From b5affb0147cee0ea05d909396f8e389092729236 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Wed, 16 May 2012 17:37:24 +0800 Subject: blackfin: add bf60x to current framework This patch added bf60x to current blackfin kernel framework. Signed-off-by: Bob Liu --- arch/blackfin/Kconfig | 25 ++++- arch/blackfin/Makefile | 2 + arch/blackfin/configs/BF609-EZKIT_defconfig | 153 +++++++++++++++++++++++++ arch/blackfin/include/asm/bfin-global.h | 5 + arch/blackfin/include/asm/bfin_dma.h | 84 +++++++++++++- arch/blackfin/include/asm/bfin_serial.h | 168 +++++++++++++++++++++++++--- arch/blackfin/include/asm/dma.h | 137 +++++++++++++++++++---- arch/blackfin/include/asm/fixed_code.h | 30 ++--- arch/blackfin/include/asm/page.h | 5 +- arch/blackfin/kernel/bfin_dma.c | 143 +++++++++++++++++------ arch/blackfin/kernel/bfin_gpio.c | 27 ++--- arch/blackfin/kernel/debug-mmrs.c | 9 +- arch/blackfin/kernel/process.c | 8 +- arch/blackfin/kernel/reboot.c | 6 +- arch/blackfin/kernel/setup.c | 159 +++++++++++++++++++++++--- arch/blackfin/kernel/shadow_console.c | 6 +- arch/blackfin/mach-common/entry.S | 3 +- arch/blackfin/mach-common/head.S | 2 - arch/blackfin/mm/init.c | 14 +-- 19 files changed, 840 insertions(+), 146 deletions(-) create mode 100644 arch/blackfin/configs/BF609-EZKIT_defconfig diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 373a6902d8fa..23bae9a3f787 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -226,6 +226,12 @@ config BF561 help BF561 Processor Support. +config BF609 + bool "BF609" + select CLKDEV_LOOKUP + help + BF609 Processor Support. + endchoice config SMP @@ -251,27 +257,27 @@ config HOTPLUG_CPU config BF_REV_MIN int - default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 2 if (BF537 || BF536 || BF534) default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) || BF60x default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_0 if (BF51x || BF52x) + default BF_REV_0_0 if (BF51x || BF52x || BF60x) default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM)) default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || (BF54x && !BF54xM)) + depends on (BF51x || BF52x || (BF54x && !BF54xM) || BF60x) config BF_REV_0_1 bool "0.1" @@ -350,6 +356,7 @@ source "arch/blackfin/mach-bf561/Kconfig" source "arch/blackfin/mach-bf537/Kconfig" source "arch/blackfin/mach-bf538/Kconfig" source "arch/blackfin/mach-bf548/Kconfig" +source "arch/blackfin/mach-bf609/Kconfig" menu "Board customizations" @@ -379,6 +386,12 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. +config PHY_RAM_BASE_ADDRESS + hex "Physical RAM Base" + default 0x0 + help + set BF609 FPGA physical SRAM base address + config ROM_BASE hex "Kernel ROM Base" depends on ROMKERNEL @@ -1051,7 +1064,7 @@ endchoice config BFIN_L2_DCACHEABLE bool "Enable DCACHE for L2 SRAM" depends on BFIN_DCACHE - depends on (BF54x || BF561) && !SMP + depends on (BF54x || BF561 || BF60x) && !SMP default n choice prompt "L2 SRAM DCACHE policy" @@ -1077,6 +1090,7 @@ config MPU comment "Asynchronous Memory Configuration" menu "EBIU_AMGCTL Global Control" + depends on !BF60x config C_AMCKEN bool "Enable CLKOUT" default y @@ -1127,6 +1141,7 @@ endchoice endmenu menu "EBIU_AMBCTL Control" + depends on !BF60x config BANK_0 hex "Bank 0 (AMBCTL0.L)" default 0x7BB0 diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 46f42b2066e5..74fdf679da01 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -54,6 +54,7 @@ machine-$(CONFIG_BF548M) := bf548 machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF549M) := bf548 machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF609) := bf609 MACHINE := $(machine-y) export MACHINE @@ -86,6 +87,7 @@ cpu-$(CONFIG_BF548M) := bf548m cpu-$(CONFIG_BF549) := bf549 cpu-$(CONFIG_BF549M) := bf549m cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF609) := bf609 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 diff --git a/arch/blackfin/configs/BF609-EZKIT_defconfig b/arch/blackfin/configs/BF609-EZKIT_defconfig new file mode 100644 index 000000000000..07c92465109a --- /dev/null +++ b/arch/blackfin/configs/BF609-EZKIT_defconfig @@ -0,0 +1,153 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +# CONFIG_ELF_CORE is not set +# CONFIG_FUTEX is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +CONFIG_SLAB=y +CONFIG_MMAP_ALLOW_UNINITIALIZED=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_BF609=y +CONFIG_PINT1_ASSIGN=0x01010000 +CONFIG_PINT2_ASSIGN=0x07000101 +CONFIG_PINT3_ASSIGN=0x02020303 +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +# CONFIG_APP_STACK_L1 is not set +# CONFIG_BFIN_INS_LOWOVERHEAD is not set +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0 +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_SUSPEND is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_CAN=y +CONFIG_CAN_BFIN=y +CONFIG_IRDA=y +CONFIG_IRTTY_SIR=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_FW_LOADER=m +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_BFIN_BF60x=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_UBI=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_IEEE1588=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_BFIN_ROTARY=y +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_SIMPLE_TIMER=m +CONFIG_BFIN_LINKPORT=y +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_BLACKFIN_TWI=y +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 +CONFIG_SPI=y +CONFIG_SPI_BFIN6XX=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_BFIN_WDT=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=m +CONFIG_SND_BF6XX_I2S=m +CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61=m +CONFIG_SND_SOC_ALL_CODECS=m +CONFIG_USB=y +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_BLACKFIN=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_ZERO=y +CONFIG_MMC=y +CONFIG_SDH_BFIN=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_JFFS2_FS=m +CONFIG_UBIFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_POINTER=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_BFIN_PSEUDODBG_INSNS=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 17bcbf60bcae..a83e922a878d 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -35,6 +35,11 @@ extern void bfin_setup_cpudata(unsigned int cpu); extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); +#ifdef CONFIG_BF60x +extern unsigned long get_sclk0(void); +extern unsigned long get_sclk1(void); +extern unsigned long get_dramclk(void); +#endif extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); diff --git a/arch/blackfin/include/asm/bfin_dma.h b/arch/blackfin/include/asm/bfin_dma.h index d51120744148..6319f4e49083 100644 --- a/arch/blackfin/include/asm/bfin_dma.h +++ b/arch/blackfin/include/asm/bfin_dma.h @@ -15,12 +15,55 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */ +#define DI_EN DI_EN_X /* Data Interrupt Enable */ +#define NDSIZE_0 0x00000000 /* Next Descriptor Size = 1 */ +#define NDSIZE_1 0x00010000 /* Next Descriptor Size = 2 */ +#define NDSIZE_2 0x00020000 /* Next Descriptor Size = 3 */ +#define NDSIZE_3 0x00030000 /* Next Descriptor Size = 4 */ +#define NDSIZE_4 0x00040000 /* Next Descriptor Size = 5 */ +#define NDSIZE_5 0x00050000 /* Next Descriptor Size = 6 */ +#define NDSIZE_6 0x00060000 /* Next Descriptor Size = 7 */ +#define NDSIZE 0x00070000 /* Next Descriptor Size */ +#define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */ +#define DMAFLOW_LARGE DMAFLOW_LIST +#define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */ + +#else + +#define PSIZE_16 0x0000 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x0000 /* Transfer Word Size = 32 */ #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ +#define DI_EN_X 0x00C0 /* Data Interrupt Enable in X count*/ +#define DI_EN_Y 0x0080 /* Data Interrupt Enable in Y count*/ #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ @@ -32,18 +75,26 @@ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ #define NDSIZE 0x0f00 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define NDSIZE_OFFSET 8 /* Next Descriptor Size Offset */ #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ /* DMA_IRQ_STATUS Masks */ #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#ifdef CONFIG_BF60x +#define DMA_PIRQ 0x0004 /* DMA Peripheral Error Interrupt Status */ +#else +#define DMA_PIRQ 0 +#endif /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -57,6 +108,26 @@ struct bfin_dma_regs { u32 next_desc_ptr; u32 start_addr; +#ifdef CONFIG_BF60x + u32 cfg; + u32 x_count; + u32 x_modify; + u32 y_count; + u32 y_modify; + u32 pad1; + u32 pad2; + u32 curr_desc_ptr; + u32 prev_desc_ptr; + u32 curr_addr; + u32 irq_status; + u32 curr_x_count; + u32 curr_y_count; + u32 pad3; + u32 bw_limit_count; + u32 curr_bw_limit_count; + u32 bw_monitor_count; + u32 curr_bw_monitor_count; +#else __BFP(config); u32 __pad0; __BFP(x_count); @@ -71,8 +142,10 @@ struct bfin_dma_regs { u32 __pad1; __BFP(curr_y_count); u32 __pad2; +#endif }; +#ifndef CONFIG_BF60x /* * bfin handshake mdma registers layout */ @@ -85,6 +158,7 @@ struct bfin_hmdma_regs { __BFP(ecount); __BFP(bcount); }; +#endif #undef __BFP diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 68bcc3d119b6..80a58488dbe7 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -18,7 +18,7 @@ defined(CONFIG_BFIN_UART1_CTSRTS) || \ defined(CONFIG_BFIN_UART2_CTSRTS) || \ defined(CONFIG_BFIN_UART3_CTSRTS) -# ifdef BFIN_UART_BF54X_STYLE +# if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE) # define CONFIG_SERIAL_BFIN_HARD_CTSRTS # else # define CONFIG_SERIAL_BFIN_CTSRTS @@ -58,14 +58,67 @@ struct bfin_serial_port { #endif }; +#ifdef BFIN_UART_BF60X_STYLE + +/* UART_CTL Masks */ +#define UCEN 0x1 /* Enable UARTx Clocks */ +#define LOOP_ENA 0x2 /* Loopback Mode Enable */ +#define UMOD_MDB 0x10 /* Enable MDB Mode */ +#define UMOD_IRDA 0x20 /* Enable IrDA Mode */ +#define UMOD_MASK 0x30 /* Uart Mode Mask */ +#define WLS(x) (((x-5) & 0x03) << 8) /* Word Length Select */ +#define WLS_MASK 0x300 /* Word length Select Mask */ +#define STB 0x1000 /* Stop Bits */ +#define STBH 0x2000 /* Half Stop Bits */ +#define PEN 0x4000 /* Parity Enable */ +#define EPS 0x8000 /* Even Parity Select */ +#define STP 0x10000 /* Stick Parity */ +#define FPE 0x20000 /* Force Parity Error On Transmit */ +#define FFE 0x40000 /* Force Framing Error On Transmit */ +#define SB 0x80000 /* Set Break */ +#define LCR_MASK (STP | EPS | PEN | STB | WLS_MASK) +#define FCPOL 0x400000 /* Flow Control Pin Polarity */ +#define RPOLC 0x800000 /* IrDA RX Polarity Change */ +#define TPOLC 0x1000000 /* IrDA TX Polarity Change */ +#define MRTS 0x2000000 /* Manual Request To Send */ +#define XOFF 0x4000000 /* Transmitter Off */ +#define ARTS 0x8000000 /* Automatic Request To Send */ +#define ACTS 0x10000000 /* Automatic Clear To Send */ +#define RFIT 0x20000000 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x40000000 /* Receive FIFO RTS Threshold */ + +/* UART_STAT Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x80 /* TSR and UART_THR Empty */ +#define TFI 0x100 /* Transmission Finished Indicator */ + +#define ASTKY 0x200 /* Address Sticky */ +#define ADDR 0x400 /* Address bit status */ +#define RO 0x800 /* Reception Ongoing */ +#define SCTS 0x1000 /* Sticky CTS */ +#define CTS 0x10000 /* Clear To Send */ +#define RFCS 0x20000 /* Receive FIFO Count Status */ + +/* UART_CLOCK Masks */ +#define EDBO 0x80000000 /* Enable Devide by One */ + +#else /* BFIN_UART_BF60X_STYLE */ + /* UART_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define WLS_MASK 0x03 /* Word length Select Mask */ #define STB 0x04 /* Stop Bits */ #define PEN 0x08 /* Parity Enable */ #define EPS 0x10 /* Even Parity Select */ #define STP 0x20 /* Stick Parity */ #define SB 0x40 /* Set Break */ #define DLAB 0x80 /* Divisor Latch Access */ +#define LCR_MASK (STP | EPS | PEN | STB | WLS_MASK) /* UART_LSR Masks */ #define DR 0x01 /* Data Ready */ @@ -77,15 +130,6 @@ struct bfin_serial_port { #define TEMT 0x40 /* TSR and UART_THR Empty */ #define TFI 0x80 /* Transmission Finished Indicator */ -/* UART_IER Masks */ -#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ -#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ -#define ELSI 0x04 /* Enable RX Status Interrupt */ -#define EDSSI 0x08 /* Enable Modem Status Interrupt */ -#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ -#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ - /* UART_MCR Masks */ #define XOFF 0x01 /* Transmitter Off */ #define MRTS 0x02 /* Manual Request To Send */ @@ -103,13 +147,36 @@ struct bfin_serial_port { /* UART_GCTL Masks */ #define UCEN 0x01 /* Enable UARTx Clocks */ -#define IREN 0x02 /* Enable IrDA Mode */ +#define UMOD_IRDA 0x02 /* Enable IrDA Mode */ +#define UMOD_MASK 0x02 /* Uart Mode Mask */ #define TPOLC 0x04 /* IrDA TX Polarity Change */ #define RPOLC 0x08 /* IrDA RX Polarity Change */ #define FPE 0x10 /* Force Parity Error On Transmit */ #define FFE 0x20 /* Force Framing Error On Transmit */ -#ifdef BFIN_UART_BF54X_STYLE +#endif /* BFIN_UART_BF60X_STYLE */ + +/* UART_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ +#define EDSSI 0x08 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +#if defined(BFIN_UART_BF60X_STYLE) +# define OFFSET_REDIV 0x00 /* Version ID Register */ +# define OFFSET_CTL 0x04 /* Control Register */ +# define OFFSET_STAT 0x08 /* Status Register */ +# define OFFSET_SCR 0x0C /* SCR Scratch Register */ +# define OFFSET_CLK 0x10 /* Clock Rate Register */ +# define OFFSET_IER 0x14 /* Interrupt Enable Register */ +# define OFFSET_IER_SET 0x18 /* Set Interrupt Enable Register */ +# define OFFSET_IER_CLEAR 0x1C /* Clear Interrupt Enable Register */ +# define OFFSET_RBR 0x20 /* Receive Buffer register */ +# define OFFSET_THR 0x24 /* Transmit Holding register */ +#elif defined(BFIN_UART_BF54X_STYLE) # define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ # define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ # define OFFSET_GCTL 0x08 /* Global Control Register */ @@ -145,7 +212,23 @@ struct bfin_serial_port { */ #define __BFP(m) u16 m; u16 __pad_##m struct bfin_uart_regs { -#ifdef BFIN_UART_BF54X_STYLE +#if defined(BFIN_UART_BF60X_STYLE) + u32 revid; + u32 ctl; + u32 stat; + u32 scr; + u32 clk; + u32 ier; + u32 ier_set; + u32 ier_clear; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv; + u32 rxdiv; +#elif defined(BFIN_UART_BF54X_STYLE) __BFP(dll); __BFP(dlh); __BFP(gctl); @@ -182,13 +265,58 @@ struct bfin_uart_regs { }; #undef __BFP +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) + +/* #ifndef port_membase # define port_membase(p) 0 #endif +*/ +#ifdef BFIN_UART_BF60X_STYLE + +#define UART_GET_CHAR(p) bfin_read32(port_membase(p) + OFFSET_RBR) +#define UART_GET_CLK(p) bfin_read32(port_membase(p) + OFFSET_CLK) +#define UART_GET_CTL(p) bfin_read32(port_membase(p) + OFFSET_CTL) +#define UART_GET_GCTL(p) UART_GET_CTL(p) +#define UART_GET_LCR(p) UART_GET_CTL(p) +#define UART_GET_MCR(p) UART_GET_CTL(p) +#define UART_GET_STAT(p) bfin_read32(port_membase(p) + OFFSET_STAT) +#define UART_GET_MSR(p) UART_GET_STAT(p) + +#define UART_PUT_CHAR(p, v) bfin_write32(port_membase(p) + OFFSET_THR, v) +#define UART_PUT_CLK(p, v) bfin_write32(port_membase(p) + OFFSET_CLK, v) +#define UART_PUT_CTL(p, v) bfin_write32(port_membase(p) + OFFSET_CTL, v) +#define UART_PUT_GCTL(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_LCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_MCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_STAT(p, v) bfin_write32(port_membase(p) + OFFSET_STAT, v) + +#define UART_CLEAR_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_CLEAR, v) +#define UART_GET_IER(p) bfin_read32(port_membase(p) + OFFSET_IER) +#define UART_SET_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_SET, v) + +#define UART_CLEAR_DLAB(p) /* MMRs not muxed on BF60x */ +#define UART_SET_DLAB(p) /* MMRs not muxed on BF60x */ + +#define UART_CLEAR_LSR(p) UART_PUT_STAT(p, -1) +#define UART_GET_LSR(p) UART_GET_STAT(p) +#define UART_PUT_LSR(p, v) UART_PUT_STAT(p, v) + +/* This handles hard CTS/RTS */ +#define BFIN_UART_CTSRTS_HARD +#define UART_CLEAR_SCTS(p) UART_PUT_STAT(p, SCTS) +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#else /* BFIN_UART_BF60X_STYLE */ #define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) #define UART_GET_DLL(p) bfin_read16(port_membase(p) + OFFSET_DLL) #define UART_GET_DLH(p) bfin_read16(port_membase(p) + OFFSET_DLH) +#define UART_GET_CLK(p) ((UART_GET_DLH(p) << 8) | UART_GET_DLL(p)) #define UART_GET_GCTL(p) bfin_read16(port_membase(p) + OFFSET_GCTL) #define UART_GET_LCR(p) bfin_read16(port_membase(p) + OFFSET_LCR) #define UART_GET_MCR(p) bfin_read16(port_membase(p) + OFFSET_MCR) @@ -197,6 +325,11 @@ struct bfin_uart_regs { #define UART_PUT_CHAR(p, v) bfin_write16(port_membase(p) + OFFSET_THR, v) #define UART_PUT_DLL(p, v) bfin_write16(port_membase(p) + OFFSET_DLL, v) #define UART_PUT_DLH(p, v) bfin_write16(port_membase(p) + OFFSET_DLH, v) +#define UART_PUT_CLK(p, v) do \ +{\ +UART_PUT_DLL(p, v & 0xFF); \ +UART_PUT_DLH(p, (v >> 8) & 0xFF); } while (0); + #define UART_PUT_GCTL(p, v) bfin_write16(port_membase(p) + OFFSET_GCTL, v) #define UART_PUT_LCR(p, v) bfin_write16(port_membase(p) + OFFSET_LCR, v) #define UART_PUT_MCR(p, v) bfin_write16(port_membase(p) + OFFSET_MCR, v) @@ -233,12 +366,17 @@ struct bfin_uart_regs { #define UART_CLEAR_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0) #define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) + +/* #ifndef put_lsr_cache # define put_lsr_cache(p, v) #endif #ifndef get_lsr_cache # define get_lsr_cache(p) 0 #endif +*/ /* The hardware clears the LSR bits upon read, so we need to cache * some of the more fun bits in software so they don't get lost @@ -267,7 +405,9 @@ static inline void UART_PUT_LSR(void *p, uint16_t val) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) -#endif +#endif /* BFIN_UART_BF54X_STYLE */ + +#endif /* BFIN_UART_BF60X_STYLE */ #ifndef BFIN_UART_TX_FIFO_SIZE # define BFIN_UART_TX_FIFO_SIZE 2 diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index dac0c97242bb..40e9c2bbc6e3 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -22,12 +22,22 @@ #define DATA_SIZE_8 0 #define DATA_SIZE_16 1 #define DATA_SIZE_32 2 +#ifdef CONFIG_BF60x +#define DATA_SIZE_64 3 +#endif #define DMA_FLOW_STOP 0 #define DMA_FLOW_AUTO 1 +#ifdef CONFIG_BF60x +#define DMA_FLOW_LIST 4 +#define DMA_FLOW_ARRAY 5 +#define DMA_FLOW_LIST_DEMAND 6 +#define DMA_FLOW_ARRAY_DEMAND 7 +#else #define DMA_FLOW_ARRAY 4 #define DMA_FLOW_SMALL 6 #define DMA_FLOW_LARGE 7 +#endif #define DIMENSION_LINEAR 0 #define DIMENSION_2D 1 @@ -36,26 +46,80 @@ #define DIR_WRITE 1 #define INTR_DISABLE 0 +#ifdef CONFIG_BF60x +#define INTR_ON_PERI 1 +#endif #define INTR_ON_BUF 2 #define INTR_ON_ROW 3 #define DMA_NOSYNC_KEEP_DMA_BUF 0 #define DMA_SYNC_RESTART 1 +#ifdef DMA_MMR_SIZE_32 +#define DMA_MMR_SIZE_TYPE long +#define DMA_MMR_READ bfin_read32 +#define DMA_MMR_WRITE bfin_write32 +#else +#define DMA_MMR_SIZE_TYPE short +#define DMA_MMR_READ bfin_read16 +#define DMA_MMR_WRITE bfin_write16 +#endif + +struct dma_desc_array { + unsigned long start_addr; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; +} __attribute__((packed)); + struct dmasg { void *next_desc_addr; unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; + unsigned DMA_MMR_SIZE_TYPE y_count; + DMA_MMR_SIZE_TYPE y_modify; } __attribute__((packed)); struct dma_register { void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ unsigned long start_addr; /* DMA Start address register */ +#ifdef CONFIG_BF60x + unsigned long cfg; /* DMA Configuration register */ + unsigned long x_count; /* DMA x_count register */ + + long x_modify; /* DMA x_modify register */ + + unsigned long y_count; /* DMA y_count register */ + + long y_modify; /* DMA y_modify register */ + + unsigned long reserved; + unsigned long reserved2; + + void *curr_desc_ptr; /* DMA Current Descriptor Pointer + register */ + void *prev_desc_ptr; /* DMA previous initial Descriptor Pointer + register */ + unsigned long curr_addr_ptr; /* DMA Current Address Pointer + register */ + unsigned long irq_status; /* DMA irq status register */ + + unsigned long curr_x_count; /* DMA Current x-count register */ + + unsigned long curr_y_count; /* DMA Current y-count register */ + + unsigned long reserved3; + + unsigned long bw_limit_count; /* DMA band width limit count register */ + unsigned long curr_bw_limit_count; /* DMA Current band width limit + count register */ + unsigned long bw_monitor_count; /* DMA band width limit count register */ + unsigned long curr_bw_monitor_count; /* DMA Current band width limit + count register */ +#else unsigned short cfg; /* DMA Configuration register */ unsigned short dummy1; /* DMA Configuration register */ @@ -92,6 +156,7 @@ struct dma_register { unsigned short dummy9; unsigned long reserved3; +#endif }; @@ -131,23 +196,23 @@ static inline void set_dma_curr_desc_addr(unsigned int channel, void *addr) { dma_ch[channel].regs->curr_desc_ptr = addr; } -static inline void set_dma_x_count(unsigned int channel, unsigned short x_count) +static inline void set_dma_x_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE x_count) { dma_ch[channel].regs->x_count = x_count; } -static inline void set_dma_y_count(unsigned int channel, unsigned short y_count) +static inline void set_dma_y_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE y_count) { dma_ch[channel].regs->y_count = y_count; } -static inline void set_dma_x_modify(unsigned int channel, short x_modify) +static inline void set_dma_x_modify(unsigned int channel, DMA_MMR_SIZE_TYPE x_modify) { dma_ch[channel].regs->x_modify = x_modify; } -static inline void set_dma_y_modify(unsigned int channel, short y_modify) +static inline void set_dma_y_modify(unsigned int channel, DMA_MMR_SIZE_TYPE y_modify) { dma_ch[channel].regs->y_modify = y_modify; } -static inline void set_dma_config(unsigned int channel, unsigned short config) +static inline void set_dma_config(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE config) { dma_ch[channel].regs->cfg = config; } @@ -156,23 +221,55 @@ static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr) dma_ch[channel].regs->curr_addr_ptr = addr; } -static inline unsigned short +#ifdef CONFIG_BF60x +static inline unsigned long +set_bfin_dma_config2(char direction, char flow_mode, char intr_mode, + char dma_mode, char mem_width, char syncmode, char peri_width) +{ + unsigned long config = 0; + + switch (intr_mode) { + case INTR_ON_BUF: + if (dma_mode == DIMENSION_2D) + config = DI_EN_Y; + else + config = DI_EN_X; + break; + case INTR_ON_ROW: + config = DI_EN_X; + break; + case INTR_ON_PERI: + config = DI_EN_P; + break; + }; + + return config | (direction << 1) | (mem_width << 8) | (dma_mode << 26) | + (flow_mode << 12) | (syncmode << 2) | (peri_width << 4); +} +#endif + +static inline unsigned DMA_MMR_SIZE_TYPE set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, char syncmode) + char intr_mode, char dma_mode, char mem_width, char syncmode) { - return (direction << 1) | (width << 2) | (dma_mode << 4) | +#ifdef CONFIG_BF60x + return set_bfin_dma_config2(direction, flow_mode, intr_mode, dma_mode, + mem_width, syncmode, mem_width); +#else + return (direction << 1) | (mem_width << 2) | (dma_mode << 4) | (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5); +#endif } -static inline unsigned short get_dma_curr_irqstat(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_irqstat(unsigned int channel) { return dma_ch[channel].regs->irq_status; } -static inline unsigned short get_dma_curr_xcount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_xcount(unsigned int channel) { return dma_ch[channel].regs->curr_x_count; } -static inline unsigned short get_dma_curr_ycount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_ycount(unsigned int channel) { return dma_ch[channel].regs->curr_y_count; } @@ -184,7 +281,7 @@ static inline void *get_dma_curr_desc_ptr(unsigned int channel) { return dma_ch[channel].regs->curr_desc_ptr; } -static inline unsigned short get_dma_config(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_config(unsigned int channel) { return dma_ch[channel].regs->cfg; } @@ -203,8 +300,8 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize dma_ch[channel].regs->next_desc_ptr = sg; dma_ch[channel].regs->cfg = - (dma_ch[channel].regs->cfg & ~(0xf << 8)) | - ((ndsize & 0xf) << 8); + (dma_ch[channel].regs->cfg & ~NDSIZE) | + ((ndsize << NDSIZE_OFFSET) & NDSIZE); } static inline int dma_channel_active(unsigned int channel) @@ -239,7 +336,7 @@ static inline void dma_enable_irq(unsigned int channel) } static inline void clear_dma_irqstat(unsigned int channel) { - dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR; + dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR | DMA_PIRQ; } void *dma_memcpy(void *dest, const void *src, size_t count); diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h index 73fe53e7fd24..5395088b2d0e 100644 --- a/arch/blackfin/include/asm/fixed_code.h +++ b/arch/blackfin/include/asm/fixed_code.h @@ -29,24 +29,28 @@ extern void sigreturn_stub(void); #endif #endif -#define FIXED_CODE_START 0x400 +#ifndef CONFIG_PHY_RAM_BASE_ADDRESS +#define CONFIG_PHY_RAM_BASE_ADDRESS 0x0 +#endif + +#define FIXED_CODE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) -#define SIGRETURN_STUB 0x400 +#define SIGRETURN_STUB (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) -#define ATOMIC_SEQS_START 0x410 +#define ATOMIC_SEQS_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) -#define ATOMIC_XCHG32 0x410 -#define ATOMIC_CAS32 0x420 -#define ATOMIC_ADD32 0x430 -#define ATOMIC_SUB32 0x440 -#define ATOMIC_IOR32 0x450 -#define ATOMIC_AND32 0x460 -#define ATOMIC_XOR32 0x470 +#define ATOMIC_XCHG32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) +#define ATOMIC_CAS32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x420) +#define ATOMIC_ADD32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x430) +#define ATOMIC_SUB32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x440) +#define ATOMIC_IOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x450) +#define ATOMIC_AND32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x460) +#define ATOMIC_XOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x470) -#define ATOMIC_SEQS_END 0x480 +#define ATOMIC_SEQS_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) -#define SAFE_USER_INSTRUCTION 0x480 +#define SAFE_USER_INSTRUCTION (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) -#define FIXED_CODE_END 0x490 +#define FIXED_CODE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x490) #endif diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 7202404966f6..b93474d5be75 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -7,14 +7,15 @@ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H -#include -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT) +#define MAP_NR(addr) ((unsigned long)(addr) >> PAGE_SHIFT) #define VM_DATA_DEFAULT_FLAGS \ (VM_READ | VM_WRITE | \ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#include #include #include diff --git a/arch/blackfin/kernel/bfin_dma.c b/arch/blackfin/kernel/bfin_dma.c index 40c2ed61258e..b612324fb8da 100644 --- a/arch/blackfin/kernel/bfin_dma.c +++ b/arch/blackfin/kernel/bfin_dma.c @@ -45,9 +45,15 @@ static int __init blackfin_dma_init(void) atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; } +#ifdef CH_MEM_STREAM3_SRC + /* Mark MEMDMA Channel 3 as requested since we're using it internally */ + request_dma(CH_MEM_STREAM3_DEST, "Blackfin dma_memcpy"); + request_dma(CH_MEM_STREAM3_SRC, "Blackfin dma_memcpy"); +#else /* Mark MEMDMA Channel 0 as requested since we're using it internally */ request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); +#endif #if defined(CONFIG_DEB_DMA_URGENT) bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() @@ -204,6 +210,7 @@ EXPORT_SYMBOL(free_dma); # ifndef MAX_DMA_SUSPEND_CHANNELS # define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS # endif +# ifndef CONFIG_BF60x int blackfin_dma_suspend(void) { int i; @@ -213,7 +220,6 @@ int blackfin_dma_suspend(void) printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); return -EBUSY; } - if (i < MAX_DMA_SUSPEND_CHANNELS) dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; } @@ -230,7 +236,6 @@ void blackfin_dma_resume(void) for (i = 0; i < MAX_DMA_CHANNELS; ++i) { dma_ch[i].regs->cfg = 0; - if (i < MAX_DMA_SUSPEND_CHANNELS) dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; } @@ -238,6 +243,16 @@ void blackfin_dma_resume(void) bfin_write_DMAC_TC_PER(0x0111); #endif } +# else +int blackfin_dma_suspend(void) +{ + return 0; +} + +void blackfin_dma_resume(void) +{ +} +#endif #endif /** @@ -279,10 +294,10 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR; } - if (!bfin_read16(&src_ch->cfg)) + if (!DMA_MMR_READ(&src_ch->cfg)) break; - else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) { - bfin_write16(&src_ch->cfg, 0); + else if (DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE) { + DMA_MMR_WRITE(&src_ch->cfg, 0); break; } } @@ -295,22 +310,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size) /* Destination */ bfin_write32(&dst_ch->start_addr, dst); - bfin_write16(&dst_ch->x_count, size >> 2); - bfin_write16(&dst_ch->x_modify, 1 << 2); - bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR); + DMA_MMR_WRITE(&dst_ch->x_count, size >> 2); + DMA_MMR_WRITE(&dst_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&dst_ch->irq_status, DMA_DONE | DMA_ERR); /* Source */ bfin_write32(&src_ch->start_addr, src); - bfin_write16(&src_ch->x_count, size >> 2); - bfin_write16(&src_ch->x_modify, 1 << 2); - bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR); + DMA_MMR_WRITE(&src_ch->x_count, size >> 2); + DMA_MMR_WRITE(&src_ch->x_modify, 1 << 2); + DMA_MMR_WRITE(&src_ch->irq_status, DMA_DONE | DMA_ERR); /* Enable */ - bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32); - bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32); + DMA_MMR_WRITE(&src_ch->cfg, DMAEN | WDSIZE_32); + DMA_MMR_WRITE(&dst_ch->cfg, WNR | DI_EN_X | DMAEN | WDSIZE_32); /* Since we are atomic now, don't use the workaround ssync */ __builtin_bfin_ssync(); + +#ifdef CONFIG_BF60x + /* Work around a possible MDMA anomaly. Running 2 MDMA channels to + * transfer DDR data to L1 SRAM may corrupt data. + * Should be reverted after this issue is root caused. + */ + while (!(DMA_MMR_READ(&dst_ch->irq_status) & DMA_DONE)) + continue; +#endif } void __init early_dma_memcpy_done(void) @@ -336,6 +360,42 @@ void __init early_dma_memcpy_done(void) __builtin_bfin_ssync(); } +#ifdef CH_MEM_STREAM3_SRC +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S3_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S3_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S3_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S3_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S3_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S3_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S3_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D3_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D3_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D3_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D3_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D3_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D3_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D3_Y_MODIFY +#else +#define bfin_read_MDMA_S_CONFIG bfin_read_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_CONFIG bfin_write_MDMA_S0_CONFIG +#define bfin_write_MDMA_S_START_ADDR bfin_write_MDMA_S0_START_ADDR +#define bfin_write_MDMA_S_IRQ_STATUS bfin_write_MDMA_S0_IRQ_STATUS +#define bfin_write_MDMA_S_X_COUNT bfin_write_MDMA_S0_X_COUNT +#define bfin_write_MDMA_S_X_MODIFY bfin_write_MDMA_S0_X_MODIFY +#define bfin_write_MDMA_S_Y_COUNT bfin_write_MDMA_S0_Y_COUNT +#define bfin_write_MDMA_S_Y_MODIFY bfin_write_MDMA_S0_Y_MODIFY +#define bfin_write_MDMA_D_CONFIG bfin_write_MDMA_D0_CONFIG +#define bfin_write_MDMA_D_START_ADDR bfin_write_MDMA_D0_START_ADDR +#define bfin_read_MDMA_D_IRQ_STATUS bfin_read_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_IRQ_STATUS bfin_write_MDMA_D0_IRQ_STATUS +#define bfin_write_MDMA_D_X_COUNT bfin_write_MDMA_D0_X_COUNT +#define bfin_write_MDMA_D_X_MODIFY bfin_write_MDMA_D0_X_MODIFY +#define bfin_write_MDMA_D_Y_COUNT bfin_write_MDMA_D0_Y_COUNT +#define bfin_write_MDMA_D_Y_MODIFY bfin_write_MDMA_D0_Y_MODIFY +#endif + /** * __dma_memcpy - program the MDMA registers * @@ -358,8 +418,8 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u */ __builtin_bfin_ssync(); - if (bfin_read_MDMA_S0_CONFIG()) - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S_CONFIG()) + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) continue; if (conf & DMA2D) { @@ -374,39 +434,42 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u u32 shift = abs(dmod) >> 1; size_t ycnt = cnt >> (16 - shift); cnt = 1 << (16 - shift); - bfin_write_MDMA_D0_Y_COUNT(ycnt); - bfin_write_MDMA_S0_Y_COUNT(ycnt); - bfin_write_MDMA_D0_Y_MODIFY(dmod); - bfin_write_MDMA_S0_Y_MODIFY(smod); + bfin_write_MDMA_D_Y_COUNT(ycnt); + bfin_write_MDMA_S_Y_COUNT(ycnt); + bfin_write_MDMA_D_Y_MODIFY(dmod); + bfin_write_MDMA_S_Y_MODIFY(smod); } - bfin_write_MDMA_D0_START_ADDR(daddr); - bfin_write_MDMA_D0_X_COUNT(cnt); - bfin_write_MDMA_D0_X_MODIFY(dmod); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D_START_ADDR(daddr); + bfin_write_MDMA_D_X_COUNT(cnt); + bfin_write_MDMA_D_X_MODIFY(dmod); + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_START_ADDR(saddr); - bfin_write_MDMA_S0_X_COUNT(cnt); - bfin_write_MDMA_S0_X_MODIFY(smod); - bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_S_START_ADDR(saddr); + bfin_write_MDMA_S_X_COUNT(cnt); + bfin_write_MDMA_S_X_MODIFY(smod); + bfin_write_MDMA_S_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(DMAEN | conf); - bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | conf); + bfin_write_MDMA_S_CONFIG(DMAEN | conf); + if (conf & DMA2D) + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_Y | DMAEN | conf); + else + bfin_write_MDMA_D_CONFIG(WNR | DI_EN_X | DMAEN | conf); spin_unlock_irqrestore(&mdma_lock, flags); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) - if (bfin_read_MDMA_S0_CONFIG()) + while (!(bfin_read_MDMA_D_IRQ_STATUS() & DMA_DONE)) + if (bfin_read_MDMA_S_CONFIG()) continue; else return; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + bfin_write_MDMA_D_IRQ_STATUS(DMA_DONE | DMA_ERR); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_CONFIG(0); + bfin_write_MDMA_S_CONFIG(0); + bfin_write_MDMA_D_CONFIG(0); } /** @@ -448,8 +511,10 @@ static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) } size >>= shift; +#ifndef DMA_MMR_SIZE_32 if (size > 0x10000) conf |= DMA2D; +#endif __dma_memcpy(dst, mod, src, mod, size, conf); @@ -488,6 +553,9 @@ EXPORT_SYMBOL(dma_memcpy); */ void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) { +#ifdef DMA_MMR_SIZE_32 + _dma_memcpy(pdst, psrc, size); +#else size_t bulk, rest; bulk = size & ~0xffff; @@ -495,6 +563,7 @@ void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size) if (bulk) _dma_memcpy(pdst, psrc, bulk); _dma_memcpy(pdst + bulk, psrc + bulk, rest); +#endif return pdst; } EXPORT_SYMBOL(dma_memcpy_nocache); @@ -514,14 +583,14 @@ void *safe_dma_memcpy(void *dst, const void *src, size_t size) } EXPORT_SYMBOL(safe_dma_memcpy); -static void _dma_out(unsigned long addr, unsigned long buf, unsigned short len, +static void _dma_out(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, u16 size, u16 dma_size) { blackfin_dcache_flush_range(buf, buf + len * size); __dma_memcpy(addr, 0, buf, size, len, dma_size); } -static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, +static void _dma_in(unsigned long addr, unsigned long buf, unsigned DMA_MMR_SIZE_TYPE len, u16 size, u16 dma_size) { blackfin_dcache_invalidate_range(buf, buf + len * size); @@ -529,7 +598,7 @@ static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, } #define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ -void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned short len) \ +void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned DMA_MMR_SIZE_TYPE len) \ { \ _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ } \ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 02796b88443d..c6e800998126 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -58,7 +58,7 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(CONFIG_BF54x) +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) (struct gpio_port_t *)PORTA_FER, (struct gpio_port_t *)PORTB_FER, (struct gpio_port_t *)PORTC_FER, @@ -66,6 +66,7 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *)PORTE_FER, (struct gpio_port_t *)PORTF_FER, (struct gpio_port_t *)PORTG_FER, +#elif defined(CONFIG_BF54x) (struct gpio_port_t *)PORTH_FER, (struct gpio_port_t *)PORTI_FER, (struct gpio_port_t *)PORTJ_FER, @@ -210,7 +211,7 @@ static void port_setup(unsigned gpio, unsigned short usage) else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); -#elif defined(CONFIG_BF54x) +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) if (usage == GPIO_USAGE) gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); else @@ -299,7 +300,7 @@ static void portmux_setup(unsigned short per) pmux |= (function << offset); bfin_write_PORT_MUX(pmux); } -#elif defined(CONFIG_BF54x) +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) inline void portmux_setup(unsigned short per) { u16 ident = P_IDENT(per); @@ -377,7 +378,7 @@ static int portmux_group_check(unsigned short per) } #endif -#ifndef CONFIG_BF54x +#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -680,7 +681,7 @@ void bfin_gpio_pm_hibernate_restore(void) #endif -#else /* CONFIG_BF54x */ +#else /* CONFIG_BF54x || CONFIG_BF60x */ #ifdef CONFIG_PM int bfin_pm_standby_ctrl(unsigned ctrl) @@ -726,7 +727,7 @@ unsigned short get_gpio_dir(unsigned gpio) } EXPORT_SYMBOL(get_gpio_dir); -#endif /* CONFIG_BF54x */ +#endif /* CONFIG_BF54x || CONFIG_BF60x */ /*********************************************************** * @@ -783,7 +784,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { @@ -937,7 +938,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); } -#ifndef CONFIG_BF54x +#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } @@ -1110,7 +1111,7 @@ void bfin_gpio_irq_free(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); @@ -1138,13 +1139,13 @@ EXPORT_SYMBOL(bfin_gpio_direction_input); void bfin_gpio_irq_prepare(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) unsigned long flags; #endif port_setup(gpio, GPIO_USAGE); -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) flags = hard_local_irq_save(); __bfin_gpio_direction_input(gpio); hard_local_irq_restore(flags); @@ -1173,7 +1174,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); gpio_set_value(gpio, value); -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); @@ -1188,7 +1189,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); #else unsigned long flags; diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index 92f664826281..01232a13470d 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -105,6 +105,7 @@ DEFINE_SYSREG(seqstat, , ); DEFINE_SYSREG(syscfg, , CSYNC()); #define D_SYSREG(sr) debugfs_create_file(#sr, S_IRUSR|S_IWUSR, parent, NULL, &fops_sysreg_##sr) +#ifndef CONFIG_BF60x /* * CAN */ @@ -223,8 +224,10 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm __DMA(CURR_DESC_PTR, curr_desc_ptr); __DMA(CURR_ADDR, curr_addr); __DMA(IRQ_STATUS, irq_status); +#ifndef CONFIG_BF60x if (strcmp(pfx, "IMDMA") != 0) __DMA(PERIPHERAL_MAP, peripheral_map); +#endif __DMA(CURR_X_COUNT, curr_x_count); __DMA(CURR_Y_COUNT, curr_y_count); } @@ -568,7 +571,7 @@ bfin_debug_mmrs_uart(struct dentry *parent, unsigned long base, int num) #endif } #define UART(num) bfin_debug_mmrs_uart(parent, UART##num##_DLL, num) - +#endif /* CONFIG_BF60x */ /* * The actual debugfs generation */ @@ -740,7 +743,7 @@ static int __init bfin_debug_mmrs_init(void) D32(WPDACNT0); D32(WPDACNT1); D32(WPSTAT); - +#ifndef CONFIG_BF60x /* System MMRs */ #ifdef ATAPI_CONTROL parent = debugfs_create_dir("atapi", top); @@ -1873,7 +1876,7 @@ static int __init bfin_debug_mmrs_init(void) } #endif /* BF54x */ - +#endif /* CONFIG_BF60x */ debug_mmrs_dentry = top; return 0; diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index c0f4fe287eb6..2e3994b20169 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -95,7 +95,9 @@ void cpu_idle(void) idle(); rcu_idle_exit(); tick_nohz_idle_exit(); - schedule_preempt_disabled(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); } } @@ -329,12 +331,16 @@ int in_mem_const(unsigned long addr, unsigned long size, { return in_mem_const_off(addr, size, 0, const_addr, const_size); } +#ifdef CONFIG_BF60x +#define ASYNC_ENABLED(bnum, bctlnum) 1 +#else #define ASYNC_ENABLED(bnum, bctlnum) \ ({ \ (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \ bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \ 1; \ }) +#endif /* * We can't read EBIU banks that aren't enabled or we end up hanging * on the access to the async space. Make sure we validate accesses diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index b0434f89e8de..5272e6eefd92 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -22,6 +22,7 @@ __attribute__ ((__l1_text__, __noreturn__)) static void bfin_reset(void) { +#ifndef CONFIG_BF60x if (!ANOMALY_05000353 && !ANOMALY_05000386) bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20)); @@ -57,7 +58,6 @@ static void bfin_reset(void) if (__SILICON_REVISION__ < 1 && bfin_revid() < 1) bfin_read_SWRST(); #endif - /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -72,6 +72,10 @@ static void bfin_reset(void) while (1) /* Issue core reset */ asm("raise 1"); +#else + while (1) + bfin_write_RCU0_CTL(0x1); +#endif } __attribute__((weak)) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 2ad747e909fb..c113cfa459a7 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -550,7 +551,6 @@ static __init void memory_setup(void) { #ifdef CONFIG_MTD_UCLINUX unsigned long mtd_phys = 0; - unsigned long n; #endif unsigned long max_mem; @@ -594,9 +594,9 @@ static __init void memory_setup(void) mtd_size = PAGE_ALIGN(*((unsigned long *)(mtd_phys + 8))); # if defined(CONFIG_EXT2_FS) || defined(CONFIG_EXT3_FS) - n = ext2_image_size((void *)(mtd_phys + 0x400)); - if (n) - mtd_size = PAGE_ALIGN(n * 1024); + if (*((unsigned short *)(mtd_phys + 0x438)) == EXT2_SUPER_MAGIC) + mtd_size = + PAGE_ALIGN(*((unsigned long *)(mtd_phys + 0x404)) << 10); # endif # if defined(CONFIG_CRAMFS) @@ -612,7 +612,8 @@ static __init void memory_setup(void) /* ROM_FS is XIP, so if we found it, we need to limit memory */ if (memory_end > max_mem) { - pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20); + pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", + (max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); memory_end = max_mem; } } @@ -642,7 +643,8 @@ static __init void memory_setup(void) * doesn't exist, or we don't need to - then dont. */ if (memory_end > max_mem) { - pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20); + pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", + (max_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); memory_end = max_mem; } @@ -661,8 +663,8 @@ static __init void memory_setup(void) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; - printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); - printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); + printk(KERN_INFO "Board Memory: %ldMB\n", (physical_mem_end - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); + printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 20); printk(KERN_INFO "Memory map:\n" " fixedcode = 0x%p-0x%p\n" @@ -705,7 +707,7 @@ void __init find_min_max_pfn(void) int i; max_pfn = 0; - min_low_pfn = memory_end; + min_low_pfn = PFN_DOWN(memory_end); for (i = 0; i < bfin_memmap.nr_map; i++) { unsigned long start, end; @@ -748,8 +750,7 @@ static __init void setup_bootmem_allocator(void) /* pfn of the first usable page frame after kernel image*/ if (min_low_pfn < memory_start >> PAGE_SHIFT) min_low_pfn = memory_start >> PAGE_SHIFT; - - start_pfn = PAGE_OFFSET >> PAGE_SHIFT; + start_pfn = CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT; end_pfn = memory_end >> PAGE_SHIFT; /* @@ -794,8 +795,8 @@ static __init void setup_bootmem_allocator(void) } /* reserve memory before memory_start, including bootmap */ - reserve_bootmem(PAGE_OFFSET, - memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET, + reserve_bootmem(CONFIG_PHY_RAM_BASE_ADDRESS, + memory_start + bootmap_size + PAGE_SIZE - 1 - CONFIG_PHY_RAM_BASE_ADDRESS, BOOTMEM_DEFAULT); } @@ -844,13 +845,40 @@ static inline int __init get_mem_size(void) break; } switch (ddrctl & 0x30000) { - case DEVWD_4: ret *= 2; - case DEVWD_8: ret *= 2; - case DEVWD_16: break; + case DEVWD_4: + ret *= 2; + case DEVWD_8: + ret *= 2; + case DEVWD_16: + break; } if ((ddrctl & 0xc000) == 0x4000) ret *= 2; return ret; +#elif defined(CONFIG_BF60x) + u32 ddrctl = bfin_read_DDR0_CFG(); + int ret; + switch (ddrctl & 0xf00) { + case DEVSZ_64: + ret = 64 / 8; + break; + case DEVSZ_128: + ret = 128 / 8; + break; + case DEVSZ_256: + ret = 256 / 8; + break; + case DEVSZ_512: + ret = 512 / 8; + break; + case DEVSZ_1G: + ret = 1024 / 8; + break; + case DEVSZ_2G: + ret = 2048 / 8; + break; + } + return ret; #endif BUG(); } @@ -864,12 +892,14 @@ void __init setup_arch(char **cmdline_p) { u32 mmr; unsigned long sclk, cclk; + struct clk *clk; native_machine_early_platform_add_devices(); enable_shadow_console(); /* Check to make sure we are running on the right processor */ + mmr = bfin_cpuid(); if (unlikely(CPUID != bfin_cpuid())) printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n", CPU, bfin_cpuid(), bfin_revid()); @@ -890,6 +920,10 @@ void __init setup_arch(char **cmdline_p) memset(&bfin_memmap, 0, sizeof(bfin_memmap)); +#ifdef CONFIG_BF60x + /* Should init clock device before parse command early */ + clk_init(); +#endif /* If the user does not specify things on the command line, use * what the bootloader set things up as */ @@ -904,6 +938,7 @@ void __init setup_arch(char **cmdline_p) memory_setup(); +#ifndef CONFIG_BF60x /* Initialize Async memory banks */ bfin_write_EBIU_AMBCTL0(AMBCTL0VAL); bfin_write_EBIU_AMBCTL1(AMBCTL1VAL); @@ -913,6 +948,7 @@ void __init setup_arch(char **cmdline_p) bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); #endif +#endif #ifdef CONFIG_BFIN_HYSTERESIS_CONTROL bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15); bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15); @@ -921,8 +957,24 @@ void __init setup_arch(char **cmdline_p) ~HYST_NONEGPIO_MASK) | HYST_NONEGPIO); #endif +#ifdef CONFIG_BF60x + clk = clk_get(NULL, "CCLK"); + if (!IS_ERR(clk)) { + cclk = clk_get_rate(clk); + clk_put(clk); + } else + cclk = 0; + + clk = clk_get(NULL, "SCLK0"); + if (!IS_ERR(clk)) { + sclk = clk_get_rate(clk); + clk_put(clk); + } else + sclk = 0; +#else cclk = get_cclk(); sclk = get_sclk(); +#endif if ((ANOMALY_05000273 || ANOMALY_05000274) && (cclk >> 1) < sclk) panic("ANOMALY 05000273 or 05000274: CCLK must be >= 2*SCLK"); @@ -938,7 +990,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Hardware Trace %s and %sabled\n", (mmr & 0x1) ? "active" : "off", (mmr & 0x2) ? "en" : "dis"); - +#ifndef CONFIG_BF60x mmr = bfin_read_SYSCR(); printk(KERN_INFO "Boot Mode: %i\n", mmr & 0xF); @@ -980,7 +1032,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Recovering from Watchdog event\n"); else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - +#endif printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid()); @@ -1060,10 +1112,12 @@ subsys_initcall(topology_init); /* Get the input clock frequency */ static u_long cached_clkin_hz = CONFIG_CLKIN_HZ; +#ifndef CONFIG_BF60x static u_long get_clkin_hz(void) { return cached_clkin_hz; } +#endif static int __init early_init_clkin_hz(char *buf) { cached_clkin_hz = simple_strtoul(buf, NULL, 0); @@ -1075,6 +1129,7 @@ static int __init early_init_clkin_hz(char *buf) } early_param("clkin_hz=", early_init_clkin_hz); +#ifndef CONFIG_BF60x /* Get the voltage input multiplier */ static u_long get_vco(void) { @@ -1097,10 +1152,23 @@ static u_long get_vco(void) cached_vco *= msel; return cached_vco; } +#endif /* Get the Core clock */ u_long get_cclk(void) { +#ifdef CONFIG_BF60x + struct clk *cclk; + u_long cclk_rate; + + cclk = clk_get(NULL, "CCLK"); + if (IS_ERR(cclk)) + return 0; + + cclk_rate = clk_get_rate(cclk); + clk_put(cclk); + return cclk_rate; +#else static u_long cached_cclk_pll_div, cached_cclk; u_long csel, ssel; @@ -1120,12 +1188,66 @@ u_long get_cclk(void) else cached_cclk = get_vco() >> csel; return cached_cclk; +#endif } EXPORT_SYMBOL(get_cclk); +#ifdef CONFIG_BF60x +/* Get the bf60x clock of SCLK0 domain */ +u_long get_sclk0(void) +{ + struct clk *sclk0; + u_long sclk0_rate; + + sclk0 = clk_get(NULL, "SCLK0"); + if (IS_ERR(sclk0)) + return 0; + + sclk0_rate = clk_get_rate(sclk0); + clk_put(sclk0); + return sclk0_rate; +} +EXPORT_SYMBOL(get_sclk0); + +/* Get the bf60x clock of SCLK1 domain */ +u_long get_sclk1(void) +{ + struct clk *sclk1; + u_long sclk1_rate; + + sclk1 = clk_get(NULL, "SCLK1"); + if (IS_ERR(sclk1)) + return 0; + + sclk1_rate = clk_get_rate(sclk1); + clk_put(sclk1); + return sclk1_rate; +} +EXPORT_SYMBOL(get_sclk1); + +/* Get the bf60x DRAM clock */ +u_long get_dclk(void) +{ + struct clk *dclk; + u_long dclk_rate; + + dclk = clk_get(NULL, "DCLK"); + if (IS_ERR(dclk)) + return 0; + + dclk_rate = clk_get_rate(dclk); + clk_put(dclk); + return dclk_rate; +} +EXPORT_SYMBOL(get_dclk); +#endif + /* Get the System clock */ u_long get_sclk(void) { +#ifdef CONFIG_BF60x + return get_sclk0(); +#else static u_long cached_sclk; u_long ssel; @@ -1146,6 +1268,7 @@ u_long get_sclk(void) cached_sclk = get_vco() / ssel; return cached_sclk; +#endif } EXPORT_SYMBOL(get_sclk); diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c index 557e9fef406a..aeb8343eeb03 100644 --- a/arch/blackfin/kernel/shadow_console.c +++ b/arch/blackfin/kernel/shadow_console.c @@ -15,9 +15,9 @@ #include #include -#define SHADOW_CONSOLE_START (0x500) -#define SHADOW_CONSOLE_END (0x1000) -#define SHADOW_CONSOLE_MAGIC_LOC (0x4F0) +#define SHADOW_CONSOLE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x500) +#define SHADOW_CONSOLE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x1000) +#define SHADOW_CONSOLE_MAGIC_LOC (CONFIG_PHY_RAM_BASE_ADDRESS + 0x4F0) #define SHADOW_CONSOLE_MAGIC (0xDEADBEEF) static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 4698a9800522..84b5e3dbbcc8 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1141,7 +1141,8 @@ ENTRY(_schedule_and_signal_from_int) sti r0; /* finish the userspace "atomic" functions for it */ - r1 = FIXED_CODE_END; + r1.l = lo(FIXED_CODE_END); + r1.h = hi(FIXED_CODE_END); r2 = [sp + PT_PC]; cc = r1 <= r2; if cc jump .Lresume_userspace (bp); diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index 8b4d98854403..31515f0146f9 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -210,14 +210,12 @@ ENDPROC(__start) ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; - /* watchdog off for now */ p0.l = lo(WDOG_CTL); p0.h = hi(WDOG_CTL); r0 = 0xAD6(z); w[p0] = r0; ssync; - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 78daae084915..9cb85537bd2b 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -48,7 +48,7 @@ void __init paging_init(void) unsigned long zones_size[MAX_NR_ZONES] = { [0] = 0, - [ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT, + [ZONE_DMA] = (end_mem - CONFIG_PHY_RAM_BASE_ADDRESS) >> PAGE_SHIFT, [ZONE_NORMAL] = 0, #ifdef CONFIG_HIGHMEM [ZONE_HIGHMEM] = 0, @@ -60,7 +60,8 @@ void __init paging_init(void) pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem); - free_area_init(zones_size); + free_area_init_node(0, zones_size, + CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT, NULL); } asmlinkage void __init init_pda(void) @@ -75,9 +76,6 @@ asmlinkage void __init init_pda(void) valid pointers to it. */ memset(&cpu_pda[cpu], 0, sizeof(cpu_pda[cpu])); - cpu_pda[0].next = &cpu_pda[1]; - cpu_pda[1].next = &cpu_pda[0]; - #ifdef CONFIG_EXCEPTION_L1_SCRATCH cpu_pda[cpu].ex_stack = (unsigned long *)(L1_SCRATCH_START + \ L1_SCRATCH_LENGTH); @@ -109,10 +107,10 @@ void __init mem_init(void) totalram_pages = free_all_bootmem(); reservedpages = 0; - for (tmp = 0; tmp < max_mapnr; tmp++) + for (tmp = ARCH_PFN_OFFSET; tmp < max_mapnr; tmp++) if (PageReserved(pfn_to_page(tmp))) reservedpages++; - freepages = max_mapnr - reservedpages; + freepages = max_mapnr - ARCH_PFN_OFFSET - reservedpages; /* do not count in kernel image between _rambase and _ramstart */ reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; @@ -127,7 +125,7 @@ void __init mem_init(void) printk(KERN_INFO "Memory available: %luk/%luk RAM, " "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", - (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, + (unsigned long) freepages << (PAGE_SHIFT-10), (_ramend - CONFIG_PHY_RAM_BASE_ADDRESS) >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); } -- cgit v1.2.3-59-g8ed1b