)) { int res = emac_dt_mdio_probe(dev); - if (!res) { - res = of_phy_register_fixed_link(np); - if (res) - mdiobus_unregister(dev->mii_bus); + if (res) + return res; + + res = of_phy_register_fixed_link(np); + dev->phy_dev = of_phy_find_device(np); + if (res || !dev->phy_dev) { + mdiobus_unregister(dev->mii_bus); + return res ? res : -EINVAL; } - return res; + emac_adjust_link(dev->ndev); + put_device(&dev->phy_dev->mdio.dev); } return 0; } -- cgit v1.2.3-59-g8ed1b From 65fac4fe9080714df80d430888834ce87c6716ba Mon Sep 17 00:00:00 2001 From: zhong jiang Date: Tue, 18 Sep 2018 15:15:44 +0800 Subject: net: bnxt: Fix a uninitialized variable warning. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c:49:5: warning: ‘nvm_param.dir_type’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) Signed-off-by: zhong jiang Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c index f3b9fbcc705b..790c684f08ab 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c @@ -46,6 +46,9 @@ static int bnxt_hwrm_nvm_req(struct bnxt *bp, u32 param_id, void *msg, } } + if (i == ARRAY_SIZE(nvm_params)) + return -EOPNOTSUPP; + if (nvm_param.dir_type == BNXT_NVM_PORT_CFG) idx = bp->pf.port_id; else if (nvm_param.dir_type == BNXT_NVM_FUNC_CFG) -- cgit v1.2.3-59-g8ed1b From 2fe397a3959de8a472f165e6d152f64cb77fa2cc Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Tue, 18 Sep 2018 12:22:26 +0200 Subject: ravb: do not write 1 to reserved bits EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Simon Horman Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb.h | 5 +++++ drivers/net/ethernet/renesas/ravb_main.c | 11 ++++++----- drivers/net/ethernet/renesas/ravb_ptp.c | 2 +- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h index 1470fc12282b..9b6bf557a2f5 100644 --- a/drivers/net/ethernet/renesas/ravb.h +++ b/drivers/net/ethernet/renesas/ravb.h @@ -428,6 +428,7 @@ enum EIS_BIT { EIS_CULF1 = 0x00000080, EIS_TFFF = 0x00000100, EIS_QFS = 0x00010000, + EIS_RESERVED = (GENMASK(31, 17) | GENMASK(15, 11)), }; /* RIC0 */ @@ -472,6 +473,7 @@ enum RIS0_BIT { RIS0_FRF15 = 0x00008000, RIS0_FRF16 = 0x00010000, RIS0_FRF17 = 0x00020000, + RIS0_RESERVED = GENMASK(31, 18), }; /* RIC1 */ @@ -528,6 +530,7 @@ enum RIS2_BIT { RIS2_QFF16 = 0x00010000, RIS2_QFF17 = 0x00020000, RIS2_RFFF = 0x80000000, + RIS2_RESERVED = GENMASK(30, 18), }; /* TIC */ @@ -544,6 +547,7 @@ enum TIS_BIT { TIS_FTF1 = 0x00000002, /* Undocumented? */ TIS_TFUF = 0x00000100, TIS_TFWF = 0x00000200, + TIS_RESERVED = (GENMASK(31, 20) | GENMASK(15, 12) | GENMASK(7, 4)) }; /* ISS */ @@ -617,6 +621,7 @@ enum GIC_BIT { enum GIS_BIT { GIS_PTCF = 0x00000001, /* Undocumented? */ GIS_PTMF = 0x00000004, + GIS_RESERVED = GENMASK(15, 10), }; /* GIE (R-Car Gen3 only) */ diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index aff5516b781e..d6f753925352 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -739,10 +739,11 @@ static void ravb_error_interrupt(struct net_device *ndev) u32 eis, ris2; eis = ravb_read(ndev, EIS); - ravb_write(ndev, ~EIS_QFS, EIS); + ravb_write(ndev, ~(EIS_QFS | EIS_RESERVED), EIS); if (eis & EIS_QFS) { ris2 = ravb_read(ndev, RIS2); - ravb_write(ndev, ~(RIS2_QFF0 | RIS2_RFFF), RIS2); + ravb_write(ndev, ~(RIS2_QFF0 | RIS2_RFFF | RIS2_RESERVED), + RIS2); /* Receive Descriptor Empty int */ if (ris2 & RIS2_QFF0) @@ -795,7 +796,7 @@ static bool ravb_timestamp_interrupt(struct net_device *ndev) u32 tis = ravb_read(ndev, TIS); if (tis & TIS_TFUF) { - ravb_write(ndev, ~TIS_TFUF, TIS); + ravb_write(ndev, ~(TIS_TFUF | TIS_RESERVED), TIS); ravb_get_tx_tstamp(ndev); return true; } @@ -930,7 +931,7 @@ static int ravb_poll(struct napi_struct *napi, int budget) /* Processing RX Descriptor Ring */ if (ris0 & mask) { /* Clear RX interrupt */ - ravb_write(ndev, ~mask, RIS0); + ravb_write(ndev, ~(mask | RIS0_RESERVED), RIS0); if (ravb_rx(ndev, "a, q)) goto out; } @@ -938,7 +939,7 @@ static int ravb_poll(struct napi_struct *napi, int budget) if (tis & mask) { spin_lock_irqsave(&priv->lock, flags); /* Clear TX interrupt */ - ravb_write(ndev, ~mask, TIS); + ravb_write(ndev, ~(mask | TIS_RESERVED), TIS); ravb_tx_free(ndev, q, true); netif_wake_subqueue(ndev, q); mmiowb(); diff --git a/drivers/net/ethernet/renesas/ravb_ptp.c b/drivers/net/ethernet/renesas/ravb_ptp.c index 0721b5c35d91..dce2a40a31e3 100644 --- a/drivers/net/ethernet/renesas/ravb_ptp.c +++ b/drivers/net/ethernet/renesas/ravb_ptp.c @@ -315,7 +315,7 @@ void ravb_ptp_interrupt(struct net_device *ndev) } } - ravb_write(ndev, ~gis, GIS); + ravb_write(ndev, ~(gis | GIS_RESERVED), GIS); } void ravb_ptp_init(struct net_device *ndev, struct platform_device *pdev) -- cgit v1.2.3-59-g8ed1b From 648a5a7aed346c3b8fe7c32a835edfb0dfbf4451 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 18 Sep 2018 15:46:34 +0200 Subject: net/smc: fix non-blocking connect problem In state SMC_INIT smc_poll() delegates polling to the internal CLC socket. This means, once the connect worker has finished its kernel_connect() step, the poll wake-up may occur. This is not intended. The wake-up should occur from the wake up call in smc_connect_work() after __smc_connect() has finished. Thus in state SMC_INIT this patch now calls sock_poll_wait() on the main SMC socket. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 2d8a1e15e4f9..9c3976bcde46 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -742,7 +742,10 @@ static void smc_connect_work(struct work_struct *work) smc->sk.sk_err = -rc; out: - smc->sk.sk_state_change(&smc->sk); + if (smc->sk.sk_err) + smc->sk.sk_state_change(&smc->sk); + else + smc->sk.sk_write_space(&smc->sk); kfree(smc->connect_info); smc->connect_info = NULL; release_sock(&smc->sk); @@ -1529,7 +1532,7 @@ static __poll_t smc_poll(struct file *file, struct socket *sock, return EPOLLNVAL; smc = smc_sk(sock->sk); - if ((sk->sk_state == SMC_INIT) || smc->use_fallback) { + if (smc->use_fallback) { /* delegate to CLC child sock */ mask = smc->clcsock->ops->poll(file, smc->clcsock, wait); sk->sk_err = smc->clcsock->sk->sk_err; -- cgit v1.2.3-59-g8ed1b From 1ca52fcfaca43665d525645348801a6f4a4b9e9a Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 18 Sep 2018 15:46:35 +0200 Subject: net/smc: remove duplicate mutex_unlock For a failing smc_listen_rdma_finish() smc_listen_decline() is called. If fallback is possible, the new socket is already enqueued to be accepted in smc_listen_decline(). Avoid enqueuing a second time afterwards in this case, otherwise the smc_create_lgr_pending lock is released twice: [ 373.463976] WARNING: bad unlock balance detected! [ 373.463978] 4.18.0-rc7+ #123 Tainted: G O [ 373.463979] ------------------------------------- [ 373.463980] kworker/1:1/30 is trying to release lock (smc_create_lgr_pending) at: [ 373.463990] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc] [ 373.463991] but there are no more locks to release! [ 373.463991] other info that might help us debug this: [ 373.463993] 2 locks held by kworker/1:1/30: [ 373.463994] #0: 00000000772cbaed ((wq_completion)"events"){+.+.}, at: process_one_work+0x1ec/0x6b0 [ 373.464000] #1: 000000003ad0894a ((work_completion)(&new_smc->smc_listen_work)){+.+.}, at: process_one_work+0x1ec/0x6b0 [ 373.464003] stack backtrace: [ 373.464005] CPU: 1 PID: 30 Comm: kworker/1:1 Kdump: loaded Tainted: G O 4.18.0-rc7uschi+ #123 [ 373.464007] Hardware name: IBM 2827 H43 738 (LPAR) [ 373.464010] Workqueue: events smc_listen_work [smc] [ 373.464011] Call Trace: [ 373.464015] ([<0000000000114100>] show_stack+0x60/0xd8) [ 373.464019] [<0000000000a8c9bc>] dump_stack+0x9c/0xd8 [ 373.464021] [<00000000001dcaf8>] print_unlock_imbalance_bug+0xf8/0x108 [ 373.464022] [<00000000001e045c>] lock_release+0x114/0x4f8 [ 373.464025] [<0000000000aa87fa>] __mutex_unlock_slowpath+0x4a/0x300 [ 373.464027] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc] [ 373.464029] [<0000000000197a68>] process_one_work+0x2a8/0x6b0 [ 373.464030] [<0000000000197ec2>] worker_thread+0x52/0x410 [ 373.464033] [<000000000019fd0e>] kthread+0x15e/0x178 [ 373.464035] [<0000000000aaf58a>] kernel_thread_starter+0x6/0xc [ 373.464052] [<0000000000aaf584>] kernel_thread_starter+0x0/0xc [ 373.464054] INFO: lockdep is turned off. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 9c3976bcde46..5c6d30eb4a71 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1153,9 +1153,9 @@ static int smc_listen_rdma_reg(struct smc_sock *new_smc, int local_contact) } /* listen worker: finish RDMA setup */ -static void smc_listen_rdma_finish(struct smc_sock *new_smc, - struct smc_clc_msg_accept_confirm *cclc, - int local_contact) +static int smc_listen_rdma_finish(struct smc_sock *new_smc, + struct smc_clc_msg_accept_confirm *cclc, + int local_contact) { struct smc_link *link = &new_smc->conn.lgr->lnk[SMC_SINGLE_LINK]; int reason_code = 0; @@ -1178,11 +1178,12 @@ static void smc_listen_rdma_finish(struct smc_sock *new_smc, if (reason_code) goto decline; } - return; + return 0; decline: mutex_unlock(&smc_create_lgr_pending); smc_listen_decline(new_smc, reason_code, local_contact); + return reason_code; } /* setup for RDMA connection of server */ @@ -1279,8 +1280,10 @@ static void smc_listen_work(struct work_struct *work) } /* finish worker */ - if (!ism_supported) - smc_listen_rdma_finish(new_smc, &cclc, local_contact); + if (!ism_supported) { + if (smc_listen_rdma_finish(new_smc, &cclc, local_contact)) + return; + } smc_conn_save_peer_info(new_smc, &cclc); mutex_unlock(&smc_create_lgr_pending); smc_listen_out_connected(new_smc); -- cgit v1.2.3-59-g8ed1b From dd65d87a6abd537ae9bb3bdcee8905704b936884 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 18 Sep 2018 15:46:36 +0200 Subject: net/smc: enable fallback for connection abort in state INIT If a linkgroup is terminated abnormally already due to failing LLC CONFIRM LINK or LLC ADD LINK, fallback to TCP is still possible. In this case do not switch to state SMC_PEERABORTWAIT and do not set sk_err. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_close.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/smc/smc_close.c b/net/smc/smc_close.c index ac961dfb1ea1..ea2b87f29469 100644 --- a/net/smc/smc_close.c +++ b/net/smc/smc_close.c @@ -100,15 +100,14 @@ static void smc_close_active_abort(struct smc_sock *smc) struct smc_cdc_conn_state_flags *txflags = &smc->conn.local_tx_ctrl.conn_state_flags; - sk->sk_err = ECONNABORTED; - if (smc->clcsock && smc->clcsock->sk) { - smc->clcsock->sk->sk_err = ECONNABORTED; - smc->clcsock->sk->sk_state_change(smc->clcsock->sk); + if (sk->sk_state != SMC_INIT && smc->clcsock && smc->clcsock->sk) { + sk->sk_err = ECONNABORTED; + if (smc->clcsock && smc->clcsock->sk) { + smc->clcsock->sk->sk_err = ECONNABORTED; + smc->clcsock->sk->sk_state_change(smc->clcsock->sk); + } } switch (sk->sk_state) { - case SMC_INIT: - sk->sk_state = SMC_PEERABORTWAIT; - break; case SMC_ACTIVE: sk->sk_state = SMC_PEERABORTWAIT; release_sock(sk); @@ -143,6 +142,7 @@ static void smc_close_active_abort(struct smc_sock *smc) case SMC_PEERFINCLOSEWAIT: sock_put(sk); /* passive closing */ break; + case SMC_INIT: case SMC_PEERABORTWAIT: case SMC_CLOSED: break; -- cgit v1.2.3-59-g8ed1b From 71d117f527425e2d6a5029e8365d82a8d2d6916a Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Tue, 18 Sep 2018 15:46:37 +0200 Subject: net/smc: no urgent data check for listen sockets Don't check a listen socket for pending urgent data in smc_poll(). Signed-off-by: Karsten Graul Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 5c6d30eb4a71..015231789ed2 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1566,9 +1566,9 @@ static __poll_t smc_poll(struct file *file, struct socket *sock, mask |= EPOLLIN | EPOLLRDNORM | EPOLLRDHUP; if (sk->sk_state == SMC_APPCLOSEWAIT1) mask |= EPOLLIN; + if (smc->conn.urg_state == SMC_URG_VALID) + mask |= EPOLLPRI; } - if (smc->conn.urg_state == SMC_URG_VALID) - mask |= EPOLLPRI; } return mask; -- cgit v1.2.3-59-g8ed1b From 381897798a94065ffcad0772eecdc6b04a7ff23d Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Tue, 18 Sep 2018 15:46:38 +0200 Subject: net/smc: fix sizeof to int comparison Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. kernel_sendmsg can return a negative error code. Signed-off-by: YueHaibing Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index 83aba9ade060..52241d679cc9 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -446,14 +446,12 @@ int smc_clc_send_proposal(struct smc_sock *smc, int smc_type, vec[i++].iov_len = sizeof(trl); /* due to the few bytes needed for clc-handshake this cannot block */ len = kernel_sendmsg(smc->clcsock, &msg, vec, i, plen); - if (len < sizeof(pclc)) { - if (len >= 0) { - reason_code = -ENETUNREACH; - smc->sk.sk_err = -reason_code; - } else { - smc->sk.sk_err = smc->clcsock->sk->sk_err; - reason_code = -smc->sk.sk_err; - } + if (len < 0) { + smc->sk.sk_err = smc->clcsock->sk->sk_err; + reason_code = -smc->sk.sk_err; + } else if (len < (int)sizeof(pclc)) { + reason_code = -ENETUNREACH; + smc->sk.sk_err = -reason_code; } return reason_code; -- cgit v1.2.3-59-g8ed1b From 774268f3e51b53ed432a1ec516574fd5ba469398 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Tue, 18 Sep 2018 16:58:47 +0200 Subject: net: mvpp2: fix a txq_done race condition When no Tx IRQ is available, the txq_done() routine (called from tx_done()) shouldn't be called from the polling function, as in such case it is already called in the Tx path thanks to an hrtimer. This mostly occurred when using PPv2.1, as the engine then do not have Tx IRQs. Fixes: edc660fa09e2 ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Reported-by: Stefan Chulski Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 702fec82d806..38cc01beea79 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -3055,10 +3055,12 @@ static int mvpp2_poll(struct napi_struct *napi, int budget) cause_rx_tx & ~MVPP2_CAUSE_MISC_SUM_MASK); } - cause_tx = cause_rx_tx & MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_MASK; - if (cause_tx) { - cause_tx >>= MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_OFFSET; - mvpp2_tx_done(port, cause_tx, qv->sw_thread_id); + if (port->has_tx_irqs) { + cause_tx = cause_rx_tx & MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_MASK; + if (cause_tx) { + cause_tx >>= MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_OFFSET; + mvpp2_tx_done(port, cause_tx, qv->sw_thread_id); + } } /* Process RX packets */ -- cgit v1.2.3-59-g8ed1b From 126d6848ef13958e1cb959e96c21d19bc498ade9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Sep 2018 16:48:53 +0100 Subject: sfp: fix oops with ethtool -m If a network interface is created prior to the SFP socket being available, ethtool can request module information. This unfortunately leads to an oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = (ptrval) [00000008] *pgd=7c400831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1480 Comm: ethtool Not tainted 4.19.0-rc3 #138 Hardware name: Broadcom Northstar Plus SoC PC is at sfp_get_module_info+0x8/0x10 LR is at dev_ethtool+0x218c/0x2afc Fix this by not filling in the network device's SFP bus pointer until SFP is fully bound, thereby avoiding the core calling into the SFP bus code. Fixes: ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") Reported-by: Florian Fainelli Tested-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 740655261e5b..83060fb349f4 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -349,6 +349,7 @@ static int sfp_register_bus(struct sfp_bus *bus) } if (bus->started) bus->socket_ops->start(bus->sfp); + bus->netdev->sfp_bus = bus; bus->registered = true; return 0; } @@ -357,6 +358,7 @@ static void sfp_unregister_bus(struct sfp_bus *bus) { const struct sfp_upstream_ops *ops = bus->upstream_ops; + bus->netdev->sfp_bus = NULL; if (bus->registered) { if (bus->started) bus->socket_ops->stop(bus->sfp); @@ -438,7 +440,6 @@ static void sfp_upstream_clear(struct sfp_bus *bus) { bus->upstream_ops = NULL; bus->upstream = NULL; - bus->netdev->sfp_bus = NULL; bus->netdev = NULL; } @@ -467,7 +468,6 @@ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode, bus->upstream_ops = ops; bus->upstream = upstream; bus->netdev = ndev; - ndev->sfp_bus = bus; if (bus->sfp) { ret = sfp_register_bus(bus); -- cgit v1.2.3-59-g8ed1b From 8675860592321a43bbb0b5aedc244a9b2321edc3 Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Tue, 18 Sep 2018 13:44:59 -0700 Subject: Revert "ipv6: fix double refcount of fib6_metrics" This reverts commit e70a3aad44cc8b24986687ffc98c4a4f6ecf25ea. This change causes use-after-free on dst->_metrics. The crash trace looks like this: [ 97.763269] BUG: KASAN: use-after-free in ip6_mtu+0x116/0x140 [ 97.769038] Read of size 4 at addr ffff881781d2cf84 by task svw_NetThreadEv/8801 [ 97.777954] CPU: 76 PID: 8801 Comm: svw_NetThreadEv Not tainted 4.15.0-smp-DEV #11 [ 97.777956] Hardware name: Default string Default string/Indus_QC_02, BIOS 5.46.4 03/29/2018 [ 97.777957] Call Trace: [ 97.777971] [] dump_stack+0x4d/0x72 [ 97.777985] [] print_address_description+0x6f/0x260 [ 97.777997] [] kasan_report+0x257/0x370 [ 97.778001] [] ? ip6_mtu+0x116/0x140 [ 97.778004] [] __asan_report_load4_noabort+0x19/0x20 [ 97.778008] [] ip6_mtu+0x116/0x140 [ 97.778013] [] tcp_current_mss+0x12e/0x280 [ 97.778016] [] ? tcp_mtu_to_mss+0x2d0/0x2d0 [ 97.778022] [] ? depot_save_stack+0x138/0x4a0 [ 97.778037] [] ? __mmdrop+0x145/0x1f0 [ 97.778040] [] ? save_stack+0xb1/0xd0 [ 97.778046] [] tcp_send_mss+0x22/0x220 [ 97.778059] [] tcp_sendmsg_locked+0x4f9/0x39f0 [ 97.778062] [] ? kasan_check_write+0x14/0x20 [ 97.778066] [] ? tcp_sendpage+0x60/0x60 [ 97.778070] [] ? rw_copy_check_uvector+0x69/0x280 [ 97.778075] [] ? import_iovec+0x9f/0x430 [ 97.778078] [] ? kasan_slab_free+0x87/0xc0 [ 97.778082] [] ? memzero_page+0x140/0x140 [ 97.778085] [] ? kasan_check_write+0x14/0x20 [ 97.778088] [] tcp_sendmsg+0x2c/0x50 [ 97.778092] [] ? tcp_sendmsg+0x2c/0x50 [ 97.778098] [] inet_sendmsg+0x103/0x480 [ 97.778102] [] ? inet_gso_segment+0x15b0/0x15b0 [ 97.778105] [] sock_sendmsg+0xba/0xf0 [ 97.778108] [] ___sys_sendmsg+0x6ca/0x8e0 [ 97.778113] [] ? hrtimer_try_to_cancel+0x71/0x3b0 [ 97.778116] [] ? copy_msghdr_from_user+0x3d0/0x3d0 [ 97.778119] [] ? memset+0x31/0x40 [ 97.778123] [] ? schedule_hrtimeout_range_clock+0x165/0x380 [ 97.778127] [] ? hrtimer_nanosleep_restart+0x250/0x250 [ 97.778130] [] ? __hrtimer_init+0x180/0x180 [ 97.778133] [] ? ktime_get_ts64+0x172/0x200 [ 97.778137] [] ? __fget_light+0x8c/0x2f0 [ 97.778141] [] __sys_sendmsg+0xe6/0x190 [ 97.778144] [] ? __sys_sendmsg+0xe6/0x190 [ 97.778147] [] ? SyS_shutdown+0x20/0x20 [ 97.778152] [] ? wake_up_q+0xe0/0xe0 [ 97.778155] [] ? __sys_sendmsg+0x190/0x190 [ 97.778158] [] SyS_sendmsg+0x13/0x20 [ 97.778162] [] do_syscall_64+0x2ac/0x430 [ 97.778166] [] ? do_page_fault+0x35/0x3d0 [ 97.778171] [] ? page_fault+0x2f/0x50 [ 97.778174] [] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 97.778177] RIP: 0033:0x7f83fa36000d [ 97.778178] RSP: 002b:00007f83ef9229e0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 97.778180] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f83fa36000d [ 97.778182] RDX: 0000000000004000 RSI: 00007f83ef922f00 RDI: 0000000000000036 [ 97.778183] RBP: 00007f83ef923040 R08: 00007f83ef9231f8 R09: 00007f83ef923168 [ 97.778184] R10: 0000000000000000 R11: 0000000000000293 R12: 00007f83f69c5b40 [ 97.778185] R13: 000000000000001c R14: 0000000000000001 R15: 0000000000004000 [ 97.779684] Allocated by task 5919: [ 97.783185] save_stack+0x46/0xd0 [ 97.783187] kasan_kmalloc+0xad/0xe0 [ 97.783189] kmem_cache_alloc_trace+0xdf/0x580 [ 97.783190] ip6_convert_metrics.isra.79+0x7e/0x190 [ 97.783192] ip6_route_info_create+0x60a/0x2480 [ 97.783193] ip6_route_add+0x1d/0x80 [ 97.783195] inet6_rtm_newroute+0xdd/0xf0 [ 97.783198] rtnetlink_rcv_msg+0x641/0xb10 [ 97.783200] netlink_rcv_skb+0x27b/0x3e0 [ 97.783202] rtnetlink_rcv+0x15/0x20 [ 97.783203] netlink_unicast+0x4be/0x720 [ 97.783204] netlink_sendmsg+0x7bc/0xbf0 [ 97.783205] sock_sendmsg+0xba/0xf0 [ 97.783207] ___sys_sendmsg+0x6ca/0x8e0 [ 97.783208] __sys_sendmsg+0xe6/0x190 [ 97.783209] SyS_sendmsg+0x13/0x20 [ 97.783211] do_syscall_64+0x2ac/0x430 [ 97.783213] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 97.784709] Freed by task 0: [ 97.785056] knetbase: Error: /proc/sys/net/core/txcs_enable does not exist [ 97.794497] save_stack+0x46/0xd0 [ 97.794499] kasan_slab_free+0x71/0xc0 [ 97.794500] kfree+0x7c/0xf0 [ 97.794501] fib6_info_destroy_rcu+0x24f/0x310 [ 97.794504] rcu_process_callbacks+0x38b/0x1730 [ 97.794506] __do_softirq+0x1c8/0x5d0 Reported-by: John Sperbeck Signed-off-by: Wei Wang Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 480a79f47c52..b5d3e6b294ab 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -976,6 +976,10 @@ static void rt6_set_from(struct rt6_info *rt, struct fib6_info *from) rt->rt6i_flags &= ~RTF_EXPIRES; rcu_assign_pointer(rt->from, from); dst_init_metrics(&rt->dst, from->fib6_metrics->metrics, true); + if (from->fib6_metrics != &dst_default_metrics) { + rt->dst._metrics |= DST_METRICS_REFCOUNTED; + refcount_inc(&from->fib6_metrics->refcnt); + } } /* Caller must already hold reference to @ort */ -- cgit v1.2.3-59-g8ed1b From ce7ea4af0838ffd4667ecad4eb5eec7a25342f1e Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Tue, 18 Sep 2018 13:45:00 -0700 Subject: ipv6: fix memory leak on dst->_metrics When dst->_metrics and f6i->fib6_metrics share the same memory, both take reference count on the dst_metrics structure. However, when dst is destroyed, ip6_dst_destroy() only invokes dst_destroy_metrics_generic() which does not take care of READONLY metrics and does not release refcnt. This causes memory leak. Similar to ipv4 logic, the fix is to properly release refcnt and free the memory space pointed by dst->_metrics if refcnt becomes 0. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Sabrina Dubroca Signed-off-by: Wei Wang Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index b5d3e6b294ab..826b14de7dbb 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -364,11 +364,14 @@ EXPORT_SYMBOL(ip6_dst_alloc); static void ip6_dst_destroy(struct dst_entry *dst) { + struct dst_metrics *p = (struct dst_metrics *)DST_METRICS_PTR(dst); struct rt6_info *rt = (struct rt6_info *)dst; struct fib6_info *from; struct inet6_dev *idev; - dst_destroy_metrics_generic(dst); + if (p != &dst_default_metrics && refcount_dec_and_test(&p->refcnt)) + kfree(p); + rt6_uncached_list_del(rt); idev = rt->rt6i_idev; -- cgit v1.2.3-59-g8ed1b From 558a9ef94a329a1ac75613407ad15d0d0071ff4c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sun, 16 Sep 2018 12:34:06 +0800 Subject: drm: sun4i: drop second PLL from A64 HDMI PHY The A64 HDMI PHY seems to be not able to use the second video PLL as clock parent in experiments. Drop the support for the second PLL from A64 HDMI PHY driver. Fixes: b46e2c9f5f64 ("drm/sun4i: Add support for A64 HDMI PHY") Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180916043409.62374-2-icenowy@aosc.io --- drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 82502b351aec..a564b5dfe082 100644 --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c @@ -398,7 +398,6 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = { static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = { .has_phy_clk = true, - .has_second_pll = true, .phy_init = &sun8i_hdmi_phy_init_h3, .phy_disable = &sun8i_hdmi_phy_disable_h3, .phy_config = &sun8i_hdmi_phy_config_h3, -- cgit v1.2.3-59-g8ed1b From 571d0563c8881595f4ab027aef9ed1c55e3e7b7c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 19 Sep 2018 13:35:53 +0300 Subject: x86/paravirt: Fix some warning messages The first argument to WARN_ONCE() is a condition. Fixes: 5800dc5c19f3 ("x86/paravirt: Fix spectre-v2 mitigations for paravirt guests") Signed-off-by: Dan Carpenter Signed-off-by: Thomas Gleixner Reviewed-by: Juergen Gross Cc: Peter Zijlstra Cc: Alok Kataria Cc: "H. Peter Anvin" Cc: virtualization@lists.linux-foundation.org Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20180919103553.GD9238@mwanda --- arch/x86/kernel/paravirt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index afdb303285f8..8dc69d82567e 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -91,7 +91,7 @@ unsigned paravirt_patch_call(void *insnbuf, if (len < 5) { #ifdef CONFIG_RETPOLINE - WARN_ONCE("Failing to patch indirect CALL in %ps\n", (void *)addr); + WARN_ONCE(1, "Failing to patch indirect CALL in %ps\n", (void *)addr); #endif return len; /* call too long for patch site */ } @@ -111,7 +111,7 @@ unsigned paravirt_patch_jmp(void *insnbuf, const void *target, if (len < 5) { #ifdef CONFIG_RETPOLINE - WARN_ONCE("Failing to patch indirect JMP in %ps\n", (void *)addr); + WARN_ONCE(1, "Failing to patch indirect JMP in %ps\n", (void *)addr); #endif return len; /* call too long for patch site */ } -- cgit v1.2.3-59-g8ed1b From 9e796c9db93b4840d1b00e550eea26db7cb741e2 Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Fri, 14 Sep 2018 08:51:14 -0600 Subject: ext2, dax: set ext2_dax_aops for dax files Sync syscall to DAX file needs to flush processor cache, but it currently does not flush to existing DAX files. This is because 'ext2_da_aops' is set to address_space_operations of existing DAX files, instead of 'ext2_dax_aops', since S_DAX flag is set after ext2_set_aops() in the open path. Similar to ext4, change ext2_iget() to initialize i_flags before ext2_set_aops(). Fixes: fb094c90748f ("ext2, dax: introduce ext2_dax_aops") Signed-off-by: Toshi Kani Suggested-by: Jan Kara Cc: Jan Kara Cc: Dan Williams Cc: "Theodore Ts'o" Cc: Andreas Dilger Cc: Signed-off-by: Jan Kara --- fs/ext2/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c index 7f7ee18fe179..e4bb9386c045 100644 --- a/fs/ext2/inode.c +++ b/fs/ext2/inode.c @@ -1448,6 +1448,7 @@ struct inode *ext2_iget (struct super_block *sb, unsigned long ino) } inode->i_blocks = le32_to_cpu(raw_inode->i_blocks); ei->i_flags = le32_to_cpu(raw_inode->i_flags); + ext2_set_inode_flags(inode); ei->i_faddr = le32_to_cpu(raw_inode->i_faddr); ei->i_frag_no = raw_inode->i_frag; ei->i_frag_size = raw_inode->i_fsize; @@ -1517,7 +1518,6 @@ struct inode *ext2_iget (struct super_block *sb, unsigned long ino) new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); } brelse (bh); - ext2_set_inode_flags(inode); unlock_new_inode(inode); return inode; -- cgit v1.2.3-59-g8ed1b From 336b08088d4da009108d4418e241ca95c9152237 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 19 Sep 2018 13:48:41 +0200 Subject: MAINTAINERS: Add Borislav to the x86 maintainers Borislav is effectivly maintaining parts of X86 already, make it official. Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar Acked-by: Borislav Petkov --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4ece30f15777..091e66b60cd2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15913,6 +15913,7 @@ F: net/x25/ X86 ARCHITECTURE (32-BIT AND 64-BIT) M: Thomas Gleixner M: Ingo Molnar +M: Borislav Petkov R: "H. Peter Anvin" M: x86@kernel.org L: linux-kernel@vger.kernel.org -- cgit v1.2.3-59-g8ed1b From 70513d58751d7c6c1a0133557b13089b9f2e3e66 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 12 Jul 2018 13:27:00 -0400 Subject: xen/x86/vpmu: Zero struct pt_regs before calling into sample handling code Otherwise we may leak kernel stack for events that sample user registers. Reported-by: Mark Rutland Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky Cc: stable@vger.kernel.org --- arch/x86/xen/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c index 7d00d4ad44d4..95997e6c0696 100644 --- a/arch/x86/xen/pmu.c +++ b/arch/x86/xen/pmu.c @@ -478,7 +478,7 @@ static void xen_convert_regs(const struct xen_pmu_regs *xen_regs, irqreturn_t xen_pmu_irq_handler(int irq, void *dev_id) { int err, ret = IRQ_NONE; - struct pt_regs regs; + struct pt_regs regs = {0}; const struct xen_pmu_data *xenpmu_data = get_xenpmu_data(); uint8_t xenpmu_flags = get_xenpmu_flags(); -- cgit v1.2.3-59-g8ed1b From d59f532480f5231bf62615a9287e05b78225fb05 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Wed, 19 Sep 2018 15:42:33 +0200 Subject: xen: issue warning message when out of grant maptrack entries When a driver domain (e.g. dom0) is running out of maptrack entries it can't map any more foreign domain pages. Instead of silently stalling the affected domUs issue a rate limited warning in this case in order to make it easier to detect that situation. Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky --- drivers/xen/grant-table.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 7bafa703a992..84575baceebc 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -1040,18 +1040,33 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, return ret; for (i = 0; i < count; i++) { - /* Retry eagain maps */ - if (map_ops[i].status == GNTST_eagain) - gnttab_retry_eagain_gop(GNTTABOP_map_grant_ref, map_ops + i, - &map_ops[i].status, __func__); - - if (map_ops[i].status == GNTST_okay) { + switch (map_ops[i].status) { + case GNTST_okay: + { struct xen_page_foreign *foreign; SetPageForeign(pages[i]); foreign = xen_page_foreign(pages[i]); foreign->domid = map_ops[i].dom; foreign->gref = map_ops[i].ref; + break; + } + + case GNTST_no_device_space: + pr_warn_ratelimited("maptrack limit reached, can't map all guest pages\n"); + break; + + case GNTST_eagain: + /* Retry eagain maps */ + gnttab_retry_eagain_gop(GNTTABOP_map_grant_ref, + map_ops + i, + &map_ops[i].status, __func__); + /* Test status in next loop iteration. */ + i--; + break; + + default: + break; } } -- cgit v1.2.3-59-g8ed1b From ee92efe41cf358f4b99e73509f2bfd4733609f26 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 17 Sep 2018 18:10:05 -0700 Subject: IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop Use different loop variables for the inner and outer loop. This avoids that an infinite loop occurs if there are more RDMA channels than target->req_ring_size. Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Cc: Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/srp/ib_srp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 444d16520506..0b34e909505f 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -2951,7 +2951,7 @@ static int srp_reset_device(struct scsi_cmnd *scmnd) { struct srp_target_port *target = host_to_target(scmnd->device->host); struct srp_rdma_ch *ch; - int i; + int i, j; u8 status; shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n"); @@ -2965,8 +2965,8 @@ static int srp_reset_device(struct scsi_cmnd *scmnd) for (i = 0; i < target->ch_count; i++) { ch = &target->ch[i]; - for (i = 0; i < target->req_ring_size; ++i) { - struct srp_request *req = &ch->req_ring[i]; + for (j = 0; j < target->req_ring_size; ++j) { + struct srp_request *req = &ch->req_ring[j]; srp_finish_req(ch, req, scmnd->device, DID_RESET << 16); } -- cgit v1.2.3-59-g8ed1b From 080220b687147fd9376878534aba7194f17f6ef5 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 18 Sep 2018 10:13:59 -0700 Subject: tools: bpf: fix license for a compat header file libc_compat.h is used by libbpf so make sure it's licensed under LGPL or BSD license. The license change should be OK, I'm the only author of the file. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/include/tools/libc_compat.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/include/tools/libc_compat.h b/tools/include/tools/libc_compat.h index 664ced8cb1b0..e907ba6f15e5 100644 --- a/tools/include/tools/libc_compat.h +++ b/tools/include/tools/libc_compat.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: (LGPL-2.0+ OR BSD-2-Clause) /* Copyright (C) 2018 Netronome Systems, Inc. */ #ifndef __TOOLS_LIBC_COMPAT_H -- cgit v1.2.3-59-g8ed1b From d1766202779e81d0f2a94c4650a6ba31497d369d Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Thu, 2 Aug 2018 17:08:16 +0200 Subject: x86/kvm/lapic: always disable MMIO interface in x2APIC mode When VMX is used with flexpriority disabled (because of no support or if disabled with module parameter) MMIO interface to lAPIC is still available in x2APIC mode while it shouldn't be (kvm-unit-tests): PASS: apic_disable: Local apic enabled in x2APIC mode PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set FAIL: apic_disable: *0xfee00030: 50014 The issue appears because we basically do nothing while switching to x2APIC mode when APIC access page is not used. apic_mmio_{read,write} only check if lAPIC is disabled before proceeding to actual write. When APIC access is virtualized we correctly manipulate with VMX controls in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes in x2APIC mode so there's no issue. Disabling MMIO interface seems to be easy. The question is: what do we do with these reads and writes? If we add apic_x2apic_mode() check to apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will go to userspace. When lAPIC is in kernel, Qemu uses this interface to inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This somehow works with disabled lAPIC but when we're in xAPIC mode we will get a real injected MSI from every write to lAPIC. Not good. The simplest solution seems to be to just ignore writes to the region and return ~0 for all reads when we're in x2APIC mode. This is what this patch does. However, this approach is inconsistent with what currently happens when flexpriority is enabled: we allocate APIC access page and create KVM memory region so in x2APIC modes all reads and writes go to this pre-allocated page which is, btw, the same for all vCPUs. Signed-off-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini --- arch/x86/include/uapi/asm/kvm.h | 1 + arch/x86/kvm/lapic.c | 22 +++++++++++++++++++--- 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h index 86299efa804a..fd23d5778ea1 100644 --- a/arch/x86/include/uapi/asm/kvm.h +++ b/arch/x86/include/uapi/asm/kvm.h @@ -377,6 +377,7 @@ struct kvm_sync_regs { #define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) #define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) +#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 17c0472c5b34..fbb0e6df121b 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1344,9 +1344,8 @@ EXPORT_SYMBOL_GPL(kvm_lapic_reg_read); static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr) { - return kvm_apic_hw_enabled(apic) && - addr >= apic->base_address && - addr < apic->base_address + LAPIC_MMIO_LENGTH; + return addr >= apic->base_address && + addr < apic->base_address + LAPIC_MMIO_LENGTH; } static int apic_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *this, @@ -1358,6 +1357,15 @@ static int apic_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *this, if (!apic_mmio_in_range(apic, address)) return -EOPNOTSUPP; + if (!kvm_apic_hw_enabled(apic) || apic_x2apic_mode(apic)) { + if (!kvm_check_has_quirk(vcpu->kvm, + KVM_X86_QUIRK_LAPIC_MMIO_HOLE)) + return -EOPNOTSUPP; + + memset(data, 0xff, len); + return 0; + } + kvm_lapic_reg_read(apic, offset, len, data); return 0; @@ -1917,6 +1925,14 @@ static int apic_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *this, if (!apic_mmio_in_range(apic, address)) return -EOPNOTSUPP; + if (!kvm_apic_hw_enabled(apic) || apic_x2apic_mode(apic)) { + if (!kvm_check_has_quirk(vcpu->kvm, + KVM_X86_QUIRK_LAPIC_MMIO_HOLE)) + return -EOPNOTSUPP; + + return 0; + } + /* * APIC register must be aligned on 128-bits boundary. * 32/64/128 bits registers must be accessed thru 32 bits. -- cgit v1.2.3-59-g8ed1b From d35b34a9a70edae7ef923f100e51b8b5ae9fe899 Mon Sep 17 00:00:00 2001 From: Junaid Shahid Date: Wed, 8 Aug 2018 17:45:24 -0700 Subject: kvm: mmu: Don't read PDPTEs when paging is not enabled kvm should not attempt to read guest PDPTEs when CR0.PG = 0 and CR4.PAE = 1. Signed-off-by: Junaid Shahid Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 542f6315444d..5c870203737f 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -628,7 +628,7 @@ bool pdptrs_changed(struct kvm_vcpu *vcpu) gfn_t gfn; int r; - if (is_long_mode(vcpu) || !is_pae(vcpu)) + if (is_long_mode(vcpu) || !is_pae(vcpu) || !is_paging(vcpu)) return false; if (!test_bit(VCPU_EXREG_PDPTR, @@ -8177,7 +8177,7 @@ static int __set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) kvm_update_cpuid(vcpu); idx = srcu_read_lock(&vcpu->kvm->srcu); - if (!is_long_mode(vcpu) && is_pae(vcpu)) { + if (!is_long_mode(vcpu) && is_pae(vcpu) && is_paging(vcpu)) { load_pdptrs(vcpu, vcpu->arch.walk_mmu, kvm_read_cr3(vcpu)); mmu_reset_needed = 1; } -- cgit v1.2.3-59-g8ed1b From 83b20b28c670868bfb717be4fe1557c925a81657 Mon Sep 17 00:00:00 2001 From: Wei Yang Date: Fri, 7 Sep 2018 19:59:47 +0800 Subject: KVM: x86: don't reset root in kvm_mmu_setup() Here is the code path which shows kvm_mmu_setup() is invoked after kvm_mmu_create(). Since kvm_mmu_setup() is only invoked in this code path, this means the root_hpa and prev_roots are guaranteed to be invalid. And it is not necessary to reset it again. kvm_vm_ioctl_create_vcpu() kvm_arch_vcpu_create() vmx_create_vcpu() kvm_vcpu_init() kvm_arch_vcpu_init() kvm_mmu_create() kvm_arch_vcpu_setup() kvm_mmu_setup() kvm_init_mmu() This patch set reset_roots to false in kmv_mmu_setup(). Fixes: 50c28f21d045dde8c52548f8482d456b3f0956f5 Signed-off-by: Wei Yang Reviewed-by: Liran Alon Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index e24ea7067373..5402c53a079b 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -5417,7 +5417,12 @@ void kvm_mmu_setup(struct kvm_vcpu *vcpu) { MMU_WARN_ON(VALID_PAGE(vcpu->arch.mmu.root_hpa)); - kvm_init_mmu(vcpu, true); + /* + * kvm_mmu_setup() is called only on vCPU initialization. + * Therefore, no need to reset mmu roots as they are not yet + * initialized. + */ + kvm_init_mmu(vcpu, false); } static void kvm_mmu_invalidate_zap_pages_in_memslot(struct kvm *kvm, -- cgit v1.2.3-59-g8ed1b From 6bd317d3c865ebcddcb287a424093fe4758c40ef Mon Sep 17 00:00:00 2001 From: Lei Yang Date: Wed, 29 Aug 2018 15:04:08 +0800 Subject: kvm: selftests: use -pthread instead of -lpthread I run into the following error testing/selftests/kvm/dirty_log_test.c:285: undefined reference to `pthread_create' testing/selftests/kvm/dirty_log_test.c:297: undefined reference to `pthread_join' collect2: error: ld returned 1 exit status my gcc version is gcc version 4.8.4 "-pthread" would work everywhere Signed-off-by: Lei Yang Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 03b0f551bedf..48c970c90353 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -20,7 +20,7 @@ INSTALL_HDR_PATH = $(top_srcdir)/usr LINUX_HDR_PATH = $(INSTALL_HDR_PATH)/include/ LINUX_TOOL_INCLUDE = $(top_srcdir)tools/include CFLAGS += -O2 -g -std=gnu99 -I$(LINUX_TOOL_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude -I$( Date: Fri, 7 Sep 2018 05:45:02 +0000 Subject: KVM/MMU: Fix comment in walk_shadow_page_lockless_end() kvm_commit_zap_page() has been renamed to kvm_mmu_commit_zap_page() This patch is to fix the commit. Signed-off-by: Lan Tianyu Signed-off-by: Paolo Bonzini --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 5402c53a079b..d7e9bce6ff61 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -899,7 +899,7 @@ static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu) { /* * Make sure the write to vcpu->mode is not reordered in front of - * reads to sptes. If it does, kvm_commit_zap_page() can see us + * reads to sptes. If it does, kvm_mmu_commit_zap_page() can see us * OUTSIDE_GUEST_MODE and proceed to free the shadow page table. */ smp_store_release(&vcpu->mode, OUTSIDE_GUEST_MODE); -- cgit v1.2.3-59-g8ed1b From a101c9d63ebb294144e596bfe9b4ae3156b1be96 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 30 Aug 2018 14:49:59 +0300 Subject: KVM: SVM: Switch to bitmap_zalloc() Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko Signed-off-by: Paolo Bonzini --- arch/x86/kvm/svm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 89c4c5aa15f1..c7f1c3fd782d 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1226,8 +1226,7 @@ static __init int sev_hardware_setup(void) min_sev_asid = cpuid_edx(0x8000001F); /* Initialize SEV ASID bitmap */ - sev_asid_bitmap = kcalloc(BITS_TO_LONGS(max_sev_asid), - sizeof(unsigned long), GFP_KERNEL); + sev_asid_bitmap = bitmap_zalloc(max_sev_asid, GFP_KERNEL); if (!sev_asid_bitmap) return 1; @@ -1405,7 +1404,7 @@ static __exit void svm_hardware_unsetup(void) int cpu; if (svm_sev_enabled()) - kfree(sev_asid_bitmap); + bitmap_free(sev_asid_bitmap); for_each_possible_cpu(cpu) svm_cpu_uninit(cpu); -- cgit v1.2.3-59-g8ed1b From 4c008127e4716d246b44b403f8a65ae9744d32c4 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 27 Aug 2018 15:21:10 -0700 Subject: KVM: VMX: immediately mark preemption timer expired only for zero value A VMX preemption timer value of '0' at the time of VMEnter is architecturally guaranteed to cause a VMExit prior to the CPU executing any instructions in the guest. This architectural definition is in place to ensure that a previously expired timer is correctly recognized by the CPU as it is possible for the timer to reach zero and not trigger a VMexit due to a higher priority VMExit being signalled instead, e.g. a pending #DB that morphs into a VMExit. Whether by design or coincidence, commit f4124500c2c1 ("KVM: nVMX: Fully emulate preemption timer") special cased timer values of '0' and '1' to ensure prompt delivery of the VMExit. Unlike '0', a timer value of '1' has no has no architectural guarantees regarding when it is delivered. Modify the timer emulation to trigger immediate VMExit if and only if the timer value is '0', and document precisely why '0' is special. Do this even if calibration of the virtual TSC failed, i.e. VMExit will occur immediately regardless of the frequency of the timer. Making only '0' a special case gives KVM leeway to be more aggressive in ensuring the VMExit is injected prior to executing instructions in the nested guest, and also eliminates any ambiguity as to why '1' is a special case, e.g. why wasn't the threshold for a "short timeout" set to 10, 100, 1000, etc... Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 533a327372c8..4655d6dd6759 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11427,16 +11427,18 @@ static void vmx_start_preemption_timer(struct kvm_vcpu *vcpu) u64 preemption_timeout = get_vmcs12(vcpu)->vmx_preemption_timer_value; struct vcpu_vmx *vmx = to_vmx(vcpu); - if (vcpu->arch.virtual_tsc_khz == 0) - return; - - /* Make sure short timeouts reliably trigger an immediate vmexit. - * hrtimer_start does not guarantee this. */ - if (preemption_timeout <= 1) { + /* + * A timer value of zero is architecturally guaranteed to cause + * a VMExit prior to executing any instructions in the guest. + */ + if (preemption_timeout == 0) { vmx_preemption_timer_fn(&vmx->nested.preemption_timer); return; } + if (vcpu->arch.virtual_tsc_khz == 0) + return; + preemption_timeout <<= VMX_MISC_EMULATED_PREEMPTION_TIMER_RATE; preemption_timeout *= 1000000; do_div(preemption_timeout, vcpu->arch.virtual_tsc_khz); -- cgit v1.2.3-59-g8ed1b From f459a707ed313f110e4939d634317edcf9e96774 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 27 Aug 2018 15:21:11 -0700 Subject: KVM: VMX: modify preemption timer bit only when arming timer Provide a singular location where the VMX preemption timer bit is set/cleared so that future usages of the preemption timer can ensure the VMCS bit is up-to-date without having to modify unrelated code paths. For example, the preemption timer can be used to force an immediate VMExit. Cache the status of the timer to avoid redundant VMREAD and VMWRITE, e.g. if the timer stays armed across multiple VMEnters/VMExits. Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 61 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 32 insertions(+), 29 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 4655d6dd6759..62670b2f6d48 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -397,6 +397,7 @@ struct loaded_vmcs { int cpu; bool launched; bool nmi_known_unmasked; + bool hv_timer_armed; /* Support for vnmi-less CPUs */ int soft_vnmi_blocked; ktime_t entry_time; @@ -10595,24 +10596,38 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx) msrs[i].host, false); } -static void vmx_arm_hv_timer(struct kvm_vcpu *vcpu) +static void vmx_arm_hv_timer(struct vcpu_vmx *vmx, u32 val) +{ + vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, val); + if (!vmx->loaded_vmcs->hv_timer_armed) + vmcs_set_bits(PIN_BASED_VM_EXEC_CONTROL, + PIN_BASED_VMX_PREEMPTION_TIMER); + vmx->loaded_vmcs->hv_timer_armed = true; +} + +static void vmx_update_hv_timer(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); u64 tscl; u32 delta_tsc; - if (vmx->hv_deadline_tsc == -1) - return; + if (vmx->hv_deadline_tsc != -1) { + tscl = rdtsc(); + if (vmx->hv_deadline_tsc > tscl) + /* set_hv_timer ensures the delta fits in 32-bits */ + delta_tsc = (u32)((vmx->hv_deadline_tsc - tscl) >> + cpu_preemption_timer_multi); + else + delta_tsc = 0; - tscl = rdtsc(); - if (vmx->hv_deadline_tsc > tscl) - /* sure to be 32 bit only because checked on set_hv_timer */ - delta_tsc = (u32)((vmx->hv_deadline_tsc - tscl) >> - cpu_preemption_timer_multi); - else - delta_tsc = 0; + vmx_arm_hv_timer(vmx, delta_tsc); + return; + } - vmcs_write32(VMX_PREEMPTION_TIMER_VALUE, delta_tsc); + if (vmx->loaded_vmcs->hv_timer_armed) + vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL, + PIN_BASED_VMX_PREEMPTION_TIMER); + vmx->loaded_vmcs->hv_timer_armed = false; } static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) @@ -10672,7 +10687,7 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) atomic_switch_perf_msrs(vmx); - vmx_arm_hv_timer(vcpu); + vmx_update_hv_timer(vcpu); /* * If this vCPU has touched SPEC_CTRL, restore the guest's value if @@ -12078,11 +12093,10 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, exec_control = vmcs12->pin_based_vm_exec_control; - /* Preemption timer setting is only taken from vmcs01. */ - exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER; + /* Preemption timer setting is computed directly in vmx_vcpu_run. */ exec_control |= vmcs_config.pin_based_exec_ctrl; - if (vmx->hv_deadline_tsc == -1) - exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER; + exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER; + vmx->loaded_vmcs->hv_timer_armed = false; /* Posted interrupts setting is only taken from vmcs12. */ if (nested_cpu_has_posted_intr(vmcs12)) { @@ -13255,12 +13269,7 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason, vmcs_write32(VM_EXIT_MSR_LOAD_COUNT, vmx->msr_autoload.host.nr); vmcs_write32(VM_ENTRY_MSR_LOAD_COUNT, vmx->msr_autoload.guest.nr); vmcs_write64(TSC_OFFSET, vcpu->arch.tsc_offset); - if (vmx->hv_deadline_tsc == -1) - vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL, - PIN_BASED_VMX_PREEMPTION_TIMER); - else - vmcs_set_bits(PIN_BASED_VM_EXEC_CONTROL, - PIN_BASED_VMX_PREEMPTION_TIMER); + if (kvm_has_tsc_control) decache_tsc_multiplier(vmx); @@ -13464,18 +13473,12 @@ static int vmx_set_hv_timer(struct kvm_vcpu *vcpu, u64 guest_deadline_tsc) return -ERANGE; vmx->hv_deadline_tsc = tscl + delta_tsc; - vmcs_set_bits(PIN_BASED_VM_EXEC_CONTROL, - PIN_BASED_VMX_PREEMPTION_TIMER); - return delta_tsc == 0; } static void vmx_cancel_hv_timer(struct kvm_vcpu *vcpu) { - struct vcpu_vmx *vmx = to_vmx(vcpu); - vmx->hv_deadline_tsc = -1; - vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL, - PIN_BASED_VMX_PREEMPTION_TIMER); + to_vmx(vcpu)->hv_deadline_tsc = -1; } #endif -- cgit v1.2.3-59-g8ed1b From d264ee0c2ed20c6a426663590d4fc7a36cb6abd7 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Mon, 27 Aug 2018 15:21:12 -0700 Subject: KVM: VMX: use preemption timer to force immediate VMExit A VMX preemption timer value of '0' is guaranteed to cause a VMExit prior to the CPU executing any instructions in the guest. Use the preemption timer (if it's supported) to trigger immediate VMExit in place of the current method of sending a self-IPI. This ensures that pending VMExit injection to L1 occurs prior to executing any instructions in the guest (regardless of nesting level). When deferring VMExit injection, KVM generates an immediate VMExit from the (possibly nested) guest by sending itself an IPI. Because hardware interrupts are blocked prior to VMEnter and are unblocked (in hardware) after VMEnter, this results in taking a VMExit(INTR) before any guest instruction is executed. But, as this approach relies on the IPI being received before VMEnter executes, it only works as intended when KVM is running as L0. Because there are no architectural guarantees regarding when IPIs are delivered, when running nested the INTR may "arrive" long after L2 is running e.g. L0 KVM doesn't force an immediate switch to L1 to deliver an INTR. For the most part, this unintended delay is not an issue since the events being injected to L1 also do not have architectural guarantees regarding their timing. The notable exception is the VMX preemption timer[1], which is architecturally guaranteed to cause a VMExit prior to executing any instructions in the guest if the timer value is '0' at VMEnter. Specifically, the delay in injecting the VMExit causes the preemption timer KVM unit test to fail when run in a nested guest. Note: this approach is viable even on CPUs with a broken preemption timer, as broken in this context only means the timer counts at the wrong rate. There are no known errata affecting timer value of '0'. [1] I/O SMIs also have guarantees on when they arrive, but I have no idea if/how those are emulated in KVM. Signed-off-by: Sean Christopherson [Use a hook for SVM instead of leaving the default in x86.c - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 2 ++ arch/x86/kvm/svm.c | 2 ++ arch/x86/kvm/vmx.c | 21 ++++++++++++++++++++- arch/x86/kvm/x86.c | 8 +++++++- 4 files changed, 31 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 8e90488c3d56..bffb25b50425 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1055,6 +1055,7 @@ struct kvm_x86_ops { bool (*umip_emulated)(void); int (*check_nested_events)(struct kvm_vcpu *vcpu, bool external_intr); + void (*request_immediate_exit)(struct kvm_vcpu *vcpu); void (*sched_in)(struct kvm_vcpu *kvm, int cpu); @@ -1482,6 +1483,7 @@ extern bool kvm_find_async_pf_gfn(struct kvm_vcpu *vcpu, gfn_t gfn); int kvm_skip_emulated_instruction(struct kvm_vcpu *vcpu); int kvm_complete_insn_gp(struct kvm_vcpu *vcpu, int err); +void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu); int kvm_is_in_guest(void); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index c7f1c3fd782d..d96092b35936 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -7148,6 +7148,8 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .check_intercept = svm_check_intercept, .handle_external_intr = svm_handle_external_intr, + .request_immediate_exit = __kvm_request_immediate_exit, + .sched_in = svm_sched_in, .pmu_ops = &amd_pmu_ops, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 62670b2f6d48..a4a1585f47f1 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1020,6 +1020,8 @@ struct vcpu_vmx { int ple_window; bool ple_window_dirty; + bool req_immediate_exit; + /* Support for PML */ #define PML_ENTITY_NUM 512 struct page *pml_pg; @@ -2865,6 +2867,8 @@ static void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu) u16 fs_sel, gs_sel; int i; + vmx->req_immediate_exit = false; + if (vmx->loaded_cpu_state) return; @@ -7967,6 +7971,9 @@ static __init int hardware_setup(void) kvm_x86_ops->enable_log_dirty_pt_masked = NULL; } + if (!cpu_has_vmx_preemption_timer()) + kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit; + if (cpu_has_vmx_preemption_timer() && enable_preemption_timer) { u64 vmx_msr; @@ -9209,7 +9216,8 @@ static int handle_pml_full(struct kvm_vcpu *vcpu) static int handle_preemption_timer(struct kvm_vcpu *vcpu) { - kvm_lapic_expired_hv_timer(vcpu); + if (!to_vmx(vcpu)->req_immediate_exit) + kvm_lapic_expired_hv_timer(vcpu); return 1; } @@ -10611,6 +10619,11 @@ static void vmx_update_hv_timer(struct kvm_vcpu *vcpu) u64 tscl; u32 delta_tsc; + if (vmx->req_immediate_exit) { + vmx_arm_hv_timer(vmx, 0); + return; + } + if (vmx->hv_deadline_tsc != -1) { tscl = rdtsc(); if (vmx->hv_deadline_tsc > tscl) @@ -12879,6 +12892,11 @@ static int vmx_check_nested_events(struct kvm_vcpu *vcpu, bool external_intr) return 0; } +static void vmx_request_immediate_exit(struct kvm_vcpu *vcpu) +{ + to_vmx(vcpu)->req_immediate_exit = true; +} + static u32 vmx_get_preemption_timer_value(struct kvm_vcpu *vcpu) { ktime_t remaining = @@ -14135,6 +14153,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .umip_emulated = vmx_umip_emulated, .check_nested_events = vmx_check_nested_events, + .request_immediate_exit = vmx_request_immediate_exit, .sched_in = vmx_sched_in, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5c870203737f..9d0fda9056de 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7361,6 +7361,12 @@ void kvm_vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_vcpu_reload_apic_access_page); +void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu) +{ + smp_send_reschedule(vcpu->cpu); +} +EXPORT_SYMBOL_GPL(__kvm_request_immediate_exit); + /* * Returns 1 to let vcpu_run() continue the guest execution loop without * exiting to the userspace. Otherwise, the value will be returned to the @@ -7565,7 +7571,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) if (req_immediate_exit) { kvm_make_request(KVM_REQ_EVENT, vcpu); - smp_send_reschedule(vcpu->cpu); + kvm_x86_ops->request_immediate_exit(vcpu); } trace_kvm_entry(vcpu->vcpu_id); -- cgit v1.2.3-59-g8ed1b From a1efa9b70097a7ebb7c0a10bb72648776771b281 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Mon, 27 Aug 2018 18:48:57 +0200 Subject: x86/hyper-v: rename ipi_arg_{ex,non_ex} structures These structures are going to be used from KVM code so let's make their names reflect their Hyper-V origin. Signed-off-by: Vitaly Kuznetsov Reviewed-by: Roman Kagan Acked-by: K. Y. Srinivasan Signed-off-by: Paolo Bonzini --- arch/x86/hyperv/hv_apic.c | 8 ++++---- arch/x86/include/asm/hyperv-tlfs.h | 16 +++++++++------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index 5b0f613428c2..2c43e3055948 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -95,8 +95,8 @@ static void hv_apic_eoi_write(u32 reg, u32 val) */ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector) { - struct ipi_arg_ex **arg; - struct ipi_arg_ex *ipi_arg; + struct hv_send_ipi_ex **arg; + struct hv_send_ipi_ex *ipi_arg; unsigned long flags; int nr_bank = 0; int ret = 1; @@ -105,7 +105,7 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector) return false; local_irq_save(flags); - arg = (struct ipi_arg_ex **)this_cpu_ptr(hyperv_pcpu_input_arg); + arg = (struct hv_send_ipi_ex **)this_cpu_ptr(hyperv_pcpu_input_arg); ipi_arg = *arg; if (unlikely(!ipi_arg)) @@ -135,7 +135,7 @@ ipi_mask_ex_done: static bool __send_ipi_mask(const struct cpumask *mask, int vector) { int cur_cpu, vcpu; - struct ipi_arg_non_ex ipi_arg; + struct hv_send_ipi ipi_arg; int ret = 1; trace_hyperv_send_ipi_mask(mask, vector); diff --git a/arch/x86/include/asm/hyperv-tlfs.h b/arch/x86/include/asm/hyperv-tlfs.h index e977b6b3a538..00e01d215f74 100644 --- a/arch/x86/include/asm/hyperv-tlfs.h +++ b/arch/x86/include/asm/hyperv-tlfs.h @@ -726,19 +726,21 @@ struct hv_enlightened_vmcs { #define HV_STIMER_AUTOENABLE (1ULL << 3) #define HV_STIMER_SINT(config) (__u8)(((config) >> 16) & 0x0F) -struct ipi_arg_non_ex { - u32 vector; - u32 reserved; - u64 cpu_mask; -}; - struct hv_vpset { u64 format; u64 valid_bank_mask; u64 bank_contents[]; }; -struct ipi_arg_ex { +/* HvCallSendSyntheticClusterIpi hypercall */ +struct hv_send_ipi { + u32 vector; + u32 reserved; + u64 cpu_mask; +}; + +/* HvCallSendSyntheticClusterIpiEx hypercall */ +struct hv_send_ipi_ex { u32 vector; u32 reserved; struct hv_vpset vp_set; -- cgit v1.2.3-59-g8ed1b From 822f312d47f0200dc0999c9f006fe94aa43bd0bd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 12 Sep 2018 15:33:45 +0200 Subject: kvm: x86: make kvm_{load|put}_guest_fpu() static The functions kvm_load_guest_fpu() kvm_put_guest_fpu() are only used locally, make them static. This requires also that both functions are moved because they are used before their implementation. Those functions were exported (via EXPORT_SYMBOL) before commit e5bb40251a920 ("KVM: Drop kvm_{load,put}_guest_fpu() exports"). Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 46 +++++++++++++++++++++++----------------------- include/linux/kvm_host.h | 2 -- 2 files changed, 23 insertions(+), 25 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9d0fda9056de..6f4789398876 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7835,6 +7835,29 @@ static int complete_emulated_mmio(struct kvm_vcpu *vcpu) return 0; } +/* Swap (qemu) user FPU context for the guest FPU context. */ +static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu) +{ + preempt_disable(); + copy_fpregs_to_fpstate(&vcpu->arch.user_fpu); + /* PKRU is separately restored in kvm_x86_ops->run. */ + __copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state, + ~XFEATURE_MASK_PKRU); + preempt_enable(); + trace_kvm_fpu(1); +} + +/* When vcpu_run ends, restore user space FPU context. */ +static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) +{ + preempt_disable(); + copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu); + copy_kernel_to_fpregs(&vcpu->arch.user_fpu.state); + preempt_enable(); + ++vcpu->stat.fpu_reload; + trace_kvm_fpu(0); +} + int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) { int r; @@ -8412,29 +8435,6 @@ static void fx_init(struct kvm_vcpu *vcpu) vcpu->arch.cr0 |= X86_CR0_ET; } -/* Swap (qemu) user FPU context for the guest FPU context. */ -void kvm_load_guest_fpu(struct kvm_vcpu *vcpu) -{ - preempt_disable(); - copy_fpregs_to_fpstate(&vcpu->arch.user_fpu); - /* PKRU is separately restored in kvm_x86_ops->run. */ - __copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state, - ~XFEATURE_MASK_PKRU); - preempt_enable(); - trace_kvm_fpu(1); -} - -/* When vcpu_run ends, restore user space FPU context. */ -void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) -{ - preempt_disable(); - copy_fpregs_to_fpstate(&vcpu->arch.guest_fpu); - copy_kernel_to_fpregs(&vcpu->arch.user_fpu.state); - preempt_enable(); - ++vcpu->stat.fpu_reload; - trace_kvm_fpu(0); -} - void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { void *wbinvd_dirty_mask = vcpu->arch.wbinvd_dirty_mask; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 0205aee44ded..c926698040e0 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -733,8 +733,6 @@ bool kvm_vcpu_wake_up(struct kvm_vcpu *vcpu); void kvm_vcpu_kick(struct kvm_vcpu *vcpu); int kvm_vcpu_yield_to(struct kvm_vcpu *target); void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu, bool usermode_vcpu_not_eligible); -void kvm_load_guest_fpu(struct kvm_vcpu *vcpu); -void kvm_put_guest_fpu(struct kvm_vcpu *vcpu); void kvm_flush_remote_tlbs(struct kvm *kvm); void kvm_reload_remote_mmus(struct kvm *kvm); -- cgit v1.2.3-59-g8ed1b From 5bea5123cbf08f990a1aee8f08c643a272e06a0f Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 18 Sep 2018 15:19:17 +0200 Subject: KVM: VMX: check nested state and CR4.VMXE against SMM VMX cannot be enabled under SMM, check it when CR4 is set and when nested virtualization state is restored. This should fix some WARNs reported by syzkaller, mostly around alloc_shadow_vmcs. Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index a4a1585f47f1..16e63a92992f 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -5398,9 +5398,10 @@ static int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) * To use VMXON (and later other VMX instructions), a guest * must first be able to turn on cr4.VMXE (see handle_vmon()). * So basically the check on whether to allow nested VMX - * is here. + * is here. We operate under the default treatment of SMM, + * so VMX cannot be enabled under SMM. */ - if (!nested_vmx_allowed(vcpu)) + if (!nested_vmx_allowed(vcpu) || is_smm(vcpu)) return 1; } @@ -13977,6 +13978,14 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu, ~(KVM_STATE_NESTED_SMM_GUEST_MODE | KVM_STATE_NESTED_SMM_VMXON)) return -EINVAL; + /* + * SMM temporarily disables VMX, so we cannot be in guest mode, + * nor can VMLAUNCH/VMRESUME be pending. Outside SMM, SMM flags + * must be zero. + */ + if (is_smm(vcpu) ? kvm_state->flags : kvm_state->vmx.smm.flags) + return -EINVAL; + if ((kvm_state->vmx.smm.flags & KVM_STATE_NESTED_SMM_GUEST_MODE) && !(kvm_state->vmx.smm.flags & KVM_STATE_NESTED_SMM_VMXON)) return -EINVAL; -- cgit v1.2.3-59-g8ed1b From e6c67d8cf1173b229f0c4343d1cc7925eca11c11 Mon Sep 17 00:00:00 2001 From: Liran Alon Date: Tue, 4 Sep 2018 10:56:52 +0300 Subject: KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv In case L1 do not intercept L2 HLT or enter L2 in HLT activity-state, it is possible for a vCPU to be blocked while it is in guest-mode. According to Intel SDM 26.6.5 Interrupt-Window Exiting and Virtual-Interrupt Delivery: "These events wake the logical processor if it just entered the HLT state because of a VM entry". Therefore, if L1 enters L2 in HLT activity-state and L2 has a pending deliverable interrupt in vmcs12->guest_intr_status.RVI, then the vCPU should be waken from the HLT state and injected with the interrupt. In addition, if while the vCPU is blocked (while it is in guest-mode), it receives a nested posted-interrupt, then the vCPU should also be waken and injected with the posted interrupt. To handle these cases, this patch enhances kvm_vcpu_has_events() to also check if there is a pending interrupt in L2 virtual APICv provided by L1. That is, it evaluates if there is a pending virtual interrupt for L2 by checking RVI[7:4] > VPPR[7:4] as specified in Intel SDM 29.2.1 Evaluation of Pending Interrupts. Note that this also handles the case of nested posted-interrupt by the fact RVI is updated in vmx_complete_nested_posted_interrupt() which is called from kvm_vcpu_check_block() -> kvm_arch_vcpu_runnable() -> kvm_vcpu_running() -> vmx_check_nested_events() -> vmx_complete_nested_posted_interrupt(). Reviewed-by: Nikita Leshenko Reviewed-by: Darren Kenny Signed-off-by: Liran Alon Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/vmx.c | 22 ++++++++++++++++++++++ arch/x86/kvm/x86.c | 10 +++++++++- 3 files changed, 32 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index bffb25b50425..af63c2ca1616 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1022,6 +1022,7 @@ struct kvm_x86_ops { void (*refresh_apicv_exec_ctrl)(struct kvm_vcpu *vcpu); void (*hwapic_irr_update)(struct kvm_vcpu *vcpu, int max_irr); void (*hwapic_isr_update)(struct kvm_vcpu *vcpu, int isr); + bool (*guest_apic_has_interrupt)(struct kvm_vcpu *vcpu); void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap); void (*set_virtual_apic_mode)(struct kvm_vcpu *vcpu); void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu, hpa_t hpa); diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 16e63a92992f..98b1203e8823 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6189,6 +6189,27 @@ static void vmx_complete_nested_posted_interrupt(struct kvm_vcpu *vcpu) nested_mark_vmcs12_pages_dirty(vcpu); } +static bool vmx_guest_apic_has_interrupt(struct kvm_vcpu *vcpu) +{ + struct vcpu_vmx *vmx = to_vmx(vcpu); + void *vapic_page; + u32 vppr; + int rvi; + + if (WARN_ON_ONCE(!is_guest_mode(vcpu)) || + !nested_cpu_has_vid(get_vmcs12(vcpu)) || + WARN_ON_ONCE(!vmx->nested.virtual_apic_page)) + return false; + + rvi = vmcs_read16(GUEST_INTR_STATUS) & 0xff; + + vapic_page = kmap(vmx->nested.virtual_apic_page); + vppr = *((u32 *)(vapic_page + APIC_PROCPRI)); + kunmap(vmx->nested.virtual_apic_page); + + return ((rvi & 0xf0) > (vppr & 0xf0)); +} + static inline bool kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu, bool nested) { @@ -14129,6 +14150,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .apicv_post_state_restore = vmx_apicv_post_state_restore, .hwapic_irr_update = vmx_hwapic_irr_update, .hwapic_isr_update = vmx_hwapic_isr_update, + .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt, .sync_pir_to_irr = vmx_sync_pir_to_irr, .deliver_posted_interrupt = vmx_deliver_posted_interrupt, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 6f4789398876..5fea53cdc583 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9206,6 +9206,13 @@ void kvm_arch_flush_shadow_memslot(struct kvm *kvm, kvm_page_track_flush_slot(kvm, slot); } +static inline bool kvm_guest_apic_has_interrupt(struct kvm_vcpu *vcpu) +{ + return (is_guest_mode(vcpu) && + kvm_x86_ops->guest_apic_has_interrupt && + kvm_x86_ops->guest_apic_has_interrupt(vcpu)); +} + static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu) { if (!list_empty_careful(&vcpu->async_pf.done)) @@ -9230,7 +9237,8 @@ static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu) return true; if (kvm_arch_interrupt_allowed(vcpu) && - kvm_cpu_has_interrupt(vcpu)) + (kvm_cpu_has_interrupt(vcpu) || + kvm_guest_apic_has_interrupt(vcpu))) return true; if (kvm_hv_has_stimer_pending(vcpu)) -- cgit v1.2.3-59-g8ed1b From 6de84e581c083c4357b45c31b7ef71335725d850 Mon Sep 17 00:00:00 2001 From: Krish Sadhukhan Date: Thu, 23 Aug 2018 20:03:03 -0400 Subject: nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2 According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check needs to be enforced on vmentry of L2 guests: - Bits 5:0 of the posted-interrupt descriptor address are all 0. - The posted-interrupt descriptor address does not set any bits beyond the processor's physical-address width. Signed-off-by: Krish Sadhukhan Reviewed-by: Mark Kanda Reviewed-by: Liran Alon Reviewed-by: Darren Kenny Reviewed-by: Karl Heubaum Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 98b1203e8823..581bdbd9844b 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11698,11 +11698,15 @@ static int nested_vmx_check_apicv_controls(struct kvm_vcpu *vcpu, * bits 15:8 should be zero in posted_intr_nv, * the descriptor address has been already checked * in nested_get_vmcs12_pages. + * + * bits 5:0 of posted_intr_desc_addr should be zero. */ if (nested_cpu_has_posted_intr(vmcs12) && (!nested_cpu_has_vid(vmcs12) || !nested_exit_intr_ack_set(vcpu) || - vmcs12->posted_intr_nv & 0xff00)) + (vmcs12->posted_intr_nv & 0xff00) || + (vmcs12->posted_intr_desc_addr & 0x3f) || + (!page_address_valid(vcpu, vmcs12->posted_intr_desc_addr)))) return -EINVAL; /* tpr shadow is needed by all apicv features. */ -- cgit v1.2.3-59-g8ed1b From ba8e23db59dc07e5de74fd7bd310e297d3e4ba54 Mon Sep 17 00:00:00 2001 From: Krish Sadhukhan Date: Tue, 4 Sep 2018 14:42:58 -0400 Subject: nVMX x86: Check VPID value on vmentry of L2 guests According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following check needs to be enforced on vmentry of L2 guests: If the 'enable VPID' VM-execution control is 1, the value of the of the VPID VM-execution control field must not be 0000H. Signed-off-by: Krish Sadhukhan Reviewed-by: Mark Kanda Reviewed-by: Liran Alon Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 581bdbd9844b..06412ba46aa3 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -12373,6 +12373,9 @@ static int check_vmentry_prereqs(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) vmcs12->guest_activity_state != GUEST_ACTIVITY_HLT) return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + if (nested_cpu_has_vpid(vmcs12) && !vmcs12->virtual_processor_id) + return VMXERR_ENTRY_INVALID_CONTROL_FIELD; + if (nested_vmx_check_io_bitmap_controls(vcpu, vmcs12)) return VMXERR_ENTRY_INVALID_CONTROL_FIELD; -- cgit v1.2.3-59-g8ed1b From d84f1cff9028c00ee870f0293b0c7a3866071dfa Mon Sep 17 00:00:00 2001 From: Drew Schmitt Date: Mon, 20 Aug 2018 10:32:14 -0700 Subject: KVM: x86: Turbo bits in MSR_PLATFORM_INFO Allow userspace to set turbo bits in MSR_PLATFORM_INFO. Previously, only the CPUID faulting bit was settable. But now any bit in MSR_PLATFORM_INFO would be settable. This can be used, for example, to convey frequency information about the platform on which the guest is running. Signed-off-by: Drew Schmitt Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5fea53cdc583..e127703e277e 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2537,7 +2537,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) break; case MSR_PLATFORM_INFO: if (!msr_info->host_initiated || - data & ~MSR_PLATFORM_INFO_CPUID_FAULT || (!(data & MSR_PLATFORM_INFO_CPUID_FAULT) && cpuid_fault_enabled(vcpu))) return 1; -- cgit v1.2.3-59-g8ed1b From 6fbbde9a1969dfb476467ebf69a475095ef3fd4d Mon Sep 17 00:00:00 2001 From: Drew Schmitt Date: Mon, 20 Aug 2018 10:32:15 -0700 Subject: KVM: x86: Control guest reads of MSR_PLATFORM_INFO Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access to reads of MSR_PLATFORM_INFO. Disabling access to reads of this MSR gives userspace the control to "expose" this platform-dependent information to guests in a clear way. As it exists today, guests that read this MSR would get unpopulated information if userspace hadn't already set it (and prior to this patch series, only the CPUID faulting information could have been populated). This existing interface could be confusing if guests don't handle the potential for incorrect/incomplete information gracefully (e.g. zero reported for base frequency). Signed-off-by: Drew Schmitt Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/api.txt | 9 +++++++++ arch/x86/include/asm/kvm_host.h | 2 ++ arch/x86/kvm/x86.c | 10 ++++++++++ include/uapi/linux/kvm.h | 1 + 4 files changed, 22 insertions(+) diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 8d8a372c8340..647f94128a85 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -4522,6 +4522,15 @@ hpage module parameter is not set to 1, -EINVAL is returned. While it is generally possible to create a huge page backed VM without this capability, the VM will not be able to run. +7.14 KVM_CAP_MSR_PLATFORM_INFO + +Architectures: x86 +Parameters: args[0] whether feature should be enabled or not + +With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise, +a #GP would be raised when the guest tries to access. Currently, this +capability does not enable write permissions of this MSR for the guest. + 8. Other capabilities. ---------------------- diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index af63c2ca1616..09b2e3e2cf1b 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -869,6 +869,8 @@ struct kvm_arch { bool x2apic_format; bool x2apic_broadcast_quirk_disabled; + + bool guest_can_read_msr_platform_info; }; struct kvm_vm_stat { diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e127703e277e..4c39ec5fc4fe 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2779,6 +2779,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) msr_info->data = vcpu->arch.osvw.status; break; case MSR_PLATFORM_INFO: + if (!msr_info->host_initiated && + !vcpu->kvm->arch.guest_can_read_msr_platform_info) + return 1; msr_info->data = vcpu->arch.msr_platform_info; break; case MSR_MISC_FEATURES_ENABLES: @@ -2926,6 +2929,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_SPLIT_IRQCHIP: case KVM_CAP_IMMEDIATE_EXIT: case KVM_CAP_GET_MSR_FEATURES: + case KVM_CAP_MSR_PLATFORM_INFO: r = 1; break; case KVM_CAP_SYNC_REGS: @@ -4349,6 +4353,10 @@ split_irqchip_unlock: kvm->arch.pause_in_guest = true; r = 0; break; + case KVM_CAP_MSR_PLATFORM_INFO: + kvm->arch.guest_can_read_msr_platform_info = cap->args[0]; + r = 0; + break; default: r = -EINVAL; break; @@ -8857,6 +8865,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) kvm->arch.kvmclock_offset = -ktime_get_boot_ns(); pvclock_update_vm_gtod_copy(kvm); + kvm->arch.guest_can_read_msr_platform_info = true; + INIT_DELAYED_WORK(&kvm->arch.kvmclock_update_work, kvmclock_update_fn); INIT_DELAYED_WORK(&kvm->arch.kvmclock_sync_work, kvmclock_sync_fn); diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 07548de5c988..251be353f950 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -952,6 +952,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_HPAGE_1M 156 #define KVM_CAP_NESTED_STATE 157 #define KVM_CAP_ARM_INJECT_SERROR_ESR 158 +#define KVM_CAP_MSR_PLATFORM_INFO 159 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.2.3-59-g8ed1b From 8b56ee91ffc88ea01400c012e10fe22a9d233265 Mon Sep 17 00:00:00 2001 From: Drew Schmitt Date: Mon, 20 Aug 2018 10:32:16 -0700 Subject: kvm: selftests: Add platform_info_test Test guest access to MSR_PLATFORM_INFO when the capability is enabled or disabled. Signed-off-by: Drew Schmitt Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/.gitignore | 1 + tools/testing/selftests/kvm/Makefile | 3 +- tools/testing/selftests/kvm/include/kvm_util.h | 4 + tools/testing/selftests/kvm/lib/kvm_util.c | 89 ++++++++++++++++++ tools/testing/selftests/kvm/platform_info_test.c | 110 +++++++++++++++++++++++ 5 files changed, 206 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/platform_info_test.c diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 4202139d81d9..5c34752e1cff 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -1,4 +1,5 @@ cr4_cpuid_sync_test +platform_info_test set_sregs_test sync_regs_test vmx_tsc_adjust_test diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 48c970c90353..37e4bd8619a6 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -6,7 +6,8 @@ UNAME_M := $(shell uname -m) LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/sparsebit.c LIBKVM_x86_64 = lib/x86.c lib/vmx.c -TEST_GEN_PROGS_x86_64 = set_sregs_test +TEST_GEN_PROGS_x86_64 = platform_info_test +TEST_GEN_PROGS_x86_64 += set_sregs_test TEST_GEN_PROGS_x86_64 += sync_regs_test TEST_GEN_PROGS_x86_64 += vmx_tsc_adjust_test TEST_GEN_PROGS_x86_64 += cr4_cpuid_sync_test diff --git a/tools/testing/selftests/kvm/include/kvm_util.h b/tools/testing/selftests/kvm/include/kvm_util.h index bb5a25fb82c6..3acf9a91704c 100644 --- a/tools/testing/selftests/kvm/include/kvm_util.h +++ b/tools/testing/selftests/kvm/include/kvm_util.h @@ -50,6 +50,7 @@ enum vm_mem_backing_src_type { }; int kvm_check_cap(long cap); +int vm_enable_cap(struct kvm_vm *vm, struct kvm_enable_cap *cap); struct kvm_vm *vm_create(enum vm_guest_mode mode, uint64_t phy_pages, int perm); void kvm_vm_free(struct kvm_vm *vmp); @@ -108,6 +109,9 @@ void vcpu_events_get(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_events *events); void vcpu_events_set(struct kvm_vm *vm, uint32_t vcpuid, struct kvm_vcpu_events *events); +uint64_t vcpu_get_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index); +void vcpu_set_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index, + uint64_t msr_value); const char *exit_reason_str(unsigned int exit_reason); diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c index e9ba389c48db..6fd8c089cafc 100644 --- a/tools/testing/selftests/kvm/lib/kvm_util.c +++ b/tools/testing/selftests/kvm/lib/kvm_util.c @@ -63,6 +63,29 @@ int kvm_check_cap(long cap) return ret; } +/* VM Enable Capability + * + * Input Args: + * vm - Virtual Machine + * cap - Capability + * + * Output Args: None + * + * Return: On success, 0. On failure a TEST_ASSERT failure is produced. + * + * Enables a capability (KVM_CAP_*) on the VM. + */ +int vm_enable_cap(struct kvm_vm *vm, struct kvm_enable_cap *cap) +{ + int ret; + + ret = ioctl(vm->fd, KVM_ENABLE_CAP, cap); + TEST_ASSERT(ret == 0, "KVM_ENABLE_CAP IOCTL failed,\n" + " rc: %i errno: %i", ret, errno); + + return ret; +} + static void vm_open(struct kvm_vm *vm, int perm) { vm->kvm_fd = open(KVM_DEV_PATH, perm); @@ -1220,6 +1243,72 @@ void vcpu_events_set(struct kvm_vm *vm, uint32_t vcpuid, ret, errno); } +/* VCPU Get MSR + * + * Input Args: + * vm - Virtual Machine + * vcpuid - VCPU ID + * msr_index - Index of MSR + * + * Output Args: None + * + * Return: On success, value of the MSR. On failure a TEST_ASSERT is produced. + * + * Get value of MSR for VCPU. + */ +uint64_t vcpu_get_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index) +{ + struct vcpu *vcpu = vcpu_find(vm, vcpuid); + struct { + struct kvm_msrs header; + struct kvm_msr_entry entry; + } buffer = {}; + int r; + + TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid); + buffer.header.nmsrs = 1; + buffer.entry.index = msr_index; + r = ioctl(vcpu->fd, KVM_GET_MSRS, &buffer.header); + TEST_ASSERT(r == 1, "KVM_GET_MSRS IOCTL failed,\n" + " rc: %i errno: %i", r, errno); + + return buffer.entry.data; +} + +/* VCPU Set MSR + * + * Input Args: + * vm - Virtual Machine + * vcpuid - VCPU ID + * msr_index - Index of MSR + * msr_value - New value of MSR + * + * Output Args: None + * + * Return: On success, nothing. On failure a TEST_ASSERT is produced. + * + * Set value of MSR for VCPU. + */ +void vcpu_set_msr(struct kvm_vm *vm, uint32_t vcpuid, uint64_t msr_index, + uint64_t msr_value) +{ + struct vcpu *vcpu = vcpu_find(vm, vcpuid); + struct { + struct kvm_msrs header; + struct kvm_msr_entry entry; + } buffer = {}; + int r; + + TEST_ASSERT(vcpu != NULL, "vcpu not found, vcpuid: %u", vcpuid); + memset(&buffer, 0, sizeof(buffer)); + buffer.header.nmsrs = 1; + buffer.entry.index = msr_index; + buffer.entry.data = msr_value; + r = ioctl(vcpu->fd, KVM_SET_MSRS, &buffer.header); + TEST_ASSERT(r == 1, "KVM_SET_MSRS IOCTL failed,\n" + " rc: %i errno: %i", r, errno); +} + /* VM VCPU Args Set * * Input Args: diff --git a/tools/testing/selftests/kvm/platform_info_test.c b/tools/testing/selftests/kvm/platform_info_test.c new file mode 100644 index 000000000000..3764e7121265 --- /dev/null +++ b/tools/testing/selftests/kvm/platform_info_test.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Test for x86 KVM_CAP_MSR_PLATFORM_INFO + * + * Copyright (C) 2018, Google LLC. + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * Verifies expected behavior of controlling guest access to + * MSR_PLATFORM_INFO. + */ + +#define _GNU_SOURCE /* for program_invocation_short_name */ +#include +#include +#include +#include +#include + +#include "test_util.h" +#include "kvm_util.h" +#include "x86.h" + +#define VCPU_ID 0 +#define MSR_PLATFORM_INFO_MAX_TURBO_RATIO 0xff00 + +static void guest_code(void) +{ + uint64_t msr_platform_info; + + for (;;) { + msr_platform_info = rdmsr(MSR_PLATFORM_INFO); + GUEST_SYNC(msr_platform_info); + asm volatile ("inc %r11"); + } +} + +static void set_msr_platform_info_enabled(struct kvm_vm *vm, bool enable) +{ + struct kvm_enable_cap cap = {}; + + cap.cap = KVM_CAP_MSR_PLATFORM_INFO; + cap.flags = 0; + cap.args[0] = (int)enable; + vm_enable_cap(vm, &cap); +} + +static void test_msr_platform_info_enabled(struct kvm_vm *vm) +{ + struct kvm_run *run = vcpu_state(vm, VCPU_ID); + struct guest_args args; + + set_msr_platform_info_enabled(vm, true); + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, + "Exit_reason other than KVM_EXIT_IO: %u (%s),\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); + guest_args_read(vm, VCPU_ID, &args); + TEST_ASSERT(args.port == GUEST_PORT_SYNC, + "Received IO from port other than PORT_HOST_SYNC: %u\n", + run->io.port); + TEST_ASSERT((args.arg1 & MSR_PLATFORM_INFO_MAX_TURBO_RATIO) == + MSR_PLATFORM_INFO_MAX_TURBO_RATIO, + "Expected MSR_PLATFORM_INFO to have max turbo ratio mask: %i.", + MSR_PLATFORM_INFO_MAX_TURBO_RATIO); +} + +static void test_msr_platform_info_disabled(struct kvm_vm *vm) +{ + struct kvm_run *run = vcpu_state(vm, VCPU_ID); + + set_msr_platform_info_enabled(vm, false); + vcpu_run(vm, VCPU_ID); + TEST_ASSERT(run->exit_reason == KVM_EXIT_SHUTDOWN, + "Exit_reason other than KVM_EXIT_SHUTDOWN: %u (%s)\n", + run->exit_reason, + exit_reason_str(run->exit_reason)); +} + +int main(int argc, char *argv[]) +{ + struct kvm_vm *vm; + struct kvm_run *state; + int rv; + uint64_t msr_platform_info; + + /* Tell stdout not to buffer its content */ + setbuf(stdout, NULL); + + rv = kvm_check_cap(KVM_CAP_MSR_PLATFORM_INFO); + if (!rv) { + fprintf(stderr, + "KVM_CAP_MSR_PLATFORM_INFO not supported, skip test\n"); + exit(KSFT_SKIP); + } + + vm = vm_create_default(VCPU_ID, 0, guest_code); + + msr_platform_info = vcpu_get_msr(vm, VCPU_ID, MSR_PLATFORM_INFO); + vcpu_set_msr(vm, VCPU_ID, MSR_PLATFORM_INFO, + msr_platform_info | MSR_PLATFORM_INFO_MAX_TURBO_RATIO); + test_msr_platform_info_disabled(vm); + test_msr_platform_info_enabled(vm); + vcpu_set_msr(vm, VCPU_ID, MSR_PLATFORM_INFO, msr_platform_info); + + kvm_vm_free(vm); + + return 0; +} -- cgit v1.2.3-59-g8ed1b From 30f3984ede683b98a4e8096e200df78bf0609b4f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Sep 2018 15:28:24 -0500 Subject: drm/amdgpu: add new polaris pci id Add new pci id. Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 14 ++++++++------ drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 + 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 693ec5ea4950..8816c697b205 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -367,12 +367,14 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, break; case CHIP_POLARIS10: if (type == CGS_UCODE_ID_SMU) { - if ((adev->pdev->device == 0x67df) && - ((adev->pdev->revision == 0xe0) || - (adev->pdev->revision == 0xe3) || - (adev->pdev->revision == 0xe4) || - (adev->pdev->revision == 0xe5) || - (adev->pdev->revision == 0xe7) || + if (((adev->pdev->device == 0x67df) && + ((adev->pdev->revision == 0xe0) || + (adev->pdev->revision == 0xe3) || + (adev->pdev->revision == 0xe4) || + (adev->pdev->revision == 0xe5) || + (adev->pdev->revision == 0xe7) || + (adev->pdev->revision == 0xef))) || + ((adev->pdev->device == 0x6fdf) && (adev->pdev->revision == 0xef))) { info->is_kicker = true; strcpy(fw_name, "amdgpu/polaris10_k_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 8843a06360fa..0f41d8647376 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -740,6 +740,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x67CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, + {0x1002, 0x6FDF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, /* Polaris12 */ {0x1002, 0x6980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0x1002, 0x6981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, -- cgit v1.2.3-59-g8ed1b From 76c0ddd8c3a683f6e2c6e60e11dc1a1558caf4bc Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 19 Sep 2018 15:02:07 +0200 Subject: ip6_tunnel: be careful when accessing the inner header the ip6 tunnel xmit ndo assumes that the processed skb always contains an ip[v6] header, but syzbot has found a way to send frames that fall short of this assumption, leading to the following splat: BUG: KMSAN: uninit-value in ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] BUG: KMSAN: uninit-value in ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 CPU: 0 PID: 4504 Comm: syz-executor558 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6ip6_tnl_xmit net/ipv6/ip6_tunnel.c:1307 [inline] ip6_tnl_start_xmit+0x7d2/0x1ef0 net/ipv6/ip6_tunnel.c:1390 __netdev_start_xmit include/linux/netdevice.h:4066 [inline] netdev_start_xmit include/linux/netdevice.h:4075 [inline] xmit_one net/core/dev.c:3026 [inline] dev_hard_start_xmit+0x5f1/0xc70 net/core/dev.c:3042 __dev_queue_xmit+0x27ee/0x3520 net/core/dev.c:3557 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c70/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x441819 RSP: 002b:00007ffe58ee8268 EFLAGS: 00000213 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441819 RDX: 0000000000000002 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cd018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000402510 R13: 00000000004025a0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6454/0x8a30 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmmsg+0x42d/0x800 net/socket.c:2136 SYSC_sendmmsg+0xc4/0x110 net/socket.c:2167 SyS_sendmmsg+0x63/0x90 net/socket.c:2162 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 This change addresses the issue adding the needed check before accessing the inner header. The ipv4 side of the issue is apparently there since the ipv4 over ipv6 initial support, and the ipv6 side predates git history. Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+3fde91d4d394747d6db4@syzkaller.appspotmail.com Tested-by: Alexander Potapenko Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 419960b0ba16..a0b6932c3afd 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1234,7 +1234,7 @@ static inline int ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ip6_tnl *t = netdev_priv(dev); - const struct iphdr *iph = ip_hdr(skb); + const struct iphdr *iph; int encap_limit = -1; struct flowi6 fl6; __u8 dsfield; @@ -1242,6 +1242,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) u8 tproto; int err; + /* ensure we can access the full inner ip header */ + if (!pskb_may_pull(skb, sizeof(struct iphdr))) + return -1; + + iph = ip_hdr(skb); memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); tproto = READ_ONCE(t->parms.proto); @@ -1306,7 +1311,7 @@ static inline int ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) { struct ip6_tnl *t = netdev_priv(dev); - struct ipv6hdr *ipv6h = ipv6_hdr(skb); + struct ipv6hdr *ipv6h; int encap_limit = -1; __u16 offset; struct flowi6 fl6; @@ -1315,6 +1320,10 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) u8 tproto; int err; + if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h)))) + return -1; + + ipv6h = ipv6_hdr(skb); tproto = READ_ONCE(t->parms.proto); if ((tproto != IPPROTO_IPV6 && tproto != 0) || ip6_tnl_addr_conflict(t, ipv6h)) -- cgit v1.2.3-59-g8ed1b From cf5cca6e4cc4dea604d8c83e7676f10459d6809c Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 19 Sep 2018 15:29:06 +0200 Subject: net: mvneta: fix the Rx desc buffer DMA unmapping With CONFIG_DMA_API_DEBUG enabled we now get a warning when using the mvneta driver: mvneta d0030000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001165b000] [size=4096 bytes] [mapped as page] [unmapped as single] This is because when using the s/w buffer management, the Rx descriptor buffer is mapped with dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index bc80a678abc3..2db9708f2e24 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2008,8 +2008,8 @@ static int mvneta_rx_swbm(struct napi_struct *napi, skb_add_rx_frag(rxq->skb, frag_num, page, frag_offset, frag_size, PAGE_SIZE); - dma_unmap_single(dev->dev.parent, phys_addr, - PAGE_SIZE, DMA_FROM_DEVICE); + dma_unmap_page(dev->dev.parent, phys_addr, + PAGE_SIZE, DMA_FROM_DEVICE); rxq->left_size -= frag_size; } } else { -- cgit v1.2.3-59-g8ed1b From 7233b8cab39014620ac9534da11f0f3e506d8fd8 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 11 Sep 2018 15:38:05 +1000 Subject: powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again) mpe: This was fixed originally in commit d3d4ffaae439 ("powerpc/powernv/ioda2: Reduce upper limit for DMA window size"), but contrary to what the merge commit says was inadvertently lost by me in commit ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next") which brought in changes that moved the code to a new file. So reapply it to the new file. Original commit message follows: We use PHB in mode1 which uses bit 59 to select a correct DMA window. However there is mode2 which uses bits 59:55 and allows up to 32 DMA windows per a PE. Even though documentation does not clearly specify that, it seems that the actual hardware does not support bits 59:55 even in mode1, in other words we can create a window as big as 1<<58 but DMA simply won't work. This reduces the upper limit from 59 to 55 bits to let the userspace know about the hardware limits. Fixes: ce57c6610cc2 ("Merge branch 'topic/ppc-kvm' into next") Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/pci-ioda-tce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powernv/pci-ioda-tce.c b/arch/powerpc/platforms/powernv/pci-ioda-tce.c index 6c5db1acbe8d..fe9691040f54 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c +++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c @@ -276,7 +276,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset, level_shift = entries_shift + 3; level_shift = max_t(unsigned int, level_shift, PAGE_SHIFT); - if ((level_shift - 3) * levels + page_shift >= 60) + if ((level_shift - 3) * levels + page_shift >= 55) return -EINVAL; /* Allocate TCE table */ -- cgit v1.2.3-59-g8ed1b From bfc888261474efb0676f0e1d128f22c9692b97b1 Mon Sep 17 00:00:00 2001 From: Deepak Rawat Date: Thu, 13 Sep 2018 12:33:49 +0200 Subject: drm/vmwgfx: don't check for old_crtc_state enable status During atomic check to prepare the new topology no need to check if old_crtc_state was enabled or not. This will cause atomic_check to fail because due to connector routing a crtc can be in atomic_state even if there was no change to enable status. Detected this issue with igt run. Signed-off-by: Deepak Rawat Reviewed-by: Sinclair Yeh Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 23beff5d8e3c..636b962849c8 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1615,7 +1615,7 @@ static int vmw_kms_check_topology(struct drm_device *dev, struct drm_connector_state *conn_state; struct vmw_connector_state *vmw_conn_state; - if (!new_crtc_state->enable && old_crtc_state->enable) { + if (!new_crtc_state->enable) { rects[i].x1 = 0; rects[i].y1 = 0; rects[i].x2 = 0; -- cgit v1.2.3-59-g8ed1b From 0c1b174b1b9a497230f937345d4db76fea267398 Mon Sep 17 00:00:00 2001 From: Deepak Rawat Date: Thu, 13 Sep 2018 12:34:37 +0200 Subject: drm/vmwgfx: limit screen size to stdu_max during check_modeset For STDU individual screen target size is limited by SVGA_REG_SCREENTARGET_MAX_WIDTH/HEIGHT registers so add that limit during atomic check_modeset. An additional limit is placed in the update_layout ioctl to avoid requesting layouts that current user-space typically can't support. Also modified the comments to reflect current limitation on topology. Signed-off-by: Deepak Rawat Reviewed-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 636b962849c8..12a41b039167 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1512,21 +1512,19 @@ static int vmw_kms_check_display_memory(struct drm_device *dev, struct drm_rect *rects) { struct vmw_private *dev_priv = vmw_priv(dev); - struct drm_mode_config *mode_config = &dev->mode_config; struct drm_rect bounding_box = {0}; u64 total_pixels = 0, pixel_mem, bb_mem; int i; for (i = 0; i < num_rects; i++) { /* - * Currently this check is limiting the topology within max - * texture/screentarget size. This should change in future when - * user-space support multiple fb with topology. + * For STDU only individual screen (screen target) is limited by + * SCREENTARGET_MAX_WIDTH/HEIGHT registers. */ - if (rects[i].x1 < 0 || rects[i].y1 < 0 || - rects[i].x2 > mode_config->max_width || - rects[i].y2 > mode_config->max_height) { - DRM_ERROR("Invalid GUI layout.\n"); + if (dev_priv->active_display_unit == vmw_du_screen_target && + (drm_rect_width(&rects[i]) > dev_priv->stdu_max_width || + drm_rect_height(&rects[i]) > dev_priv->stdu_max_height)) { + DRM_ERROR("Screen size not supported.\n"); return -EINVAL; } @@ -2376,6 +2374,7 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct vmw_private *dev_priv = vmw_priv(dev); + struct drm_mode_config *mode_config = &dev->mode_config; struct drm_vmw_update_layout_arg *arg = (struct drm_vmw_update_layout_arg *)data; void __user *user_rects; @@ -2421,6 +2420,21 @@ int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, drm_rects[i].y1 = curr_rect.y; drm_rects[i].x2 = curr_rect.x + curr_rect.w; drm_rects[i].y2 = curr_rect.y + curr_rect.h; + + /* + * Currently this check is limiting the topology within + * mode_config->max (which actually is max texture size + * supported by virtual device). This limit is here to address + * window managers that create a big framebuffer for whole + * topology. + */ + if (drm_rects[i].x1 < 0 || drm_rects[i].y1 < 0 || + drm_rects[i].x2 > mode_config->max_width || + drm_rects[i].y2 > mode_config->max_height) { + DRM_ERROR("Invalid GUI layout.\n"); + ret = -EINVAL; + goto out_free; + } } ret = vmw_kms_check_display_memory(dev, arg->num_outputs, drm_rects); -- cgit v1.2.3-59-g8ed1b From 140b4e67c2e1269a945c5caacdcb0c0346ad4cef Mon Sep 17 00:00:00 2001 From: Deepak Rawat Date: Thu, 13 Sep 2018 12:44:13 +0200 Subject: drm/vmwgfx: limit mode size for all display unit to texture_max For all display units, limit mode size exposed to texture_max_width/ height as this is the maximum framebuffer size that virtual device can create. Signed-off-by: Deepak Rawat Reviewed-by: Sinclair Yeh Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 12a41b039167..6a712a8d59e9 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -2214,12 +2214,16 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector, if (dev_priv->assume_16bpp) assumed_bpp = 2; + max_width = min(max_width, dev_priv->texture_max_width); + max_height = min(max_height, dev_priv->texture_max_height); + + /* + * For STDU extra limit for a mode on SVGA_REG_SCREENTARGET_MAX_WIDTH/ + * HEIGHT registers. + */ if (dev_priv->active_display_unit == vmw_du_screen_target) { max_width = min(max_width, dev_priv->stdu_max_width); - max_width = min(max_width, dev_priv->texture_max_width); - max_height = min(max_height, dev_priv->stdu_max_height); - max_height = min(max_height, dev_priv->texture_max_height); } /* Add preferred mode */ -- cgit v1.2.3-59-g8ed1b From a4bd815a94b7aae27e2413f2ce7b458f9843b8ae Mon Sep 17 00:00:00 2001 From: Deepak Rawat Date: Thu, 13 Sep 2018 12:46:10 +0200 Subject: drm/vmwgfx: Don't impose STDU limits on framebuffer size If framebuffers are larger, we create bounce surfaces that are within STDU limits. Signed-off-by: Deepak Rawat Reviewed-by: Thomas Hellstrom Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 25 ------------------------- drivers/gpu/drm/vmwgfx/vmwgfx_surface.c | 24 ++++++++++++++---------- 2 files changed, 14 insertions(+), 35 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c index 93f6b96ca7bb..f30e839f7bfd 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c @@ -1600,31 +1600,6 @@ int vmw_kms_stdu_init_display(struct vmw_private *dev_priv) dev_priv->active_display_unit = vmw_du_screen_target; - if (dev_priv->capabilities & SVGA_CAP_3D) { - /* - * For 3D VMs, display (scanout) buffer size is the smaller of - * max texture and max STDU - */ - uint32_t max_width, max_height; - - max_width = min(dev_priv->texture_max_width, - dev_priv->stdu_max_width); - max_height = min(dev_priv->texture_max_height, - dev_priv->stdu_max_height); - - dev->mode_config.max_width = max_width; - dev->mode_config.max_height = max_height; - } else { - /* - * Given various display aspect ratios, there's no way to - * estimate these using prim_bb_mem. So just set these to - * something arbitrarily large and we will reject any layout - * that doesn't fit prim_bb_mem later - */ - dev->mode_config.max_width = 8192; - dev->mode_config.max_height = 8192; - } - vmw_kms_create_implicit_placement_property(dev_priv, false); for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) { diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c index e125233e074b..80a01cd4c051 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c @@ -1404,22 +1404,17 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, *srf_out = NULL; if (for_scanout) { - uint32_t max_width, max_height; - if (!svga3dsurface_is_screen_target_format(format)) { DRM_ERROR("Invalid Screen Target surface format."); return -EINVAL; } - max_width = min(dev_priv->texture_max_width, - dev_priv->stdu_max_width); - max_height = min(dev_priv->texture_max_height, - dev_priv->stdu_max_height); - - if (size.width > max_width || size.height > max_height) { + if (size.width > dev_priv->texture_max_width || + size.height > dev_priv->texture_max_height) { DRM_ERROR("%ux%u\n, exceeds max surface size %ux%u", size.width, size.height, - max_width, max_height); + dev_priv->texture_max_width, + dev_priv->texture_max_height); return -EINVAL; } } else { @@ -1495,8 +1490,17 @@ int vmw_surface_gb_priv_define(struct drm_device *dev, if (srf->flags & SVGA3D_SURFACE_BIND_STREAM_OUTPUT) srf->res.backup_size += sizeof(SVGA3dDXSOState); + /* + * Don't set SVGA3D_SURFACE_SCREENTARGET flag for a scanout surface with + * size greater than STDU max width/height. This is really a workaround + * to support creation of big framebuffer requested by some user-space + * for whole topology. That big framebuffer won't really be used for + * binding with screen target as during prepare_fb a separate surface is + * created so it's safe to ignore SVGA3D_SURFACE_SCREENTARGET flag. + */ if (dev_priv->active_display_unit == vmw_du_screen_target && - for_scanout) + for_scanout && size.width <= dev_priv->stdu_max_width && + size.height <= dev_priv->stdu_max_height) srf->flags |= SVGA3D_SURFACE_SCREENTARGET; /* -- cgit v1.2.3-59-g8ed1b From e71cf591876536f7dd5a54ef68d631278ca6faa1 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Fri, 14 Sep 2018 09:24:19 +0200 Subject: drm/vmwgfx: Fix buffer object eviction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 19be55701071 ("drm/ttm: add operation ctx to ttm_bo_validate v2") introduced a regression where the vmwgfx driver refused to evict a buffer that was still busy instead of waiting for it to become idle. Fix this. Cc: Signed-off-by: Thomas Hellstrom Reviewed-by: Christian König --- drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c index 1f134570b759..f0ab6b2313bb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c @@ -3729,7 +3729,7 @@ int vmw_validate_single_buffer(struct vmw_private *dev_priv, { struct vmw_buffer_object *vbo = container_of(bo, struct vmw_buffer_object, base); - struct ttm_operation_ctx ctx = { interruptible, true }; + struct ttm_operation_ctx ctx = { interruptible, false }; int ret; if (vbo->pin_count > 0) -- cgit v1.2.3-59-g8ed1b From 50fdf60181b01b7383b85d4b9acbb842263d96a2 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 19 Sep 2018 21:59:10 -0700 Subject: qed: Fix populating the invalid stag value in multi function mode. In multi-function mode, driver receives the stag value (outer vlan) for a PF from management FW (MFW). If the stag value is negotiated prior to the driver load, then the stag is not notified to the driver and hence driver will have the invalid stag value. The fix is to request the MFW for STAG value during the driver load time. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dev.c | 15 ++++++++++++++- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 4 ++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 016ca8a7ec8a..97f073fd3725 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -1706,7 +1706,7 @@ static int qed_vf_start(struct qed_hwfn *p_hwfn, int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) { struct qed_load_req_params load_req_params; - u32 load_code, param, drv_mb_param; + u32 load_code, resp, param, drv_mb_param; bool b_default_mtu = true; struct qed_hwfn *p_hwfn; int rc = 0, mfw_rc, i; @@ -1852,6 +1852,19 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params) if (IS_PF(cdev)) { p_hwfn = QED_LEADING_HWFN(cdev); + + /* Get pre-negotiated values for stag, bandwidth etc. */ + DP_VERBOSE(p_hwfn, + QED_MSG_SPQ, + "Sending GET_OEM_UPDATES command to trigger stag/bandwidth attention handling\n"); + drv_mb_param = 1 << DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET; + rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt, + DRV_MSG_CODE_GET_OEM_UPDATES, + drv_mb_param, &resp, ¶m); + if (rc) + DP_NOTICE(p_hwfn, + "Failed to send GET_OEM_UPDATES attention request\n"); + drv_mb_param = STORM_FW_VERSION; rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt, DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER, diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 8faceb691657..9b3ef00e5782 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -12414,6 +12414,7 @@ struct public_drv_mb { #define DRV_MSG_SET_RESOURCE_VALUE_MSG 0x35000000 #define DRV_MSG_CODE_OV_UPDATE_WOL 0x38000000 #define DRV_MSG_CODE_OV_UPDATE_ESWITCH_MODE 0x39000000 +#define DRV_MSG_CODE_GET_OEM_UPDATES 0x41000000 #define DRV_MSG_CODE_BW_UPDATE_ACK 0x32000000 #define DRV_MSG_CODE_NIG_DRAIN 0x30000000 @@ -12541,6 +12542,9 @@ struct public_drv_mb { #define DRV_MB_PARAM_ESWITCH_MODE_VEB 0x1 #define DRV_MB_PARAM_ESWITCH_MODE_VEPA 0x2 +#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_MASK 0x1 +#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET 0 + #define DRV_MB_PARAM_SET_LED_MODE_OPER 0x0 #define DRV_MB_PARAM_SET_LED_MODE_ON 0x1 #define DRV_MB_PARAM_SET_LED_MODE_OFF 0x2 -- cgit v1.2.3-59-g8ed1b From 0216da9413afa546627a1b0d319dfd17fef34050 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 19 Sep 2018 21:59:11 -0700 Subject: qed: Do not add VLAN 0 tag to untagged frames in multi-function mode. In certain multi-function switch dependent modes, firmware adds vlan tag 0 to the untagged frames. This leads to double tagging for the traffic if the dcbx is enabled, which is not the desired behavior. To avoid this, driver needs to set "dcb_dont_add_vlan0" flag. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 9 ++++++++- drivers/net/ethernet/qlogic/qed/qed_dcbx.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 6bb76e6d3c14..d53f33c6b1fc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -190,6 +190,7 @@ qed_dcbx_dp_protocol(struct qed_hwfn *p_hwfn, struct qed_dcbx_results *p_data) static void qed_dcbx_set_params(struct qed_dcbx_results *p_data, + struct qed_hwfn *p_hwfn, struct qed_hw_info *p_info, bool enable, u8 prio, @@ -206,6 +207,11 @@ qed_dcbx_set_params(struct qed_dcbx_results *p_data, else p_data->arr[type].update = DONT_UPDATE_DCB_DSCP; + /* Do not add vlan tag 0 when DCB is enabled and port in UFP/OV mode */ + if ((test_bit(QED_MF_8021Q_TAGGING, &p_hwfn->cdev->mf_bits) || + test_bit(QED_MF_8021AD_TAGGING, &p_hwfn->cdev->mf_bits))) + p_data->arr[type].dont_add_vlan0 = true; + /* QM reconf data */ if (p_info->personality == personality) qed_hw_info_set_offload_tc(p_info, tc); @@ -231,7 +237,7 @@ qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, personality = qed_dcbx_app_update[i].personality; - qed_dcbx_set_params(p_data, p_info, enable, + qed_dcbx_set_params(p_data, p_hwfn, p_info, enable, prio, tc, type, personality); } } @@ -954,6 +960,7 @@ static void qed_dcbx_update_protocol_data(struct protocol_dcb_data *p_data, p_data->dcb_enable_flag = p_src->arr[type].enable; p_data->dcb_priority = p_src->arr[type].priority; p_data->dcb_tc = p_src->arr[type].tc; + p_data->dcb_dont_add_vlan0 = p_src->arr[type].dont_add_vlan0; } /* Set pf update ramrod command params */ diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.h b/drivers/net/ethernet/qlogic/qed/qed_dcbx.h index a4d688c04e18..01f253ea4b22 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.h +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.h @@ -55,6 +55,7 @@ struct qed_dcbx_app_data { u8 update; /* Update indication */ u8 priority; /* Priority */ u8 tc; /* Traffic Class */ + bool dont_add_vlan0; /* Do not insert a vlan tag with id 0 */ }; #define QED_DCBX_VERSION_DISABLED 0 -- cgit v1.2.3-59-g8ed1b From 7e3e375ceede8fba5218362d14db7de25fa83f12 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 19 Sep 2018 21:59:12 -0700 Subject: qed: Add missing device config for RoCE EDPM in UFP mode. This patch adds support to configure the DORQ to use vlan-id/priority for roce EDPM. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 40 ++++++++++++++------------ drivers/net/ethernet/qlogic/qed/qed_mcp.c | 24 +++++++++++++--- drivers/net/ethernet/qlogic/qed/qed_reg_addr.h | 6 ++++ 3 files changed, 48 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index d53f33c6b1fc..f5459de6d60a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -190,11 +190,8 @@ qed_dcbx_dp_protocol(struct qed_hwfn *p_hwfn, struct qed_dcbx_results *p_data) static void qed_dcbx_set_params(struct qed_dcbx_results *p_data, - struct qed_hwfn *p_hwfn, - struct qed_hw_info *p_info, - bool enable, - u8 prio, - u8 tc, + struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool enable, u8 prio, u8 tc, enum dcbx_protocol_type type, enum qed_pci_personality personality) { @@ -213,18 +210,24 @@ qed_dcbx_set_params(struct qed_dcbx_results *p_data, p_data->arr[type].dont_add_vlan0 = true; /* QM reconf data */ - if (p_info->personality == personality) - qed_hw_info_set_offload_tc(p_info, tc); + if (p_hwfn->hw_info.personality == personality) + qed_hw_info_set_offload_tc(&p_hwfn->hw_info, tc); + + /* Configure dcbx vlan priority in doorbell block for roce EDPM */ + if (test_bit(QED_MF_UFP_SPECIFIC, &p_hwfn->cdev->mf_bits) && + type == DCBX_PROTOCOL_ROCE) { + qed_wr(p_hwfn, p_ptt, DORQ_REG_TAG1_OVRD_MODE, 1); + qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_PCP_BB_K2, prio << 1); + } } /* Update app protocol data and hw_info fields with the TLV info */ static void qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, - struct qed_hwfn *p_hwfn, - bool enable, - u8 prio, u8 tc, enum dcbx_protocol_type type) + struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, + bool enable, u8 prio, u8 tc, + enum dcbx_protocol_type type) { - struct qed_hw_info *p_info = &p_hwfn->hw_info; enum qed_pci_personality personality; enum dcbx_protocol_type id; int i; @@ -237,7 +240,7 @@ qed_dcbx_update_app_info(struct qed_dcbx_results *p_data, personality = qed_dcbx_app_update[i].personality; - qed_dcbx_set_params(p_data, p_hwfn, p_info, enable, + qed_dcbx_set_params(p_data, p_hwfn, p_ptt, enable, prio, tc, type, personality); } } @@ -271,7 +274,7 @@ qed_dcbx_get_app_protocol_type(struct qed_hwfn *p_hwfn, * reconfiguring QM. Get protocol specific data for PF update ramrod command. */ static int -qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, +qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, struct qed_dcbx_results *p_data, struct dcbx_app_priority_entry *p_tbl, u32 pri_tc_tbl, int count, u8 dcbx_version) @@ -315,7 +318,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, enable = true; } - qed_dcbx_update_app_info(p_data, p_hwfn, enable, + qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, enable, priority, tc, type); } } @@ -337,7 +340,7 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, continue; enable = (type == DCBX_PROTOCOL_ETH) ? false : !!dcbx_version; - qed_dcbx_update_app_info(p_data, p_hwfn, enable, + qed_dcbx_update_app_info(p_data, p_hwfn, p_ptt, enable, priority, tc, type); } @@ -347,7 +350,8 @@ qed_dcbx_process_tlv(struct qed_hwfn *p_hwfn, /* Parse app TLV's to update TC information in hw_info structure for * reconfiguring QM. Get protocol specific data for PF update ramrod command. */ -static int qed_dcbx_process_mib_info(struct qed_hwfn *p_hwfn) +static int +qed_dcbx_process_mib_info(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { struct dcbx_app_priority_feature *p_app; struct dcbx_app_priority_entry *p_tbl; @@ -371,7 +375,7 @@ static int qed_dcbx_process_mib_info(struct qed_hwfn *p_hwfn) p_info = &p_hwfn->hw_info; num_entries = QED_MFW_GET_FIELD(p_app->flags, DCBX_APP_NUM_ENTRIES); - rc = qed_dcbx_process_tlv(p_hwfn, &data, p_tbl, pri_tc_tbl, + rc = qed_dcbx_process_tlv(p_hwfn, p_ptt, &data, p_tbl, pri_tc_tbl, num_entries, dcbx_version); if (rc) return rc; @@ -897,7 +901,7 @@ qed_dcbx_mib_update_event(struct qed_hwfn *p_hwfn, return rc; if (type == QED_DCBX_OPERATIONAL_MIB) { - rc = qed_dcbx_process_mib_info(p_hwfn); + rc = qed_dcbx_process_mib_info(p_hwfn, p_ptt); if (!rc) { /* reconfigure tcs of QM queues according * to negotiation results diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 5d37ec7e9b0b..58c7eb9d8e1b 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1581,13 +1581,29 @@ static void qed_mcp_update_stag(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) p_hwfn->mcp_info->func_info.ovlan = (u16)shmem_info.ovlan_stag & FUNC_MF_CFG_OV_STAG_MASK; p_hwfn->hw_info.ovlan = p_hwfn->mcp_info->func_info.ovlan; - if ((p_hwfn->hw_info.hw_mode & BIT(MODE_MF_SD)) && - (p_hwfn->hw_info.ovlan != QED_MCP_VLAN_UNSET)) { - qed_wr(p_hwfn, p_ptt, - NIG_REG_LLH_FUNC_TAG_VALUE, p_hwfn->hw_info.ovlan); + if (test_bit(QED_MF_OVLAN_CLSS, &p_hwfn->cdev->mf_bits)) { + if (p_hwfn->hw_info.ovlan != QED_MCP_VLAN_UNSET) { + qed_wr(p_hwfn, p_ptt, NIG_REG_LLH_FUNC_TAG_VALUE, + p_hwfn->hw_info.ovlan); + qed_wr(p_hwfn, p_ptt, NIG_REG_LLH_FUNC_TAG_EN, 1); + + /* Configure DB to add external vlan to EDPM packets */ + qed_wr(p_hwfn, p_ptt, DORQ_REG_TAG1_OVRD_MODE, 1); + qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_EXT_VID_BB_K2, + p_hwfn->hw_info.ovlan); + } else { + qed_wr(p_hwfn, p_ptt, NIG_REG_LLH_FUNC_TAG_EN, 0); + qed_wr(p_hwfn, p_ptt, NIG_REG_LLH_FUNC_TAG_VALUE, 0); + qed_wr(p_hwfn, p_ptt, DORQ_REG_TAG1_OVRD_MODE, 0); + qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_EXT_VID_BB_K2, 0); + } + qed_sp_pf_update_stag(p_hwfn); } + DP_VERBOSE(p_hwfn, QED_MSG_SP, "ovlan = %d hw_mode = 0x%x\n", + p_hwfn->mcp_info->func_info.ovlan, p_hwfn->hw_info.hw_mode); + /* Acknowledge the MFW */ qed_mcp_cmd(p_hwfn, p_ptt, DRV_MSG_CODE_S_TAG_UPDATE_ACK, 0, &resp, ¶m); diff --git a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h index f736f70956fd..2440970882c4 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h +++ b/drivers/net/ethernet/qlogic/qed/qed_reg_addr.h @@ -216,6 +216,12 @@ 0x00c000UL #define DORQ_REG_IFEN \ 0x100040UL +#define DORQ_REG_TAG1_OVRD_MODE \ + 0x1008b4UL +#define DORQ_REG_PF_PCP_BB_K2 \ + 0x1008c4UL +#define DORQ_REG_PF_EXT_VID_BB_K2 \ + 0x1008c8UL #define DORQ_REG_DB_DROP_REASON \ 0x100a2cUL #define DORQ_REG_DB_DROP_DETAILS \ -- cgit v1.2.3-59-g8ed1b From 783f3b4e9ec50491c21746e7e05ec6c39c21f563 Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Mon, 17 Sep 2018 11:40:22 -0500 Subject: usb: musb: dsps: do not disable CPPI41 irq in driver teardown TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts in both musb controllers. So disabling the CPPI irq in one musb driver breaks the other musb module. Since musb is already disabled before tearing down dma controller in musb_remove(), it is safe to not disable CPPI irq in musb_dma_controller_destroy(). Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_dsps.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index df827ff57b0d..23a0df79ef21 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -658,16 +658,6 @@ dsps_dma_controller_create(struct musb *musb, void __iomem *base) return controller; } -static void dsps_dma_controller_destroy(struct dma_controller *c) -{ - struct musb *musb = c->musb; - struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); - void __iomem *usbss_base = glue->usbss_base; - - musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP); - cppi41_dma_controller_destroy(c); -} - #ifdef CONFIG_PM_SLEEP static void dsps_dma_controller_suspend(struct dsps_glue *glue) { @@ -697,7 +687,7 @@ static struct musb_platform_ops dsps_ops = { #ifdef CONFIG_USB_TI_CPPI41_DMA .dma_init = dsps_dma_controller_create, - .dma_exit = dsps_dma_controller_destroy, + .dma_exit = cppi41_dma_controller_destroy, #endif .enable = dsps_musb_enable, .disable = dsps_musb_disable, -- cgit v1.2.3-59-g8ed1b From e871db8d78df1c411032cbb3acfdf8930509360e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 11 Sep 2018 10:00:44 +0200 Subject: Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 656d247819c9..bec581fb7c63 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -460,7 +460,7 @@ static int service_outstanding_interrupt(struct wdm_device *desc) set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); - rv = usb_submit_urb(desc->response, GFP_ATOMIC); + rv = usb_submit_urb(desc->response, GFP_KERNEL); spin_lock_irq(&desc->iuspin); if (rv) { dev_err(&desc->intf->dev, -- cgit v1.2.3-59-g8ed1b From 7a68d9fb851012829c29e770621905529bd9490b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 5 Sep 2018 12:07:02 +0200 Subject: USB: usbdevfs: sanitize flags more Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6ce77b33da61..263dd2f309fb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1434,10 +1434,13 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb struct async *as = NULL; struct usb_ctrlrequest *dr = NULL; unsigned int u, totlen, isofrmlen; - int i, ret, is_in, num_sgs = 0, ifnum = -1; + int i, ret, num_sgs = 0, ifnum = -1; int number_of_packets = 0; unsigned int stream_id = 0; void *buf; + bool is_in; + bool allow_short = false; + bool allow_zero = false; unsigned long mask = USBDEVFS_URB_SHORT_NOT_OK | USBDEVFS_URB_BULK_CONTINUATION | USBDEVFS_URB_NO_FSBR | @@ -1471,6 +1474,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb u = 0; switch (uurb->type) { case USBDEVFS_URB_TYPE_CONTROL: + if (is_in) + allow_short = true; if (!usb_endpoint_xfer_control(&ep->desc)) return -EINVAL; /* min 8 byte setup packet */ @@ -1511,6 +1516,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb break; case USBDEVFS_URB_TYPE_BULK: + if (!is_in) + allow_zero = true; + else + allow_short = true; switch (usb_endpoint_type(&ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: case USB_ENDPOINT_XFER_ISOC: @@ -1531,6 +1540,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb if (!usb_endpoint_xfer_int(&ep->desc)) return -EINVAL; interrupt_urb: + if (!is_in) + allow_zero = true; + else + allow_short = true; break; case USBDEVFS_URB_TYPE_ISO: @@ -1676,9 +1689,9 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb u = (is_in ? URB_DIR_IN : URB_DIR_OUT); if (uurb->flags & USBDEVFS_URB_ISO_ASAP) u |= URB_ISO_ASAP; - if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK && is_in) + if (allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK) u |= URB_SHORT_NOT_OK; - if (uurb->flags & USBDEVFS_URB_ZERO_PACKET) + if (allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET) u |= URB_ZERO_PACKET; if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT) u |= URB_NO_INTERRUPT; -- cgit v1.2.3-59-g8ed1b From 81e0403b26d94360abd1f6a57311337973bc82cd Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 5 Sep 2018 12:07:03 +0200 Subject: USB: usbdevfs: restore warning for nonsensical flags If we filter flags before they reach the core we need to generate our own warnings. Signed-off-by: Oliver Neukum Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 263dd2f309fb..244417d0dfd1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1697,6 +1697,11 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb u |= URB_NO_INTERRUPT; as->urb->transfer_flags = u; + if (!allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK) + dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_SHORT_NOT_OK.\n"); + if (!allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET) + dev_warn(&ps->dev->dev, "Requested nonsensical USBDEVFS_URB_ZERO_PACKET.\n"); + as->urb->transfer_buffer_length = uurb->buffer_length; as->urb->setup_packet = (unsigned char *)dr; dr = NULL; -- cgit v1.2.3-59-g8ed1b From c183813fcee44a249339b7c46e1ad271ca1870aa Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Sep 2018 13:58:51 -0400 Subject: USB: remove LPM management from usb_driver_claim_interface() usb_driver_claim_interface() disables and re-enables Link Power Management, but it shouldn't do either one, for the reasons listed below. This patch removes the two LPM-related function calls from the routine. The reason for disabling LPM in the analogous function usb_probe_interface() is so that drivers won't have to deal with unwanted LPM transitions in their probe routine. But usb_driver_claim_interface() doesn't call the driver's probe routine (or any other callbacks), so that reason doesn't apply here. Furthermore, no driver other than usbfs will ever call usb_driver_claim_interface() unless it is already bound to another interface in the same device, which means disabling LPM here would be redundant. usbfs doesn't interact with LPM at all. Lastly, the error return from usb_unlocked_disable_lpm() isn't handled properly; the code doesn't clean up its earlier actions before returning. Signed-off-by: Alan Stern Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e76e95f62f76..7652dcb57998 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -512,7 +512,6 @@ int usb_driver_claim_interface(struct usb_driver *driver, struct device *dev; struct usb_device *udev; int retval = 0; - int lpm_disable_error = -ENODEV; if (!iface) return -ENODEV; @@ -533,16 +532,6 @@ int usb_driver_claim_interface(struct usb_driver *driver, iface->condition = USB_INTERFACE_BOUND; - /* See the comment about disabling LPM in usb_probe_interface(). */ - if (driver->disable_hub_initiated_lpm) { - lpm_disable_error = usb_unlocked_disable_lpm(udev); - if (lpm_disable_error) { - dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n", - __func__, driver->name); - return -ENOMEM; - } - } - /* Claimed interfaces are initially inactive (suspended) and * runtime-PM-enabled, but only if the driver has autosuspend * support. Otherwise they are marked active, to prevent the @@ -561,10 +550,6 @@ int usb_driver_claim_interface(struct usb_driver *driver, if (device_is_registered(dev)) retval = device_bind_driver(dev); - /* Attempt to re-enable USB3 LPM, if the disable was successful. */ - if (!lpm_disable_error) - usb_unlocked_enable_lpm(udev); - return retval; } EXPORT_SYMBOL_GPL(usb_driver_claim_interface); -- cgit v1.2.3-59-g8ed1b From bd729f9d67aa9a303d8925bb8c4f06af25f407d1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Sep 2018 13:59:59 -0400 Subject: USB: fix error handling in usb_driver_claim_interface() The syzbot fuzzing project found a use-after-free bug in the USB core. The bug was caused by usbfs not unbinding from an interface when the USB device file was closed, which led another process to attempt the unbind later on, after the private data structure had been deallocated. The reason usbfs did not unbind the interface at the appropriate time was because it thought the interface had never been claimed in the first place. This was caused by the fact that usb_driver_claim_interface() does not clean up properly when device_bind_driver() returns an error. Although the error code gets passed back to the caller, the iface->dev.driver pointer remains set and iface->condition remains equal to USB_INTERFACE_BOUND. This patch adds proper error handling to usb_driver_claim_interface(). Signed-off-by: Alan Stern Reported-by: syzbot+f84aa7209ccec829536f@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 7652dcb57998..a1f225f077cd 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -550,6 +550,21 @@ int usb_driver_claim_interface(struct usb_driver *driver, if (device_is_registered(dev)) retval = device_bind_driver(dev); + if (retval) { + dev->driver = NULL; + usb_set_intfdata(iface, NULL); + iface->needs_remote_wakeup = 0; + iface->condition = USB_INTERFACE_UNBOUND; + + /* + * Unbound interfaces are always runtime-PM-disabled + * and runtime-PM-suspended + */ + if (driver->supports_autosuspend) + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + } + return retval; } EXPORT_SYMBOL_GPL(usb_driver_claim_interface); -- cgit v1.2.3-59-g8ed1b From c9a4cb204e9eb7fa7dfbe3f7d3a674fa530aa193 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Sep 2018 14:00:53 -0400 Subject: USB: handle NULL config in usb_find_alt_setting() usb_find_alt_setting() takes a pointer to a struct usb_host_config as an argument; it searches for an interface with specified interface and alternate setting numbers in that config. However, it crashes if the usb_host_config pointer argument is NULL. Since this is a general-purpose routine, available for use in many places, we want to to be more robust. This patch makes it return NULL whenever the config argument is NULL. Signed-off-by: Alan Stern Reported-by: syzbot+19c3aaef85a89d451eac@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 623be3174fb3..79d8bd7a612e 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -228,6 +228,8 @@ struct usb_host_interface *usb_find_alt_setting( struct usb_interface_cache *intf_cache = NULL; int i; + if (!config) + return NULL; for (i = 0; i < config->desc.bNumInterfaces; i++) { if (config->intf_cache[i]->altsetting[0].desc.bInterfaceNumber == iface_num) { -- cgit v1.2.3-59-g8ed1b From 85682a7e3b9c664995ad477520f917039afdc330 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 10 Sep 2018 06:09:04 +0000 Subject: powerpc: fix csum_ipv6_magic() on little endian platforms On little endian platforms, csum_ipv6_magic() keeps len and proto in CPU byte order. This generates a bad results leading to ICMPv6 packets from other hosts being dropped by powerpc64le platforms. In order to fix this, len and proto should be converted to network byte order ie bigendian byte order. However checksumming 0x12345678 and 0x56341278 provide the exact same result so it is enough to rotate the sum of len and proto by 1 byte. PPC32 only support bigendian so the fix is needed for PPC64 only Fixes: e9c4943a107b ("powerpc: Implement csum_ipv6_magic in assembly") Reported-by: Jianlin Shi Reported-by: Xin Long Cc: # 4.18+ Signed-off-by: Christophe Leroy Tested-by: Xin Long Signed-off-by: Michael Ellerman --- arch/powerpc/lib/checksum_64.S | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S index 886ed94b9c13..d05c8af4ac51 100644 --- a/arch/powerpc/lib/checksum_64.S +++ b/arch/powerpc/lib/checksum_64.S @@ -443,6 +443,9 @@ _GLOBAL(csum_ipv6_magic) addc r0, r8, r9 ld r10, 0(r4) ld r11, 8(r4) +#ifdef CONFIG_CPU_LITTLE_ENDIAN + rotldi r5, r5, 8 +#endif adde r0, r0, r10 add r5, r5, r7 adde r0, r0, r11 -- cgit v1.2.3-59-g8ed1b From 5c54fcac9a9de559b444ac63ec3cd82f1d157a0b Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 19 Sep 2018 10:58:05 +0300 Subject: usb: roles: Take care of driver module reference counting This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: Acked-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/common/roles.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/usb/common/roles.c b/drivers/usb/common/roles.c index 15cc76e22123..99116af07f1d 100644 --- a/drivers/usb/common/roles.c +++ b/drivers/usb/common/roles.c @@ -109,8 +109,15 @@ static void *usb_role_switch_match(struct device_connection *con, int ep, */ struct usb_role_switch *usb_role_switch_get(struct device *dev) { - return device_connection_find_match(dev, "usb-role-switch", NULL, - usb_role_switch_match); + struct usb_role_switch *sw; + + sw = device_connection_find_match(dev, "usb-role-switch", NULL, + usb_role_switch_match); + + if (!IS_ERR_OR_NULL(sw)) + WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); + + return sw; } EXPORT_SYMBOL_GPL(usb_role_switch_get); @@ -122,8 +129,10 @@ EXPORT_SYMBOL_GPL(usb_role_switch_get); */ void usb_role_switch_put(struct usb_role_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { put_device(&sw->dev); + module_put(sw->dev.parent->driver->owner); + } } EXPORT_SYMBOL_GPL(usb_role_switch_put); -- cgit v1.2.3-59-g8ed1b From 16c4cb19fa85c648a803752eb63cac0ef69231c2 Mon Sep 17 00:00:00 2001 From: Harry Pan Date: Fri, 14 Sep 2018 16:58:16 +0800 Subject: usb: core: safely deal with the dynamic quirk lists Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[] [] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan Acked-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index e77dfe5ed5ec..178d6c6063c0 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -58,6 +58,7 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) quirk_list = kcalloc(quirk_count, sizeof(struct quirk_entry), GFP_KERNEL); if (!quirk_list) { + quirk_count = 0; mutex_unlock(&quirk_mutex); return -ENOMEM; } @@ -154,7 +155,7 @@ static struct kparam_string quirks_param_string = { .string = quirks_param, }; -module_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644); +device_param_cb(quirks, &quirks_param_ops, &quirks_param_string, 0644); MODULE_PARM_DESC(quirks, "Add/modify USB quirks by specifying quirks=vendorID:productID:quirks"); /* Lists of quirky USB devices, split in device quirks and interface quirks. -- cgit v1.2.3-59-g8ed1b From 3e3b81965cbfa01fda6d77750feedc3c46fc28d0 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 19 Sep 2018 10:58:04 +0300 Subject: usb: typec: mux: Take care of driver module reference counting Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Acked-by: Hans de Goede Tested-by: Hans de Goede Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/mux.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index ddaac63ecf12..d990aa510fab 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -9,6 +9,7 @@ #include #include +#include #include #include @@ -49,8 +50,10 @@ struct typec_switch *typec_switch_get(struct device *dev) mutex_lock(&switch_lock); sw = device_connection_find_match(dev, "typec-switch", NULL, typec_switch_match); - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { + WARN_ON(!try_module_get(sw->dev->driver->owner)); get_device(sw->dev); + } mutex_unlock(&switch_lock); return sw; @@ -65,8 +68,10 @@ EXPORT_SYMBOL_GPL(typec_switch_get); */ void typec_switch_put(struct typec_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { + module_put(sw->dev->driver->owner); put_device(sw->dev); + } } EXPORT_SYMBOL_GPL(typec_switch_put); @@ -136,8 +141,10 @@ struct typec_mux *typec_mux_get(struct device *dev, const char *name) mutex_lock(&mux_lock); mux = device_connection_find_match(dev, name, NULL, typec_mux_match); - if (!IS_ERR_OR_NULL(mux)) + if (!IS_ERR_OR_NULL(mux)) { + WARN_ON(!try_module_get(mux->dev->driver->owner)); get_device(mux->dev); + } mutex_unlock(&mux_lock); return mux; @@ -152,8 +159,10 @@ EXPORT_SYMBOL_GPL(typec_mux_get); */ void typec_mux_put(struct typec_mux *mux) { - if (!IS_ERR_OR_NULL(mux)) + if (!IS_ERR_OR_NULL(mux)) { + module_put(mux->dev->driver->owner); put_device(mux->dev); + } } EXPORT_SYMBOL_GPL(typec_mux_put); -- cgit v1.2.3-59-g8ed1b From c716a25b9b70084e1144f77423f5aedd772ea478 Mon Sep 17 00:00:00 2001 From: Thiago Jung Bauermann Date: Thu, 20 Sep 2018 01:38:58 -0300 Subject: powerpc/pkeys: Fix reading of ibm, processor-storage-keys property scan_pkey_feature() uses of_property_read_u32_array() to read the ibm,processor-storage-keys property and calls be32_to_cpu() on the value it gets. The problem is that of_property_read_u32_array() already returns the value converted to the CPU byte order. The value of pkeys_total ends up more or less sane because there's a min() call in pkey_initialize() which reduces pkeys_total to 32. So in practice the kernel ignores the fact that the hypervisor reserved one key for itself (the device tree advertises 31 keys in my test VM). This is wrong, but the effect in practice is that when a process tries to allocate the 32nd key, it gets an -EINVAL error instead of -ENOSPC which would indicate that there aren't any keys available Fixes: cf43d3b26452 ("powerpc: Enable pkey subsystem") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Thiago Jung Bauermann Signed-off-by: Michael Ellerman --- arch/powerpc/mm/pkeys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/pkeys.c b/arch/powerpc/mm/pkeys.c index 333b1f80c435..b271b283c785 100644 --- a/arch/powerpc/mm/pkeys.c +++ b/arch/powerpc/mm/pkeys.c @@ -45,7 +45,7 @@ static void scan_pkey_feature(void) * Since any pkey can be used for data or execute, we will just treat * all keys as equal and track them as one entity. */ - pkeys_total = be32_to_cpu(vals[0]); + pkeys_total = vals[0]; pkeys_devtree_defined = true; } -- cgit v1.2.3-59-g8ed1b From 7e620984b62532783912312e334f3c48cdacbd5d Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 20 Sep 2018 14:11:17 +0200 Subject: serial: imx: restore handshaking irq for imx1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable Signed-off-by: Uwe Kleine-König Reviewed-by: Leonard Crestez Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 239c0fa2e981..0f67197a3783 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2351,6 +2351,14 @@ static int imx_uart_probe(struct platform_device *pdev) ret); return ret; } + + ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0, + dev_name(&pdev->dev), sport); + if (ret) { + dev_err(&pdev->dev, "failed to request rts irq: %d\n", + ret); + return ret; + } } else { ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0, dev_name(&pdev->dev), sport); -- cgit v1.2.3-59-g8ed1b From d124b44f09cab67fc6da4a4513417e3e54b01efc Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Tue, 18 Sep 2018 18:55:41 +0200 Subject: Compiler Attributes: naked was fixed in gcc 4.6 Commit 9c695203a7dd ("compiler-gcc.h: gcc-4.5 needs noclone and noinline on __naked functions") added noinline and noclone as a workaround for a gcc 4.5 bug, which was resolved in 4.6.0. Since now the minimum gcc supported version is 4.6, we can clean it up. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=44290 and https://godbolt.org/z/h6NMIL Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Rasmus Villemoes Cc: Eli Friedman Cc: Christopher Li Cc: Kees Cook Cc: Ingo Molnar Cc: Geert Uytterhoeven Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Masahiro Yamada Cc: Joe Perches Cc: Dominique Martinet Cc: Linus Torvalds Cc: linux-sparse@vger.kernel.org Tested-by: Stefan Agner Reviewed-by: Stefan Agner Reviewed-by: Luc Van Oostenryck Reviewed-by: Nick Desaulniers Signed-off-by: Miguel Ojeda Signed-off-by: Greg Kroah-Hartman --- include/linux/compiler-gcc.h | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 763bbad1e258..25d3dd6b2702 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -84,14 +84,8 @@ * to trace naked functions because then mcount is called without * stack and frame pointer being set up and there is no chance to * restore the lr register to the value before mcount was called. - * - * The asm() bodies of naked functions often depend on standard calling - * conventions, therefore they must be noinline and noclone. - * - * GCC 4.[56] currently fail to enforce this, so we must do so ourselves. - * See GCC PR44290. */ -#define __naked __attribute__((naked)) noinline __noclone notrace +#define __naked __attribute__((naked)) notrace #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -- cgit v1.2.3-59-g8ed1b From ae596de1a0c8c2c924dc99d23c026259372ab234 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Tue, 18 Sep 2018 18:55:42 +0200 Subject: Compiler Attributes: naked can be shared The naked attribute is supported by at least gcc >= 4.6 (for ARM, which is the only current user), gcc >= 8 (for x86), clang >= 3.1 and icc >= 13. See https://godbolt.org/z/350Dyc Therefore, move it out of compiler-gcc.h so that the definition is shared by all compilers. This also fixes Clang support for ARM32 --- 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive"). Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Cc: Rasmus Villemoes Cc: Eli Friedman Cc: Christopher Li Cc: Kees Cook Cc: Ingo Molnar Cc: Geert Uytterhoeven Cc: Greg Kroah-Hartman Cc: Masahiro Yamada Cc: Joe Perches Cc: Dominique Martinet Cc: Linus Torvalds Cc: linux-sparse@vger.kernel.org Suggested-by: Arnd Bergmann Tested-by: Stefan Agner Reviewed-by: Stefan Agner Reviewed-by: Luc Van Oostenryck Reviewed-by: Nick Desaulniers Signed-off-by: Miguel Ojeda Signed-off-by: Greg Kroah-Hartman --- include/linux/compiler-gcc.h | 8 -------- include/linux/compiler_types.h | 8 ++++++++ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 25d3dd6b2702..4d36b27214fd 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -79,14 +79,6 @@ #define __noretpoline __attribute__((indirect_branch("keep"))) #endif -/* - * it doesn't make sense on ARM (currently the only user of __naked) - * to trace naked functions because then mcount is called without - * stack and frame pointer being set up and there is no chance to - * restore the lr register to the value before mcount was called. - */ -#define __naked __attribute__((naked)) notrace - #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) #define __optimize(level) __attribute__((__optimize__(level))) diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 3525c179698c..db192becfec4 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -226,6 +226,14 @@ struct ftrace_likely_data { #define notrace __attribute__((no_instrument_function)) #endif +/* + * it doesn't make sense on ARM (currently the only user of __naked) + * to trace naked functions because then mcount is called without + * stack and frame pointer being set up and there is no chance to + * restore the lr register to the value before mcount was called. + */ +#define __naked __attribute__((naked)) notrace + #define __compiler_offsetof(a, b) __builtin_offsetof(a, b) /* -- cgit v1.2.3-59-g8ed1b From 7ce5c8cd753f9afa8e79e9ec40351998e354f239 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 20 Sep 2018 08:30:55 -0600 Subject: libata: mask swap internal and hardware tag hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra Tested-by: Paul Sbarra Signed-off-by: Jens Axboe --- drivers/ata/libata-core.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 172e32840256..3893f9bde1e6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5359,10 +5359,20 @@ void ata_qc_complete(struct ata_queued_cmd *qc) */ int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active) { + u64 done_mask, ap_qc_active = ap->qc_active; int nr_done = 0; - u64 done_mask; - done_mask = ap->qc_active ^ qc_active; + /* + * If the internal tag is set on ap->qc_active, then we care about + * bit0 on the passed in qc_active mask. Move that bit up to match + * the internal tag. + */ + if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) { + qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL; + qc_active ^= qc_active & 0x01; + } + + done_mask = ap_qc_active ^ qc_active; if (unlikely(done_mask & qc_active)) { ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n", -- cgit v1.2.3-59-g8ed1b From f9d5b1d50840320fb6c66fafd1a532a995fc3758 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Thu, 20 Sep 2018 09:31:45 +0300 Subject: mlxsw: spectrum: Bump required firmware version MC-aware mode was introduced to mlxsw in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd3632 ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 930700413b1d..b492152c8881 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -44,8 +44,8 @@ #define MLXSW_SP_FWREV_MINOR_TO_BRANCH(minor) ((minor) / 100) #define MLXSW_SP1_FWREV_MAJOR 13 -#define MLXSW_SP1_FWREV_MINOR 1702 -#define MLXSW_SP1_FWREV_SUBMINOR 6 +#define MLXSW_SP1_FWREV_MINOR 1703 +#define MLXSW_SP1_FWREV_SUBMINOR 4 #define MLXSW_SP1_FWREV_CAN_RESET_MINOR 1702 static const struct mlxsw_fw_rev mlxsw_sp1_fw_rev = { -- cgit v1.2.3-59-g8ed1b From 56ce3c5a50f4d8cc95361b1ec7f152006c6320d8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 20 Sep 2018 09:27:30 +0200 Subject: smc: generic netlink family should be __ro_after_init The generic netlink family is only initialized during module init, so it should be __ro_after_init like all other generic netlink families. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/smc/smc_pnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/smc/smc_pnet.c b/net/smc/smc_pnet.c index 01c6ce042a1c..7cb3e4f07c10 100644 --- a/net/smc/smc_pnet.c +++ b/net/smc/smc_pnet.c @@ -461,7 +461,7 @@ static const struct genl_ops smc_pnet_ops[] = { }; /* SMC_PNETID family definition */ -static struct genl_family smc_pnet_nl_family = { +static struct genl_family smc_pnet_nl_family __ro_after_init = { .hdrsize = 0, .name = SMCR_GENL_FAMILY_NAME, .version = SMCR_GENL_FAMILY_VERSION, -- cgit v1.2.3-59-g8ed1b From 65eea8edc315589d6c993cf12dbb5d0e9ef1fe4e Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 20 Sep 2018 09:09:48 -0600 Subject: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection. Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store. Based on an initial patch by Brian Belleville. CVE-2018-7755 Signed-off-by: Andy Whitcroft Broke up long line. Signed-off-by: Jens Axboe --- drivers/block/floppy.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 48f622728ce6..f2b6f4da1034 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3467,6 +3467,9 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int (struct floppy_struct **)&outparam); if (ret) return ret; + memcpy(&inparam.g, outparam, + offsetof(struct floppy_struct, name)); + outparam = &inparam.g; break; case FDMSGON: UDP->flags |= FTD_MSG; -- cgit v1.2.3-59-g8ed1b From 96147db1e1dff83679e71ac92193cbcab761a14c Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 18 Sep 2018 18:36:21 +0300 Subject: pinctrl: intel: Do pin translation in other GPIO operations as well For some reason I thought GPIOLIB handles translation from GPIO ranges to pinctrl pins but it turns out not to be the case. This means that when GPIOs operations are performed for a pin controller having a custom GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets used internally. Fix this in the same way we did for lock/unlock IRQ operations and translate the GPIO number to pin before using it. Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups") Reported-by: Rajat Jain Signed-off-by: Mika Westerberg Tested-by: Rajat Jain Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-intel.c | 111 +++++++++++++++++++--------------- 1 file changed, 63 insertions(+), 48 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 62b009b27eda..ec8dafc94694 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -747,13 +747,63 @@ static const struct pinctrl_desc intel_pinctrl_desc = { .owner = THIS_MODULE, }; +/** + * intel_gpio_to_pin() - Translate from GPIO offset to pin number + * @pctrl: Pinctrl structure + * @offset: GPIO offset from gpiolib + * @commmunity: Community is filled here if not %NULL + * @padgrp: Pad group is filled here if not %NULL + * + * When coming through gpiolib irqchip, the GPIO offset is not + * automatically translated to pinctrl pin number. This function can be + * used to find out the corresponding pinctrl pin. + */ +static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned offset, + const struct intel_community **community, + const struct intel_padgroup **padgrp) +{ + int i; + + for (i = 0; i < pctrl->ncommunities; i++) { + const struct intel_community *comm = &pctrl->communities[i]; + int j; + + for (j = 0; j < comm->ngpps; j++) { + const struct intel_padgroup *pgrp = &comm->gpps[j]; + + if (pgrp->gpio_base < 0) + continue; + + if (offset >= pgrp->gpio_base && + offset < pgrp->gpio_base + pgrp->size) { + int pin; + + pin = pgrp->base + offset - pgrp->gpio_base; + if (community) + *community = comm; + if (padgrp) + *padgrp = pgrp; + + return pin; + } + } + } + + return -EINVAL; +} + static int intel_gpio_get(struct gpio_chip *chip, unsigned offset) { struct intel_pinctrl *pctrl = gpiochip_get_data(chip); void __iomem *reg; u32 padcfg0; + int pin; + + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL); + if (pin < 0) + return -EINVAL; - reg = intel_get_padcfg(pctrl, offset, PADCFG0); + reg = intel_get_padcfg(pctrl, pin, PADCFG0); if (!reg) return -EINVAL; @@ -770,8 +820,13 @@ static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value) unsigned long flags; void __iomem *reg; u32 padcfg0; + int pin; + + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL); + if (pin < 0) + return; - reg = intel_get_padcfg(pctrl, offset, PADCFG0); + reg = intel_get_padcfg(pctrl, pin, PADCFG0); if (!reg) return; @@ -790,8 +845,13 @@ static int intel_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) struct intel_pinctrl *pctrl = gpiochip_get_data(chip); void __iomem *reg; u32 padcfg0; + int pin; - reg = intel_get_padcfg(pctrl, offset, PADCFG0); + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL); + if (pin < 0) + return -EINVAL; + + reg = intel_get_padcfg(pctrl, pin, PADCFG0); if (!reg) return -EINVAL; @@ -827,51 +887,6 @@ static const struct gpio_chip intel_gpio_chip = { .set_config = gpiochip_generic_config, }; -/** - * intel_gpio_to_pin() - Translate from GPIO offset to pin number - * @pctrl: Pinctrl structure - * @offset: GPIO offset from gpiolib - * @commmunity: Community is filled here if not %NULL - * @padgrp: Pad group is filled here if not %NULL - * - * When coming through gpiolib irqchip, the GPIO offset is not - * automatically translated to pinctrl pin number. This function can be - * used to find out the corresponding pinctrl pin. - */ -static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned offset, - const struct intel_community **community, - const struct intel_padgroup **padgrp) -{ - int i; - - for (i = 0; i < pctrl->ncommunities; i++) { - const struct intel_community *comm = &pctrl->communities[i]; - int j; - - for (j = 0; j < comm->ngpps; j++) { - const struct intel_padgroup *pgrp = &comm->gpps[j]; - - if (pgrp->gpio_base < 0) - continue; - - if (offset >= pgrp->gpio_base && - offset < pgrp->gpio_base + pgrp->size) { - int pin; - - pin = pgrp->base + offset - pgrp->gpio_base; - if (community) - *community = comm; - if (padgrp) - *padgrp = pgrp; - - return pin; - } - } - } - - return -EINVAL; -} - static int intel_gpio_irq_reqres(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); -- cgit v1.2.3-59-g8ed1b From caaa4c8a6be2a275bd14f2369ee364978ff74704 Mon Sep 17 00:00:00 2001 From: Amber Lin Date: Wed, 12 Sep 2018 21:42:18 -0400 Subject: drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher Signed-off-by: Amber Lin Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c index ea3f698aef5e..9803b91f3e77 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c @@ -685,7 +685,7 @@ static int kgd_hqd_sdma_destroy(struct kgd_dev *kgd, void *mqd, while (true) { temp = RREG32(sdma_base_addr + mmSDMA0_RLC0_CONTEXT_STATUS); - if (temp & SDMA0_STATUS_REG__RB_CMD_IDLE__SHIFT) + if (temp & SDMA0_RLC0_CONTEXT_STATUS__IDLE_MASK) break; if (time_after(jiffies, end_jiffies)) return -ETIME; -- cgit v1.2.3-59-g8ed1b From 15426dbb65c5b37680d27e84d58a1ed3b8532518 Mon Sep 17 00:00:00 2001 From: Yong Zhao Date: Wed, 12 Sep 2018 21:42:19 -0400 Subject: drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9 CWSR fails on Raven if the control stack is MTYPE_UC, which is used for regular GART mappings. As a workaround we map it using MTYPE_NC. The MEC firmware expects the control stack at one page offset from the start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU added a memory allocation flag just for this purpose. Acked-by: Alex Deucher Signed-off-by: Yong Zhao Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 6 +++++- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 3 ++- drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c | 2 +- drivers/gpu/drm/amd/include/kgd_kfd_interface.h | 2 +- 5 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c index f8bbbb3a9504..0c791e35acf0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c @@ -272,7 +272,7 @@ void amdgpu_amdkfd_gpu_reset(struct kgd_dev *kgd) int alloc_gtt_mem(struct kgd_dev *kgd, size_t size, void **mem_obj, uint64_t *gpu_addr, - void **cpu_ptr) + void **cpu_ptr, bool mqd_gfx9) { struct amdgpu_device *adev = (struct amdgpu_device *)kgd; struct amdgpu_bo *bo = NULL; @@ -287,6 +287,10 @@ int alloc_gtt_mem(struct kgd_dev *kgd, size_t size, bp.flags = AMDGPU_GEM_CREATE_CPU_GTT_USWC; bp.type = ttm_bo_type_kernel; bp.resv = NULL; + + if (mqd_gfx9) + bp.flags |= AMDGPU_GEM_CREATE_MQD_GFX9; + r = amdgpu_bo_create(adev, &bp, &bo); if (r) { dev_err(adev->dev, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h index 2f379c183ed2..cc9aeab5468c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h @@ -136,7 +136,7 @@ void amdgpu_amdkfd_gpu_reset(struct kgd_dev *kgd); /* Shared API */ int alloc_gtt_mem(struct kgd_dev *kgd, size_t size, void **mem_obj, uint64_t *gpu_addr, - void **cpu_ptr); + void **cpu_ptr, bool mqd_gfx9); void free_gtt_mem(struct kgd_dev *kgd, void *mem_obj); void get_local_mem_info(struct kgd_dev *kgd, struct kfd_local_mem_info *mem_info); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 1b048715ab8a..29ac74f40dce 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -457,7 +457,8 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd, if (kfd->kfd2kgd->init_gtt_mem_allocation( kfd->kgd, size, &kfd->gtt_mem, - &kfd->gtt_start_gpu_addr, &kfd->gtt_start_cpu_ptr)){ + &kfd->gtt_start_gpu_addr, &kfd->gtt_start_cpu_ptr, + false)) { dev_err(kfd_device, "Could not allocate %d bytes\n", size); goto out; } diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c index f5fc3675f21e..0cedb37cf513 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c @@ -88,7 +88,7 @@ static int init_mqd(struct mqd_manager *mm, void **mqd, ALIGN(sizeof(struct v9_mqd), PAGE_SIZE), &((*mqd_mem_obj)->gtt_mem), &((*mqd_mem_obj)->gpu_addr), - (void *)&((*mqd_mem_obj)->cpu_ptr)); + (void *)&((*mqd_mem_obj)->cpu_ptr), true); } else retval = kfd_gtt_sa_allocate(mm->dev, sizeof(struct v9_mqd), mqd_mem_obj); diff --git a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h index 14391b06080c..43b82e14007e 100644 --- a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h @@ -292,7 +292,7 @@ struct tile_config { struct kfd2kgd_calls { int (*init_gtt_mem_allocation)(struct kgd_dev *kgd, size_t size, void **mem_obj, uint64_t *gpu_addr, - void **cpu_ptr); + void **cpu_ptr, bool mqd_gfx9); void (*free_gtt_mem)(struct kgd_dev *kgd, void *mem_obj); -- cgit v1.2.3-59-g8ed1b From 44d8cc6f1a905e4bb1d4221a898abb0d7e9d100a Mon Sep 17 00:00:00 2001 From: Yong Zhao Date: Wed, 12 Sep 2018 21:42:20 -0400 Subject: drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: Alex Deucher Signed-off-by: Yong Zhao Reviewed-by: Felix Kuehling Signed-off-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_iommu.c | 13 ++++++++++++- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 1 + drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 21 ++++++++++++++++----- 3 files changed, 29 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c index 7a61f38c09e6..01494752c36a 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_iommu.c @@ -62,9 +62,20 @@ int kfd_iommu_device_init(struct kfd_dev *kfd) struct amd_iommu_device_info iommu_info; unsigned int pasid_limit; int err; + struct kfd_topology_device *top_dev; - if (!kfd->device_info->needs_iommu_device) + top_dev = kfd_topology_device_by_id(kfd->id); + + /* + * Overwrite ATS capability according to needs_iommu_device to fix + * potential missing corresponding bit in CRAT of BIOS. + */ + if (!kfd->device_info->needs_iommu_device) { + top_dev->node_props.capability &= ~HSA_CAP_ATS_PRESENT; return 0; + } + + top_dev->node_props.capability |= HSA_CAP_ATS_PRESENT; iommu_info.flags = 0; err = amd_iommu_device_info(kfd->pdev, &iommu_info); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index f971710f1c91..92b285ca73aa 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -806,6 +806,7 @@ int kfd_topology_add_device(struct kfd_dev *gpu); int kfd_topology_remove_device(struct kfd_dev *gpu); struct kfd_topology_device *kfd_topology_device_by_proximity_domain( uint32_t proximity_domain); +struct kfd_topology_device *kfd_topology_device_by_id(uint32_t gpu_id); struct kfd_dev *kfd_device_by_id(uint32_t gpu_id); struct kfd_dev *kfd_device_by_pci_dev(const struct pci_dev *pdev); int kfd_topology_enum_kfd_devices(uint8_t idx, struct kfd_dev **kdev); diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index bc95d4dfee2e..80f5db4ef75f 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -63,22 +63,33 @@ struct kfd_topology_device *kfd_topology_device_by_proximity_domain( return device; } -struct kfd_dev *kfd_device_by_id(uint32_t gpu_id) +struct kfd_topology_device *kfd_topology_device_by_id(uint32_t gpu_id) { - struct kfd_topology_device *top_dev; - struct kfd_dev *device = NULL; + struct kfd_topology_device *top_dev = NULL; + struct kfd_topology_device *ret = NULL; down_read(&topology_lock); list_for_each_entry(top_dev, &topology_device_list, list) if (top_dev->gpu_id == gpu_id) { - device = top_dev->gpu; + ret = top_dev; break; } up_read(&topology_lock); - return device; + return ret; +} + +struct kfd_dev *kfd_device_by_id(uint32_t gpu_id) +{ + struct kfd_topology_device *top_dev; + + top_dev = kfd_topology_device_by_id(gpu_id); + if (!top_dev) + return NULL; + + return top_dev->gpu; } struct kfd_dev *kfd_device_by_pci_dev(const struct pci_dev *pdev) -- cgit v1.2.3-59-g8ed1b From fb6de923ca3358a91525552b4907d4cb38730bdd Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Wed, 19 Sep 2018 15:30:51 -0600 Subject: regulator: fix crash caused by null driver data dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 90215f57270f..9577d8941846 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -4395,13 +4395,13 @@ regulator_register(const struct regulator_desc *regulator_desc, !rdev->desc->fixed_uV) rdev->is_switch = true; + dev_set_drvdata(&rdev->dev, rdev); ret = device_register(&rdev->dev); if (ret != 0) { put_device(&rdev->dev); goto unset_supplies; } - dev_set_drvdata(&rdev->dev, rdev); rdev_init_debugfs(rdev); /* try to resolve regulators supply since a new one was registered */ -- cgit v1.2.3-59-g8ed1b From 26b471c7e2f7befd0f59c35b257749ca57e0ed70 Mon Sep 17 00:00:00 2001 From: Liran Alon Date: Sun, 16 Sep 2018 14:28:20 +0300 Subject: KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs The handlers of IOCTLs in kvm_arch_vcpu_ioctl() are expected to set their return value in "r" local var and break out of switch block when they encounter some error. This is because vcpu_load() is called before the switch block which have a proper cleanup of vcpu_put() afterwards. However, KVM_{GET,SET}_NESTED_STATE IOCTLs handlers just return immediately on error without performing above mentioned cleanup. Thus, change these handlers to behave as expected. Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Reviewed-by: Mark Kanda Reviewed-by: Patrick Colp Signed-off-by: Liran Alon Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 4c39ec5fc4fe..edbf00ec56b3 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4010,19 +4010,23 @@ long kvm_arch_vcpu_ioctl(struct file *filp, break; BUILD_BUG_ON(sizeof(user_data_size) != sizeof(user_kvm_nested_state->size)); + r = -EFAULT; if (get_user(user_data_size, &user_kvm_nested_state->size)) - return -EFAULT; + break; r = kvm_x86_ops->get_nested_state(vcpu, user_kvm_nested_state, user_data_size); if (r < 0) - return r; + break; if (r > user_data_size) { if (put_user(r, &user_kvm_nested_state->size)) - return -EFAULT; - return -E2BIG; + r = -EFAULT; + else + r = -E2BIG; + break; } + r = 0; break; } @@ -4034,19 +4038,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp, if (!kvm_x86_ops->set_nested_state) break; + r = -EFAULT; if (copy_from_user(&kvm_state, user_kvm_nested_state, sizeof(kvm_state))) - return -EFAULT; + break; + r = -EINVAL; if (kvm_state.size < sizeof(kvm_state)) - return -EINVAL; + break; if (kvm_state.flags & ~(KVM_STATE_NESTED_RUN_PENDING | KVM_STATE_NESTED_GUEST_MODE)) - return -EINVAL; + break; /* nested_run_pending implies guest_mode. */ if (kvm_state.flags == KVM_STATE_NESTED_RUN_PENDING) - return -EINVAL; + break; r = kvm_x86_ops->set_nested_state(vcpu, user_kvm_nested_state, &kvm_state); break; -- cgit v1.2.3-59-g8ed1b From 8c6ec3613e7b0aade20a3196169c0bab32ed3e3f Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Wed, 19 Sep 2018 19:01:37 +0200 Subject: bnxt_en: don't try to offload VLAN 'modify' action bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Davide Caratti Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 092c817f8f11..e1594c9df4c6 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -75,17 +75,23 @@ static int bnxt_tc_parse_redir(struct bnxt *bp, return 0; } -static void bnxt_tc_parse_vlan(struct bnxt *bp, - struct bnxt_tc_actions *actions, - const struct tc_action *tc_act) +static int bnxt_tc_parse_vlan(struct bnxt *bp, + struct bnxt_tc_actions *actions, + const struct tc_action *tc_act) { - if (tcf_vlan_action(tc_act) == TCA_VLAN_ACT_POP) { + switch (tcf_vlan_action(tc_act)) { + case TCA_VLAN_ACT_POP: actions->flags |= BNXT_TC_ACTION_FLAG_POP_VLAN; - } else if (tcf_vlan_action(tc_act) == TCA_VLAN_ACT_PUSH) { + break; + case TCA_VLAN_ACT_PUSH: actions->flags |= BNXT_TC_ACTION_FLAG_PUSH_VLAN; actions->push_vlan_tci = htons(tcf_vlan_push_vid(tc_act)); actions->push_vlan_tpid = tcf_vlan_push_proto(tc_act); + break; + default: + return -EOPNOTSUPP; } + return 0; } static int bnxt_tc_parse_tunnel_set(struct bnxt *bp, @@ -134,7 +140,9 @@ static int bnxt_tc_parse_actions(struct bnxt *bp, /* Push/pop VLAN */ if (is_tcf_vlan(tc_act)) { - bnxt_tc_parse_vlan(bp, actions, tc_act); + rc = bnxt_tc_parse_vlan(bp, actions, tc_act); + if (rc) + return rc; continue; } -- cgit v1.2.3-59-g8ed1b From d7ab5cdce54da631f0c8c11e506c974536a3581e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 20 Sep 2018 17:27:28 +0800 Subject: sctp: update dst pmtu with the correct daddr When processing pmtu update from an icmp packet, it calls .update_pmtu with sk instead of skb in sctp_transport_update_pmtu. However for sctp, the daddr in the transport might be different from inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or create the route cache. The incorrect daddr will cause a different route cache created for the path. So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr should be updated with the daddr in the transport, and update it back after it's done. The issue has existed since route exceptions introduction. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Reported-by: ian.periam@dialogic.com Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/transport.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 12cac85da994..033696e6f74f 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -260,6 +260,7 @@ void sctp_transport_pmtu(struct sctp_transport *transport, struct sock *sk) bool sctp_transport_update_pmtu(struct sctp_transport *t, u32 pmtu) { struct dst_entry *dst = sctp_transport_dst_check(t); + struct sock *sk = t->asoc->base.sk; bool change = true; if (unlikely(pmtu < SCTP_DEFAULT_MINSEGMENT)) { @@ -271,12 +272,19 @@ bool sctp_transport_update_pmtu(struct sctp_transport *t, u32 pmtu) pmtu = SCTP_TRUNC4(pmtu); if (dst) { - dst->ops->update_pmtu(dst, t->asoc->base.sk, NULL, pmtu); + struct sctp_pf *pf = sctp_get_pf_specific(dst->ops->family); + union sctp_addr addr; + + pf->af->from_sk(&addr, sk); + pf->to_sk_daddr(&t->ipaddr, sk); + dst->ops->update_pmtu(dst, sk, NULL, pmtu); + pf->to_sk_daddr(&addr, sk); + dst = sctp_transport_dst_check(t); } if (!dst) { - t->af_specific->get_dst(t, &t->saddr, &t->fl, t->asoc->base.sk); + t->af_specific->get_dst(t, &t->saddr, &t->fl, sk); dst = t->dst; } -- cgit v1.2.3-59-g8ed1b From 60489f085574157c343fc62a32f997fe7346a659 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 20 Sep 2018 09:31:10 +0200 Subject: spi: spi-mem: Add missing description for data.nbytes field Add a description for spi_mem_op.data.nbytes to the kerneldoc header. Fixes: c36ff266dc82 ("spi: Extend the core to ease integration of SPI memory controllers") Signed-off-by: Boris Brezillon Signed-off-by: Mark Brown --- include/linux/spi/spi-mem.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 62722fb7472d..0cfbb1ad8d96 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -79,6 +79,8 @@ enum spi_mem_data_dir { * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes * @data.buswidth: number of IO lanes used to send/receive the data * @data.dir: direction of the transfer + * @data.nbytes: number of data bytes to send/receive. Can be zero if the + * operation does not involve transferring data * @data.buf.in: input buffer * @data.buf.out: output buffer */ -- cgit v1.2.3-59-g8ed1b From c949a8e8b43f2c75567269bcc9a50d704ae3c420 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 20 Sep 2018 09:31:11 +0200 Subject: spi: spi-mem: Move the DMA-able constraint doc to the kerneldoc header We'd better have that documented in the kerneldoc header, so that it's exposed to the doc generated by Sphinx. Signed-off-by: Boris Brezillon Signed-off-by: Mark Brown --- include/linux/spi/spi-mem.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 0cfbb1ad8d96..7195fbc234aa 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -81,8 +81,8 @@ enum spi_mem_data_dir { * @data.dir: direction of the transfer * @data.nbytes: number of data bytes to send/receive. Can be zero if the * operation does not involve transferring data - * @data.buf.in: input buffer - * @data.buf.out: output buffer + * @data.buf.in: input buffer (must be DMA-able) + * @data.buf.out: output buffer (must be DMA-able) */ struct spi_mem_op { struct { @@ -105,7 +105,6 @@ struct spi_mem_op { u8 buswidth; enum spi_mem_data_dir dir; unsigned int nbytes; - /* buf.{in,out} must be DMA-able. */ union { void *in; const void *out; -- cgit v1.2.3-59-g8ed1b From 37f31b6ca4311b94d985fb398a72e5399ad57925 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 3 Sep 2018 23:06:23 +0200 Subject: ubifs: Check for name being NULL while mounting The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger --- fs/ubifs/super.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 23e7042666a7..87d08f738632 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1954,6 +1954,9 @@ static struct ubi_volume_desc *open_ubi(const char *name, int mode) int dev, vol; char *endptr; + if (!name || !*name) + return ERR_PTR(-EINVAL); + /* First, try to open using the device node path method */ ubi = ubi_open_volume_path(name, mode); if (!IS_ERR(ubi)) -- cgit v1.2.3-59-g8ed1b From d3bdc016c598e09a4ddf17805d17d43759b0a582 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 12 Sep 2018 14:51:38 +0200 Subject: ubifs: drop false positive assertion The following sequence triggers ubifs_assert(c, c->lst.taken_empty_lebs > 0); at the end of ubifs_remount_fs(): mount -t ubifs /dev/ubi0_0 /mnt echo 1 > /sys/kernel/debug/ubifs/ubi0_0/ro_error umount /mnt mount -t ubifs -o ro /dev/ubix_y /mnt mount -o remount,ro /mnt The resulting UBIFS assert failed in ubifs_remount_fs at 1878 (pid 161) is a false positive. In the case above c->lst.taken_empty_lebs has never been changed from its initial zero value. This will only happen when the deferred recovery is done. Fix this by doing the assertion only when recovery has been done already. Signed-off-by: Sascha Hauer Signed-off-by: Richard Weinberger --- fs/ubifs/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 87d08f738632..bf000c8aeffb 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1912,7 +1912,9 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) mutex_unlock(&c->bu_mutex); } - ubifs_assert(c, c->lst.taken_empty_lebs > 0); + if (!c->need_recovery) + ubifs_assert(c, c->lst.taken_empty_lebs > 0); + return 0; } -- cgit v1.2.3-59-g8ed1b From f061c1cc404a618858a77aea233fde0aeaad2f2d Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Sun, 16 Sep 2018 23:57:35 +0200 Subject: Revert "ubifs: xattr: Don't operate on deleted inodes" This reverts commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52. UBIFS wants to assert that xattr operations are only issued on files with positive link count. The said patch made this operations return -ENOENT for unlinked files such that the asserts will no longer trigger. This was wrong since xattr operations are perfectly fine on unlinked files. Instead the assertions need to be fixed/removed. Cc: Fixes: 11a6fc3dc743 ("ubifs: xattr: Don't operate on deleted inodes") Reported-by: Koen Vandeputte Tested-by: Joel Stanley Signed-off-by: Richard Weinberger --- fs/ubifs/xattr.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c index 61afdfee4b28..f5ad1ede7990 100644 --- a/fs/ubifs/xattr.c +++ b/fs/ubifs/xattr.c @@ -152,12 +152,6 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, ui->data_len = size; mutex_lock(&host_ui->ui_mutex); - - if (!host->i_nlink) { - err = -ENOENT; - goto out_noent; - } - host->i_ctime = current_time(host); host_ui->xattr_cnt += 1; host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm)); @@ -190,7 +184,6 @@ out_cancel: host_ui->xattr_size -= CALC_XATTR_BYTES(size); host_ui->xattr_names -= fname_len(nm); host_ui->flags &= ~UBIFS_CRYPT_FL; -out_noent: mutex_unlock(&host_ui->ui_mutex); out_free: make_bad_inode(inode); @@ -242,12 +235,6 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, mutex_unlock(&ui->ui_mutex); mutex_lock(&host_ui->ui_mutex); - - if (!host->i_nlink) { - err = -ENOENT; - goto out_noent; - } - host->i_ctime = current_time(host); host_ui->xattr_size -= CALC_XATTR_BYTES(old_size); host_ui->xattr_size += CALC_XATTR_BYTES(size); @@ -269,7 +256,6 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, out_cancel: host_ui->xattr_size -= CALC_XATTR_BYTES(size); host_ui->xattr_size += CALC_XATTR_BYTES(old_size); -out_noent: mutex_unlock(&host_ui->ui_mutex); make_bad_inode(inode); out_free: @@ -496,12 +482,6 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host, return err; mutex_lock(&host_ui->ui_mutex); - - if (!host->i_nlink) { - err = -ENOENT; - goto out_noent; - } - host->i_ctime = current_time(host); host_ui->xattr_cnt -= 1; host_ui->xattr_size -= CALC_DENT_SIZE(fname_len(nm)); @@ -521,7 +501,6 @@ out_cancel: host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm)); host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len); host_ui->xattr_names += fname_len(nm); -out_noent: mutex_unlock(&host_ui->ui_mutex); ubifs_release_budget(c, &req); make_bad_inode(inode); @@ -561,9 +540,6 @@ static int ubifs_xattr_remove(struct inode *host, const char *name) ubifs_assert(c, inode_is_locked(host)); - if (!host->i_nlink) - return -ENOENT; - if (fname_len(&nm) > UBIFS_MAX_NLEN) return -ENAMETOOLONG; -- cgit v1.2.3-59-g8ed1b From a8b3bb338e4ee4cc84a2b9a6fdf27049b84baa59 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Thu, 20 Sep 2018 12:37:08 -0700 Subject: x86/intel_rdt: Add Reinette as co-maintainer for RDT Reinette Chatre is doing great job on enabling pseudo-locking and other features in RDT. Add her as co-maintainer for RDT. Suggested-by: Thomas Gleixner Signed-off-by: Fenghua Yu Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar Acked-by: Reinette Chatre Cc: "H Peter Anvin" Cc: "Tony Luck" Link: https://lkml.kernel.org/r/1537472228-221799-1-git-send-email-fenghua.yu@intel.com --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 091e66b60cd2..140ea6ee3ac8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12260,6 +12260,7 @@ F: Documentation/networking/rds.txt RDT - RESOURCE ALLOCATION M: Fenghua Yu +M: Reinette Chatre L: linux-kernel@vger.kernel.org S: Supported F: arch/x86/kernel/cpu/intel_rdt* -- cgit v1.2.3-59-g8ed1b From 9068a427ee0beb1365a0925e8c33f338f09f5e97 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 19 Sep 2018 14:33:14 +0200 Subject: MAINTAINERS: Add X86 MM entry Dave, Andy and Peter are de facto overseing the mm parts of X86. Add an explicit maintainers entry. Signed-off-by: Thomas Gleixner Acked-by: Dave Hansen Acked-by: Andy Lutomirski Acked-by: Peter Zijlstra Acked-by: Ingo Molnar --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 140ea6ee3ac8..80a311252b04 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15943,6 +15943,15 @@ M: Borislav Petkov S: Maintained F: arch/x86/kernel/cpu/microcode/* +X86 MM +M: Dave Hansen +M: Andy Lutomirski +M: Peter Zijlstra +L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/mm +S: Maintained +F: arch/x86/mm/ + X86 PLATFORM DRIVERS M: Darren Hart M: Andy Shevchenko -- cgit v1.2.3-59-g8ed1b From f83606f5eb007adc33bc8541ede00590f477bdeb Mon Sep 17 00:00:00 2001 From: KJ Tsanaktsidis Date: Thu, 20 Sep 2018 12:22:25 -0700 Subject: fork: report pid exhaustion correctly Make the clone and fork syscalls return EAGAIN when the limit on the number of pids /proc/sys/kernel/pid_max is exceeded. Currently, when the pid_max limit is exceeded, the kernel will return ENOSPC from the fork and clone syscalls. This is contrary to the documented behaviour, which explicitly calls out the pid_max case as one where EAGAIN should be returned. It also leads to really confusing error messages in userspace programs which will complain about a lack of disk space when they fail to create processes/threads for this reason. This error is being returned because alloc_pid() uses the idr api to find a new pid; when there are none available, idr_alloc_cyclic() returns -ENOSPC, and this is being propagated back to userspace. This behaviour has been broken before, and was explicitly fixed in commit 35f71bc0a09a ("fork: report pid reservation failure properly"), so I think -EAGAIN is definitely the right thing to return in this case. The current behaviour change dates from commit 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") and was I believe unintentional. This patch has no impact on the case where allocating a pid fails because the child reaper for the namespace is dead; that case will still return -ENOMEM. Link: http://lkml.kernel.org/r/20180903111016.46461-1-ktsanaktsidis@zendesk.com Fixes: 95846ecf9dac ("pid: replace pid bitmap implementation with IDR AIP") Signed-off-by: KJ Tsanaktsidis Reviewed-by: Andrew Morton Acked-by: Michal Hocko Cc: Gargi Sharma Cc: Rik van Riel Cc: Oleg Nesterov Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- kernel/pid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/pid.c b/kernel/pid.c index de1cfc4f75a2..cdf63e53a014 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -195,7 +195,7 @@ struct pid *alloc_pid(struct pid_namespace *ns) idr_preload_end(); if (nr < 0) { - retval = nr; + retval = (nr == -ENOSPC) ? -EAGAIN : nr; goto out_free; } -- cgit v1.2.3-59-g8ed1b From 889c695d419f19e5db52592dafbaf26143c36d1f Mon Sep 17 00:00:00 2001 From: Pasha Tatashin Date: Thu, 20 Sep 2018 12:22:30 -0700 Subject: mm: disable deferred struct page for 32-bit arches Deferred struct page init is needed only on systems with large amount of physical memory to improve boot performance. 32-bit systems do not benefit from this feature. Jiri reported a problem where deferred struct pages do not work well with x86-32: [ 0.035162] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.035725] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.036269] Initializing CPU#0 [ 0.036513] Initializing HighMem for node 0 (00036ffe:0007ffe0) [ 0.038459] page:f6780000 is uninitialized and poisoned [ 0.038460] raw: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 0.039509] page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page)) [ 0.040038] ------------[ cut here ]------------ [ 0.040399] kernel BUG at include/linux/page-flags.h:293! [ 0.040823] invalid opcode: 0000 [#1] SMP PTI [ 0.041166] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc1_pt_jiri #9 [ 0.041694] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 0.042496] EIP: free_highmem_page+0x64/0x80 [ 0.042839] Code: 13 46 d8 c1 e8 18 5d 83 e0 03 8d 04 c0 c1 e0 06 ff 80 ec 5f 44 d8 c3 8d b4 26 00 00 00 00 ba 08 65 28 d8 89 d8 e8 fc 71 02 00 <0f> 0b 8d 76 00 8d bc 27 00 00 00 00 ba d0 b1 26 d8 89 d8 e8 e4 71 [ 0.044338] EAX: 0000003c EBX: f6780000 ECX: 00000000 EDX: d856cbe8 [ 0.044868] ESI: 0007ffe0 EDI: d838df20 EBP: d838df00 ESP: d838defc [ 0.045372] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210086 [ 0.045913] CR0: 80050033 CR2: 00000000 CR3: 18556000 CR4: 00040690 [ 0.046413] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.046913] DR6: fffe0ff0 DR7: 00000400 [ 0.047220] Call Trace: [ 0.047419] add_highpages_with_active_regions+0xbd/0x10d [ 0.047854] set_highmem_pages_init+0x5b/0x71 [ 0.048202] mem_init+0x2b/0x1e8 [ 0.048460] start_kernel+0x1d2/0x425 [ 0.048757] i386_start_kernel+0x93/0x97 [ 0.049073] startup_32_smp+0x164/0x168 [ 0.049379] Modules linked in: [ 0.049626] ---[ end trace 337949378db0abbb ]--- We free highmem pages before their struct pages are initialized: mem_init() set_highmem_pages_init() add_highpages_with_active_regions() free_highmem_page() .. Access uninitialized struct page here.. Because there is no reason to have this feature on 32-bit systems, just disable it. Link: http://lkml.kernel.org/r/20180831150506.31246-1-pavel.tatashin@microsoft.com Fixes: 2e3ca40f03bb ("mm: relax deferred struct page requirements") Signed-off-by: Pavel Tatashin Reported-by: Jiri Slaby Acked-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/Kconfig b/mm/Kconfig index a550635ea5c3..de64ea658716 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -637,6 +637,7 @@ config DEFERRED_STRUCT_PAGE_INIT depends on NO_BOOTMEM depends on SPARSEMEM depends on !NEED_PER_CPU_KM + depends on 64BIT help Ordinarily all struct pages are initialised during early boot in a single thread. On very large machines this can take a considerable -- cgit v1.2.3-59-g8ed1b From a1b3d2f217cf51505858c5c160abef96c3e91721 Mon Sep 17 00:00:00 2001 From: Dominique Martinet Date: Thu, 20 Sep 2018 12:22:35 -0700 Subject: fs/proc/kcore.c: fix invalid memory access in multi-page read optimization The 'm' kcore_list item could point to kclist_head, and it is incorrect to look at m->addr / m->size in this case. There is no choice but to run through the list of entries for every address if we did not find any entry in the previous iteration Reset 'm' to NULL in that case at Omar Sandoval's suggestion. [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1536100702-28706-1-git-send-email-asmadeus@codewreck.org Fixes: bf991c2231117 ("proc/kcore: optimize multiple page reads") Signed-off-by: Dominique Martinet Reviewed-by: Andrew Morton Cc: Omar Sandoval Cc: Alexey Dobriyan Cc: Eric Biederman Cc: James Morse Cc: Bhupesh Sharma Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/proc/kcore.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/proc/kcore.c b/fs/proc/kcore.c index ad72261ee3fe..d297fe4472a9 100644 --- a/fs/proc/kcore.c +++ b/fs/proc/kcore.c @@ -464,6 +464,7 @@ read_kcore(struct file *file, char __user *buffer, size_t buflen, loff_t *fpos) ret = -EFAULT; goto out; } + m = NULL; /* skip the list anchor */ } else if (m->type == KCORE_VMALLOC) { vread(buf, (char *)start, tsz); /* we have to zero-fill user buffer even if no read */ -- cgit v1.2.3-59-g8ed1b From b45d71fb89ab8adfe727b9d0ee188ed58582a647 Mon Sep 17 00:00:00 2001 From: "Joel Fernandes (Google)" Date: Thu, 20 Sep 2018 12:22:39 -0700 Subject: mm: shmem.c: Correctly annotate new inodes for lockdep Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) Reported-by: syzbot Reviewed-by: NeilBrown Suggested-by: NeilBrown Cc: Matthew Wilcox Cc: Peter Zijlstra Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/shmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index 0376c124b043..446942677cd4 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2227,6 +2227,8 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode mpol_shared_policy_init(&info->policy, NULL); break; } + + lockdep_annotate_inode_mutex_key(inode); } else shmem_free_inode(sb); return inode; -- cgit v1.2.3-59-g8ed1b From 3bf181bc5d8bc86f04ffd538d7fda9e69af1f2c2 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 20 Sep 2018 12:22:43 -0700 Subject: kernel/sys.c: remove duplicated include Link: http://lkml.kernel.org/r/20180821133424.18716-1-yuehaibing@huawei.com Signed-off-by: YueHaibing Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- kernel/sys.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/kernel/sys.c b/kernel/sys.c index cf5c67533ff1..123bd73046ec 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -71,9 +71,6 @@ #include #include -/* Hardening for Spectre-v1 */ -#include - #include "uid16.h" #ifndef SET_UNALIGN_CTL -- cgit v1.2.3-59-g8ed1b From 172b06c32b949759fe6313abec514bc4f15014f4 Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Thu, 20 Sep 2018 12:22:46 -0700 Subject: mm: slowly shrink slabs with a relatively small number of objects 9092c71bb724 ("mm: use sc->priority for slab shrink targets") changed the way that the target slab pressure is calculated and made it priority-based: delta = freeable >> priority; delta *= 4; do_div(delta, shrinker->seeks); The problem is that on a default priority (which is 12) no pressure is applied at all, if the number of potentially reclaimable objects is less than 4096 (1<<12). This causes the last objects on slab caches of no longer used cgroups to (almost) never get reclaimed. It's obviously a waste of memory. It can be especially painful, if these stale objects are holding a reference to a dying cgroup. Slab LRU lists are reparented on memcg offlining, but corresponding objects are still holding a reference to the dying cgroup. If we don't scan these objects, the dying cgroup can't go away. Most likely, the parent cgroup hasn't any directly charged objects, only remaining objects from dying children cgroups. So it can easily hold a reference to hundreds of dying cgroups. If there are no big spikes in memory pressure, and new memory cgroups are created and destroyed periodically, this causes the number of dying cgroups grow steadily, causing a slow-ish and hard-to-detect memory "leak". It's not a real leak, as the memory can be eventually reclaimed, but it could not happen in a real life at all. I've seen hosts with a steadily climbing number of dying cgroups, which doesn't show any signs of a decline in months, despite the host is loaded with a production workload. It is an obvious waste of memory, and to prevent it, let's apply a minimal pressure even on small shrinker lists. E.g. if there are freeable objects, let's scan at least min(freeable, scan_batch) objects. This fix significantly improves a chance of a dying cgroup to be reclaimed, and together with some previous patches stops the steady growth of the dying cgroups number on some of our hosts. Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com Fixes: 9092c71bb724 ("mm: use sc->priority for slab shrink targets") Signed-off-by: Roman Gushchin Acked-by: Rik van Riel Cc: Josef Bacik Cc: Johannes Weiner Cc: Shakeel Butt Cc: Michal Hocko Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/vmscan.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/mm/vmscan.c b/mm/vmscan.c index 7e7d25504651..c7ce2c161225 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -476,6 +476,17 @@ static unsigned long do_shrink_slab(struct shrink_control *shrinkctl, delta = freeable >> priority; delta *= 4; do_div(delta, shrinker->seeks); + + /* + * Make sure we apply some minimal pressure on default priority + * even on small cgroups. Stale objects are not only consuming memory + * by themselves, but can also hold a reference to a dying cgroup, + * preventing it from being reclaimed. A dying cgroup with all + * corresponding structures like per-cpu stats and kmem caches + * can be really big, so it may lead to a significant waste of memory. + */ + delta = max_t(unsigned long long, delta, min(freeable, batch_size)); + total_scan += delta; if (total_scan < 0) { pr_err("shrink_slab: %pF negative objects to delete nr=%ld\n", -- cgit v1.2.3-59-g8ed1b From 234b69e3e089d850a98e7b3145bd00e9b52b1111 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 20 Sep 2018 12:22:51 -0700 Subject: ocfs2: fix ocfs2 read block panic While reading block, it is possible that io error return due to underlying storage issue, in this case, BH_NeedsValidate was left in the buffer head. Then when reading the very block next time, if it was already linked into journal, that will trigger the following panic. [203748.702517] kernel BUG at fs/ocfs2/buffer_head_io.c:342! [203748.702533] invalid opcode: 0000 [#1] SMP [203748.702561] Modules linked in: ocfs2 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc dm_switch dm_queue_length dm_multipath bonding be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i iw_cxgb4 cxgb4 cxgb3i libcxgbi iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_devintf iTCO_wdt iTCO_vendor_support dcdbas ipmi_ssif i2c_core ipmi_si ipmi_msghandler acpi_pad pcspkr sb_edac edac_core lpc_ich mfd_core shpchp sg tg3 ptp pps_core ext4 jbd2 mbcache2 sr_mod cdrom sd_mod ahci libahci megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [203748.703024] CPU: 7 PID: 38369 Comm: touch Not tainted 4.1.12-124.18.6.el6uek.x86_64 #2 [203748.703045] Hardware name: Dell Inc. PowerEdge R620/0PXXHP, BIOS 2.5.2 01/28/2015 [203748.703067] task: ffff880768139c00 ti: ffff88006ff48000 task.ti: ffff88006ff48000 [203748.703088] RIP: 0010:[] [] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.703130] RSP: 0018:ffff88006ff4b818 EFLAGS: 00010206 [203748.703389] RAX: 0000000008620029 RBX: ffff88006ff4b910 RCX: 0000000000000000 [203748.703885] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000023079fe [203748.704382] RBP: ffff88006ff4b8d8 R08: 0000000000000000 R09: ffff8807578c25b0 [203748.704877] R10: 000000000f637376 R11: 000000003030322e R12: 0000000000000000 [203748.705373] R13: ffff88006ff4b910 R14: ffff880732fe38f0 R15: 0000000000000000 [203748.705871] FS: 00007f401992c700(0000) GS:ffff880bfebc0000(0000) knlGS:0000000000000000 [203748.706370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [203748.706627] CR2: 00007f4019252440 CR3: 00000000a621e000 CR4: 0000000000060670 [203748.707124] Stack: [203748.707371] ffff88006ff4b828 ffffffffa0609f52 ffff88006ff4b838 0000000000000001 [203748.707885] 0000000000000000 0000000000000000 ffff880bf67c3800 ffffffffa05eca00 [203748.708399] 00000000023079ff ffffffff81c58b80 0000000000000000 0000000000000000 [203748.708915] Call Trace: [203748.709175] [] ? ocfs2_inode_cache_io_unlock+0x12/0x20 [ocfs2] [203748.709680] [] ? ocfs2_empty_dir_filldir+0x80/0x80 [ocfs2] [203748.710185] [] ocfs2_read_dir_block_direct+0x3b/0x200 [ocfs2] [203748.710691] [] ocfs2_prepare_dx_dir_for_insert.isra.57+0x19f/0xf60 [ocfs2] [203748.711204] [] ? ocfs2_metadata_cache_io_unlock+0x1f/0x30 [ocfs2] [203748.711716] [] ocfs2_prepare_dir_for_insert+0x13a/0x890 [ocfs2] [203748.712227] [] ? ocfs2_check_dir_for_entry+0x8e/0x140 [ocfs2] [203748.712737] [] ocfs2_mknod+0x4b2/0x1370 [ocfs2] [203748.713003] [] ocfs2_create+0x65/0x170 [ocfs2] [203748.713263] [] vfs_create+0xdb/0x150 [203748.713518] [] do_last+0x815/0x1210 [203748.713772] [] ? path_init+0xb9/0x450 [203748.714123] [] path_openat+0x80/0x600 [203748.714378] [] ? handle_pte_fault+0xd15/0x1620 [203748.714634] [] do_filp_open+0x3a/0xb0 [203748.714888] [] ? __alloc_fd+0xa7/0x130 [203748.715143] [] do_sys_open+0x12c/0x220 [203748.715403] [] ? syscall_trace_enter_phase1+0x11b/0x180 [203748.715668] [] ? system_call_after_swapgs+0xe9/0x190 [203748.715928] [] SyS_open+0x1e/0x20 [203748.716184] [] system_call_fastpath+0x18/0xd7 [203748.716440] Code: 00 00 48 8b 7b 08 48 83 c3 10 45 89 f8 44 89 e1 44 89 f2 4c 89 ee e8 07 06 11 e1 48 8b 03 48 85 c0 75 df 8b 5d c8 e9 4d fa ff ff <0f> 0b 48 8b 7d a0 e8 dc c6 06 00 48 b8 00 00 00 00 00 00 00 10 [203748.717505] RIP [] ocfs2_read_blocks+0x669/0x7f0 [ocfs2] [203748.717775] RSP Joesph ever reported a similar panic. Link: https://oss.oracle.com/pipermail/ocfs2-devel/2013-May/008931.html Link: http://lkml.kernel.org/r/20180912063207.29484-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Cc: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Changwei Ge Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/buffer_head_io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index d9ebe11c8990..1d098c3c00e0 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -342,6 +342,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr, * for this bh as it's not marked locally * uptodate. */ status = -EIO; + clear_buffer_needs_validate(bh); put_bh(bh); bhs[i] = NULL; continue; -- cgit v1.2.3-59-g8ed1b From 05ab1d8a4b36ee912b7087c6da127439ed0a903e Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 20 Sep 2018 10:58:28 +0800 Subject: x86/mm: Expand static page table for fixmap space We met a kernel panic when enabling earlycon, which is due to the fixmap address of earlycon is not statically setup. Currently the static fixmap setup in head_64.S only covers 2M virtual address space, while it actually could be in 4M space with different kernel configurations, e.g. when VSYSCALL emulation is disabled. So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2, and add a build time check to ensure that the fixmap is covered by the initial static page tables. Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable") Suggested-by: Thomas Gleixner Signed-off-by: Feng Tang Signed-off-by: Thomas Gleixner Tested-by: kernel test robot Reviewed-by: Juergen Gross (Xen parts) Cc: H Peter Anvin Cc: Peter Zijlstra Cc: Michal Hocko Cc: Yinghai Lu Cc: Dave Hansen Cc: Andi Kleen Cc: Andy Lutomirsky Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com --- arch/x86/include/asm/fixmap.h | 10 ++++++++++ arch/x86/include/asm/pgtable_64.h | 3 ++- arch/x86/kernel/head64.c | 4 +++- arch/x86/kernel/head_64.S | 16 ++++++++++++---- arch/x86/mm/pgtable.c | 9 +++++++++ arch/x86/xen/mmu_pv.c | 8 ++++++-- 6 files changed, 42 insertions(+), 8 deletions(-) diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index e203169931c7..6390bd8c141b 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -14,6 +14,16 @@ #ifndef _ASM_X86_FIXMAP_H #define _ASM_X86_FIXMAP_H +/* + * Exposed to assembly code for setting up initial page tables. Cannot be + * calculated in assembly code (fixmap entries are an enum), but is sanity + * checked in the actual fixmap C code to make sure that the fixmap is + * covered fully. + */ +#define FIXMAP_PMD_NUM 2 +/* fixmap starts downwards from the 507th entry in level2_fixmap_pgt */ +#define FIXMAP_PMD_TOP 507 + #ifndef __ASSEMBLY__ #include #include diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index ce2b59047cb8..9c85b54bf03c 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -14,6 +14,7 @@ #include #include #include +#include extern p4d_t level4_kernel_pgt[512]; extern p4d_t level4_ident_pgt[512]; @@ -22,7 +23,7 @@ extern pud_t level3_ident_pgt[512]; extern pmd_t level2_kernel_pgt[512]; extern pmd_t level2_fixmap_pgt[512]; extern pmd_t level2_ident_pgt[512]; -extern pte_t level1_fixmap_pgt[512]; +extern pte_t level1_fixmap_pgt[512 * FIXMAP_PMD_NUM]; extern pgd_t init_top_pgt[]; #define swapper_pg_dir init_top_pgt diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index c16af27eb23f..ddee1f0870c4 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -35,6 +35,7 @@ #include #include #include +#include /* * Manage page tables very early on. @@ -166,7 +167,8 @@ unsigned long __head __startup_64(unsigned long physaddr, pud[511] += load_delta; pmd = fixup_pointer(level2_fixmap_pgt, physaddr); - pmd[506] += load_delta; + for (i = FIXMAP_PMD_TOP; i > FIXMAP_PMD_TOP - FIXMAP_PMD_NUM; i--) + pmd[i] += load_delta; /* * Set up the identity mapping for the switchover. These diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 15ebc2fc166e..a3618cf04cf6 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -24,6 +24,7 @@ #include "../entry/calling.h" #include #include +#include #ifdef CONFIG_PARAVIRT #include @@ -445,13 +446,20 @@ NEXT_PAGE(level2_kernel_pgt) KERNEL_IMAGE_SIZE/PMD_SIZE) NEXT_PAGE(level2_fixmap_pgt) - .fill 506,8,0 - .quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC - /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */ - .fill 5,8,0 + .fill (512 - 4 - FIXMAP_PMD_NUM),8,0 + pgtno = 0 + .rept (FIXMAP_PMD_NUM) + .quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \ + + _PAGE_TABLE_NOENC; + pgtno = pgtno + 1 + .endr + /* 6 MB reserved space + a 2MB hole */ + .fill 4,8,0 NEXT_PAGE(level1_fixmap_pgt) + .rept (FIXMAP_PMD_NUM) .fill 512,8,0 + .endr #undef PMDS diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index ae394552fb94..089e78c4effd 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -637,6 +637,15 @@ void __native_set_fixmap(enum fixed_addresses idx, pte_t pte) { unsigned long address = __fix_to_virt(idx); +#ifdef CONFIG_X86_64 + /* + * Ensure that the static initial page tables are covering the + * fixmap completely. + */ + BUILD_BUG_ON(__end_of_permanent_fixed_addresses > + (FIXMAP_PMD_NUM * PTRS_PER_PTE)); +#endif + if (idx >= __end_of_fixed_addresses) { BUG(); return; diff --git a/arch/x86/xen/mmu_pv.c b/arch/x86/xen/mmu_pv.c index 2fe5c9b1816b..dd461c0167ef 100644 --- a/arch/x86/xen/mmu_pv.c +++ b/arch/x86/xen/mmu_pv.c @@ -1907,7 +1907,7 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) /* L3_k[511] -> level2_fixmap_pgt */ convert_pfn_mfn(level3_kernel_pgt); - /* L3_k[511][506] -> level1_fixmap_pgt */ + /* L3_k[511][508-FIXMAP_PMD_NUM ... 507] -> level1_fixmap_pgt */ convert_pfn_mfn(level2_fixmap_pgt); /* We get [511][511] and have Xen's version of level2_kernel_pgt */ @@ -1952,7 +1952,11 @@ void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn) set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO); set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO); set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO); - set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO); + + for (i = 0; i < FIXMAP_PMD_NUM; i++) { + set_page_prot(level1_fixmap_pgt + i * PTRS_PER_PTE, + PAGE_KERNEL_RO); + } /* Pin down new L4 */ pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE, -- cgit v1.2.3-59-g8ed1b From b3027b7746ce1e5a9429715ee6492aca2a6e4cf0 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 19 Sep 2018 17:06:36 +0100 Subject: MAINTAINERS: Move mobiveil PCI driver entry where it belongs Commit 92f9ccca4c08 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver DT bindings") managed to add a MAINTAINERS entry where it does not really belong (ie in the middle of a totally unrelated series of entries and in the wrong alphabetical order). Fix it. Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Cc: Subrahmanya Lingappa --- MAINTAINERS | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f05d2e9ffc84..700408b7bc53 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9716,13 +9716,6 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ S: Maintained F: drivers/media/dvb-frontends/mn88473* -PCI DRIVER FOR MOBIVEIL PCIE IP -M: Subrahmanya Lingappa -L: linux-pci@vger.kernel.org -S: Supported -F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt -F: drivers/pci/controller/pcie-mobiveil.c - MODULE SUPPORT M: Jessica Yu T: git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next @@ -11137,6 +11130,13 @@ F: include/uapi/linux/switchtec_ioctl.h F: include/linux/switchtec.h F: drivers/ntb/hw/mscc/ +PCI DRIVER FOR MOBIVEIL PCIE IP +M: Subrahmanya Lingappa +L: linux-pci@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt +F: drivers/pci/controller/pcie-mobiveil.c + PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support) M: Thomas Petazzoni M: Jason Cooper -- cgit v1.2.3-59-g8ed1b From 9024143e700f89d74b8cdaf316a3499d74fc56fe Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Thu, 20 Sep 2018 16:32:52 -0500 Subject: PCI: dwc: Fix scheduling while atomic issues When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable") Signed-off-by: Jisheng Zhang [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Gustavo Pimentel --- drivers/pci/controller/dwc/pcie-designware.c | 8 ++++---- drivers/pci/controller/dwc/pcie-designware.h | 3 +-- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 778c4f76a884..2153956a0b20 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, if (val & PCIE_ATU_ENABLE) return; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } @@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, if (val & PCIE_ATU_ENABLE) return; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } @@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, if (val & PCIE_ATU_ENABLE) return 0; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Inbound iATU is not being enabled\n"); @@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, if (val & PCIE_ATU_ENABLE) return 0; - usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); + mdelay(LINK_WAIT_IATU); } dev_err(pci->dev, "Inbound iATU is not being enabled\n"); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 96126fd8403c..9f1a5e399b70 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -26,8 +26,7 @@ /* Parameters for the waiting for iATU enabled routine */ #define LINK_WAIT_MAX_IATU_RETRIES 5 -#define LINK_WAIT_IATU_MIN 9000 -#define LINK_WAIT_IATU_MAX 10000 +#define LINK_WAIT_IATU 9 /* Synopsys-specific PCIe configuration registers */ #define PCIE_PORT_LINK_CONTROL 0x710 -- cgit v1.2.3-59-g8ed1b From 4eeed3686981ff887bbdd7254139e2eca276534c Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Tue, 18 Sep 2018 10:51:37 +0300 Subject: RDMA/uverbs: Fix validity check for modify QP Uverbs shouldn't enforce QP state in the command unless the user set the QP state bit in the attribute mask. In addition, only copy qp attr fields which have the corresponding bit set in the attribute mask over to the internal attr structure. Fixes: 88de869bbe4f ("RDMA/uverbs: Ensure validity of current QP state value") Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Majd Dibbiny Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 68 ++++++++++++++++++++++++------------ 1 file changed, 45 insertions(+), 23 deletions(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index a21d5214afc3..e012ca80f9d1 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -2027,33 +2027,55 @@ static int modify_qp(struct ib_uverbs_file *file, if ((cmd->base.attr_mask & IB_QP_CUR_STATE && cmd->base.cur_qp_state > IB_QPS_ERR) || - cmd->base.qp_state > IB_QPS_ERR) { + (cmd->base.attr_mask & IB_QP_STATE && + cmd->base.qp_state > IB_QPS_ERR)) { ret = -EINVAL; goto release_qp; } - attr->qp_state = cmd->base.qp_state; - attr->cur_qp_state = cmd->base.cur_qp_state; - attr->path_mtu = cmd->base.path_mtu; - attr->path_mig_state = cmd->base.path_mig_state; - attr->qkey = cmd->base.qkey; - attr->rq_psn = cmd->base.rq_psn; - attr->sq_psn = cmd->base.sq_psn; - attr->dest_qp_num = cmd->base.dest_qp_num; - attr->qp_access_flags = cmd->base.qp_access_flags; - attr->pkey_index = cmd->base.pkey_index; - attr->alt_pkey_index = cmd->base.alt_pkey_index; - attr->en_sqd_async_notify = cmd->base.en_sqd_async_notify; - attr->max_rd_atomic = cmd->base.max_rd_atomic; - attr->max_dest_rd_atomic = cmd->base.max_dest_rd_atomic; - attr->min_rnr_timer = cmd->base.min_rnr_timer; - attr->port_num = cmd->base.port_num; - attr->timeout = cmd->base.timeout; - attr->retry_cnt = cmd->base.retry_cnt; - attr->rnr_retry = cmd->base.rnr_retry; - attr->alt_port_num = cmd->base.alt_port_num; - attr->alt_timeout = cmd->base.alt_timeout; - attr->rate_limit = cmd->rate_limit; + if (cmd->base.attr_mask & IB_QP_STATE) + attr->qp_state = cmd->base.qp_state; + if (cmd->base.attr_mask & IB_QP_CUR_STATE) + attr->cur_qp_state = cmd->base.cur_qp_state; + if (cmd->base.attr_mask & IB_QP_PATH_MTU) + attr->path_mtu = cmd->base.path_mtu; + if (cmd->base.attr_mask & IB_QP_PATH_MIG_STATE) + attr->path_mig_state = cmd->base.path_mig_state; + if (cmd->base.attr_mask & IB_QP_QKEY) + attr->qkey = cmd->base.qkey; + if (cmd->base.attr_mask & IB_QP_RQ_PSN) + attr->rq_psn = cmd->base.rq_psn; + if (cmd->base.attr_mask & IB_QP_SQ_PSN) + attr->sq_psn = cmd->base.sq_psn; + if (cmd->base.attr_mask & IB_QP_DEST_QPN) + attr->dest_qp_num = cmd->base.dest_qp_num; + if (cmd->base.attr_mask & IB_QP_ACCESS_FLAGS) + attr->qp_access_flags = cmd->base.qp_access_flags; + if (cmd->base.attr_mask & IB_QP_PKEY_INDEX) + attr->pkey_index = cmd->base.pkey_index; + if (cmd->base.attr_mask & IB_QP_EN_SQD_ASYNC_NOTIFY) + attr->en_sqd_async_notify = cmd->base.en_sqd_async_notify; + if (cmd->base.attr_mask & IB_QP_MAX_QP_RD_ATOMIC) + attr->max_rd_atomic = cmd->base.max_rd_atomic; + if (cmd->base.attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) + attr->max_dest_rd_atomic = cmd->base.max_dest_rd_atomic; + if (cmd->base.attr_mask & IB_QP_MIN_RNR_TIMER) + attr->min_rnr_timer = cmd->base.min_rnr_timer; + if (cmd->base.attr_mask & IB_QP_PORT) + attr->port_num = cmd->base.port_num; + if (cmd->base.attr_mask & IB_QP_TIMEOUT) + attr->timeout = cmd->base.timeout; + if (cmd->base.attr_mask & IB_QP_RETRY_CNT) + attr->retry_cnt = cmd->base.retry_cnt; + if (cmd->base.attr_mask & IB_QP_RNR_RETRY) + attr->rnr_retry = cmd->base.rnr_retry; + if (cmd->base.attr_mask & IB_QP_ALT_PATH) { + attr->alt_port_num = cmd->base.alt_port_num; + attr->alt_timeout = cmd->base.alt_timeout; + attr->alt_pkey_index = cmd->base.alt_pkey_index; + } + if (cmd->base.attr_mask & IB_QP_RATE_LIMIT) + attr->rate_limit = cmd->rate_limit; if (cmd->base.attr_mask & IB_QP_AV) copy_ah_attr_from_uverbs(qp->device, &attr->ah_attr, -- cgit v1.2.3-59-g8ed1b From 0dbfaa9f2813787679e296eb5476e40938ab48c8 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Thu, 20 Sep 2018 12:58:46 -0700 Subject: IB/hfi1: Fix SL array bounds check The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Ira Weiny Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/verbs.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c index 13374c727b14..a7c586a5589d 100644 --- a/drivers/infiniband/hw/hfi1/verbs.c +++ b/drivers/infiniband/hw/hfi1/verbs.c @@ -1582,6 +1582,7 @@ static int hfi1_check_ah(struct ib_device *ibdev, struct rdma_ah_attr *ah_attr) struct hfi1_pportdata *ppd; struct hfi1_devdata *dd; u8 sc5; + u8 sl; if (hfi1_check_mcast(rdma_ah_get_dlid(ah_attr)) && !(rdma_ah_get_ah_flags(ah_attr) & IB_AH_GRH)) @@ -1590,8 +1591,13 @@ static int hfi1_check_ah(struct ib_device *ibdev, struct rdma_ah_attr *ah_attr) /* test the mapping for validity */ ibp = to_iport(ibdev, rdma_ah_get_port_num(ah_attr)); ppd = ppd_from_ibp(ibp); - sc5 = ibp->sl_to_sc[rdma_ah_get_sl(ah_attr)]; dd = dd_from_ppd(ppd); + + sl = rdma_ah_get_sl(ah_attr); + if (sl >= ARRAY_SIZE(ibp->sl_to_sc)) + return -EINVAL; + + sc5 = ibp->sl_to_sc[sl]; if (sc_to_vlt(dd, sc5) > num_vls && sc_to_vlt(dd, sc5) != 0xf) return -EINVAL; return 0; -- cgit v1.2.3-59-g8ed1b From 94694d18cf27a6faad91487a38ce516c2b16e7d9 Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Thu, 20 Sep 2018 12:58:56 -0700 Subject: IB/hfi1: Invalid user input can result in crash If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[] [] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [] ? gup_pud_range+0x140/0x290 [] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [] hfi1_aio_write+0xba/0x110 [hfi1] [] do_sync_readv_writev+0x7b/0xd0 [] do_readv_writev+0xce/0x260 [] ? tty_ldisc_deref+0x19/0x20 [] ? n_tty_ioctl+0xe0/0xe0 [] vfs_writev+0x35/0x60 [] SyS_writev+0x7f/0x110 [] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [] __sdma_txclean+0x57/0x1e0 [hfi1] RSP CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn Reviewed-by: Lukasz Odzioba Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/user_sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c index a3a7b33196d6..5c88706121c1 100644 --- a/drivers/infiniband/hw/hfi1/user_sdma.c +++ b/drivers/infiniband/hw/hfi1/user_sdma.c @@ -828,7 +828,7 @@ static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts) if (READ_ONCE(iovec->offset) == iovec->iov.iov_len) { if (++req->iov_idx == req->data_iovs) { ret = -EFAULT; - goto free_txreq; + goto free_tx; } iovec = &req->iovs[req->iov_idx]; WARN_ON(iovec->offset); -- cgit v1.2.3-59-g8ed1b From d623500b3c4efd8d4e945ac9003c6b87b469a9ab Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Thu, 20 Sep 2018 12:59:05 -0700 Subject: IB/hfi1: Fix context recovery when PBC has an UnsupportedVL If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn Reviewed-by: Lukasz Odzioba Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/pio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index c2c1cba5b23b..cd962c9ea6bc 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -86,6 +86,7 @@ void pio_send_control(struct hfi1_devdata *dd, int op) unsigned long flags; int write = 1; /* write sendctrl back */ int flush = 0; /* re-read sendctrl to make sure it is flushed */ + int i; spin_lock_irqsave(&dd->sendctrl_lock, flags); @@ -95,9 +96,13 @@ void pio_send_control(struct hfi1_devdata *dd, int op) reg |= SEND_CTRL_SEND_ENABLE_SMASK; /* Fall through */ case PSC_DATA_VL_ENABLE: + mask = 0; + for (i = 0; i < ARRAY_SIZE(dd->vld); i++) + if (!dd->vld[i].mtu) + mask |= BIT_ULL(i); /* Disallow sending on VLs not enabled */ - mask = (((~0ull) << num_vls) & SEND_CTRL_UNSUPPORTED_VL_MASK) << - SEND_CTRL_UNSUPPORTED_VL_SHIFT; + mask = (mask & SEND_CTRL_UNSUPPORTED_VL_MASK) << + SEND_CTRL_UNSUPPORTED_VL_SHIFT; reg = (reg & ~SEND_CTRL_UNSUPPORTED_VL_SMASK) | mask; break; case PSC_GLOBAL_DISABLE: -- cgit v1.2.3-59-g8ed1b From b4a4957d3d1c328b733fce783b7264996f866ad2 Mon Sep 17 00:00:00 2001 From: "Michael J. Ruhl" Date: Thu, 20 Sep 2018 12:59:14 -0700 Subject: IB/hfi1: Fix destroy_qp hang after a link down rvt_destroy_qp() cannot complete until all in process packets have been released from the underlying hardware. If a link down event occurs, an application can hang with a kernel stack similar to: cat /proc//stack quiesce_qp+0x178/0x250 [hfi1] rvt_reset_qp+0x23d/0x400 [rdmavt] rvt_destroy_qp+0x69/0x210 [rdmavt] ib_destroy_qp+0xba/0x1c0 [ib_core] nvme_rdma_destroy_queue_ib+0x46/0x80 [nvme_rdma] nvme_rdma_free_queue+0x3c/0xd0 [nvme_rdma] nvme_rdma_destroy_io_queues+0x88/0xd0 [nvme_rdma] nvme_rdma_error_recovery_work+0x52/0xf0 [nvme_rdma] process_one_work+0x17a/0x440 worker_thread+0x126/0x3c0 kthread+0xcf/0xe0 ret_from_fork+0x58/0x90 0xffffffffffffffff quiesce_qp() waits until all outstanding packets have been freed. This wait should be momentary. During a link down event, the cleanup handling does not ensure that all packets caught by the link down are flushed properly. This is caused by the fact that the freeze path and the link down event is handled the same. This is not correct. The freeze path waits until the HFI is unfrozen and then restarts PIO. A link down is not a freeze event. The link down path cannot restart the PIO until link is restored. If the PIO path is restarted before the link comes up, the application (QP) using the PIO path will hang (until link is restored). Fix by separating the linkdown path from the freeze path and use the link down path for link down events. Close a race condition sc_disable() by acquiring both the progress and release locks. Close a race condition in sc_stop() by moving the setting of the flag bits under the alloc lock. Cc: # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn Signed-off-by: Michael J. Ruhl Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/chip.c | 6 +++++- drivers/infiniband/hw/hfi1/pio.c | 42 +++++++++++++++++++++++++++++++-------- drivers/infiniband/hw/hfi1/pio.h | 2 ++ 3 files changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 2c19bf772451..e1668bcc2d13 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -6733,6 +6733,7 @@ void start_freeze_handling(struct hfi1_pportdata *ppd, int flags) struct hfi1_devdata *dd = ppd->dd; struct send_context *sc; int i; + int sc_flags; if (flags & FREEZE_SELF) write_csr(dd, CCE_CTRL, CCE_CTRL_SPC_FREEZE_SMASK); @@ -6743,11 +6744,13 @@ void start_freeze_handling(struct hfi1_pportdata *ppd, int flags) /* notify all SDMA engines that they are going into a freeze */ sdma_freeze_notify(dd, !!