From b1869000a60b0c72022811f24110a52d3e300b1e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 12 May 2006 11:14:25 -0400 Subject: [PATCH] UHCI: Common result routine for Control/Bulk/Interrupt This patch (as679) combines the result routine for Control URBs with the routine for Bulk/Interrupt URBs. Along the way I eliminated the debugging printouts for Control transfers unless the debugging level is set higher than 1. I also eliminated a long-unused (#ifdef'ed-out) section that works around some buggy old APC BackUPS devices. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-q.c | 342 +++++++++++++++++----------------------------- 1 file changed, 125 insertions(+), 217 deletions(-) diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 693e92c1bd9e..30e36031fe21 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -618,134 +618,6 @@ nomem: return -ENOMEM; } -/* - * If control-IN transfer was short, the status packet wasn't sent. - * This routine changes the element pointer in the QH to point at the - * status TD. It's safe to do this even while the QH is live, because - * the hardware only updates the element pointer following a successful - * transfer. The inactive TD for the short packet won't cause an update, - * so the pointer won't get overwritten. The next time the controller - * sees this QH, it will send the status packet. - */ -static int usb_control_retrigger_status(struct uhci_hcd *uhci, struct urb *urb) -{ - struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv; - struct uhci_td *td; - - urbp->short_transfer = 1; - - td = list_entry(urbp->td_list.prev, struct uhci_td, list); - urbp->qh->element = cpu_to_le32(td->dma_handle); - - return -EINPROGRESS; -} - - -static int uhci_result_control(struct uhci_hcd *uhci, struct urb *urb) -{ - struct list_head *tmp, *head; - struct urb_priv *urbp = urb->hcpriv; - struct uhci_td *td; - unsigned int status; - int ret = 0; - - head = &urbp->td_list; - if (urbp->short_transfer) { - tmp = head->prev; - goto status_stage; - } - - urb->actual_length = 0; - - tmp = head->next; - td = list_entry(tmp, struct uhci_td, list); - - /* The first TD is the SETUP stage, check the status, but skip */ - /* the count */ - status = uhci_status_bits(td_status(td)); - if (status & TD_CTRL_ACTIVE) - return -EINPROGRESS; - - if (status) - goto td_error; - - /* The rest of the TDs (but the last) are data */ - tmp = tmp->next; - while (tmp != head && tmp->next != head) { - unsigned int ctrlstat; - - td = list_entry(tmp, struct uhci_td, list); - tmp = tmp->next; - - ctrlstat = td_status(td); - status = uhci_status_bits(ctrlstat); - if (status & TD_CTRL_ACTIVE) - return -EINPROGRESS; - - urb->actual_length += uhci_actual_length(ctrlstat); - - if (status) - goto td_error; - - /* Check to see if we received a short packet */ - if (uhci_actual_length(ctrlstat) < - uhci_expected_length(td_token(td))) { - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - ret = -EREMOTEIO; - goto err; - } - - return usb_control_retrigger_status(uhci, urb); - } - } - -status_stage: - td = list_entry(tmp, struct uhci_td, list); - - /* Control status stage */ - status = td_status(td); - -#ifdef I_HAVE_BUGGY_APC_BACKUPS - /* APC BackUPS Pro kludge */ - /* It tries to send all of the descriptor instead of the amount */ - /* we requested */ - if (status & TD_CTRL_IOC && /* IOC is masked out by uhci_status_bits */ - status & TD_CTRL_ACTIVE && - status & TD_CTRL_NAK) - return 0; -#endif - - status = uhci_status_bits(status); - if (status & TD_CTRL_ACTIVE) - return -EINPROGRESS; - - if (status) - goto td_error; - - return 0; - -td_error: - ret = uhci_map_status(status, uhci_packetout(td_token(td))); - -err: - if ((debug == 1 && ret != -EPIPE) || debug > 1) { - /* Some debugging code */ - dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n", - __FUNCTION__, status); - - if (errbuf) { - /* Print the chain for debugging purposes */ - uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); - lprintk(errbuf); - } - } - - /* Note that the queue has stopped */ - urbp->qh->element = UHCI_PTR_TERM; - urbp->qh->is_stopped = 1; - return ret; -} - /* * Common submit for bulk and interrupt */ @@ -864,86 +736,6 @@ nomem: return -ENOMEM; } -/* - * Common result for bulk and interrupt - */ -static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) -{ - struct urb_priv *urbp = urb->hcpriv; - struct uhci_td *td; - unsigned int status = 0; - int ret = 0; - - urb->actual_length = 0; - - list_for_each_entry(td, &urbp->td_list, list) { - unsigned int ctrlstat = td_status(td); - - status = uhci_status_bits(ctrlstat); - if (status & TD_CTRL_ACTIVE) - return -EINPROGRESS; - - urb->actual_length += uhci_actual_length(ctrlstat); - - if (status) - goto td_error; - - if (uhci_actual_length(ctrlstat) < - uhci_expected_length(td_token(td))) { - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - ret = -EREMOTEIO; - goto err; - } - - /* - * This URB stopped short