From 77ffd3465ba837e9dc714e17b014e77b2eae765a Mon Sep 17 00:00:00 2001 From: James Smart Date: Thu, 15 Aug 2019 19:36:49 -0700 Subject: scsi: lpfc: Mitigate high memory pre-allocation by SCSI-MQ When SCSI-MQ is enabled, the SCSI-MQ layers will do pre-allocation of MQ resources based on shost values set by the driver. In newer cases of the driver, which attempts to set nr_hw_queues to the cpu count, the multipliers become excessive, with a single shost having SCSI-MQ pre-allocation reaching into the multiple GBytes range. NPIV, which creates additional shosts, only multiply this overhead. On lower-memory systems, this can exhaust system memory very quickly, resulting in a system crash or failures in the driver or elsewhere due to low memory conditions. After testing several scenarios, the situation can be mitigated by limiting the value set in shost->nr_hw_queues to 4. Although the shost values were changed, the driver still had per-cpu hardware queues of its own that allowed parallelization per-cpu. Testing revealed that even with the smallish number for nr_hw_queues for SCSI-MQ, performance levels remained near maximum with the within-driver affiinitization. A module parameter was created to allow the value set for the nr_hw_queues to be tunable. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Ming Lei Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_attr.c | 15 +++++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 10 ++++++---- drivers/scsi/lpfc/lpfc_sli4.h | 5 +++++ 4 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 2c3bb8a966e5..bade2e025ecf 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -824,6 +824,7 @@ struct lpfc_hba { uint32_t cfg_cq_poll_threshold; uint32_t cfg_cq_max_proc_limit; uint32_t cfg_fcp_cpu_map; + uint32_t cfg_fcp_mq_threshold; uint32_t cfg_hdw_queue; uint32_t cfg_irq_chann; uint32_t cfg_suppress_rsp; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index ea62322ffe2b..8d8c495b5b60 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -5708,6 +5708,19 @@ LPFC_ATTR_RW(nvme_oas, 0, 0, 1, LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2, "Embed NVME Command in WQE"); +/* + * lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues + * the driver will advertise it supports to the SCSI layer. + * + * 0 = Set nr_hw_queues by the number of CPUs or HW queues. + * 1,128 = Manually specify the maximum nr_hw_queue value to be set, + * + * Value range is [0,128]. Default value is 8. + */ +LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF, + LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX, + "Set the number of SCSI Queues advertised"); + /* * lpfc_hdw_queue: Set the number of Hardware Queues the driver * will advertise it supports to the NVME and SCSI layers. This also @@ -6030,6 +6043,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_cq_poll_threshold, &dev_attr_lpfc_cq_max_proc_limit, &dev_attr_lpfc_fcp_cpu_map, + &dev_attr_lpfc_fcp_mq_threshold, &dev_attr_lpfc_hdw_queue, &dev_attr_lpfc_irq_chann, &dev_attr_lpfc_suppress_rsp, @@ -7112,6 +7126,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) /* Initialize first burst. Target vs Initiator are different. */ lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb); lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size); + lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold); lpfc_hdw_queue_init(phba, lpfc_hdw_queue); lpfc_irq_chann_init(phba, lpfc_irq_chann); lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index a7549ae32542..1ac98becb5ba 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4309,10 +4309,12 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) shost->max_cmd_len = 16; if (phba->sli_rev == LPFC_SLI_REV4) { - if (phba->cfg_fcp_io_sched == LPFC_FCP_SCHED_BY_HDWQ) - shost->nr_hw_queues = phba->cfg_hdw_queue; - else - shost->nr_hw_queues = phba->sli4_hba.num_present_cpu; + if (!phba->cfg_fcp_mq_threshold || + phba->cfg_fcp_mq_threshold > phba->cfg_hdw_queue) + phba->cfg_fcp_mq_threshold = phba->cfg_hdw_queue; + + shost->nr_hw_queues = min_t(int, 2 * num_possible_nodes(), + phba->cfg_fcp_mq_threshold); shost->dma_boundary = phba->sli4_hba.pc_sli4_params.sge_supp_len-1; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 3aeca387b22a..329f7aa7e169 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -44,6 +44,11 @@ #define LPFC_HBA_HDWQ_MAX 128 #define LPFC_HBA_HDWQ_DEF 0 +/* FCP MQ queue count limiting */ +#define LPFC_FCP_MQ_THRESHOLD_MIN 0 +#define LPFC_FCP_MQ_THRESHOLD_MAX 128 +#define LPFC_FCP_MQ_THRESHOLD_DEF 8 + /* Common buffer size to accomidate SCSI and NVME IO buffers */ #define LPFC_COMMON_IO_BUF_SZ 768 -- cgit v1.2.3-59-g8ed1b