(flags & FREEZE_LINK_DOWN)); + sc_flags = SCF_FROZEN | SCF_HALTED | (flags & FREEZE_LINK_DOWN ? + SCF_LINK_DOWN : 0); /* do halt pre-handling on all enabled send contexts */ for (i = 0; i < dd->num_send_contexts; i++) { sc = dd->send_contexts[i].sc; if (sc && (sc->flags & SCF_ENABLED)) - sc_stop(sc, SCF_FROZEN | SCF_HALTED); + sc_stop(sc, sc_flags); } /* Send context are frozen. Notify user space */ @@ -10674,6 +10677,7 @@ int set_link_state(struct hfi1_pportdata *ppd, u32 state) add_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK); handle_linkup_change(dd, 1); + pio_kernel_linkup(dd); /* * After link up, a new link width will have been set. diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index cd962c9ea6bc..752057647f09 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -926,20 +926,18 @@ void sc_free(struct send_context *sc) void sc_disable(struct send_context *sc) { u64 reg; - unsigned long flags; struct pio_buf *pbuf; if (!sc) return; /* do all steps, even if already disabled */ - spin_lock_irqsave(&sc->alloc_lock, flags); + spin_lock_irq(&sc->alloc_lock); reg = read_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL)); reg &= ~SC(CTRL_CTXT_ENABLE_SMASK); sc->flags &= ~SCF_ENABLED; sc_wait_for_packet_egress(sc, 1); write_kctxt_csr(sc->dd, sc->hw_context, SC(CTRL), reg); - spin_unlock_irqrestore(&sc->alloc_lock, flags); /* * Flush any waiters. Once the context is disabled, @@ -949,7 +947,7 @@ void sc_disable(struct send_context *sc) * proceed with the flush. */ udelay(1); - spin_lock_irqsave(&sc->release_lock, flags); + spin_lock(&sc->release_lock); if (sc->sr) { /* this context has a shadow ring */ while (sc->sr_tail != sc->sr_head) { pbuf = &sc->sr[sc->sr_tail].pbuf; @@ -960,7 +958,8 @@ void sc_disable(struct send_context *sc) sc->sr_tail = 0; } } - spin_unlock_irqrestore(&sc->release_lock, flags); + spin_unlock(&sc->release_lock); + spin_unlock_irq(&sc->alloc_lock); } /* return SendEgressCtxtStatus.PacketOccupancy */ @@ -1183,11 +1182,39 @@ void pio_kernel_unfreeze(struct hfi1_devdata *dd) sc = dd->send_contexts[i].sc; if (!sc || !(sc->flags & SCF_FROZEN) || sc->type == SC_USER) continue; + if (sc->flags & SCF_LINK_DOWN) + continue; sc_enable(sc); /* will clear the sc frozen flag */ } } +/** + * pio_kernel_linkup() - Re-enable send contexts after linkup event + * @dd: valid devive data + * + * When the link goes down, the freeze path is taken. However, a link down + * event is different from a freeze because if the send context is re-enabled + * whowever is sending data will start sending data again, which will hang + * any QP that is sending data. + * + * The freeze path now looks at the type of event that occurs and takes this + * path for link down event. + */ +void pio_kernel_linkup(struct hfi1_devdata *dd) +{ + struct send_context *sc; + int i; + + for (i = 0; i < dd->num_send_contexts; i++) { + sc = dd->send_contexts[i].sc; + if (!sc || !(sc->flags & SCF_LINK_DOWN) || sc->type == SC_USER) + continue; + + sc_enable(sc); /* will clear the sc link down flag */ + } +} + /* * Wait for the SendPioInitCtxt.PioInitInProgress bit to clear. * Returns: @@ -1387,11 +1414,10 @@ void sc_stop(struct send_context *sc, int flag) { unsigned long flags; - /* mark the context */ - sc->flags |= flag; - /* stop buffer allocations */ spin_lock_irqsave(&sc->alloc_lock, flags); + /* mark the context */ + sc->flags |= flag; sc->flags &= ~SCF_ENABLED; spin_unlock_irqrestore(&sc->alloc_lock, flags); wake_up(&sc->halt_wait); diff --git a/drivers/infiniband/hw/hfi1/pio.h b/drivers/infiniband/hw/hfi1/pio.h index 058b08f459ab..aaf372c3e5d6 100644 --- a/drivers/infiniband/hw/hfi1/pio.h +++ b/drivers/infiniband/hw/hfi1/pio.h @@ -139,6 +139,7 @@ struct send_context { #define SCF_IN_FREE 0x02 #define SCF_HALTED 0x04 #define SCF_FROZEN 0x08 +#define SCF_LINK_DOWN 0x10 struct send_context_info { struct send_context *sc; /* allocated working context */ @@ -306,6 +307,7 @@ void set_pio_integrity(struct send_context *sc); void pio_reset_all(struct hfi1_devdata *dd); void pio_freeze(struct hfi1_devdata *dd); void pio_kernel_unfreeze(struct hfi1_devdata *dd); +void pio_kernel_linkup(struct hfi1_devdata *dd); /* global PIO send control operations */ #define PSC_GLOBAL_ENABLE 0 -- cgit v1.2.3-59-g8ed1b From d87161bea405e3260377026ca8a704a3f68bd67a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 13 Sep 2018 14:28:48 +0300 Subject: scsi: ufs: Disable blk-mq for now blk-mq does not support runtime pm, so disable blk-mq support for now. Fixes: d5038a13eca7 ("scsi: core: switch to scsi-mq by default") Signed-off-by: Adrian Hunter Acked-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/ufs/ufshcd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9d5d2ca7fc4f..c55f38ec391c 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -7940,6 +7940,13 @@ int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) err = -ENOMEM; goto out_error; } + + /* + * Do not use blk-mq at this time because blk-mq does not support + * runtime pm. + */ + host->use_blk_mq = false; + hba = shost_priv(host); hba->host = host; hba->dev = dev; -- cgit v1.2.3-59-g8ed1b From 9e210178267b80c4eeb832fade7e146a18c84915 Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 13 Sep 2018 15:41:10 -0700 Subject: scsi: lpfc: Synchronize access to remoteport via rport The driver currently uses the ndlp to get the local rport which is then used to get the nvme transport remoteport pointer. There can be cases where a stale remoteport pointer is obtained as synchronization isn't done through the different dereferences. Correct by using locks to synchronize the dereferences. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_attr.c | 15 ++++++++++----- drivers/scsi/lpfc/lpfc_debugfs.c | 10 +++++----- drivers/scsi/lpfc/lpfc_nvme.c | 11 ++++++++--- 3 files changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 057a60abe664..1a6ed9b0a249 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -360,12 +360,12 @@ lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr, goto buffer_done; list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { + nrport = NULL; + spin_lock(&vport->phba->hbalock); rport = lpfc_ndlp_get_nrport(ndlp); - if (!rport) - continue; - - /* local short-hand pointer. */ - nrport = rport->remoteport; + if (rport) + nrport = rport->remoteport; + spin_unlock(&vport->phba->hbalock); if (!nrport) continue; @@ -3386,6 +3386,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) struct lpfc_nodelist *ndlp; #if (IS_ENABLED(CONFIG_NVME_FC)) struct lpfc_nvme_rport *rport; + struct nvme_fc_remote_port *remoteport = NULL; #endif shost = lpfc_shost_from_vport(vport); @@ -3396,8 +3397,12 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport) if (ndlp->rport) ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo; #if (IS_ENABLED(CONFIG_NVME_FC)) + spin_lock(&vport->phba->hbalock); rport = lpfc_ndlp_get_nrport(ndlp); if (rport) + remoteport = rport->remoteport; + spin_unlock(&vport->phba->hbalock); + if (remoteport) nvme_fc_set_remoteport_devloss(rport->remoteport, vport->cfg_devloss_tmo); #endif diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 9df0c051349f..aec5b10a8c85 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -551,7 +551,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) unsigned char *statep; struct nvme_fc_local_port *localport; struct lpfc_nvmet_tgtport *tgtp; - struct nvme_fc_remote_port *nrport; + struct nvme_fc_remote_port *nrport = NULL; struct lpfc_nvme_rport *rport; cnt = (LPFC_NODELIST_SIZE / LPFC_NODELIST_ENTRY_SIZE); @@ -696,11 +696,11 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) len += snprintf(buf + len, size - len, "\tRport List:\n"); list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { /* local short-hand pointer. */ + spin_lock(&phba->hbalock); rport = lpfc_ndlp_get_nrport(ndlp); - if (!rport) - continue; - - nrport = rport->remoteport; + if (rport) + nrport = rport->remoteport; + spin_unlock(&phba->hbalock); if (!nrport) continue; diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c index 028462e5994d..918ae18ef8a8 100644 --- a/drivers/scsi/lpfc/lpfc_nvme.c +++ b/drivers/scsi/lpfc/lpfc_nvme.c @@ -2725,7 +2725,9 @@ lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); + spin_lock_irq(&vport->phba->hbalock); oldrport = lpfc_ndlp_get_nrport(ndlp); + spin_unlock_irq(&vport->phba->hbalock); if (!oldrport) lpfc_nlp_get(ndlp); @@ -2840,7 +2842,7 @@ lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) struct nvme_fc_local_port *localport; struct lpfc_nvme_lport *lport; struct lpfc_nvme_rport *rport; - struct nvme_fc_remote_port *remoteport; + struct nvme_fc_remote_port *remoteport = NULL; localport = vport->localport; @@ -2854,11 +2856,14 @@ lpfc_nvme_unregister_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) if (!lport) goto input_err; + spin_lock_irq(&vport->phba->hbalock); rport = lpfc_ndlp_get_nrport(ndlp); - if (!rport) + if (rport) + remoteport = rport->remoteport; + spin_unlock_irq(&vport->phba->hbalock); + if (!remoteport) goto input_err; - remoteport = rport->remoteport; lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC, "6033 Unreg nvme remoteport %p, portname x%llx, " "port_id x%06x, portstate x%x port type x%x\n", -- cgit v1.2.3-59-g8ed1b From 10bc6a6042c900934a097988b5d50e3cf3f91781 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 20 Sep 2018 22:47:09 +0200 Subject: r8169: fix autoneg issue on resume with RTL8168E It was reported that chip version 33 (RTL8168E) ends up with 10MBit/Half on a 1GBit link after resuming from S3 (with different link partners). For whatever reason the PHY on this chip doesn't properly start a renegotiation when soft-reset. Explicitly requesting a renegotiation fixes this. Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii") Signed-off-by: Heiner Kallweit Reported-by: Neil MacLeod Tested-by: Neil MacLeod Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index bb529ff2ca81..ab30aaeac6d3 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4071,6 +4071,15 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) phy_speed_up(dev->phydev); genphy_soft_reset(dev->phydev); + + /* It was reported that chip version 33 ends up with 10MBit/Half on a + * 1GBit link after resuming from S3. For whatever reason the PHY on + * this chip doesn't properly start a renegotiation when soft-reset. + * Explicitly requesting a renegotiation fixes this. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_33 && + dev->phydev->autoneg == AUTONEG_ENABLE) + phy_restart_aneg(dev->phydev); } static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr) -- cgit v1.2.3-59-g8ed1b From 69be1984ded00a11b1ed0888c6d8e4f35370372f Mon Sep 17 00:00:00 2001 From: Alexandru Gheorghe Date: Mon, 16 Jul 2018 11:07:07 +0100 Subject: drm: mali-dp: Call drm_crtc_vblank_reset on device init Currently, if userspace calls drm_wait_vblank before the crtc is activated the crtc vblank_enable hook is called, which in case of malidp driver triggers some warninngs. This happens because on device init we don't inform the drm core about the vblank state by calling drm_crtc_vblank_on/off/reset which together with drm_vblank_get have some magic that prevents calling drm_vblank_enable when crtc is off. Signed-off-by: Alexandru Gheorghe Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c index 08b5bb219816..94d6dabec2dc 100644 --- a/drivers/gpu/drm/arm/malidp_drv.c +++ b/drivers/gpu/drm/arm/malidp_drv.c @@ -754,6 +754,7 @@ static int malidp_bind(struct device *dev) drm->irq_enabled = true; ret = drm_vblank_init(drm, drm->mode_config.num_crtc); + drm_crtc_vblank_reset(&malidp->crtc); if (ret < 0) { DRM_ERROR("failed to initialise vblank\n"); goto vblank_fail; -- cgit v1.2.3-59-g8ed1b From 89578d04b52c872aef6b1257b5f6caf6bcc35abe Mon Sep 17 00:00:00 2001 From: Alexandru Gheorghe Date: Wed, 22 Aug 2018 16:18:19 +0100 Subject: drm/malidp: Fix writeback in NV12 When we want to writeback to memory in NV12 format we need to program the RGB2YUV coefficients. Currently, we don't program the coefficients and NV12 doesn't work at all. This patchset fixes that by programming a sane default(bt709, limited range) as rgb2yuv coefficients. In the long run, probably we need to think of a way for userspace to be able to program that, but for now I think this is better than not working at all or not advertising NV12 as a supported format for memwrite. Changes since v1: - Write the rgb2yuv coefficients only once, since we don't change them at all, just write them the first time NV12 is programmed, suggested by Brian Starkey, here [1] [1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html Signed-off-by: Alexandru Gheorghe Acked-by: Liviu Dudau Signed-off-by: Liviu Dudau --- drivers/gpu/drm/arm/malidp_hw.c | 25 +++++++++++++++++++++++-- drivers/gpu/drm/arm/malidp_hw.h | 3 ++- drivers/gpu/drm/arm/malidp_mw.c | 25 +++++++++++++++++++++---- drivers/gpu/drm/arm/malidp_regs.h | 2 ++ 4 files changed, 48 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index c94a4422e0e9..2781e462c1ed 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -384,7 +384,8 @@ static long malidp500_se_calc_mclk(struct malidp_hw_device *hwdev, static int malidp500_enable_memwrite(struct malidp_hw_device *hwdev, dma_addr_t *addrs, s32 *pitches, - int num_planes, u16 w, u16 h, u32 fmt_id) + int num_planes, u16 w, u16 h, u32 fmt_id, + const s16 *rgb2yuv_coeffs) { u32 base = MALIDP500_SE_MEMWRITE_BASE; u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK); @@ -416,6 +417,16 @@ static int malidp500_enable_memwrite(struct malidp_hw_device *hwdev, malidp_hw_write(hwdev, MALIDP_DE_H_ACTIVE(w) | MALIDP_DE_V_ACTIVE(h), MALIDP500_SE_MEMWRITE_OUT_SIZE); + + if (rgb2yuv_coeffs) { + int i; + + for (i = 0; i < MALIDP_COLORADJ_NUM_COEFFS; i++) { + malidp_hw_write(hwdev, rgb2yuv_coeffs[i], + MALIDP500_SE_RGB_YUV_COEFFS + i * 4); + } + } + malidp_hw_setbits(hwdev, MALIDP_SE_MEMWRITE_EN, MALIDP500_SE_CONTROL); return 0; @@ -658,7 +669,8 @@ static long malidp550_se_calc_mclk(struct malidp_hw_device *hwdev, static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev, dma_addr_t *addrs, s32 *pitches, - int num_planes, u16 w, u16 h, u32 fmt_id) + int num_planes, u16 w, u16 h, u32 fmt_id, + const s16 *rgb2yuv_coeffs) { u32 base = MALIDP550_SE_MEMWRITE_BASE; u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK); @@ -689,6 +701,15 @@ static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev, malidp_hw_setbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN, MALIDP550_SE_CONTROL); + if (rgb2yuv_coeffs) { + int i; + + for (i = 0; i < MALIDP_COLORADJ_NUM_COEFFS; i++) { + malidp_hw_write(hwdev, rgb2yuv_coeffs[i], + MALIDP550_SE_RGB_YUV_COEFFS + i * 4); + } + } + return 0; } diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h index ad2e96915d44..9fc94c08190f 100644 --- a/drivers/gpu/drm/arm/malidp_hw.h +++ b/drivers/gpu/drm/arm/malidp_hw.h @@ -191,7 +191,8 @@ struct malidp_hw { * @param fmt_id - internal format ID of output buffer */ int (*enable_memwrite)(struct malidp_hw_device *hwdev, dma_addr_t *addrs, - s32 *pitches, int num_planes, u16 w, u16 h, u32 fmt_id); + s32 *pitches, int num_planes, u16 w, u16 h, u32 fmt_id, + const s16 *rgb2yuv_coeffs); /* * Disable the writing to memory of the next frame's content. diff --git a/drivers/gpu/drm/arm/malidp_mw.c b/drivers/gpu/drm/arm/malidp_mw.c index ba6ae66387c9..91472e5e0c8b 100644 --- a/drivers/gpu/drm/arm/malidp_mw.c +++ b/drivers/gpu/drm/arm/malidp_mw.c @@ -26,6 +26,8 @@ struct malidp_mw_connector_state { s32 pitches[2]; u8 format; u8 n_planes; + bool rgb2yuv_initialized; + const s16 *rgb2yuv_coeffs; }; static int malidp_mw_connector_get_modes(struct drm_connector *connector) @@ -84,7 +86,7 @@ static void malidp_mw_connector_destroy(struct drm_connector *connector) static struct drm_connector_state * malidp_mw_connector_duplicate_state(struct drm_connector *connector) { - struct malidp_mw_connector_state *mw_state; + struct malidp_mw_connector_state *mw_state, *mw_current_state; if (WARN_ON(!connector->state)) return NULL; @@ -93,7 +95,10 @@ malidp_mw_connector_duplicate_state(struct drm_connector *connector) if (!mw_state) return NULL; - /* No need to preserve any of our driver-local data */ + mw_current_state = to_mw_state(connector->state); + mw_state->rgb2yuv_coeffs = mw_current_state->rgb2yuv_coeffs; + mw_state->rgb2yuv_initialized = mw_current_state->rgb2yuv_initialized; + __drm_atomic_helper_connector_duplicate_state(connector, &mw_state->base); return &mw_state->base; @@ -108,6 +113,13 @@ static const struct drm_connector_funcs malidp_mw_connector_funcs = { .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, }; +static const s16 rgb2yuv_coeffs_bt709_limited[MALIDP_COLORADJ_NUM_COEFFS] = { + 47, 157, 16, + -26, -87, 112, + 112, -102, -10, + 16, 128, 128 +}; + static int malidp_mw_encoder_atomic_check(struct drm_encoder *encoder, struct drm_crtc_state *crtc_state, @@ -157,6 +169,9 @@ malidp_mw_encoder_atomic_check(struct drm_encoder *encoder, } mw_state->n_planes = n_planes; + if (fb->format->is_yuv) + mw_state->rgb2yuv_coeffs = rgb2yuv_coeffs_bt709_limited; + return 0; } @@ -239,10 +254,12 @@ void malidp_mw_atomic_commit(struct drm_device *drm, drm_writeback_queue_job(mw_conn, conn_state->writeback_job); conn_state->writeback_job = NULL; - hwdev->hw->enable_memwrite(hwdev, mw_state->addrs, mw_state->pitches, mw_state->n_planes, - fb->width, fb->height, mw_state->format); + fb->width, fb->height, mw_state->format, + !mw_state->rgb2yuv_initialized ? + mw_state->rgb2yuv_coeffs : NULL); + mw_state->rgb2yuv_initialized = !!mw_state->rgb2yuv_coeffs; } else { DRM_DEV_DEBUG_DRIVER(drm->dev, "Disable memwrite\n"); hwdev->hw->disable_memwrite(hwdev); diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h index 3579d36b2a71..6ffe849774f2 100644 --- a/drivers/gpu/drm/arm/malidp_regs.h +++ b/drivers/gpu/drm/arm/malidp_regs.h @@ -205,6 +205,7 @@ #define MALIDP500_SE_BASE 0x00c00 #define MALIDP500_SE_CONTROL 0x00c0c #define MALIDP500_SE_MEMWRITE_OUT_SIZE 0x00c2c +#define MALIDP500_SE_RGB_YUV_COEFFS 0x00C74 #define MALIDP500_SE_MEMWRITE_BASE 0x00e00 #define MALIDP500_DC_IRQ_BASE 0x00f00 #define MALIDP500_CONFIG_VALID 0x00f00 @@ -238,6 +239,7 @@ #define MALIDP550_SE_CONTROL 0x08010 #define MALIDP550_SE_MEMWRITE_ONESHOT (1 << 7) #define MALIDP550_SE_MEMWRITE_OUT_SIZE 0x08030 +#define MALIDP550_SE_RGB_YUV_COEFFS 0x08078 #define MALIDP550_SE_MEMWRITE_BASE 0x08100 #define MALIDP550_DC_BASE 0x0c000 #define MALIDP550_DC_CONTROL 0x0c010 -- cgit v1.2.3-59-g8ed1b From 652ef42c134da1bbb03bd4c9b4291dfaf8d7febb Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 20 Sep 2018 12:08:54 +0200 Subject: net: mscc: fix the frame extraction into the skb When extracting frames from the Ocelot switch, the frame check sequence (FCS) is present at the end of the data extracted. The FCS was put into the sk buffer which introduced some issues (as length related ones), as the FCS shouldn't be part of an Rx sk buffer. This patch fixes the Ocelot switch extraction behaviour by discarding the FCS. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot_board.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c index 26bb3b18f3be..3cdf63e35b53 100644 --- a/drivers/net/ethernet/mscc/ocelot_board.c +++ b/drivers/net/ethernet/mscc/ocelot_board.c @@ -91,7 +91,7 @@ static irqreturn_t ocelot_xtr_irq_handler(int irq, void *arg) struct sk_buff *skb; struct net_device *dev; u32 *buf; - int sz, len; + int sz, len, buf_len; u32 ifh[4]; u32 val; struct frame_info info; @@ -116,14 +116,20 @@ static irqreturn_t ocelot_xtr_irq_handler(int irq, void *arg) err = -ENOMEM; break; } - buf = (u32 *)skb_put(skb, info.len); + buf_len = info.len - ETH_FCS_LEN; + buf = (u32 *)skb_put(skb, buf_len); len = 0; do { sz = ocelot_rx_frame_word(ocelot, grp, false, &val); *buf++ = val; len += sz; - } while ((sz == 4) && (len < info.len)); + } while (len < buf_len); + + /* Read the FCS and discard it */ + sz = ocelot_rx_frame_word(ocelot, grp, false, &val); + /* Update the statistics if part of the FCS was read before */ + len -= ETH_FCS_LEN - sz; if (sz < 0) { err = sz; -- cgit v1.2.3-59-g8ed1b From 1816494330a83f2a064499d8ed2797045641f92c Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sun, 9 Sep 2018 04:09:26 +0000 Subject: scsi: target: iscsi: Use hex2bin instead of a re-implementation This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/target/iscsi/iscsi_target_auth.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c index 9518ffd8b8ba..6c3b4c022894 100644 --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -26,18 +26,6 @@ #include "iscsi_target_nego.h" #include "iscsi_target_auth.h" -static int chap_string_to_hex(unsigned char *dst, unsigned char *src, int len) -{ - int j = DIV_ROUND_UP(len, 2), rc; - - rc = hex2bin(dst, src, j); - if (rc < 0) - pr_debug("CHAP string contains non hex digit symbols\n"); - - dst[j] = '\0'; - return j; -} - static void chap_binaryhex_to_asciihex(char *dst, char *src, int src_len) { int i; @@ -248,9 +236,16 @@ static int chap_server_compute_md5( pr_err("Could not find CHAP_R.\n"); goto out; } + if (strlen(chap_r) != MD5_SIGNATURE_SIZE * 2) { + pr_err("Malformed CHAP_R\n"); + goto out; + } + if (hex2bin(client_digest, chap_r, MD5_SIGNATURE_SIZE) < 0) { + pr_err("Malformed CHAP_R\n"); + goto out; + } pr_debug("[server] Got CHAP_R=%s\n", chap_r); - chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); tfm = crypto_alloc_shash("md5", 0, 0); if (IS_ERR(tfm)) { @@ -349,9 +344,7 @@ static int chap_server_compute_md5( pr_err("Could not find CHAP_C.\n"); goto out; } - pr_debug("[server] Got CHAP_C=%s\n", challenge); - challenge_len = chap_string_to_hex(challenge_binhex, challenge, - strlen(challenge)); + challenge_len = DIV_ROUND_UP(strlen(challenge), 2); if (!challenge_len) { pr_err("Unable to convert incoming challenge\n"); goto out; @@ -360,6 +353,11 @@ static int chap_server_compute_md5( pr_err("CHAP_C exceeds maximum binary size of 1024 bytes\n"); goto out; } + if (hex2bin(challenge_binhex, challenge, challenge_len) < 0) { + pr_err("Malformed CHAP_C\n"); + goto out; + } + pr_debug("[server] Got CHAP_C=%s\n", challenge); /* * During mutual authentication, the CHAP_C generated by the * initiator must not match the original CHAP_C generated by -- cgit v1.2.3-59-g8ed1b From 8c39e2699f8acb2e29782a834e56306da24937fe Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sun, 9 Sep 2018 04:09:27 +0000 Subject: scsi: target: iscsi: Use bin2hex instead of a re-implementation Signed-off-by: Vincent Pelletier Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/target/iscsi/iscsi_target_auth.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c index 6c3b4c022894..4e680d753941 100644 --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -26,15 +26,6 @@ #include "iscsi_target_nego.h" #include "iscsi_target_auth.h" -static void chap_binaryhex_to_asciihex(char *dst, char *src, int src_len) -{ - int i; - - for (i = 0; i < src_len; i++) { - sprintf(&dst[i*2], "%02x", (int) src[i] & 0xff); - } -} - static int chap_gen_challenge( struct iscsi_conn *conn, int caller, @@ -50,7 +41,7 @@ static int chap_gen_challenge( ret = get_random_bytes_wait(chap->challenge, CHAP_CHALLENGE_LENGTH); if (unlikely(ret)) return ret; - chap_binaryhex_to_asciihex(challenge_asciihex, chap->challenge, + bin2hex(challenge_asciihex, chap->challenge, CHAP_CHALLENGE_LENGTH); /* * Set CHAP_C, and copy the generated challenge into c_str. @@ -289,7 +280,7 @@ static int chap_server_compute_md5( goto out; } - chap_binaryhex_to_asciihex(response, server_digest, MD5_SIGNATURE_SIZE); + bin2hex(response, server_digest, MD5_SIGNATURE_SIZE); pr_debug("[server] MD5 Server Digest: %s\n", response); if (memcmp(server_digest, client_digest, MD5_SIGNATURE_SIZE) != 0) { @@ -411,7 +402,7 @@ static int chap_server_compute_md5( /* * Convert response from binary hex to ascii hext. */ - chap_binaryhex_to_asciihex(response, digest, MD5_SIGNATURE_SIZE); + bin2hex(response, digest, MD5_SIGNATURE_SIZE); *nr_out_len += sprintf(nr_out_ptr + *nr_out_len, "CHAP_R=0x%s", response); *nr_out_len += 1; -- cgit v1.2.3-59-g8ed1b From 318ddb34b2052f838aa243d07173e2badf3e630e Mon Sep 17 00:00:00 2001 From: Wen Xiong Date: Thu, 20 Sep 2018 19:32:12 -0500 Subject: scsi: ipr: System hung while dlpar adding primary ipr adapter back While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by: Wen Xiong Acked-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 106 ++++++++++++++++++++++++++++++----------------------- drivers/scsi/ipr.h | 1 + 2 files changed, 62 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index f2ec80b0ffc0..271990bc065b 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3335,6 +3335,65 @@ static void ipr_release_dump(struct kref *kref) LEAVE; } +static void ipr_add_remove_thread(struct work_struct *work) +{ + unsigned long lock_flags; + struct ipr_resource_entry *res; + struct scsi_device *sdev; + struct ipr_ioa_cfg *ioa_cfg = + container_of(work, struct ipr_ioa_cfg, scsi_add_work_q); + u8 bus, target, lun; + int did_work; + + ENTER; + spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); + +restart: + do { + did_work = 0; + if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) { + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return; + } + + list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { + if (res->del_from_ml && res->sdev) { + did_work = 1; + sdev = res->sdev; + if (!scsi_device_get(sdev)) { + if (!res->add_to_ml) + list_move_tail(&res->queue, &ioa_cfg->free_res_q); + else + res->del_from_ml = 0; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + scsi_remove_device(sdev); + scsi_device_put(sdev); + spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); + } + break; + } + } + } while (did_work); + + list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { + if (res->add_to_ml) { + bus = res->bus; + target = res->target; + lun = res->lun; + res->add_to_ml = 0; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + scsi_add_device(ioa_cfg->host, bus, target, lun); + spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); + goto restart; + } + } + + ioa_cfg->scan_done = 1; + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE); + LEAVE; +} + /** * ipr_worker_thread - Worker thread * @work: ioa config struct @@ -3349,13 +3408,9 @@ static void ipr_release_dump(struct kref *kref) static void ipr_worker_thread(struct work_struct *work) { unsigned long lock_flags; - struct ipr_resource_entry *res; - struct scsi_device *sdev; struct ipr_dump *dump; struct ipr_ioa_cfg *ioa_cfg = container_of(work, struct ipr_ioa_cfg, work_q); - u8 bus, target, lun; - int did_work; ENTER; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); @@ -3393,49 +3448,9 @@ static void ipr_worker_thread(struct work_struct *work) return; } -restart: - do { - did_work = 0; - if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) { - spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - return; - } + schedule_work(&ioa_cfg->scsi_add_work_q); - list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { - if (res->del_from_ml && res->sdev) { - did_work = 1; - sdev = res->sdev; - if (!scsi_device_get(sdev)) { - if (!res->add_to_ml) - list_move_tail(&res->queue, &ioa_cfg->free_res_q); - else - res->del_from_ml = 0; - spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - scsi_remove_device(sdev); - scsi_device_put(sdev); - spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - } - break; - } - } - } while (did_work); - - list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { - if (res->add_to_ml) { - bus = res->bus; - target = res->target; - lun = res->lun; - res->add_to_ml = 0; - spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - scsi_add_device(ioa_cfg->host, bus, target, lun); - spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - goto restart; - } - } - - ioa_cfg->scan_done = 1; spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE); LEAVE; } @@ -9933,6 +9948,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg, INIT_LIST_HEAD(&ioa_cfg->free_res_q); INIT_LIST_HEAD(&ioa_cfg->used_res_q); INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread); + INIT_WORK(&ioa_cfg->scsi_add_work_q, ipr_add_remove_thread); init_waitqueue_head(&ioa_cfg->reset_wait_q); init_waitqueue_head(&ioa_cfg->msi_wait_q); init_waitqueue_head(&ioa_cfg->eeh_wait_q); diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 68afbbde54d3..f6baa2351313 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -1575,6 +1575,7 @@ struct ipr_ioa_cfg { u8 saved_mode_page_len; struct work_struct work_q; + struct work_struct scsi_add_work_q; struct workqueue_struct *reset_work_q; wait_queue_head_t reset_wait_q; -- cgit v1.2.3-59-g8ed1b From f1f1fadacaf08b7cf11714c0c29f8fa4d4ef68a9 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Fri, 21 Sep 2018 09:01:01 +0200 Subject: scsi: sd: don't crash the host on invalid commands When sd_init_command() get's a command with a unknown req_op() it crashes the system via BUG(). This makes debugging the actual reason for the broken request cmd_flags pretty hard as the system is down before it's able to write out debugging data on the serial console or the trace buffer. Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and return an I/O error to the producer of the request. Signed-off-by: Johannes Thumshirn Cc: Hannes Reinecke Cc: Bart Van Assche Cc: Christoph Hellwig Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 5e4f10d28065..4a57ffecc7e6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1276,7 +1276,8 @@ static int sd_init_command(struct scsi_cmnd *cmd) case REQ_OP_ZONE_RESET: return sd_zbc_setup_reset_cmnd(cmd); default: - BUG(); + WARN_ON_ONCE(1); + return BLKPREP_KILL; } } -- cgit v1.2.3-59-g8ed1b From 5607fff303636d48b88414c6be353d9fed700af2 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 18 Sep 2018 09:01:44 -0700 Subject: bpf: sockmap only allow ESTABLISHED sock state After this patch we only allow socks that are in ESTABLISHED state or are being added via a sock_ops event that is transitioning into an ESTABLISHED state. By allowing sock_ops events we allow users to manage sockmaps directly from sock ops programs. The two supported sock_ops ops are BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB and BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB. Similar to TLS ULP this ensures sk_user_data is correct. Reported-by: Eric Dumazet Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 488ef9663c01..1f97b559892a 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -2097,8 +2097,12 @@ static int sock_map_update_elem(struct bpf_map *map, return -EINVAL; } + /* ULPs are currently supported only for TCP sockets in ESTABLISHED + * state. + */ if (skops.sk->sk_type != SOCK_STREAM || - skops.sk->sk_protocol != IPPROTO_TCP) { + skops.sk->sk_protocol != IPPROTO_TCP || + skops.sk->sk_state != TCP_ESTABLISHED) { fput(socket->file); return -EOPNOTSUPP; } @@ -2453,6 +2457,16 @@ static int sock_hash_update_elem(struct bpf_map *map, return -EINVAL; } + /* ULPs are currently supported only for TCP sockets in ESTABLISHED + * state. + */ + if (skops.sk->sk_type != SOCK_STREAM || + skops.sk->sk_protocol != IPPROTO_TCP || + skops.sk->sk_state != TCP_ESTABLISHED) { + fput(socket->file); + return -EOPNOTSUPP; + } + lock_sock(skops.sk); preempt_disable(); rcu_read_lock(); @@ -2543,10 +2557,22 @@ const struct bpf_map_ops sock_hash_ops = { .map_check_btf = map_check_no_btf, }; +static bool bpf_is_valid_sock_op(struct bpf_sock_ops_kern *ops) +{ + return ops->op == BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB || + ops->op == BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB; +} BPF_CALL_4(bpf_sock_map_update, struct bpf_sock_ops_kern *, bpf_sock, struct bpf_map *, map, void *, key, u64, flags) { WARN_ON_ONCE(!rcu_read_lock_held()); + + /* ULPs are currently supported only for TCP sockets in ESTABLISHED + * state. This checks that the sock ops triggering the update is + * one indicating we are (or will be soon) in an ESTABLISHED state. + */ + if (!bpf_is_valid_sock_op(bpf_sock)) + return -EOPNOTSUPP; return sock_map_ctx_update_elem(bpf_sock, map, key, flags); } @@ -2565,6 +2591,9 @@ BPF_CALL_4(bpf_sock_hash_update, struct bpf_sock_ops_kern *, bpf_sock, struct bpf_map *, map, void *, key, u64, flags) { WARN_ON_ONCE(!rcu_read_lock_held()); + + if (!bpf_is_valid_sock_op(bpf_sock)) + return -EOPNOTSUPP; return sock_hash_ctx_update_elem(bpf_sock, map, key, flags); } -- cgit v1.2.3-59-g8ed1b From b05545e15e1ff1d6a6a8593971275f9cc3e6b92b Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 18 Sep 2018 09:01:49 -0700 Subject: bpf: sockmap, fix transition through disconnect without close It is possible (via shutdown()) for TCP socks to go trough TCP_CLOSE state via tcp_disconnect() without actually calling tcp_close which would then call our bpf_tcp_close() callback. Because of this a user could disconnect a socket then put it in a LISTEN state which would break our assumptions about sockets always being ESTABLISHED state. To resolve this rely on the unhash hook, which is called in the disconnect case, to remove the sock from the sockmap. Reported-by: Eric Dumazet Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- kernel/bpf/sockmap.c | 60 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 41 insertions(+), 19 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 1f97b559892a..0a0f2ec75370 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -132,6 +132,7 @@ struct smap_psock { struct work_struct gc_work; struct proto *sk_proto; + void (*save_unhash)(struct sock *sk); void (*save_close)(struct sock *sk, long timeout); void (*save_data_ready)(struct sock *sk); void (*save_write_space)(struct sock *sk); @@ -143,6 +144,7 @@ static int bpf_tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, static int bpf_tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); static int bpf_tcp_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); +static void bpf_tcp_unhash(struct sock *sk); static void bpf_tcp_close(struct sock *sk, long timeout); static inline struct smap_psock *smap_psock_sk(const struct sock *sk) @@ -184,6 +186,7 @@ static void build_protos(struct proto prot[SOCKMAP_NUM_CONFIGS], struct proto *base) { prot[SOCKMAP_BASE] = *base; + prot[SOCKMAP_BASE].unhash = bpf_tcp_unhash; prot[SOCKMAP_BASE].close = bpf_tcp_close; prot[SOCKMAP_BASE].recvmsg = bpf_tcp_recvmsg; prot[SOCKMAP_BASE].stream_memory_read = bpf_tcp_stream_read; @@ -217,6 +220,7 @@ static int bpf_tcp_init(struct sock *sk) return -EBUSY; } + psock->save_unhash = sk->sk_prot->unhash; psock->save_close = sk->sk_prot->close; psock->sk_proto = sk->sk_prot; @@ -305,30 +309,12 @@ static struct smap_psock_map_entry *psock_map_pop(struct sock *sk, return e; } -static void bpf_tcp_close(struct sock *sk, long timeout) +static void bpf_tcp_remove(struct sock *sk, struct smap_psock *psock) { - void (*close_fun)(struct sock *sk, long timeout); struct smap_psock_map_entry *e; struct sk_msg_buff *md, *mtmp; - struct smap_psock *psock; struct sock *osk; - lock_sock(sk); - rcu_read_lock(); - psock = smap_psock_sk(sk); - if (unlikely(!psock)) { - rcu_read_unlock(); - release_sock(sk); - return sk->sk_prot->close(sk, timeout); - } - - /* The psock may be destroyed anytime after exiting the RCU critial - * section so by the time we use close_fun the psock may no longer - * be valid. However, bpf_tcp_close is called with the sock lock - * held so the close hook and sk are still valid. - */ - close_fun = psock->save_close; - if (psock->cork) { free_start_sg(psock->sock, psock->cork, true); kfree(psock->cork); @@ -379,6 +365,42 @@ static void bpf_tcp_close(struct sock *sk, long timeout) kfree(e); e = psock_map_pop(sk, psock); } +} + +static void bpf_tcp_unhash(struct sock *sk) +{ + void (*unhash_fun)(struct sock *sk); + struct smap_psock *psock; + + rcu_read_lock(); + psock = smap_psock_sk(sk); + if (unlikely(!psock)) { + rcu_read_unlock(); + if (sk->sk_prot->unhash) + sk->sk_prot->unhash(sk); + return; + } + unhash_fun = psock->save_unhash; + bpf_tcp_remove(sk, psock); + rcu_read_unlock(); + unhash_fun(sk); +} + +static void bpf_tcp_close(struct sock *sk, long timeout) +{ + void (*close_fun)(struct sock *sk, long timeout); + struct smap_psock *psock; + + lock_sock(sk); + rcu_read_lock(); + psock = smap_psock_sk(sk); + if (unlikely(!psock)) { + rcu_read_unlock(); + release_sock(sk); + return sk->sk_prot->close(sk, timeout); + } + close_fun = psock->save_close; + bpf_tcp_remove(sk, psock); rcu_read_unlock(); release_sock(sk); close_fun(sk, timeout); -- cgit v1.2.3-59-g8ed1b From 5028027844cfc6168e39650abecd817ba64c9d98 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Tue, 18 Sep 2018 09:01:54 -0700 Subject: bpf: test_maps, only support ESTABLISHED socks Ensure that sockets added to a sock{map|hash} that is not in the ESTABLISHED state is rejected. Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_maps.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c index 6f54f84144a0..9b552c0fc47d 100644 --- a/tools/testing/selftests/bpf/test_maps.c +++ b/tools/testing/selftests/bpf/test_maps.c @@ -580,7 +580,11 @@ static void test_sockmap(int tasks, void *data) /* Test update without programs */ for (i = 0; i < 6; i++) { err = bpf_map_update_elem(fd, &i, &sfd[i], BPF_ANY); - if (err) { + if (i < 2 && !err) { + printf("Allowed update sockmap '%i:%i' not in ESTABLISHED\n", + i, sfd[i]); + goto out_sockmap; + } else if (i >= 2 && err) { printf("Failed noprog update sockmap '%i:%i'\n", i, sfd[i]); goto out_sockmap; @@ -741,7 +745,7 @@ static void test_sockmap(int tasks, void *data) } /* Test map update elem afterwards fd lives in fd and map_fd */ - for (i = 0; i < 6; i++) { + for (i = 2; i < 6; i++) { err = bpf_map_update_elem(map_fd_rx, &i, &sfd[i], BPF_ANY); if (err) { printf("Failed map_fd_rx update sockmap %i '%i:%i'\n", @@ -845,7 +849,7 @@ static void test_sockmap(int tasks, void *data) } /* Delete the elems without programs */ - for (i = 0; i < 6; i++) { + for (i = 2; i < 6; i++) { err = bpf_map_delete_elem(fd, &i); if (err) { printf("Failed delete sockmap %i '%i:%i'\n", -- cgit v1.2.3-59-g8ed1b From f88b4c01b97e09535505cf3c327fdbce55c27f00 Mon Sep 17 00:00:00 2001 From: Sean Tranchetti Date: Thu, 20 Sep 2018 14:29:45 -0600 Subject: netlabel: check for IPV4MASK in addrinfo_get netlbl_unlabel_addrinfo_get() assumes that if it finds the NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is not necessarily the case as the current checks in netlbl_unlabel_staticadd() and friends are not sufficent to enforce this. If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR, NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes, these functions will all call netlbl_unlabel_addrinfo_get() which will then attempt dereference NULL when fetching the non-existent NLBL_UNLABEL_A_IPV4MASK attribute: Unable to handle kernel NULL pointer dereference at virtual address 0 Process unlab (pid: 31762, stack limit = 0xffffff80502d8000) Call trace: netlbl_unlabel_addrinfo_get+0x44/0xd8 netlbl_unlabel_staticremovedef+0x98/0xe0 genl_rcv_msg+0x354/0x388 netlink_rcv_skb+0xac/0x118 genl_rcv+0x34/0x48 netlink_unicast+0x158/0x1f0 netlink_sendmsg+0x32c/0x338 sock_sendmsg+0x44/0x60 ___sys_sendmsg+0x1d0/0x2a8 __sys_sendmsg+0x64/0xb4 SyS_sendmsg+0x34/0x4c el0_svc_naked+0x34/0x38 Code: 51001149 7100113f 540000a0 f9401508 (79400108) ---[ end trace f6438a488e737143 ]--- Kernel panic - not syncing: Fatal exception Signed-off-by: Sean Tranchetti Signed-off-by: David S. Miller --- net/netlabel/netlabel_unlabeled.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index c070dfc0190a..c92894c3e40a 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -781,7 +781,8 @@ static int netlbl_unlabel_addrinfo_get(struct genl_info *info, { u32 addr_len; - if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR]) { + if (info->attrs[NLBL_UNLABEL_A_IPV4ADDR] && + info->attrs[NLBL_UNLABEL_A_IPV4MASK]) { addr_len = nla_len(info->attrs[NLBL_UNLABEL_A_IPV4ADDR]); if (addr_len != sizeof(struct in_addr) && addr_len != nla_len(info->attrs[NLBL_UNLABEL_A_IPV4MASK])) -- cgit v1.2.3-59-g8ed1b From 86f9bd1ff61c413a2a251fa736463295e4e24733 Mon Sep 17 00:00:00 2001 From: Jeff Barnhill <0xeffeff@gmail.com> Date: Fri, 21 Sep 2018 00:45:27 +0000 Subject: net/ipv6: Display all addresses in output of /proc/net/if_inet6 The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly handle starting/stopping the iteration. The problem is that at some point during the iteration, an overflow is detected and the process is subsequently stopped. The item being shown via seq_printf() when the overflow occurs is not actually shown, though. When start() is subsequently called to resume iterating, it returns the next item, and thus the item that was being processed when the overflow occurred never gets printed. Alter the meaning of the private data member "offset". Currently, when it is not 0 (which only happens at the very beginning), "offset" represents the next hlist item to be printed. After this change, "offset" always represents the current item. This is also consistent with the private data member "bucket", which represents the current bucket, and also the use of "pos" as defined in seq_file.txt: The pos passed to start() will always be either zero, or the most recent pos used in the previous session. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d51a8c0b3372..c63ccce6425f 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4201,7 +4201,6 @@ static struct inet6_ifaddr *if6_get_first(struct seq_file *seq, loff_t pos) p++; continue; } - state->offset++; return ifa; } @@ -4225,13 +4224,12 @@ static struct inet6_ifaddr *if6_get_next(struct seq_file *seq, return ifa; } + state->offset = 0; while (++state->bucket < IN6_ADDR_HSIZE) { - state->offset = 0; hlist_for_each_entry_rcu(ifa, &inet6_addr_lst[state->bucket], addr_lst) { if (!net_eq(dev_net(ifa->idev->dev), net)) continue; - state->offset++; return ifa; } } -- cgit v1.2.3-59-g8ed1b From 54be5b8ce33f8d1a05b258070c81ed98f935883d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 21 Sep 2018 02:53:17 +0000 Subject: PCI: hv: Fix return value check in hv_pci_assign_slots() In case of error, the function pci_create_slot() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a15f2c08c708 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/pci/controller/pci-hyperv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index ee80e79db21a..9ba4d12c179c 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1484,8 +1484,10 @@ static void hv_pci_assign_slots(struct hv_pcibus_device *hbus) snprintf(name, SLOT_NAME_SIZE, "%u", hpdev->desc.ser); hpdev->pci_slot = pci_create_slot(hbus->pci_bus, slot_nr, name, NULL); - if (!hpdev->pci_slot) + if (IS_ERR(hpdev->pci_slot)) { pr_warn("pci_create slot %s failed\n", name); + hpdev->pci_slot = NULL; + } } } -- cgit v1.2.3-59-g8ed1b From 72b462798c2a258725dd741d1c6c139446e20d12 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 10:53:47 +0800 Subject: net: seeq: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/seeq/ether3.c | 5 +++-- drivers/net/ethernet/seeq/sgiseeq.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c index c5bc124b41a9..d1bb73bf9914 100644 --- a/drivers/net/ethernet/seeq/ether3.c +++ b/drivers/net/ethernet/seeq/ether3.c @@ -77,7 +77,8 @@ static void ether3_setmulticastlist(struct net_device *dev); static int ether3_rx(struct net_device *dev, unsigned int maxcnt); static void ether3_tx(struct net_device *dev); static int ether3_open (struct net_device *dev); -static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t ether3_sendpacket(struct sk_buff *skb, + struct net_device *dev); static irqreturn_t ether3_interrupt (int irq, void *dev_id); static int ether3_close (struct net_device *dev); static void ether3_setmulticastlist (struct net_device *dev); @@ -481,7 +482,7 @@ static void ether3_timeout(struct net_device *dev) /* * Transmit a packet */ -static int +static netdev_tx_t ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) { unsigned long flags; diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c index 573691bc3b71..70cce63a6081 100644 --- a/drivers/net/ethernet/seeq/sgiseeq.c +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -578,7 +578,8 @@ static inline int sgiseeq_reset(struct net_device *dev) return 0; } -static int sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t +sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct sgiseeq_private *sp = netdev_priv(dev); struct hpc3_ethregs *hregs = sp->hregs; -- cgit v1.2.3-59-g8ed1b From f3bf939f3d4552becb115d76e17b3e5957bab4a2 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 11:02:37 +0800 Subject: net: cirrus: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/cirrus/ep93xx_eth.c | 2 +- drivers/net/ethernet/cirrus/mac89x0.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cirrus/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c index e2a702996db4..13dfdfca49fc 100644 --- a/drivers/net/ethernet/cirrus/ep93xx_eth.c +++ b/drivers/net/ethernet/cirrus/ep93xx_eth.c @@ -332,7 +332,7 @@ static int ep93xx_poll(struct napi_struct *napi, int budget) return rx; } -static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) { struct ep93xx_priv *ep = netdev_priv(dev); struct ep93xx_tdesc *txd; diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c index 3f8fe8fd79cc..6324e80960c3 100644 --- a/drivers/net/ethernet/cirrus/mac89x0.c +++ b/drivers/net/ethernet/cirrus/mac89x0.c @@ -113,7 +113,7 @@ struct net_local { /* Index to functions, as function prototypes. */ static int net_open(struct net_device *dev); -static int net_send_packet(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev); static irqreturn_t net_interrupt(int irq, void *dev_id); static void set_multicast_list(struct net_device *dev); static void net_rx(struct net_device *dev); @@ -324,7 +324,7 @@ net_open(struct net_device *dev) return 0; } -static int +static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev) { struct net_local *lp = netdev_priv(dev); -- cgit v1.2.3-59-g8ed1b From 28d304efb88f18aadfe9219f0e4b2b0ef9558a3b Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 11:05:50 +0800 Subject: net: sgi: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/sgi/ioc3-eth.c | 4 ++-- drivers/net/ethernet/sgi/meth.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/sgi/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c index 18d533fdf14c..3140999642ba 100644 --- a/drivers/net/ethernet/sgi/ioc3-eth.c +++ b/drivers/net/ethernet/sgi/ioc3-eth.c @@ -99,7 +99,7 @@ struct ioc3_private { static int ioc3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static void ioc3_set_multicast_list(struct net_device *dev); -static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev); static void ioc3_timeout(struct net_device *dev); static inline unsigned int ioc3_hash(const unsigned char *addr); static inline void ioc3_stop(struct ioc3_private *ip); @@ -1390,7 +1390,7 @@ static struct pci_driver ioc3_driver = { .remove = ioc3_remove_one, }; -static int ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t ioc3_start_xmit(struct sk_buff *skb, struct net_device *dev) { unsigned long data; struct ioc3_private *ip = netdev_priv(dev); diff --git a/drivers/net/ethernet/sgi/meth.c b/drivers/net/ethernet/sgi/meth.c index ea55abd62ec7..703fbbefea44 100644 --- a/drivers/net/ethernet/sgi/meth.c +++ b/drivers/net/ethernet/sgi/meth.c @@ -697,7 +697,7 @@ static void meth_add_to_tx_ring(struct meth_private *priv, struct sk_buff *skb) /* * Transmit a packet (called by the kernel) */ -static int meth_tx(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t meth_tx(struct sk_buff *skb, struct net_device *dev) { struct meth_private *priv = netdev_priv(dev); unsigned long flags; -- cgit v1.2.3-59-g8ed1b From f0f25516e3b9efff2a34059347d13361d26e314a Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 11:35:11 +0800 Subject: net: wiznet: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/wiznet/w5100.c | 2 +- drivers/net/ethernet/wiznet/w5300.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c index 2bdfb39215e9..d8ba512f166a 100644 --- a/drivers/net/ethernet/wiznet/w5100.c +++ b/drivers/net/ethernet/wiznet/w5100.c @@ -835,7 +835,7 @@ static void w5100_tx_work(struct work_struct *work) w5100_tx_skb(priv->ndev, skb); } -static int w5100_start_tx(struct sk_buff *skb, struct net_device *ndev) +static netdev_tx_t w5100_start_tx(struct sk_buff *skb, struct net_device *ndev) { struct w5100_priv *priv = netdev_priv(ndev); diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c index 56ae573001e8..80fdbff67d82 100644 --- a/drivers/net/ethernet/wiznet/w5300.c +++ b/drivers/net/ethernet/wiznet/w5300.c @@ -365,7 +365,7 @@ static void w5300_tx_timeout(struct net_device *ndev) netif_wake_queue(ndev); } -static int w5300_start_tx(struct sk_buff *skb, struct net_device *ndev) +static netdev_tx_t w5300_start_tx(struct sk_buff *skb, struct net_device *ndev) { struct w5300_priv *priv = netdev_priv(ndev); -- cgit v1.2.3-59-g8ed1b From 648c361a568dcd098a3496c6c66bca4c8473e52b Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 11:44:05 +0800 Subject: net: i825xx: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/i825xx/ether1.c | 5 +++-- drivers/net/ethernet/i825xx/lib82596.c | 4 ++-- drivers/net/ethernet/i825xx/sun3_82586.c | 6 ++++-- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/i825xx/ether1.c b/drivers/net/ethernet/i825xx/ether1.c index dc983450354b..35f6291a3672 100644 --- a/drivers/net/ethernet/i825xx/ether1.c +++ b/drivers/net/ethernet/i825xx/ether1.c @@ -64,7 +64,8 @@ static unsigned int net_debug = NET_DEBUG; #define RX_AREA_END 0x0fc00 static int ether1_open(struct net_device *dev); -static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t ether1_sendpacket(struct sk_buff *skb, + struct net_device *dev); static irqreturn_t ether1_interrupt(int irq, void *dev_id); static int ether1_close(struct net_device *dev); static void ether1_setmulticastlist(struct net_device *dev); @@ -667,7 +668,7 @@ ether1_timeout(struct net_device *dev) netif_wake_queue(dev); } -static int +static netdev_tx_t ether1_sendpacket (struct sk_buff *skb, struct net_device *dev) { int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr; diff --git a/drivers/net/ethernet/i825xx/lib82596.c b/drivers/net/ethernet/i825xx/lib82596.c index f00a1dc2128c..2f7ae118217f 100644 --- a/drivers/net/ethernet/i825xx/lib82596.c +++ b/drivers/net/ethernet/i825xx/lib82596.c @@ -347,7 +347,7 @@ static const char init_setup[] = 0x7f /* *multi IA */ }; static int i596_open(struct net_device *dev); -static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev); static irqreturn_t i596_interrupt(int irq, void *dev_id); static int i596_close(struct net_device *dev); static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); @@ -966,7 +966,7 @@ static void i596_tx_timeout (struct net_device *dev) } -static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct i596_private *lp = netdev_priv(dev); struct tx_cmd *tx_cmd; diff --git a/drivers/net/ethernet/i825xx/sun3_82586.c b/drivers/net/ethernet/i825xx/sun3_82586.c index 8bb15a8c2a40..1a86184d44c0 100644 --- a/drivers/net/ethernet/i825xx/sun3_82586.c +++ b/drivers/net/ethernet/i825xx/sun3_82586.c @@ -121,7 +121,8 @@ static int sun3_82586_probe1(struct net_device *dev,int ioaddr); static irqreturn_t sun3_82586_interrupt(int irq,void *dev_id); static int sun3_82586_open(struct net_device *dev); static int sun3_82586_close(struct net_device *dev); -static int sun3_82586_send_packet(struct sk_buff *,struct net_device *); +static netdev_tx_t sun3_82586_send_packet(struct sk_buff *, + struct net_device *); static struct net_device_stats *sun3_82586_get_stats(struct net_device *dev); static void set_multicast_list(struct net_device *dev); static void sun3_82586_timeout(struct net_device *dev); @@ -1002,7 +1003,8 @@ static void sun3_82586_timeout(struct net_device *dev) * send frame */ -static int sun3_82586_send_packet(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t +sun3_82586_send_packet(struct sk_buff *skb, struct net_device *dev) { int len,i; #ifndef NO_NOPCOMMANDS -- cgit v1.2.3-59-g8ed1b From e6ce3822a9f264b3f24c1acdc624131fb014f2f0 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 21 Sep 2018 11:46:37 +0800 Subject: net: apple: fix return type of ndo_start_xmit function The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/apple/bmac.c | 4 ++-- drivers/net/ethernet/apple/mace.c | 4 ++-- drivers/net/ethernet/apple/macmace.