of its end. We have to - * fix up the toggles of the following URBs on the - * queue and restart the queue. - * - * Do this only the first time we encounter the - * short URB. - */ - if (!urbp->short_transfer) { - urbp->short_transfer = 1; - urbp->qh->initial_toggle = - uhci_toggle(td_token(td)) ^ 1; - uhci_fixup_toggles(urbp->qh, 1); - - td = list_entry(urbp->td_list.prev, - struct uhci_td, list); - urbp->qh->element = td->link; - } - break; - } - } - - return 0; - -td_error: - ret = uhci_map_status(status, uhci_packetout(td_token(td))); - - if ((debug == 1 && ret != -EPIPE) || debug > 1) { - /* Some debugging code */ - dev_dbg(uhci_dev(uhci), "%s: failed with status %x\n", - __FUNCTION__, status); - - if (debug > 1 && errbuf) { - /* Print the chain for debugging purposes */ - uhci_show_qh(urbp->qh, errbuf, ERRBUF_LEN, 0); - lprintk(errbuf); - } - } -err: - - /* Note that the queue has stopped and save the next toggle value */ - urbp->qh->element = UHCI_PTR_TERM; - urbp->qh->is_stopped = 1; - urbp->qh->needs_fixup = 1; - urbp->qh->initial_toggle = uhci_toggle(td_token(td)) ^ - (ret == -EREMOTEIO); - return ret; -} - static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb, struct uhci_qh *qh) { @@ -971,6 +763,129 @@ static inline int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb, return uhci_submit_common(uhci, urb, qh); } +/* + * Fix up the data structures following a short transfer + */ +static int uhci_fixup_short_transfer(struct uhci_hcd *uhci, + struct uhci_qh *qh, struct urb_priv *urbp, + struct uhci_td *short_td) +{ + struct uhci_td *td; + int ret = 0; + + td = list_entry(urbp->td_list.prev, struct uhci_td, list); + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { + urbp->short_transfer = 1; + + /* When a control transfer is short, we have to restart + * the queue at the status stage transaction, which is + * the last TD. */ + qh->element = cpu_to_le32(td->dma_handle); + ret = -EINPROGRESS; + + } else if (!urbp->short_transfer) { + urbp->short_transfer = 1; + + /* When a bulk/interrupt transfer is short, we have to + * fix up the toggles of the following URBs on the queue + * before restarting the queue at the next URB. */ + qh->initial_toggle = uhci_toggle(td_token(short_td)) ^ 1; + uhci_fixup_toggles(qh, 1); + + qh->element = td->link; + } + + return ret; +} + +/* + * Common result for control, bulk, and interrupt + */ +static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) +{ + struct urb_priv *urbp = urb->hcpriv; + struct uhci_qh *qh = urbp->qh; + struct uhci_td *td; + struct list_head *tmp; + unsigned status; + int ret = 0; + + tmp = urbp->td_list.next; + + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { + if (urbp->short_transfer) + tmp = urbp->td_list.prev; + else + urb->actual_length = -8; /* SETUP packet */ + } else + urb->actual_length = 0; + + + while (tmp != &urbp->td_list) { + unsigned int ctrlstat; + int len; + + td = list_entry(tmp, struct uhci_td, list); + tmp = tmp->next; + + ctrlstat = td_status(td); + status = uhci_status_bits(ctrlstat); + if (status & TD_CTRL_ACTIVE) + return -EINPROGRESS; + + len = uhci_actual_length(ctrlstat); + urb->actual_length += len; + + if (status) { + ret = uhci_map_status(status, + uhci_packetout(td_token(td))); + if ((debug == 1 && ret != -EPIPE) || debug > 1) { + /* Some debugging code */ + dev_dbg(uhci_dev(uhci), + "%s: failed with status %x\n", + __FUNCTION__, status); + + if (debug > 1 && errbuf) { + /* Print the chain for debugging */ + uhci_show_qh(urbp->qh, errbuf, + ERRBUF_LEN, 0); + lprintk(errbuf); + } + } + + } else if (len < uhci_expected_length(td_token(td))) { + + /* We received a short packet */ + if (urb->transfer_flags & URB_SHORT_NOT_OK) + ret = -EREMOTEIO; + else if (ctrlstat & TD_CTRL_SPD) + ret = 1; + } + + if (ret != 0) + goto err; + } + return ret; + +err: + if (ret < 0) { + /* In case a control transfer gets an error + * during the setup stage */ + urb->actual_length = max(urb->actual_length, 0); + + /* Note that the queue has stopped and save + * the next toggle value */ + qh->element = UHCI_PTR_TERM; + qh->is_stopped = 1; + qh->needs_fixup = (qh->type != USB_ENDPOINT_XFER_CONTROL); + qh->initial_toggle = uhci_toggle(td_token(td)) ^ + (ret == -EREMOTEIO); + + } else /* Short packet received */ + ret = uhci_fixup_short_transfer(uhci, qh, urbp, td); + return ret; +} + /* * Isochronous transfers */ @@ -1276,17 +1191,10 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh, urbp = list_entry(qh->queue.next, struct urb_priv, node); urb = urbp->urb; - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: - status = uhci_result_control(uhci, urb); - break; - case USB_ENDPOINT_XFER_ISOC: + if (qh->type == USB_ENDPOINT_XFER_ISOC) status = uhci_result_isochronous(uhci, urb); - break; - default: /* USB_ENDPOINT_XFER_BULK or _INT */ + else status = uhci_result_common(uhci, urb); - break; - } if (status == -EINPROGRESS) break; -- cgit v1.2.3-59-g8ed1b