From 8742beb50f2db903d3b6d69ddd81d67ce9914453 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Tue, 18 Dec 2018 16:57:04 +0900 Subject: net: phy: Fix the issue that netif always links up after resuming Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device") Suggested-by: Heiner Kallweit Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 18e92c19c5ab..26c41ede54a4 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -308,11 +308,8 @@ static int mdio_bus_phy_restore(struct device *dev) if (ret < 0) return ret; - /* The PHY needs to renegotiate. */ - phydev->link = 0; - phydev->state = PHY_UP; - - phy_start_machine(phydev); + if (phydev->attached_dev && phydev->adjust_link) + phy_start_machine(phydev); return 0; } -- cgit v1.2.3-59-g8ed1b