From ccb3b84fa0fb6fb7b46b461881fd60440f579696 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Sat, 13 Nov 2010 14:53:41 +0200 Subject: ASoC: RX1950: Fix hw_params function Unfortunatelly, I misunderstood datasheet, and on s3c244x-iis when MPLLin source for master clock is selected, prescaler has no effect. Remove dividor calculation for 44100 rate; remove 88200 rate at all, rx1950 can't do it. Signed-off-by: Vasily Khoruzhick Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/s3c24xx/rx1950_uda1380.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c index ffd5cf2fb0a9..468cc11fdf47 100644 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ b/sound/soc/s3c24xx/rx1950_uda1380.c @@ -50,7 +50,6 @@ static unsigned int rates[] = { 16000, 44100, 48000, - 88200, }; static struct snd_pcm_hw_constraint_list hw_rates = { @@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = { }; static struct platform_device *s3c24xx_snd_device; -static struct clk *xtal; static int rx1950_startup(struct snd_pcm_substream *substream) { @@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, case 44100: case 88200: clk_source = S3C24XX_CLKSRC_MPLL; - fs_mode = S3C2410_IISMOD_256FS; - div = clk_get_rate(xtal) / (256 * rate); - if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) - div++; + fs_mode = S3C2410_IISMOD_384FS; + div = 1; break; default: printk(KERN_ERR "%s: rate %d is not supported\n", @@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, /* set MCLK division for sample rate */ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_384FS); + fs_mode); if (ret < 0) return ret; @@ -295,17 +291,8 @@ static int __init rx1950_init(void) goto err_plat_add; } - xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); - - if (IS_ERR(xtal)) { - ret = PTR_ERR(xtal); - platform_device_unregister(s3c24xx_snd_device); - goto err_clk; - } - return 0; -err_clk: err_plat_add: err_plat_alloc: err_gpio_conf: @@ -320,7 +307,6 @@ static void __exit rx1950_exit(void) platform_device_unregister(s3c24xx_snd_device); snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), hp_jack_gpios); - clk_put(xtal); gpio_free(S3C2410_GPA(1)); } -- cgit v1.2.3-59-g8ed1b From bcbb243396b82b0369465e9a547b7d5278cd26ad Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 12 Nov 2010 15:14:55 +0000 Subject: ASoC: Fix dapm_seq_compare() for multi-component Ensure that we keep all widget powerups in DAPM sequence by making the CODEC the last thing we compare on rather than the first thing. Also fix the fact that we're currently comparing the widget pointers rather than the CODEC pointers when we do the substraction so we won't get stable results. Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7d85c6496afa..75ed6491222d 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -683,12 +683,12 @@ static int dapm_seq_compare(struct snd_soc_dapm_widget *a, struct snd_soc_dapm_widget *b, int sort[]) { - if (a->codec != b->codec) - return (unsigned long)a - (unsigned long)b; if (sort[a->id] != sort[b->id]) return sort[a->id] - sort[b->id]; if (a->reg != b->reg) return a->reg - b->reg; + if (a->codec != b->codec) + return (unsigned long)a->codec - (unsigned long)b->codec; return 0; } -- cgit v1.2.3-59-g8ed1b