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c index 024998d6d8c6..6a8e2567f2bd 100644 --- a/drivers/net/ethernet/apple/bmac.c +++ b/drivers/net/ethernet/apple/bmac.c @@ -154,7 +154,7 @@ static irqreturn_t bmac_txdma_intr(int irq, void *dev_id); static irqreturn_t bmac_rxdma_intr(int irq, void *dev_id); static void bmac_set_timeout(struct net_device *dev); static void bmac_tx_timeout(struct timer_list *t); -static int bmac_output(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t bmac_output(struct sk_buff *skb, struct net_device *dev); static void bmac_start(struct net_device *dev); #define DBDMA_SET(x) ( ((x) | (x) << 16) ) @@ -1456,7 +1456,7 @@ bmac_start(struct net_device *dev) spin_unlock_irqrestore(&bp->lock, flags); } -static int +static netdev_tx_t bmac_output(struct sk_buff *skb, struct net_device *dev) { struct bmac_data *bp = netdev_priv(dev); diff --git a/drivers/net/ethernet/apple/mace.c b/drivers/net/ethernet/apple/mace.c index 0b5429d76bcf..68b9ee489489 100644 --- a/drivers/net/ethernet/apple/mace.c +++ b/drivers/net/ethernet/apple/mace.c @@ -78,7 +78,7 @@ struct mace_data { static int mace_open(struct net_device *dev); static int mace_close(struct net_device *dev); -static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev); static void mace_set_multicast(struct net_device *dev); static void mace_reset(struct net_device *dev); static int mace_set_address(struct net_device *dev, void *addr); @@ -525,7 +525,7 @@ static inline void mace_set_timeout(struct net_device *dev) mp->timeout_active = 1; } -static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev) { struct mace_data *mp = netdev_priv(dev); volatile struct dbdma_regs __iomem *td = mp->tx_dma; diff --git a/drivers/net/ethernet/apple/macmace.c b/drivers/net/ethernet/apple/macmace.c index 137cbb470af2..376f2c2613e7 100644 --- a/drivers/net/ethernet/apple/macmace.c +++ b/drivers/net/ethernet/apple/macmace.c @@ -89,7 +89,7 @@ struct mace_frame { static int mace_open(struct net_device *dev); static int mace_close(struct net_device *dev); -static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev); +static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev); static void mace_set_multicast(struct net_device *dev); static int mace_set_address(struct net_device *dev, void *addr); static void mace_reset(struct net_device *dev); @@ -444,7 +444,7 @@ static int mace_close(struct net_device *dev) * Transmit a frame */ -static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t mace_xmit_start(struct sk_buff *skb, struct net_device *dev) { struct mace_data *mp = netdev_priv(dev); unsigned long flags; -- cgit v1.2.3-59-g8ed1b From 83fe9a966111b51a34f10c35e568e45bff34de48 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 21 Sep 2018 11:07:55 +0300 Subject: devlink: double free in devlink_resource_fill() Smatch reports that devlink_dpipe_send_and_alloc_skb() frees the skb on error so this is a double free. We fixed a bunch of these bugs in commit 7fe4d6dcbcb4 ("devlink: Remove redundant free on error path") but we accidentally overlooked this one. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- net/core/devlink.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/devlink.c b/net/core/devlink.c index 65fc366a78a4..8c0ed225e280 100644 --- a/net/core/devlink.c +++ b/net/core/devlink.c @@ -2592,7 +2592,7 @@ send_done: if (!nlh) { err = devlink_dpipe_send_and_alloc_skb(&skb, info); if (err) - goto err_skb_send_alloc; + return err; goto send_done; } return genlmsg_reply(skb, info); @@ -2600,7 +2600,6 @@ send_done: nla_put_failure: err = -EMSGSIZE; err_resource_put: -err_skb_send_alloc: nlmsg_free(skb); return err; } -- cgit v1.2.3-59-g8ed1b From 8ac1ee6f4d62e781e3b3fd8b9c42b70371427669 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 21 Sep 2018 02:44:12 -0700 Subject: net/mlx4: Use cpumask_available for eq->affinity_mask Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86 Signed-off-by: Nathan Chancellor Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 1f3372c1802e..2df92dbd38e1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -240,7 +240,8 @@ static void mlx4_set_eq_affinity_hint(struct mlx4_priv *priv, int vec) struct mlx4_dev *dev = &priv->dev; struct mlx4_eq *eq = &priv->eq_table.eq[vec]; - if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) + if (!cpumask_available(eq->affinity_mask) || + cpumask_empty(eq->affinity_mask)) return; hint_err = irq_set_affinity_hint(eq->irq, eq->affinity_mask); -- cgit v1.2.3-59-g8ed1b From b57e99b4b8b0ebdf9707424e7ddc0c392bdc5fe6 Mon Sep 17 00:00:00 2001 From: Omar Sandoval Date: Fri, 21 Sep 2018 16:44:34 -0700 Subject: block: use nanosecond resolution for iostat Klaus Kusche reported that the I/O busy time in /proc/diskstats was not updating properly on 4.18. This is because we started using ktime to track elapsed time, and we convert nanoseconds to jiffies when we update the partition counter. However, this gets rounded down, so any I/Os that take less than a jiffy are not accounted for. Previously in this case, the value of jiffies would sometimes increment while we were doing I/O, so at least some I/Os were accounted for. Let's convert the stats to use nanoseconds internally. We still report milliseconds as before, now more accurately than ever. The value is still truncated to 32 bits for backwards compatibility. Fixes: 522a777566f5 ("block: consolidate struct request timestamp fields") Cc: stable@vger.kernel.org Reported-by: Klaus Kusche Signed-off-by: Omar Sandoval Signed-off-by: Jens Axboe --- block/bio.c | 2 +- block/blk-core.c | 4 +--- block/genhd.c | 6 +++--- block/partition-generic.c | 6 +++--- include/linux/genhd.h | 5 ++++- 5 files changed, 12 insertions(+), 11 deletions(-) diff --git a/block/bio.c b/block/bio.c index 8c680a776171..0093bed81c0e 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1684,7 +1684,7 @@ void generic_end_io_acct(struct request_queue *q, int req_op, const int sgrp = op_stat_group(req_op); int cpu = part_stat_lock(); - part_stat_add(cpu, part, ticks[sgrp], duration); + part_stat_add(cpu, part, nsecs[sgrp], jiffies_to_nsecs(duration)); part_round_stats(q, cpu, part); part_dec_in_flight(q, part, op_is_write(req_op)); diff --git a/block/blk-core.c b/block/blk-core.c index 4dbc93f43b38..cff0a60ee200 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2733,17 +2733,15 @@ void blk_account_io_done(struct request *req, u64 now) * containing request is enough. */ if (blk_do_io_stat(req) && !(req->rq_flags & RQF_FLUSH_SEQ)) { - unsigned long duration; const int sgrp = op_stat_group(req_op(req)); struct hd_struct *part; int cpu; - duration = nsecs_to_jiffies(now - req->start_time_ns); cpu = part_stat_lock(); part = req->part; part_stat_inc(cpu, part, ios[sgrp]); - part_stat_add(cpu, part, ticks[sgrp], duration); + part_stat_add(cpu, part, nsecs[sgrp], now - req->start_time_ns); part_round_stats(req->q, cpu, part); part_dec_in_flight(req->q, part, rq_data_dir(req)); diff --git a/block/genhd.c b/block/genhd.c index 8cc719a37b32..be5bab20b2ab 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1343,18 +1343,18 @@ static int diskstats_show(struct seq_file *seqf, void *v) part_stat_read(hd, ios[STAT_READ]), part_stat_read(hd, merges[STAT_READ]), part_stat_read(hd, sectors[STAT_READ]), - jiffies_to_msecs(part_stat_read(hd, ticks[STAT_READ])), + (unsigned int)part_stat_read_msecs(hd, STAT_READ), part_stat_read(hd, ios[STAT_WRITE]), part_stat_read(hd, merges[STAT_WRITE]), part_stat_read(hd, sectors[STAT_WRITE]), - jiffies_to_msecs(part_stat_read(hd, ticks[STAT_WRITE])), + (unsigned int)part_stat_read_msecs(hd, STAT_WRITE), inflight[0], jiffies_to_msecs(part_stat_read(hd, io_ticks)), jiffies_to_msecs(part_stat_read(hd, time_in_queue)), part_stat_read(hd, ios[STAT_DISCARD]), part_stat_read(hd, merges[STAT_DISCARD]), part_stat_read(hd, sectors[STAT_DISCARD]), - jiffies_to_msecs(part_stat_read(hd, ticks[STAT_DISCARD])) + (unsigned int)part_stat_read_msecs(hd, STAT_DISCARD) ); } disk_part_iter_exit(&piter); diff --git a/block/partition-generic.c b/block/partition-generic.c index 5a8975a1201c..d3d14e81fb12 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -136,18 +136,18 @@ ssize_t part_stat_show(struct device *dev, part_stat_read(p, ios[STAT_READ]), part_stat_read(p, merges[STAT_READ]), (unsigned long long)part_stat_read(p, sectors[STAT_READ]), - jiffies_to_msecs(part_stat_read(p, ticks[STAT_READ])), + (unsigned int)part_stat_read_msecs(p, STAT_READ), part_stat_read(p, ios[STAT_WRITE]), part_stat_read(p, merges[STAT_WRITE]), (unsigned long long)part_stat_read(p, sectors[STAT_WRITE]), - jiffies_to_msecs(part_stat_read(p, ticks[STAT_WRITE])), + (unsigned int)part_stat_read_msecs(p, STAT_WRITE), inflight[0], jiffies_to_msecs(part_stat_read(p, io_ticks)), jiffies_to_msecs(part_stat_read(p, time_in_queue)), part_stat_read(p, ios[STAT_DISCARD]), part_stat_read(p, merges[STAT_DISCARD]), (unsigned long long)part_stat_read(p, sectors[STAT_DISCARD]), - jiffies_to_msecs(part_stat_read(p, ticks[STAT_DISCARD]))); + (unsigned int)part_stat_read_msecs(p, STAT_DISCARD)); } ssize_t part_inflight_show(struct device *dev, struct device_attribute *attr, diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 57864422a2c8..25c08c6c7f99 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -83,10 +83,10 @@ struct partition { } __attribute__((packed)); struct disk_stats { + u64 nsecs[NR_STAT_GROUPS]; unsigned long sectors[NR_STAT_GROUPS]; unsigned long ios[NR_STAT_GROUPS]; unsigned long merges[NR_STAT_GROUPS]; - unsigned long ticks[NR_STAT_GROUPS]; unsigned long io_ticks; unsigned long time_in_queue; }; @@ -354,6 +354,9 @@ static inline void free_part_stats(struct hd_struct *part) #endif /* CONFIG_SMP */ +#define part_stat_read_msecs(part, which) \ + div_u64(part_stat_read(part, nsecs[which]), NSEC_PER_MSEC) + #define part_stat_read_accum(part, field) \ (part_stat_read(part, field[STAT_READ]) + \ part_stat_read(part, field[STAT_WRITE]) + \ -- cgit v1.2.3-59-g8ed1b From 8360ed6745df6de2d8ddff8e2116789258fe5890 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Fri, 21 Sep 2018 11:04:51 -0700 Subject: RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats Clang warns when two declarations' section attributes don't match. net/rds/ib_stats.c:40:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:142:2: note: expanded from macro 'DEFINE_PER_CPU_SHARED_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ ^ ./include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ net/rds/ib.h:446:1: note: previous attribute is here DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ./include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ 1 warning generated. The initial definition was added in commit ec16227e1414 ("RDS/IB: Infiniband transport") and the cache aligned definition was added in commit e6babe4cc4ce ("RDS/IB: Stats and sysctls") right after. The definition probably should have been updated in net/rds/ib.h, which is what this patch does. Link: https://github.com/ClangBuiltLinux/linux/issues/114 Signed-off-by: Nathan Chancellor Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- net/rds/ib.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rds/ib.h b/net/rds/ib.h index 73427ff439f9..fd483760c910 100644 --- a/net/rds/ib.h +++ b/net/rds/ib.h @@ -443,7 +443,7 @@ int rds_ib_send_grab_credits(struct rds_ib_connection *ic, u32 wanted, int rds_ib_xmit_atomic(struct rds_connection *conn, struct rm_atomic_op *op); /* ib_stats.c */ -DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats); +DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); #define rds_ib_stats_inc(member) rds_stats_inc_which(rds_ib_stats, member) #define rds_ib_stats_add(member, count) \ rds_stats_add_which(rds_ib_stats, member, count) -- cgit v1.2.3-59-g8ed1b From 41c9b1be335b5afc3b5fb71c5d16f9d5939cd13f Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Mon, 10 Sep 2018 16:18:29 -0700 Subject: device-dax: Add missing address_space_operations With address_space_operations missing for device dax, namely the .set_page_dirty, we hit a kernel warning when running destructive ndctl unit test: make TESTS=device-dax check WARNING: CPU: 3 PID: 7380 at fs/buffer.c:581 __set_page_dirty+0xb1/0xc0 Setting address_space_operations to noop_set_page_dirty and noop_invalidatepage for device dax to prevent fallback to __set_page_dirty_buffers() and block_invalidatepage() respectively. Fixes: 2232c6382a ("device-dax: Enable page_mapping()") Acked-by: Jeff Moyer Reported-by: Vishal Verma Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/dax/device.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/dax/device.c b/drivers/dax/device.c index bbe4d72ca105..948806e57cee 100644 --- a/drivers/dax/device.c +++ b/drivers/dax/device.c @@ -535,6 +535,11 @@ static unsigned long dax_get_unmapped_area(struct file *filp, return current->mm->get_unmapped_area(filp, addr, len, pgoff, flags); } +static const struct address_space_operations dev_dax_aops = { + .set_page_dirty = noop_set_page_dirty, + .invalidatepage = noop_invalidatepage, +}; + static int dax_open(struct inode *inode, struct file *filp) { struct dax_device *dax_dev = inode_dax(inode); @@ -544,6 +549,7 @@ static int dax_open(struct inode *inode, struct file *filp) dev_dbg(&dev_dax->dev, "trace\n"); inode->i_mapping = __dax_inode->i_mapping; inode->i_mapping->host = __dax_inode; + inode->i_mapping->a_ops = &dev_dax_aops; filp->f_mapping = inode->i_mapping; filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping); filp->private_data = dev_dax; -- cgit v1.2.3-59-g8ed1b From 474ff2600889e16280dbc6ada8bfecb216169a70 Mon Sep 17 00:00:00 2001 From: Maciej Żenczykowski Date: Sat, 22 Sep 2018 01:34:01 -0700 Subject: net-ethtool: ETHTOOL_GUFO did not and should not require CAP_NET_ADMIN MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit So it should not fail with EPERM even though it is no longer implemented... This is a fix for: (userns)$ egrep ^Cap /proc/self/status CapInh: 0000003fffffffff CapPrm: 0000003fffffffff CapEff: 0000003fffffffff CapBnd: 0000003fffffffff CapAmb: 0000003fffffffff (userns)$ tcpdump -i usb_rndis0 tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted Warning: Kernel filter failed: Bad file descriptor tcpdump: can't remove kernel filter: Bad file descriptor With this change it returns EOPNOTSUPP instead of EPERM. See also https://github.com/the-tcpdump-group/libpcap/issues/689 Fixes: 08a00fea6de2 "net: Remove references to NETIF_F_UFO from ethtool." Cc: David S. Miller Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/core/ethtool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index c9993c6c2fd4..234a0ec2e932 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -2624,6 +2624,7 @@ int dev_ethtool(struct net *net, struct ifreq *ifr) case ETHTOOL_GPHYSTATS: case ETHTOOL_GTSO: case ETHTOOL_GPERMADDR: + case ETHTOOL_GUFO: case ETHTOOL_GGSO: case ETHTOOL_GGRO: case ETHTOOL_GFLAGS: -- cgit v1.2.3-59-g8ed1b From 6bf4ca7fbc85d80446ac01c0d1d77db4d91a6d84 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 23 Sep 2018 19:15:18 +0200 Subject: Linux 4.19-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f03a1e062503..0c90c4354979 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 19 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3-59-g8ed1b From 16fdf8ba98391650ce4bc4f3f71629d8a413bc21 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 23 Sep 2018 12:25:15 -0700 Subject: rds: Fix build regression. Use DECLARE_* not DEFINE_* Fixes: 8360ed6745df ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats") Signed-off-by: David S. Miller --- net/rds/ib.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rds/ib.h b/net/rds/ib.h index fd483760c910..71ff356ee702 100644 --- a/net/rds/ib.h +++ b/net/rds/ib.h @@ -443,7 +443,7 @@ int rds_ib_send_grab_credits(struct rds_ib_connection *ic, u32 wanted, int rds_ib_xmit_atomic(struct rds_connection *conn, struct rm_atomic_op *op); /* ib_stats.c */ -DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); +DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); #define rds_ib_stats_inc(member) rds_stats_inc_which(rds_ib_stats, member) #define rds_ib_stats_add(member, count) \ rds_stats_add_which(rds_ib_stats, member, count) -- cgit v1.2.3-59-g8ed1b From 4451d3f59f2a6f95e5d205c2d04ea072955d080d Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Wed, 19 Sep 2018 15:13:31 -0700 Subject: clocksource/drivers/fttmr010: Fix set_next_event handler Currently, the aspeed MATCH1 register is updated to in set_next_event handler, with the assumption that COUNT register value is preserved when the timer is disabled and it continues decrementing after the timer is enabled. But the assumption is wrong: RELOAD register is loaded into COUNT register when the aspeed timer is enabled, which means the next event may be delayed because timer interrupt won't be generated until <0xFFFFFFFF - current_count + cycles>. The problem can be fixed by updating RELOAD register to , and COUNT register will be re-loaded when the timer is enabled and interrupt is generated when COUNT register overflows. The test result on Facebook Backpack-CMM BMC hardware (AST2500) shows the issue is fixed: without the patch, usleep(100) suspends the process for several milliseconds (and sometimes even over 40 milliseconds); after applying the fix, usleep(100) takes averagely 240 microseconds to return under the same workload level. Signed-off-by: Tao Ren Reviewed-by: Linus Walleij Tested-by: Lei YU Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-fttmr010.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c index c020038ebfab..cf93f6419b51 100644 --- a/drivers/clocksource/timer-fttmr010.c +++ b/drivers/clocksource/timer-fttmr010.c @@ -130,13 +130,17 @@ static int fttmr010_timer_set_next_event(unsigned long cycles, cr &= ~fttmr010->t1_enable_val; writel(cr, fttmr010->base + TIMER_CR); - /* Setup the match register forward/backward in time */ - cr = readl(fttmr010->base + TIMER1_COUNT); - if (fttmr010->count_down) - cr -= cycles; - else - cr += cycles; - writel(cr, fttmr010->base + TIMER1_MATCH1); + if (fttmr010->count_down) { + /* + * ASPEED Timer Controller will load TIMER1_LOAD register + * into TIMER1_COUNT register when the timer is re-enabled. + */ + writel(cycles, fttmr010->base + TIMER1_LOAD); + } else { + /* Setup the match register forward in time */ + cr = readl(fttmr010->base + TIMER1_COUNT); + writel(cr + cycles, fttmr010->base + TIMER1_MATCH1); + } /* Start */ cr = readl(fttmr010->base + TIMER_CR); -- cgit v1.2.3-59-g8ed1b From ac3d9dd034e565df2c034ab2ca71f0a9f69153c1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:38 -0700 Subject: netpoll: make ndo_poll_controller() optional As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller(). NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. This patch allows netpoll_poll_dev() to process NAPI contexts even for drivers not providing ndo_poll_controller(), allowing for following patches in NAPI drivers. Also we export netpoll_poll_dev() so that it can be called by bonding/team drivers in following patches. Reported-by: Song Liu Signed-off-by: Eric Dumazet Tested-by: Song Liu Signed-off-by: David S. Miller --- include/linux/netpoll.h | 5 +++-- net/core/netpoll.c | 19 +++++++------------ 2 files changed, 10 insertions(+), 14 deletions(-) diff --git a/include/linux/netpoll.h b/include/linux/netpoll.h index 67662d01130a..3ef82d3a78db 100644 --- a/include/linux/netpoll.h +++ b/include/linux/netpoll.h @@ -49,8 +49,9 @@ struct netpoll_info { }; #ifdef CONFIG_NETPOLL -extern void netpoll_poll_disable(struct net_device *dev); -extern void netpoll_poll_enable(struct net_device *dev); +void netpoll_poll_dev(struct net_device *dev); +void netpoll_poll_disable(struct net_device *dev); +void netpoll_poll_enable(struct net_device *dev); #else static inline void netpoll_poll_disable(struct net_device *dev) { return; } static inline void netpoll_poll_enable(struct net_device *dev) { return; } diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 57557a6a950c..3219a2932463 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -187,16 +187,16 @@ static void poll_napi(struct net_device *dev) } } -static void netpoll_poll_dev(struct net_device *dev) +void netpoll_poll_dev(struct net_device *dev) { - const struct net_device_ops *ops; struct netpoll_info *ni = rcu_dereference_bh(dev->npinfo); + const struct net_device_ops *ops; /* Don't do any rx activity if the dev_lock mutex is held * the dev_open/close paths use this to block netpoll activity * while changing device state */ - if (down_trylock(&ni->dev_lock)) + if (!ni || down_trylock(&ni->dev_lock)) return; if (!netif_running(dev)) { @@ -205,13 +205,8 @@ static void netpoll_poll_dev(struct net_device *dev) } ops = dev->netdev_ops; - if (!ops->ndo_poll_controller) { - up(&ni->dev_lock); - return; - } - - /* Process pending work on NIC */ - ops->ndo_poll_controller(dev); + if (ops->ndo_poll_controller) + ops->ndo_poll_controller(dev); poll_napi(dev); @@ -219,6 +214,7 @@ static void netpoll_poll_dev(struct net_device *dev) zap_completion_queue(); } +EXPORT_SYMBOL(netpoll_poll_dev); void netpoll_poll_disable(struct net_device *dev) { @@ -613,8 +609,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev) strlcpy(np->dev_name, ndev->name, IFNAMSIZ); INIT_WORK(&np->cleanup_work, netpoll_async_cleanup); - if ((ndev->priv_flags & IFF_DISABLE_NETPOLL) || - !ndev->netdev_ops->ndo_poll_controller) { + if (ndev->priv_flags & IFF_DISABLE_NETPOLL) { np_err(np, "%s doesn't support polling, aborting\n", np->dev_name); err = -ENOTSUPP; -- cgit v1.2.3-59-g8ed1b From 93f62ad5e83a13e0c224dfca5ef40f90c09aad51 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:39 -0700 Subject: bonding: use netpoll_poll_dev() helper We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by: Eric Dumazet Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Acked-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a764a83f99da..0d87e11e7f1d 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -971,16 +971,13 @@ static void bond_poll_controller(struct net_device *bond_dev) struct slave *slave = NULL; struct list_head *iter; struct ad_info ad_info; - struct netpoll_info *ni; - const struct net_device_ops *ops; if (BOND_MODE(bond) == BOND_MODE_8023AD) if (bond_3ad_get_active_agg_info(bond, &ad_info)) return; bond_for_each_slave_rcu(bond, slave, iter) { - ops = slave->dev->netdev_ops; - if (!bond_slave_is_up(slave) || !ops->ndo_poll_controller) + if (!bond_slave_is_up(slave)) continue; if (BOND_MODE(bond) == BOND_MODE_8023AD) { @@ -992,11 +989,7 @@ static void bond_poll_controller(struct net_device *bond_dev) continue; } - ni = rcu_dereference_bh(slave->dev->npinfo); - if (down_trylock(&ni->dev_lock)) - continue; - ops->ndo_poll_controller(slave->dev); - up(&ni->dev_lock); + netpoll_poll_dev(slave->dev); } } -- cgit v1.2.3-59-g8ed1b From b80e71a986c2ab5677dc6b84923cd7030b690800 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:40 -0700 Subject: ixgbe: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: Song Liu Signed-off-by: Eric Dumazet Tested-by: Song Liu Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9a23d33a47ed..f27d73a7bf16 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -8768,28 +8768,6 @@ static int ixgbe_del_sanmac_netdev(struct net_device *dev) return err; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void ixgbe_netpoll(struct net_device *netdev) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - int i; - - /* if interface is down do nothing */ - if (test_bit(__IXGBE_DOWN, &adapter->state)) - return; - - /* loop through and schedule all active queues */ - for (i = 0; i < adapter->num_q_vectors; i++) - ixgbe_msix_clean_rings(0, adapter->q_vector[i]); -} - -#endif - static void ixgbe_get_ring_stats64(struct rtnl_link_stats64 *stats, struct ixgbe_ring *ring) { @@ -10251,9 +10229,6 @@ static const struct net_device_ops ixgbe_netdev_ops = { .ndo_get_vf_config = ixgbe_ndo_get_vf_config, .ndo_get_stats64 = ixgbe_get_stats64, .ndo_setup_tc = __ixgbe_setup_tc, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ixgbe_netpoll, -#endif #ifdef IXGBE_FCOE .ndo_select_queue = ixgbe_select_queue, .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get, -- cgit v1.2.3-59-g8ed1b From 6f5d941ebadeb1150530f205af0eb5cf5bfeb219 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:41 -0700 Subject: ixgbevf: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbevf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index d86446d202d5..5a228582423b 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -4233,24 +4233,6 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu) return 0; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void ixgbevf_netpoll(struct net_device *netdev) -{ - struct ixgbevf_adapter *adapter = netdev_priv(netdev); - int i; - - /* if interface is down do nothing */ - if (test_bit(__IXGBEVF_DOWN, &adapter->state)) - return; - for (i = 0; i < adapter->num_rx_queues; i++) - ixgbevf_msix_clean_rings(0, adapter->q_vector[i]); -} -#endif /* CONFIG_NET_POLL_CONTROLLER */ - static int ixgbevf_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -4482,9 +4464,6 @@ static const struct net_device_ops ixgbevf_netdev_ops = { .ndo_tx_timeout = ixgbevf_tx_timeout, .ndo_vlan_rx_add_vid = ixgbevf_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = ixgbevf_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ixgbevf_netpoll, -#endif .ndo_features_check = ixgbevf_features_check, .ndo_bpf = ixgbevf_xdp, }; -- cgit v1.2.3-59-g8ed1b From dda9d57e2d4245c0d8e309ee7399bf2ebfca64ae Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:42 -0700 Subject: fm10k: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture lasts for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. fm10k uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/fm10k/fm10k.h | 3 --- drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 3 --- drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 22 ---------------------- 3 files changed, 28 deletions(-) diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index a903a0ba45e1..7d42582ed48d 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -504,9 +504,6 @@ void fm10k_update_stats(struct fm10k_intfc *interface); void fm10k_service_event_schedule(struct fm10k_intfc *interface); void fm10k_macvlan_schedule(struct fm10k_intfc *interface); void fm10k_update_rx_drop_en(struct fm10k_intfc *interface); -#ifdef CONFIG_NET_POLL_CONTROLLER -void fm10k_netpoll(struct net_device *netdev); -#endif /* Netdev */ struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c index 929f538d28bc..538a8467f434 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c @@ -1648,9 +1648,6 @@ static const struct net_device_ops fm10k_netdev_ops = { .ndo_udp_tunnel_del = fm10k_udp_tunnel_del, .ndo_dfwd_add_station = fm10k_dfwd_add_station, .ndo_dfwd_del_station = fm10k_dfwd_del_station, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = fm10k_netpoll, -#endif .ndo_features_check = fm10k_features_check, }; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 15071e4adb98..c859ababeed5 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -1210,28 +1210,6 @@ static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data) return IRQ_HANDLED; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/** - * fm10k_netpoll - A Polling 'interrupt' handler - * @netdev: network interface device structure - * - * This is used by netconsole to send skbs without having to re-enable - * interrupts. It's not called while the normal interrupt routine is executing. - **/ -void fm10k_netpoll(struct net_device *netdev) -{ - struct fm10k_intfc *interface = netdev_priv(netdev); - int i; - - /* if interface is down do nothing */ - if (test_bit(__FM10K_DOWN, interface->state)) - return; - - for (i = 0; i < interface->num_q_vectors; i++) - fm10k_msix_clean_rings(0, interface->q_vector[i]); -} - -#endif #define FM10K_ERR_MSG(type) case (type): error = #type; break static void fm10k_handle_fault(struct fm10k_intfc *interface, int type, struct fm10k_fault *fault) -- cgit v1.2.3-59-g8ed1b From 2753166e4be9df4677745a7f7d9d8daa94938a08 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:43 -0700 Subject: ixgb: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. This also removes a problematic use of disable_irq() in a context it is forbidden, as explained in commit af3e0fcf7887 ("8139too: Use disable_irq_nosync() in rtl8139_poll_controller()") Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index d3e72d0f66ef..7722153c4ac2 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -81,11 +81,6 @@ static int ixgb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid); static void ixgb_restore_vlan(struct ixgb_adapter *adapter); -#ifdef CONFIG_NET_POLL_CONTROLLER -/* for netdump / net console */ -static void ixgb_netpoll(struct net_device *dev); -#endif - static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, enum pci_channel_state state); static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev); @@ -348,9 +343,6 @@ static const struct net_device_ops ixgb_netdev_ops = { .ndo_tx_timeout = ixgb_tx_timeout, .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ixgb_netpoll, -#endif .ndo_fix_features = ixgb_fix_features, .ndo_set_features = ixgb_set_features, }; @@ -2195,23 +2187,6 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) ixgb_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ - -static void ixgb_netpoll(struct net_device *dev) -{ - struct ixgb_adapter *adapter = netdev_priv(dev); - - disable_irq(adapter->pdev->irq); - ixgb_intr(adapter->pdev->irq, dev); - enable_irq(adapter->pdev->irq); -} -#endif - /** * ixgb_io_error_detected - called when PCI error is detected * @pdev: pointer to pci device with error -- cgit v1.2.3-59-g8ed1b From 0542997edece2d75e0bf3e173dfddf1b2b3ef756 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:44 -0700 Subject: igb: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. igb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_main.c | 30 ------------------------------ 1 file changed, 30 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index a32c576c1e65..0796cef96fa3 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -205,10 +205,6 @@ static struct notifier_block dca_notifier = { .priority = 0 }; #endif -#ifdef CONFIG_NET_POLL_CONTROLLER -/* for netdump / net console */ -static void igb_netpoll(struct net_device *); -#endif #ifdef CONFIG_PCI_IOV static unsigned int max_vfs; module_param(max_vfs, uint, 0); @@ -2881,9 +2877,6 @@ static const struct net_device_ops igb_netdev_ops = { .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, .ndo_set_vf_trust = igb_ndo_set_vf_trust, .ndo_get_vf_config = igb_ndo_get_vf_config, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = igb_netpoll, -#endif .ndo_fix_features = igb_fix_features, .ndo_set_features = igb_set_features, .ndo_fdb_add = igb_ndo_fdb_add, @@ -9053,29 +9046,6 @@ static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs) return 0; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void igb_netpoll(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct igb_q_vector *q_vector; - int i; - - for (i = 0; i < adapter->num_q_vectors; i++) { - q_vector = adapter->q_vector[i]; - if (adapter->flags & IGB_FLAG_HAS_MSIX) - wr32(E1000_EIMC, q_vector->eims_value); - else - igb_irq_disable(adapter); - napi_schedule(&q_vector->napi); - } -} -#endif /* CONFIG_NET_POLL_CONTROLLER */ - /** * igb_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device -- cgit v1.2.3-59-g8ed1b From 158a08a694c4ecf9574fe452db24a6b4943853aa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:45 -0700 Subject: ice: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ice uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ice/ice_main.c | 27 --------------------------- 1 file changed, 27 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index f1e80eed2fd6..3f047bb43348 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4806,30 +4806,6 @@ void ice_get_stats64(struct net_device *netdev, struct rtnl_link_stats64 *stats) stats->rx_length_errors = vsi_stats->rx_length_errors; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/** - * ice_netpoll - polling "interrupt" handler - * @netdev: network interface device structure - * - * Used by netconsole to send skbs without having to re-enable interrupts. - * This is not called in the normal interrupt path. - */ -static void ice_netpoll(struct net_device *netdev) -{ - struct ice_netdev_priv *np = netdev_priv(netdev); - struct ice_vsi *vsi = np->vsi; - struct ice_pf *pf = vsi->back; - int i; - - if (test_bit(__ICE_DOWN, vsi->state) || - !test_bit(ICE_FLAG_MSIX_ENA, pf->flags)) - return; - - for (i = 0; i < vsi->num_q_vectors; i++) - ice_msix_clean_rings(0, vsi->q_vectors[i]); -} -#endif /* CONFIG_NET_POLL_CONTROLLER */ - /** * ice_napi_disable_all - Disable NAPI for all q_vectors in the VSI * @vsi: VSI having NAPI disabled @@ -5497,9 +5473,6 @@ static const struct net_device_ops ice_netdev_ops = { .ndo_validate_addr = eth_validate_addr, .ndo_change_mtu = ice_change_mtu, .ndo_get_stats64 = ice_get_stats64, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ice_netpoll, -#endif /* CONFIG_NET_POLL_CONTROLLER */ .ndo_vlan_rx_add_vid = ice_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = ice_vlan_rx_kill_vid, .ndo_set_features = ice_set_features, -- cgit v1.2.3-59-g8ed1b From 1aa28fb98368078bcaf527bf46c0e001db934414 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:46 -0700 Subject: i40evf: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. i40evf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40evf/i40evf_main.c | 26 ------------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c index 5906c1c1d19d..fef6d892ed4c 100644 --- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c +++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c @@ -396,29 +396,6 @@ static void i40evf_map_rings_to_vectors(struct i40evf_adapter *adapter) adapter->aq_required |= I40EVF_FLAG_AQ_MAP_VECTORS; } -#ifdef CONFIG_NET_POLL_CONTROLLER -/** - * i40evf_netpoll - A Polling 'interrupt' handler - * @netdev: network interface device structure - * - * This is used by netconsole to send skbs without having to re-enable - * interrupts. It's not called while the normal interrupt routine is executing. - **/ -static void i40evf_netpoll(struct net_device *netdev) -{ - struct i40evf_adapter *adapter = netdev_priv(netdev); - int q_vectors = adapter->num_msix_vectors - NONQ_VECS; - int i; - - /* if interface is down do nothing */ - if (test_bit(__I40E_VSI_DOWN, adapter->vsi.state)) - return; - - for (i = 0; i < q_vectors; i++) - i40evf_msix_clean_rings(0, &adapter->q_vectors[i]); -} - -#endif /** * i40evf_irq_affinity_notify - Callback for affinity changes * @notify: context as to what irq was changed @@ -3229,9 +3206,6 @@ static const struct net_device_ops i40evf_netdev_ops = { .ndo_features_check = i40evf_features_check, .ndo_fix_features = i40evf_fix_features, .ndo_set_features = i40evf_set_features, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = i40evf_netpoll, -#endif .ndo_setup_tc = i40evf_setup_tc, }; -- cgit v1.2.3-59-g8ed1b From a24b66c249f71dde11da5ba3b4c397a42ece3fc9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:47 -0700 Subject: mlx4: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx4 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 6785661d1a72..fe49384eba48 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1286,20 +1286,6 @@ out: mutex_unlock(&mdev->state_lock); } -#ifdef CONFIG_NET_POLL_CONTROLLER -static void mlx4_en_netpoll(struct net_device *dev) -{ - struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_cq *cq; - int i; - - for (i = 0; i < priv->tx_ring_num[TX]; i++) { - cq = priv->tx_cq[TX][i]; - napi_schedule(&cq->napi); - } -} -#endif - static int mlx4_en_set_rss_steer_rules(struct mlx4_en_priv *priv) { u64 reg_id; @@ -2946,9 +2932,6 @@ static const struct net_device_ops mlx4_netdev_ops = { .ndo_tx_timeout = mlx4_en_tx_timeout, .ndo_vlan_rx_add_vid = mlx4_en_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = mlx4_en_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = mlx4_en_netpoll, -#endif .ndo_set_features = mlx4_en_set_features, .ndo_fix_features = mlx4_en_fix_features, .ndo_setup_tc = __mlx4_en_setup_tc, @@ -2983,9 +2966,6 @@ static const struct net_device_ops mlx4_netdev_ops_master = { .ndo_set_vf_link_state = mlx4_en_set_vf_link_state, .ndo_get_vf_stats = mlx4_en_get_vf_stats, .ndo_get_vf_config = mlx4_en_get_vf_config, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = mlx4_en_netpoll, -#endif .ndo_set_features = mlx4_en_set_features, .ndo_fix_features = mlx4_en_fix_features, .ndo_setup_tc = __mlx4_en_setup_tc, -- cgit v1.2.3-59-g8ed1b From 9c29bcd189f4ab1644b7125713602532d0aefdb7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:48 -0700 Subject: mlx5: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx5 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 5a7939e70190..54118b77dc1f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4315,22 +4315,6 @@ static int mlx5e_xdp(struct net_device *dev, struct netdev_bpf *xdp) } } -#ifdef CONFIG_NET_POLL_CONTROLLER -/* Fake "interrupt" called by netpoll (eg netconsole) to send skbs without - * reenabling interrupts. - */ -static void mlx5e_netpoll(struct net_device *dev) -{ - struct mlx5e_priv *priv = netdev_priv(dev); - struct mlx5e_channels *chs = &priv->channels; - - int i; - - for (i = 0; i < chs->num; i++) - napi_schedule(&chs->c[i]->napi); -} -#endif - static const struct net_device_ops mlx5e_netdev_ops = { .ndo_open = mlx5e_open, .ndo_stop = mlx5e_close, @@ -4356,9 +4340,6 @@ static const struct net_device_ops mlx5e_netdev_ops = { #ifdef CONFIG_MLX5_EN_ARFS .ndo_rx_flow_steer = mlx5e_rx_flow_steer, #endif -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = mlx5e_netpoll, -#endif #ifdef CONFIG_MLX5_ESWITCH /* SRIOV E-Switch NDOs */ .ndo_set_vf_mac = mlx5e_set_vf_mac, -- cgit v1.2.3-59-g8ed1b From d8ea6a91ad70ae0881d76446df27d3f58fd478c3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:49 -0700 Subject: bnx2x: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnx2x uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 71362b7f6040..fcc2328bb0d9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12894,19 +12894,6 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } } -#ifdef CONFIG_NET_POLL_CONTROLLER -static void poll_bnx2x(struct net_device *dev) -{ - struct bnx2x *bp = netdev_priv(dev); - int i; - - for_each_eth_queue(bp, i) { - struct bnx2x_fastpath *fp = &bp->fp[i]; - napi_schedule(&bnx2x_fp(bp, fp->index, napi)); - } -} -#endif - static int bnx2x_validate_addr(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -13113,9 +13100,6 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_tx_timeout = bnx2x_tx_timeout, .ndo_vlan_rx_add_vid = bnx2x_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = bnx2x_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = poll_bnx2x, -#endif .ndo_setup_tc = __bnx2x_setup_tc, #ifdef CONFIG_BNX2X_SRIOV .ndo_set_vf_mac = bnx2x_set_vf_mac, -- cgit v1.2.3-59-g8ed1b From 58e0e22bff638055278ea73e34d0d07a95260790 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:50 -0700 Subject: bnxt: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnxt uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 177587f9c3f1..61957b0bbd8c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -7672,21 +7672,6 @@ static void bnxt_tx_timeout(struct net_device *dev) bnxt_queue_sp_work(bp); } -#ifdef CONFIG_NET_POLL_CONTROLLER -static void bnxt_poll_controller(struct net_device *dev) -{ - struct bnxt *bp = netdev_priv(dev); - int i; - - /* Only process tx rings/combined rings in netpoll mode. */ - for (i = 0; i < bp->tx_nr_rings; i++) { - struct bnxt_tx_ring_info *txr = &bp->tx_ring[i]; - - napi_schedule(&txr->bnapi->napi); - } -} -#endif - static void bnxt_timer(struct timer_list *t) { struct bnxt *bp = from_timer(bp, t, timer); @@ -8519,9 +8504,6 @@ static const struct net_device_ops bnxt_netdev_ops = { .ndo_set_vf_link_state = bnxt_set_vf_link_state, .ndo_set_vf_spoofchk = bnxt_set_vf_spoofchk, .ndo_set_vf_trust = bnxt_set_vf_trust, -#endif -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = bnxt_poll_controller, #endif .ndo_setup_tc = bnxt_setup_tc, #ifdef CONFIG_RFS_ACCEL -- cgit v1.2.3-59-g8ed1b From 0825ce70318e9c576acbdd5ceb4a8d563263cf8f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:51 -0700 Subject: nfp: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. nfp uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Cc: Jakub Kicinski Acked-by: Jakub Kicinski Tested-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 253bdaef1505..8ed38fd5a852 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -3146,21 +3146,6 @@ nfp_net_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) return nfp_net_reconfig_mbox(nn, NFP_NET_CFG_MBOX_CMD_CTAG_FILTER_KILL); } -#ifdef CONFIG_NET_POLL_CONTROLLER -static void nfp_net_netpoll(struct net_device *netdev) -{ - struct nfp_net *nn = netdev_priv(netdev); - int i; - - /* nfp_net's NAPIs are statically allocated so even if there is a race - * with reconfig path this will simply try to schedule some disabled - * NAPI instances. - */ - for (i = 0; i < nn->dp.num_stack_tx_rings; i++) - napi_schedule_irqoff(&nn->r_vecs[i].napi); -} -#endif - static void nfp_net_stat64(struct net_device *netdev, struct rtnl_link_stats64 *stats) { @@ -3519,9 +3504,6 @@ const struct net_device_ops nfp_net_netdev_ops = { .ndo_get_stats64 = nfp_net_stat64, .ndo_vlan_rx_add_vid = nfp_net_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = nfp_net_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = nfp_net_netpoll, -#endif .ndo_set_vf_mac = nfp_app_set_vf_mac, .ndo_set_vf_vlan = nfp_app_set_vf_vlan, .ndo_set_vf_spoofchk = nfp_app_set_vf_spoofchk, -- cgit v1.2.3-59-g8ed1b From 765cdc209cb89fb81215310a066cd0a3018ffef7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 21 Sep 2018 15:27:52 -0700 Subject: tun: remove ndo_poll_controller As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. tun uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/tun.c | 43 ------------------------------------------- 1 file changed, 43 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index ebd07ad82431..e2648b5a3861 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1153,43 +1153,6 @@ static netdev_features_t tun_net_fix_features(struct net_device *dev, return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); } -#ifdef CONFIG_NET_POLL_CONTROLLER -static void tun_poll_controller(struct net_device *dev) -{ - /* - * Tun only receives frames when: - * 1) the char device endpoint gets data from user space - * 2) the tun socket gets a sendmsg call from user space - * If NAPI is not enabled, since both of those are synchronous - * operations, we are guaranteed never to have pending data when we poll - * for it so there is nothing to do here but return. - * We need this though so netpoll recognizes us as an interface that - * supports polling, which enables bridge devices in virt setups to - * still use netconsole - * If NAPI is enabled, however, we need to schedule polling for all - * queues unless we are using napi_gro_frags(), which we call in - * process context and not in NAPI context. - */ - struct tun_struct *tun = netdev_priv(dev); - - if (tun->flags & IFF_NAPI) { - struct tun_file *tfile; - int i; - - if (tun_napi_frags_enabled(tun)) - return; - - rcu_read_lock(); - for (i = 0; i < tun->numqueues; i++) { - tfile = rcu_dereference(tun->tfiles[i]); - if (tfile->napi_enabled) - napi_schedule(&tfile->napi); - } - rcu_read_unlock(); - } - return; -} -#endif static void tun_set_headroom(struct net_device *dev, int new_hr) { @@ -1283,9 +1246,6 @@ static const struct net_device_ops tun_netdev_ops = { .ndo_start_xmit = tun_net_xmit, .ndo_fix_features = tun_net_fix_features, .ndo_select_queue = tun_select_queue, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = tun_poll_controller, -#endif .ndo_set_rx_headroom = tun_set_headroom, .ndo_get_stats64 = tun_net_get_stats64, }; @@ -1365,9 +1325,6 @@ static const struct net_device_ops tap_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, .ndo_select_queue = tun_select_queue, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = tun_poll_controller, -#endif .ndo_features_check = passthru_features_check, .ndo_set_rx_headroom = tun_set_headroom, .ndo_get_stats64 = tun_net_get_stats64, -- cgit v1.2.3-59-g8ed1b From d26ed6b0e5e23190d43ab34bc69cbecdc464a2cf Mon Sep 17 00:00:00 2001 From: Friedemann Gerold Date: Sat, 15 Sep 2018 18:03:39 +0300 Subject: net: aquantia: memory corruption on jumbo frames This patch fixes skb_shared area, which will be corrupted upon reception of 4K jumbo packets. Originally build_skb usage purpose was to reuse page for skb to eliminate needs of extra fragments. But that logic does not take into account that skb_shared_info should be reserved at the end of skb data area. In case packet data consumes all the page (4K), skb_shinfo location overflows the page. As a consequence, __build_skb zeroed shinfo data above the allocated page, corrupting next page. The issue is rarely seen in real life because jumbo are normally larger than 4K and that causes another code path to trigger. But it 100% reproducible with simple scapy packet, like: sendp(IP(dst="192.168.100.3") / TCP(dport=443) \ / Raw(RandString(size=(4096-40))), iface="enp1s0") Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Friedemann Gerold Reported-by: Michael Rauch Signed-off-by: Friedemann Gerold Tested-by: Nikita Danilov Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 32 +++++++++++++----------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c index b5f1f62e8e25..d1e1a0ba8615 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c @@ -225,9 +225,10 @@ int aq_ring_rx_clean(struct aq_ring_s *self, } /* for single fragment packets use build_skb() */ - if (buff->is_eop) { + if (buff->is_eop && + buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) { skb = build_skb(page_address(buff->page), - buff->len + AQ_SKB_ALIGN); + AQ_CFG_RX_FRAME_MAX); if (unlikely(!skb)) { err = -ENOMEM; goto err_exit; @@ -247,18 +248,21 @@ int aq_ring_rx_clean(struct aq_ring_s *self, buff->len - ETH_HLEN, SKB_TRUESIZE(buff->len - ETH_HLEN)); - for (i = 1U, next_ = buff->next, - buff_ = &self->buff_ring[next_]; true; - next_ = buff_->next, - buff_ = &self->buff_ring[next_], ++i) { - skb_add_rx_frag(skb, i, buff_->page, 0, - buff_->len, - SKB_TRUESIZE(buff->len - - ETH_HLEN)); - buff_->is_cleaned = 1; - - if (buff_->is_eop) - break; + if (!buff->is_eop) { + for (i = 1U, next_ = buff->next, + buff_ = &self->buff_ring[next_]; + true; next_ = buff_->next, + buff_ = &self->buff_ring[next_], ++i) { + skb_add_rx_frag(skb, i, + buff_->page, 0, + buff_->len, + SKB_TRUESIZE(buff->len - + ETH_HLEN)); + buff_->is_cleaned = 1; + + if (buff_->is_eop) + break; + } } } -- cgit v1.2.3-59-g8ed1b From 8604895a34d92f5e186ceb931b0d1b384030ea3d Mon Sep 17 00:00:00 2001 From: Michael Bringmann Date: Thu, 20 Sep 2018 11:45:13 -0500 Subject: powerpc/pseries: Fix unitialized timer reset on migration After migration of a powerpc LPAR, the kernel executes code to update the system state to reflect new platform characteristics. Such changes include modifications to device tree properties provided to the system by PHYP. Property notifications received by the post_mobility_fixup() code are passed along to the kernel in general through a call to of_update_property() which in turn passes such events back to all modules through entries like the '.notifier_call' function within the NUMA module. When the NUMA module updates its state, it resets its event timer. If this occurs after a previous call to stop_topology_update() or on a system without VPHN enabled, the code runs into an unitialized timer structure and crashes. This patch adds a safety check along this path toward the problem code. An example crash log is as follows. ibmvscsi 30000081: Re-enabling adapter! ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfsv3 nfs_acl nfs tcp_diag udp_diag inet_diag lockd unix_diag af_packet_diag netlink_diag grace fscache sunrpc xts vmx_crypto pseries_rng sg binfmt_misc ip_tables xfs libcrc32c sd_mod ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod CPU: 11 PID: 3067 Comm: drmgr Not tainted 4.17.0+ #179 ... NIP mod_timer+0x4c/0x400 LR reset_topology_timer+0x40/0x60 Call Trace: 0xc0000003f9407830 (unreliable) reset_topology_timer+0x40/0x60 dt_update_callback+0x100/0x120 notifier_call_chain+0x90/0x100 __blocking_notifier_call_chain+0x60/0x90 of_property_notify+0x90/0xd0 of_update_property+0x104/0x150 update_dt_property+0xdc/0x1f0 pseries_devicetree_update+0x2d0/0x510 post_mobility_fixup+0x7c/0xf0 migration_store+0xa4/0xc0 kobj_attr_store+0x30/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x16c/0x240 __vfs_write+0x40/0x200 vfs_write+0xc8/0x240 ksys_write+0x5c/0x100 system_call+0x58/0x6c Fixes: 5d88aa85c00b ("powerpc/pseries: Update CPU maps when device tree is updated") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Michael Bringmann Signed-off-by: Michael Ellerman --- arch/powerpc/mm/numa.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 35ac5422903a..b5a71baedbc2 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1452,7 +1452,8 @@ static struct timer_list topology_timer; static void reset_topology_timer(void) { - mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ); + if (vphn_enabled) + mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ); } #ifdef CONFIG_SMP -- cgit v1.2.3-59-g8ed1b From de5c95d0f518537f59ee5aef762abc46f868c377 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Thu, 20 Sep 2018 22:33:00 -0700 Subject: RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[] [] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [] dcb_doit+0x13a/0x210 [ 3551.726981] [] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [] ? dcb_doit+0x166/0x210 [ 3551.727007] [] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/bnxt_re/main.c | 93 +++++++++++++++--------------------- 1 file changed, 38 insertions(+), 55 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index 20b9f31052bf..85cd1a3593d6 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -78,7 +78,7 @@ static struct list_head bnxt_re_dev_list = LIST_HEAD_INIT(bnxt_re_dev_list); /* Mutex to protect the list of bnxt_re devices added */ static DEFINE_MUTEX(bnxt_re_dev_lock); static struct workqueue_struct *bnxt_re_wq; -static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev, bool lock_wait); +static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev); /* SR-IOV helper functions */ @@ -182,7 +182,7 @@ static void bnxt_re_shutdown(void *p) if (!rdev) return; - bnxt_re_ib_unreg(rdev, false); + bnxt_re_ib_unreg(rdev); } static void bnxt_re_stop_irq(void *handle) @@ -251,7 +251,7 @@ static struct bnxt_ulp_ops bnxt_re_ulp_ops = { /* Driver registration routines used to let the networking driver (bnxt_en) * to know that the RoCE driver is now installed */ -static int bnxt_re_unregister_netdev(struct bnxt_re_dev *rdev, bool lock_wait) +static int bnxt_re_unregister_netdev(struct bnxt_re_dev *rdev) { struct bnxt_en_dev *en_dev; int rc; @@ -260,14 +260,9 @@ static int bnxt_re_unregister_netdev(struct bnxt_re_dev *rdev, bool lock_wait) return -EINVAL; en_dev = rdev->en_dev; - /* Acquire rtnl lock if it is not invokded from netdev event */ - if (lock_wait) - rtnl_lock(); rc = en_dev->en_ops->bnxt_unregister_device(rdev->en_dev, BNXT_ROCE_ULP); - if (lock_wait) - rtnl_unlock(); return rc; } @@ -281,14 +276,12 @@ static int bnxt_re_register_netdev(struct bnxt_re_dev *rdev) en_dev = rdev->en_dev; - rtnl_lock(); rc = en_dev->en_ops->bnxt_register_device(en_dev, BNXT_ROCE_ULP, &bnxt_re_ulp_ops, rdev); - rtnl_unlock(); return rc; } -static int bnxt_re_free_msix(struct bnxt_re_dev *rdev, bool lock_wait) +static int bnxt_re_free_msix(struct bnxt_re_dev *rdev) { struct bnxt_en_dev *en_dev; int rc; @@ -298,13 +291,9 @@ static int bnxt_re_free_msix(struct bnxt_re_dev *rdev, bool lock_wait) en_dev = rdev->en_dev; - if (lock_wait) - rtnl_lock(); rc = en_dev->en_ops->bnxt_free_msix(rdev->en_dev, BNXT_ROCE_ULP); - if (lock_wait) - rtnl_unlock(); return rc; } @@ -320,7 +309,6 @@ static int bnxt_re_request_msix(struct bnxt_re_dev *rdev) num_msix_want = min_t(u32, BNXT_RE_MAX_MSIX, num_online_cpus()); - rtnl_lock(); num_msix_got = en_dev->en_ops->bnxt_request_msix(en_dev, BNXT_ROCE_ULP, rdev->msix_entries, num_msix_want); @@ -335,7 +323,6 @@ static int bnxt_re_request_msix(struct bnxt_re_dev *rdev) } rdev->num_msix = num_msix_got; done: - rtnl_unlock(); return rc; } @@ -358,24 +345,18 @@ static void bnxt_re_fill_fw_msg(struct bnxt_fw_msg *fw_msg, void *msg, fw_msg->timeout = timeout; } -static int bnxt_re_net_ring_free(struct bnxt_re_dev *rdev, u16 fw_ring_id, - bool lock_wait) +static int bnxt_re_net_ring_free(struct bnxt_re_dev *rdev, u16 fw_ring_id) { struct bnxt_en_dev *en_dev = rdev->en_dev; struct hwrm_ring_free_input req = {0}; struct hwrm_ring_free_output resp; struct bnxt_fw_msg fw_msg; - bool do_unlock = false; int rc = -EINVAL; if (!en_dev) return rc; memset(&fw_msg, 0, sizeof(fw_msg)); - if (lock_wait) { - rtnl_lock(); - do_unlock = true; - } bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_RING_FREE, -1, -1); req.ring_type = RING_ALLOC_REQ_RING_TYPE_L2_CMPL; @@ -386,8 +367,6 @@ static int bnxt_re_net_ring_free(struct bnxt_re_dev *rdev, u16 fw_ring_id, if (rc) dev_err(rdev_to_dev(rdev), "Failed to free HW ring:%d :%#x", req.ring_id, rc); - if (do_unlock) - rtnl_unlock(); return rc; } @@ -405,7 +384,6 @@ static int bnxt_re_net_ring_alloc(struct bnxt_re_dev *rdev, dma_addr_t *dma_arr, return rc; memset(&fw_msg, 0, sizeof(fw_msg)); - rtnl_lock(); bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_RING_ALLOC, -1, -1); req.enables = 0; req.page_tbl_addr = cpu_to_le64(dma_arr[0]); @@ -426,27 +404,21 @@ static int bnxt_re_net_ring_alloc(struct bnxt_re_dev *rdev, dma_addr_t *dma_arr, if (!rc) *fw_ring_id = le16_to_cpu(resp.ring_id); - rtnl_unlock(); return rc; } static int bnxt_re_net_stats_ctx_free(struct bnxt_re_dev *rdev, - u32 fw_stats_ctx_id, bool lock_wait) + u32 fw_stats_ctx_id) { struct bnxt_en_dev *en_dev = rdev->en_dev; struct hwrm_stat_ctx_free_input req = {0}; struct bnxt_fw_msg fw_msg; - bool do_unlock = false; int rc = -EINVAL; if (!en_dev) return rc; memset(&fw_msg, 0, sizeof(fw_msg)); - if (lock_wait) { - rtnl_lock(); - do_unlock = true; - } bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_STAT_CTX_FREE, -1, -1); req.stat_ctx_id = cpu_to_le32(fw_stats_ctx_id); @@ -457,8 +429,6 @@ static int bnxt_re_net_stats_ctx_free(struct bnxt_re_dev *rdev, dev_err(rdev_to_dev(rdev), "Failed to free HW stats context %#x", rc); - if (do_unlock) - rtnl_unlock(); return rc; } @@ -478,7 +448,6 @@ static int bnxt_re_net_stats_ctx_alloc(struct bnxt_re_dev *rdev, return rc; memset(&fw_msg, 0, sizeof(fw_msg)); - rtnl_lock(); bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_STAT_CTX_ALLOC, -1, -1); req.update_period_ms = cpu_to_le32(1000); @@ -490,7 +459,6 @@ static int bnxt_re_net_stats_ctx_alloc(struct bnxt_re_dev *rdev, if (!rc) *fw_stats_ctx_id = le32_to_cpu(resp.stat_ctx_id); - rtnl_unlock(); return rc; } @@ -929,19 +897,19 @@ fail: return rc; } -static void bnxt_re_free_nq_res(struct bnxt_re_dev *rdev, bool lock_wait) +static void bnxt_re_free_nq_res(struct bnxt_re_dev *rdev) { int i; for (i = 0; i < rdev->num_msix - 1; i++) { - bnxt_re_net_ring_free(rdev, rdev->nq[i].ring_id, lock_wait); + bnxt_re_net_ring_free(rdev, rdev->nq[i].ring_id); bnxt_qplib_free_nq(&rdev->nq[i]); } } -static void bnxt_re_free_res(struct bnxt_re_dev *rdev, bool lock_wait) +static void bnxt_re_free_res(struct bnxt_re_dev *rdev) { - bnxt_re_free_nq_res(rdev, lock_wait); + bnxt_re_free_nq_res(rdev); if (rdev->qplib_res.dpi_tbl.max) { bnxt_qplib_dealloc_dpi(&rdev->qplib_res, @@ -1219,7 +1187,7 @@ static int bnxt_re_setup_qos(struct bnxt_re_dev *rdev) return 0; } -static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev, bool lock_wait) +static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev) { int i, rc; @@ -1234,28 +1202,27 @@ static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev, bool lock_wait) cancel_delayed_work(&rdev->worker); bnxt_re_cleanup_res(rdev); - bnxt_re_free_res(rdev, lock_wait); + bnxt_re_free_res(rdev); if (test_and_clear_bit(BNXT_RE_FLAG_RCFW_CHANNEL_EN, &rdev->flags)) { rc = bnxt_qplib_deinit_rcfw(&rdev->rcfw); if (rc) dev_warn(rdev_to_dev(rdev), "Failed to deinitialize RCFW: %#x", rc); - bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id, - lock_wait); + bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id); bnxt_qplib_free_ctx(rdev->en_dev->pdev, &rdev->qplib_ctx); bnxt_qplib_disable_rcfw_channel(&rdev->rcfw); - bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id, lock_wait); + bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id); bnxt_qplib_free_rcfw_channel(&rdev->rcfw); } if (test_and_clear_bit(BNXT_RE_FLAG_GOT_MSIX, &rdev->flags)) { - rc = bnxt_re_free_msix(rdev, lock_wait); + rc = bnxt_re_free_msix(rdev); if (rc) dev_warn(rdev_to_dev(rdev), "Failed to free MSI-X vectors: %#x", rc); } if (test_and_clear_bit(BNXT_RE_FLAG_NETDEV_REGISTERED, &rdev->flags)) { - rc = bnxt_re_unregister_netdev(rdev, lock_wait); + rc = bnxt_re_unregister_netdev(rdev); if (rc) dev_warn(rdev_to_dev(rdev), "Failed to unregister with netdev: %#x", rc); @@ -1276,6 +1243,12 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev) { int i, j, rc; + bool locked; + + /* Acquire rtnl lock through out this function */ + rtnl_lock(); + locked = true; + /* Registered a new RoCE device instance to netdev */ rc = bnxt_re_register_netdev(rdev); if (rc) { @@ -1374,12 +1347,16 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev) schedule_delayed_work(&rdev->worker, msecs_to_jiffies(30000)); } + rtnl_unlock(); + locked = false; + /* Register ib dev */ rc = bnxt_re_register_ib(rdev); if (rc) { pr_err("Failed to register with IB: %#x\n", rc); goto fail; } + set_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags); dev_info(rdev_to_dev(rdev), "Device registered successfully"); for (i = 0; i < ARRAY_SIZE(bnxt_re_attributes); i++) { rc = device_create_file(&rdev->ibdev.dev, @@ -1395,7 +1372,6 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev) goto fail; } } - set_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags); ib_get_eth_speed(&rdev->ibdev, 1, &rdev->active_speed, &rdev->active_width); set_bit(BNXT_RE_FLAG_ISSUE_ROCE_STATS, &rdev->flags); @@ -1404,17 +1380,21 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev) return 0; free_sctx: - bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id, true); + bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id); free_ctx: bnxt_qplib_free_ctx(rdev->en_dev->pdev, &rdev->qplib_ctx); disable_rcfw: bnxt_qplib_disable_rcfw_channel(&rdev->rcfw); free_ring: - bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id, true); + bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id); free_rcfw: bnxt_qplib_free_rcfw_channel(&rdev->rcfw); fail: - bnxt_re_ib_unreg(rdev, true); + if (!locked) + rtnl_lock(); + bnxt_re_ib_unreg(rdev); + rtnl_unlock(); + return rc; } @@ -1567,7 +1547,7 @@ static int bnxt_re_netdev_event(struct notifier_block *notifier, */ if (atomic_read(&rdev->sched_count) > 0) goto exit; - bnxt_re_ib_unreg(rdev, false); + bnxt_re_ib_unreg(rdev); bnxt_re_remove_one(rdev); bnxt_re_dev_unreg(rdev); break; @@ -1646,7 +1626,10 @@ static void __exit bnxt_re_mod_exit(void) */ flush_workqueue(bnxt_re_wq); bnxt_re_dev_stop(rdev); - bnxt_re_ib_unreg(rdev, true); + /* Acquire the rtnl_lock as the L2 resources are freed here */ + rtnl_lock(); + bnxt_re_ib_unreg(rdev); + rtnl_unlock(); bnxt_re_remove_one(rdev); bnxt_re_dev_unreg(rdev); } -- cgit v1.2.3-59-g8ed1b From d8e2262a5044c1a05b4da51e5d0976f10c487a9f Mon Sep 17 00:00:00 2001 From: Saif Hasan Date: Fri, 21 Sep 2018 14:30:05 -0700 Subject: mpls: allow routes on ip6gre devices Summary: This appears to be necessary and sufficient change to enable `MPLS` on `ip6gre` tunnels (RFC4023). This diff allows IP6GRE devices to be recognized by MPLS kernel module and hence user can configure interface to accept packets with mpls headers as well setup mpls routes on them. Test Plan: Test plan consists of multiple containers connected via GRE-V6 tunnel. Then carrying out testing steps as below. - Carry out necessary sysctl settings on all containers ``` sysctl -w net.mpls.platform_labels=65536 sysctl -w net.mpls.ip_ttl_propagate=1 sysctl -w net.mpls.conf.lo.input=1 ``` - Establish IP6GRE tunnels ``` ip -6 tunnel add name if_1_2_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::2 key 1 ip link set dev if_1_2_1 up sysctl -w net.mpls.conf.if_1_2_1.input=1 ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link ip -6 tunnel add name if_1_3_1 mode ip6gre \ local 2401:db00:21:6048:feed:0::1 \ remote 2401:db00:21:6048:feed:0::3 key 1 ip link set dev if_1_3_1 up sysctl -w net.mpls.conf.if_1_3_1.input=1 ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link ``` - Install MPLS encap rules on node-1 towards node-2 ``` ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \ via inet 169.254.0.3 dev if_1_2_1 ``` - Install MPLS forwarding rules on node-2 and node-3 ``` // node2 ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1 // node3 ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1 ``` - Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing towards 192.168.0.1 is via IP route directly towards node1 from node4) ``` ping 192.168.0.11 ``` - tcpdump on interface to capture ping packets wrapped within MPLS header which inturn wrapped within IP6GRE header ``` 16:43:41.121073 IP6 2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2: DSTOPT GREv0, key=0x1, length 100: MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255) IP 192.168.0.1 > 192.168.0.11: ICMP echo request, id 1208, seq 45, length 64 0x0000: 6000 2cdb 006c 3c3f 2401 db00 0021 6048 `.,..l Signed-off-by: David S. Miller --- net/mpls/af_mpls.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c index 7a4de6d618b1..8fbe6cdbe255 100644 --- a/net/mpls/af_mpls.c +++ b/net/mpls/af_mpls.c @@ -1533,10 +1533,14 @@ static int mpls_dev_notify(struct notifier_block *this, unsigned long event, unsigned int flags; if (event == NETDEV_REGISTER) { - /* For now just support Ethernet, IPGRE, SIT and IPIP devices */ + + /* For now just support Ethernet, IPGRE, IP6GRE, SIT and + * IPIP devices + */ if (dev->type == ARPHRD_ETHER || dev->type == ARPHRD_LOOPBACK || dev->type == ARPHRD_IPGRE || + dev->type == ARPHRD_IP6GRE || dev->type == ARPHRD_SIT || dev->type == ARPHRD_TUNNEL) { mdev = mpls_add_dev(dev); -- cgit v1.2.3-59-g8ed1b From ccfec9e5cb2d48df5a955b7bf47f7782157d3bc2 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Mon, 24 Sep 2018 15:48:19 +0200 Subject: ip_tunnel: be careful when accessing the inner header Cong noted that we need the same checks introduced by commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") even for ipv4 tunnels. Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Suggested-by: Cong Wang Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index c4f5602308ed..284a22154b4e 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -627,6 +627,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, const struct iphdr *tnl_params, u8 protocol) { struct ip_tunnel *tunnel = netdev_priv(dev); + unsigned int inner_nhdr_len = 0; const struct iphdr *inner_iph; struct flowi4 fl4; u8 tos, ttl; @@ -636,6 +637,14 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, __be32 dst; bool connected; + /* ensure we can access the inner net header, for several users below */ + if (skb->protocol == htons(ETH_P_IP)) + inner_nhdr_len = sizeof(struct iphdr); + else if (skb->protocol == htons(ETH_P_IPV6)) + inner_nhdr_len = sizeof(struct ipv6hdr); + if (unlikely(!pskb_may_pull(skb, inner_nhdr_len))) + goto tx_error; + inner_iph = (const struct iphdr *)skb_inner_network_header(skb); connected = (tunnel->parms.iph.daddr != 0); -- cgit v1.2.3-59-g8ed1b From f4a518797b40e956b6e6220b42657e045dc24470 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Mon, 24 Sep 2018 16:56:13 +0200 Subject: net: mvneta: fix the remaining Rx descriptor unmapping issues With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in various places of the mvneta driver, for example when putting down an interface while traffic is passing through. The issue is when using s/w buffer management, the Rx buffers are mapped using dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: Antoine Tenart Reviewed-by: Gregory CLEMENT Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 2db9708f2e24..b4ed7d394d07 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1890,8 +1890,8 @@ static void mvneta_rxq_drop_pkts(struct mvneta_port *pp, if (!data || !(rx_desc->buf_phys_addr)) continue; - dma_unmap_single(pp->dev->dev.parent, rx_desc->buf_phys_addr, - MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE); + dma_unmap_page(pp->dev->dev.parent, rx_desc->buf_phys_addr, + PAGE_SIZE, DMA_FROM_DEVICE); __free_page(data); } } @@ -2039,9 +2039,8 @@ static int mvneta_rx_swbm(struct napi_struct *napi, frag_offset, frag_size, PAGE_SIZE); - dma_unmap_single(dev->dev.parent, phys_addr, - PAGE_SIZE, - DMA_FROM_DEVICE); + dma_unmap_page(dev->dev.parent, phys_addr, + PAGE_SIZE, DMA_FROM_DEVICE); rxq->left_size -= frag_size; } -- cgit v1.2.3-59-g8ed1b From 57a489786de9ec37d6e25ef1305dc337047f0236 Mon Sep 17 00:00:00 2001 From: James Cowgill Date: Thu, 6 Sep 2018 22:57:56 +0100 Subject: RISC-V: include linux/ftrace.h in asm-prototypes.h Building a riscv kernel with CONFIG_FUNCTION_TRACER and CONFIG_MODVERSIONS enabled results in these two warnings: MODPOST vmlinux.o WARNING: EXPORT symbol "return_to_handler" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned. When exporting symbols from an assembly file, the MODVERSIONS code requires their prototypes to be defined in asm-prototypes.h (see scripts/Makefile.build). Since both of these symbols have prototypes defined in linux/ftrace.h, include this header from RISC-V's asm-prototypes.h. Reported-by: Karsten Merker Signed-off-by: James Cowgill Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/asm-prototypes.h | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 arch/riscv/include/asm/asm-prototypes.h diff --git a/arch/riscv/include/asm/asm-prototypes.h b/arch/riscv/include/asm/asm-prototypes.h new file mode 100644 index 000000000000..c9fecd120d18 --- /dev/null +++ b/arch/riscv/include/asm/asm-prototypes.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_RISCV_PROTOTYPES_H + +#include +#include + +#endif /* _ASM_RISCV_PROTOTYPES_H */ -- cgit v1.2.3-59-g8ed1b From 74bc2abca7603c956d1e331e8b9bee7b874c1eec Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Mon, 27 Aug 2018 12:56:24 +0200 Subject: iommu/rockchip: Free irqs in shutdown handler In the iommu's shutdown handler we disable runtime-pm which could result in the irq-handler running unclocked and since commit 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework") we warn about that fact. This can cause warnings on shutdown on some Rockchip machines, so free the irqs in the shutdown handler before we disable runtime-pm. Reported-by: Enric Balletbo i Serra Fixes: 3fc7c5c0cff3 ("iommu/rockchip: Handle errors returned from PM framework") Signed-off-by: Heiko Stuebner Tested-by: Enric Balletbo i Serra Acked-by: Marc Zyngier Signed-off-by: Joerg Roedel --- drivers/iommu/rockchip-iommu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c index 258115b10fa9..ad3e2b97469e 100644 --- a/drivers/iommu/rockchip-iommu.c +++ b/drivers/iommu/rockchip-iommu.c @@ -1241,6 +1241,12 @@ err_unprepare_clocks: static void rk_iommu_shutdown(struct platform_device *pdev) { + struct rk_iommu *iommu = platform_get_drvdata(pdev); + int i = 0, irq; + + while ((irq = platform_get_irq(pdev, i++)) != -ENXIO) + devm_free_irq(iommu->dev, irq, iommu); + pm_runtime_force_suspend(&pdev->dev); } -- cgit v1.2.3-59-g8ed1b From b85bfa246efd24ea3fdb5ee949c28e3110c6d299 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Sat, 22 Sep 2018 13:58:26 -0600 Subject: pinctrl/amd: poll InterruptEnable bits in amd_gpio_irq_set_type From the AMD BKDG, if WAKE_INT_MASTER_REG.MaskStsEn is set, a software write to the debounce registers of *any* gpio will block wake/interrupt status generation for *all* gpios for a length of time that depends on WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the Interrupt Delivery bit (INTERRUPT_ENABLE) will read as 0. In commit 4c1de0414a1340 ("pinctrl/amd: poll InterruptEnable bits in enable_irq") we tried to fix this same "gpio Interrupts are blocked immediately after writing debounce registers" problem, but incorrectly assumed it only affected the gpio whose debounce was being configured and not ALL gpios. To solve this for all gpios, we move the polling loop from amd_gpio_irq_enable() to amd_gpio_irq_set_type(), while holding the gpio spinlock. This ensures that another gpio operation (e.g. amd_gpio_irq_unmask()) can read a temporarily disabled IRQ and incorrectly disable it while trying to modify some other register bits. Fixes: 4c1de0414a1340 pinctrl/amd: poll InterruptEnable bits in enable_irq Signed-off-by: Daniel Kurtz Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 41ccc759b8b8..1425c2874d40 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -348,21 +348,12 @@ static void amd_gpio_irq_enable(struct irq_data *d) unsigned long flags; struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct amd_gpio *gpio_dev = gpiochip_get_data(gc); - u32 mask = BIT(INTERRUPT_ENABLE_OFF) | BIT(INTERRUPT_MASK_OFF); raw_spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); pin_reg |= BIT(INTERRUPT_ENABLE_OFF); pin_reg |= BIT(INTERRUPT_MASK_OFF); writel(pin_reg, gpio_dev->base + (d->hwirq)*4); - /* - * When debounce logic is enabled it takes ~900 us before interrupts - * can be enabled. During this "debounce warm up" period the - * "INTERRUPT_ENABLE" bit will read as 0. Poll the bit here until it - * reads back as 1, signaling that interrupts are now enabled. - */ - while ((readl(gpio_dev->base + (d->hwirq)*4) & mask) != mask) - continue; raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); } @@ -426,7 +417,7 @@ static void amd_gpio_irq_eoi(struct irq_data *d) static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type) { int ret = 0; - u32 pin_reg; + u32 pin_reg, pin_reg_irq_en, mask; unsigned long flags, irq_flags; struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct amd_gpio *gpio_dev = gpiochip_get_data(gc); @@ -495,6 +486,28 @@ static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type) } pin_reg |= CLR_INTR_STAT << INTERRUPT_STS_OFF; + /* + * If WAKE_INT_MASTER_REG.MaskStsEn is set, a software write to the + * debounce registers of any GPIO will block wake/interrupt status + * generation for *all* GPIOs for a lenght of time that depends on + * WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the + * INTERRUPT_ENABLE bit will read as 0. + * + * We temporarily enable irq for the GPIO whose configuration is + * changing, and then wait for it to read back as 1 to know when + * debounce has settled and then disable the irq again. + * We do this polling with the spinlock held to ensure other GPIO + * access routines do not read an incorrect value for the irq enable + * bit of other GPIOs. We keep the GPIO masked while polling to avoid + * spurious irqs, and disable the irq again after polling. + */ + mask = BIT(INTERRUPT_ENABLE_OFF); + pin_reg_irq_en = pin_reg; + pin_reg_irq_en |= mask; + pin_reg_irq_en &= ~BIT(INTERRUPT_MASK_OFF); + writel(pin_reg_irq_en, gpio_dev->base + (d->hwirq)*4); + while ((readl(gpio_dev->base + (d->hwirq)*4) & mask) != mask) + continue; writel(pin_reg, gpio_dev->base + (d->hwirq)*4); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); -- cgit v1.2.3-59-g8ed1b From e50d95e2ad1266f8d3fcdf0724f03dbdffd400aa Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 24 Sep 2018 17:32:11 +0300 Subject: pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant It turns out the HOSTSW_OWN register offset is different between LP and H variants. The latter should use 0xc0 instead so fix that. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199911 Fixes: a663ccf0fea1 ("pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller support") Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cannonlake.c | 33 ++++++++++++++++++------------ 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c index 8d48371caaa2..e7f45d96b0cb 100644 --- a/drivers/pinctrl/intel/pinctrl-cannonlake.c +++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c @@ -15,10 +15,11 @@ #include "pinctrl-intel.h" -#define CNL_PAD_OWN 0x020 -#define CNL_PADCFGLOCK 0x080 -#define CNL_HOSTSW_OWN 0x0b0 -#define CNL_GPI_IE 0x120 +#define CNL_PAD_OWN 0x020 +#define CNL_PADCFGLOCK 0x080 +#define CNL_LP_HOSTSW_OWN 0x0b0 +#define CNL_H_HOSTSW_OWN 0x0c0 +#define CNL_GPI_IE 0x120 #define CNL_GPP(r, s, e, g) \ { \ @@ -30,12 +31,12 @@ #define CNL_NO_GPIO -1 -#define CNL_COMMUNITY(b, s, e, g) \ +#define CNL_COMMUNITY(b, s, e, o, g) \ { \ .barno = (b), \ .padown_offset = CNL_PAD_OWN, \ .padcfglock_offset = CNL_PADCFGLOCK, \ - .hostown_offset = CNL_HOSTSW_OWN, \ + .hostown_offset = (o), \ .ie_offset = CNL_GPI_IE, \ .pin_base = (s), \ .npins = ((e) - (s) + 1), \ @@ -43,6 +44,12 @@ .ngpps = ARRAY_SIZE(g), \ } +#define CNLLP_COMMUNITY(b, s, e, g) \ + CNL_COMMUNITY(b, s, e, CNL_LP_HOSTSW_OWN, g) + +#define CNLH_COMMUNITY(b, s, e, g) \ + CNL_COMMUNITY(b, s, e, CNL_H_HOSTSW_OWN, g) + /* Cannon Lake-H */ static const struct pinctrl_pin_desc cnlh_pins[] = { /* GPP_A */ @@ -442,10 +449,10 @@ static const struct intel_function cnlh_functions[] = { }; static const struct intel_community cnlh_communities[] = { - CNL_COMMUNITY(0, 0, 50, cnlh_community0_gpps), - CNL_COMMUNITY(1, 51, 154, cnlh_community1_gpps), - CNL_COMMUNITY(2, 155, 248, cnlh_community3_gpps), - CNL_COMMUNITY(3, 249, 298, cnlh_community4_gpps), + CNLH_COMMUNITY(0, 0, 50, cnlh_community0_gpps), + CNLH_COMMUNITY(1, 51, 154, cnlh_community1_gpps), + CNLH_COMMUNITY(2, 155, 248, cnlh_community3_gpps), + CNLH_COMMUNITY(3, 249, 298, cnlh_community4_gpps), }; static const struct intel_pinctrl_soc_data cnlh_soc_data = { @@ -803,9 +810,9 @@ static const struct intel_padgroup cnllp_community4_gpps[] = { }; static const struct intel_community cnllp_communities[] = { - CNL_COMMUNITY(0, 0, 67, cnllp_community0_gpps), - CNL_COMMUNITY(1, 68, 180, cnllp_community1_gpps), - CNL_COMMUNITY(2, 181, 243, cnllp_community4_gpps), + CNLLP_COMMUNITY(0, 0, 67, cnllp_community0_gpps), + CNLLP_COMMUNITY(1, 68, 180, cnllp_community1_gpps), + CNLLP_COMMUNITY(2, 181, 243, cnllp_community4_gpps), }; static const struct intel_pinctrl_soc_data cnllp_soc_data = { -- cgit v1.2.3-59-g8ed1b From 72923e5488f0604fac8ef2c7e683fabd3b4c203b Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 24 Sep 2018 17:32:12 +0300 Subject: Revert "pinctrl: intel: Do pin translation when lock IRQ" This reverts commit 55aedef50d4d810670916d9fce4a40d5da2079e7. Commit 55aedef50d4d ("pinctrl: intel: Do pin translation when lock IRQ") added special translation from GPIO number to hardware pin number to irq_reqres/relres hooks to avoid failure when IRQs are requested. The actual failure happened inside gpiochip_lock_as_irq() because it calls gpiod_get_direction() and pinctrl-intel.c::intel_gpio_get_direction() implementation originally missed the translation so the two hooks made it work by skipping the ->get_direction() call entirely (it overwrote the default GPIOLIB provided functions). The proper fix that adds translation to GPIO callbacks was merged with commit 96147db1e1df ("pinctrl: intel: Do pin translation in other GPIO operations as well"). This allows us to use the default GPIOLIB provided functions again. In addition as find out by Benjamin Tissoires the two functions (intel_gpio_irq_reqres()/intel_gpio_irq_relres()) now cause problems of their own because they operate on pin numbers and pass that pin number to gpiochip_lock_as_irq() which actually expects a GPIO number. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199911 Fixes: 55aedef50d4d ("pinctrl: intel: Do pin translation when lock IRQ") Reported-and-tested-by: Benjamin Tissoires Signed-off-by: Mika Westerberg Acked-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-intel.c | 32 -------------------------------- 1 file changed, 32 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index ec8dafc94694..1ea3438ea67e 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -887,36 +887,6 @@ static const struct gpio_chip intel_gpio_chip = { .set_config = gpiochip_generic_config, }; -static int intel_gpio_irq_reqres(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct intel_pinctrl *pctrl = gpiochip_get_data(gc); - int pin; - int ret; - - pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), NULL, NULL); - if (pin >= 0) { - ret = gpiochip_lock_as_irq(gc, pin); - if (ret) { - dev_err(pctrl->dev, "unable to lock HW IRQ %d for IRQ\n", - pin); - return ret; - } - } - return 0; -} - -static void intel_gpio_irq_relres(struct irq_data *d) -{ - struct gpio_chip *gc = irq_data_get_irq_chip_data(d); - struct intel_pinctrl *pctrl = gpiochip_get_data(gc); - int pin; - - pin = intel_gpio_to_pin(pctrl, irqd_to_hwirq(d), NULL, NULL); - if (pin >= 0) - gpiochip_unlock_as_irq(gc, pin); -} - static void intel_gpio_irq_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); @@ -1132,8 +1102,6 @@ static irqreturn_t intel_gpio_irq(int irq, void *data) static struct irq_chip intel_gpio_irqchip = { .name = "intel-gpio", - .irq_request_resources = intel_gpio_irq_reqres, - .irq_release_resources = intel_gpio_irq_relres, .irq_enable = intel_gpio_irq_enable, .irq_ack = intel_gpio_irq_ack, .irq_mask = intel_gpio_irq_mask, -- cgit v1.2.3-59-g8ed1b From 8c0f9f5b309d627182d5da72a69246f58bde1026 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 24 Sep 2018 13:18:34 +0100 Subject: Revert "uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name" This changes UAPI, breaking iwd and libell: ell/key.c: In function 'kernel_dh_compute': ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'? struct keyctl_dh_params params = { .private = private, ^~~~~~~ dh_private This reverts commit 8a2336e549d385bb0b46880435b411df8d8200e8. Fixes: 8a2336e549d3 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name") Signed-off-by: Lubomir Rintel Signed-off-by: David Howells cc: Randy Dunlap cc: Mat Martineau cc: Stephan Mueller cc: James Morris cc: "Serge E. Hallyn" cc: Mat Martineau cc: Andrew Morton cc: Linus Torvalds cc: Signed-off-by: James Morris Signed-off-by: Greg Kroah-Hartman --- include/uapi/linux/keyctl.h | 2 +- security/keys/dh.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h index 910cc4334b21..7b8c9e19bad1 100644 --- a/include/uapi/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h @@ -65,7 +65,7 @@ /* keyctl structures */ struct keyctl_dh_params { - __s32 dh_private; + __s32 private; __s32 prime; __s32 base; }; diff --git a/security/keys/dh.c b/security/keys/dh.c index 3b602a1e27fa..711e89d8c415 100644 --- a/security/keys/dh.c +++ b/security/keys/dh.c @@ -300,7 +300,7 @@ long __keyctl_dh_compute(struct keyctl_dh_params __user *params, } dh_inputs.g_size = dlen; - dlen = dh_data_from_key(pcopy.dh_private, &dh_inputs.key); + dlen = dh_data_from_key(pcopy.private, &dh_inputs.key); if (dlen < 0) { ret = dlen; goto out2; -- cgit v1.2.3-59-g8ed1b From be9e6598aeb0db70a7927d6b3bb4d3d6fb1c3e18 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sat, 8 Sep 2018 09:42:53 +0800 Subject: iommu/vt-d: Handle memory shortage on pasid table allocation Pasid table memory allocation could return failure due to memory shortage. Limit the pasid table size to 1MiB because current 8MiB contiguous physical memory allocation can be hard to come by. W/o a PASID table, the device could continue to work with only shared virtual memory impacted. So, let's go ahead with context mapping even the memory allocation for pasid table failed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783 Fixes: cc580e41260d ("iommu/vt-d: Per PCI device pasid table interfaces") Cc: Ashok Raj Cc: Jacob Pan Cc: Mika Westerberg Reported-and-tested-by: Pelton Kyle D Tested-by: Mika Westerberg Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 6 +++--- drivers/iommu/intel-pasid.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 5f3f10cf9d9d..bedc801b06a0 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -2540,9 +2540,9 @@ static struct dmar_domain *dmar_insert_one_dev_info(struct intel_iommu *iommu, if (dev && dev_is_pci(dev) && info->pasid_supported) { ret = intel_pasid_alloc_table(dev); if (ret) { - __dmar_remove_one_dev_info(info); - spin_unlock_irqrestore(&device_domain_lock, flags); - return NULL; + pr_warn("No pasid table for %s, pasid disabled\n", + dev_name(dev)); + info->pasid_supported = 0; } } spin_unlock_irqrestore(&device_domain_lock, flags); diff --git a/drivers/iommu/intel-pasid.h b/drivers/iommu/intel-pasid.h index 1c05ed6fc5a5..1fb5e12b029a 100644 --- a/drivers/iommu/intel-pasid.h +++ b/drivers/iommu/intel-pasid.h @@ -11,7 +11,7 @@ #define __INTEL_PASID_H #define PASID_MIN 0x1 -#define PASID_MAX 0x100000 +#define PASID_MAX 0x20000 struct pasid_entry { u64 val; -- cgit v1.2.3-59-g8ed1b From cf13435b730a502e814c63c84d93db131e563f5f Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 24 Sep 2018 17:27:04 +1000 Subject: powerpc/tm: Fix userspace r13 corruption When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct. Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13. To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct. Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address. Signed-off-by: Michael Neuling Reviewed-by: Breno Leitao Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/tm.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 6bffbc5affe7..183e8d75936f 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -176,13 +176,20 @@ _GLOBAL(tm_reclaim) std r1, PACATMSCRATCH(r13) ld r1, PACAR1(r13) - /* Store the PPR in r11 and reset to decent value */ std r11, GPR11(r1) /* Temporary stash */ + /* + * Store r13 away so we can free up the scratch SPR for the SLB fault + * handler (needed once we start accessing the thread_struct). + */ + GET_SCRATCH0(r11) + std r11, GPR13(r1) + /* Reset MSR RI so we can take SLB faults again */ li r11, MSR_RI mtmsrd r11, 1 + /* Store the PPR in r11 and reset to decent value */ mfspr r11, SPRN_PPR HMT_MEDIUM @@ -211,7 +218,7 @@ _GLOBAL(tm_reclaim) ld r4, GPR7(r1) /* user r7 */ ld r5, GPR11(r1) /* user r11 */ ld r6, GPR12(r1) /* user r12 */ - GET_SCRATCH0(8) /* user r13 */ + ld r8, GPR13(r1) /* user r13 */ std r3, GPR1(r7) std r4, GPR7(r7) std r5, GPR11(r7) -- cgit v1.2.3-59-g8ed1b From 96dc89d526ef77604376f06220e3d2931a0bfd58 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 25 Sep 2018 19:36:47 +1000 Subject: powerpc/tm: Avoid possible userspace r1 corruption on reclaim Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct. In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do. We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is. This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on. Suggested-by: Breno Leitao Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/tm.S | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index 183e8d75936f..7716374786bd 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -178,6 +178,13 @@ _GLOBAL(tm_reclaim) std r11, GPR11(r1) /* Temporary stash */ + /* + * Move the saved user r1 to the kernel stack in case PACATMSCRATCH is + * clobbered by an exception once we turn on MSR_RI below. + */ + ld r11, PACATMSCRATCH(r13) + std r11, GPR1(r1) + /* * Store r13 away so we can free up the scratch SPR for the SLB fault * handler (needed once we start accessing the thread_struct). @@ -214,7 +221,7 @@ _GLOBAL(tm_reclaim) SAVE_GPR(8, r7) /* user r8 */ SAVE_GPR(9, r7) /* user r9 */ SAVE_GPR(10, r7) /* user r10 */ - ld r3, PACATMSCRATCH(r13) /* user r1 */ + ld r3, GPR1(r1) /* user r1 */ ld r4, GPR7(r1) /* user r7 */ ld r5, GPR11(r1) /* user r11 */ ld r6, GPR12(r1) /* user r12 */ -- cgit v1.2.3-59-g8ed1b From 2483ef056f6e42f61cd266452e2841165dfe1b5c Mon Sep 17 00:00:00 2001 From: Srikar Dronamraju Date: Tue, 25 Sep 2018 17:55:15 +0530 Subject: powerpc/numa: Use associativity if VPHN hcall is successful Currently associativity is used to lookup node-id even if the preceding VPHN hcall failed. However this can cause CPU to be made part of the wrong node, (most likely to be node 0). This is because VPHN is not enabled on KVM guests. With 2ea6263 ("powerpc/topology: Get topology for shared processors at boot"), associativity is used to set to the wrong node. Hence KVM guest topology is broken. For example : A 4 node KVM guest before would have reported. [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 node 0 size: 1746 MB node 0 free: 1604 MB node 1 cpus: 4 5 6 7 node 1 size: 2044 MB node 1 free: 1765 MB node 2 cpus: 8 9 10 11 node 2 size: 2044 MB node 2 free: 1837 MB node 3 cpus: 12 13 14 15 node 3 size: 2044 MB node 3 free: 1903 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Would now report: [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 1746 MB node 0 free: 1244 MB node 1 cpus: node 1 size: 2044 MB node 1 free: 2032 MB node 2 cpus: 1 node 2 size: 2044 MB node 2 free: 2028 MB node 3 cpus: node 3 size: 2044 MB node 3 free: 2032 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Fix this by skipping associativity lookup if the VPHN hcall failed. Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") Signed-off-by: Srikar Dronamraju Signed-off-by: Michael Ellerman --- arch/powerpc/mm/numa.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b5a71baedbc2..59d07bd5374a 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1204,7 +1204,9 @@ int find_and_online_cpu_nid(int cpu) int new_nid; /* Use associativity from first thread for all siblings */ - vphn_get_associativity(cpu, associativity); + if (vphn_get_associativity(cpu, associativity)) + return cpu_to_node(cpu); + new_nid = associativity_to_nid(associativity); if (new_nid < 0 || !node_possible(new_nid)) new_nid = first_online_node; -- cgit v1.2.3-59-g8ed1b From a9360abd3de0aad745d25d003923d56afb28a04b Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Tue, 25 Sep 2018 11:23:55 +0300 Subject: IB/uverbs: Free uapi on destroy Make sure we free struct uverbs_api once we clean the radix tree. It was allocated by uverbs_alloc_api(). Fixes: 9ed3e5f44772 ("IB/uverbs: Build the specs into a radix tree at runtime") Reported-by: Bart Van Assche Signed-off-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_uapi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/core/uverbs_uapi.c b/drivers/infiniband/core/uverbs_uapi.c index 73ea6f0db88f..be854628a7c6 100644 --- a/drivers/infiniband/core/uverbs_uapi.c +++ b/drivers/infiniband/core/uverbs_uapi.c @@ -248,6 +248,7 @@ void uverbs_destroy_api(struct uverbs_api *uapi) kfree(rcu_dereference_protected(*slot, true)); radix_tree_iter_delete(&uapi->radix, &iter, slot); } + kfree(uapi); } struct uverbs_api *uverbs_alloc_api( -- cgit v1.2.3-59-g8ed1b From e8ef090a614292db01b5956a6f5467afbe6c5cf7 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 25 Sep 2018 12:11:12 +0300 Subject: IB/mlx5: Destroy the DEVX object upon error flow Upon DEVX object creation the object must be destroyed upon a follows error flow. Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/devx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/devx.c b/drivers/infiniband/hw/mlx5/devx.c index ac116d63e466..f2f11e652dcd 100644 --- a/drivers/infiniband/hw/mlx5/devx.c +++ b/drivers/infiniband/hw/mlx5/devx.c @@ -723,6 +723,7 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)( attrs, MLX5_IB_ATTR_DEVX_OBJ_CREATE_HANDLE); struct mlx5_ib_ucontext *c = to_mucontext(uobj->context); struct mlx5_ib_dev *dev = to_mdev(c->ibucontext.device); + u32 out[MLX5_ST_SZ_DW(general_obj_out_cmd_hdr)]; struct devx_obj *obj; int err; @@ -754,10 +755,12 @@ static int UVERBS_HANDLER(MLX5_IB_METHOD_DEVX_OBJ_CREATE)( err = uverbs_copy_to(attrs, MLX5_IB_ATTR_DEVX_OBJ_CREATE_CMD_OUT, cmd_out, cmd_out_len); if (err) - goto obj_free; + goto obj_destroy; return 0; +obj_destroy: + mlx5_cmd_exec(obj->mdev, obj->dinbox, obj->dinlen, out, sizeof(out)); obj_free: kfree(obj); return err; -- cgit v1.2.3-59-g8ed1b From 5c5702e259dc66e6fceed5117effab79c186e87a Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Tue, 25 Sep 2018 12:10:40 +0300 Subject: RDMA/core: Set right entry state before releasing reference Currently add_modify_gid() for IB link layer has followong issue in cache update path. When GID update event occurs, core releases reference to the GID table without updating its state and/or entry pointer. CPU-0 CPU-1 ------ ----- ib_cache_update() IPoIB ULP add_modify_gid() [..] put_gid_entry() refcnt = 0, but state = valid, entry is valid. (work item is not yet executed). ipoib_create_ah() rdma_create_ah() rdma_get_gid_attr() <-- Tries to acquire gid_attr which has refcnt = 0. This is incorrect. GID entry state and entry pointer is provides the accurate GID enty state. Such fields must be updated with rwlock to protect against readers and, such fields must be in sane state before refcount can drop to zero. Otherwise above race condition can happen leading to use-after-free situation. Following backtrace has been observed when cache update for an IB port is triggered while IPoIB ULP is creating an AH. Therefore, when updating GID entry, first mark a valid entry as invalid through state and set the barrier so that no callers can acquired the GID entry, followed by release reference to it. refcount_t: increment on 0; use-after-free. WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:refcount_inc_checked+0x30/0x50 RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100 RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8 R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202 FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0 IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready Call Trace: rdma_get_gid_attr+0x220/0x310 [ib_core] ? lock_acquire+0x145/0x3a0 rdma_fill_sgid_attr+0x32c/0x470 [ib_core] rdma_create_ah+0x89/0x160 [ib_core] ? rdma_fill_sgid_attr+0x470/0x470 [ib_core] ? ipoib_create_ah+0x52/0x260 [ib_ipoib] ipoib_create_ah+0xf5/0x260 [ib_ipoib] ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib] Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts") Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/cache.c | 68 ++++++++++++++++++++--------------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 0bee1f4b914e..3208ad6ad540 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -337,6 +337,39 @@ static int add_roce_gid(struct ib_gid_table_entry *entry) return 0; } +/** + * del_gid - Delete GID table entry + * + * @ib_dev: IB device whose GID entry to be deleted + * @port: Port number of the IB device + * @table: GID table of the IB device for a port + * @ix: GID entry index to delete + * + */ +static void del_gid(struct ib_device *ib_dev, u8 port, + struct ib_gid_table *table, int ix) +{ + struct ib_gid_table_entry *entry; + + lockdep_assert_held(&table->lock); + + pr_debug("%s device=%s port=%d index=%d gid %pI6\n", __func__, + ib_dev->name, port, ix, + table->data_vec[ix]->attr.gid.raw); + + write_lock_irq(&table->rwlock); + entry = table->data_vec[ix]; + entry->state = GID_TABLE_ENTRY_PENDING_DEL; + /* + * For non RoCE protocol, GID entry slot is ready to use. + */ + if (!rdma_protocol_roce(ib_dev, port)) + table->data_vec[ix] = NULL; + write_unlock_irq(&table->rwlock); + + put_gid_entry_locked(entry); +} + /** * add_modify_gid - Add or modify GID table entry * @@ -358,7 +391,7 @@ static int add_modify_gid(struct ib_gid_table *table, * this index. */ if (is_gid_entry_valid(table->data_vec[attr->index])) - put_gid_entry(table->data_vec[attr->index]); + del_gid(attr->device, attr->port_num, table, attr->index); /* * Some HCA's report multiple GID entries with only one valid GID, and @@ -386,39 +419,6 @@ done: return ret; } -/** - * del_gid - Delete GID table entry - * - * @ib_dev: IB device whose GID entry to be deleted - * @port: Port number of the IB device - * @table: GID table of the IB device for a port - * @ix: GID entry index to delete - * - */ -static void del_gid(struct ib_device *ib_dev, u8 port, - struct ib_gid_table *table, int ix) -{ - struct ib_gid_table_entry *entry; - - lockdep_assert_held(&table->lock); - - pr_debug("%s device=%s port=%d index=%d gid %pI6\n", __func__, - ib_dev->name, port, ix, - table->data_vec[ix]->attr.gid.raw); - - write_lock_irq(&table->rwlock); - entry = table->data_vec[ix]; - entry->state = GID_TABLE_ENTRY_PENDING_DEL; - /* - * For non RoCE protocol, GID entry slot is ready to use. - */ - if (!rdma_protocol_roce(ib_dev, port)) - table->data_vec[ix] = NULL; - write_unlock_irq(&table->rwlock); - - put_gid_entry_locked(entry); -} - /* rwlock should be read locked, or lock should be held */ static int find_gid(struct ib_gid_table *table, const union ib_gid *gid, const struct ib_gid_attr *val, bool default_gid, -- cgit v1.2.3-59-g8ed1b From 974c24c5bed75b53e229a6f68a0533b6d5f48feb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 11 Sep 2018 11:00:49 +0200 Subject: dma-mapping: add the missing ARCH_HAS_SYNC_DMA_FOR_CPU_ALL declaration The patch adding the infrastructure failed to actually add the symbol declaration, oops.. Fixes: faef87723a ("dma-noncoherent: add a arch_sync_dma_for_cpu_all hook") Signed-off-by: Christoph Hellwig Reviewed-by: Paul Burton Acked-by: Florian Fainelli Signed-off-by: Christoph Hellwig --- kernel/dma/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig index 9bd54304446f..1b1d63b3634b 100644 --- a/kernel/dma/Kconfig +++ b/kernel/dma/Kconfig @@ -23,6 +23,9 @@ config ARCH_HAS_SYNC_DMA_FOR_CPU bool select NEED_DMA_MAP_STATE +config ARCH_HAS_SYNC_DMA_FOR_CPU_ALL + bool + config DMA_DIRECT_OPS bool depends on HAS_DMA -- cgit v1.2.3-59-g8ed1b From bb830add192e9d8338082c0fc2c209e23b43d865 Mon Sep 17 00:00:00 2001 From: Susobhan Dey Date: Tue, 25 Sep 2018 12:29:15 -0700 Subject: nvme: properly propagate errors in nvme_mpath_init Signed-off-by: Susobhan Dey Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 5a9562881d4e..9fe3fff818b8 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -537,8 +537,10 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) INIT_WORK(&ctrl->ana_work, nvme_ana_work); ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL); - if (!ctrl->ana_log_buf) + if (!ctrl->ana_log_buf) { + error = -ENOMEM; goto out; + } error = nvme_read_ana_log(ctrl, true); if (error) @@ -547,7 +549,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) out_free_ana_log_buf: kfree(ctrl->ana_log_buf); out: - return -ENOMEM; + return error; } void nvme_mpath_uninit(struct nvme_ctrl *ctrl) -- cgit v1.2.3-59-g8ed1b From 530ca2c9bd6949c72c9b5cfc330cb3dbccaa3f5b Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 25 Sep 2018 10:36:20 -0600 Subject: blk-mq: Allow blocking queue tag iter callbacks A recent commit runs tag iterator callbacks under the rcu read lock, but existing callbacks do not satisfy the non-blocking requirement. The commit intended to prevent an iterator from accessing a queue that's being modified. This patch fixes the original issue by taking a queue reference instead of reading it, which allows callbacks to make blocking calls. Fixes: f5bbbbe4d6357 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter") Acked-by: Jianchao Wang Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- block/blk-mq-tag.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c index 94e1ed667b6e..41317c50a446 100644 --- a/block/blk-mq-tag.c +++ b/block/blk-mq-tag.c @@ -322,16 +322,11 @@ void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, /* * __blk_mq_update_nr_hw_queues will update the nr_hw_queues and - * queue_hw_ctx after freeze the queue. So we could use q_usage_counter - * to avoid race with it. __blk_mq_update_nr_hw_queues will users - * synchronize_rcu to ensure all of the users go out of the critical - * section below and see zeroed q_usage_counter. + * queue_hw_ctx after freeze the queue, so we use q_usage_counter + * to avoid race with it. */ - rcu_read_lock(); - if (percpu_ref_is_zero(&q->q_usage_counter)) { - rcu_read_unlock(); + if (!percpu_ref_tryget(&q->q_usage_counter)) return; - } queue_for_each_hw_ctx(q, hctx, i) { struct blk_mq_tags *tags = hctx->tags; @@ -347,7 +342,7 @@ void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, bt_for_each(hctx, &tags->breserved_tags, fn, priv, true); bt_for_each(hctx, &tags->bitmap_tags, fn, priv, false); } - rcu_read_unlock(); + blk_queue_exit(q); } static int bt_alloc(struct sbitmap_queue *bt, unsigned int depth, -- cgit v1.2.3-59-g8ed1b From 5ebb1bc2d63d90dd204169e21fd7a0b4bb8c776e Mon Sep 17 00:00:00 2001 From: Arindam Nath Date: Tue, 18 Sep 2018 15:40:58 +0530 Subject: iommu/amd: Return devid as alias for ACPI HID devices ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by: Arindam Nath Fixes: 2bf9a0a12749 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 4e04fff23977..73e47d93e7a0 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -246,7 +246,13 @@ static u16 get_alias(struct device *dev) /* The callers make sure that get_device_id() does not fail here */ devid = get_device_id(dev); + + /* For ACPI HID devices, we simply return the devid as such */ + if (!dev_is_pci(dev)) + return devid; + ivrs_alias = amd_iommu_alias_table[devid]; + pci_for_each_dma_alias(pdev, __last_alias, &pci_alias); if (ivrs_alias == pci_alias) -- cgit v1.2.3-59-g8ed1b From 337fe9f5c1e7de1f391c6a692531379d2aa2ee11 Mon Sep 17 00:00:00 2001 From: Jason Ekstrand Date: Wed, 26 Sep 2018 02:17:03 -0500 Subject: drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set We attempt to get fences earlier in the hopes that everything will already have fences and no callbacks will be needed. If we do succeed in getting a fence, getting one a second time will result in a duplicate ref with no unref. This is causing memory leaks in Vulkan applications that create a lot of fences; playing for a few hours can, apparently, bring down the system. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899 Reviewed-by: Chris Wilson Signed-off-by: Jason Ekstrand Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com --- drivers/gpu/drm/drm_syncobj.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c index adb3cb27d31e..759278fef35a 100644 --- a/drivers/gpu/drm/drm_syncobj.c +++ b/drivers/gpu/drm/drm_syncobj.c @@ -97,6 +97,8 @@ static int drm_syncobj_fence_get_or_add_callback(struct drm_syncobj *syncobj, { int ret; + WARN_ON(*fence); + *fence = drm_syncobj_fence_get(syncobj); if (*fence) return 1; @@ -743,6 +745,9 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs, if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) { for (i = 0; i < count; ++i) { + if (entries[i].fence) + continue; + drm_syncobj_fence_get_or_add_callback(syncobjs[i], &entries[i].fence, &entries[i].syncobj_cb, -- cgit v1.2.3-59-g8ed1b From f188b99f0b2d33794b4af8a225f95d1e968c0a3f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 26 Sep 2018 15:39:28 -0500 Subject: ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports themselves are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC: ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event() It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls enable_slot() directly (instead of going through acpiphp_check_bridge() as there is no bridge), which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on a few fix proposals it was tracked to crash somewhere inside pci_assign_unassigned_bridge_resources(). In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device). Fix this so that we only go to that special branch if we are calling enable_slot() for a bridge (e.g., the ACPI notification was for the bridge). Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127 Fixes: 84c8b58ed3ad ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") Reported-by: Peter Anemone Signed-off-by: Mika Westerberg Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki CC: stable@vger.kernel.org # v4.18+ --- drivers/pci/hotplug/acpiphp_glue.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index ef0b1b6ba86f..12afa7fdf77e 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -457,17 +457,18 @@ static void acpiphp_native_scan_bridge(struct pci_dev *bridge) /** * enable_slot - enable, configure a slot * @slot: slot to be enabled + * @bridge: true if enable is for the whole bridge (not a single slot) * * This function should be called per *physical slot*, * not per each slot object in ACPI namespace. */ -static void enable_slot(struct acpiphp_slot *slot) +static void enable_slot(struct acpiphp_slot *slot, bool bridge) { struct pci_dev *dev; struct pci_bus *bus = slot->bus; struct acpiphp_func *func; - if (bus->self && hotplug_is_native(bus->self)) { + if (bridge && bus->self && hotplug_is_native(bus->self)) { /* * If native hotplug is used, it will take care of hotplug * slot management and resource allocation for hotplug @@ -701,7 +702,7 @@ static void acpiphp_check_bridge(struct acpiphp_bridge *bridge) trim_stale_devices(dev); /* configure all functions */ - enable_slot(slot); + enable_slot(slot, true); } else { disable_slot(slot); } @@ -785,7 +786,7 @@ static void hotplug_event(u32 type, struct acpiphp_context *context) if (bridge) acpiphp_check_bridge(bridge); else if (!(slot->flags & SLOT_IS_GOING_AWAY)) - enable_slot(slot); + enable_slot(slot, false); break; @@ -973,7 +974,7 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot) /* configure all functions */ if (!(slot->flags & SLOT_ENABLED)) - enable_slot(slot); + enable_slot(slot, false); pci_unlock_rescan_remove(); return 0; -- cgit v1.2.3-59-g8ed1b From 854f31ccdd7964c9c2e68da234a3a8aedb51cf6b Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 27 Sep 2018 10:55:13 +0900 Subject: block: fix deadline elevator drain for zoned block devices When the deadline scheduler is used with a zoned block device, writes to a zone will be dispatched one at a time. This causes the warning message: deadline: forced dispatching is broken (nr_sorted=X), please report this to be displayed when switching to another elevator with the legacy I/O path while write requests to a zone are being retained in the scheduler queue. Prevent this message from being displayed when executing elv_drain_elevator() for a zoned block device. __blk_drain_queue() will loop until all writes are dispatched and completed, resulting in the desired elevator queue drain without extensive modifications to the deadline code itself to handle forced-dispatch calls. Signed-off-by: Damien Le Moal Fixes: 8dc8146f9c92 ("deadline-iosched: Introduce zone locking support") Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- block/elevator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/elevator.c b/block/elevator.c index 6a06b5d040e5..fae58b2f906f 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -609,7 +609,7 @@ void elv_drain_elevator(struct request_queue *q) while (e->type->ops.sq.elevator_dispatch_fn(q, 1)) ; - if (q->nr_sorted && printed++ < 10) { + if (q->nr_sorted && !blk_queue_is_zoned(q) && printed++ < 10 ) { printk(KERN_ERR "%s: forced dispatching is broken " "(nr_sorted=%u), please report this\n", q->elevator->type->elevator_name, q->nr_sorted); -- cgit v1.2.3-59-g8ed1b From 52bf4a900d9cede3eb14982d0f2c5e6db6d97cc3 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 25 Apr 2018 12:14:39 +0200 Subject: clocksource/drivers/timer-atmel-pit: Properly handle error cases The smatch utility reports a possible leak: smatch warnings: drivers/clocksource/timer-atmel-pit.c:183 at91sam926x_pit_dt_init() warn: possible memory leak of 'data' Ensure data is freed before exiting with an error. Reported-by: Dan Carpenter Signed-off-by: Alexandre Belloni Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-atmel-pit.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index ec8a4376f74f..2fab18fae4fc 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -180,26 +180,29 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node) data->base = of_iomap(node, 0); if (!data->base) { pr_err("Could not map PIT address\n"); - return -ENXIO; + ret = -ENXIO; + goto exit; } data->mck = of_clk_get(node, 0); if (IS_ERR(data->mck)) { pr_err("Unable to get mck clk\n"); - return PTR_ERR(data->mck); + ret = PTR_ERR(data->mck); + goto exit; } ret = clk_prepare_enable(data->mck); if (ret) { pr_err("Unable to enable mck\n"); - return ret; + goto exit; } /* Get the interrupts property */ data->irq = irq_of_parse_and_map(node, 0); if (!data->irq) { pr_err("Unable to get IRQ from DT\n"); - return -EINVAL; + ret = -EINVAL; + goto exit; } /* @@ -227,7 +230,7 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node) ret = clocksource_register_hz(&data->clksrc, pit_rate); if (ret) { pr_err("Failed to register clocksource\n"); - return ret; + goto exit; } /* Set up irq handler */ @@ -236,7 +239,8 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node) "at91_tick", data); if (ret) { pr_err("Unable to setup IRQ\n"); - return ret; + clocksource_unregister(&data->clksrc); + goto exit; } /* Set up and register clockevents */ @@ -254,6 +258,10 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node) clockevents_register_device(&data->clkevt); return 0; + +exit: + kfree(data); + return ret; } TIMER_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit", at91sam926x_pit_dt_init); -- cgit v1.2.3-59-g8ed1b From f151ba989d149bbdfc90e5405724bbea094f9b17 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Sat, 22 Sep 2018 15:55:49 -0400 Subject: xen/blkfront: When purging persistent grants, keep them in the buffer Commit a46b53672b2c ("xen/blkfront: cleanup stale persistent grants") added support for purging persistent grants when they are not in use. As part of the purge, the grants were removed from the grant buffer, This eventually causes the buffer to become empty, with BUG_ON triggered in get_free_grant(). This can be observed even on an idle system, within 20-30 minutes. We should keep the grants in the buffer when purging, and only free the grant ref. Fixes: a46b53672b2c ("xen/blkfront: cleanup stale persistent grants") Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index a71d817e900d..3b441fe69c0d 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2667,11 +2667,9 @@ static void purge_persistent_grants(struct blkfront_info *info) gnttab_query_foreign_access(gnt_list_entry->gref)) continue; - list_del(&gnt_list_entry->node); gnttab_end_foreign_access(gnt_list_entry->gref, 0, 0UL); + gnt_list_entry->gref = GRANT_INVALID_REF; rinfo->persistent_gnts_c--; - __free_page(gnt_list_entry->page); - kfree(gnt_list_entry); } spin_unlock_irqrestore(&rinfo->ring_lock, flags); -- cgit v1.2.3-59-g8ed1b From d6a77ba0eb92d8ffa4b05a442fc20d0a9b11c4c4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 27 Sep 2018 14:41:30 +0200 Subject: Revert "drm/panel: Add device_link from panel device to DRM device" This reverts commit 0c08754b59da5557532d946599854e6df28edc22. commit 0c08754b59da ("drm/panel: Add device_link from panel device to DRM device") creates a circular dependency under these circumstances: 1. The panel depends on dsi-host because it is MIPI-DSI child device. 2. dsi-host depends on the drm parent device (connector->dev->dev) this should be allowed. 3. drm parent dev (connector->dev->dev) depends on the panel after this patch. This makes the dependency circular and while it appears it does not affect any in-tree drivers (they do not seem to have dsi hosts depending on the same parent device) this does not seem right. As noted in a response from Andrzej Hajda, the intent is likely to make the panel dependent on the DRM device (connector->dev) not its parent. But we have no way of doing that since the DRM device doesn't contain any struct device on its own (arguably it should). Revert this until a proper approach is figured out. Cc: Jyri Sarha Cc: Eric Anholt Cc: Andrzej Hajda Signed-off-by: Linus Walleij Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org --- drivers/gpu/drm/drm_panel.c | 10 ---------- include/drm/drm_panel.h | 1 - 2 files changed, 11 deletions(-) diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c index b902361dee6e..1d9a9d2fe0e0 100644 --- a/drivers/gpu/drm/drm_panel.c +++ b/drivers/gpu/drm/drm_panel.c @@ -24,7 +24,6 @@ #include #include -#include #include #include @@ -105,13 +104,6 @@ int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector) if (panel->connector) return -EBUSY; - panel->link = device_link_add(connector->dev->dev, panel->dev, 0); - if (!panel->link) { - dev_err(panel->dev, "failed to link panel to %s\n", - dev_name(connector->dev->dev)); - return -EINVAL; - } - panel->connector = connector; panel->drm = connector->dev; @@ -133,8 +125,6 @@ EXPORT_SYMBOL(drm_panel_attach); */ int drm_panel_detach(struct drm_panel *panel) { - device_link_del(panel->link); - panel->connector = NULL; panel->drm = NULL; diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 582a0ec0aa70..777814755fa6 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -89,7 +89,6 @@ struct drm_panel { struct drm_device *drm; struct drm_connector *connector; struct device *dev; - struct device_link *link; const struct drm_panel_funcs *funcs; -- cgit v1.2.3-59-g8ed1b From 61ea6f5831974ebd1a57baffd7cc30600a2e26fc Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 27 Sep 2018 20:48:39 +0800 Subject: drm/amdgpu: Fix vce work queue was not cancelled when suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The vce cancel_delayed_work_sync never be called. driver call the function in error path. This caused the A+A suspend hang when runtime pm enebled. As we will visit the smu in the idle queue. this will cause smu hang because the dgpu has been suspend, and the dgpu also will be waked up. As the smu has been hang, so the dgpu resume will failed. Reviewed-by: Christian König Reviewed-by: Feifei Xu Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c | 3 ++- drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c index 0cc5190f4f36..5f3f54073818 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c @@ -258,6 +258,8 @@ int amdgpu_vce_suspend(struct amdgpu_device *adev) { int i; + cancel_delayed_work_sync(&adev->vce.idle_work); + if (adev->vce.vcpu_bo == NULL) return 0; @@ -268,7 +270,6 @@ int amdgpu_vce_suspend(struct amdgpu_device *adev) if (i == AMDGPU_MAX_VCE_HANDLES) return 0; - cancel_delayed_work_sync(&adev->vce.idle_work); /* TODO: suspending running encoding sessions isn't supported */ return -EINVAL; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c index fd654a4406db..400fc74bbae2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c @@ -153,11 +153,11 @@ int amdgpu_vcn_suspend(struct amdgpu_device *adev) unsigned size; void *ptr; + cancel_delayed_work_sync(&adev->vcn.idle_work); + if (adev->vcn.vcpu_bo == NULL) return 0; - cancel_delayed_work_sync(&adev->vcn.idle_work); - size = amdgpu_bo_size(adev->vcn.vcpu_bo); ptr = adev->vcn.cpu_addr; -- cgit v1.2.3-59-g8ed1b From 599760d6d0abbab71f9726b49858d2ec45e74c0a Mon Sep 17 00:00:00 2001 From: Roman Li Date: Wed, 26 Sep 2018 13:42:16 -0400 Subject: drm/amd/display: Fix Vega10 lightup on S3 resume [Why] There have been a few reports of Vega10 display remaining blank after S3 resume. The regression is caused by workaround for mode change on Vega10 - skip set_bandwidth if stream count is 0. As a result we skipped dispclk reset on suspend, thus on resume we may skip the clock update assuming it hasn't been changed. On some systems it causes display blank or 'out of range'. [How] Revert "drm/amd/display: Fix Vega10 black screen after mode change" Verified that it hadn't cause mode change regression. Signed-off-by: Roman Li Reviewed-by: Sun peng Li Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 2 +- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h | 5 ----- drivers/gpu/drm/amd/display/dc/dce120/dce120_hw_sequencer.c | 12 ------------ 3 files changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index 14384d9675a8..b2f308766a9e 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -2560,7 +2560,7 @@ static void pplib_apply_display_requirements( dc->prev_display_config = *pp_display_cfg; } -void dce110_set_bandwidth( +static void dce110_set_bandwidth( struct dc *dc, struct dc_state *context, bool decrease_allowed) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h index e4c5db75c4c6..d6db3dbd9015 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.h @@ -68,11 +68,6 @@ void dce110_fill_display_configs( const struct dc_state *context, struct dm_pp_display_configuration *pp_display_cfg); -void dce110_set_bandwidth( - struct dc *dc, - struct dc_state *context, - bool decrease_allowed); - uint32_t dce110_get_min_vblank_time_us(const struct dc_state *context); void dp_receiver_power_ctrl(struct dc_link *link, bool on); diff --git a/drivers/gpu/drm/amd/display/dc/dce120/dce120_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce120/dce120_hw_sequencer.c index 5853522a6182..eb0f5f9a973b 100644 --- a/drivers/gpu/drm/amd/display/dc/dce120/dce120_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce120/dce120_hw_sequencer.c @@ -244,17 +244,6 @@ static void dce120_update_dchub( dh_data->dchub_info_valid = false; } -static void dce120_set_bandwidth( - struct dc *dc, - struct dc_state *context, - bool decrease_allowed) -{ - if (context->stream_count <= 0) - return; - - dce110_set_bandwidth(dc, context, decrease_allowed); -} - void dce120_hw_sequencer_construct(struct dc *dc) { /* All registers used by dce11.2 match those in dce11 in offset and @@ -263,6 +252,5 @@ void dce120_hw_sequencer_construct(struct dc *dc) dce110_hw_sequencer_construct(dc); dc->hwss.enable_display_power_gating = dce120_enable_display_power_gating; dc->hwss.update_dchub = dce120_update_dchub; - dc->hwss.set_bandwidth = dce120_set_bandwidth; } -- cgit v1.2.3-59-g8ed1b From fbbdadf2faf17cd88e9c447701495540377c5743 Mon Sep 17 00:00:00 2001 From: Bhawanpreet Lakha Date: Wed, 26 Sep 2018 13:42:10 -0400 Subject: drm/amd/display: Fix Edid emulation for linux [Why] EDID emulation didn't work properly for linux, as we stop programming if nothing is connected physically. [How] We get a flag from DRM when we want to do edid emulation. We check if this flag is true and nothing is connected physically, if so we only program the front end using VIRTUAL_SIGNAL. Signed-off-by: Bhawanpreet Lakha Reviewed-by: Harry Wentland Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 139 +++++++++++++++++++++- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 +- drivers/gpu/drm/amd/display/dc/dc_link.h | 1 + 3 files changed, 137 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 800f481a6995..96875950845a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -641,6 +641,87 @@ amdgpu_dm_find_first_crtc_matching_connector(struct drm_atomic_state *state, return NULL; } +static void emulated_link_detect(struct dc_link *link) +{ + struct dc_sink_init_data sink_init_data = { 0 }; + struct display_sink_capability sink_caps = { 0 }; + enum dc_edid_status edid_status; + struct dc_context *dc_ctx = link->ctx; + struct dc_sink *sink = NULL; + struct dc_sink *prev_sink = NULL; + + link->type = dc_connection_none; + prev_sink = link->local_sink; + + if (prev_sink != NULL) + dc_sink_retain(prev_sink); + + switch (link->connector_signal) { + case SIGNAL_TYPE_HDMI_TYPE_A: { + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; + sink_caps.signal = SIGNAL_TYPE_HDMI_TYPE_A; + break; + } + + case SIGNAL_TYPE_DVI_SINGLE_LINK: { + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; + sink_caps.signal = SIGNAL_TYPE_DVI_SINGLE_LINK; + break; + } + + case SIGNAL_TYPE_DVI_DUAL_LINK: { + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; + sink_caps.signal = SIGNAL_TYPE_DVI_DUAL_LINK; + break; + } + + case SIGNAL_TYPE_LVDS: { + sink_caps.transaction_type = DDC_TRANSACTION_TYPE_I2C; + sink_caps.signal = SIGNAL_TYPE_LVDS; + break; + } + + case SIGNAL_TYPE_EDP: { + sink_caps.transaction_type = + DDC_TRANSACTION_TYPE_I2C_OVER_AUX; + sink_caps.signal = SIGNAL_TYPE_EDP; + break; + } + + case SIGNAL_TYPE_DISPLAY_PORT: { + sink_caps.transaction_type = + DDC_TRANSACTION_TYPE_I2C_OVER_AUX; + sink_caps.signal = SIGNAL_TYPE_VIRTUAL; + break; + } + + default: + DC_ERROR("Invalid connector type! signal:%d\n", + link->connector_signal); + return; + } + + sink_init_data.link = link; + sink_init_data.sink_signal = sink_caps.signal; + + sink = dc_sink_create(&sink_init_data); + if (!sink) { + DC_ERROR("Failed to create sink!\n"); + return; + } + + link->local_sink = sink; + + edid_status = dm_helpers_read_local_edid( + link->ctx, + link, + sink); + + if (edid_status != EDID_OK) + DC_ERROR("Failed to read EDID"); + +} + static int dm_resume(void *handle) { struct amdgpu_device *adev = handle; @@ -654,6 +735,7 @@ static int dm_resume(void *handle) struct drm_plane *plane; struct drm_plane_state *new_plane_state; struct dm_plane_state *dm_new_plane_state; + enum dc_connection_type new_connection_type = dc_connection_none; int ret; int i; @@ -684,7 +766,13 @@ static int dm_resume(void *handle) continue; mutex_lock(&aconnector->hpd_lock); - dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD); + if (!dc_link_detect_sink(aconnector->dc_link, &new_connection_type)) + DRM_ERROR("KMS: Failed to detect connector\n"); + + if (aconnector->base.force && new_connection_type == dc_connection_none) + emulated_link_detect(aconnector->dc_link); + else + dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD); if (aconnector->fake_enable && aconnector->dc_link->local_sink) aconnector->fake_enable = false; @@ -922,6 +1010,7 @@ static void handle_hpd_irq(void *param) struct amdgpu_dm_connector *aconnector = (struct amdgpu_dm_connector *)param; struct drm_connector *connector = &aconnector->base; struct drm_device *dev = connector->dev; + enum dc_connection_type new_connection_type = dc_connection_none; /* In case of failure or MST no need to update connector status or notify the OS * since (for MST case) MST does this in it's own context. @@ -931,7 +1020,21 @@ static void handle_hpd_irq(void *param) if (aconnector->fake_enable) aconnector->fake_enable = false; - if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) { + if (!dc_link_detect_sink(aconnector->dc_link, &new_connection_type)) + DRM_ERROR("KMS: Failed to detect connector\n"); + + if (aconnector->base.force && new_connection_type == dc_connection_none) { + emulated_link_detect(aconnector->dc_link); + + + drm_modeset_lock_all(dev); + dm_restore_drm_connector_state(dev, connector); + drm_modeset_unlock_all(dev); + + if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) + drm_kms_helper_hotplug_event(dev); + + } else if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) { amdgpu_dm_update_connector_after_detect(aconnector); @@ -1031,6 +1134,7 @@ static void handle_hpd_rx_irq(void *param) struct drm_device *dev = connector->dev; struct dc_link *dc_link = aconnector->dc_link; bool is_mst_root_connector = aconnector->mst_mgr.mst_state; + enum dc_connection_type new_connection_type = dc_connection_none; /* TODO:Temporary add mutex to protect hpd interrupt not have a gpio * conflict, after implement i2c helper, this mutex should be @@ -1042,7 +1146,24 @@ static void handle_hpd_rx_irq(void *param) if (dc_link_handle_hpd_rx_irq(dc_link, NULL, NULL) && !is_mst_root_connector) { /* Downstream Port status changed. */ - if (dc_link_detect(dc_link, DETECT_REASON_HPDRX)) { + if (!dc_link_detect_sink(dc_link, &new_connection_type)) + DRM_ERROR("KMS: Failed to detect connector\n"); + + if (aconnector->base.force && new_connection_type == dc_connection_none) { + emulated_link_detect(dc_link); + + if (aconnector->fake_enable) + aconnector->fake_enable = false; + + amdgpu_dm_update_connector_after_detect(aconnector); + + + drm_modeset_lock_all(dev); + dm_restore_drm_connector_state(dev, connector); + drm_modeset_unlock_all(dev); + + drm_kms_helper_hotplug_event(dev); + } else if (dc_link_detect(dc_link, DETECT_REASON_HPDRX)) { if (aconnector->fake_enable) aconnector->fake_enable = false; @@ -1433,6 +1554,7 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) struct amdgpu_mode_info *mode_info = &adev->mode_info; uint32_t link_cnt; int32_t total_overlay_planes, total_primary_planes; + enum dc_connection_type new_connection_type = dc_connection_none; link_cnt = dm->dc->caps.max_links; if (amdgpu_dm_mode_config_init(dm->adev)) { @@ -1499,7 +1621,14 @@ static int amdgpu_dm_initialize_drm_device(struct amdgpu_device *adev) link = dc_get_link_at_index(dm->dc, i); - if (dc_link_detect(link, DETECT_REASON_BOOT)) { + if (!dc_link_detect_sink(link, &new_connection_type)) + DRM_ERROR("KMS: Failed to detect connector\n"); + + if (aconnector->base.force && new_connection_type == dc_connection_none) { + emulated_link_detect(link); + amdgpu_dm_update_connector_after_detect(aconnector); + + } else if (dc_link_detect(link, DETECT_REASON_BOOT)) { amdgpu_dm_update_connector_after_detect(aconnector); register_backlight_device(dm, link); } @@ -2494,7 +2623,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, if (dm_state && dm_state->freesync_capable) stream->ignore_msa_timing_param = true; finish: - if (sink && sink->sink_signal == SIGNAL_TYPE_VIRTUAL) + if (sink && sink->sink_signal == SIGNAL_TYPE_VIRTUAL && aconnector->base.force != DRM_FORCE_ON) dc_sink_release(sink); return stream; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c index 37eaf72ace54..fced3c1c2ef5 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c @@ -195,7 +195,7 @@ static bool program_hpd_filter( return result; } -static bool detect_sink(struct dc_link *link, enum dc_connection_type *type) +bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type) { uint32_t is_hpd_high = 0; struct gpio *hpd_pin; @@ -604,7 +604,7 @@ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason) if (link->connector_signal == SIGNAL_TYPE_VIRTUAL) return false; - if (false == detect_sink(link, &new_connection_type)) { + if (false == dc_link_detect_sink(link, &new_connection_type)) { BREAK_TO_DEBUGGER(); return false; } diff --git a/drivers/gpu/drm/amd/display/dc/dc_link.h b/drivers/gpu/drm/amd/display/dc/dc_link.h index d43cefbc43d3..1b48ab9aea89 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_link.h +++ b/drivers/gpu/drm/amd/display/dc/dc_link.h @@ -215,6 +215,7 @@ void dc_link_enable_hpd_filter(struct dc_link *link, bool enable); bool dc_link_is_dp_sink_present(struct dc_link *link); +bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type); /* * DPCD access interfaces */ -- cgit v1.2.3-59-g8ed1b From 0f843e65d9eef4936929bb036c5f771fb261eea4 Mon Sep 17 00:00:00 2001 From: Guoju Fang Date: Thu, 27 Sep 2018 23:41:46 +0800 Subject: bcache: add separate workqueue for journal_write to avoid deadlock After write SSD completed, bcache schedules journal_write work to system_wq, which is a public workqueue in system, without WQ_MEM_RECLAIM flag. system_wq is also a bound wq, and there may be no idle kworker on current processor. Creating a new kworker may unfortunately need to reclaim memory first, by shrinking cache and slab used by vfs, which depends on bcache device. That's a deadlock. This patch create a new workqueue for journal_write with WQ_MEM_RECLAIM flag. It's rescuer thread will work to avoid the deadlock. Signed-off-by: Guoju Fang Cc: stable@vger.kernel.org Signed-off-by: Coly Li Signed-off-by: Jens Axboe --- drivers/md/bcache/bcache.h | 1 + drivers/md/bcache/journal.c | 6 +++--- drivers/md/bcache/super.c | 8 ++++++++ 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index 83504dd8100a..954dad29e6e8 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -965,6 +965,7 @@ void bch_prio_write(struct cache *ca); void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent); extern struct workqueue_struct *bcache_wq; +extern struct workqueue_struct *bch_journal_wq; extern struct mutex bch_register_lock; extern struct list_head bch_cache_sets; diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c index 6116bbf870d8..522c7426f3a0 100644 --- a/drivers/md/bcache/journal.c +++ b/drivers/md/bcache/journal.c @@ -485,7 +485,7 @@ static void do_journal_discard(struct cache *ca) closure_get(&ca->set->cl); INIT_WORK(&ja->discard_work, journal_discard_work); - schedule_work(&ja->discard_work); + queue_work(bch_journal_wq, &ja->discard_work); } } @@ -592,7 +592,7 @@ static void journal_write_done(struct closure *cl) : &j->w[0]; __closure_wake_up(&w->wait); - continue_at_nobarrier(cl, journal_write, system_wq); + continue_at_nobarrier(cl, journal_write, bch_journal_wq); } static void journal_write_unlock(struct closure *cl) @@ -627,7 +627,7 @@ static void journal_write_unlocked(struct closure *cl) spin_unlock(&c->journal.lock); btree_flush_write(c); - continue_at(cl, journal_write, system_wq); + continue_at(cl, journal_write, bch_journal_wq); return; } diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 94c756c66bd7..30ba9aeb5ee8 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -47,6 +47,7 @@ static int bcache_major; static DEFINE_IDA(bcache_device_idx); static wait_queue_head_t unregister_wait; struct workqueue_struct *bcache_wq; +struct workqueue_struct *bch_journal_wq; #define BTREE_MAX_PAGES (256 * 1024 / PAGE_SIZE) /* limitation of partitions number on single bcache device */ @@ -2341,6 +2342,9 @@ static void bcache_exit(void) kobject_put(bcache_kobj); if (bcache_wq) destroy_workqueue(bcache_wq); + if (bch_journal_wq) + destroy_workqueue(bch_journal_wq); + if (bcache_major) unregister_blkdev(bcache_major, "bcache"); unregister_reboot_notifier(&reboot); @@ -2370,6 +2374,10 @@ static int __init bcache_init(void) if (!bcache_wq) goto err; + bch_journal_wq = alloc_workqueue("bch_journal", WQ_MEM_RECLAIM, 0); + if (!bch_journal_wq) + goto err; + bcache_kobj = kobject_create_and_add("bcache", fs_kobj); if (!bcache_kobj) goto err; -- cgit v1.2.3-59-g8ed1b From bdec8d7fa55e6f5314ed72e5a0b435d90ff90548 Mon Sep 17 00:00:00 2001 From: Kairui Song Date: Thu, 27 Sep 2018 20:38:45 +0800 Subject: x86/boot: Fix kexec booting failure in the SEV bit detection code Commit 1958b5fc4010 ("x86/boot: Add early boot support when running with SEV active") can occasionally cause system resets when kexec-ing a second kernel even if SEV is not active. That's because get_sev_encryption_bit() uses 32-bit rIP-relative addressing to read the value of enc_bit - a variable which caches a previously detected encryption bit position - but kexec may allocate the early boot code to a higher location, beyond the 32-bit addressing limit. In this case, garbage will be read and get_sev_encryption_bit() will return the wrong value, leading to accessing memory with the wrong encryption setting. Therefore, remove enc_bit, and thus get rid of the need to do 32-bit rIP-relative addressing in the first place. [ bp: massage commit message heavily. ] Fixes: 1958b5fc4010 ("x86/boot: Add early boot support when running with SEV active") Suggested-by: Borislav Petkov Signed-off-by: Kairui Song Signed-off-by: Borislav Petkov Reviewed-by: Tom Lendacky Cc: linux-kernel@vger.kernel.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: brijesh.singh@amd.com Cc: kexec@lists.infradead.org Cc: dyoung@redhat.com Cc: bhe@redhat.com Cc: ghook@redhat.com Link: https://lkml.kernel.org/r/20180927123845.32052-1-kasong@redhat.com --- arch/x86/boot/compressed/mem_encrypt.S | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S index eaa843a52907..a480356e0ed8 100644 --- a/arch/x86/boot/compressed/mem_encrypt.S +++ b/arch/x86/boot/compressed/mem_encrypt.S @@ -25,20 +25,6 @@ ENTRY(get_sev_encryption_bit) push %ebx push %ecx push %edx - push %edi - - /* - * RIP-relative addressing is needed to access the encryption bit - * variable. Since we are running in 32-bit mode we need this call/pop - * sequence to get the proper relative addressing. - */ - call 1f -1: popl %edi - subl $1b, %edi - - movl enc_bit(%edi), %eax - cmpl $0, %eax - jge .Lsev_exit /* Check if running under a hypervisor */ movl $1, %eax @@ -69,15 +55,12 @@ ENTRY(get_sev_encryption_bit) movl %ebx, %eax andl $0x3f, %eax /* Return the encryption bit location */ - movl %eax, enc_bit(%edi) jmp .Lsev_exit .Lno_sev: xor %eax, %eax - movl %eax, enc_bit(%edi) .Lsev_exit: - pop %edi pop %edx pop %ecx pop %ebx @@ -113,8 +96,6 @@ ENTRY(set_sev_encryption_mask) ENDPROC(set_sev_encryption_mask) .data -enc_bit: - .int 0xffffffff #ifdef CONFIG_AMD_MEM_ENCRYPT .balign 8 -- cgit v1.2.3-59-g8ed1b From f52afc93cd018fe6910133a05d44671192d1aeb0 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 27 Sep 2018 13:23:32 +0200 Subject: dax: Fix deadlock in dax_lock_mapping_entry() When dax_lock_mapping_entry() has to sleep to obtain entry lock, it will fail to unlock mapping->i_pages spinlock and thus immediately deadlock against itself when retrying to grab the entry lock again. Fix the problem by unlocking mapping->i_pages before retrying. Fixes: c2a7d2a11552 ("filesystem-dax: Introduce dax_lock_mapping_entry()") Reported-by: Barret Rhoden Signed-off-by: Jan Kara Signed-off-by: Dan Williams --- fs/dax.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/dax.c b/fs/dax.c index f32d7125ad0f..e4ef8af31aa6 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -447,6 +447,7 @@ bool dax_lock_mapping_entry(struct page *page) xa_unlock_irq(&mapping->i_pages); break; } else if (IS_ERR(entry)) { + xa_unlock_irq(&mapping->i_pages); WARN_ON_ONCE(PTR_ERR(entry) != -EAGAIN); continue; } -- cgit v1.2.3-59-g8ed1b From 587562d0c7cd6861f4f90a2eb811cccb1a376f5f Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Wed, 26 Sep 2018 14:35:50 +0200 Subject: blk-mq: I/O and timer unplugs are inverted in blktrace trace_block_unplug() takes true for explicit unplugs and false for implicit unplugs. schedule() unplugs are implicit and should be reported as timer unplugs. While correct in the legacy code, this has been inverted in blk-mq since 4.11. Cc: stable@vger.kernel.org Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Reviewed-by: Omar Sandoval Signed-off-by: Ilya Dryomov Signed-off-by: Jens Axboe --- block/blk-mq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 85a1c1a59c72..e3c39ea8e17b 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1628,7 +1628,7 @@ void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule) BUG_ON(!rq->q); if (rq->mq_ctx != this_ctx) { if (this_ctx) { - trace_block_unplug(this_q, depth, from_schedule); + trace_block_unplug(this_q, depth, !from_schedule); blk_mq_sched_insert_requests(this_q, this_ctx, &ctx_list, from_schedule); @@ -1648,7 +1648,7 @@ void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule) * on 'ctx_list'. Do those. */ if (this_ctx) { - trace_block_unplug(this_q, depth, from_schedule); + trace_block_unplug(this_q, depth, !from_schedule); blk_mq_sched_insert_requests(this_q, this_ctx, &ctx_list, from_schedule); } -- cgit v1.2.3-59-g8ed1b From 7e0cf1c983b5b24426d130fd949a055d520acc9a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 28 Sep 2018 14:53:18 +1000 Subject: selftests/powerpc: Fix Makefiles for headers_install change Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") introduced a requirement that Makefiles more than one level below the selftests directory need to define top_srcdir, but it didn't update any of the powerpc Makefiles. This broke building all the powerpc selftests with eg: make[1]: Entering directory '/src/linux/tools/testing/selftests/powerpc' BUILD_TARGET=/src/linux/tools/testing/selftests/powerpc/alignment; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C alignment all make[2]: Entering directory '/src/linux/tools/testing/selftests/powerpc/alignment' ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make[2]: *** No rule to make target '../../../../scripts/subarch.include'. make[2]: Failed to remake makefile '../../../../scripts/subarch.include'. Makefile:38: recipe for target 'alignment' failed Fix it by setting top_srcdir in the affected Makefiles. Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk") Signed-off-by: Michael Ellerman --- tools/testing/selftests/powerpc/alignment/Makefile | 1 + tools/testing/selftests/powerpc/benchmarks/Makefile | 1 + tools/testing/selftests/powerpc/cache_shape/Makefile | 1 + tools/testing/selftests/powerpc/copyloops/Makefile | 1 + tools/testing/selftests/powerpc/dscr/Makefile | 1 + tools/testing/selftests/powerpc/math/Makefile | 1 + tools/testing/selftests/powerpc/mm/Makefile | 1 + tools/testing/selftests/powerpc/pmu/Makefile | 1 + tools/testing/selftests/powerpc/pmu/ebb/Makefile | 1 + tools/testing/selftests/powerpc/primitives/Makefile | 1 + tools/testing/selftests/powerpc/ptrace/Makefile | 1 + tools/testing/selftests/powerpc/signal/Makefile | 1 + tools/testing/selftests/powerpc/stringloops/Makefile | 1 + tools/testing/selftests/powerpc/switch_endian/Makefile | 1 + tools/testing/selftests/powerpc/syscalls/Makefile | 1 + tools/testing/selftests/powerpc/tm/Makefile | 1 + tools/testing/selftests/powerpc/vphn/Makefile | 1 + 17 files changed, 17 insertions(+) diff --git a/tools/testing/selftests/powerpc/alignment/Makefile b/tools/testing/selftests/powerpc/alignment/Makefile index 93baacab7693..d056486f49de 100644 --- a/tools/testing/selftests/powerpc/alignment/Makefile +++ b/tools/testing/selftests/powerpc/alignment/Makefile @@ -1,5 +1,6 @@ TEST_GEN_PROGS := copy_first_unaligned alignment_handler +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c ../utils.c diff --git a/tools/testing/selftests/powerpc/benchmarks/Makefile b/tools/testing/selftests/powerpc/benchmarks/Makefile index b4d7432a0ecd..d40300a65b42 100644 --- a/tools/testing/selftests/powerpc/benchmarks/Makefile +++ b/tools/testing/selftests/powerpc/benchmarks/Makefile @@ -4,6 +4,7 @@ TEST_GEN_FILES := exec_target CFLAGS += -O2 +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c diff --git a/tools/testing/selftests/powerpc/cache_shape/Makefile b/tools/testing/selftests/powerpc/cache_shape/Makefile index 1be547434a49..ede4d3dae750 100644 --- a/tools/testing/selftests/powerpc/cache_shape/Makefile +++ b/tools/testing/selftests/powerpc/cache_shape/Makefile @@ -5,6 +5,7 @@ all: $(TEST_PROGS) $(TEST_PROGS): ../harness.c ../utils.c +top_srcdir = ../../../../.. include ../../lib.mk clean: diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile index 1cf89a34d97c..44574f3818b3 100644 --- a/tools/testing/selftests/powerpc/copyloops/Makefile +++ b/tools/testing/selftests/powerpc/copyloops/Makefile @@ -17,6 +17,7 @@ TEST_GEN_PROGS := copyuser_64_t0 copyuser_64_t1 copyuser_64_t2 \ EXTRA_SOURCES := validate.c ../harness.c stubs.S +top_srcdir = ../../../../.. include ../../lib.mk $(OUTPUT)/copyuser_64_t%: copyuser_64.S $(EXTRA_SOURCES) diff --git a/tools/testing/selftests/powerpc/dscr/Makefile b/tools/testing/selftests/powerpc/dscr/Makefile index 55d7db7a616b..5df476364b4d 100644 --- a/tools/testing/selftests/powerpc/dscr/Makefile +++ b/tools/testing/selftests/powerpc/dscr/Makefile @@ -3,6 +3,7 @@ TEST_GEN_PROGS := dscr_default_test dscr_explicit_test dscr_user_test \ dscr_inherit_test dscr_inherit_exec_test dscr_sysfs_test \ dscr_sysfs_thread_test +top_srcdir = ../../../../.. include ../../lib.mk $(OUTPUT)/dscr_default_test: LDLIBS += -lpthread diff --git a/tools/testing/selftests/powerpc/math/Makefile b/tools/testing/selftests/powerpc/math/Makefile index 0dd3a01fdab9..11a10d7a2bbd 100644 --- a/tools/testing/selftests/powerpc/math/Makefile +++ b/tools/testing/selftests/powerpc/math/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 TEST_GEN_PROGS := fpu_syscall fpu_preempt fpu_signal vmx_syscall vmx_preempt vmx_signal vsx_preempt +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile index 8ebbe96d80a8..33ced6e0ad25 100644 --- a/tools/testing/selftests/powerpc/mm/Makefile +++ b/tools/testing/selftests/powerpc/mm/Makefile @@ -5,6 +5,7 @@ noarg: TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors TEST_GEN_FILES := tempfile +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index 6e1629bf5b09..19046db995fe 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -5,6 +5,7 @@ noarg: TEST_GEN_PROGS := count_instructions l3_bank_test per_event_excludes EXTRA_SOURCES := ../harness.c event.c lib.c ../utils.c +top_srcdir = ../../../../.. include ../../lib.mk all: $(TEST_GEN_PROGS) ebb diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile index c4e64bc2e265..bd5dfa509272 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile +++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile @@ -17,6 +17,7 @@ TEST_GEN_PROGS := reg_access_test event_attributes_test cycles_test \ lost_exception_test no_handler_test \ cycles_with_mmcr2_test +top_srcdir = ../../../../../.. include ../../../lib.mk $(TEST_GEN_PROGS): ../../harness.c ../../utils.c ../event.c ../lib.c \ diff --git a/tools/testing/selftests/powerpc/primitives/Makefile b/tools/testing/selftests/powerpc/primitives/Makefile index 175366db7be8..ea2b7bd09e36 100644 --- a/tools/testing/selftests/powerpc/primitives/Makefile +++ b/tools/testing/selftests/powerpc/primitives/Makefile @@ -2,6 +2,7 @@ CFLAGS += -I$(CURDIR) TEST_GEN_PROGS := load_unaligned_zeropad +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c diff --git a/tools/testing/selftests/powerpc/ptrace/Makefile b/tools/testing/selftests/powerpc/ptrace/Makefile index 28f5b781a553..923d531265f8 100644 --- a/tools/testing/selftests/powerpc/ptrace/Makefile +++ b/tools/testing/selftests/powerpc/ptrace/Makefile @@ -4,6 +4,7 @@ TEST_PROGS := ptrace-gpr ptrace-tm-gpr ptrace-tm-spd-gpr \ ptrace-tm-spd-vsx ptrace-tm-spr ptrace-hwbreak ptrace-pkey core-pkey \ perf-hwbreak +top_srcdir = ../../../../.. include ../../lib.mk all: $(TEST_PROGS) diff --git a/tools/testing/selftests/powerpc/signal/Makefile b/tools/testing/selftests/powerpc/signal/Makefile index a7cbd5082e27..1fca25c6ace0 100644 --- a/tools/testing/selftests/powerpc/signal/Makefile +++ b/tools/testing/selftests/powerpc/signal/Makefile @@ -8,6 +8,7 @@ $(TEST_PROGS): ../harness.c ../utils.c signal.S CFLAGS += -maltivec signal_tm: CFLAGS += -mhtm +top_srcdir = ../../../../.. include ../../lib.mk clean: diff --git a/tools/testing/selftests/powerpc/stringloops/Makefile b/tools/testing/selftests/powerpc/stringloops/Makefile index 10b35c87a4f4..7fc0623d85c3 100644 --- a/tools/testing/selftests/powerpc/stringloops/Makefile +++ b/tools/testing/selftests/powerpc/stringloops/Makefile @@ -29,6 +29,7 @@ endif ASFLAGS = $(CFLAGS) +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): $(EXTRA_SOURCES) diff --git a/tools/testing/selftests/powerpc/switch_endian/Makefile b/tools/testing/selftests/powerpc/switch_endian/Makefile index 30b8ff8fb82e..fcd2dcb8972b 100644 --- a/tools/testing/selftests/powerpc/switch_endian/Makefile +++ b/tools/testing/selftests/powerpc/switch_endian/Makefile @@ -5,6 +5,7 @@ ASFLAGS += -O2 -Wall -g -nostdlib -m64 EXTRA_CLEAN = $(OUTPUT)/*.o $(OUTPUT)/check-reversed.S +top_srcdir = ../../../../.. include ../../lib.mk $(OUTPUT)/switch_endian_test: $(OUTPUT)/check-reversed.S diff --git a/tools/testing/selftests/powerpc/syscalls/Makefile b/tools/testing/selftests/powerpc/syscalls/Makefile index da22ca7c38c1..161b8846336f 100644 --- a/tools/testing/selftests/powerpc/syscalls/Makefile +++ b/tools/testing/selftests/powerpc/syscalls/Makefile @@ -2,6 +2,7 @@ TEST_GEN_PROGS := ipc_unmuxed CFLAGS += -I../../../../../usr/include +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile index c0e45d2dde25..9fc2cf6fbc92 100644 --- a/tools/testing/selftests/powerpc/tm/Makefile +++ b/tools/testing/selftests/powerpc/tm/Makefile @@ -6,6 +6,7 @@ TEST_GEN_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack tm-vmxcopy tm-fork tm-tar tm-tmspr tm-vmx-unavail tm-unavailable tm-trap \ $(SIGNAL_CONTEXT_CHK_TESTS) tm-sigreturn +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c ../utils.c diff --git a/tools/testing/selftests/powerpc/vphn/Makefile b/tools/testing/selftests/powerpc/vphn/Makefile index f8ced26748f8..fb82068c9fda 100644 --- a/tools/testing/selftests/powerpc/vphn/Makefile +++ b/tools/testing/selftests/powerpc/vphn/Makefile @@ -2,6 +2,7 @@ TEST_GEN_PROGS := test-vphn CFLAGS += -m64 +top_srcdir = ../../../../.. include ../../lib.mk $(TEST_GEN_PROGS): ../harness.c -- cgit v1.2.3-59-g8ed1b From 15c206887603a452f13fbfde2db0f8830d37028c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 28 Sep 2018 09:40:17 -0600 Subject: Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" Fix didn't work for all cases, reverting to add a (hopefully) better fix. This reverts commit f151ba989d149bbdfc90e5405724bbea094f9b17. Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 3b441fe69c0d..a71d817e900d 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2667,9 +2667,11 @@ static void purge_persistent_grants(struct blkfront_info *info) gnttab_query_foreign_access(gnt_list_entry->gref)) continue; + list_del(&gnt_list_entry->node); gnttab_end_foreign_access(gnt_list_entry->gref, 0, 0UL); - gnt_list_entry->gref = GRANT_INVALID_REF; rinfo->persistent_gnts_c--; + __free_page(gnt_list_entry->page); + kfree(gnt_list_entry); } spin_unlock_irqrestore(&rinfo->ring_lock, flags); -- cgit v1.2.3-59-g8ed1b From 6c7678674014b4552caf0e5aa0ca34078a377482 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 28 Sep 2018 09:28:27 +0200 Subject: xen/blkfront: correct purging of persistent grants Commit a46b53672b2c2e3770b38a4abf90d16364d2584b ("xen/blkfront: cleanup stale persistent grants") introduced a regression as purged persistent grants were not pu into the list of free grants again. Correct that. Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index a71d817e900d..429d20131c7e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2670,8 +2670,8 @@ static void purge_persistent_grants(struct blkfront_info *info) list_del(&gnt_list_entry->node); gnttab_end_foreign_access(gnt_list_entry->gref, 0, 0UL); rinfo->persistent_gnts_c--; - __free_page(gnt_list_entry->page); - kfree(gnt_list_entry); + gnt_list_entry->gref = GRANT_INVALID_REF; + list_add_tail(&gnt_list_entry->node, &rinfo->grants); } spin_unlock_irqrestore(&rinfo->ring_lock, flags); -- cgit v1.2.3-59-g8ed1b From befb1b3c2703897c5b8ffb0044dc5d0e5f27c5d7 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Wed, 19 Sep 2018 10:29:06 -0700 Subject: perf/core: Add sanity check to deal with pinned event failure It is possible that a failure can occur during the scheduling of a pinned event. The initial portion of perf_event_read_local() contains the various error checks an event should pass before it can be considered valid. Ensure that the potential scheduling failure of a pinned event is checked for and have a credible error. Suggested-by: Peter Zijlstra Signed-off-by: Reinette Chatre Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: acme@kernel.org Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: dave.hansen@intel.com Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/6486385d1f30336e9973b24c8c65f5079543d3d3.1537377064.git.reinette.chatre@intel.com --- kernel/events/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index c80549bf82c6..dcb093e7b377 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3935,6 +3935,12 @@ int perf_event_read_local(struct perf_event *event, u64 *value, goto out; } + /* If this is a pinned event it must be running on this CPU */ + if (event->attr.pinned && event->oncpu != smp_processor_id()) { + ret = -EBUSY; + goto out; + } + /* * If the event is currently on this CPU, its either a per-task event, * or local to this CPU. Furthermore it means its ACTIVE (otherwise -- cgit v1.2.3-59-g8ed1b From d51aea13dd6753186a2bea7619029c460bdf0c4c Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 19 Sep 2018 17:22:21 -0700 Subject: cpufreq: qcom-kryo: Fix section annotations There is currently a warning when building the Kryo cpufreq driver into the kernel image: WARNING: vmlinux.o(.text+0x8aa424): Section mismatch in reference from the function qcom_cpufreq_kryo_probe() to the function .init.text:qcom_cpufreq_kryo_get_msm_id() The function qcom_cpufreq_kryo_probe() references the function __init qcom_cpufreq_kryo_get_msm_id(). This is often because qcom_cpufreq_kryo_probe lacks a __init annotation or the annotation of qcom_cpufreq_kryo_get_msm_id is wrong. Remove the '__init' annotation from qcom_cpufreq_kryo_get_msm_id so that there is no more mismatch warning. Additionally, Nick noticed that the remove function was marked as '__init' when it should really be marked as '__exit'. Fixes: 46e2856b8e18 (cpufreq: Add Kryo CPU scaling driver) Fixes: 5ad7346b4ae2 (cpufreq: kryo: Add module remove and exit) Reported-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Acked-by: Viresh Kumar Cc: 4.18+ # 4.18+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/qcom-cpufreq-kryo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c index a1830fa25fc5..2a3675c24032 100644 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c @@ -44,7 +44,7 @@ enum _msm8996_version { struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev; -static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void) +static enum _msm8996_version qcom_cpufreq_kryo_get_msm_id(void) { size_t len; u32 *msm_id; @@ -222,7 +222,7 @@ static int __init qcom_cpufreq_kryo_init(void) } module_init(qcom_cpufreq_kryo_init); -static void __init qcom_cpufreq_kryo_exit(void) +static void __exit qcom_cpufreq_kryo_exit(void) { platform_device_unregister(kryo_cpufreq_pdev); platform_driver_unregister(&qcom_cpufreq_kryo_driver); -- cgit v1.2.3-59-g8ed1b From 03d179a840ce9e694db9d69bb643fdee04cfd28f Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Sun, 30 Sep 2018 13:50:05 +0200 Subject: MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c Commit 51c1e9b554c9 ("auxdisplay: Move panel.c to drivers/auxdisplay folder") moved the file, but the MAINTAINERS reference was not updated. Link: https://lore.kernel.org/lkml/20180928220131.31075-1-joe@perches.com/ Reported-by: Joe Perches Signed-off-by: Miguel Ojeda --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 02a39617ec82..e6fde62a1d65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10949,7 +10949,7 @@ M: Willy Tarreau M: Ksenija Stanojevic S: Odd Fixes F: Documentation/auxdisplay/lcd-panel-cgram.txt -F: drivers/misc/panel.c +F: drivers/auxdisplay/panel.c PARALLEL PORT SUBSYSTEM M: Sudip Mukherjee -- cgit v1.2.3-59-g8ed1b From 17b57b1883c1285f3d0dc2266e8f79286a7bef38 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 30 Sep 2018 07:15:35 -0700 Subject: Linux 4.19-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 0c90c4354979..6c3da3e10f07 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 19 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3-59-g8ed1b